Intermolecular Energy Gap-Induced Formation of High-Valent Cobalt Species in CoOOH Surface Layer on Cobalt Sulfides for Efficient Water Oxidation

High-efficiency electrochemical nitrate reduction to ammonia via boron-doped hydroxyl oxide cobalt induced electron delocalization

Electrochemical nitrate reduction to ammonia is a promising alternative strategy for producing valuable ammonia. This prospective route, however, is subject to a slow electrocatalytic rate, which resulted from the weak adsorption and activation of intermediate species, and the low density electron cloud of active centers. To address this issue, we developed a novel approach by doping boron into metal hydroxyl oxides to adjust the electronic structure of active centers, and consequently, led a significant improvement in the Faraday efficiency upto approaching 100 %, as well as an impressive ammonia yield upto approximately 23 mg/h mgcat-1 at -0.6 V vs. reversible hydrogen electrode (RHE). Experimental data in mechanism demonstrate that the doped boron play a crucial role in modulating the local electronic environment surrounding the active sites Co. In situ Raman and FTIR spectra provide evidences that boron facilitates the formation of deoxidation and hydrogenation intermediates. Additionally, density functional theory (DFT) calculations support the notion that boron doping enhances the adsorption capability of intermediates, reduces the reaction barrier, and facilitates the desorption of NH3.

Understanding the Role of Spin State in Cobalt Oxyhydroxides for Water Oxidation

Although the electronic state of catalysts is strongly corrected with their oxygen evolution reaction (OER) performances, understanding the role of spin state in dynamic electronic structure evolution during OER process is still challenging. Herein, we developed a spin state regulation strategy to boost the OER performance of CoOOH through elemental doping (CoMOOH, M=V, Cr, Mn, Co and Cu). Experimental results including magnetic characterization, in situ X-ray absorption spectroscopy, in situ Raman and density functional theory calculations unveil that Mn doping could successfully increase the Co sites from low spin state to intermediate spin state, leading to the largest lattice distortion and smallest energy gap between dxy and dz 2 orbitals among the obtained CoMOOH electrocatalysts. Benefiting from the promoted electron transfer from dxy to dz 2 orbital, facilitated formation of active high-valent *O-Co(IV) species at applied potential, and reduced energy barrier of rate-determining step, the CoMnOOH exhibits the highest OER performance. Our work provides significant insight into the correction between dynamic electronic structure evolution and OER performance by understanding the role of spin state regulation in metal oxyhydroxides, paving a new avenue for rational design of high-activity electrocatalysts.

Facet Engineering Boosts Interfacial Compatibility of Inorganic-Polymer Composites

The interfacial compatibility between inorganic particles and polymer is crucial for ensuring high performance of composites. Current efforts to improve interfacial compatibility preferentially rely on organic modification of inorganic particles, leading to their complex process, high costs, and short lifespans due to aging and decomposition of organic modifiers. However, the fabrication of inorganic particles free from organic modification that is highly compatible in polymer still remains a great challenge. Herein, a novel facet-engineered inorganic particle that exhibit high compatibility with widely used polymer interface without organic modification is reported. Theoretical calculations and experimental results show that (020) and (102) facets of inorganic particles modulate local coordination environment of Ca atoms, which in turn regulate d-orbital electron density of Ca atoms and electron transfer paths at interfaces between polymer and inorganic particles. This difference alters the molecular diffusion, orientation of molecular chains on surface of inorganic particles, further modulating interfacial compatibility of composites. Surprisingly, the facet-engineered inorganic particles show exceptional mechanical properties, especially for tensile strain at break, which increases by 395%, far superior to state-of-the-art composites counterparts. Thus, the method can offer a more benign approach to the general production of high-performance and low-cost polymer-inorganic composites for diverse potential applications.

Unleashing unprecedented activation of high-valent Ni and Fe charge dynamics in CeF3-NiFe layered double hydroxide heterostructure: Demonstrating oxygen evolution reaction at an extremely high current density

The efficacy of any electrochemical reaction hinges on the extent of interaction achievable between reactive intermediates and the electrocatalytic active site. Any weak adsorption of these intermediates on the metal's active site results in low oxygen evolution reaction (OER) rates, mainly when catalysed by the Ni-based layered double hydroxide. To tackle this challenge, a heterojunction consisting of nickel-iron layered double hydroxide (NiFe-LDH) and cerium trifluoride (CeF3) is synthesized. Both phases were developed in-situ to have an abundance of heterointerfaces. The charge transfer amid the NiFe-LDH and CeF3 phases is brought about via these heterointerfaces. As a result, the overall charge dynamics associated with nickel (Ni) and iron (Fe) atoms are somewhat increased, and an enhanced positive charge on the metal site makes it more active in grabbing the reactive species, thereby making the entire OER process faster. The CeF3-NiFeLDH catalyst reaches a current density of 1000 mA cm-2 at an overpotential of 340 mV. Such a high current density is highly significant for the industrial-scale production of the products. The catalyst demonstrated impressive durability, maintaining stable performance for 90 h while operating at 500 mA cm-2. The charge dynamics between both phases were thoroughly examined using X-ray photoelectron spectroscopy (XPS).

In Situ Reconstructing NiFe Oxalate Toward Overall Water Splitting

Surface reconstruction plays an essential role in electrochemical catalysis. The structures, compositions, and functionalities of the real catalytic species and sites generated by reconstruction, however, are yet to be clearly understood, for the metastable or transit state of most reconstructed structures. Herein, a series of NiFe oxalates (NixFe1- xC2O4, x = 1, 0.9, 0.7, 0.6, 0.5, and 0) are synthesized for overall water splitting electrocatalysis. Whilst NixFe1-xC2O4 shows great hydrogen evolution reaction (HER) activity, the in situ reconstructed NixFe1-xOOH exhibits outstanding oxygen evolution reaction (OER) activity. As identified by the in situ Raman spectroscopy and quasi-in situ X-ray absorption spectroscopy (XAS) techniques, reconstructions from NixFe1-xC2O4 into defective NixFe1-xOOH and finally amorphous NixFe1-xOOH active species (R-NixFe1-xOOH) are confirmed upon cyclic voltammetry processes. Specifically, the fully reconstructed R-Ni0.6Fe0.4OOH demonstrates the best OER activity (179 mV to reach 10 mA cm-2), originating from its abundant real active sites and optimal d-band center. Benefiting from the reconstruction, an alkaline electrolyzer composed of a Ni0.6Fe0.4C2O4 cathode and an in situ reconstructed R-Ni0.6Fe0.4OOH anode achieves a superb overall water splitting performance (1.52 V@10 mA cm-2). This work provides an in-depth structure-property relationship understanding on the reconstruction of catalysts and offers a new pathway to designing novel catalyst.

Sulfur-Vacancy Engineering Accelerates Rapid Surface Reconstruction in Ni-Co Bimetal Sulfide Nanosheet for Urea Oxidation Electrocatalysis

Developing a highly efficient catalyst for electrocatalytic urea oxidation reaction (UOR) is not only beneficial for the degradation of urea pollutants in wastewater but also provides a benign route for hydrogen production. Herein, a sulfur-vacancy (Sv) engineering is proposed to accelerate the formation of metal (oxy)hydroxide on the surface of Ni-Co bimetal sulfide nanosheet arrays on nickel foam (Sv-CoNiS@NF) for boosting the urea oxidation electrocatalysis. As a result, the obtained Sv-CoNiS@NF demonstrates an outstanding electrocatalytic UOR performance, which requires a low potential of only 1.397 V versus the reversible hydrogen electrode to achieve the current density of 100 mA cm-2. The ex situ Raman spectra and density functional theory calculations reveal the key roles of the Sv site and Co9S8 in promoting the electrocatalytic UOR performance. This work provides a new strategy for accelerating the transformation of electrocatalysts to active metallic (oxy)hydroxide for urea electrolysis via engineering the surface vacancies.

Novel amorphous FeOOH-modified Co9S8 nanosheets with enhanced catalytic activity in oxygen evolution reaction

Efficient oxygen evolution reaction (OER) is vital for water electrolysis and advanced hydrogen energy production. However, the sluggish kinetics of this reaction require significant overpotentials, leading to high energy consumption. Therefore, developing OER electrocatalysts with exceptional performance and long-term durability is crucial for enhancing the energy efficiency and cost-effectiveness of the hydrogen production process. In this research, novel FeOOH/Co9S8 catalysts were prepared through a two-step hydrothermal reaction followed by one-step electrodeposition on nickel foam for an alkaline OER. The as-obtained catalysts possessed abundant non-homogeneous interfaces between FeOOH and Co9S8 nanosheets, conducive to optimized coordination environments of Fe and Co sites by redistributing interfacial charges. This synergy strengthened the chemisorption of oxygenated intermediates, leading to accelerated reaction kinetics, abundant active sites, and enhanced OER performance. The optimized electrocatalyst FeOOH/Co9S8-15 achieved a current density of 10 mA cm-2 at an overpotential of 248 mV and good stability for over 140 h. This study presents a novel approach for producing compelling and durable alkaline dielectric OER electrocatalysts, which will be helpful in the future manufacturing of advanced energy devices.

Surface Cladding Engineering via Oxygen Sulfur Distribution for Stable Electrocatalytic Oxygen Production

Inevitable leaching and corrosion under anodic oxidative environment greatly restrict the lifespan of most catalysts with excellent primitive activity for oxygen production. Here, based on Fick' s Law, we present a surface cladding strategy to mitigate Ni dissolution and stabilize lattice oxygen triggering by directional flow of interfacial electrons and strong electronic interactions via constructing elaborately cladding-type NiO/NiS heterostructure with controlled surface thickness. Multiple in situ characterization technologies indicated that this strategy can effectively prevent the irreversible Ni ions leaching and inhibit lattice oxygen from participating in anodic reaction. Combined with density functional theory calculations, we reveal that the stable interfacial O-Ni-S arrangement can facilitate the accumulation of electrons on surficial NiO side and weaken its Ni-O covalency. This would suppress the overoxidation of Ni and simultaneously fixing the lattice oxygen, thus enabling catalysts with boosted corrosion resistance without sacrificing its activity. Consequently, this cladding-type NiO/NiS heterostructure exhibits excellent performance with a low overpotential of 256 mV after 500 h. Based on Fick's law, this work demonstrates the positive effect of surface modification through precisely adjusting of the oxygen-sulfur exchange process, which has paved an innovative and effective way to solve the instability problem of anodic oxidation.

Simultaneously Improving Energy Storage and Oxygen Evolution Reaction by Causing Regional Defects in MOF-on-MOF Derived Hollow Se-Doped CoP-Fe2P Heterojunctions

Doping heteroatoms into metal phosphides to modify their electronic structure is an effective method, but the incomplete exposure of active sites is its inherent drawback. In this experiment, both Se doping and P vacancies are simultaneously introduced into CoP-Fe2P (named CoFe-P-Se) to enhance the internal reactivity. Benefiting from the unique hollow porous structure derived from the MOF-on-MOF template, as well as the enhanced intrinsic activity achieved by P defects and Se doping, CoFe-P-Se exhibits a high specific capacitance of 8.41 F cm-2 at a current density of 2 mA cm-2 when used as a supercapacitor electrode. When assembled into a hybrid supercapacitor with activated carbon, the energy density reaches 0.488 mWh cm-2 at a power density of 1.534 mW cm-2, and the capacity retention after 5000 charge-discharge cycles is as high as 90.65%. As an oxygen evolution reaction (OER) electrode, the CoFe-P-Se electrode shows a low overpotential of only 230 mV at a current density of 10 mA cm-2 and 278 mV at 100 mA cm-2. Additionally, it exhibits excellent stability for over 50 h at a current density of 100 mA cm-2. The designed element doping and vacancy engineering in this work will provide an insight for constructing high-performance electrodes.

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn-Teller-Active Dopants for Improved Electrocatalytic Oxygen Evolution

Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ (t 2 g 3 e g 1 ${{t}_{2g}^{3}{e}_{g}^{1}}$ ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Inducing Intermolecular Oxygen Coupling by Introducing S and FeOOH on Co(OH)2 Nanoneedle Arrays for Industrial Water Oxidation

The design of electrocatalysts for oxygen evolution reaction (OER) remains a limitation of industrial hydrogen production by electrolysis of water. Excellent and stable OER catalysts can be developed by activating lattice oxygen and changing the reaction path. Herein, S and FeOOH on the Co(OH)2 nanoneedle arrays are introduced to construct a heterostructure (S-FeOOH/Co(OH)2/NF) as a proof of concept. Theoretical calculations and experimental suggest that the Co-O-Fe motif formed at the heterogeneous interface with the introduction of FeOOH, inducing electron transfer from Co to Fe, enhancing Co─O covalency and reducing intramolecular charge transfer energy, thereby stimulating direct intramolecular lattice oxygen coupling. Doping of S in FeOOH further accelerates electron transfer, improves lattice oxygen activity, and prevents dissolution of FeOOH. Consequently, the overpotential of S-FeOOH/Co(OH)2/NF is only 199 mV at 10 mA cm-2, and coupled with the Pt/C electrode can be up to 1 A cm-2 under 1.79 V and remain stable for over 120 h in an anion exchange membrane water electrolyzer (AEMWE). This work proposes a strategy for the design of efficient and stable electrocatalysts for industrial water electrolysis and promotes the commercialization of AEMWE.

Optical in situ deciphering of the surface reconstruction-assistant multielectron transfer event of single Co3O4 nanoparticles

Surface reconstruction determines the fate of catalytic sites on the near-surface during the oxygen evolution reaction. However, deciphering the conversion mechanism of various intermediate-states during surface reconstruction remains a challenge. Herein, we employed an optical imaging technique to draw the landscape of dynamic surface reconstruction on individual Co3O4 nanoparticles. By regulating the surface states of Co3O4 nanoparticles, we explored dynamic growth of the CoOx(OH)y sublayer on single Co3O4 nanoparticles and directly identified the conversion between two dynamics. Rich oxygen vacancies induced more active sites on the surface and prolonged surface reconstruction, which enhanced electrochemical redox and oxygen evolution. These results were further verified by in situ electrochemical extinction spectroscopy of single Co3O4 nanoparticles. We elucidate the heterogeneous evolution of surface reconstruction on individual Co3O4 nanoparticles and present a unique perspective to understand the fate of catalytic species on the nanosurface, which is of enduring significance for investigating the heterogeneity of multielectron-transfer events.

Bioinspired axial S-coordinated single-atom cobalt catalyst to efficient activate peroxymonosulfate for selective high-valent Co-Oxo species generation

The efficient activation and selective high-valent metal-oxo (HVMO) species generation remain challenging for peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) in water purification. The underlying mechanism of the activation pathway is ambiguous, leading to a massive dilemma in the control and regulation of HVMO species generation. Herein, bioinspired by the bio-oxidase structure of cytochrome P450, the axial coordination strategy was adopted to tailor a single-atom cobalt catalyst (CoN4S-CB) with an axial S coordination. CoN4S-CB high-selectively generated high-valent Co-Oxo species (Co(IV)=O) via PMS activation. Co(IV)=O demonstrated an ingenious oxygen atom transfer (OAT) reaction to achieve the efficient degradation of sulfamethoxazole (SMX), and this allowed robust operation in various complex environments. The axial S coordination modulated the 3d orbital electron distribution of the Co atom. Density functional theory (DFT) calculation revealed that the axial S coordination decreased the energy barrier for PMS desorption and lowered the free energy change (ΔG) for Co(IV)=O generation. CoN4S-PMS* had a narrow d-band close to the Fermi level, which enhanced charge transfer to accelerate the cleavage of O-O and O-H bonds in PMS. This work provides a broader perspective on the activator design with natural enzyme structure-like active sites to efficient activate PMS for selective HVMO species generation.

Electrochemically Induced Ru/CoOOH Synergistic Catalyst as Bifunctional Electrode Materials for Alkaline Overall Water Splitting

Efficient and affordable price bifunctional electrocatalysts based on transition metal oxides for oxygen and hydrogen evolution reactions have a balanced efficiency, but it remains a significant challenge to control their activity and durability. Herein, a trace Ru (0.74 wt.%) decorated ultrathin CoOOH nanosheets (≈4 nm) supported on the surface of nickel foam (Ru/CoOOH@NF) is rationally designed via an electrochemically induced strategy to effectively drive the electrolysis of alkaline overall water splitting. The as-synthesized Ru/CoOOH@NF electrocatalysts integrate the advantages of a large number of different HER (Ru nanoclusters) and OER (CoOOH nanosheets) active sites as well as strong in-suit structure stability, thereby exhibiting exceptional catalytic activity. In particular, the ultra-low overpotential of the HER (36 mV) and the OER (264 mV) are implemented to achieve 10 mA cm-2. Experimental and theoretical calculations also reveal that Ru/CoOOH@NF possesses high intrinsic conductivity, which facilitates electron release from H2O and H-OH bond breakage and accelerates electron/mass transfer by regulating the charge distribution. This work provides a new avenue for the rational design of low-cost and high-activity bifunctional electrocatalysts for large-scale water-splitting technology and expects to help contribute to the creation of various hybrid electrocatalysts.

Engineering hierarchical snowflake-like multi-metal selenide catalysts anchored on Ni foam for high-efficiency and stable overall water splitting

The development of excellent bifunctional electrocatalysts is an effective way to promote the industrial application of electrolytic water. In this work, a free-standing W-doped cobalt selenide (W-CoSe300/NF) electrocatalyst with a snowflake-like structure supported on nickel foam was prepared by a hydrothermal-selenization strategy. Benefiting from the high specific surface area of the 3D snowflake-like structure and the regulation of tungsten doping on the electronic structure of the metal active center, W-CoSe300/NF shows remarkable electrocatalytic water decomposition performance. In 1.0 M KOH, the W-CoSe300/NF electrocatalyst achieved an efficient HER and OER at a current density of 50 mA cm-2 with overpotentials as low as 84 mV and 283 mV, respectively. More importantly, W-CoSe300/NF acts as both the anode and cathode of the electrolytic tank, requiring only a potential of 1.54 V to obtain 10 mA cm-2 and can operate continuously for more than 120 hours at this current density. This study proposes a new way for the design of high efficiency and affordable bifunctional electrocatalysts.

Operando Spectroscopic Monitoring of Metal Chalcogenides for Overall Water Splitting: New Views of Active Species and Sites

Metal-based chalcogenides exhibit great promise for overall water splitting, yet their intrinsic catalytic reaction mechanisms remain to be fully understood. In this work, we employed operando X-ray absorption (XAS) and in situ Raman spectroscopy to elucidate the structure-activity relationships of low-crystalline cobalt sulfide (L-CoS) catalysts toward overall water splitting. The operando results for L-CoS catalyzing the alkaline hydrogen evolution reaction (HER) demonstrate that the cobalt centers in the bulk are predominantly coordinated by sulfur atoms, which undergo a kinetic structural rearrangement to generate metallic cobalt in S-Co-Co-S moieties as the true catalytically active species. In comparison, during the acidic HER, L-CoS undergoes local structural optimization of Co centers, and H2 production proceeds with adsorption/desorption of key intermediates atop the Co-S-Co configurations. Further operando characterizations highlight the crucial formation of high-valent Co4+ species in L-CoS for the alkaline oxygen evolution reaction (OER), and the formation of such active species was found to be far more facile than in crystalline Co3O4 and Co-LDH references. These insights offer a clear picture of the complexity of active species and site formation in different media, and demonstrate how their restructuring influences the catalytic activity.

Synthesis and Electrocatalytic Applications of Layer-Structured Metal Chalcogenides Composites

Featured with the attractive properties such as large surface area, unique atomic layer thickness, excellent electronic conductivity, and superior catalytic activity, layered metal chalcogenides (LMCs) have received considerable research attention in electrocatalytic applications. In this review, the approaches developed to synthesize LMCs-based electrocatalysts are summarized. Recent progress in LMCs-based composites for electrochemical energy conversion applications including oxygen reduction reaction, carbon dioxide reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, overall water splitting, and nitrogen reduction reaction is reviewed, and the potential opportunities and practical obstacles for the development of LMCs-based composites as high-performing active substances for electrocatalytic applications are also discussed. This review may provide an inspiring guidance for developing high-performance LMCs for electrochemical energy conversion applications.

Reversing the Interfacial Electric Field in Metal Phosphide Heterojunction by Fe-Doping for Large-Current Oxygen Evolution Reaction

Developing non-precious-metal electrocatalysts that can operate with a low overpotential at a high current density for industrial application is challenging. Heterogeneous bimetallic phosphides have attracted much interest. Despite high hydrogen evolution reaction (HER) performance, the ordinary oxygen evolution reaction (OER) performance hinders their practical use. Herein, it is shown that Fe-doping reverses and enlarges the interfacial electrical field at the heterojunction, turning the H intermediate favorable binding sites for HER into O intermediate favorable sites for OER. Specifically, the self-supported heterojunction catalysts on nickel foam (CoP@Ni2P/NF and Fe-CoP@Fe-Ni2P/NF) are readily synthesized. They only require the overpotentials of 266 and 274 mV to drive a large current density of 1000 mA cm-2 (j1000) for HER and OER, respectively. Furthermore, a water splitting cell equipped with these electrodes only requires a voltage of 1.724 V to drive j1000 with excellent durability, demonstrating the potential of industrial application. This work offers new insights on interfacial engineering for heterojunction catalysts.

Controllable Electronic Transfer Tailoring d-band Center via Cobalt-Oxygen-Bridged Ru/Fe Dual-sites for Boosted Oxygen Evolution

Rational tailoring of the electronic structure at the defined active center of reconstructed metal (oxy)hydroxides (MOOH) during oxygen evolution reaction (OER) remains a challenge. With the guidance of density functional theory (DFT), herein a dual-site regulatory strategy is reported to tailor the d-band center of the Co site in CoOOH via the controlled electronic transfer at the Ru─O─Co─O─Fe bonding structure. Through the bridged O2- site, electrons are vastly flowed from the t2g-orbital of the Ru site to the low-spin orbital of the Co site in the Ru-O-Co coordination and further transfer from the strong electron-electron repulsion of the Co site to the Fe site by the Co-O-Fe coordination, which balancing the electronic configuration of Co sites to weaken the over-strong adsorption energy barrier of OH* and O*, respectively. Benefiting from the highly active of the Co site, the constructed (Ru2Fe2Co6)OOH provide an extremely low overpotential of 248 mV and a Tafel slope of 32.5 mV dec-1 at 10 mA cm-2 accompanied by long durability in alkaline OER, far superior over the pristine and Co-O-Fe bridged CoOOH catalysts. This work provides guidance for the rational design and in-depth analysis of the optimized role of metal dual-sites.

Crystal Structure Regulation of CoSe2 Induced by Fe Dopant for Promoted Surface Reconstitution toward Energetic Oxygen Evolution Reaction

Most nonoxide catalysts based on transition metal elements will inevitably change their primitive phases under anodic oxidation conditions in alkaline media. Establishing a relationship between the bulk phase and surface evolution is imperative to reveal the intrinsic catalytic active sites. In this work, it is demonstrated that the introduction of Fe facilitates the phase transition of orthorhombic CoSe2 into its cubic counterpart and then accelerates the Co-Fe hydroxide layer generation on the surface during electrocatalytic oxygen evolution reaction (OER). As a result, the Fe-doped cubic CoSe2 catalyst exhibits a significantly enhanced activity with a considerable overpotential decrease of 79.9 and 66.9 mV to deliver 10 mA·cm-2 accompanied by a Tafel slope of 48.0 mV·dec-1 toward OER when compared to orthorhombic CoSe2 and Fe-doped orthorhombic CoSe2, respectively. Density functional theory (DFT) calculations reveal that the introduction of Fe on the surface hydroxide layers will tune electron density around Co atoms and raise the d-band center. These findings will provide deep insights into the surface reconstitution of the OER electrocatalysts based on transition metal elements.

Highly efficient anion exchange membrane water electrolyzers via chromium-doped amorphous electrocatalysts

In-depth comprehension and modulation of the electronic structure of the active metal sites is crucial to enhance their intrinsic activity of electrocatalytic oxygen evolution reaction (OER) toward anion exchange membrane water electrolyzers (AEMWEs). Here, we elaborate a series of amorphous metal oxide catalysts (FeCrOx, CoCrOx and NiCrOx) with high performance AEMWEs by high-valent chromium dopant. We discover that the positive effect of the transition from low to high valence of the Co site on the adsorption energy of the intermediate and the lower oxidation barrier is the key factor for its increased activity by synchrotron radiation in-situ techniques. Particularly, the CoCrOx anode catalyst achieves the high current density of 1.5 A cm-2 at 2.1 V and maintains for over 120 h with attenuation less than 4.9 mV h-1 in AEMWE testing. Such exceptional performance demonstrates a promising prospect for industrial application and providing general guidelines for the design of high-efficiency AEMWEs systems.

Real Active Site Identification of Co/Co3O4 Anchoring Ni-MOF Nanosheets with Fast OER Kinetics for Overall Water Splitting

Doping metals and constructing heterostructures are pivotal strategies to enhance the electrocatalytic activity of metal-organic frameworks (MOFs). Nevertheless, effectively designing MOF-based catalysts that incorporate both doping and multiphase interfaces poses a significant challenge. In this study, a one-step Co-doped and Co3O4-modified Ni-MOF catalyst (named Ni NDC-Co/CP) with a thickness of approximately 5.0 nm was synthesized by a solvothermal-assisted etching growth strategy. Studies indicate that the formation of the Co-O-Ni-O-Co bond in Ni NDC-Co/CP was found to facilitate charge density redistribution more effectively than the Co-O-Ni bimetallic synergistic effect in NiCo NDC/CP. The designating Ni NDC-Co/CP achieved superior oxygen evolution reaction (OER) activity (245 mV @ 10 mA cm-2) and robust long stability (100 h @ 100 mA cm-2) in 1.0 M KOH. Furthermore, the Ni NDC-Co/CP(+)||Pt/C/CP(-) displays pregnant overall water splitting performance, achieving a current density of 10 mA cm-2 at an ultralow voltage of 1.52 V, which is significantly lower than that of commercial electrolyzer using Pt/C and IrO2 electrode materials. In situ Raman spectroscopy elucidated the transformation of Ni NDC-Co to Ni(Co)OOH under an electric field. This study introduces a novel approach for the rational design of MOF-based OER electrocatalysts.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Boosting Efficient and Sustainable Alkaline Water Oxidation on a W-CoOOH-TT Pair-Sites Catalyst Synthesized via Topochemical Transformation

The development of facile methods for constructing highly active, cost-effective catalysts that meet ampere-level current density and durability requirements for an oxygen evolution reaction is crucial. Herein, a general topochemical transformation strategy is posited: M-Co9S8 single-atom catalysts (SACs) are directly converted into M-CoOOH-TT (M = W, Mo, Mn, V) pair-sites catalysts under the role of incorporating of atomically dispersed high-valence metals modulators through potential cycling. Furthermore, in situ X-ray absorption fine structure spectroscopy is used to track the dynamic topochemical transformation process at the atomic level. The W-Co9S8 breaks through the low overpotential of 160 mV at 10 mA cm-2. A series of pair-site catalysts exhibit a large current density of approaching 1760 mA cm-2 at 1.68 V vs reversible hydrogen electrode (RHE) in alkaline water oxidation and achieve a ≈240-fold enhancement in the normalized intrinsic activity compare to that reported CoOOH, and sustainable stability of 1000 h. Moreover, the O─O bond formation is confirmed via a two-site mechanism, supported by in situ synchrotron radiation infrared and density functional theory (DFT) simulations, which breaks the limit of adsorption-energy scaling relationship on conventional single-site.

Spin-Magnetic Effect of d-π Conjugation Polymer Enhanced O-H Cleavage in Water Oxidation

A deep understanding of the mechanism for the spin-magnetic effect on O-H cleavage is crucial for the development of new catalysts for water oxidation. Herein, we designed and synthesized the crystalline Fe-DABDT and Co-DABDT (DABDT = 2,5-diaminobenzene-1,4-dithiol) and optimized an effective magnetic moment to explore the role of the spin-magnetic effect in the regulation of water oxidation activity. It can be found that the OER activity of the catalyst is positively correlated with its effective magnetic moment. Under the external magnetic field, Fe-DABDT with more spin single electrons has a stronger spin-magnetic response to water oxidation than Fe/Co-DABDT and Co-DABDT. The increase in OER current of Fe-DABDT is nearly 2 times higher than that of Co-DABDT. Experimental and density functional theory studies show that magnetized Fe sites could realize nucleophilic reaction, accelerate the polarization of electron spin states, and promote the polar decomposition of O-H and the formation of the O-O bond. This study provides mechanistic insight into the spin-magnetic effect of oxygen evolution reaction and further understanding of the spin origin of catalytic activity, which is expected to improve the energy efficiency of hydrogen production.

Utilizing the oxygen-atom trapping effect of Co3O4 with oxygen vacancies to promote chlorite activation for water decontamination

Heterogeneous high-valent cobalt-oxo [≡Co(IV)=O] is a widely focused reactive species in oxidant activation; however, the relationship between the catalyst interfacial defects and ≡Co(IV)=O formation remains poorly understood. Herein, photoexcited oxygen vacancies (OVs) were introduced into Co3O4 (OV-Co3O4) by a UV-induced modification method to facilitate chlorite (ClO2-) activation. Density functional theory calculations indicate that OVs result in low-coordinated Co atom, which can directionally anchor chlorite under the oxygen-atom trapping effect. Chlorite first undergoes homolytic O-Cl cleavage and transfers the dissociated O atom to the low-coordinated Co atom to form reactive ≡Co(IV)=O with a higher spin state. The reactive ≡Co(IV)=O rapidly extracts one electron from ClO2- to form chlorine dioxide (ClO2), accompanied by the Co atom returning a lower spin state. As a result of the oxygen-atom trapping effect, the OV-Co3O4/chlorite system achieved a 3.5 times higher efficiency of sulfamethoxazole degradation (~0.1331 min-1) than the pristine Co3O4/chlorite system. Besides, the refiled OVs can be easily restored by re-exposure to UV light, indicating the sustainability of the oxygen atom trap. The OV-Co3O4 was further fabricated on a polyacrylonitrile membrane for back-end water purification, achieving continuous flow degradation of pollutants with low cobalt leakage. This work presents an enhancement strategy for constructing OV as an oxygen-atom trapping site in heterogeneous advanced oxidation processes and provides insight into modulating the formation of ≡Co(IV)=O via defect engineering.

Multiple synergies on cobalt-based spinel oxide nanowires for electrocatalytic oxygen evolution

Cobalt-based spinel oxides have excellent oxygen evolution reaction (OER) activities and are cheap to produce; however, they have limited commercial applications due to their poor electrical conductivities and weak stabilities. Herein, we soaked Co3-xNixO4 nanowires in NaBH4 solutions, which endowed Co3-xNixO4 with significant oxygen vacancy content and decorated BOx motifs outside the Co3-xNixO4 nanowires. X-ray photoelectron spectroscopy and in situ Raman data suggest that these evolutions improved the conductivity, hydrophilicity, and increased active sites of the spinel oxides, which synergistically boosted their overall OER performances. This improved performance made the optimized BOx-covered Co2.1Ni0.9O4 nanowires generate a current density of 10 mA cm-2 when used for the OER at an overpotential of only 307 mV, maintaining excellent stability at 50 mA cm-2 for 24 h. This study provides a facile method for designing cobalt-based spinel oxide OER catalysts.

Interface engineering of NiS/NiCo2S4 heterostructure with charge redistribution for boosting overall water splitting

Developing highly efficient bifunctional non-noble metal-based electrocatalysts is pivotal to fulfilling practical water electrolysis. In this work, NiS/NiCo2S4 heterostructured electrocatalysts are prepared through a simply controlling sulfurization process by employing a one-pot solvothermal strategy. The alteration of cobalt addition amount can affect the crystalline phase, morphology, and catalytic activity of the resulting heterostructured materials. The successful integration of NiS with NiCo2S4 is realized by deliberately tuning the cobalt addition amount. The resulting Co-Ni-S5:1 delivers high activity with low overpotentials of 198 and 259 mV to attain 10 mA cm-2 when used as electrocatalysts toward hydrogen evolution reaction and oxygen evolution reaction, respectively. Experimental and theoretical calculations evidence the strong interface coupling between NiS and NiCo2S4 leads to increased electronic conductivity, electron migration near lattice-matched interface and interfacial charge redistribution, thereof enhancing the reaction kinetics rate and activity. Moreover, the potential application is demonstrated by employing Co-Ni-S5:1 in a two-electrode electrolyzer which can efficiently catalyze water electrolysis and work stably for 100 h. This work not only provides highly efficient bifunctional heterostructured electrocatalysts by simply regulating the metal components in sulfides but also further broadens the application of interface engineering.

New insights into Co3O4-carbon nanotube membrane for enhanced water purification: Regulated peroxymonosulfate activation mechanism via nanoconfinement

Co-based peroxymonosulfate (PMS) activation system with fascinating catalytic performance has become a promising technology for water purification, but it always suffers from insufficient mass transfer, less exposed active sites and toxic metal leaching. In this work, a carbon nanotube membrane confining Co3O4 inside (Co3O4-in-CNT) was prepared and was coupled with PMS activation (catalytic membrane process) for sulfamethoxazole (SMX) removal. Compared with counterpart with surface-loaded Co3O4 (Co3O4-out-CNT), the Co3O4-in-CNT catalytic membrane process exhibited enhanced SMX removal (99.5% vs. 89.1%) within residence time of 2.89 s, reduced Co leaching (20 vs. 147 μg L-1) and more interestingly, the nonradical-to-radical mechanism transformation (from 1O2 and electron transfer to SO4•- and •OH). These phenomena were ascribed to the nanoconfinement effect in CNT, which enhanced mass transfer (2.80 × 10-4 vs. 5.98 × 10-5 m s-1), accelerated Co3+/Co2+ cycling (73.4% vs. 65.0%) and showed higher adsorption energy for PMS (cleavage of O-O bond). Finally, based on the generated abundant reactive oxygen species (ROS), the seven degradation pathways of SMX were formed in system.

Ambient γ-Rays-Mediated Noble-Metal Deposition on Defect-Rich Manganese Oxide for Glycerol-Assisted H2 Evolution at Industrial-Level Current Density

Developing novel synthesis technologies is crucial to expanding bifunctional electrocatalysts for energy-saving hydrogen production. Herein, we report an ambient and controllable γ-ray radiation reduction to synthesize a series of noble metal nanoparticles anchored on defect-rich manganese oxides (M@MnO2-x , M=Ru, Pt, Pd, Ir) for glycerol-assisted H2 evolution. Benefiting from the strong penetrability of γ-rays, nanoparticles and defect supports are formed simultaneously and bridged by metal-oxygen bonds, guaranteeing structural stability and active site exposure. The special Ru-O-Mn bonds activate the Ru and Mn sites in Ru@MnO2-x through strong interfacial coordination, driving glycerol electrolysis at low overpotential. Furthermore, only a low cell voltage of 1.68 V is required to achieve 0.5 A cm-2 in a continuous-flow electrolyzer system along with excellent stability. In situ spectroscopic analysis reveals that the strong interfacial coordination in Ru@MnO2-x balances the competitive adsorption of glycerol and OH* on the catalyst surface. Theoretical calculations further demonstrate that the defect-rich MnO2 support promotes the dissociation of H2 O, while the defect-regulated Ru sites promote deprotonation and hydrogen desorption, synergistically enhancing glycerol-assisted hydrogen production.

Unveiling the Electrolyte Cations Dependent Kinetics on CoOOH-Catalyzed Oxygen Evolution Reaction

The electrolyte cations-dependent kinetics have been widely observed in many fields of electrocatalysis, however, the exact mechanism of the influence on catalytic performance is still a controversial topic of considerable discussion. Herein, combined with operando X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM), we verify that the electrolyte cations could intercalate into the layer of pristine CoOOH catalyst during the oxygen evolution reaction (OER) process, while the bigger cations lead to enlarged interlayer spacing and increased OER activity, following the order Cs+ >K+ >Na+ >Li+ . X-ray absorption spectroscopy (XAS), in situ Raman, in situ Ultraviolet-visible (UV/Vis) spectroscopy, in situ XAS spectroscopy, cyclic voltammetry (CV), and theoretical calculations reveal that the intercalation of electrolyte cations efficiently modify the oxidation states of Co by enlarging the Co-O bonds, which in turn enhance the d-band center of Co, optimize the adsorption strength of oxygen intermediates, facilitate the formation of OER active Co(IV) species, and reduce the energy barrier of the rate-determing step (RDS), thereby enhancing the OER activity. This work not only provides an informative picture to understand the complicated dependence of OER kinetics on electrolyte cations, but also sheds light on understanding the mechanism of other electrolyte cation-targeted electrocatalysis.

Design of polymetallic sulfide NiS2@Co4S3@FeS as bifunctional catalyst for high efficiency seawater splitting

The shortage of freshwater resources in the world today has limited the development of water splitting, and our eyes have turned to the abundant seawater. The development of relatively low-toxicity and high-efficiency catalysts is the most important area in seawater electrolysis. In this paper, the preparation of NiS2@Co4S3@FeS via a hydrothermal method on nickel foam has been studied for the first time. In the process of vulcanization, Fe will first generate FeS by virtue of its high affinity for vulcanization. Once Fe is vulcanized, the residual sulfur will be used to generate NiS2, while the vulcanization of Co requires a higher sulfur concentration and reaction temperature; thus, Co4S3 will be generated last. NiS2@Co4S3@FeS is confirmed to have excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic properties in alkaline seawater. Its unique structure allows it to expose more reaction centres, and the synergies between the multiple metals optimize the charge distribution of the material and accelerate the OER and HER kinetics. NiS2@Co4S3@FeS requires overpotentials of only 122 mV and 68 mV for the OER and HER when reaching 10 mA cm-2, which is superior to most catalysts reported to date for seawater electrolysis, and the material displays acceptable stability. In an electrolytic cell composed of both positive and negative electrodes, when the current density is 10 mA cm-2, the NiS2@Co4S3@FeS material displays a low overpotential of only 357 mV for seawater splitting. Density functional theory shows that the FeS electrode has the optimum Gibbs free energy of H to accelerate reaction kinetics, and the synergistic catalysis of the NiS2, Co4S3 and FeS materials promotes the hydrogen production activity of the NiS2@Co4S3@FeS electrode. This work proposes a novel idea for designing environmentally friendly seawater splitting catalysts.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Dual-Ligand Strategy to Construct Metal Organic Gel Catalyst with the Optimized Electronic Structure for High-Efficiency Overall Water Splitting and Flexible Metal-Air Battery

Non-noble metal catalysts are known for their efficient catalytic performance for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). Metal organic gels (MOGs) can be considered as a promising electrocatalyst owing to the diverse physicochemical properties but usually suffer from its poor electrical conductivity and catalytic stability. Here, a FeCo-MOG is constructed with considerable trifunctional activity. The optimal P-CoFe-H3 prepared by using phytic acid (PA) and 2,4,6-Tris[(p-carboxyphenyl)amino]-1,3,5-triazine benzoic acid (H3 TATAB) as dual ligands), exhibits outstanding ORR, OER, and HER activities as well as stability, exceeding most of state-of-the-art catalysts. As expected, the flexible Zn-air battery applied with P-CoFe-H3 as air cathode displays considerable power density, discharge voltage plateau, and cycling stability. Impressively, it is also capable of driving the overall water-splitting device by applying the P-CoFe-H3 as anode and cathode. Furthermore, theoretical calculations reveal that dual ligands can optimize the coordination environment and charge density of active sites, thereby reducing the absorption energy of intermediate species and boosting the catalytic performance. This work endows the dual-ligands coordination strategy with great potentiality for MOGs-based electrocatalysts in energy conversion devices.

Structural Design Induced Electronic Optimization in Single-Phase MoCoP Nanocrystal for Boosting Oxygen Reduction, Oxygen Evolution, and Hydrogen Evolution

Structural and compositional design of multifunctional materials is critical for electrocatalysis, but their rational modulation and effective synthesis remain a challenge. Herein, a controllable one-pot synthesis for construction of trifunctional sites and preparation of porous structures is adopted for synthesizing dispersed MoCoP sites on N, P codoped carbonized substance. This tunable synthetic strategy also endorses the exploration of the electrochemical activities of Mo (Co)-based unitary, Mo/Co-based dual and MoCo-based binary metallic sites. Eventually benefiting from the structural regulation, MoCoP-NPC shows excellent oxygen reduction abilities with a half-wave potential of 0.880 V, and outstanding oxygen evolution and hydrogen evolution performance with an overpotential of 316 mV and 91 mV, respectively. MoCoP-NPC-based Zn-air battery achieves excellent cycle stability for 300 h and a high open-circuit voltage of 1.50 V. When assembled in a water-splitting device, MoCoP-NPC reaches 10 mA cm-2 at 1.65 V. Theoretical calculations demonstrate that the Co atom in the single-phase MoCoP has a low energy barrier for oxygen evolution reaction (OER) owing to the migration of Co 3d orbital toward the Fermi level. This work shows a simplified method for controllable preparation of prominent trifunctional catalysts.

Reversely Trapping Isolated Atoms in High Oxidation State for Accelerating the Oxygen Evolution Reaction Kinetics

Developing efficient electrocatalysts for the oxygen evolution reaction (OER) is paramount to the energy conversion and storage devices. However, the structural complexity of heterogeneous electrocatalysts makes it a great challenge to elucidate the dynamic structural evolution and OER mechanisms. Here, we develop a controllable atom-trapping strategy to extract isolated Mo atom from the amorphous MoOx -decorated CoSe2 (a-MoOx @CoSe2 ) pre-catalyst into Co-based oxyhydroxide (Mo-CoOOH) through an ultra-fast self-reconstruction process during the OER process. This conceptual advance has been validated by operando characterizations, which reveals that the initially rapid Mo leaching can expedite the dynamic reconstruction of pre-catalyst, and simultaneously trap Mo species in high oxidation state into the lattice of in situ generated CoOOH support. Impressively, the OER kinetics of CoOOH has been greatly accelerated after the reverse decoration of Mo species, in which the Mo-CoOOH affords a markedly decreased overpotential of 297 mV at the current density of 100 mA cm-2 . Density functional theory (DFT) calculations demonstrate that the Co species have been greatly activated via the effective electron coupling with Mo species in high oxidation state. These findings open new avenues toward directly synthesizing atomically dispersed electrocatalysts for high-efficiency water splitting.

Sulfidation of CoCuOx Supported on Nickel Foam to Form a Heterostructure and Oxygen Vacancies for a High-Performance Anion-Exchange Membrane Water Electrolyzer

Anion-exchange membrane water electrolyzer (AEMWE) is attracting attention for hydrogen production owing to its ability to employ nonprecious metal catalysts and high energy conversion efficiency. Spinel-structured transition metal oxides exhibit excellent potential in oxygen evolution reaction (OERs). Nevertheless, the research on highly active and durable spinel-structured electrodes for the anodic OER of AEMWE is deficient. Herein, a self-supported S-CoCu oxide/nickel foam (S-CoCuOx/NF) anode was synthesized through a two-step method (electrodeposition and sulfidation). The formation of abundant oxygen vacancies and heterostructure collaboratively enhances the electron and mass transfer, resulting in an overpotential of 313 mV at 100 mA cm-2 for OER. For the lab-scale AEMWE system with the S-CoCuOx/NF anode, a current density of 1 A cm-2 was obtained at 1.87 V (cell voltage) with high durability for 110 h (1 A cm-2) at 60 °C. The results will provide insights into developing the spinel structure-derived anode for high-performance AEMWE.

Spatiotemporally and Chemically Resolved Imaging of Electrocatalytic Oxygen Evolution on Single Nanoplates of Cobalt-Layered Hydroxide

Transition metal-layered hydroxides have been extensively studied in order to address the key challenge of slow kinetics of the oxygen evolution reaction (OER). However, how the catalytically active sites are evolved and the corresponding heterogeneous structure-property relationship remain unclear. Herein, using cobalt-layered hydroxide as a representative catalyst, we report a strategy for the comprehensive in situ investigation of the electrocatalytic OER process at the single electrocatalyst level using combined electrochemiluminescence (ECL) and vis-absorption microscopy. The stepwise heterogeneous electrocatalytic responses of single-cobalt hydroxide nanoplates are unveiled with ECL imaging, and the corresponding valence state changes are revealed by vis-absorption imaging. The correlated in situ and ex situ multimode analyses indicate that, during the oxidation process, the Co2+ cations in the tetrahedral sites (CoTd2+) turned into CoTd3+ and even the highly unstable CoTd4+, assisted by the interlayer water in a metastable CoOOH·xH2O phase. Crucially, the CoTd4+ sites are mainly distributed in the inner part of the nanoplates and show superior electrocatalytic properties. The correlative single-particle imaging approach for electrocatalytic process analysis with high spatiotemporal and chemical resolution enables in-depth mechanistic insights to be generated and, in turn, will benefit the rational design of electrocatalysts with enhanced performance.

Surface Reconstruction of Covellite CuS Nanocrystals for Enhanced OER Catalytic Performance in Alkaline Solution

Oxygen evolution reaction (OER) is one of the important half-reactions in energy conversion equipment such as water-spitting devices, rechargeable metal-air batteries, and so on. It is beneficial to develop efficient and low-cost catalysts that understand the reaction mechanism of OER and analyze the reconstruction phenomenon of transition metal sulfide. Interestingly, copper sulfide and cuprous sulfide with the same components possess different reconstruction behaviors due to their different metal ion valence states and different atomic arrangement modes. Because of a unique atomic arrangement sequence and certain cationic defects, the reconstruction phenomenon of CuS nanomaterials are that S2- is firstly oxidized to SO4 2- and then Cux + is converted into CuO via Cu(OH)2 . In addition, the specific "modified hourglass structure" of CuS with excellent conductivity is easier to produce intermediates. Compared with Cu2 S, CuS exhibits excellent OER activity with a lower overpotential of 192 mV at 10 mA cm-2 and remarkable electrochemical stability in 1.0 m KOH for 120 h. Herein, this study elucidates the reconstruction modes of CuS and Cu2 S in the OER process and reveals that CuS has a stronger CuS bond and a faster electronic transmission efficiency due to "modified hourglass structure," resulting in faster reconstruction of CuS than Cu2 S.

Asymmetric gradient orbital interaction of hetero-diatomic active sites for promoting C - C coupling

Diatomic-site catalysts (DACs) garner tremendous attention for selective CO₂ photoreduction, especially in the thermodynamical and kinetical mechanism of CO₂ to C₂₊ products. Herein, we first engineer a novel Zn-porphyrin/RuCu-pincer complex DAC (ZnPor-RuCuDAC). The heteronuclear ZnPor-RuCuDAC exhibits the best acetate selectivity (95.1%), while the homoatomic counterparts (ZnPor-Ru₂DAC and ZnPor-Cu₂DAC) present the best CO selectivity. In-situ spectroscopic measurements reveal that the heteronuclear Ru-Cu sites easily appear C₁ intermediate coupling. The in-depth analyses confirm that due to the strong gradient orbital coupling of Ru4d-Cu3d resonance, two formed ^*CO intermediates of Ru-Cu heteroatom show a significantly weaker electrostatic repulsion for an asymmetric charge distribution, which result from a side-to-side absorption and narrow dihedral angle distortion. Moreover, the strongly overlapped Ru/Cu-d and CO molecular orbitals split into bonding and antibonding orbitals easily, resulting in decreasing energy splitting levels of C₁ intermediates. These results collectively augment the collision probability of the two ^*CO intermediates on heteronuclear DACs. This work first provides a crucial perspective on the symmetry-forbidden coupling mechanism of C₁ intermediates on diatomic sites.

Asymmetrically Coordinated CoB1 N3 Moieties for Selective Generation of High-Valence Co-Oxo Species via Coupled Electron-Proton Transfer in Fenton-like Reactions

High-valence metal species generated in peroxymonosulfate (PMS)-based Fenton-like processes are promising candidates for selective degradation of contaminants in water, the formation of which necessitates the cleavage of OH and OO bonds as well as efficient electron transfer. However, the high dissociation energy of OH bond makes its cleavage quite challenging, largely hampering the selective generation of reactive oxygen species. Herein, an asymmetrical configuration characterized by a single cobalt atom coordinated with boron and nitrogen (CoB₁ N₃ ) is established to offer a strong local electric field, upon which the cleavage of OH bond is thermodynamically favored via a promoted coupled electron-proton transfer process, which serves an essential step to further allow OO bond cleavage and efficient electron transfer. Accordingly, the selective formation of Co(IV)O in a single-atom Co/PMS system enables highly efficient removal performance toward various organic pollutants. The proposed strategy also holds true in other heteroatom doping systems to configure asymmetric coordination, thus paving alternative pathways for specific reactive species conversion by rationalized design of catalysts at atomic level toward environmental applications and more.

Remote Synergy between Heterogeneous Single Atoms and Clusters for Enhanced Oxygen Evolution

Integrating single atoms and clusters into one system is a novel strategy to achieve desired catalytic performances. Compared with homogeneous single-atom cluster catalysts, heterogeneous ones combine the merits of different species and therefore show greater potential. However, it is still challenging to construct single-atom cluster systems of heterogeneous species, and the underlying mechanism for activity improvement remains unclear. In this work, we developed a heterogeneous single-atom cluster catalyst (Co_nIr₁/N-C) for efficient oxygen evolution. The Ir single atoms worked in synergy with the Co clusters at a distance of about 8 Å, which optimized the configuration of the key intermediates. Consequently, the oxygen evolution activity was significantly improved on Co_nIr₁/N-C relative to the Co cluster catalyst (Co_n/N-C), exhibiting an overpotential lower by 107 mV than that of Co_n/N-C at 10 mA cm^-2 and a turnover frequency 50.9 times as much as that of Co_n/N-C at an overpotential of 300 mV.

Regulating electronic states of nitride/hydroxide to accelerate kinetics for oxygen evolution at large current density

Rational design efficient transition metal-based electrocatalysts for oxygen evolution reaction (OER) is critical for water splitting. However, industrial water-alkali electrolysis requires large current densities at low overpotentials, always limited by intrinsic activity. Herein, we report hierarchical bimetal nitride/hydroxide (NiMoN/NiFe LDH) array as model catalyst, regulating the electronic states and tracking the relationship of structure-activity. As-activated NiMoN/NiFe LDH exhibits the industrially required current density of 1000 mA cm^-2 at overpotential of 266 mV with 250 h stability for OER. Especially, in-situ electrochemical spectroscopic reveals that heterointerface facilitates dynamic structure evolution to optimize electronic structure. Operando electrochemical impedance spectroscopy implies accelerated OER kinetics and intermediate evolution due to fast charge transport. The OER mechanism is revealed by the combination of theoretical and experimental studies, indicating as-activated NiMoN/NiFe LDH follows lattice oxygen oxidation mechanism with accelerated kinetics. This work paves an avenue to develop efficient catalysts for industrial water electrolysis via tuning electronic states.

Introducing High-Valence Iridium Single Atoms into Bimetal Phosphides toward High-Efficiency Oxygen Evolution and Overall Water Splitting

Single atoms are superior electrocatalysts having high atomic utilization and amazing activity for water oxidation and splitting. Herein, this work reports a thermal reduction method to introduce high-valence iridium (Ir) single atoms into bimetal phosphide (FeNiP) nanoparticles toward high-efficiency oxygen evolution reaction (OER) and overall water splitting. The presence of high-valence single Ir atoms (Ir⁴⁺ ) and their synergistic interaction with Ni³⁺ species as well as the disproportionation of Ni³⁺ assisted by Fe collectively contribute to the exceptional OER performance. In specific, at appropriate Ir/Ni and Fe/Ni ratios, the as-prepared Ir-doped FeNiP (Ir₂₅ -Fe₁₆ Ni₁₀₀ P₆₄ ) nanoparticles at a mass loading of only 35 µg cm^-2 show the overpotential as low as 232 mV at 10 mA cm^-2 and activity as high as 1.86 A mg^-1 at 1.5 V versus RHE for OER in 1.0 m KOH. Computational simulations confirm the vital role of high-valence Ir to weaken the adsorption of OER intermediates, favorable for accelerating OER kinetics. Impressively, a Pt/C||Ir₂₅ -Fe₁₆ Ni₁₀₀ P₆₄ two-electrode alkaline electrolyzer affords a current density of 10 mA cm^-2 at a low cell voltage of 1.42 V, along with satisfied stability. An AA battery with a nominal voltage of 1.5 V can drive overall water splitting with obvious bubbles released.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Spinel-Derived Formation and Amorphization of Bimetallic Oxyhydroxides for Efficient Electrocatalytic Biomass Oxidation

Replacing the oxygen evolution reaction (OER) with water-assisted oxidation of organic molecules represents a promising approach for achieving sustainable electrochemical biomass utilization. Among numerous OER catalysts, spinels have received substantial attention due to their manifold compositions and valence states, yet their application in biomass conversions remains rare. Herein, a series of spinels were investigated for the selective electrooxidation of furfural and 5-hydroxymethylfurfural, two model substrates for versatile value-added chemical products. Spinel sulfides universally exhibit superior catalytic performance compared to that of spinel oxides, and further investigations show that the replacement of oxygen with sulfur led to the complete phase transition of spinel sulfides into amorphous bimetallic oxyhydroxides during electrochemical activation, serving as the active species. Excellent values of conversion rate (100%), selectivity (100%), faradaic efficiency (>95%), and stability were achieved via sulfide-derived amorphous CuCo-oxyhydroxide. Furthermore, a volcano-like correlation was established between their BEOR and OER activities based on an OER-assisted organic oxidation mechanism.

Reconstructured Electrocatalysts during Oxygen Evolution Reaction under Alkaline Electrolytes

The development of electrocatalysts with high-efficiency and clear structure-activity relationship towards the sluggish oxygen evolution reaction (OER) is essential for the wide application of water electrolyzers. Recently, the dynamic reconstruction phenomenon of the catalysts' surface structures during the OER process has been discovered. With the help of various advanced ex situ and in situ characterization, it is demonstrated that such surface reconstruction could yield actual active species to catalyze the water oxidation process. However, the attention and studies of potential interaction between reconstructed species and substrate are lacking. This review summarizes the recent development of typical reconstructed electrocatalysts and the substrate effect. First, the advanced characterization for electrocatalytic reconstruction is briefly discussed. Then, typical reconstructed electrocatalysts are comprehensively summarized and the key role of substrate effects during the OER process is emphasized. Finally, the future challenges and perspectives of surface reconstructed catalysts for water electrolysis are discussed.

Modulating the electronic structure of CoS2 by Sn doping boosting urea oxidation for efficient alkaline hydrogen production

Urea electrocatalytic oxidation afforded by renewable energies is highly promising to replace the sluggish oxygen evolution reaction in water splitting for hydrogen production while realizing the treatment of urea-rich waste water. Therefore, the development of efficient and cost-effective catalysts for water splitting assisted by urea is highly desirable. Herein, Sn-doped CoS₂ electrocatalysts were reported with the engineered electronic structure and the formation of Co-Sn dual active sites for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER), respectively. Consequently, the number of active sites and the intrinsic activity were enhanced simultaneously and the resultant electrodes exhibited outstanding electrocatalytic activity with a very low potential of 1.301 V at 10 mA·cm^-2 for UOR and an overpotential of 132 mV at 10 mA·cm^-2 for HER. Therefore, a two-electrode device was assembled by employing Sn(2)-CoS₂/CC and Sn(5)-CoS₂/CC and the constructed cell required only 1.45 V to approach a current density of 10 mA·cm^-2 along with good durability for at least 95 h assisted by urea. More importantly, the assembled electrolyzer can be powered by commercial dry battery to generate numerous gas bubbles on the surface of the electrodes, demonstrating the high potential of the as-fabricated electrodes for applications in hydrogen production and pollutant treatment at a low-voltage electrical energy input.