Nitrate-to-Ammonia Conversion at an InSn-Enriched Liquid-Metal Electrode

Electrochemical Selective Nitrate Reduction: Pathways to Nitrogen and Ammonia Production

Nitrate (NO3 -) contamination from industrial, agricultural, and anthropogenic activities poses significant risks to human health and ecosystems. While traditional NO3 - remediation methods are effective, they often generate secondary pollutants and incur high costs. Electrochemical NO3 -reduction (ECNR) offers a sustainable alternative, converting NO3 - into environmentally benign nitrogen (N2) or valuable ammonia (NH3). This review explores recent advancements in selective ECNR pathways for NO3 --to-N2and NO3 --to-NH3 conversion, focusing on mechanistic insights, electrocatalyst development, and optimization strategies. Key factors influencing ECNR performance, such as electrode materials, electrolyte composition, and hydrogen evolution inhibition, are discussed. Additionally, the review highlights the role of single-atom, bimetallic, and nanostructured catalysts in enhancing faradaic efficiency, total N2 removal, and selectivity, with particular attention to Pd-Cu systems. Strategies to address challenges like low selectivity and catalyst degradation are also explored. This review underscores the potential of ECNR as a viable alternative to the energy-intensive Haber-Bosch process for NH3 production, aligning with global sustainability goals. Finally, we identify research gaps and propose future directions for improving the efficiency, stability, and scalability of ECNR technologies.

Microwave-Powered Liquid Metal Degradation of Polyolefins

Upcycling waste plastics is highly promising to tackle global white pollution while achieving sustainable development. However, prevailing approaches often encounter challenges in scalable engineering practices due to either insufficient plastic upcycling capability or arduousness in the separation, recovery, and purification of catalysts, which inevitably augments the cost of plastic upcycling. Here, the microwave-powered liquid metal synergetic depolymerization is presented to facilitate low-cost plastic upcycling. By leveraging the fluidity of liquid metals and their exceptional chemical-bond activation ability under microwave field, this method efficiently converts various polyolefins into narrowband hydrocarbon oil (Oil yield: 81 wt.% for polypropylene (PP), 85.9 wt.% for polyethylene (PE)) and high-value olefin monomers (C2-4  selectivity: 50% for PE, 65.3% for PP) over 30 successive cycles, resulting in a high turnover frequency of 2.83 kgPlastic mLLiquid metal -1. These captivating advantages offered by electromagnetically-powered liquid metals are also supported by their self-separation features, thereby paving the way for large-scale engineering solutions in waste plastic upcycling.

Nitrate Electroreduction to Ammonia Over Copper-based Catalysts

The electrocatalytic reduction of nitrate (NO3 -) to ammonia (NH3) holds substantial promise, as it transforms NO3 - from polluted water into valuable NH3. However, the reaction is limited by sluggish kinetics and low NH3 selectivity. Cu-based catalysts with unique electronic structures demonstrate rapid NO3 - to NO2 - rate-determining step (RDS) and fast electrocatalytic nitrate reduction reaction (eNO3RR) kinetics among non-noble metal catalysts. Nonetheless, achieving high robustness and selectivity for NH3 with Cu-based catalysts remains a significant challenge. This review provides a comprehensive overview of the reaction mechanisms in eNO3RR, highlights how the structures of monometallic and bimetallic Cu-based catalyst affect catalytic properties, and discusses the current challenges as well as prospects in eNO3RR.

Carbon dots boost nitrate-to-ammonia conversion via hydrogen evolution control in CDs/Ag nanocomposites

We have developed a carbon dots/Ag (CDs/Ag) nanocomposite electrocatalyst for electrocatalytic nitrate reduction (NO3RR) to ammonia, achieving a remarkable NH3 faradaic efficiency (FE) of 98.48% and an ammonia yield rate of 198.12 μmol h-1 cm-2 at -0.93 V vs. RHE. Harnessing the CDs' ability to regulate the hydrogen evolution reaction (HER) and the presence of surface-active hydrogen (*H) on CDs/Ag effectively enhance the selectivity of silver nanomaterials toward ammonia synthesis.

Electrochemical Formation of Pb Microwires with Tunable Morphology on Liquid Metal Electrodes

Liquid metal electrodes based on Ga are an emerging area of interest given their fluid properties which can have significant impact on electrochemical processes. Here we study metal electrodeposition, namely lead electrodeposition on the liquid metal electrodes, gallium (Ga) and galinstan (GaInSn), which was performed in two different Pb2+ electrolytes (PbCl2 and Pb(NO3)2) to investigate any differences in the nature of the electrodeposit. Cyclic voltammetry and chronoamperometry were used to study the characteristics, kinetics, and nucleation and growth mechanisms of the electrodeposition process. Analysis of this electrochemical data, such as current density-time transients and diffusion coefficients under different potentials, revealed distinct behaviors for Pb deposition at each liquid metal and electrolyte, influencing the final morphology of the lead deposit. It was also found that the electrolyte concentration and deposition time were found to impact the morphology of the electrodeposited Pb. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed various types of Pb microstructures, including wire, branch-like, and flake-like formations, highlighting the differences in lead structural development when deposited on liquid gallium and Galinstan electrodes.

High-Density Atomically Dispersed Metals Activate Adjacent Nitrogen/Carbon Sites for Efficient Ammonia Electrosynthesis from Nitrate

While electrocatalytic reduction of nitrate to ammonia presents a sustainable solution for addressing both the environmental and energy issues within the nitrogen cycle, it remains a great challenge to achieve high selectivity and activity due to undesired side reactions and sluggish reaction kinetics. Here, we fabricate a series of metal-N-C catalysts that feature hierarchically ordered porous structure and high-density atomically dispersed metals (HD M1/PNC). Specifically, the as-prepared HD Fe1/PNC catalyst achieves an ammonia production rate of 21.55 mol gcat-1 h-1 that is at least 1 order of magnitude enhancement compared with that of the reported metal-N-C catalysts, while maintaining a 92.5% Faradaic efficiency when run at 500 mA cm-2 for 300 h. In addition to abundant active sites, such high performance benefits from the fact that the high-density Fe can more significantly activate the adjacent N/C sites through charge redistribution for improved water adsorption/dissociation, providing sufficient active hydrogen to Fe sites for nitrate ammoniation, compared with the low-density counterpart. This finding deepens the understanding of high-density metal-N-C materials at the atomic scale and may further be used for designing other catalysts.

Facet-Dependent Evolution of Active Components on Spinel Co3O4 for Electrochemical Ammonia Synthesis

Spinel cobalt oxides (Co3O4) have emerged as a promising class of catalysts for the electrochemical nitrate reduction reaction (eNO3RR) to ammonia, offering advantages such as low cost, high activity, and selectivity. However, the specific role of crystallographic facets in determining the catalysts' performance remains elusive, impeding the development of efficient catalysts. In this study, we have synthesized various Co3O4 nanostructures with exposed facets of {100}, {111}, {110}, and {112}, aiming to investigate the dependence of the eNO3RR activity on the crystallographic facets. Among the catalysts tested, Co3O4 {111} shows the best performance, achieving an ammonia Faradaic efficiency of 99.1 ± 1.8% with a yield rate of 35.2 ± 0.6 mg h-1 cm-2 at -0.6 V vs RHE. Experimental and theoretical results reveal a transformation process in which the active phases evolve from Co3O4 to Co3O4-x with oxygen vacancy (Ov), followed by a Co3O4-x-Ov/Co(OH)2 hybrid, and finally Co(OH)2. This process is observed for all facets, but the formation of Ov and Co(OH)2 is the most rapid on the (111) surface. The presence of Ov significantly reduces the free energy of the *NH2 intermediate formation from 1.81 to -0.53 eV, and plentiful active sites on the densely reconstructed Co(OH)2 make Co3O4 {111} an ideal catalyst for ammonia synthesis via eNO3RR. This work provides insights into the understanding of the realistic active components, offers a strategy for developing highly efficient Co-based spinel catalysts for ammonia synthesis through tuning the exposed facets, and helps further advance the design and optimization of catalysts in the field of eNO3RR.

Electrochemical Nitrate-to-Ammonia Conversion Enabled by Carbon-Decoration of Ni─GaOOH Synthesized via Plasma-Assisted CO2 Reduction

The release of nitrates into the environment leads to contaminated soil and water that poses a health risk to humans and animals. Due to the transition to renewable energy-based technologies, an electrochemical approach is an emerging option that can selectively produce valuable ammonia from nitrate sources. However, traditional metal-based electrocatalysts often suffer from low nitrate adsorption that reduces NH3 production rates. Here, a Ni-GaOOH-C/Ga electrocatalyst for electrochemical nitrate conversion into NH3 is synthesized via a low energy atmospheric-pressure plasma process that reduces CO2 into highly dispersed activated carbon on dispersed Ni─GaOOH particles produced from a liquid metal Ga─Ni alloy precursor. Nitrate conversion rates of up to 26.3 µg h-1 mg-1 cat are achieved with good stability of up to 20 h. Critically, the presence of carbon centers is central to improved performance where both Ni─C and NiO─C interfaces act as NO3- adsorption and reduction centers during the reaction. Density functional theory (DFT) calculations indicate that the NiO─C and Ni─C reaction sites reduce the Gibbs free energy required for NO3- reduction to NH3 compared to NiO and Ni. Importantly, catalysts without carbon centers do not produce NH3, emphasizing the unique effects of incorporating carbon nanoparticles into the electrocatalyst.

Copper-based electro-catalytic nitrate reduction to ammonia from water: Mechanism, preparation, and research directions

Global water bodies are increasingly imperiled by nitrate pollution, primarily originating from industrial waste, agricultural runoffs, and urban sewage. This escalating environmental crisis challenges traditional water treatment paradigms and necessitates innovative solutions. Electro-catalysis, especially utilizing copper-based catalysts, known for their efficiency, cost-effectiveness, and eco-friendliness, offer a promising avenue for the electro-catalytic reduction of nitrate to ammonia. In this review, we systematically consolidate current research on diverse copper-based catalysts, including pure Cu, Cu alloys, oxides, single-atom entities, and composites. Furthermore, we assess their catalytic performance, operational mechanisms, and future research directions to find effective, long-term solutions to water purification and ammonia synthesis. Electro-catalysis technology shows the potential in mitigating nitrate pollution and has strategic importance in sustainable environmental management. As to the application, challenges regarding complexity of the real water, the scale-up of the commerical catalysts, and the efficient collection of produced NH3 are still exist. Following reseraches of catalyst specially on long term stability and in situ mechanisms are proposed.

Amorphous Bismuth-Tin Oxide Nanosheets with Optimized C-N Coupling for Efficient Urea Synthesis

Closing the carbon and nitrogen cycles by electrochemical methods using renewable energy to convert abundant or harmful feedstocks into high-value C- or N-containing chemicals has the potential to transform the global energy landscape. However, efficient conversion avenues have to date been mostly realized for the independent reduction of CO2 or NO3-. The synthesis of more complex C-N compounds still suffers from low conversion efficiency due to the inability to find effective catalysts. To this end, here we present amorphous bismuth-tin oxide nanosheets, which effectively reduce the energy barrier of the catalytic reaction, facilitating efficient and highly selective urea production. With enhanced CO2 adsorption and activation on the catalyst, a C-N coupling pathway based on *CO2 rather than traditional *CO is realized. The optimized orbital symmetry of the C- (*CO2) and N-containing (*NO2) intermediates promotes a significant increase in the Faraday efficiency of urea production to an outstanding value of 78.36% at -0.4 V vs RHE. In parallel, the nitrogen and carbon selectivity for urea formation is also enhanced to 90.41% and 95.39%, respectively. The present results and insights provide a valuable reference for the further development of new catalysts for efficient synthesis of high-value C-N compounds from CO2.

Activation of Ga Liquid Catalyst with Continuously Exposed Active Sites for Electrocatalytic C-N Coupling

Environmentally friendly electrocatalytic coupling of CO2 and N2 for urea synthesis is a promising strategy. However, it is still facing problems such as low yield as well as low stability. Here, a new carbon-coated liquid alloy catalyst, Ga79Cu11Mo10@C is designed for efficient electrochemical urea synthesis by activating Ga active sites. During the N2 and CO2 co-reduction process, the yield of urea reaches 28.25 mmol h-1 g-1, which is the highest yield reported so far under the same conditions, the Faraday efficiency (FE) is also as high as 60.6 % at -0.4 V vs. RHE. In addition, the catalyst shows excellent stability under 100 h of testing. Comprehensive analyses showed that sequential exposure of a high density of active sites promoted the adsorption and activation of N2 and CO2 for efficient coupling reactions. This coupling reaction occurs through a thermodynamic spontaneous reaction between *N=N* and CO to form a C-N bond. The deformability of the liquid state facilitates catalyst recovery and enhances stability and resistance to poisoning. Moreover, the introduction of Cu and Mo stimulates the Ga active sites, which successfully synthesises the *NCON* intermediate. The reaction energy barrier of the third proton-coupled electron transfer process rate-determining step (RDS) *NHCONH→*NHCONH2 was lowered, ensuring the efficient synthesis of urea.

Polyoxometalate-Intercalated Tremella-Like CoNi-LDH Nanocomposites for Electrocatalytic Nitrite-Ammonia Conversion

The electrocatalytic reduction of NO2- (NO2RR) holds promise as a sustainable pathway to both promoting the development of emerging NH3 economies and allowing the closing of the NOx loop. Highly efficient electrocatalysts that could facilitate this complex six-electron transfer process are urgently desired. Herein, tremella-like CoNi-LDH intercalated by cyclic polyoxometalate (POM) anion P8W48 (P8W48/CoNi-LDH) prepared by a simple two-step hydrothermal-exfoliation assembly method is proposed as an effective electrocatalyst for NO2- to NH3 conversion. The introduction of POM with excellent redox ability tremendously increased the electrocatalytic performance of CoNi-LDH in the NO2RR process, causing P8W48/CoNi-LDH to exhibit large NH3 yield of 0.369 mmol h-1 mgcat-1 and exceptionally high Faradic efficiency of 97.0% at -1.3 V vs the Ag/AgCl reference electrode in 0.1 M phosphate buffer saline (PBS, pH = 7) containing 0.1 M NO2-. Furthermore, P8W48/CoNi-LDH demonstrated excellent durability during cyclic electrolysis. This work provides a new reference for the application of POM-based nanocomposites in the electrochemical reduction of NO2- to obtain value-added NH3.

RhNi Bimetallenes with Lattice-Compressed Rh Skin towards Ultrastable Acidic Nitrate Electroreduction

Harvesting recyclable ammonia (NH3 ) from acidic nitrate (NO3 - )-containing wastewater requires the utilization of corrosion-resistant electrocatalytic materials with high activity and selectivity towards acidic electrochemical nitrate reduction (NO3 ER). Herein, ultrathin RhNi bimetallenes with Rh-skin-type structure (RhNi@Rh BMLs) are fabricated towards acidic NO3 ER. The Rh-skin atoms on the surface of RhNi@Rh BMLs experience the lattice compression-induced strain effect, resulting in shortened Rh-Rh bond and downshifted d-band center. Experimental and theoretical calculation results corroborate that Rh-skin atoms can inhibit NO2 */NH2 * adsorption-induced Rh dissolution, contributing to the exceptional electrocatalytic durability of RhNi@Rh BMLs (over 400 h) towards acidic NO3 ER. RhNi@Rh BMLs also reveal an excellent catalytic performance, boasting a 98.4% NH3 Faradaic efficiency and a 13.4 mg h-1 mgcat -1 NH3 yield. Theoretical calculations reveal that compressive stress tunes the electronic structure of Rh skin atoms, which facilitates the reduction of NO* to NOH* in NO3 ER. The practicality of RhNi@Rh BMLs has also been confirmed in an alkaline-acidic hybrid zinc-nitrate battery with a 1.39 V open circuit voltage and a 10.5 mW cm-2 power density. This work offers valuable insights into the nature of electrocatalyst deactivation behavior and guides the development of high-efficiency corrosion-resistant electrocatalysts for applications in energy and environment.

Voltage-Driven Chemical Reactions Enable the Synthesis of Tunable Liquid Ga-Metal Nanoparticles

Nanosized particles of liquid metals are emerging materials that hold promise for applications spanning from microelectronics to catalysis. Yet, knowledge of their chemical reactivity is largely unknown. Here, we study the reactivity of liquid Ga and Cu nanoparticles under the application of a cathodic voltage. We discover that the applied voltage and the spatial proximity of these two particle precursors dictate the reaction outcome. In particular, we find that a gradual voltage ramp is crucial to reduce the native oxide skin of gallium and enable reactive wetting between the Ga and Cu nanoparticles; instead, a voltage step causes dewetting between the two. We determine that the use of liquid Ga/Cu nanodimer precursors, which consist of an oxide-covered Ga domain interfaced with a metallic Cu domain, provides a more uniform mixing and results in more homogeneous reaction products compared to a physical mixture of Ga and Cu NPs. Having learned this, we obtain CuGa2 alloys or solid@liquid CuGa2@Ga core@shell nanoparticles by tuning the stoichiometry of Ga and Cu in the nanodimer precursors. These products reveal an interesting complementarity of thermal and voltage-driven syntheses to expand the compositional range of bimetallic NPs. Finally, we extend the voltage-driven synthesis to the combination of Ga with other elements (Ag, Sn, Co, and W). By rationalizing the impact of the native skin reduction rate, the wetting properties, and the chemical reactivity between Ga and other metals on the results of such voltage-driven chemical manipulation, we define the criteria to predict the outcome of this reaction and set the ground for future studies targeting various applications for multielement nanomaterials based on liquid Ga.

Balanced NOx- and Proton Adsorption for Efficient Electrocatalytic NOx- to NH3 Conversion

Electrocatalytic nitrate (NO3-)/nitrite (NO2-) reduction reaction (eNOx-RR) to ammonia under ambient conditions presents a green and promising alternative to the Haber-Bosch process. Practically available NOx- sources, such as wastewater or plasma-enabled nitrogen oxidation reaction (p-NOR), typically have low NOx- concentrations. Hence, electrocatalyst engineering is important for practical eNOx-RR to obtain both high NH3 Faradaic efficiency (FE) and high yield rate. Herein, we designed balanced NOx- and proton adsorption by properly introducing Cu sites into the Fe/Fe2O3 electrocatalyst. During the eNOx-RR process, the H adsorption is balanced, and the good NOx- affinity is maintained. As a consequence, the designed Cu-Fe/Fe2O3 catalyst exhibits promising performance, with an average NH3 FE of ∼98% and an average NH3 yield rate of 15.66 mg h-1 cm-2 under the low NO3- concentration (32.3 mM) of typical industrial wastewater at an applied potential of -0.6 V versus reversible hydrogen electrode (RHE). With low-power direct current p-NOR generated NOx- (23.5 mM) in KOH electrolyte, the Cu-Fe/Fe2O3 catalyst achieves an FE of ∼99% and a yield rate of 15.1 mg h-1 cm-2 for NH3 production at -0.5 V (vs RHE). The performance achieved in this study exceeds industrialization targets for NH3 production by exploiting two available low-concentration NOx- sources.

Emerging Liquid Metal Catalysts

Catalysts serve pivotal roles in facilitating the development of sustainable energy systems on a global scale. Liquid metal usually refers to metal that is liquid below 330 °C, also known as low melting point metal. Liquid metal has emerged as an intriguing catalyst due to its commendable electrical conductivity, favorable fluidity, solubility in metals, phase transition capabilities, and modifiable oxide surface, thereby presenting a plethora of prospects for diverse catalytic reactions. In this Perspective, we elucidate the four primary merits of liquid metal catalysts: resistance to coking, the ability to tune elemental composition, the potential for structural transformation, and the capacity to inhibit coalescence. In light of this, a comprehensive summary is presented on the research advancements pertaining to liquid metal in methane pyrolysis, alkane dehydrogenation, carbon dioxide reduction, alcohol oxidation, and various other catalytic reactions. Finally, the challenges and prospects of liquid metal catalysts are elucidated.

Theoretical Evaluation of Highly Efficient Nitrate Reduction to Ammonia on InBi

Electrocatalytic reduction of nitrate to ammonia has become a popular approach for wastewater treatment and ammonia production. However, the development of highly efficient electrocatalysts remains a great challenge. Herein, we systematically studied the potential of InBi for nitrate reduction to ammonia (NRA) based on density functional theory (DFT) calculations. Our results reveal that InBi exhibits high activity for NRA via an O-end pathway, where the free energy evolution of all intermediates is downhill in the most favorable elementary steps. The activation of nitrate originates from the strong orbital hybridization between oxygen and indium atoms, leading to an enhanced charge transfer as well as NO₃^- adsorption. In particular, the competing hydrogen evolution reaction (HER) is effectively suppressed due to the weak adsorption of proton. Our study not only proves the great electrocatalytic potential of InBi as a novel catalyst for NRA but also points out a new way to design NRA electrocatalysts for practical applications.

Facile and Scalable Synthesis of Self-Supported Zn-Doped CuO Nanosheet Arrays for Efficient Nitrate Reduction to Ammonium

CuO has been regarded as a promising catalyst for the electrochemical reduction of nitrate (NO₃^-RR) to ammonium (NH₃); however, the intrinsic activity is greatly restricted by its poor electrical property. In this work, self-supported Zn-doped CuO nanosheet arrays (Zn-CuO NAs) are synthesized for NO₃^-RR, where the Zn dopant regulates the electronic structure of CuO to significantly accelerate the interfacial charge transfer and inner electron transport kinetics. The Zn-CuO NAs are constructed by a one-step etching of commercial brass (Cu₆₄Zn₃₆ alloy) in 0.1 M NaOH solution, which experiences a corrosion-oxidation-reconstruction process. Initially, the brass undergoes a dealloying procedure to produce nanosized Cu, which is immediately oxidized to the Cu₂O unit with a low valence state. Subsequently, Cu₂O is further oxidized to the CuO unit and reconstructed into nanosheets with the coprecipitation of Zn²⁺. For NO₃^-RR, Zn-CuO NAs show a high NH₃ production rate of 945.1 μg h^-1 cm^-2 and a Faradaic efficiency of up to 95.6% at -0.7 V in 0.1 M Na₂SO₄ electrolyte with 0.01 M NaNO₃, which outperforms the majority of the state-of-the-art catalysts. The present work offers a facile yet very efficient strategy for the scale-up synthesis of Zn-CuO NAs for high-performance NH₃ production from NO₃^-RR.

Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe2 TiO5 Nanofibers with Abundant Oxygen Vacancies

We propose the pseudobrookite Fe₂ TiO₅ nanofiber with abundant oxygen vacancies as a new electrocatalyst to ambiently reduce nitrate to ammonia. Such catalyst achieves a large NH₃ yield of 0.73 mmol h^-1  mg^-1 _cat. and a high Faradaic Efficiency (FE) of 87.6 % in phosphate buffer saline solution with 0.1 M NaNO₃ , which is lifted to 1.36 mmol h^-1  mg^-1 _cat. and 96.06 % at -0.9 V vs. RHE for nitrite conversion to ammonia in 0.1 M NaNO₂ . It also shows excellent electrochemical durability and structural stability. Theoretical calculation reveals the enhanced conductivity of this catalyst and an extremely low free energy of -0.28 eV for nitrate adsorption at the presence of vacant oxygen.

A self-healing electrocatalytic system via electrohydrodynamics induced evolution in liquid metal

Catalytic deterioration during electrocatalytic processes is inevitable for conventional composite electrodes, which are prepared by depositing catalysts onto a rigid current collector. In contrast, metals that are liquid at near room temperature, liquid metals (LMs), are potential electrodes that are uniquely flexible and maneuverable, and whose fluidity may allow them to be more adaptive than rigid substrates. Here we demonstrate a self-healing electrocatalytic system for CO₂ electroreduction using bismuth-containing Ga-based LM electrodes. Bi₂O₃ dispersed in the LM matrix experiences a series of electrohydrodynamic-induced structural changes when exposed to a tunable potential and finally transforms into catalytic bismuth, whose morphology can be controlled by the applied potential. The electrohydrodynamically-induced evolved electrode shows considerable electrocatalytic activity for CO₂ reduction to formate. After deterioration of the electrocatalytic performance, the catalyst can be healed via simple mechanical stirring followed by in situ regeneration by applying a reducing potential. With this procedure, the electrode's original structure and catalytic activity are both recovered.

Emerging p-Block-Element-Based Electrocatalysts for Sustainable Nitrogen Conversion

Artificial nitrogen conversion reactions, such as the production of ammonia via dinitrogen or nitrate reduction and the synthesis of organonitrogen compounds via C-N coupling, play a pivotal role in the modern life. As alternatives to the traditional industrial processes that are energy- and carbon-emission-intensive, electrocatalytic nitrogen conversion reactions under mild conditions have attracted significant research interests. However, the electrosynthesis process still suffers from low product yield and Faradaic efficiency, which highlight the importance of developing efficient catalysts. In contrast to the transition-metal-based catalysts that have been widely studied, the p-block-element-based catalysts have recently shown promising performance because of their intriguing physiochemical properties and intrinsically poor hydrogen adsorption ability. In this Perspective, we summarize the latest breakthroughs in the development of p-block-element-based electrocatalysts toward nitrogen conversion applications, including ammonia electrosynthesis from N₂ reduction and nitrate reduction and urea electrosynthesis using nitrogen-containing feedstocks and carbon dioxide. The catalyst design strategies and the underlying reaction mechanisms are discussed. Finally, major challenges and opportunities in future research directions are also proposed.

Electronic Metal-Support Interaction Triggering Interfacial Charge Polarization over CuPd/N-Doped-C Nanohybrids Drives Selectively Electrocatalytic Conversion of Nitrate to Ammonia

Selective electrocatalytic nitrate-to-ammonia conversion holds significant potential in treatment of nitrate wastewater and simultaneously produces high-value-added ammonia. However, today's development of nitrate-to-ammonia technology remains hindered by the lack of electrocatalysts with high activity and selectivity. In this work, metal-organic framework-derived CuPd bimetallic nanoparticles/nitrogen-doped carbon (CuPd/CN) hybrid nanoarrays for efficient ammonia electrosynthesis from nitrate are designed and synthesized. Systematic characterization reveals that the electronic metal-support interaction between the CuPd nanoparticles and N-doped nanocarbon matrix could trigger interfacial charge polarization over the CuPd/CN composite and make Cu sites electron deficient, which is conducive to the adsorption of nitrate ions. Moreover, the Pd atom sites separate by Cu atoms and could catalyze the dissociation of H₂ O molecules to form adsorbed H species, which evolves into hydrogen radicals and behaves as the dominant reactive species in accelerating nitrate-to-ammonia electrocatalysis. These advantages endow the CuPd/CN nanoarrays with high faradaic efficiency (96.16%), selectivity (92.08%) as well as excellent catalytic stability for electroreduction of nitrate to ammonia.

Electrochemical Upgrading of Formic Acid to Formamide via Coupling Nitrite Co-Reduction

Formic acid (HCOOH) can be exclusively prepared through CO₂ electroreduction at an industrial current density (0.5 A cm^-2). However, the global annual demand for formic acid is only ∼1 million tons, far less than the current CO₂ emission scale. The exploration of an economical and green approach to upgrading CO₂-derived formic acid is significant. Here, we report an electrochemical process to convert formic acid and nitrite into high-valued formamide over a copper catalyst under ambient conditions, which offers the selectivity from formic acid to formamide up to 90.0%. Isotope-labeled in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy and quasi in situ electron paramagnetic resonance results reveal the key C-N bond formation through coupling *CHO and *NH₂ intermediates. This work offers an electrochemical strategy to upgrade CO₂-derived formic acid into high-value formamide.

Nitrate-to-Ammonia Conversion at an InSn-Enriched Liquid-Metal Electrode

The renewable energy driven electrochemical conversion of nitrates to ammonia is emerging as a viable route for the creation of this hydrogen carrier. However, the creation of highly efficient electrocatalysts that show prolonged stability is an ongoing challenge. Here we show that room temperature liquid metal Galinstan can be used as an efficient and stable electrocatalyst for nitrate conversion to ammonia achieving rates of up to 2335 μg h⁻¹ cm⁻² with a Faradaic efficiency of 100 %. Density functional theory (DFT) calculations and experimental observation indicated the activity is due to InSn alloy enrichment within the liquid metal that occurs during the electrocatalytic reaction. This high selectivity for NH₃ is also due to additional suppression of the competing hydrogen evolution reaction at the identified In₃Sn active site. This work adds to the increasing applicability of liquid metals based on Ga for clean energy technologies.