Geometric morphometric analysis of red fox (Vulpes vulpes) skulls using radiometric techniques at three and six months of development

BACKGROUND

Morphological growth naturally progresses with age; however, the rate of growth varies across different parts of an organism, with certain structures developing more rapidly than others. This study aimed to analyze and compare the skull development of red foxes (Vulpes vulpes) during two specific developmental stages: the 3rd and 6th months, which represent distinct growth phases in their early ontogeny.

METHODS

In this study, we aimed to analyze and compare skull development in red foxes (Vulpes vulpes) during two specific post-natal time points: the 3rd and 6th months. Shape analysis was performed using radiographic images of nine red foxes at both the third and sixth months.

RESULTS

Shape differences were observed in the skulls of red foxes (Vulpes vulpes) at these two ages. Our findings confirmed the hypothesis that skull shape changes over time, reflecting distinct morphological adaptations associated with age-related growth. In the measurements at the 3rd month, the neurocranial region exhibited a more distinct and developed structure compared to the facial bones. Toward the 6th month, the skull displayed a thinner and more elongated structure with the further development of the facial bones.

CONCLUSIONS

This difference indicates a period of rapid growth and development in the neurocranial area, suggesting that red foxes experience significant neurological and sensory development early in life. Future studies on skull shape variation across different developmental stages in red foxes can expand on these findings. Age-related morphological studies, such as this one, provide essential baseline data on the natural growth and development of wild species like red foxes. This knowledge is essential for identifying deviations from normal development, which could result from environmental stressors, habitat changes, or malnutrition.

Tooth eruption status and bite force determine dental microwear texture gradients in albino rats (Rattus norvegicus forma domestica)

Dental microwear texture analysis (DMTA) is widely applied for inferring diet in vertebrates. Besides diet and ingesta properties, factors like wear stage and bite force may affect microwear formation, potentially leading to tooth position-specific microwear patterns. We investigated DMTA consistency along the upper cheek tooth row in young adult female rats at different growth stages, but with erupted adult dentitions. Bite forces for each molar (M) position were determined using muscle cross-sectional areas and lever arm mechanics. Rats were categorized into three size classes based on increasing skull length. Maximum bite force increased with size, while across all size classes, M3 bite force was almost 1.4 times higher than M1 bite force. In size class 1, M1 and M2 showed higher values than M3 for DMTA complexity, height, and volume parameters, while in size class 3, M1 had the lowest values. Comparing the same tooth position between size classes revealed opposing trends: M1 and M2 showed, for most parameters, decreasing roughness and complexity from size class 1-3, while M3 displayed the opposite trend, with size class 1 showing lowest, and either size class 2 or 3 the highest roughness and complexity values. This suggests that as rats age and M3 fully occludes, it becomes more utilized during mastication. DMTA, being a short-term diet proxy, is influenced by eruption and occlusion status changes. Our findings emphasize the importance of bite force and ontogenetic stage when interpreting microwear patterns and advise to select teeth in full occlusion for diet reconstruction.

Beyond CREA: Evolutionary patterns of non-allometric shape variation and divergence in a highly allometric clade of murine rodents

The shared functions of the skull are thought to result in common evolutionary patterns in mammalian cranial shape. Craniofacial evolutionary allometry (CREA) is a particularly prominent pattern where larger species display proportionally elongate facial skeletons and smaller braincases. It was recently proposed that CREA arises from biomechanical effects of cranial scaling when diets are similar. Thus, deviations from CREA should occur with changes in cranial biomechanics, for example due to dietary change. Here, we test this using 3D geometric morphometric analysis in a dataset of Australian murine crania, which are highly allometric. We contrast allometric and non-allometric variation in the cranium by comparing evolutionary mode, allometry, ordinations, as well as allometry, integration, and modularity in functional modules. We found evidence of stabilising selection in allometry-containing and size-free shape, and substantial non-allometric variation aligned with dietary specialisation in parallel with CREA. Integration among cranial modules was higher, and modularity lower, with size included, but integration between rostrum and cranial vault, which are involved in the CREA pattern, dropped dramatically after size removal. Our results thus support the hypothesis that CREA is a composite arising from selection on cranial function, with substantial non-allometric shape variation occurring alongside CREA where dietary specialisation impacts selection on gnawing function. This emphasises the need to research mammalian cranial evolution in the context of allometric and non-allometric selection on biomechanical function.

Linking the Mechanics of Chewing to Biology of the Junctional Epithelium

The capacity of a tissue to continuously alter its phenotype lies at the heart of how an animal is able to quickly adapt to changes in environmental stimuli. Within tissues, differentiated cells are rigid and play a limited role in adapting to new environments; however, differentiated cells are replenished by stem cells that are defined by their phenotypic plasticity. Here we demonstrate that a Wnt-responsive stem cell niche in the junctional epithelium is responsible for the capability of this tissue to quickly adapt to changes in the physical consistency of a diet. Mechanical input from chewing is required to both establish and maintain this niche. Since the junctional epithelium directly attaches to the tooth surface via hemidesmosomes, a soft diet requires minimal mastication, and consequently, lower distortional strains are produced in the tissue. This reduced strain state is accompanied by reduced mitotic activity in both stem cells and their progeny, leading to tissue atrophy. The atrophied junctional epithelium exhibits suboptimal barrier functions, allowing the ingression of bacteria into the underlying connective tissues, which in turn trigger inflammation and mild alveolar bone loss. These data link the mechanics of chewing to the biology of tooth-supporting tissues, revealing how a stem cell niche is responsible for the remarkable adaptability of the junctional epithelium to different diets.

Assessment of the mechanical role of cranial sutures in the mammalian skull: Computational biomechanical modelling of the rat skull

Cranial sutures are fibrocellular joints between the skull bones that are progressively replaced with bone throughout ontogeny, facilitating growth and cranial shape change. This transition from soft tissue to bone is reflected in the biomechanical properties of the craniofacial complex. However, the mechanical significance of cranial sutures has only been explored at a few localised areas within the mammalian skull, and as such our understanding of suture function in overall skull biomechanics is still limited. Here, we sought to determine how the overall strain environment is affected by the complex network of cranial sutures in the mammal skull. We combined two computational biomechanical methods, multibody dynamics analysis and finite element analysis, to simulate biting in a rat skull and compared models with and without cranial sutures. Our results show that including complex sutures in the rat model does not substantially change overall strain gradients across the cranium, particularly strain magnitudes in the bones overlying the brain. However, local variations in strain magnitudes and patterns can be observed in areas close to the sutures. These results show that, during feeding, sutures may be more important in some regions than others. Sutures should therefore be included in models that require accurate local strain magnitudes and patterns of cranial strain, particularly if models are developed for analysis of specific regions, such as the temporomandibular joint or zygomatic arch. Our results suggest that, for mammalian skulls, cranial sutures might be more important for allowing brain expansion during growth than redistributing biting loads across the cranium in adults.

Bite Force Performance from wild Derived mice has Undetectable Heritability Despite Having Heritable Morphological Components

Fitness-related traits tend to have low heritabilities. Conversely, morphology tends to be highly heritable. Yet, many fitness-related performance traits such as running speed or bite force depend critically on morphology. Craniofacial morphology correlates with bite performance in several groups including rodents. However, within species, this relationship is less clear, and the genetics of performance, morphology and function are rarely analyzed in combination. Here, we use a half-sib design in outbred wild-derived Mus musculus to study the morphology-bite force relationship and determine whether there is additive genetic (co-)variance for these traits. Results suggest that bite force has undetectable additive genetic variance and heritability in this sample, while morphological traits related mechanically to bite force exhibit varying levels of heritability. The most heritable traits include the length of the mandible which relates to bite force. Despite its correlation with morphology, realized bite force was not heritable, which suggests it is less responsive to selection in comparison to its morphological determinants. We explain this paradox with a non-additive, many-to-one mapping hypothesis of heritable change in complex traits. We furthermore propose that performance traits could evolve if pleiotropic relationships among the determining traits are modified.

From fibre to function: are we accurately representing muscle architecture and performance?

The size and arrangement of fibres play a determinate role in the kinetic and energetic performance of muscles. Extrapolations between fibre architecture and performance underpin our understanding of how muscles function and how they are adapted to power specific motions within and across species. Here we provide a synopsis of how this 'fibre to function' paradigm has been applied to understand muscle design, performance and adaptation in animals. Our review highlights the widespread application of the fibre to function paradigm across a diverse breadth of biological disciplines but also reveals a potential and highly prevalent limitation running through past studies. Specifically, we find that quantification of muscle architectural properties is almost universally based on an extremely small number of fibre measurements. Despite the volume of research into muscle properties, across a diverse breadth of research disciplines, the fundamental assumption that a small proportion of fibre measurements can accurately represent the architectural properties of a muscle has never been quantitatively tested. Subsequently, we use a combination of medical imaging, statistical analysis, and physics-based computer simulation to address this issue for the first time. By combining diffusion tensor imaging (DTI) and deterministic fibre tractography we generated a large number of fibre measurements (>3000) rapidly for individual human lower limb muscles. Through statistical subsampling simulations of these measurements, we demonstrate that analysing a small number of fibres (n < 25) typically used in previous studies may lead to extremely large errors in the characterisation of overall muscle architectural properties such as mean fibre length and physiological cross-sectional area. Through dynamic musculoskeletal simulations of human walking and jumping, we demonstrate that recovered errors in fibre architecture characterisation have significant implications for quantitative predictions of in-vivo dynamics and muscle fibre function within a species. Furthermore, by applying data-subsampling simulations to comparisons of muscle function in humans and chimpanzees, we demonstrate that error magnitudes significantly impact both qualitative and quantitative assessment of muscle specialisation, potentially generating highly erroneous conclusions about the absolute and relative adaption of muscles across species and evolutionary transitions. Our findings have profound implications for how a broad diversity of research fields quantify muscle architecture and interpret muscle function.

Quantifying bite force in coexisting tayassuids and feral suids: a comparison between morphometric functional proxies and in vivo measurements

Background

Measuring mammals’ bite force in laboratory conditions is not a simple task, let alone on wild medium-sized mammals in the field. Thus, morphometric-proxies are usually used to infer morphofunctional properties of musculoskeletal features. For instance, the study of bite force-indexes suggests that different capacities to crack food items reduce the competition between coexistent collared and white-lipped peccaries (Pecari tajacu and Tayassu pecari). The presence of exotic feral hogs (Sus scrofa) in peccaries’ endemic areas gives rise to new ecological interactions between them. An example is the Brazilian Pantanal wetland, where ecomorphological mechanisms may play a role in their ecological relations. Taking this scenario as a case of study, we aimed to verify if the morphometric-proxies are de facto reliable tools, by comparing bite forces-indexes with the in vivo bite forces of these species.

Methods

We captured 21 collared and white-lipped peccaries and feral hogs in the Brazilian Pantanal to assess their bite force at first molar. The Bite Force Measuring Tube (BiTu) is a robust and simple mechanical device designed to be used in field conditions. Only 11 individuals successfully bit the BiTu before being released. Their body measurements were compared and correlated with their bite force. The in vivo bite forces were compared with bite force-indexes of two papers based on independent morphometric methods and datasets: Sicuro & Oliveira (2002) used classic morphometrics to infer the bite forces of these three species in the Brazilian Pantanal, and Hendges et al. (2019) used geometric morphometrics to compare bite forces-indexes and feeding habits of the extant peccary species. The results of all species were standardized (Z-curves) according to each method. Doing so, we obtained comparable dimensionless comparable values but maintaining the differences between them.

Results

The morphometric-proxies-based studies presented similar results: collared peccaries present weaker bites than white-lipped peccaries and feral hogs, while these two species presented no significant differences in their bite force-indexes. The in vivo bite force results suggest the same relations predicted by the morphometric models, including the high variation among the feral hogs. We found a significant correlation between the individuals’ weight (kg) and their actual bite force (N) but no significant correlations with the head length.

Conclusions

The BiTu proved to be a functional and low-cost tool to measure bite force in field conditions. The in vivo results presented a good correspondence with the predictions based on morphometric-proxies by Sicuro & Oliveira (2002) and Hendges et al. (2019). The results denote that these studies succeed in capturing the biomechanical signal of the three species’ skull-jaw systems. This empirical validation confirms that these morphometric-proxies analyses are reliable methods to ecomorphological and evolutionary inferences.

The contribution of functional traits to the understanding of palaeoenvironmental changes

Performance traits implicated in feeding interact directly with the environment and are consequently relevant ecological indicators. However, they have rarely been used to better understand palaeoenvironmental variation. Here, we evaluate the usefulness of a performance (i.e. functional) trait, estimated bite force, in reconstructing the palaeoecology of shrews. We investigate the relationships between mandible morphology, bite force estimates and the ecological context. We use geometric morphometrics to quantify mandible shape diversity in shrews of the archaeological site El Harhoura 2 (Rabat, Morocco), dated from the Late Pleistocene to the Holocene. Morphological groups were used instead of taxa as units of diversity. To explore how phenotypic traits are linked to their environment, they were compared with palaeoenvironmental inferences for the El Harhoura 2 site extracted from the literature. Morphological groups acted as phenotypic response units. Estimated bite force was related to palaeoenvironmental variation over the considered period, with a particular sensibility to arid/humid transitions. The complementarity of morphological and performance indicators allowed us to infer functional convergence and divergence among shrews. Our results suggest that functional traits may be relevant indicators of changes in palaeoenvironments. This approach opens up new possibilities to explore the impact of environmental changes on extinct organisms.

Insectivory leads to functional convergence in a group of Neotropical rodents

The mandible of vertebrates serves as insertion area for masticatory muscles that originate on the skull, and its functional properties are subject to selective forces related to trophic ecology. The efficiency of masticatory muscles can be measured as mechanical advantage on the mandible, which, in turn, has the property of correlating with bite force and shape. In the present work, we quantify the mechanical advantage of the mandible of akodontine rodents, which present a diverse radiation of insectivorous specialists, to assess their relationship to the estimated bite force and diet. We also tested the degree of morphofunctional convergence in response to insectivory on the group. We found the mechanical advantages to be convergent on insectivorous species, and associated with the estimated bite force, with higher mechanical advantages in species with a stronger bite and short, robust mandibles and lower mechanical advantages in insectivorous species with weaker bites and more elongated, dorso-ventrally compressed mandibles. Insectivorous species of Akodontini are functional specialists for the consumption of live prey and may exploit the resources that shrews, moles and hedgehogs consume elsewhere.

Morphological divergence in giant fossil dormice

Insular gigantism-evolutionary increases in body size from small-bodied mainland ancestors-is a conceptually significant, but poorly studied, evolutionary phenomenon. Gigantism is widespread on Mediterranean islands, particularly among fossil and extant dormice. These include an extant giant population of Eliomys quercinus on Formentera, the giant Balearic genus †Hypnomys and the exceptionally large †Leithia melitensis of Pleistocene Sicily. We quantified patterns of cranial and mandibular shape and their relationships to head size (allometry) among mainland and insular dormouse populations, asking to what extent the morphology of island giants is explained by allometry. We find that gigantism in dormice is not simply an extrapolation of the allometric trajectory of their mainland relatives. Instead, a large portion of their distinctive cranial and mandibular morphology resulted from the population- or species-specific evolutionary shape changes. Our findings suggest that body size increases in insular giant dormice were accompanied by the evolutionary divergence of feeding adaptations. This complements other evidence of ecological divergence in these taxa, which span predominantly faunivorous to herbivorous diets. Our findings suggest that insular gigantism involves context-dependent phenotypic modifications, underscoring the highly distinctive nature of island faunas.

Mechano-adaptive Responses of Alveolar Bone to Implant Hyper-loading in a pre-clinical in vivo model

OBJECTIVES

Oral implants transmit biting forces to peri-implant bone. In turn, those forces subject peri-implant bone to mechanical stresses and strains. Here, our objective was to understand how peri-implant bone responded to conditions of normal versus hyper-loading in a mouse model.

MATERIAL AND METHODS

Sixty-six mice were randomly assigned to 2 groups; both groups underwent bilateral maxillary first molar extraction followed by complete healing. Titanium alloy implants were placed in healed sites and positioned below the occlusal plane. After osseointegration, a composite crown was affixed to the implant so masticatory loading would ensue. In controls, the remaining dentition was left intact but in the hyper-loaded (test) group, the remaining molars were extracted. 3D finite element analysis (FEA) calculated peri-implant strains resulting from normal and hyper-loading. Peri-implant tissues were analyzed at multiple time points using micro-computed tomography (µCT) imaging, histology, enzymatic assays of bone remodeling, and vital dye labeling to evaluate bone accrual.

RESULTS

Compared to controls, hyper-loaded implants experienced a 3.6-fold increase in occlusal force, producing higher peri-implant strains. Bone formation and resorption were both significantly elevated around hyper-loaded implants, eventually culminating in a significant increase in peri-implant bone volume/total volume (BV/TV). In our mouse model, masticatory hyper-loading of an osseointegrated implant was associated with increased peri-implant strain, increased peri-implant bone remodeling, and a net gain in bone deposition.

CONCLUSION

Hyper-loading results in bone strain with catabolic and anabolic bone responses, leading to a net gain in bone deposition.

Review of the methods used for calculating physiological cross-sectional area (PCSA) for ecological questions

This review examines literature that used physiological cross-sectional area (PCSA) as a representative measure of an individual muscle's maximal isometric force production. PCSA is used to understand the muscle architecture and how a trade-off between muscle force and muscle contractile velocity reflect adaptations of the musculoskeletal system as a reflection of functional demands. Over the decades, methods have been developed to measure muscle volume, fascicle lengths, and pennation angle to calculate PCSA. The advantages and limitations of these methods (especially the inclusion/elimination of pennation angle) are discussed frequently; however, these method descriptions are scattered throughout the literature. Here, we reviewed and summarised the different approaches to collecting and recording muscle architectural properties to subsequently calculate PCSA. By critically discussing the advantages and limitations of each methodology, we aim to provide readers with an overview of repeatable methods to assess muscle architecture. This review may serve as a guide to facilitate readers searching for the appropriate techniques to calculate PCSA and measure muscle architecture to be applied in ecomorphology research. RESEARCH HIGHLIGHTS: Discuss the theories behind PCSA in a synthesised review to inform researchers about PCSA methodology.

Decoupled ontogeny of in vivo bite force and mandible morphology reveals effects of weaning and sexual maturation in mice

The link between performance, morphology and their sources of variation is a major target of evolutionary functional biology. In vertebrates, many studies have linked in vivo bite force to skull morphology, mostly at the interspecific level. Within species, however, the ontogeny of bite force, in relation to the development of the mandible, remains poorly known, despite its relevance for life history and for the co-evolution of form and function. Here, ontogenetic trajectories of bite force, correlated with mandible size and shape, are reported for the first time in a wild-derived colony of laboratory mice. Bite forces were measured in vivo and mandible morphology was assessed using geometric morphometrics. Most coordinated changes in morphology and in vivo bite force occur during the first stages of growth, prior to weaning. Mandible shape stabilizes after day 23. The increases in mandible size and body mass slow down around day 40, but still increase during adulthood. Despite slowing down after weaning, bite force increases through a second phase during sexual maturation (days 30–40). This may be linked to the progressive tempering of weaning stress, continued growth and synchronization of the muscular and osteological systems, together with hormonal changes, as we observed a concomitant appearance of sexual dimorphism.

Functional diversity in biters: the evolutionary morphology of the oral jaw system in pacus, piranhas and relatives (Teleostei: Serrasalmidae)

Serrasalmid fishes form a highly specialized group of biters that show a large trophic diversity, ranging from pacus able to crush seeds to piranhas capable of cutting flesh. Their oral jaw system has been hypothesized to be forceful, but variation in bite performance and morphology with respect to diet has not previously been investigated. We tested whether herbivorous species have higher bite forces, larger jaw muscles and more robust jaws than carnivorous species. We measured in vivo and theoretical bite forces in 27 serrasalmid species. We compared the size of the adductor mandibulae muscle, the jaw mechanical advantages, the type of jaw occlusion, and the size and shape of the lower jaw. We also examined the association between bite performance and functional morphological traits of the oral jaw system. Contrary to our predictions, carnivorous piranhas deliver stronger bites than their herbivorous counterparts. The size of the adductor mandibulae muscle varies with bite force and muscles are larger in carnivorous species. Our study highlights an underestimated level of functional morphological diversity in a fish group of exclusive biters. We provide evidence that the trophic specialization towards carnivory in piranhas results from changes in the configuration of the adductor mandibulae muscle and the lower jaw shape, which have major effects on bite performance and bite strategy.

Morphometric models for estimating bite force in Mus and Rattus: mandible shape and size do better than lever-arm ratios

Morphological traits are frequently used as proxies for functional outputs such as bite force performance. This allows researchers to infer and interpret the impacts of functional variation, notably in adaptive terms. Despite their mechanical bases, the predictive power of these proxies for performance is not always tested. In particular, their accuracy at the intraspecific level is rarely assessed, and they have sometimes been shown to be unreliable. Here, we compare the performance of several morphological proxies in estimating in vivo bite force, across five species of murine rodents, at the interspecific and intraspecific levels. Proxies used include the size and shape of the mandible, as well as individual and combined muscular mechanical advantages (temporal, superficial masseter and deep masseter). Maximum voluntary bite force was measured in all individuals included. To test the accuracy of predictions allowed by the proxies, we combined linear regressions with a leave-one-out approach, estimating an individual bite force based on the rest of the dataset. The correlations between estimated values and the in vivo measurements were tested. At the interspecific and intraspecific levels, size and shape were better estimators than mechanical advantages. Mechanical advantage showed some predictive power at the interspecific level, but generally not within species, except for the deep masseter in Rattus. In few species, size and shape did not allow us to predict bite force. Extrapolations of performance based on mechanical advantage should therefore be used with care, and are mostly unjustified within species. In the latter case, size and shape are preferable.

Behavioral Correlates of Cranial Muscle Functional Morphology

This issue of the Anatomical Record is the first of a two-volume set that focuses on new investigations into behavioral correlates of muscle functional morphology. Much of the research on functional morphology and adaptation to specific functional niches focuses on the shapes of hard-tissues-bones and teeth. Investigations into soft-tissue anatomy tend to be predominantly descriptive with only brief allusion to ontogenetic or evolutionary origins of structures. When muscles are included in analyses of functional systems, their function tends to be oversimplified-usually considered a simple force vector connecting two osteological points, with the force treated as a constant derived from some simple calculation of muscle size. The goal of these special issues is to present a series of studies that take a more elaborate look at how muscles can be viewed from a functional perspective in studies searching for morphological correlates of behavior. This first volume focuses on the behavioral correlates of cranial muscles-starting with a paper about the mimetic musculature of primates and ending with a series of papers on the masticatory muscles of many lineages of vertebrates. The next issue of the Anatomical Record (March 2018) includes our papers on the behavioral correlates of postcranial muscles. Taken together, we hope you agree that this series presents valuable insights into these form/function relationships using both traditional approaches+ and cutting-edge techniques. Anat Rec, 301:197-201, 2018. © 2018 Wiley Periodicals, Inc.

Comparative bite force in two syntopic murids (Rodentia) suggests lack of competition for food resources

Closely related syntopic species have been shown to avoid competition by differentiating in the type of food they process. This can be achieved by changes in size or in the masticatory apparatus that produce modifications in bite force. The wood mouse (Apodemus sylvaticus (Linnaeus, 1758)) and Western Mediterranean mouse (Mus spretus Lataste, 1883) are two murid rodent species found in syntopy in the south of France. We measured bite force in wild specimens of both species to test for differences in performance. Despite its greater body mass, the wood mouse showed only slightly higher bite force than the Western Mediterranean mouse. We found no clear sexual dimorphism in either species; however, among the males of the Western Mediterranean mouse, two groups appeared in terms of bite force. This bite force difference may correspond to a hierarchical organization of these males. Overall, it seems that both species have similar bite forces and accordingly overlap in the resources they use. Other factors may exist that create a niche differentiation between the wood mouse and the Western Mediterranean mouse. Another explanation may be a great abundance of food, which would cancel competition for this resource in these species.