Unusual Antibacterial Property of Mesoporous Titania Films: Drastic Improvement by Controlling Surface Area and Crystallinity

Manufacture of antibacterial carbon fiber-reinforced plastics (CFRP) using imine-based epoxy vitrimer for medical application

An antibacterial carbon fiber-reinforced plastics (CFRP) was manufactured based on a vitrimer containing imine groups. A liquid curing agent was prepared to include an imine group in the matrix, and was synthesized without a simple mixing reaction and any purification process. The vitrimer used as the matrix for CFRP was prepared by reacting a commercial epoxy with a synthesized curing agent. The structural and thermal properties of the vitrimer were determined by Fourier transform-infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, the temperature-dependent behavior of the vitrimer was characterized by stress relaxation, reshaping, and shape memory experiments. The mechanical properties of composites fabricated using vitrimer were fully analyzed by tensile, flexural, short-beam strength, and Izod impact tests and had mechanical properties similar to reference material. Moreover, both the vitrimer and the vitrimer composites showed excellent antibacterial activity against Staphylococcus aureus and Escherichia coil due to the imine group inside the vitrimer. Therefore, vitrimer composites have potential for applications requiring antimicrobial properties, such as medical devices.

Solar light-driven CeVO4/ZnO nanoheterojunction for the mineralization of Reactive Orange 4

In this study, we synthesized CeVO₄/ZnO nanoheterojunction photocatalyst through hydrothermal-precipitation method. The prepared photocatalyst was characterized by Fourier transform infrared analysis (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) with elemental color mapping (ECM), high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) pattern, UV-vis diffuse reflection spectroscopy (UV-vis-DRS), BET, and photoluminescence (PL) spectroscopy. The BET surface area of CeVO₄/ZnO is 10.50 m²/g. The photocatalytic activity of CeVO₄/ZnO nanoheterojunction under solar light was investigated for the degradation of Reactive Orange 4 (RO 4). CeVO₄/ZnO has been found to be more effective for mineralization of RO 4 than the prepared ZnO at neutral pH. The addition of TBA (^•OH scavenger) contributes a significant decrease in the photodegradation efficiently of the catalyst. Chemical oxygen demand (COD) measurements confirmed the complete mineralization of RO 4. In addition, it found that the photocatalyst was stable and reusable. Graphical abstract.

Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents: A review

Nowadays, metal oxide nanoparticles (NPs) have been applied in various fields of nanotechnology including catalysis of chemical reactions, drug delivery, water treatment, textile industries, polymer composites, adhesives, and coatings. The greatest challenge in relation to metal oxide NPs is high tendency to aggregation. Chemical surface modification of metal oxide NPs has gained widely interest to control of dispersion and aggregation of NPs. Silane modifiers are one of the most important bifunctional modifiers that are frequently used for surface treatment of metal oxide NPs. In this review paper, we first focus on the synthesis, surface thermodynamic properties, surface modification techniques, and kinetic of silanization reaction of metal oxide NPs. Then, the recent development in using silane modifiers for treatment of metal oxide NPs in various applications were investigated. It was found that the unmodified NPs have high surface energy and are thermodynamically unstable. The thermodynamic properties of NPs including G_m^s, H_m^s, and S_m^sincrease with decreasing the particle size. Aggregation phenomena is the simple way to reduce the excess surface energy of NPs that leads to an increase in particle size. Therefore, the chemical surface modification of NPs using silane modifiers can be used as an effective method for the prevention of NPs agglomeration and improvement of NPs stability.

Enhanced osteogenesis properties of titanium implant materials by highly uniform mesoporous thin films of hydroxyapatite and titania intermediate layer

Titanium (Ti) has been widely used for medical and dental applications; however, bare Ti cannot be properly connected to a living bone, and hence some modifications are needed for this purpose. The present study describes the synthesis of mesoporous hydroxyapatite thin films (MHF) on titanium implant materials for speeding up and shortening the processes of osteointegration. The uniform MHF was coated on a Ti substrate following the insertion of intermediate titania (TiO₂) film via the sol-gel dip-coating method. The intermediate titania layer improved the bonding strength between the MHF and Ti substrate. MHFs were synthesized using a precursor solution containing phosphoric acid, calcium nitrate tetrahydrate, and a nonionic surfactant (C₁₂E₁₀) as the phosphate source, calcium source, and structure-directing agent, respectively. The effect of calcination temperature on phase composition, morphology, microstructure, roughness, and wettability of the MHFs was investigated using XRD, FE-SEM, COM, AFM, and contact angle measurement. The XRD results revealed the crystalline hydroxyapatite phase, which was improved with an increase in the calcination temperature. Moreover, the FE-SEM images showed the crack-free MHFs, uniform thickness of the layer, and mesoporous surface morphology. In addition, it was found that the roughness and wettability of the samples change upon the alteration of calcination temperature. The biological studies demonstrated that MHFs support the adhesion and proliferation of the mesenchymal stem cells (MSCs) and guid them toward osteogenic differentiation. Therefore, the MHFs prepared in this study may be useful in a wide range of applications, particularly in bone regeneration medicine.

Liquid-Phase Synthesis of Iron Oxide Nanostructured Materials and Their Applications

Owing to their high natural abundance, low cost, easy availability, and excellent magnetic properties, considerable interest has been devoted to the synthesis and applications of iron oxide nanostructured materials. Liquid-phase synthesis methods are economical and environmentally friendly with low energy consumption and volatile emissions, and as such have received much attention for the preparation of iron oxide nanostructured materials. Herein, the liquid-phase synthesis methods of iron oxide nanostructured materials including the co-precipitation method, microemulsion method, conventional hydrothermal and solvothermal methods, microwave-assisted heating method, sonolysis method, and other methods are summarized and reviewed. Many iron oxide nanostructured materials, self-assembled nanostructures, and nanocomposites have been successfully prepared, which are of great significance to enhance their structure-dependent properties and applications. The specific roles of liquid-phase chemical reaction parameters in regulating the chemical composition, structure, crystallinity, morphology, particle size, and dispersive behavior of the as-prepared iron oxide nanostructured materials are emphasized. The biomedical, environmental, and electrochemical energy storage applications of iron oxide nanostructured materials are discussed. Finally, challenges and perspectives are proposed for future investigations on the liquid-phase synthesis and applications of iron oxide nanostructured materials.

Charge-switchable magnetic separation and characterization of food additive titanium dioxide nanoparticles from commercial food

Growing concerns about the potential health effects of nanoscale titanium dioxide (TiO₂) have necessitated the need for monitoring the size distribution and physicochemical properties of food additive TiO₂ that are present in commercial food. Acid digestion is by far the most widely used method to remove interfering food matrices, but the highly corrosive nature of the reaction could alter the physicochemical properties of the TiO₂, which may give a skewed information about the materials. Here, we report an effective approach to extract intact form of food additive TiO₂ nanoparticles from processed food through charge-charge interaction between TiO₂ particles and charge-switchable starch magnetic beads (PL@SMBs), of which the captured TiO₂ is readily harvested by switching the surface charge of PL@SMBs to neutral. The size and surface property of extracted TiO₂ were shown to be well maintained due to the mild nature of the reaction. The extracted TiO₂ particles from 10 commercial processed food showed a size distribution from 40 to 250 nm with a mean diameter of 115 nm, of which 22 % of them were less than 100 nm. The extracted TiO₂ did not exhibit short-term cytotoxicity, but induced cellular oxidative stress at high concentration.

Fabrication of a Double-Shell Ag/AgCl/G-ZnFe2O4 Nanocube with Enhanced Light Absorption and Superior Photocatalytic Antibacterial Activity

Development of highly efficient photocatalysts is a primary goal in the photocatalysis domain among which reusable composites with a synergistic photocatalytic effect have attracted extensive interest. The ability of catalysts to capture light determines their photocatalytic effect, and porous or hollow photocatalysts are more conducive to the entry and reflection of light. The goal of this research is to develop a type of visible-light-driven, double-shell photocatalyst with high antibacterial activity and excellent cycling stability. Photocatalysts were fabricated using hollow graphitized ZnFe₂O₄ nanospheres (G-ZnFe₂O₄) as the carrier. After G-ZnFe₂O₄ was functionalized with a polydopamine (PDA) template layer, Ag nanoparticles (NPs) and cubic AgCl NPs were in situ generated on the surface of the PDA/G-ZnFe₂O₄ nanospheres successively. Then, the PDA template was removed using KOH solution, and double-shell Ag/AgCl/G-ZnFe₂O₄ nanocubes (referred to as DAGZNs) with excellent photocatalytic antibacterial activity were constructed. The DAGZNs showed excellent antibacterial properties against Staphylococcus aureus and Escherichia coli. The efficient synergistic photocatalytic antibacterial activity coupled with magnetic separability and recyclability of DAGZNs make them potential for practical application in water purification and environmental protection. The method of designing and synthesizing double-shell structures to enhance photocatalysis may also be extended to synthesis of other photocatalytic and optical materials.

1,3,5-Triethynylbenzene and melamine as monomers to synthesize three-dimensional network porous aromatic frameworks based silica/florisil for determination of carbendazim and thiabendazole in spinach

In this study, the new and efficient three-dimensional network porous aromatic frameworks materials called Silica-PAFs-a, Florisil-PAFs-a, Silica-PAFs-b, and Florisil-PAFs-b were first synthesized. The properties of materials were analyzed by five characterization methods. The materials were used as adsorbents in pipette-tip solid-phase extraction for the effective determination of carbendazim and thiabendazole in spinach sample. Meanwhile, the obtained materials were tested by static adsorption and dynamic adsorption. The result showed that the specific surface area of materials greatly increased after introducing three-dimensional network porous aromatic frameworks. Microstructural modification exposed a large number of amino reactive groups that made them have a better adsorption amount for the two targets. The calibration graphs of carbendazim and thiabendazole in methanol were linear over 0.10-300.0 µg/mL, and the limits of detection and quantification were 0.00546 and 0.0182 µg/mL, and 0.00741 and 0.0247µg/mL respectively. A reliable analytical method was developed for recognition targets in spinach sample by Silica-PAFs-b with satisfactory extraction recoveries (96.25 and 100.51%). The proposed method using the material was applied for trace analysis of the carbendazim and thiabendazole residue.

Synthesis of Podlike Magnetic Mesoporous Silica Nanochains for Use as Enzyme Support and Nanostirrer in Biocatalysis

Magnetic mesoporous materials have attracted great interest due to their combined property of magnetic nanomaterials and mesoporous materials as well as their potential applications in catalysis, bioenrichment, drug delivery, nanoreactors, etc. In this study, one-dimensional (1D) podlike magnetic mesoporous silica nanochains with tunable hollow space (Fe₃O₄@nSiO₂@void@mSiO₂ nanochain named as podlike 1D magnetic mesoporous silica (PL-MMS) nanochain) are rationally synthesized for the first time through a controlled magnetic-induced interface coassembly approach. The obtained PL-MMS possesses a tunable diameter (300-500 nm), large and perpendicular mesopores (8.2 nm) in the outer shell, a silica-protected magnetic-responsive core, and a high surface area (325 m²/g). Benefiting from the large voids and unique mesopores, these mesoporous nanochains exhibit superior performance in enzyme (lipase with a size of 4.0 nm) immobilization with a high loading capacity of 223 μg/mg, and the immobilized lipase demonstrates enhanced catalytic activity in different pH values and temperatures as well as excellent tolerance of organic solvent.

Enhanced efficacy of propranolol therapy for infantile hemangiomas based on a mesoporous silica nanoplatform through mediating autophagy dysfunction

Infantile hemangioma is one of the most common vascular tumors, which might result in morbidity and mortality without timely intervention. Propranolol is currently the first-line therapy for hemangiomas, but its potential side effects and high frequency of administration make it urgent to develop a suitable drug delivery system for propranolol. In the present study, we formulated a propranolol delivery system based on mesoporous silica nanoparticles (PRN@MSN) and investigated the interplay between autophagic activities mediated by nanoparticles and improved therapeutic efficacy of PRN@MSN. The results showed that PRN@MSN nanoparticles exhibited higher cytotoxicity compared with free propranolol in vitro and in vivo, which could induce excessive autophagosome accumulation through increased autophagosome formation and impaired autophagic degradation. Inhibition of autophagy in the early stage could attenuate the cytotoxicity of PRN@MSN. ROS generation was essential for nanoparticle-mediated autophagy and cytotoxicity, and PRN@MSN-induced autophagy dysfunction could enhance endoplasmic reticulum (ER) stress in hemangioma stem cells. Our study revealed a promising PRN delivery system based on a mesoporous silica nanoplatform that could induce autophagy dysfunction with excessive autophagosome accumulation to promote the therapeutic efficacy of PRN therapy. PRN@MSN drug delivery system combined with autophagy modulation may act as a promising treatment pattern in the treatment of hemangiomas.

A Universal Lab-on-Salt-Particle Approach to 2D Single-Layer Ordered Mesoporous Materials

The advantages of existing ordered mesoporous materials have not yet been fully realized, due to their limited accessibility of in-pore surface and long mass-diffusion length. A general, controllable, and scalable synthesis of a family of two-dimensional (2D) single-layer ordered mesoporous materials (SOMMs) with completely exposed mesopore channels, significantly improved mass diffusion, and diverse framework composition is reported here. The SOMMs are synthesized via a surface-limited cooperative assembly (SLCA) on water-removable substrates of inorganic salts (e.g., NaCl), combined with vacuum filtration. As a proof of concept, the obtained CeO₂ -based SOMMs show superior catalytic performance in CO oxidation with high conversion efficiency, ≈33 times higher than that of conventional bulk mesoporous CeO₂ . This SLCA is a promising approach for developing next-generation porous materials for various applications.

Cartilage matrix-inspired biomimetic superlubricated nanospheres for treatment of osteoarthritis

The superlubrication of natural joint has been attributed to hydration lubrication of articular cartilage. Here, inspired by the structure of phosphatidylcholine lipid (a typical cartilage matrix) with the presence of zwitterionic charges, we developed superlubricated nanospheres, namely poly (2-methacryloyloxyethyl phosphorylcholine)-grafted mesoporous silica nanospheres (MSNs-NH2@PMPC), via photopolymerization. The biomimetic nanospheres could enhance lubrication due to the formation of a tenacious hydration layer surrounding the zwitterionic charges of polymer brushes (PMPC), and achieve local delivery of an anti-inflammatory drug employing the nanocarriers (MSNs). The tribological and drug release tests showed improved lubrication and sustained drug release of the nanospheres. Additionally, the in vitro and in vivo tests revealed that the superlubricated drug-loaded nanospheres inhibited the development of osteoarthritis by up-regulating cartilage anabolic components and down-regulating catabolic proteases and pain-related gene. The nanospheres, with an integrated feature of both enhanced lubrication and sustained drug delivery, can be an efficient intra-articular nanomedicine for the treatment of osteoarthritis.

Controllable Synthesis of Inverse Opal TiO2-x Photonic Crystals and Their Photoelectric Properties

In this study, inverse opal TiO_2-x photonic crystals (IO-TiO_2-x ) have been successfully synthesized by a two-step calcination. The whole synthesis is safe and feasible. Additionly, the reduction degree and the structure of IO-TiO_2-x can be precisely controlled. A series of IO-TiO_2-x samples with different reduction degree were prepared and characterized. The TEM images show that the obtained samples possess a 3D-ordered macroporous inverse opal structure. The reduced Ti atoms/oxygen vacancies were confirmed by Raman and XPS spectroscopy. All IO-TiO_2-x samples showed better photoelectric properties than those of common TiO₂ which indicates their great potential to be applied to photoelectric fields. The improvement of photoelectric properties is attributed to the efficient electron-hole separation efficiency induced by moderately reduced Ti atoms/oxygen vacancies. Meanwhile, the 3D-ordered macroporous inverse opal structure and the band gap are regulated to "capture" more solar energy. This new approach is proven to be a meaningful method to synthesize high-performance TiO₂ materials.

Degradation of Methylene Blue Dye in the Presence of Visible Light Using SiO₂@α-Fe₂O₃ Nanocomposites Deposited on SnS₂ Flowers

Semiconductor materials have been shown to have good photocatalytic behavior and can be utilized for the photodegradation of organic pollutants. In this work, three-dimensional flower-like SnS₂ (tin sulfide) was synthesized by a facile hydrothermal method. Core-shell structured SiO₂@α-Fe₂O₃ nanocomposites were then deposited on the top of the SnS₂ flowers. The as-synthesized nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–Vis Spectroscopy, Brunauer–Emmett–Teller (BET) surface area analysis, and photoluminescence (PL) spectroscopy. The photocatalytic behavior of the SnS₂-SiO₂@α-Fe₂O₃ nanocomposites was investigated by observing the degradation of methylene blue (MB). The results show an effective enhancement of photocatalytic activity for the degradation of MB especially for the 15 wt % SiO₂@α-Fe₂O₃ nanocomposites on SnS₂ flowers.

Gold Nanoparticles Supported on Mesoporous Titania Thin Films with High Loading as a CO Oxidation Catalyst

In the present work, 2.4 nm gold nanoparticles (Au NPs) are uniformly dispersed on mesoporous titania thin films which are structurally tuned by controlling the calcination temperature. The gold content of the catalyst is as high as 27.8 wt %. To our knowledge, such a high loading of Au NPs with good dispersity has not been reported until now. Furthermore, the reaction rate of the gold particles is enhanced by one order of magnitude when supported on mesoporous titania compared to non-porous titania. This significant improvement can be explained by an increase in the diffusivity of the substrate due to the presence of mesopores, the resistance to agglomeration, and improved oxygen activation.

Chemically modified amino porphyrin/TiO2 for the degradation of Acid Black 1 under day light illumination

In this paper, for the first time, chemically modified 5,10,15,20-meso-tetra-(para-amino)-phenyl-porphyrin/TiO₂ (TPAPP/TiO₂) was prepared and used for the degradation of an azo dye Acid Black 1 (AB 1) under direct sunlight. Initially, TiO₂ was prepared by sol-gel method. Before making a TPAPP/TiO₂ composite, the surface modification of TiO₂ was carried out with glycidoxypropyltrimethoxy silane (GPTMS) which acts as a coupling agent. This is an epoxy terminated silane and could easily bond to the amino group of TPAPP through epoxy cleavage. The formation of TPAPP/TiO₂ was confirmed by different characterization techniques such as FT-IR, XRD, SEM and DRS. The photocatalytic activity of TiO₂ was highly influenced by TPAPP. A mechanism was proposed for AB 1 degradation by TPAPP/TiO₂ under sun light.

Choline chloride–zinc chloride ionic liquid as a green template for the sol–gel synthesis of mesoporous titania

Choline chloride–zinc chloride ionic liquid has been used as a green template to synthesis highly crystalline mesoporou anatase titania.

Facet-controlled anatase TiO2 nanoparticles through various fluorine sources for superior photocatalytic activity

Reactive surface-exposed anatase TiO2 (a-TiO2) is highly desirable for applications requiring superior photocatalytic activity. In order to obtain a favorable surface, morphology control of the a-TiO2 using capping agents has been widely investigated. Herein, we systematically study the effects of different F sources (HF, TiF4, and NH4F) as the capping agent on the morphology control and photocatalytic activities of a-TiO2 in a hydrothermal process. When either HF or TiF4 was added, large truncated bipyramids formed with the photocatalytically active {001} facet, whereas the NH4F was not effective for facet control, yielding nanospheres similar to the pure a-TiO2. The morphology changes were related to the decomposition behaviors of the F sources in the solvent material: HF and TiF4 decomposed and supplied F(-) ions before a-TiO2 nucleation, which changed the nucleation rate and growth direction, leading to the resultant a-TiO2 morphology. On the other hand, NH4F supplied F(-) ions after a-TiO2 nucleation and could not change the growth behavior. In terms of the photocatalytic effect, the HF- and TiF4-treated a-TiO2 effectively decomposed ∼90% and ∼80% of methylene blue, respectively, in 1 h, while ∼60% was decomposed for the NH4F-treated a-TiO2. Note that pure a-TiO2 photocatalytically decomposed only ∼10% of methylene blue over the same time. These results pave the way to precise control of the facet of TiO2 through using different capping agents.

Antimicrobial performance of mesoporous titania thin films: role of pore size, hydrophobicity, and antibiotic release

Implant-associated infections are undesirable complications that might arise after implant surgery. If the infection is not prevented, it can lead to tremendous cost, trauma, and even life threatening conditions for the patient. Development of an implant coating loaded with antimicrobial substances would be an effective way to improve the success rate of implants. In this study, the in vitro efficacy of mesoporous titania thin films used as a novel antimicrobial release coating was evaluated. Mesoporous titania thin films with pore diameters of 4, 6, and 7 nm were synthesized using the evaporation-induced self-assembly method. The films were characterized and loaded with antimicrobial agents, including vancomycin, gentamicin, and daptomycin. Staphylococcus aureus and Pseudomonas aeruginosa were used to evaluate their effectiveness toward inhibiting bacterial colonization. Drug loading and delivery were studied using a quartz crystal microbalance with dissipation monitoring, which showed successful loading and release of the antibiotics from the surfaces. Results from counting bacterial colony-forming units showed reduced bacterial adhesion on the drug-loaded films. Interestingly, the presence of the pores alone had a desired effect on bacterial colonization, which can be attributed to the documented nanotopographical effect. In summary, this study provides significant promise for the use of mesoporous titania thin films for reducing implant infections.

Morphological Transformation Reactions of Photocatalytic Metalloporphyrin-Containing Coordination Polymer Particles from Seed Structures

Coordination polymer particles have attracted a great deal of attention due to their characteristic properties and diverse applications in the fields of gas storage, catalysis, optics, sensing, electronics, photochemistry, and biology. Herein, we investigated shape transformation reactions of zinc 5, 10, 15, 20-tetra(4-pyridyl)-21 H, 23 H-porphine (ZnTPyP)-containing coordination polymer particles (ZnTPyP-CPPs) from seed structures by delicately controlling the Gibbs energy of the self-assembly system. We obtained a morphological transformation from 1 D short nanorods to 1 D long nanorods and 3 D nano-octahedral structures, and from 3 D nano-octahedral structures to 1 D nanorod structures. We illustrated a new method to design and synthesize metalloporphyrin-containing CPPs in a controllable manner. Furthermore, photocatalytic properties of ZnTPyP-CPPs were tested, showing good catalytic abilities towards the photodegradation of methylene blue (MB) under visible light illumination.

Facile fabrication of various zinc-nickel citrate microspheres and their transformation to ZnO-NiO hybrid microspheres with excellent lithium storage properties

Zinc-nickel citrate microspheres are prepared by a simple aging process of zinc citrate solid microspheres in nickel nitrate solution. As the concentration of nickel nitrate solution increases, the morphology of the produced zinc-nickel citrate evolves from solid, yolk-shell to hollow microspheres. The formation mechanism of different zinc-nickel citrate microspheres is discussed. After annealing treatment of the corresponding zinc-nickel citrate microspheres in air, three different ZnO-NiO hybrid architectures including solid, yolk-shell and hollow microspheres can be successfully fabricated. When applied as the anode materials for lithium ion batteries, ZnO-NiO hybrid yolk-shell microspheres demonstrate the best electrochemical properties than solid and hollow counterparts. After 200th cycles, ZnO-NiO hybrid yolk-shell microspheres deliver a high reversible capacity of 1176 mA h g⁻¹. The unique yolk-shell configuration, the synergetic effect between ZnO and NiO and the catalytic effect of metal Ni generated by the reduction of NiO during discharging process are responsible for the excellent lithium storage properties of ZnO-NiO hybrid yolk-shell microspheres.

Vanadia supported on nickel manganese oxide nanocatalysts for the catalytic oxidation of aromatic alcohols

Vanadia nanoparticles supported on nickel manganese mixed oxides were synthesized by co-precipitation method. The catalytic properties of these materials were investigated for the oxidation of benzyl alcohol using molecular oxygen as oxidant. It was observed that the calcination temperature and the size of particles play an important role in the catalytic process. The catalyst was evaluated for its oxidation property against aliphatic and aromatic alcohols, which was found to display selectivity towards aromatic alcohols. The samples were characterized by employing scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller analysis, thermogravimetric analysis, and X-ray photoelectron spectroscopy.

HF-free synthesis of anatase TiO2 nanosheets with largely exposed and clean {001} facets and their enhanced rate performance as anodes of lithium-ion battery

An interface between toluene and water was utilized to synthesize ca. 10 nm thick of anatase TiO2 nanosheets (NSs) with 82% exposure of {001} facets. In this procedure, highly corrosive and toxic HF, which was generally used to prepare TiO2 NSs with largely exposed high energy facets, was avoided. Furthermore, the surfaces of the NSs were quite clean as suggested by XPS analysis. Serving as anode materials in lithium-ion batteries, these as-prepared anatase TiO2 NSs manifested a low initial irreversible capacity loss (12.5% at 1 C), an excellent capacity retention at 10 C charge-discharge rate (101.9 mA h g(-1) after 100 cycles), and enhanced rate performance at 0.5-10 C current rates in compared with Degussa P25 TiO2 nanoparticles (NPs). Their excellent electrochemical performances were mainly derived from the large proportion of {001} exposed facets and a very short diffusion pathway, which allowed fast and efficient Li(+) transportation in the electrodes.

Chemical preparation of ferroelectric mesoporous barium titanate thin films: drastic enhancement of Curie temperature induced by mesopore-derived strain

Mesoporous barium titanate (BT) thin films are synthesized by a surfactant-assisted sol-gel method. The obtained mesoporous BT thin films show enhanced ferroelectricity due to the effective strains induced by mesopores. The Curie temperature (T(c)) of the mesoporous BT reaches approximately 470 °C.

Photoactive rolled-up TiO2 microtubes: fabrication, characterization and applications†Electronic supplementary information (ESI) available. See DOI: 10.1039/c4tc00796dClick here for additional data file

Because of its unique properties, titania (TiO2) represents a promising candidate in a wide variety of research fields. In this paper, some of the properties and potential applications of titania within rolled-up nanotechnology are explored. It is shown how the structural and optical properties of rolled titania microtubes can be controlled by properly tuning the microfabrication parameters. The rolling up of titania films on different sacrificial layers and containing different shapes, achieving a control on the diameter of the fabricated titania microtubes, is presented. In order to obtain the more photoactive crystalline form of titania, one during-fabrication and two post-fabrication methods are demonstrated. Interesting applications in the fields of photocatalysis and photonics are suggested: the use of titania rolled-up microtubes as micromotors and optical microresonators is presented.