Nanoscale zero-valent iron particles supported on reduced graphene oxides by using a plasma technique and their application for removal of heavy-metal ions

Graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) for antimony removal: The role of active oxygen species and reaction mechanism

Sulfidated nano zero-valent iron (S-nZVI) was used to remove various pollutants from wastewater. However, the instability, poor dispersibility, and low electron transfer efficiency of S-nZVI limit its application. Herein, graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) was successfully synthesized using graphene oxide (GO) as a carrier. The properties of S-nZVI@GO were characterized by scanning electron microscopy coupled to X-ray photoelectron spectroscopy (SEM-EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) concerning the surface morphology, crystalline structure, and elemental components. S-nZVI@GO displayed an excellent capacity for antimony (Sb) removal under aerobic conditions (96.7%), with a high adsorption capacity (Q_max = 311.75 mg/g). It maintained a high removal rate (over 90%) during a wide pH range (3-9). More importantly, S-nZVI@GO activated the molecular oxygen in water via a single-electron pathway to produce •O₂－ and H₂O₂, and then oxidized trivalent antimony (Sb(III)) to pentavalent antimony (Sb(V)) and further separated it by synergistic adsorption and co-precipitation. Therefore, S-nZVI@GO shows excellent potential for Sb contamination remediation.

Jute Fibers Synergy with nZVI/GO: Superficial Properties Enhancement for Arsenic Removal in Water with Possible Application in Dynamic Flow Filtration Systems

Groundwater is one of the primary sources of water for both drinking and industrial use in northeastern Mexican territory, around 46% of the total, due to the lack of precipitation during the year and solar radiation index. The presence of arsenic in brackish soil and groundwater is a severe health issue, specifically in semi-arid and arid regions in the north of Mexico. Additionally, it represents the only source of drinking water in communities far from big cities, mainly due to the absence of hydric infrastructure. This work presents a new approach to treating polluted water with arsenic. The system based on activating jute fiber with nanoparticles of zero-valent iron immobilized over graphene oxide will allow nZVI particles to preserve their unique qualities for water sanitization. A dynamic flow test was designed to determine the effectivity of activated jute fibers as a water sanitation system. The results showed a reduction in the total arsenic content from 350 ppb to 34 ppb with a filtrate flow of 20 mL/min. The above represents 90% adsorption by the activated fiber. The analyzed sample corresponds to contaminated groundwater taken from Coahuila, Mexico. This sanitation system could be applied to low-income populations lacking robust infrastructure, such arsenic treatment plants.

Cr(VI) immobilization in soil using lignin hydrogel supported nZVI: Immobilization mechanisms and long-term simulation

A novel nanocomposite, named as nZVI@LH, was prepared by nanoscale zero-valent iron (nZVI) supported on lignin hydrogel and was used in the remediation of Cr(VI)-contaminated soil collected from an industrial site. Meanwhile, scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and X-ray diffractometry (XRD) results determined that nZVI nanoparticles disperse uniformly on hydrogel. After the 14 days remediation, the immobilization efficiency of Cr(VI) could reach over 87% in the treatment of 3% (w/w%) nZVI@LH and 26% in the treatment of bare-nZVI. Leaching experiment results showed that the treatment group with 3% (w/w%) nZVI@LH was up to the national leaching toxicity identification standard, and there was no threat in simulation of acid rain over the long term. The water-soluble (WS) fraction in 3^# nZVI@LH treatment decreased 31.1%, while the Fe-Mn oxide bound (OX) fraction and organic matter-bound (OM) fraction increased 10.9% and 13.4%, respectively. Moreover, nZVI@LH had limited impact on soil properties and the capability to immobilize Cr over a long period exposure to acid rain. This work prove that nZVI@LH has the potential to remediate Cr contaminated soil. Furthermore, details of possible mechanistic insight into the Cr remediation were carefully discussed.

Sulfidized Nanoscale Zerovalent Iron Supported by Oyster Powder for Efficient Removal of Cr (VI): Characterization, Performance, and Mechanisms

In this study, sulfidized nanoscale zerovalent iron (S-nZVI) supported by oyster shell (OS) powder (S-nZVI@OS) was synthesized by controlling the initial S/Fe ratios (0.1–0.5) to explore the potential synergistic effects during the adsorption and reduction of Cr (VI). X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analyses showed that Fe (0) and FeS were well dispersed on the OS surface. Furthermore, the stability of S-nZVI@OS composite was higher than that of nZVI, which was proved by the material ageing experiment. The effects of different S/Fe molar ratios, time, temperature, the initial concentration of Cr (VI), and initial pH on the removal efficiency were also studied. The results indicated that with the increase of the S/Fe molar ratio, the removal capacity of Cr (VI) first increased rapidly and then decreased slowly. Batch experiments showed that an optimal S/Fe molar ratio of 0.2 offered a Cr (VI) removal capacity of about 164.7 mg/g at pH 3.5. The introduction of S can not only promote Cr (VI) reduction but also combine with Cr (III) by forming precipitate on S-nZVI@OS mainly as Cr_xFe_(1−x) OOH and Cr₂S₃. The adsorption thermodynamics and kinetics demonstrated that the Langmuir model and pseudo-second-order kinetics model can describe the adsorption isotherms and kinetics. These results suggest that S-nZVI@OS is an effective and safe material for removing Cr (VI) from aqueous solutions.

Ni-Fe/Reduced Graphene Oxide Nanocomposites for Hexavalent Chromium Reduction in an Aqueous Environment

We designed and synthesized a novel high efficiency Cr(VI) removal material using reduced graphene oxide (RGO) as a support with high specific surface area and a mixture of Fe and Ni nanoparticles (NPs) as a catalytic reducing agent. Such a design enables the composite particle to be integrated with three functions of adsorption, catalysis, and reduction, where RGO could enhance Cr(VI) adsorption, while Fe/Ni NPs increase the catalytic reducing efficiency. The application of a microchip mixer guaranteed a better mixing of GO and subsequent decoration of Fe and Ni NPs on RGO. Cr(VI) removal experiments with various materials are performed, and the results demonstrated that the Ni-Fe/RGO achieved an adsorption capacity of 150.45 mg/g at pH = 7 and 197.43 mg/g at pH = 5 for Cr(VI), which is higher than those of other reported materials at a pH of ∼7. To the best of our knowledge, this is the first example of Ni-Fe/RGO for efficient Cr(VI) removal by using the synergistic effects of increased adsorption, catalysis-assisted reduction, and enhanced mixing effect of a microchip mixer. This work also provides us with a simple and low-cost method for the fabrication of an effective Cr(VI) removal material.

A review of the new multifunctional nano zero-valent iron composites for wastewater treatment: Emergence, preparation, optimization and mechanism

Nano zero-valent iron (NZVI) with high chemical reactivity and environmental friendliness had recently become one of the most efficient technologies for wastewater restoration. However, the unitary NZVI system had not met practical requirements for wastewater treatments. Expectantly, the development of NZVI would prefer multifunctional NZVI-based composites, which could be prepared and optimized by the combined methods and technologies. Consequently, a systematic and comprehensive summary from the perspective of multifunctional NZVI-composite had been conducted. The results demonstrated that the advantages of various systems were integrated by multifunctional NZVI-composite systems with a more significant performance of pollutant removal than those of the bare NZVI and its composites. Simultaneously, characteristics of the product prepared by the incorporation of numerous methods were superior to those by a simple method, resulting in the increase of the entirety efficiency. By comparison with other preparation methods, the ball milling method with higher production and field application potential was worthy of attention. After combining multiple technologies, the effect of NZVI and its composite systems could be dramatically strengthened. Preparation technology parameters and treatment effect of contaminants could be further optimized using more comprehensive experimental designs and mathematical models. The mechanism of the multifunctional NZVI system for contaminants treatment was primarily focused on adsorption, oxidation, reduction and co-precipitation. Multiple techniques were combined to enhance the dispersion, alleviating passivation, accelerating electron transfer efficiency or mass transfer action for optimizing the effect of NZVI composites.

"In-situ synthesized" iron-based bimetal promotes efficient removal of Cr(VI) in by zero-valent iron-loaded hydroxyapatite

Anionic Cr(VI) and cationic heavy metals generally co-exist in industrial effluents and threaten the public health. Zero-valent iron (ZVI) particles tent to passivate rapidly, which results in a gradual drop in its reactivity. In this work, a strategy of "in-situ synthesized" iron-based bimetal was first developed to stimulate the self-activation of passivated ZVI. During this process, ZVI-loaded hydroxyapatite (ZVI/HAP) was prepared to enhance the affinity for co-existing Cu²⁺, which promoted the in-situ Cu⁰ deposition on ZVI/HAP to form a Fe-Cu bimetal. The deposited Cu⁰ significantly decreased the activation energy (E_a) of Cr(VI) reduction by 24.9%, and its corresponding Cr(VI) removal (96.53%) was much higher that of single Cr(VI) system (68.67%) within 9 h. More importantly, the removal of Cr(VI) and Cu²⁺ were synchronously achieved. Systematical electrochemical characterizations were first introduced to explore the galvanic behaviors of iron-based bimetal. The charge transfer resistance and the negative open circuit potential of ZVI/HAP significantly decreased with the Cu⁰ deposition, thereby accelerating the electron transfer from Fe⁰ to Cu²⁺. The enhanced electron transfer further facilitated the Fe(II) release to promote Cr(VI) reduction. This "in-situ synthesized" iron-based bimetal strategy provides a novel pattern for ZVI activation and exhibits practical application in remediation of combined contaminant.

Nano zero valent iron encapsulated in graphene oxide for reducing uranium

Nano zero-valent iron (Fe⁰) has been widely used to remove Uranium (U(VI)). In order to enhance the performance of Fe⁰ toward U(VI) removal, the Fe⁰ was assembled into graphene oxide (GO) sheets via 3-aminopropyl triethoxysilane (APTES) as Fe⁰/APTES-GO composites. The Fe⁰/APTES-GO composites were triumphantly prepared, characterized and analyzed by means of Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) together with Energy Dispersive Spectrometer (EDS), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). SEM and TEM-EDS results manifested that Fe⁰ particles were encapsulated into rolled-up GO, which greatly improved the stability of Fe⁰. Batch experiment showed that only a small amount of Fe²⁺ was leached in the first two leaching cycles of Fe⁰/APTES-GO composites. The removal capacity of Fe⁰/APTES-GO composites was up to 1357.99 mg/g at pH = 4.1 and T = 50 °C, which was mainly attributed to the reducing activity of Fe⁰ and an abundance of functional groups (i.e., -COOH, C-OH and -OH) on the Fe⁰/APTES-GO composites. The electrostatic potential (ESP) from the calculation also supported that U(VI) tended to be reduced at the back side of the GO-Fe⁰ cluster.

Cation-π induced surface cleavage of organic pollutants with ⋅OH formation from H2O for water treatment

High energy consumption is impedimental for eliminating refractory organic pollutants in water by applying advanced oxidation processes (AOPs). Herein, we develop a novel process for destructing these organics in chemical conjuncted Fe0-FeyCz/Fex, graphited ZIF-8, and rGO air-saturated aqueous suspension without additional energy. In this process, a strong Fe-π interaction occurs on the composite surface, causing the surface potential energy ∼310.97 to 663.96 kJ/mol. The electrons for the adsorbed group of pollutants are found to delocalize to around the iron species and could be trapped by O2 in aqueous suspension, producing ⋅OH, H, and adsorbed organic cation radicals, which are hydrolyzed or hydrogenated to intermediate. The target pollutants undergo surface cleavage and convert H2O to ⋅OH, consuming chemical adsorption energy (∼2.852-9.793 kJ/mol), much lower than that of AOPs. Our findings provide a novel technology for water purification and bring new insights into pollutant oxidation chemistry.

Current Trends in the Application of Nanomaterials for the Removal of Pollutants from Industrial Wastewater Treatment-A Review

In the recent decades, development of new and innovative technology resulted in a very high amount of effluents. Industrial wastewaters originating from various industries contribute as a major source of water pollution. The pollutants in the wastewater include organic and inorganic pollutants, heavy metals, and non-disintegrating materials. This pollutant poses a severe threat to the environment. Therefore, novel and innovative methods and technologies need to adapt for their removal. Recent years saw nanomaterials as a potential candidate for pollutants removal. Nowadays, a range of cost-effective nanomaterials are available with unique properties. In this context, nano-absorbents are excellent materials. Heavy metal contamination is widespread in underground and surface waters. Recently, various studies focused on the removal of heavy metals. The presented review article here focused on removal of contaminants originated from industrial wastewater utilizing nanomaterials.

Removal of heavy metals and radionuclides from water using nanomaterials: current scenario and future prospects

There is an increase in concern about the hazardous effects of radioactivity due to the presence of undesirable radioactive substances in our vicinity. Nuclear accidents such as Chernobyl (1986) and Fukushima (2011) have further raised concerns towards such incidents which have led to contamination of water bodies. Conventional methods of water purification are less efficient in decontamination of radioisotopes. They are usually neither cost-effective nor environmentally friendly. However, nanotechnology can play a vital role in providing practical solutions to this problem. Nano-engineered materials like metal oxides, metallic organic frameworks, and nanoparticle-impregnated membranes have proven to be highly efficient in treating contaminated water. Their unique characteristics such as high adsorption capacity, large specific surface area, high tensile strength, and excellent biocompatibility properties make them useful in the field of water purification. This review explores the present status and future prospects of nanomaterials as the next-generation water purification systems that can play an important role in the removal of heavy metals and radioactive contaminants from aqueous solutions.

Environmental Remediation with Functional Aerogels and Xerogels

Several different types of aerogels and xerogels are demonstrated as effective sorbents for the capture and/or immobilization of radionuclides and other contaminants in gaseous form [e.g., Hg(g), I2(g), Xe, Kr] as well as ionic form (e.g., Cd2+, Ce4+, Cs+, Cu2+, Fe2+, Hg2+, I-, IO3 -, Kr, Pb2+, Rb+, Sr2+, 99Tc7+, U6+, Zn2+). These sorbents have unique properties, which include high specific surface areas, high pore volumes, a range of pore sizes, and functionalities that provide methods for binding radionuclides and other contaminants, generally through physisorption, chemisorption, or a combination thereof. This combination of properties and functionalities makes these types of materials ideal for use as sorbents for capturing radionuclides. The primary base materials that will be discussed in this paper include Ag0-functionalized silica aerogels, Ag+-impregnated aluminosilicate aerogels, Ag0-functionalized aluminosilicate aerogels, metal-impregnated (non-Ag) aluminosilicate aerogels and xerogels, sulfide-based aerogels, and carbon-based aerogel composites. For the capture of I2(g), the materials reported herein show some of the highest iodine loadings ever reported for inorganic sorbents. For the capture of ionic species, these materials also show promise as next-generation materials for active radionuclide remediation. This progress report describes materials fabrication, general properties, and environmental remediation applications.

Adsorption of cadmium using modified zeolite-supported nanoscale zero-valent iron composites as a reactive material for PRBs

The main challenge in utilizing permeable reactive barriers (PRB) for remediation of metals-contaminated groundwater is determination of a proper low-cost reactive medium that can remove the desired contaminants simultaneously. In this study, the performance of different zeolite materials and nZVI-based adsorbents for cadmium (Cd) removal was compared. Further, a composite of the best nZVI and zeolite samples was synthesized with the removal efficiency of 20.6 g/kg and selected as the proposed adsorbent. Moreover, the characteristics of the composite were analyzed through different techniques (BET, XRF, XRD, FT-IR, FE-SEM and EDX). In addition, through kinetic and thermodynamic studies, the effect of temperature, pH, ionic strength and presence of other metal ions on Cd removal efficiency was investigated. According to the results, since sodium zeolite (NaZ) provides a large number of specific ion-exchange sites for decoration with nZVI, stabilizes nZVI, and prevents its aggregation and further leaching in the harsh environment, the NaZ-nZVI composite is capable of removing Cd by adsorption and is applicable in PRBs, and thus it seems that the aforementioned composite is a proper candidate for groundwater remediation from a wide range of metal ions.

Effects of environmental factors on the removal of heavy metals by sulfide-modified nanoscale zerovalent iron

Sulfide-modified nanoscale zerovalent iron (S-nZVI) has excellent reducing performance for heavy metals in water. The influence of environmental factors on the reactivity can be used to explore the practical feasibility of S-nZVI and analyze the reaction mechanism in depth. This study compared the removal effect and mechanism of Cu²⁺ and Ni²⁺ by nanoscale zerovalent iron (nZVI), S-nZVI, and carboxymethyl cellulose-modified nanoscale zerovalent iron (CMC-nZVI). The results show that the pseudo-first-order kinetic constant of Cu²⁺ removal by nZVI, S-nZVI, and CMC-nZVI was 1.384, 1.919, and 2.890 min^-1, respectively, and the rate of Ni²⁺ removal was 0.304, 0.931, and 0.360 min^-1, respectively. The removal mechanism of S-nZVI was similar to that of nZVI and CMC-nZVI. Specifically, Cu²⁺ was predominantly removed by reduction, while Ni²⁺ removal included adsorption and reduction. Environmental factors had a specific inhibitory effect on the removal of Cu²⁺ but had a negligible impact on Ni²⁺. The condition of low pH, the presence of Cl^- and humic acid (HA) promoted the corrosion consumption of Fe⁰, in which H⁺ directly corroded Fe⁰ at low pH. At the same time, Cl^- and HA inhibited the adsorption or binding of heavy metal ions on the particle surface, thereby reducing the electron transfer and utilization efficiency. The passivation of NO₃^- reduced the anaerobic corrosion of the material in water but suppressed the release of electrons, thereby reducing the reduction efficiency of the three types of materials. The anaerobic corrosion of S-nZVI was less affected by environmental factors, and it can still maintain more than 80% of the electronic utilization efficiency under different environmental factors, which illustrates that S-nZVI has broad prospects for practical applications in heavy metal polluted water.

Removal of heavy metals in aquatic environment by graphene oxide composites: a review

As the most important graphene derivate, graphene oxide (GO) is a high-efficient adsorbent for the removal of heavy metals in aquatic environment due to its abundant oxygen functional groups, enormous specific area, and strong hydrophilia. However, there are some drawbacks, such as easily aggregating and difficult separation, restricting the environmental application of GO. GO is not a suitable adsorbent by itself. Hence, some materials were used to synthesize GO composites, and GO composites are commonly characterized by high adsorption capacity to overcome the above drawbacks. This review discusses five main GO composites-GO-chitosan, GO-alginate, GO-SiO₂, NZVI-rGO, and magnetic GO composites-and summarizes the synthesis methods of GO composites and its application for the removal of heavy metals in aquatic environments. The influencing factors, adsorption capacities, and mechanisms related to the removal of heavy metals by GO composites are highlighted. Lastly, the application potentials and challenges of GO composites for aqueous environmental remediation are discussed. Graphical abstract.

Vinegar residue supported nanoscale zero-valent iron: Remediation of hexavalent chromium in soil

A composite material comprising of nanoscale zero-valent iron (nZVI) supported on vinegar residue (nZVI@VR) was prepared and applied for remediation of soils contaminated by hexavalent chromium (Cr(VI)). Sedimentation test results revealed that the nZVI@VR displayed enhanced stability in comparison to the bare-nZVI. Remediation experiments exhibited the immobilization efficiency of Cr(VI) and Cr_total was 98.68% and 92.09%, respectively, when using 10 g nZVI@VR (nZVI 5%) per 200 g Cr-contaminated soil (198.20 mg kg^-1 Cr(VI), 387.24 mg kg^-1 Cr_total) after two weeks of incubation. Further analyses demonstrated that almost all the exchangeable Cr was transformed into Fe-Mn oxide bound and organic matter bound. Moreover, the application of nZVI@VR enhanced soil organic carbon content and reduced redox potential. After granulation, the immobilization efficiency of Cr(VI) and Cr_total achieved 100% and 91.83% at a dosage of 10% granular nZVI@VR. Granular nZVI@VR also accelerated the transform of more available Cr (exchangeable and bound to carbonates) into less available fractions (Fe-Mn oxide bound and organic matter bound), thus resulting in a remarkable reduction in the Cr bioavailability. These results prove that nZVI@VR can be an effective remediation reagent for soils contaminated by Cr(VI).

Synthesis of nano-scale zero-valent iron-reduced graphene oxide-silica nano-composites for the efficient removal of arsenic from aqueous solutions

Design and synthesis of arsenic adsorbents with high performance and excellent stability has been still a significant challenge. In this study, we anchored nano-zero-valent iron (NZVI) on the surface of graphene-silica composites (GS) with high specific surface area, forming the NZVI/GS nano-composite. The prepared nano-materials were used to remove As(III) and As(V) through adsorption from aqueous solutions. The results indicated that NZVI particles were dispersed well on the surface of GS, and the NZVI/GS showed great potential to remove As(III) and As(V). Adsorption performance of NZVI/GS for As(III) and As(V) highly depended on the pH of solutions. The experimental data fitted well with the pseudo-second-order kinetic model and the Langmuir isotherm model. The calculated maximum adsorption capacities of NZVI/GS for As(III) and As(V) were up to 45.57 mg/g and 45.12 mg/g at 298 K, respectively, and the adsorption equilibrium could be reached within 60 min. The residual concentrations of As(III) and As(V) after treatment with 0.4 g/L NZVI/GS can meet with the drinking water standard of WHO when the initial concentrations were below 4 mg/L and 3 mg/L, respectively. Moreover, the as-prepared NZVI/GS had excellent anti-interference ability during the process of As removal in the presence of foreign ions. During the As removal process, As(III) was oxidized to As(V), which could be removed through adsorption by electrostatic attraction and complexation. These results indicated that the as-synthesized NZVI/GS composite is a promising adsorbent for the removal of arsenic from aqueous solutions.

Mechanisms and reutilization of modified biochar used for removal of heavy metals from wastewater: A review

Heavy metals (HMs) pose serious threat to both human and environmental health and therefore, effective and low-cost techniques to remove HMs are urgently required. Because HMs are difficult to be biodegraded and transformed, adsorption is a most promising treatment method in recent times. Biochar (BC), a low-cost and sustainable adsorbent material, has recently attracted much research attention due to its broad application prospects. While BC has many merits, it has a lower HMs adsorption efficiency than traditional activated carbon, limiting its practical applications. Furthermore, the HMs retained by BC are difficult to be desorbed, making the used sorbent material hazardous wastes if not well disposed of under natural conditions. Therefore, it is critical to seek effective surface modifications for BC, to improve its ability to HMs removal ability and the recyclability of BC loaded with HMs. This review represents and evaluates the reported modification methods for BC, the corresponding HMs removal mechanisms and the potential for reutilization of BC loaded with HMs. This review provides a basis for the effective practical application of BC in the treatment of HMs containing wastewater.

Environmental remediation of heavy metal ions by novel-nanomaterials: A review

Recently, novel-nanomaterials with excellent sorption capacities, mild stability, and environmental-friendly performance, have enabled massive developments in capturing heavy metal ions. This review firstly introduces the preparation and modification of novel-nanomaterials (e.g., MOFs, nZVI, MXenes, and g-C₃N₄). Then, the heavy metal ions' sorption properties and the impact of environmental conditions have been discussed. Subsequently, the sorption mechanisms are verified through batch experiments, spectral analysis, surface complexation models, and theoretical calculations. Finally, the applications prospects of novel-nanomaterials in removing heavy metal ion polluted water have also been discussed, which provide perspective for future in-depth research and practical applications.

Polyaniline/attapulgite-supported nanoscale zero-valent iron for the rival removal of azo dyes in aqueous solution

In this paper, polyaniline/attapulgite (PANI/APT)-supported nanoscale zero-valent iron (nZVI) composites were synthesized by liquid-phase chemical reduction method and used for the removal of two kinds of dyes. The structure of as-prepared nZVI/PANI/APT was characterized by various test methods. The removal property and degradation mechanism for azo (alizarin yellow R, methyl red, chrome black T, methyl orange) and non-azo (methylene blue, rhodamine B) dyes in aqueous solution were investigated. The presence of PANI/APT can decrease the aggregation of nZVI particles with maintenance of reactivity and improving adsorption capacity for degradation azo dye. The experiment results showed that the removal property of the composite materials on azo dyes is obviously better than that on non-azo dyes. The varying removal efficiencies of dyes depend on the different degradation mechanisms. Azo dyes removal by nZVI/PANI/APT was mainly due to the reductive cleavage of the N = N of nZVI, while non-azo dyes removal mainly contributes to the adsorption of PANI/APT. The study demonstrated that nZVI/PANI/APT has potential applications for the removal of azo dyes from wastewaters.

Magnetic graphene oxide-nano zero valent iron (GO-nZVI) nanohybrids synthesized using biocompatible cross-linkers for methylene blue removal

GO and nZVI have been used for removing different contaminants from aqueous solution; however, difficulty in the separation of GO, and the aggregation propensity of nZVI particles prevent them from having efficient practical applications. In this study, a green synthesis method was performed to prepare nanohybrids of GO and nZVI to provide an adsorbent with high adsorption efficiency that can be removed from aqueous solution easily by magnetic separation. GO-nZVI nanohybrids were synthesized by using biocompatible cross linkers named 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The effect of the nZVI ratio in the synthesized nanohybrids was studied at three different ratios of GO : nZVI, 1 : 1, 1 : 5 and 1 : 10. SEM/EDS, HRTEM, STEM/EDS, XRD, Raman, FTIR, and TGA analyses were conducted to provide physical and chemical properties of the adsorbents. The performance of nZVI and GO-nZVI nanohybrids as an adsorbent have been studied for methylene blue (MB) removal from an aqueous solution with an initial concentration of 12 mg L-1 at adsorbent dosages of 0.1, 0.3, 0.5, and 1 mg mL-1. Results indicated that GO-nZVI (1 : 5) provided the highest MB removal (99.1%) by using 10 mL of the 1 mg mL-1 adsorbent. After regeneration of the GO-nZVI (1 : 5) nanohybrids with ethanol, 84.3%, 67.2%, and 63.0% of MB removal were achieved in the first to third regeneration cycle. Results also showed that the GO-nZVI nanohybrids were not affected by aggregation compared to nZVI.

Reduced graphene oxide-nano zero value iron (rGO-nZVI) micro-electrolysis accelerating Cr(VI) removal in aquifer

Nanoscale zero-valent iron (nZVI) assembled on graphene oxide (GO) (rGO-nZVI) composites were synthesized by reduction of GO and ferrous ions with potassium borohydride, for use in Cr(VI) removal from aqueous solution. The results showed that the two-dimensional structure of GO could provide a skeleton support for Fe⁰, thus overcoming the bottleneck of aggregation for nZVI. Also, rGO-nZVI would form a ferric-carbon micro-electrolysis system in Cr(VI)-contaminated aquifers, enhancing and accelerating electron transfer, exhibiting high rate and capacity for Cr(VI) removal. The optimum dosage of the applied rGO-nZVI was linearly correlated with the initial Cr(VI) concentration. Characterization of rGO-nZVI before and after reaction with Cr(VI) revealed the process of Cr(VI) removal: rGO-nZVI firstly transferred electrons from Fe⁰ cores via their Fe(II)/Fe(III) shells to the GO sheet; there, negatively charged Cr(VI) received electrons and changed into positively charged Cr(III), which was adsorbed by the negatively charged GO sheet, avoiding the capping and passivating of nZVI. rGO-nZVI formed a good electrically conductive network, and thus had long-term electron releasing properties, which was important for groundwater remediation.

Metal-organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions

Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.

Polymer-based nanocomposites for heavy metal ions removal from aqueous solution: a review

A review of versatile polymer-based composites containing different functional organic and/or inorganic counterparts for the removal of hazardous metal ions from wastewater solutions.

Lead removal by a magnetic biochar derived from persulfate-ZVI treated sludge together with one-pot pyrolysis

In this study, a novel method to treat the persulfate-ZVI dewatered WAS by producing a magnetic biochar as an environmentally friendly biosorbent (nZVI-WSBC) to remove heavy metals (HMs) from wastewaters was proposed. The nZVI-WSBC exhibited good adsorption property of Pb²⁺ and the adsorption isotherm data were fitted well to Langmuir isotherm. Corresponding reaction kinetics fitted well with the pseudo second-order adsorption model. Notably, nZVI-WSBC was successfully used for efficient removal of HMs from real. This study comprehensively demonstrates the mechanisms between Pb²⁺ and nZVI-WSBC surfaces, providing a breakthrough in making a sustainable biosorbent from the dewatered iron-containing WAS.

The enhancement roles of layered double hydroxide on the reductive immobilization of selenate by nanoscale zero valent iron: Macroscopic and microscopic approaches

Herein, we utilized nanoscale zero-valent iron loaded on layered double hydroxide (NZVI/LDH) to immobilize Se(VI) and evaluated the enhancement role of LDH in the NZVI reaction system. The structural characterization indicated that LDH could stabilize and disperse NZVI as well as prevent NZVI from oxidation, thereby increasing iron reactivity. Batch experiments displayed that, compared with those by NZVI, both extent and rate of Se(VI) immobilized by NZVI/LDH significantly increased, owing to the prominent synergistic effect ascribing from adsorption and reduction. Kinetics studies under a series of conditions showed that Se(VI) reaction could be well described by pseudo first-order model. The performance of Se(VI) immobilization was inhibited to a considerable extent by most of co-existing ions, Nevertheless, the presence of Cu²⁺ improved performance of NZVI/LDH due to its role as a catalyst or medium of charge transfer during reduction. XANES revealed that LDH acted as a promoter for complete reduction of Se(VI) into Se(0)/Se(-II) over a wide pH range, whereas EXAFS suggested that LDH acted as a scavenger for insoluble products, making more reactive sites exposure to Se(VI) for reduction. These results suggested that NZVI/LDH as a promising candidate exhibited potential application in remediation of wastewaters containing Se(VI).

Macroscopic and spectroscopic studies of the enhanced scavenging of Cr(VI) and Se(VI) from water by titanate nanotube anchored nanoscale zero-valent iron

Herein, a promising titanate nanotubes (TNT) anchored nanoscale zero-valent iron (NZVI) nanocomposite (NZVI/TNT) was synthesized, characterized and used for the enhanced scavenging of Cr(VI) and Se(VI) from water. The structural identification indicated that NZVI was uniformly loaded on TNT, thereby, the oxidation and aggregation of NZVI was significantly minimized. The macroscopic experimental results indicated that NZVI/TNT exhibited higher efficiency as well as rate on Cr(VI) and Se(VI) scavenging resulted from the good synergistic effect between adsorption and reduction. Besides, TNT can weaken the inhibitory effect of co-existing humic acid (HA) and fulvic acid (FA) on the scavenging of Cr(VI) and Se(VI) by NZVI, since TNT showed strong adsorption for HA and FA that inhibit potential reactivity. XPS analysis suggested that surface-bound Fe(II) played a critical role in Cr(VI) and Se(VI) scavenging. XANES analysis demonstrated that TNT acted as a promoter for the almost complete transformation of Cr(VI) into Cr(III), and Se(VI) into Se(0)/Se(-II) in NZVI system. EXAFS analysis indicated that TNT acted as a scavenger for insoluble products, and thus more reactive sites can be used for Cr(VI) and Se(VI) reduction. The excellent performance of NZVI/TNT provide a potential material for purification and detoxification of Cr(VI) and Se(VI) from wastewater.

Nanoscale zero-valent metals: a review of synthesis, characterization, and applications to environmental remediation

Engineered nanoscale zero-valent metals (NZVMs) representing the forefront of technologies have been considered as promising materials for environmental remediation and antimicrobial effect, due to their high reducibility and strong adsorption capability. This review is focused on the methodology for synthesis of bare NZVMs, supported NZVMs, modified NZVMs, and bimetallic systems with both traditional and green methods. Recent studies have demonstrated that self-assembly methods can play an important role for obtaining ordered, controllable, and tunable NZVMs. In addition to common characterization methods, the state-of-the-art methods have been developed to obtain the properties of NZVMs (e.g., granularity, size distribution, specific surface area, shape, crystal form, and chemical bond) with the resolution down to subnanometer scale. These methods include spherical aberration corrected scanning transmission electron microscopy (Cs-corrected STEM), electron energy-loss spectroscopy (EELS), and near edge X-ray absorption fine structure (NEXAFS). A growing body of experimental data has proven that nanoscale zero-valent iron (NZVI) is highly effective and versatile. This article discusses the applications of NZVMs to treatment of heavy metals, halogenated organic compounds, polycyclic aromatic hydrocarbons, nutrients, radioelements, and microorganisms, using both ex situ and in situ methods. Furthermore, this paper briefly describes the ecotoxicological effects for NZVMs and the research prospects related to their synthesis, modification, characterization, and applications.

Environmental Remediation and Application of Nanoscale Zero-Valent Iron and Its Composites for the Removal of Heavy Metal Ions: A Review

The presence of heavy metals in the industrial effluents has recently been a challenging issue for human health. Efficient removal of heavy metal ions from environment is one of the most important issues from biological and environmental point of view, and many studies have been devoted to investigate the environmental behavior of nanoscale zerovalent iron (NZVI) for the removal of toxic heavy metal ions, present both in the surface and underground wastewater. The aim of this review is to show the excellent removal capacity and environmental remediation of NZVI-based materials for various heavy metal ions. A new look on NZVI-based materials (e.g., modified or matrix-supported NZVI materials) and possible interaction mechanism (e.g., adsorption, reduction and oxidation) and the latest environmental application. The effects of various environmental conditions (e.g., pH, temperature, coexisting oxy-anions and cations) and potential problems for the removal of heavy metal ions on NZVI-based materials with the DFT theoretical calculations and EXAFS technology are discussed. Research shows that NZVI-based materials have satisfactory removal capacities for heavy metal ions and play an important role in the environmental pollution cleanup. Possible improvement of NZVI-based materials and potential areas for future applications in environment remediation are also proposed.

Rapid degradation of dyes in water by magnetic Fe(0)/Fe3O4/graphene composites

Magnetic Fe(0)/Fe3O4/graphene has been successfully synthesized by a one-step reduction method and investigated in rapid degradation of dyes in this work. The material was characterized by N2 sorption-desorption, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), vibrating-sample magnetometer (VSM) measurements and X-ray photoelectron spectroscopy (XPS). The results indicated that Fe(0)/Fe3O4/graphene had a layered structure with Fe crystals highly dispersed in the interlayers of graphene, which could enhance the mass transfer process between Fe(0)/Fe3O4/graphene and pollutants. Fe(0)/Fe3O4/graphene exhibited ferromagnetism and could be easily separated and re-dispersed for reuse in water. Typical dyes, such as Methyl Orange, Methylene Blue and Crystal Violet, could be decolorized by Fe(0)/Fe3O4/graphene rapidly. After 20min, the decolorization efficiencies of methyl orange, methylene blue and crystal violet were 94.78%, 91.60% and 89.07%, respectively. The reaction mechanism of Fe(0)/Fe3O4/graphene with dyes mainly included adsorption and enhanced reduction by the composite. Thus, Fe(0)/Fe3O4/graphene prepared by the one-step reduction method has excellent performance in removal of dyes in water.

Enhanced sequestration of Cr(VI) by nanoscale zero-valent iron supported on layered double hydroxide by batch and XAFS study

Herein, the reduction of nanoscale zero-valent iron (NZVI) and adsorption of layered double hydroxides (LDH) to sequester Cr(VI) were well combined by the immobilization of NZVI onto LDH surface (NZVI/LDH). The characterization results revealed that LDH decreased NZVI aggregation and thus increased Cr(VI) sequestration. The batch results indicated that Cr(VI) sequestration by NZVI/LDH was higher than that of NZVI, and superior to the sum of reduction and adsorption. The LDH with good anion exchange property allowed the adsorption of Cr(VI), facilitating interfacial reaction by increasing the local concentration of Cr(VI) in the NZVI vicinity. X-ray absorption near edge structure (XANES) results indicated that Cr(VI) was almost completely reduced to Cr(III) by NZVI/LDH, but Cr(VI) was partly reduced to Cr(III) by NZVI with a trace of Cr(VI) adsorbed on corrosion products. The coordination environment of Cr from extended X-ray absorption fine structure (EXAFS) analysis revealed that LDH could be a good scavenger for the insoluble products produced during reaction. So, the insoluble products on NZVI could be reduced, and its reactivity could be maintained. These results demonstrated that NZVI/LDH exhibits multiple functionalities relevant to the remediation of Cr(VI)-contaminated sites.