Application of physiologically based pharmacokinetic modeling of novel drugs approved by the U.S. food and drug administration

Physiologically based pharmacokinetic (PBPK) models which can leverage preclinical data to predict the pharmacokinetic properties of drugs rapidly became an essential tool to improve the efficiency and quality of novel drug development. In this review, by searching the Application Review Files in Drugs@FDA, we analyzed the current application of PBPK models in novel drugs approved by the U.S. Food and Drug Administration (FDA) in the past five years. According to the results, 243 novel drugs were approved by the FDA from 2019 to 2023. During this period, 74 Application Review Files of novel drugs approved by the FDA that used PBPK models. PBPK models were used in various areas, including drug-drug interactions (DDI), organ impairment (OI) patients, pediatrics, drug-gene interaction (DGI), disease impact, and food effects. DDI was the most widely used area of PBPK models for novel drugs, accounting for 74.2 % of the total. Software platforms with graphical user interfaces (GUI) have reduced the difficulty of PBPK modeling, and Simcyp was the most popular software platform among applicants, with a usage rate of 80.5 %. Despite its challenges, PBPK has demonstrated its potential in novel drug development, and a growing number of successful cases provide experience learned for researchers in the industry.

Physiologically Based Pharmacokinetic Modeling of Lacosamide in Patients With Hepatic and Renal Impairment and Pediatric Populations to Support Pediatric Dosing Optimization

PURPOSE

Lacosamide (LCM) is a new-generation anti-seizure medication that is efficacious in patients with focal seizures with or without secondary generalization. Until now, the efficacy, safety, and tolerability of LCM are still lacking in Chinese epilepsy patients, particularly for pediatric populations and patients with renal or hepatic impairment.

METHODS

This study was conducted to develop a physiologically based pharmacokinetic (PBPK) model to characterize the pharmacokinetics of LCM in Chinese populations and predict the pharmacokinetics of LCM in Chinese pediatric populations and patients with renal or hepatic impairment. Using data from clinical investigations, the developed PBPK model was validated by comparing predicted and observed blood concentration data.

FINDINGS

Doses should be reduced to approximately 82%, 75%, 63%, and 76% of the Chinese healthy adult dose in patients with mild, moderate, and severe renal impairment and end-stage renal disease; and approximately 89%, 72%, and 36% of the Chinese healthy adult dose in patients with Child Pugh-A, B, and C hepatic impairment. For pediatric populations, intravenous doses should be adjusted to 1.75 mg/kg for newborns, 2.5 mg/kg for toddlers, 2.2 mg/kg mg for preschool and school age, and 2 mg/kg mg for adolescents to achieve an equivalent plasma exposure of 2 mg/kg LCM in adults. The oral doses should be adjusted to 20 mg for toddlers, 32 mg for preschool, 45 mg for school age, and 95 mg for adolescents to achieve an approximately equivalent plasma exposure of 100 mg LCM in adults.

IMPLICATIONS

The PBPK model of LCM can be utilized to optimize dosage regimens for special populations.

Physiologically based pharmacokinetic modeling of apixaban to predict exposure in populations with hepatic and renal impairment and elderly populations

BACKGROUND

Apixaban is a factor Xa inhibitor with a limited therapeutic index that belongs to the family of oral direct anticoagulants. The pharmacokinetic (PK) behavior of apixaban may be altered in elderly populations and populations with renal or hepatic impairment, necessitating dosage adjustments.

METHODS

This study was conducted to examine how the physiologically based pharmacokinetic (PBPK) model describes the PKs of apixaban in adult and elderly populations and to determine the PKs of apixaban in elderly populations with renal and hepatic impairment. After PBPK models were constructed using the reported physicochemical properties of apixaban and clinical data, they were validated using data from clinical studies involving various dose ranges. Comparing predicted and observed blood concentration data and PK parameters was utilized to evaluate the model's fit performance.

RESULTS

Doses should be reduced to approximately 70% of the healthy adult population for the healthy elderly population to achieve the same PK exposure; approximately 88%, 71%, and 89% of that for the elderly populations with mild, moderate, and severe renal impairment, respectively; and approximately 96%, 81%, and 58% of that for the Child Pugh-A, Child Pugh-B, and Child Pugh-C hepatic impairment elderly populations, respectively to achieve the same PK exposure.

CONCLUSION

The findings indicate that the renal and hepatic function might be considered for apixaban therapy in Chinese elderly patients and the PBPK model can be used to optimize dosage regimens for specific populations.

Physiologically based pharmacokinetic modeling of candesartan to predict the exposure in hepatic and renal impairment and elderly populations

Background

Candesartan cilexetil is a widely used angiotensin II receptor blocker with minimal adverse effects and high tolerability for the treatment of hypertension. Candesartan is administered orally as the prodrug candesartan cilexetil, which is wholly and swiftly converted to the active metabolite candesartan by carboxylesterase during absorption in the intestinal tract. In populations with renal or hepatic impairment, candesartan's pharmacokinetic (PK) behavior may be altered, necessitating dosage adjustments.

Objectives

This study was conducted to examine how the physiologically based PK (PBPK) model characterizes the PKs of candesartan in adult and geriatric populations and to predict the PKs of candesartan in elderly populations with renal and hepatic impairment.

Design

After developing PBPK models using the reported physicochemical properties of candesartan and clinical data, these models were validated using data from clinical investigations involving various dose ranges.

Methods

Comparing predicted and observed blood concentration data and PK parameters was used to assess the fit performance of the models.

Results

Doses should be reduced to approximately 94% of Chinese healthy adults for the Chinese healthy elderly population; approximately 92%, 68%, and 64% of that of the Chinese healthy adult dose in elderly populations with mild, moderate, and severe renal impairment, respectively; and approximately 72%, 71%, and 52% of that of the Chinese healthy adult dose in elderly populations with Child-Pugh-A, Child-Pugh-B, and Child-Pugh-C hepatic impairment, respectively.

Conclusion

The results suggest that the PBPK model of candesartan can be utilized to optimize dosage regimens for special populations.

Physiologically based pharmacokinetic (PBPK) modelling of oral drug absorption in older adults - an AGePOP review

The older population consisting of persons aged 65 years or older is the fastest-growing population group and also the major consumer of pharmaceutical products. Due to the heterogenous ageing process, this age group shows high interindividual variability in the dose-exposure-response relationship and, thus, a prediction of drug safety and efficacy is challenging. Although physiologically based pharmacokinetic (PBPK) modelling is a well-established tool to inform and confirm drug dosing strategies during drug development for special population groups, age-related changes in absorption are poorly accounted for in current PBPK models. The purpose of this review is to summarise the current state-of-knowledge in terms of physiological changes with increasing age that can influence the oral absorption of dosage forms. The capacity of common PBPK platforms to incorporate these changes and describe the older population is also discussed, as well as the implications of extrinsic factors such as drug-drug interactions associated with polypharmacy on the model development process. The future potential of this field will rely on addressing the gaps identified in this article, which can subsequently supplement in-vitro and in-vivo data for more robust decision-making on the adequacy of the formulation for use in older adults and inform pharmacotherapy.

Progressive tools and critical strategies for development of best fit PBPK model aiming better in vitro-in vivo correlation

Nowadays, conducting discriminative dissolution experiments employing physiologically based pharmacokinetic modeling (PBPK) or physiologically based biopharmaceutical modeling (PBBM) is gaining significant importance in quantitatively predicting oral absorption of drugs. Mechanistic understanding of each process involved in drug absorption and its impact on the performance greatly facilitates designing a formulation with high confidence. Unfortunately, the biggest challenge scientists are facing in current days is the lack of standardized protocol for integrating dissolution experiment data during PBPK modeling. However, in vitro-in vivo drug release interrelation can be improved with the consideration and development of appropriate biorelevant dissolution media that closely mimic physiological conditions. Multiple reported dissolution models have described nature and functionality of different regions of the gastrointestinal tract (GI) to more accurately design discriminative dissolution media. Dissolution experiment data can be integrated either mechanistically or without a mechanism depending primarily on the formulation type, biopharmaceutics classification system (BCS) class and particle size of the drug substance. All such parameters are required to be considered for selecting the appropriate functions during PBPK modeling to produce a best fit model. The primary focus of this review is to critically discuss various progressive dissolution models and tools, existing challenges and approaches for establishing best fit PBPK model aiming better in vitro-in vivo correlation (IVIVC). Strategies for proper selection of dissolution models as an input function in PBPK/PBBM modeling have also been critically discussed. Logical and scientific pathway for selection of different type of functions and integration events in the commercially available in silico software has been described through case studies.

All Roads Lead to Rome: Enhancing the Probability of Target Attainment with Different Pharmacokinetic/Pharmacodynamic Modelling Approaches

In light of rising antimicrobial resistance and a decreasing number of antibiotics with novel modes of action, it is of utmost importance to accelerate development of novel treatment options. One aspect of acceleration is to understand pharmacokinetics (PK) and pharmacodynamics (PD) of drugs and to assess the probability of target attainment (PTA). Several in vitro and in vivo methods are deployed to determine these parameters, such as time-kill-curves, hollow-fiber infection models or animal models. However, to date the use of in silico methods to predict PK/PD and PTA is increasing. Since there is not just one way to perform the in silico analysis, we embarked on reviewing for which indications and how PK and PK/PD models as well as PTA analysis has been used to contribute to the understanding of the PK and PD of a drug. Therefore, we examined four recent examples in more detail, namely ceftazidime-avibactam, omadacycline, gepotidacin and zoliflodacin as well as cefiderocol. Whereas the first two compound classes mainly relied on the ‘classical’ development path and PK/PD was only deployed after approval, cefiderocol highly profited from in silico techniques that led to its approval. Finally, this review shall highlight current developments and possibilities to accelerate drug development, especially for anti-infectives.

Saliva Sampling in Therapeutic Drug Monitoring and Physiologically Based Pharmacokinetic Modeling: Review

Therapeutic drug monitoring investigations based on saliva samples can be utilized as an alternative to blood sampling for many advantages. Moreover, the development of physiologically based pharmacokinetic (PBPK) modeling tools can further help to estimate drug exposure from saliva. This review discusses the use of saliva samples and illustrates the applications and examples of PBPK modeling systems for estimating drug exposure from saliva.

Integrating Forward and Reverse Translation in PBPK Modeling to Predict Food Effect on Oral Absorption of Weakly Basic Drugs

INTRODUCTION

Ketoconazole and posaconazole are two weakly basic broad-spectrum antifungals classified as Biopharmaceutics Classification System class II drugs, indicating that they are highly permeable, but exhibit poor solubility. As a result, oral bioavailability and clinical efficacy can be impacted by the formulation performance in the gastrointestinal system. In this work, we have leveraged in vitro biopharmaceutics and clinical data available in the literature to build physiologically based pharmacokinetic (PBPK) models for ketoconazole and posaconazole, to determine the suitability of forward in vitro-in vivo translation for characterization of in vivo drug precipitation, and to predict food effect.

METHODS

A stepwise modeling approach was utilized to derive key parameters related to absorption, such as drug solubility, dissolution, and precipitation kinetics from in vitro data. These parameters were then integrated into PBPK models for the simulation of ketoconazole and posaconazole plasma concentrations in the fasted and fed states.

RESULTS

Forward in vitro-in vivo translation of intestinal precipitation kinetics for both model drugs resulted in poor predictions of PK profiles. Therefore, a reverse translation approach was applied, based on limited fitting of precipitation-related parameters to clinical data. Subsequent simulations for ketoconazole and posaconazole demonstrated that fasted and fed state PK profiles for both drugs were adequately recapitulated.

CONCLUSION

The two examples presented in this paper show how middle-out modeling approaches can be used to predict the magnitude and direction of food effects provided the model is verified on fasted state PK data.

Digital health: trends, opportunities and challenges in medical devices, pharma and bio-technology

Digital health interventions refer to the use of digital technology and connected devices to improve health outcomes and healthcare delivery. This includes telemedicine, electronic health records, wearable devices, mobile health applications, and other forms of digital health technology. To this end, several research and developmental activities in various fields are gaining momentum. For instance, in the medical devices sector, several smart biomedical materials and medical devices that are digitally enabled are rapidly being developed and introduced into clinical settings. In the pharma and allied sectors, digital health-focused technologies are widely being used through various stages of drug development, viz. computer-aided drug design, computational modeling for predictive toxicology, and big data analytics for clinical trial management. In the biotechnology and bioengineering fields, investigations are rapidly growing focus on digital health, such as omics biology, synthetic biology, systems biology, big data and personalized medicine. Though digital health-focused innovations are expanding the horizons of health in diverse ways, here the development in the fields of medical devices, pharmaceutical technologies and biotech sectors, with emphasis on trends, opportunities and challenges are reviewed. A perspective on the use of digital health in the Indian context is also included.

Does the choice of applied physiologically‐based pharmacokinetics platform matter? A case study on simvastatin disposition and drug–drug interaction

Physiologically‐based pharmacokinetic (PBPK) models have an important role in drug discovery/development and decision making in regulatory submissions. This is facilitated by predefined PBPK platforms with user‐friendly graphical interface, such as Simcyp and PK‐Sim. However, evaluations of platform differences and the potential implications for disposition‐related applications are still lacking. The aim of this study was to assess how PBPK model development, input parameters, and model output are affected by the selection of PBPK platform. This is exemplified via the establishment of simvastatin PBPK models (workflow, final models, and output) in PK‐Sim and Simcyp as representatives of established whole‐body PBPK platforms. The major finding was that the choice of PBPK platform influenced the model development strategy and the final model input parameters, however, the predictive performance of the simvastatin models was still comparable between the platforms. The main differences between the structure and implementation of Simcyp and PK‐Sim were found in the absorption and distribution models. Both platforms predicted equally well the observed simvastatin (lactone and acid) pharmacokinetics (20–80 mg), BCRP and OATP1B1 drug–gene interactions (DGIs), and drug–drug interactions (DDIs) when co‐administered with CYP3A4 and OATP1B1 inhibitors/inducers. This study illustrates that in‐depth knowledge of established PBPK platforms is needed to enable an assessment of the consequences of PBPK platform selection. Specifically, this work provides insights on software differences and potential implications when bridging PBPK knowledge between Simcyp and PK‐Sim users. Finally, it provides a simvastatin model implemented in both platforms for risk assessment of metabolism‐ and transporter‐mediated DGIs and DDIs.

Towards a comprehensive assessment of QSP models: what would it take?

Quantitative Systems Pharmacology (QSP) has emerged as a powerful ensemble of approaches aiming at developing integrated mathematical and computational models elucidating the complex interactions between pharmacology, physiology, and disease. As the field grows and matures its applications expand beyond the boundaries of research and development and slowly enter the decision making and regulatory arenas. However, widespread acceptance and eventual adoption of a new modeling approach requires assessment criteria and quantifiable metrics that establish credibility and increase confidence in model predictions. QSP aims to provide an integrated understanding of pathology in the context of therapeutic interventions. Because of its ambitious nature and the fact that QSP emerged in an uncoordinated manner as a result of activities distributed across organizations and academic institutions, high entropy characterizes the tools, methods, and computational methodologies and approaches used. The eventual acceptance of QSP model predictions as supporting material for an application to a regulatory agency will require that two key aspects are considered: (1) increase confidence in the QSP framework, which drives standardization and assessment; and (2) careful articulation of the expectations. Both rely heavily on our ability to rigorously and consistently assess QSP models. In this manuscript, we wish to discuss the meaning and purpose of such an assessment in the context of QSP model development and elaborate on the differentiating features of QSP that render such an endeavor challenging. We argue that QSP establishes a conceptual, integrative framework rather than a specific and well-defined computational methodology. QSP elicits the use of a wide variety of modeling and computational methodologies optimized with respect to specific applications and available data modalities, which exceed the data structures employed by chemometrics and PK/PD models. While the range of options fosters creativity and promises to substantially advance our ability to design pharmaceutical interventions rationally and optimally, our expectations of QSP models need to be clearly articulated and agreed on, with assessment emphasizing the scope of QSP studies rather than the methods used. Nevertheless, QSP should not be considered an independent approach, rather one of many in the broader continuum of computational models.

Simulation of Febuxostat Pharmacokinetics in Healthy Subjects and Patients with Impaired Kidney Function Using Physiologically Based Pharmacokinetic Modeling

Febuxostat is recommend by the American College of Rheumatology Gout Management Guidelines as a first-line therapy for lowering the level of urate in patients with gout. At present, this drug is being prescribed mainly based on the clinical experience of doctors. The potential effects of clinical and demographic variables on the bioavailability and therapeutic effectiveness of febuxostat are not being considered. In this study, a physiologically based pharmacokinetic (PBPK) model of febuxostat was developed, thereby providing a theoretical basis for the individualized dosing of this drug in gout patients. The plasma concentration-time profiles corresponding to healthy subjects and gout patients with normal kidney function were simulated and validated; then, the model was used to predict the pharmacokinetic (PK) data of the drug in gout patients suffering from varying degrees of impaired kidney function. The error values (the predicted value/observed value) were used to validate the simulated PK parameters predicted by the PBPK model, including the area under the plasma concentration-time curve, the maximum plasma concentration, and time to maximum plasma concentration. Considering that to all error fold changes were smaller than 2 the PBPK model was. In subjects suffering from mild kidney impairment, moderate kidney impairment, severe kidney impairment, and end-stage kidney disease (ESRD), the predicted AUC_0-24h values increased by 1.62, 1.74, 2.27, and 2.65-fold, respectively, compared to gout patients with normal kidney function. Overall, the results showed that the PBPK model constructed in this study predict the pharmacokinetic changes in gout patients suffering from varying degrees of impaired kidney function. This article is protected by copyright. All rights reserved.

A Mechanistic Site-Of-Action Model: A Tool for Informing Right Target, Right Compound, And Right Dose for Therapeutic Antagonistic Antibody Programs

Quantitative modeling is increasingly utilized in the drug discovery and development process, from the initial stages of target selection, through clinical studies. The modeling can provide guidance on three major questions–is this the right target, what are the right compound properties, and what is the right dose for moving the best possible candidate forward. In this manuscript, we present a site-of-action modeling framework which we apply to monoclonal antibodies against soluble targets. We give a comprehensive overview of how we construct the model and how we parametrize it and include several examples of how to apply this framework for answering the questions postulated above. The utilities and limitations of this approach are discussed.

Application of physiologically based pharmacokinetic models to promote the development of veterinary drugs with high efficacy and safety

Physiologically based pharmacokinetic (PBPK) models have become important tools for the development of novel human drugs. Food-producing animals and pets comprise an important part of human life, and the development of veterinary drugs (VDs) has greatly impacted human health. Owing to increased affordability of and demand for drug development, VD manufacturing companies should have more PBPK models required to reduce drug production costs. So far, little attention has been paid on applying PBPK models for the development of VDs. This review begins with the development processes of VDs; then summarizes case studies of PBPK models in human or VD development; and analyzes the application, potential, and advantages of PBPK in VD development, including candidate screening, formulation optimization, food effects, target-species safety, and dosing optimization. Then, the challenges of applying the PBPK model to VD development are discussed. Finally, future opportunities of PBPK models in designing dosing regimens for intracellular pathogenic infections and for efficient oral absorption of VDs are further forecasted. This review will be relevant to readers who are interested in using a PBPK model to develop new VDs.

Physiological-based pharmacokinetic modeling trends in pharmaceutical drug development over the last 20-years; in-depth analysis of applications, organizations, and platforms

We assess the advancement of physiologically based pharmacokinetic (PBPK) modeling and simulation (M&S) over the last 20 years (start of 2000 to end of 2019) focusing on the trends in each decade with the relative contributions from different organizations, areas of applications, and software tools used. Unlike many of the previous publications which focused on regulatory applications, our analysis is based on PBPK publications in peer-reviewed journals based on a large sample (>700 original articles). We estimated a rate of growth for PBPK (>40 fold/20 years) that was much steeper than the general pharmacokinetic modeling (<3 fold/20 years) or overall scientific publications (∼3 fold/20 years). The analyses demonstrated that contrary to commonly held belief, commercial specialized PBPK platforms with graphical-user interface were a much more popular choice than open-source alternatives even within academic organizations. These platforms constituted 81% of the whole set of the sample we assessed. The major PBPK applications (top 3) were associated with the study design, predicting formulation effects, and metabolic drug-drug interactions, while studying the fate of drugs in special populations, predicting kinetics in early drug development, and investigating transporter drug interactions have increased proportionally over the last decade. The proportions of application areas based on published research were distinctively different from those shown previously for the regulatory submissions and impact on labels. This may demonstrate the lag time between the research applications versus verified usage within the regulatory framework. The report showed the trend of overall PBPK publications in pharmacology drug development from the past 2 decades stratified by the organizations involved, software used, and area of applications. The analysis showed a more rapid increase in PBPK than that of the pharmacokinetic space itself with an equal contribution from academia and industry. By establishing and recording the journey of PBPK modeling in the past and looking at its current status, the analysis can be used for devising plans based on the anticipated trajectory of future regulatory applications.

Predicting topical drug clearance from the skin

For topical drug products that target sites of action in the viable epidermal and/or upper dermal compartment of the skin, the local concentration profiles have proven difficult to quantify because drug clearance from the viable cutaneous tissue is not well characterised. Without such knowledge, of course, it is difficult-if not impossible-to predict a priori whether and over what time frame a topical formulation will permit an effective concentration of drug within the skin 'compartment' to be achieved. Here, we test the hypothesis that valuable information about drug disposition, and specifically its clearance, in this experimentally difficult-to-access compartment (at least, in vivo) can be derived from available systemic pharmacokinetic data for drugs administered via transdermal delivery systems. A multiple regression analysis was undertaken to determine the best-fit empirical correlation relating clearance from the skin to known or easily calculable drug properties. It was possible, in this way, to demonstrate a clear relationship between drug clearance from the skin and key physical chemical properties of the drug (molecular weight, log P and topological polar surface area). It was further demonstrated that values predicted by the model correlated well with those derived from in vitro skin experiments.

Computational Approaches in Preclinical Studies on Drug Discovery and Development

Because undesirable pharmacokinetics and toxicity are significant reasons for the failure of drug development in the costly late stage, it has been widely recognized that drug ADMET properties should be considered as early as possible to reduce failure rates in the clinical phase of drug discovery. Concurrently, drug recalls have become increasingly common in recent years, prompting pharmaceutical companies to increase attention toward the safety evaluation of preclinical drugs. In vitro and in vivo drug evaluation techniques are currently more mature in preclinical applications, but these technologies are costly. In recent years, with the rapid development of computer science, in silico technology has been widely used to evaluate the relevant properties of drugs in the preclinical stage and has produced many software programs and in silico models, further promoting the study of ADMET in vitro. In this review, we first introduce the two ADMET prediction categories (molecular modeling and data modeling). Then, we perform a systematic classification and description of the databases and software commonly used for ADMET prediction. We focus on some widely studied ADMT properties as well as PBPK simulation, and we list some applications that are related to the prediction categories and web tools. Finally, we discuss challenges and limitations in the preclinical area and propose some suggestions and prospects for the future.

Evaluation of the Impacts of Formulation Parameters on the Pharmacokinetics and Bioequivalence of Risperidone Orodispersible Film: a Physiologically Based Pharmacokinetic Modeling Approach

The purpose of this study was to investigate the impacts of the formulation parameters on the pharmacokinetics and bioequivalence of risperidone orodispersible film (ODF) using physiologically based pharmacokinetic model. The pharmacokinetic profiles of two risperidone ODFs, which exhibit different in vitro dissolution, were examined in Beagle dogs after supralingual administration. Subsequently, a physiologically based pharmacokinetic (PBPK) model was constructed to evaluate the in vivo performance of risperidone ODF. The parameter sensitivity analysis (PSA) was used to access the impacts of formulation parameters on the pharmacokinetics of risperidone. Moreover, the validated PBPK model was applied to predict human pharmacokinetic profiles and examine the bioequivalence of these two ODFs. These two ODFs displayed similar risperidone pharmacokinetic profiles in dogs. The parameter sensitivity analysis indicated that the changes in the solubility, particle size, particle density, and diffusion coefficient did not have obvious influence on the in vivo properties of risperidone ODF. Alternation of the in vitro complete dissolution time in water from 15 to 30 min led to a 30% decrease in C_max and 20% of increase in T_max. AUC_0-∞ would be decreased if risperidone was not fully released within 1 h. As both ODFs completely released risperidone within 15 min, the difference in the extent of in vivo absorption, intestinal regional absorption location, and plasma concentration-time curves between these two ODFs was almost negligible. Consequently, a bioequivalence was foreseen in humans. The in vitro cumulative dissolution percentage in water at 15 min was found to be the major determinant on the in vivo properties of risperidone ODF. PBPK modeling appears to be an innovative strategy to guide the development of risperidone ODF.

Prediction of lisinopril pediatric dose from the reference adult dose by employing a physiologically based pharmacokinetic model

Background

This study aimed to assess the pediatric lisinopril doses using an adult physiological based pharmacokinetic (PBPK) model. As the empirical rules of dose calculation cannot calculate gender-specific pediatric doses and ignores the age-related physiological differences.

Methods

A PBPK model of lisinopril for the healthy adult population was developed for oral (fed and fasting) and IV administration using PK-Sim MoBI® and was scaled down to a virtual pediatric population for prediction of lisinopril doses in neonates to infants, infants to toddler, children at pre-school age, children at school age and the adolescents. The pharmacokinetic parameters were predicted for the above groups at decremental doses of 20 mg, 10 mg, 5 mg, 2.5 mg, and 1.5 mg in order to accomplish doses producing the pharmacokinetic parameters, similar (or comparable) to that of the adult population. The above simulated pediatric doses were compared to the doses computed using the conventional four methods, such as Young’s rule, Clark’s rule, and weight-based and body surface area-based equations and the dose reported in different studies.

Results

Though the doses predicted for all subpopulations of children were comparable to those calculated by Young’s rule, yet the conventional methods overestimated the pediatric doses when compared to the respective PBPK-predicted doses. The findings of previous real time pharmacokinetic studies in pediatric patients supported the present simulated dose.

Conclusion

Thus, PBPK seems to have predictability potential for pediatric dose since it takes into consideration the physiological changes related to age and gender.

A multilevel object-oriented modelling methodology for physiologically-based pharmacokinetics (PBPK): Evaluation with a semi-mechanistic pharmacokinetic model

BACKGROUND AND OBJECTIVE

The aims of this study are (i) to assess the predictive reliability of the physiologically based software PhysPK versus the well-known population approach software NONMEM for the cited semi-mechanistic PK model, (ii) to determine whether these modelling approaches are interchangeable and (iii) to compare acausal with causal modelling approaches in the framework of semi-mechanistic PK models.

METHODS

A semi-mechanistic model was proposed, which assumed oral administration of a solid dosage form with a peripheral compartment and two active metabolites. The model incorporates intestinal transit, dissolution limited by solubility, variable efflux transporter expression along the gut and linear and non-linear metabolism in the gut and liver. Four different approximations to the theoretical model were developed in order to validate both the new software and modelling methodology.

RESULTS

Plasmatic concentrations correlation plots as well as relative errors in AUC_0-48 and C_max predictions revealed the accuracy of PhysPK in the prediction of these exposition parameters. Physiological and acausal object oriented version systematically under-estimated AUC_0-48 and C_max of the parent drug, whereas metabolites were over-estimated when taking the semi-mechanistic and extraction-based metabolism version as the reference.

CONCLUSIONS

PhysPK has been properly validated, where differences are related to numerical precision of integrators and solvers. A systematic bias for the parent drug and active metabolites was predicted when a semi-mechanistic approach including extraction-based metabolism was compared to the physiologic and acausal approach, showing that interchangeability might be possible when intrinsic-clearance metabolism is implemented in the semi-mechanistic approach. The acausal and object-oriented methodology allows for defining the semi-mechanistic model through its local mechanisms and relationships among entities, without the need to build the final set of Ordinary Differential Equations.

In Vitro Dissolution and in Silico Modeling Shortcuts in Bioequivalence Testing

Purpose: To review in vitro testing and simulation platforms that are in current use to predict in vivo performances of generic products as well as other situations to provide evidence for biowaiver and support drug formulations development. Methods: Pubmed and Google Scholar databases were used to review published literature over the past 10 years. The terms used were “simulation AND bioequivalence” and “modeling AND bioequivalence” in the title field of databases, followed by screening, and then reviewing. Results: A total of 22 research papers were reviewed. Computer simulation using software such as GastroPlus™, PK-Sim^® and SimCyp^® find applications in drug modeling. Considering the wide use of optimization for in silico predictions to fit observed data, a careful review of publications is required to validate the reliability of these platforms. For immediate release (IR) drug products belonging to the Biopharmaceutics Classification System (BCS) classes I and III, difference factor (ƒ₁) and similarity factor (ƒ₂) are calculated from the in vitro dissolution data of drug formulations to support biowaiver; however, this method can be more discriminatory and may not be useful for all dissolution profiles. Conclusions: Computer simulation platforms need to improve their mechanistic physiologically based pharmacokinetic (PBPK) modeling, and if prospectively validated within a small percentage of error from the observed clinical data, they can be valuable tools in bioequivalence (BE) testing and formulation development.

ABC Transporters at the Blood-Brain Interfaces, Their Study Models, and Drug Delivery Implications in Gliomas

Drug delivery into the brain is regulated by the blood-brain interfaces. The blood-brain barrier (BBB), the blood-cerebrospinal fluid barrier (BCSFB), and the blood-arachnoid barrier (BAB) regulate the exchange of substances between the blood and brain parenchyma. These selective barriers present a high impermeability to most substances, with the selective transport of nutrients and transporters preventing the entry and accumulation of possibly toxic molecules, comprising many therapeutic drugs. Transporters of the ATP-binding cassette (ABC) superfamily have an important role in drug delivery, because they extrude a broad molecular diversity of xenobiotics, including several anticancer drugs, preventing their entry into the brain. Gliomas are the most common primary tumors diagnosed in adults, which are often characterized by a poor prognosis, notably in the case of high-grade gliomas. Therapeutic treatments frequently fail due to the difficulty of delivering drugs through the brain barriers, adding to diverse mechanisms developed by the cancer, including the overexpression or expression de novo of ABC transporters in tumoral cells and/or in the endothelial cells forming the blood-brain tumor barrier (BBTB). Many models have been developed to study the phenotype, molecular characteristics, and function of the blood-brain interfaces as well as to evaluate drug permeability into the brain. These include in vitro, in vivo, and in silico models, which together can help us to better understand their implication in drug resistance and to develop new therapeutics or delivery strategies to improve the treatment of pathologies of the central nervous system (CNS). In this review, we present the principal characteristics of the blood-brain interfaces; then, we focus on the ABC transporters present on them and their implication in drug delivery; next, we present some of the most important models used for the study of drug transport; finally, we summarize the implication of ABC transporters in glioma and the BBTB in drug resistance and the strategies to improve the delivery of CNS anticancer drugs.

Ocular biopharmaceutics: impact of modeling and simulation on topical ophthalmic formulation development

The estimation of ocular pharmacokinetics (PK) in various eye tissues is limited because of sampling challenges. Computational modeling and simulation (M&S) tools underpinning the elucidation of drug access routes and prediction of ocular exposure are essential for the mechanistic assessment of biopharmaceutics in the eye. Therefore, theoretical and experimental evaluation of ocular absorption and transit models is necessary. Biopharmaceutical parameter sensitivity analysis based on permeability and drug dose illustrates utility in ocular drug delivery assessment, which could have innovative and cost-saving impacts on ophthalmic product development and therapeutic bioequivalence (BE) evaluations.

Biopharmaceutical considerations in paediatrics with a view to the evaluation of orally administered drug products - a PEARRL review

OBJECTIVES

In this review, the current biopharmaceutical approaches for evaluation of oral formulation performance in paediatrics are discussed.

KEY FINDINGS

The paediatric gastrointestinal (GI) tract undergoes numerous morphological and physiological changes throughout its development and growth. Some physiological parameters are yet to be investigated, limiting the use of the existing in vitro biopharmaceutical tools to predict the in vivo performance of paediatric formulations. Meals and frequencies of their administration evolve during childhood and affect oral drug absorption. Furthermore, the establishment of a paediatric Biopharmaceutics Classification System (pBCS), based on the adult Biopharmaceutics Classification System (BCS), requires criteria adjustments. The usefulness of computational simulation and modeling for extrapolation of adult data to paediatrics has been confirmed as a tool for predicting drug formulation performance. Despite the great number of successful physiologically based pharmacokinetic models to simulate drug disposition, the simulation of drug absorption from the GI tract is a complicating issue in paediatric populations.

SUMMARY

The biopharmaceutics tools for investigation of oral drug absorption in paediatrics need further development, refinement and validation. A combination of in vitro and in silico methods could compensate for the uncertainties accompanying each method on its own.

In silico (computed) modelling of doses and dosing regimens associated with morphine levels above international legal driving limits

BACKGROUND

Morphine can cause central nervous system side effects which impair driving skills. The legal blood morphine concentration limit for driving is 20 µg/L in France/Poland/Netherlands and 80 µg/L in England/Wales. There is no guidance as to the morphine dose leading to this concentration.

AIM

The in silico (computed) relationship of oral morphine dose and plasma concentration was modelled to provide dose estimates for a morphine plasma concentration above 20 and 80 µg/L in different patient groups.

DESIGN

A dose-concentration model for different genders, ages and oral morphine formulations, validated against clinical pharmacokinetic data, was generated using Simcyp^®, a population-based pharmacokinetic simulator.

SETTING/PARTICIPANTS

Healthy Northern European population parameters were used with age, gender and renal function being varied in the different simulation groups. In total, 36,000 simulated human subjects (100 per modelled group of different ages and gender) received repeated simulated morphine dosing with modified-release or immediate-release formulations.

RESULTS

Older age, women, modified-release formulation and worse renal function were associated with higher plasma concentrations. Across all groups, morphine doses below 20 mg/day were unlikely to result in a morphine plasma concentration above 20 µg/L; this was 80 mg/day with the 80 µg/L limit.

CONCLUSION

This novel study provides predictions of the in silico (computed) dose-concentration relationship for international application. Individualised morphine prescribing decisions by clinicians must be informed by clinical judgement considering the individual patient's level of impairment and insight irrespective of the blood morphine concentration as people who have impaired driving will be breaking the law. Taking into account expected morphine concentrations enables improved individualised decision making.

Computational modeling of human oral bioavailability: what will be next?

INTRODUCTION

The oral route is the most convenient way of administrating drugs. Therefore, accurate determination of oral bioavailability is paramount during drug discovery and development. Quantitative structure-property relationship (QSPR), rule-of-thumb (RoT) and physiologically based-pharmacokinetic (PBPK) approaches are promising alternatives to the early oral bioavailability prediction. Areas covered: The authors give insight into the factors affecting bioavailability, the fundamental theoretical framework and the practical aspects of computational methods for predicting this property. They also give their perspectives on future computational models for estimating oral bioavailability. Expert opinion: Oral bioavailability is a multi-factorial pharmacokinetic property with its accurate prediction challenging. For RoT and QSPR modeling, the reliability of datasets, the significance of molecular descriptor families and the diversity of chemometric tools used are important factors that define model predictability and interpretability. Likewise, for PBPK modeling the integrity of the pharmacokinetic data, the number of input parameters, the complexity of statistical analysis and the software packages used are relevant factors in bioavailability prediction. Although these approaches have been utilized independently, the tendency to use hybrid QSPR-PBPK approaches together with the exploration of ensemble and deep-learning systems for QSPR modeling of oral bioavailability has opened new avenues for development promising tools for oral bioavailability prediction.

Oral drug absorption in pediatrics: the intestinal wall, its developmental changes and current tools for predictions

The dissolution, intestinal absorption and presystemic metabolism of a drug depend on its physicochemical characteristics but also on numerous physiological (e.g. gastrointestinal pH, volume, transit time, morphology) and biochemical factors (e.g. luminal enzymes and flora, intestinal wall enzymes and transporters). Over the past decade, evidence has accumulated indicating that these factors may differ in children and adults resulting in age-related changes in drug exposure and drug response. Thus, drug dosage may require adjustment for the pediatric population to ensure the desired therapeutic outcome and to avoid side-effects. Although tremendous progress has been made in understanding the effects of age on intestinal physiology and function, significant knowledge gaps remain. Studying and predicting pharmacokinetics in pediatric patients remains challenging due to ethical concerns associated with clinical trials in this vulnerable population, and because of the paucity of predictive in vitro and in vivo animal assays. This review details the current knowledge related to developmental changes determining intestinal drug absorption and pre-systemic metabolism. Supporting experimental approaches as well as physiologically based pharmacokinetic modeling are also discussed together with their limitations and challenges. Copyright © 2016 John Wiley & Sons, Ltd.

Toxicokinetic models and related tools in environmental risk assessment of chemicals

Environmental risk assessment of chemicals for the protection of ecosystems integrity is a key regulatory and scientific research field which is undergoing constant development in modelling approaches and harmonisation with human risk assessment. This review focuses on state-of-the-art toxicokinetic tools and models that have been applied to terrestrial and aquatic species relevant to environmental risk assessment of chemicals. Both empirical and mechanistic toxicokinetic models are discussed using the results of extensive literature searches together with tools and software for their calibration and an overview of applications in environmental risk assessment. These include simple tools such as one-compartment models, multi-compartment models to physiologically-based toxicokinetic (PBTK) models, mostly available for aquatic species such as fish species and a number of chemical classes including plant protection products, metals, persistent organic pollutants, nanoparticles. Data gaps and further research needs are highlighted.

Physiologically based pharmacokinetic models of small molecules and therapeutic antibodies: a mini-review on fundamental concepts and applications

The mechanisms of absorption, distribution, metabolism and elimination of small and large molecule therapeutics differ significantly from one another and can be explored within the framework of a physiologically based pharmacokinetic (PBPK) model. This paper briefly reviews fundamental approaches to PBPK modeling, in which drug kinetics within tissues and organs are explicitly represented using physiologically meaningful parameters. The differences in PBPK models applied to small/large molecule drugs are highlighted, thus elucidating differences in absorption, distribution and elimination properties between these two classes of drugs in a systematic manner. The absorption of small and large molecules differs with respect to their common extravascular routes of delivery (oral versus subcutaneous). The role of the lymphatic system in drug distribution, and the involvement of tissues as sites of elimination (through catabolism and target mediated drug disposition) are unique features of antibody distribution and elimination that differ from small molecules, which are commonly distributed into the tissues but are eliminated primarily by liver metabolism. Fundamental differences exist in the ability to predict human pharmacokinetics based upon preclinical data due to differing mechanisms governing small and large molecule disposition. These differences have influence on the evolving utilization of PBPK modeling in the discovery and development of small and large molecule therapeutics.

Assessment of DCE-MRI parameters for brain tumors through implementation of physiologically-based pharmacokinetic model approaches for Gd-DOTA

Dynamic-contrast enhanced magnetic resonance imaging (DCE-MRI) is used for detailed characterization of pathology of lesions sites, such as brain tumors, by quantitative analysis of tracer's data through the use of pharmacokinetic (PK) models. A key component for PK models in DCE-MRI is the estimation of the concentration-time profile of the tracer in a nearby vessel, referred as Arterial Input Function (AIF). The aim of this work was to assess through full body physiologically-based pharmacokinetic (PBPK) model approaches the PK profile of gadoteric acid (Gd-DOTA) and explore potential application for parameter estimation in DCE-MRI based on PBPK-derived AIFs. The PBPK simulations were generated through Simcyp(®) platform and the predicted PK parameters for Gd-DOTA were compared with available clinical data regarding healthy volunteers and renal impairment patients. The assessment of DCE-MRI parameters was implemented by utilizing similar virtual profiles based on gender, age and weight to clinical profiles of patients diagnosed with glioblastoma multiforme. The PBPK-derived AIFs were then used to compute DCE-MRI parameters through the Extended Tofts Model and compared with the corresponding ones derived from image-based AIF computation. The comparison involved: (i) image measured AIF of patients vs AIF of in silico profile, and, (ii) population average AIF vs in silico mean AIFs. The results indicate that PBPK-derived AIFs allowed the estimation of comparable imaging biomarkers with those calculated from typical DCE-MRI image analysis. The incorporation of PBPK models and potential utilization of in silico profiles to real patient data, can provide new perspectives in DCE-MRI parameter estimation and data analysis.

Recent Advances in Development and Application of Physiologically-Based Pharmacokinetic (PBPK) Models: a Transition from Academic Curiosity to Regulatory Acceptance

There is a renewed surge of interest in applications of physiologically-based pharmacokinetic (PBPK) models by the pharmaceutical industry and regulatory agencies. Developing PBPK models within a systems pharmacology context allows separation of the parameters pertaining to the animal or human body (the system) from that of the drug and the study design which is essential to develop generic drug-independent models used to extrapolate PK/PD properties in various healthy and patient populations. This has expanded the classical paradigm to a ‘predict-learn-confirm-apply’ concept. Recently, a number of drug labels are informed by simulation results generated using PBPK models. These cases show that either the simulations are used in lieu of conducting clinical studies or have informed the drug label that otherwise would have been silent in some specific situations. It will not be surprising to see applications of these models in implementing precision dosing at the point of care in the near future.

Quantitative Systems Pharmacology: A Framework for Context

Quantitative Systems Pharmacology (QSP) is receiving increased attention. As the momentum builds and the expectations grow it is important to (re)assess and formalize the basic concepts and approaches. In this short review, I argue that QSP, in addition to enabling the rational integration of data and development of complex models, maybe more importantly, provides the foundations for developing an integrated framework for the assessment of drugs and their impact on disease within a broader context expanding the envelope to account in great detail for physiology, environment and prior history. I articulate some of the critical enablers, major obstacles and exciting opportunities manifesting themselves along the way. Charting such overarching themes will enable practitioners to identify major and defining factors as the field progressively moves towards personalized and precision health care delivery.

A physiome interoperability roadmap for personalized drug development

The goal of developing therapies and dosage regimes for characterized subgroups of the general population can be facilitated by the use of simulation models able to incorporate information about inter-individual variability in drug disposition (pharmacokinetics), toxicity and response effect (pharmacodynamics). Such observed variability can have multiple causes at various scales, ranging from gross anatomical differences to differences in genome sequence. Relevant data for many of these aspects, particularly related to molecular assays (known as '-omics'), are available in online resources, but identification and assignment to appropriate model variables and parameters is a significant bottleneck in the model development process. Through its efforts to standardize annotation with consequent increase in data usability, the human physiome project has a vital role in improving productivity in model development and, thus, the development of personalized therapy regimes. Here, we review the current status of personalized medicine in clinical practice, outline some of the challenges that must be overcome in order to expand its applicability, and discuss the relevance of personalized medicine to the more widespread challenges being faced in drug discovery and development. We then review some of (i) the key data resources available for use in model development and (ii) the potential areas where advances made within the physiome modelling community could contribute to physiologically based pharmacokinetic and physiologically based pharmacokinetic/pharmacodynamic modelling in support of personalized drug development. We conclude by proposing a roadmap to further guide the physiome community in its on-going efforts to improve data usability, and integration with modelling efforts in the support of personalized medicine development.

Enabling personalized cancer medicine decisions: The challenging pharmacological approach of PBPK models for nanomedicine and pharmacogenomics (Review)

The existing tumor heterogeneity and the complexity of cancer cell biology critically demand powerful translational tools with which to support interdisciplinary efforts aiming to advance personalized cancer medicine decisions in drug development and clinical practice. The development of physiologically based pharmacokinetic (PBPK) models to predict the effects of drugs in the body facilitates the clinical translation of genomic knowledge and the implementation of in vivo pharmacology experience with pharmacogenomics. Such a direction unequivocally empowers our capacity to also make personalized drug dosage scheme decisions for drugs, including molecularly targeted agents and innovative nanoformulations, i.e. in establishing pharmacotyping in prescription. In this way, the applicability of PBPK models to guide individualized cancer therapeutic decisions of broad clinical utility in nanomedicine in real-time and in a cost-affordable manner will be discussed. The latter will be presented by emphasizing the need for combined efforts within the scientific borderlines of genomics with nanotechnology to ensure major benefits and productivity for nanomedicine and personalized medicine interventions.

Anesthesia and Monitoring in Small Laboratory Mammals Used in Anesthesiology, Respiratory and Critical Care Research: A Systematic Review on the Current Reporting in Top-10 Impact Factor Ranked Journals

RATIONALE

This study aimed to investigate the quality of reporting of anesthesia and euthanasia in experimental studies in small laboratory mammals published in the top ten impact factor journals.

METHODS

A descriptive systematic review was conducted and data was abstracted from the ten highest ranked journals with respect to impact factor in the categories 'Anesthesiology', 'Critical Care Medicine' and 'Respiratory System' as defined by the 2012 Journal Citation Reports. Inclusion criteria according to PICOS criteria were as follows: 1) population: small laboratory mammals; 2) intervention: any form of anesthesia and/or euthanasia; 3) comparison: not specified; 4) primary outcome: type of anesthesia, anesthetic agents and type of euthanasia; secondary outcome: animal characteristics, monitoring, mechanical ventilation, fluid management, postoperative pain therapy, animal care approval, sample size calculation and performed interventions; 5) study: experimental studies. Anesthesia, euthanasia, and monitoring were analyzed per performed intervention in each article.

RESULTS

The search yielded 845 articles with 1,041 interventions of interest. Throughout the manuscripts we found poor quality and frequency of reporting with respect to completeness of data on animal characteristics as well as euthanasia, while anesthesia (732/1041, 70.3%) and interventions without survival (970/1041, 93.2%) per se were frequently reported. Premedication and neuromuscular blocking agents were reported in 169/732 (23.1%) and 38/732 (5.2%) interventions, respectively. Frequency of reporting of analgesia during (117/610, 19.1%) and after painful procedures (38/364, 10.4%) was low. Euthanasia practice was reported as anesthesia (348/501, 69%), transcardial perfusion (37/501, 8%), carbon dioxide (26/501, 6%), decapitation (22/501, 5%), exsanguination (23/501, 5%), other (25/501, 5%) and not specified (20/501, 4%, respectively.

CONCLUSIONS

The present systematic review revealed insufficient reporting of anesthesia and euthanasia methods throughout experimental studies in small laboratory mammals. Specific guidelines for anesthesia and euthanasia regimens should be considered to achieve comparability, quality of animal experiments and animal welfare. These measures are of special interest when translating experimental findings to future clinical applications.

An introduction to systems toxicology

Systems toxicology combines novel and historical experimental data to generate increasingly complex models of the biological response to chemical exposure.

Rationalizing underprediction of drug clearance from enzyme and transporter kinetic data: from in vitro tools to mechanistic modeling

Over the years, there has been an increase in the number and quality of available in vitro tools for the assessment of clearance. Complexity of data analysis and modelling of corresponding in vitro data has increased in an analogous manner, in particular for the simultaneous characterization of transporter and metabolism kinetics, together with intracellular binding and passive diffusion. In the current chapter, the impact of different factors on the in vitro-in vivo extrapolation of clearance will be addressed in a stepwise manner, from the selection of the most adequate in vitro system and experimental design/condition to the corresponding modelling of data generated. The application of static or physiologically based pharmacokinetic models in the prediction of clearance will be discussed, highlighting limitations and current challenges of some of the approaches. Particular focus will be on the ability of in vitro and in silico predictive tools to overcome the trend of clearance underprediction. Improvements made as a result of inclusion of extrahepatic metabolism and consideration of transporter-metabolism interplay across different organs will be discussed.

Challenges of using in vitro data for modeling P-glycoprotein efflux in the blood-brain barrier

The efficacy of central nervous system (CNS) drugs may be limited by their poor ability to cross the bloodbrain barrier (BBB). Transporters, such as p-glycoprotein, may affect the distribution of many drugs into the CNS in conjunction with the restricted paracellular pathway of the BBB. It is therefore important to gain information on unbound drug concentrations in the brain in drug development to ensure sufficient drug exposure from plasma at the target site in the CNS. In vitro methods are routinely used in drug development to study passive permeability and p-glycoprotein efflux of new drugs. This review discusses the challenges in the use of in vitro data as input parameters in physiologically based pharmacokinetic (PBPK) models of CNS drug disposition of p-glycoprotein substrates. Experience with quinidine demonstrates the variability in in vitro parameters of passive permeability and active pglycoprotein efflux. Further work is needed to generate parameter values that are independent of the model and assay. This is a prerequisite for reliable predictions of drug concentrations in the brain in vivo.