Matrix loading: assembly of extracellular matrix collagen fibrils during embryogenesis

Neuroprotective Effects of VEGF-A Nanofiber Membrane and FAAH Inhibitor URB597 Against Oxygen-Glucose Deprivation-Induced Ischemic Neuronal Injury

INTRODUCTION

Brain ischemia is a common neurological disorder worldwide that activates a cascade of pathophysiological events involving decreases in oxygen and glucose levels. Despite substantial efforts to explore its pathogenesis, the management of ischemic neuronal injury remains an enormous challenge. Accumulating evidence suggests that VEGF modified nanofiber (NF) materials and the fatty-acid amide hydrolase (FAAH) inhibitor URB597 exert an influence on alleviating ischemic brain damage. We aimed to further investigate their effects on primary hippocampal neurons, as well as the underlying mechanisms following oxygen-glucose deprivation (OGD).

METHODS

Different layers of VEGF-A loaded polycaprolactone (PCL) nanofibrous membranes were first synthesized by using layer-by-layer (LBL) self-assembly of electrospinning methods. The physicochemical and biological properties of VEGF-A NF membranes, and their morphology, hydrophilicity, and controlled-release of VEGF-A were then estimated. Furthermore, the effects of VEGF-A NF and URB597 on OGD-induced mitochondrial oxidative stress, inflammatory responses, neuronal apoptosis, and endocannabinoid signaling components were assessed.

RESULTS

The VEGF-A NF membrane and URB597 can not only promote hippocampal neuron adhesion and viability following OGD but also exhibited antioxidant/anti-inflammatory and mitochondrial membrane potential protection. The VEGF-A NF membrane and URB597 also inhibited OGD-induced cellular apoptosis through activating CB1R signaling. These results indicate that VEGF-A could be controlled-released by LBL self-assembled NF membranes.

DISCUSSION

The VEGF-A NF membrane and URB597 displayed positive synergistic neuroprotective effects through the inhibition of mitochondrial oxidative stress and activation of CB1R/PI3K/AKT/BDNF signaling, suggesting that a VEGF-A loaded NF membrane and the FAAH inhibitor URB597 could be of therapeutic value in ischemic cerebrovascular diseases.

Fabrication of chitosan-based electrospun nanofiber scaffold: Amplification of biomechanical properties, structural stability, and seeded cell viability

The cell scaffolds should structurally be manufactured similar to the target tissue's extracellular matrix. This property should be maintained until cell differentiation. For this purpose, in the current study, electrospun nanofiber (EN) of chitosan (Ch)/polyvinyl alcohol (PVA), as a tissue-friend scaffold, was fabricated by electrospinning in different formulations and borax was utilized as an innovative cross-linking agent to up-regulate the structural and biomechanical properties. The weight loss, water absorbability, structural stability, tensile strength and biocompatibility of borax-included and non-included ENs were compared. The finest morphology, weight loss, water absorbability, structural stability in an aqueous environment, tensile strength and cell viability were found in the borax-included EN containing Ch50.00%v/PVA50.00%v. Moreover, The ENs exhibited appropriate antibacterial properties against Gram-positive and Gram-negative bacteria. In conclusion, borax can be used to improve the mechanical and biocompatibility features of the Ch/PVA-based ENs. Furthermore, it could be suggested that borax-included Ch/PVA ENs can exhibit high appropriate biological properties, candidate them as an appropriate scaffold in the field of tissue engineering. However, in vivo trials are needed to clearly their side effects and advantages.

Coaxial Electrospun Nanofibers with Different Shell Contents to Control Cell Adhesion and Viability

Electrospun nanofibers are widely employed as cell culture matrices because their biomimetic structures resemble a natural extracellular matrix. However, due to the limited cell infiltration into nanofibers, three-dimensional (3D) construction of a cell matrix is not easily accomplished. In this study, we developed a method for the partial digestion of a nanofiber into fragmented nanofibers composed of gelatin and polycaprolactone (PCL). The PCL shells of the coaxial fragments were subsequently removed with different concentrations of chloroform to control the remaining PCL on the shell. The swelling and exposure of the gelatin core were manipulated by the remaining PCL shells. When cells were cultivated with the fragmented nanofibers, they were spontaneously assembled on the cell sheets. The cell adhesion and proliferation were significantly affected by the amount of PCL shells on the fragmented nanofibers.

Biomimetic Aspects of Restorative Dentistry Biomaterials

Biomimetic has emerged as a multi-disciplinary science in several biomedical subjects in recent decades, including biomaterials and dentistry. In restorative dentistry, biomimetic approaches have been applied for a range of applications, such as restoring tooth defects using bioinspired peptides to achieve remineralization, bioactive and biomimetic biomaterials, and tissue engineering for regeneration. Advancements in the modern adhesive restorative materials, understanding of biomaterial-tissue interaction at the nano and microscale further enhanced the restorative materials' properties (such as color, morphology, and strength) to mimic natural teeth. In addition, the tissue-engineering approaches resulted in regeneration of lost or damaged dental tissues mimicking their natural counterpart. The aim of the present article is to review various biomimetic approaches used to replace lost or damaged dental tissues using restorative biomaterials and tissue-engineering techniques. In addition, tooth structure, and various biomimetic properties of dental restorative materials and tissue-engineering scaffold materials, are discussed.

Biological perspectives and current biofabrication strategies in osteochondral tissue engineering

Articular cartilage and the underlying subchondral bone are crucial in human movement and when damaged through disease or trauma impacts severely on quality of life. Cartilage has a limited regenerative capacity due to its avascular composition and current therapeutic interventions have limited efficacy. With a rapidly ageing population globally, the numbers of patients requiring therapy for osteochondral disorders is rising, leading to increasing pressures on healthcare systems. Research into novel therapies using tissue engineering has become a priority. However, rational design of biomimetic and clinically effective tissue constructs requires basic understanding of osteochondral biological composition, structure, and mechanical properties. Furthermore, consideration of material design, scaffold architecture, and biofabrication strategies, is needed to assist in the development of tissue engineering therapies enabling successful translation into the clinical arena. This review provides a starting point for any researcher investigating tissue engineering for osteochondral applications. An overview of biological properties of osteochondral tissue, current clinical practices, the role of tissue engineering and biofabrication, and key challenges associated with new treatments is provided. Developing precisely engineered tissue constructs with mechanical and phenotypic stability is the goal. Future work should focus on multi-stimulatory environments, long-term studies to determine phenotypic alterations and tissue formation, and the development of novel bioreactor systems that can more accurately resemble the in vivo environment.

Desert hedgehog-primary cilia cross talk shapes mitral valve tissue by organizing smooth muscle actin

Non-syndromic mitral valve prolapse (MVP) is the most common heart valve disease affecting 2.4% of the population. Recent studies have identified genetic defects in primary cilia as causative to MVP, although the mechanism of their action is currently unknown. Using a series of gene inactivation approaches, we define a paracrine mechanism by which endocardially-expressed Desert Hedgehog (DHH) activates primary cilia signaling on neighboring valve interstitial cells. High-resolution imaging and functional assays show that DHH de-represses smoothened at the primary cilia, resulting in kinase activation of RAC1 through the RAC1-GEF, TIAM1. Activation of this non-canonical hedgehog pathway stimulates α-smooth actin organization and ECM remodeling. Genetic or pharmacological perturbation of this pathway results in enlarged valves that progress to a myxomatous phenotype, similar to valves seen in MVP patients. These data identify a potential molecular origin for MVP as well as establish a paracrine DHH-primary cilium cross-talk mechanism that is likely applicable across developmental tissue types.

Nano-scale modification of titanium implant surfaces to enhance osseointegration

The main aim of this review study was to report the state of art on the nano-scale technological advancements of titanium implant surfaces to enhance the osseointegration process. Several methods of surface modification are chronologically described bridging ordinary methods (e.g. grit blasting and etching) and advanced physicochemical approaches such as 3D-laser texturing and biomimetic modification. Functionalization procedures by using proteins, peptides, and bioactive ceramics have provided an enhancement in wettability and bioactivity of implant surfaces. Furthermore, recent findings have revealed a combined beneficial effect of micro- and nano-scale modification and biomimetic functionalization of titanium surfaces. However, some technological developments of implant surfaces are not commercially available yet due to costs and a lack of clinical validation for such recent surfaces. Further in vitro and in vivo studies are required to endorse the use of enhanced biomimetic implant surfaces. STATEMENT OF SIGNIFICANCE: Grit-blasting followed by acid-etching is currently used for titanium implant modifications, although recent technological biomimetic physicochemical methods have revealed enhanced osteoconductive and anti-microbial outcomes. An improvement in wettability and bioactivity of titanium implant surfaces has been accomplished by combining micro and nano-scale modification and functionalization with protein, peptides, and bioactive compounds. Such morphological and chemical modification of the titanium surfaces induce the migration and differentiation of osteogenic cells followed by an enhancement of the mineral matrix formation that accelerate the osseointegration process. Additionally, the incorporation of bioactive molecules into the nanostructured surfaces is a promising strategy to avoid early and late implant failures induced by the biofilm accumulation.

Influence of Nanofiber Orientation on Morphological and Mechanical Properties of Electrospun Chitosan Mats

This work explored the use of chitosan (Cs) and poly(ethylene oxide) (PEO) blends for the fabrication of electrospun fiber-orientated meshes potentially suitable for engineering fiber-reinforced soft tissues such as tendons, ligaments, or meniscus. To mimic the fiber alignment present in native tissue, the CS/PEO blend solution was electrospun using a traditional static plate, a rotating drum collector, and a rotating disk collector to get, respectively, random, parallel, circumferential-oriented fibers. The effects of the different orientations (parallel or circumferential) and high-speed rotating collector influenced fiber morphology, leading to a reduction in nanofiber diameters and an improvement in mechanical properties.

Articular cartilage: from formation to tissue engineering

Hyaline cartilage is the nonlinear, inhomogeneous, anisotropic, poro-viscoelastic connective tissue that serves as friction-reducing and load-bearing cushion in synovial joints and is vital for mammalian skeletal movements. Due to its avascular nature, low cell density, low proliferative activity and the tendency of chondrocytes to de-differentiate, cartilage cannot regenerate after injury, wear and tear, or degeneration through common diseases such as osteoarthritis. Therefore severe damage usually requires surgical intervention. Current clinical strategies to generate new tissue include debridement, microfracture, autologous chondrocyte transplantation, and mosaicplasty. While articular cartilage was predicted to be one of the first tissues to be successfully engineered, it proved to be challenging to reproduce the complex architecture and biomechanical properties of the native tissue. Despite significant research efforts, only a limited number of studies have evolved up to the clinical trial stage. This review article summarizes the current state of cartilage tissue engineering in the context of relevant biological aspects, such as the formation and growth of hyaline cartilage, its composition, structure and biomechanical properties. Special attention is given to materials development, scaffold designs, fabrication methods, and template-cell interactions, which are of great importance to the structure and functionality of the engineered tissue.

Biomechanics of Cardiac Function

The heart pumps blood to maintain circulation and ensure the delivery of oxygenated blood to all the organs of the body. Mechanics play a critical role in governing and regulating heart function under both normal and pathological conditions. Biological processes and mechanical stress are coupled together in regulating myocyte function and extracellular matrix structure thus controlling heart function. Here, we offer a brief introduction to the biomechanics of left ventricular function and then summarize recent progress in the study of the effects of mechanical stress on ventricular wall remodeling and cardiac function as well as the effects of wall mechanical properties on cardiac function in normal and dysfunctional hearts. Various mechanical models to determine wall stress and cardiac function in normal and diseased hearts with both systolic and diastolic dysfunction are discussed. The results of these studies have enhanced our understanding of the biomechanical mechanism in the development and remodeling of normal and dysfunctional hearts. Biomechanics provide a tool to understand the mechanism of left ventricular remodeling in diastolic and systolic dysfunction and guidance in designing and developing new treatments.

A three-dimensional computational model of collagen network mechanics

Extracellular matrix (ECM) strongly influences cellular behaviors, including cell proliferation, adhesion, and particularly migration. In cancer, the rigidity of the stromal collagen environment is thought to control tumor aggressiveness, and collagen alignment has been linked to tumor cell invasion. While the mechanical properties of collagen at both the single fiber scale and the bulk gel scale are quite well studied, how the fiber network responds to local stress or deformation, both structurally and mechanically, is poorly understood. This intermediate scale knowledge is important to understanding cell-ECM interactions and is the focus of this study. We have developed a three-dimensional elastic collagen fiber network model (bead-and-spring model) and studied fiber network behaviors for various biophysical conditions: collagen density, crosslinker strength, crosslinker density, and fiber orientation (random vs. prealigned). We found the best-fit crosslinker parameter values using shear simulation tests in a small strain region. Using this calibrated collagen model, we simulated both shear and tensile tests in a large linear strain region for different network geometry conditions. The results suggest that network geometry is a key determinant of the mechanical properties of the fiber network. We further demonstrated how the fiber network structure and mechanics evolves with a local formation, mimicking the effect of pulling by a pseudopod during cell migration. Our computational fiber network model is a step toward a full biomechanical model of cellular behaviors in various ECM conditions.

Mechanobiology and developmental control

Morphogenesis is the remarkable process by which cells self-assemble into complex tissues and organs that exhibit specialized form and function during embryological development. Many of the genes and chemical cues that mediate tissue and organ formation have been identified; however, these signals alone are not sufficient to explain how tissues and organs are constructed that exhibit their unique material properties and three-dimensional forms. Here, we review work that has revealed the central role that physical forces and extracellular matrix mechanics play in the control of cell fate switching, pattern formation, and tissue development in the embryo and how these same mechanical signals contribute to tissue homeostasis and developmental control throughout adult life.

Tenascin-X, collagen, and Ehlers-Danlos syndrome: tenascin-X gene defects can protect against adverse cardiovascular events

Long thought to be two separate syndromes, Ehlers-Danlos syndrome hypermobility type (EDS-HT) and benign joint hypermobility syndrome (BJHS) appear on close examination to represent the same syndrome, with virtually identical clinical manifestations. While both EDS-HT and BJHS were long thought to lack the genetic loci of other connective tissue disorders, including all other types of EDS, researchers have discovered a genetic locus that accounts for manifestations of both EDS-HT and BJHS in a small population of patients. However, given the modest sample size of these studies and the strong correlation between serum levels of tenascin-X with clinical symptoms of both EDS-HT and BJHS, strong evidence exists for the origins of both types of hypermobility originating in haploinsufficiency or deficiency of the gene TNXB, responsible for tenascin-X. Tenascin-X regulates both the structure and stability of elastic fibers and organizes collagen fibrils in the extra-cellular matrix (ECM), impacting the rigidity or elasticity of virtually every cell in the body. While the impacts of tenascin-X insufficiency or deficiency on the skin and joints have received some attention, its potential cardiovascular impacts remain relatively unexplored. Here we set forth two novel hypotheses. First, TNXB haploinsufficiency or deficiency causes the range of clinical manifestations long identified with both EDS-HT and BJHS. And, second, that haploinsufficiency or deficiency of TNXB may provide some benefits against adverse cardiovascular events, including heart attack and stroke, by lowering levels of arterial stiffness associated with aging, as well as by enhancing accommodation of accrued atherosclerotic plaques. This two-fold hypothesis provides insights into the mechanisms underlying the syndromes previous identified with joint hypermobility, at the same time the hypothesis also sheds light on the role of the composition of the extracellular matrix and its impacts on endothelial sheer stress in adverse cardiovascular events.

Col-F, a fluorescent probe for ex vivo confocal imaging of collagen and elastin in animal tissues

A new low-molecular-weight fluorescent probe, Col-F, that exhibits affinity to collagen and elastin, was used successfully in imaging of extracellular matrix in freshly excised animal tissues. Col-F readily penetrates between live cells into tissues and binds to fibers of collagen and elastin by a noncovalent mechanism. Fibers of collagen and elastin have been stained in a variety of tissues, including tendon, skeletal muscle, connective tissue, and arteries. Cells migrating in a Col-F-stained collagenous biomaterial were also imaged. No phototoxic effects were detected when live keratocytes were imaged in the in vitro culture in the presence of Col-F. In conclusion, Col-F provides a simple and convenient tool for fluorescence three-dimensional imaging of intricate collagenous and elastic structures in live and fixed animal tissues, as well as in collagen-containing biomaterials.

Plasminogen activator inhibitor-1 (PAI-1) expression in relation to hypoxia and oncoproteins in clinical cervical tumors

PURPOSE

Explore the role of plasminogen activator inhibitor-1 (PAI-1) in cervical cancer and its relationship to hypoxia and the expression of p53, Ku70/80, and cyclin D1.

MATERIAL AND METHODS

The expression of PAI-1, cyclin D1, and p53, together with tumor oxygenation, were determined in 43 consecutive patients suffering from localized cervical carcinoma. Oncoprotein expression was determined by immunohistochemistry. Tumor oxygenation was measured using a polarographic probe system, "pO2 histography."

RESULTS

PAI expression was considered negative in 32.6% and overexpressed in 18.6% of cases. Cyclin D1 showed a median expression of 5.0 (range 0-70). We observed a positive association between PAI expression and altered p53 (p = 0.049) and cyclin D1 (p = 0.020). An inverse association was detected between PAI and Ku70/80 expression (p = 0.042). Cyclin D1 staining increased according to tumor volume (r = 0.314, p = 0.009). We did not observe a significant association between PAI and hypoxia or other clinicopathological parameters.

CONCLUSION

The present results show that PAI-1 overexpression is associated with nonhomologous end-joining DNA repair down-regulation (low Ku70/80 expression) and with increased p53 and cyclin D1 expression, and they suggest that PAI-1 plays a role in the tumor behavior in cervical carcinoma.

Collagen for bone tissue regeneration

In the last decades, increased knowledge about the organization, structure and properties of collagen (particularly concerning interactions between cells and collagen-based materials) has inspired scientists and engineers to design innovative collagen-based biomaterials and to develop novel tissue-engineering products. The design of resorbable collagen-based medical implants requires understanding the tissue/organ anatomy and biological function as well as the role of collagen's physicochemical properties and structure in tissue/organ regeneration. Bone is a complex tissue that plays a critical role in diverse metabolic processes mediated by calcium delivery as well as in hematopoiesis whilst maintaining skeleton strength. A wide variety of collagen-based scaffolds have been proposed for different tissue engineering applications. These scaffolds are designed to promote a biological response, such as cell interaction, and to work as artificial biomimetic extracellular matrices that guide tissue regeneration. This paper critically reviews the current understanding of the complex hierarchical structure and properties of native collagen molecules, and describes the scientific challenge of manufacturing collagen-based materials with suitable properties and shapes for specific biomedical applications, with special emphasis on bone tissue engineering. The analysis of the state of the art in the field reveals the presence of innovative techniques for scaffold and material manufacturing that are currently opening the way to the preparation of biomimetic substrates that modulate cell interaction for improved substitution, restoration, retention or enhancement of bone tissue function.

Molecular crowding of collagen: a pathway to produce highly-organized collagenous structures

Collagen in vertebrate animals is often arranged in alternating lamellae or in bundles of aligned fibrils which are designed to withstand in vivo mechanical loads. The formation of these organized structures is thought to result from a complex, large-area integration of individual cell motion and locally-controlled synthesis of fibrillar arrays via cell-surface fibripositors (direct matrix printing). The difficulty of reproducing such a process in vitro has prevented tissue engineers from constructing clinically useful load-bearing connective tissue directly from collagen. However, we and others have taken the view that long-range organizational information is potentially encoded into the structure of the collagen molecule itself, allowing the control of fibril organization to extend far from cell (or bounding) surfaces. We here demonstrate a simple, fast, cell-free method capable of producing highly-organized, anistropic collagen fibrillar lamellae de novo which persist over relatively long-distances (tens to hundreds of microns). Our approach to nanoscale organizational control takes advantage of the intrinsic physiochemical properties of collagen molecules by inducing collagen association through molecular crowding and geometric confinement. To mimic biological tissues which comprise planar, aligned collagen lamellae (e.g. cornea, lamellar bone or annulus fibrosus), type I collagen was confined to a thin, planar geometry, concentrated through molecular crowding and polymerized. The resulting fibrillar lamellae show a striking resemblance to native load-bearing lamellae in that the fibrils are small, generally aligned in the plane of the confining space and change direction en masse throughout the thickness of the construct. The process of organizational control is consistent with embryonic development where the bounded planar cell sheets produced by fibroblasts suggest a similar confinement/concentration strategy. Such a simple approach to nanoscale organizational control of structure not only makes de novo tissue engineering a possibility, but also suggests a clearer pathway to organization for fibroblasts than direct matrix printing.

Highly sensitive single-fibril erosion assay demonstrates mechanochemical switch in native collagen fibrils

It has been established that the enzyme susceptibility of collagen, the predominant load-bearing protein in vertebrates, is altered by applied tension. However, whether tensile force increases or decreases the susceptibility to enzyme is a matter of contention. It is critical to establish a definitive understanding of the direction and magnitude of the force versus catalysis rate (k C ) relationship if we are to properly interpret connective tissue development, growth, remodeling, repair, and degeneration. In this investigation, we examine collagen/enzyme mechanochemistry at the smallest scale structurally relevant to connective tissue: the native collagen fibril. A single-fibril mechanochemical erosion assay with nN force resolution was developed which permits detection of the loss of a few layers of monomer from the fibril surface. Native type I fibrils (bovine) held at three levels of tension were exposed to Clostridium histolyticum collagenase A. Fibrils held at zero-load failed rapidly and consistently (20 min) while fibrils at 1.8 pN/monomer failed more slowly (35-55 min). Strikingly, fibrils at 23.9 pN/monomer did not exhibit detectable degradation. The extracted force versus k C data were combined with previous single-molecule results to produce a "master curve" which suggests that collagen degradation is governed by an extremely sensitive mechanochemical switch.

Atrioventricular valve development: new perspectives on an old theme

Atrioventricular valve development commences with an EMT event whereby endocardial cells transform into mesenchyme. The molecular events that induce this phenotypic change are well understood and include many growth factors, signaling components, and transcription factors. Besides their clear importance in valve development, the role of these transformed mesenchyme and the function they serve in the developing prevalve leaflets is less understood. Indeed, we know that these cells migrate, but how and why do they migrate? We also know that they undergo a transition to a mature, committed cell, largely defined as an interstitial fibroblast due to their ability to secrete various matrix components including collagen type I. However, we have yet to uncover mechanisms by which the matrix is synthesized, how it is secreted, and how it is organized. As valve disease is largely characterized by altered cell number, cell activation, and matrix disorganization, answering questions of how the valves are built will likely provide us with information of real clinical relevance. Although expression profiling and descriptive or correlative analyses are insightful, to advance the field, we must now move past the simplicity of these assays and ask fundamental, mechanistic based questions aimed at understanding how valves are "built". Herein we review current understandings of atrioventricular valve development and present what is known and what isn't known. In most cases, basic, biological questions and hypotheses that were presented decades ago on valve development still are yet to be answered but likely hold keys to uncovering new discoveries with relevance to both embryonic development and the developmental basis of adult heart valve diseases. Thus, the goal of this review is to remind us of these questions and provide new perspectives on an old theme of valve development.

Roles of collagen and periostin expression by cranial neural crest cells during soft palate development

The tissue in the palatal region can be divided into the hard and the soft palates, each having a specialized function such as occlusion, speech, or swallowing. Therefore, an understanding of the mechanism of palatogenesis in relation to the function of each region is important. However, in comparison with the hard palate, there is still a lack of information about the mechanisms of soft palate development. In this study, the authors investigated the contribution of cranial neural crest (CNC) cells to development of both hard and soft palates. They also demonstrated a unique pattern of periostin expression during soft palate development, which was closely related to that of collagen type I (Col I) in palatine aponeurosis. Furthermore, organ culture analysis showed that exogenous transforming growth factor-β (TGF-β) induced the expression of both periostin and Col I. These novel patterns of expression in the extracellular matrix (ECM) induced by CNC cells suggest that these cells may help to determine the character of both the hard and soft palates through ECM induction. TGF-β signaling appears to be one of the mediators of Col I and periostin expression in the formation of functional structures during soft palate development.

Computer-designed nano-fibrous scaffolds

Nano-fibrous scaffolding mimics aspects of the extracellular matrix to improve cell function and tissue formation. Although several methods exist to fabricate nano-fibrous scaffolds, the combination of phase separation with reverse solid freeform fabrication (SFF) allows for scaffolds with features at three different orders of magnitude to be formed, which is not easily achieved with other nano-fiber fabrication methods. This technique allows for the external shape and internal pore structure to be precisely controlled in an easily repeatable manner, while the nano-fibrous wall architecture facilitates cellular attachment, proliferation, and differentiation of the cells. In this chapter, we examine the fabrication of computer-designed nano-fibrous scaffolds utilizing thermally induced phase separation and reverse SFF, and the benefits of such scaffolds over more traditional tissue engineering scaffolds on cellular function and tissue regeneration.

Biomimetic nanofibrous scaffolds for bone tissue engineering

Bone tissue engineering is a highly interdisciplinary field that seeks to tackle the most challenging bone-related clinical issues. The major components of bone tissue engineering are the scaffold, cells, and growth factors. This review will focus on the scaffold and recent advancements in developing scaffolds that can mimic the natural extracellular matrix of bone. Specifically, these novel scaffolds mirror the nanofibrous collagen network that comprises the majority of the non-mineral portion of bone matrix. Using two main fabrication techniques, electrospinning and thermally-induced phase separation, and incorporating bone-like minerals, such as hydroxyapatite, composite nanofibrous scaffolds can improve cell adhesion, stem cell differentiation, and tissue formation. This review will cover the two main processing techniques and how they are being applied to fabricate scaffolds for bone tissue engineering. It will then cover how these scaffolds can enhance the osteogenic capabilities of a variety of cell types and survey the ability of the constructs to support the growth of clinically relevant bone tissue.

Extracellular matrix fluctuations during early embryogenesis

Extracellular matrix (ECM) movements and rearrangements were studied in avian embryos during early stages of development. We show that the ECM moves as a composite material, whereby distinct molecular components as well as spatially separated layers exhibit similar displacements. Using scanning wide field and confocal microscopy we show that the velocity field of ECM displacement is smooth in space and that ECM movements are correlated even at locations separated by several hundred micrometers. Velocity vectors, however, strongly fluctuate in time. The autocorrelation time of the velocity fluctuations is less than a minute. Suppression of the fluctuations yields a persistent movement pattern that is shared among embryos at equivalent stages of development. The high resolution of the velocity fields allows a detailed spatio-temporal characterization of important morphogenetic processes, especially tissue dynamics surrounding the embryonic organizer (Hensen's node).

Polymerization and matrix physical properties as important design considerations for soluble collagen formulations

Despite extensive use of type I collagen for research and medical applications, its fibril-forming or polymerization potential has yet to be fully defined and exploited. Here, we describe a type I collagen formulation that is acid solubilized from porcine skin collagen (PSC), quality controlled based upon polymerization potential, and well suited as a platform polymer for preparing three-dimensional (3D) culture systems and injectable/implantable in vivo cellular microenvironments in which both relevant biochemical and biophysical parameters can be precision-controlled. PSC is compared with three commercial collagens in terms of composition and purity as well as polymerization potential, which is described by kinetic parameters and fibril microstructure and mechanical properties of formed matrices. When subjected to identical polymerization conditions, PSC showed significantly decreased polymerization times compared to the other collagens and yielded matrices with the greatest mechanical integrity and broadest range of mechanical properties as characterized in oscillatory shear, uniaxial extension, and unconfined compression. Compositional and intrinsic viscosity analyses suggest that the enhanced polymerization potential of PSC may be attributed to its unique oligomer composition. Collectively, this work demonstrates the importance of standardizing next generation collagen formulations based upon polymerization potential and provides preliminary insight into the contribution of oligomers to collagen polymerization properties.

Development of cell-based immunoassays to measure type I collagen in cultured fibroblasts

Excessive deposition of type I collagen by activated fibroblasts is a hallmark of scarring and fibrotic pathologies. Quantitation of collagen I at the protein level is paramount to measure functionally relevant changes during pathological remodeling of the extracellular matrix. We describe two new cell-based assays to directly quantify the amount of collagen I incorporated into the extracellular matrix of primary human lung fibroblasts. Utilizing a monoclonal antibody specific to native human collagen I, we optimized conditions and parameters including incubation time, specificity and cell density to demonstrate dose-dependent induction of collagen I by transforming growth factor beta, as measured by in-cell enzyme linked immunosorbent assay. The results obtained by this assay were mimicked by an "In situ Quantitative Western Blot" on cultured cells using the same antibody. Results from these assays were comparable to those obtained with a commercial assay for collagen I N-propeptide, which is an index of collagen formation. These assays have been optimized for a 96-well format and provide a novel and useful approach for screening of anti-fibrotic agents in vitro. The assays described here also offer a significant improvement in throughput and specificity over conventional methods that primarily measure soluble collagen.

Nanostructured polymer scaffolds for tissue engineering and regenerative medicine

The structural features of tissue engineering scaffolds affect cell response and must be engineered to support cell adhesion, proliferation and differentiation. The scaffold acts as an interim synthetic extracellular matrix (ECM) that cells interact with prior to forming a new tissue. In this review, bone tissue engineering is used as the primary example for the sake of brevity. We focus on nanofibrous scaffolds and the incorporation of other components including other nanofeatures into the scaffold structure. Since the ECM is comprised in large part of collagen fibers, between 50 and 500 nm in diameter, well-designed nanofibrous scaffolds mimic this structure. Our group has developed a novel thermally induced phase separation (TIPS) process in which a solution of biodegradable polymer is cast into a porous scaffold, resulting in a nanofibrous pore-wall structure. These nanoscale fibers have a diameter (50-500 nm) comparable to those collagen fibers found in the ECM. This process can then be combined with a porogen leaching technique, also developed by our group, to engineer an interconnected pore structure that promotes cell migration and tissue ingrowth in three dimensions. To improve upon efforts to incorporate a ceramic component into polymer scaffolds by mixing, our group has also developed a technique where apatite crystals are grown onto biodegradable polymer scaffolds by soaking them in simulated body fluid (SBF). By changing the polymer used, the concentration of ions in the SBF and by varying the treatment time, the size and distribution of these crystals are varied. Work is currently being done to improve the distribution of these crystals throughout three-dimensional scaffolds and to create nanoscale apatite deposits that better mimic those found in the ECM. In both nanofibrous and composite scaffolds, cell adhesion, proliferation and differentiation improved when compared to control scaffolds. Additionally, composite scaffolds showed a decrease in incidence of apoptosis when compared to polymer control in bone tissue engineering. Nanoparticles have been integrated into the nanostructured scaffolds to deliver biologically active molecules such as growth and differentiation factors to regulate cell behavior for optimal tissue regeneration.

Collagen fibril organization in the pregnant endometrium of decorin-deficient mice

In the pregnant mouse endometrium, collagen fibrillogenesis is characterized by the presence of very thick collagen fibrils which are topographically located exclusively within the decidualized stroma. This dynamic biological process is in part regulated by the small leucine-rich proteoglycans decorin and biglycan. In the present study we utilized wild-type (Dcn(+/+)) and decorin-deficient (Dcn(-/-)) time-pregnant mice to investigate the evolution of non-decidualized and decidualized collagen matrix in the uterine wall of these animals. Ultrastructural and morphometric analyses revealed that the organization of collagen fibrils in the pregnant endometrium of both non-decidualized and decidualized stroma showed a great variability of shape and size, regardless of the genotype. However, the decidualized endometrium from Dcn(-/-) mice contained fibrils with larger diameter and more irregular contours as compared to the wild-type littermates. In the Dcn(-/-) animals, the proportion of thin (10-50 nm) fibrils was also higher as compared to Dcn(+/+) animals. On day 7 of pregnancy, biglycan was similarly localized in the decidualized endometrium in both genotypes. Lumican immunostaining was intense both in decidualized and non-decidualized stroma from Dcn(-/-) animals. The present results support previous findings suggesting that decorin participates in uterine collagen fibrillogenesis. In addition, we suggest that the absence of decorin disturbs the process of lateral assembly of thin fibrils, resulting in very thick collagen fibrils with irregular profiles. Our data further suggest that decorin, biglycan and lumican might play an interactive role in collagen fibrillogenesis in the mouse endometrium, a process modulated according to the stage of pregnancy.

Bone regeneration and neovascularization processes in a pellet culture system for periosteal cells

Reliable bone regeneration can be achieved with a pellet culture system using bovine periosteal cells. However, bone regeneration and neovascularization processes in this system have remained unclear. The present study aimed to clarify the extracellular environment and neovascularization process. To detect components of the extracellular matrix secreted by cells and to identify the conditions necessary for bone regeneration in the body, Western blotting and in vivo tests in nude mice were performed. Cells were cultured with or without ascorbic acid and culture supernatant was precipitated. Western blotting showed that culture supernatant contained collagen type I, procollagen type I, and procollagen type I C-terminus when cells were cultured with ascorbic acid. Cells cultured with ascorbic acid formed partial bony tissues at 2 weeks after grafting to nude mice, while bone formation was missing without ascorbic acid. Immunostaining was performed using species-specific vascular endothelial cell markers to ascertain whether vascular endothelial cells were bovine or murine (nude mouse). Immunohistological methods showed vascular endothelial cells in osseous tissue formed in the subcutaneous tissue of nude mice were murine. Extracellular matrix synthesis in vitro and host blood flow in vivo are essential for bone regeneration.

Dynamic shear-influenced collagen self-assembly

The ability to influence the direction of polymerization of a self-assembling biomolecular system has the potential to generate materials with extremely high anisotropy. In biological systems where highly-oriented cellular populations give rise to aligned and often load-bearing tissue such organized molecular scaffolds could aid in the contact guidance of cells for engineered tissue constructs (e.g. cornea and tendon). In this investigation we examine the detailed dynamics of pepsin-extracted type I bovine collagen assembly on a glass surface under the influence of flow between two plates. Differential Interference Contrast (DIC) imaging (60x-1.4NA) with focal plane stabilization was used to resolve and track the growth of collagen aggregates on borosilicate glass for 4 different shear rates (500, 80, 20, and 9s(-1)). The detailed morphology of the collagen fibrils/aggregates was examined using Quick Freeze Deep Etch (QFDE) electron microscopy. Nucleation of fibrils on the glass was observed to occur rapidly (approximately 2 min) followed by continued growth of the fibrils. The growth rates were dependent on flow in a complex manner with the highest rate of axial growth (0.1 micro/s) occurring at a shear rate of 9s(-1). The lowest growth rate occurred at the highest shear. Fibrils were observed to both branch and join during the experiments. The best alignment of fibrils was observed at intermediate shear rates of 20 and 80s(-1). However, the investigation revealed that fibril directional growth was not stable. At high shear rates, fibrils would often turn downstream forming what we term "hooks" which are likely the combined result of monomer interaction with the initial collagen layer or "mat" and the high shear rate. Further, QFDE examination of fibril morphology demonstrated that the assembled fibrillar structure did not possess native D-periodicity. Instead, fibrils comprised a collection of generally aligned, monomers which were self-assembled to form a fibril-like aggregate. In conclusion, though constant shear-rate clearly influences collagen fibrillar alignment, the formation of highly-organized collagenous arrays of native-like D-banded fibrils remains a challenge. Modulation of shear in combination with surface energy patterning to produce a highly-aligned initial mat may provide significant improvement of both the fibril morphology and alignment.

Role of electrospun fibre diameter and corresponding specific surface area (SSA) on cell attachment

In order to develop scaffolds for tissue regeneration applications, it is important to develop an understanding of the kinetics of cell attachment as a function of scaffold geometry. In the present study, we investigated how the specific surface area of electrospun scaffolds affected cell attachment and spreading. Number of cells attached to the scaffold was measured by the relative intensity of a metabolic dye (MTS) and cell spreading was analysed for individual cells by measuring the area of projected F-actin cytoskeleton. We varied the fibre diameter to obtain a specific surface area distribution in the range 2.24-18.79 microm(-1). In addition, we had one case where the scaffolds had beads in them and therefore had non-uniform fibres. For each of these different geometries, we varied the cell-seeding density (0.5-1 x 10(5)) and the serum concentration (0-12%) over the first 8 h in an electrospun polycaprolactone NIH 3T3 fibroblast system. Cells on beaded scaffolds showed the lowest attachment and almost no F-actin spreading in all experiments indicating uniform fibre diameter is essential for electrospun scaffolds. For the uniform fibre scaffolds, cell attachment was a function of scaffold specific surface area (SSA) (18.79-2.24 microm(-1)) and followed two distinct trends: when scaffold SSA was < 7.13 microm(-1), cell adhesion rate remained largely unchanged; however, for SSA > 7.13 microm(-1) there was a significant increase in cellular attachment rate with increasing SSA. This indicated that nanofibrous scaffolds increased cellular adhesion compared to microfibrous scaffolds. This phenomenon is true for serum concentrations of 7.5% and higher. For 5% and lower serum concentration, cell attachment is low and higher SSA fails to make a significant improvement in cell attachment. When cell attachment was investigated at a single-cell level by measuring the projected actin area, a similar trend was noted where the effect of higher SSA led to higher projected area for cells at 8 h. These results indicate that uniform electrospun scaffolds with SSA provide a faster cell attachment compared to lower SSA and beaded scaffolds. These results indicate that continuous electrospun nanofibrous scaffolds may be a good substrate for rapid tissue regeneration.

New insights into elastic fiber assembly

Elastic fibers provide recoil to tissues that undergo repeated stretch, such as the large arteries and lung. These large extracellular matrix (ECM) structures contain numerous components, and our understanding of elastic fiber assembly is changing as we learn more about the various molecules associated with the assembly process. The main components of elastic fibers are elastin and microfibrils. Elastin makes up the bulk of the mature fiber and is encoded by a single gene. Microfibrils consist mainly of fibrillin, but also contain or associate with proteins such as microfibril associated glycoproteins (MAGPs), fibulins, and EMILIN-1. Microfibrils were thought to facilitate alignment of elastin monomers prior to cross-linking by lysyl oxidase (LOX). We now know that their role, as well as the overall assembly process, is more complex. Elastic fiber formation involves elaborate spatial and temporal regulation of all of the involved proteins and is difficult to recapitulate in adult tissues. This report summarizes the known interactions between elastin and the microfibrillar proteins and their role in elastic fiber assembly based on in vitro studies and evidence from knockout mice. We also propose a model of elastic fiber assembly based on the current data that incorporates interactions between elastin, LOXs, fibulins and the microfibril, as well as the pivotal role played by cells in structuring the final functional fiber.

Tissue Engineering with Nano-Fibrous Scaffolds

Tissue Engineering is a rapidly evolving field in terms of cell source and scaffold fabrication. As the template for three dimensional tissue growth, the scaffold should emulate the native extracellular matrix, which is nano-fibrous. Currently, there are three basic techniques capable of generating nano-fibrous scaffolding: electrospinning, molecular self-assembly, and thermally induced phase separation. These scaffolds can then be further modified by various three dimensional surface modification techniques if necessary to more precisely emulate the native extracellular matrix. However, even without further modification, nano-fibrous scaffolds have been shown to have advantageous effects on cellular behavior and tissue formation when compared to more traditional types of scaffolding. This review focuses on the current state of tissue engineering with nano-fibrous scaffolding with particular emphasis on bone tissue engineering.

Periostin regulates collagen fibrillogenesis and the biomechanical properties of connective tissues

Periostin is predominantly expressed in collagen-rich fibrous connective tissues that are subjected to constant mechanical stresses including: heart valves, tendons, perichondrium, cornea, and the periodontal ligament (PDL). Based on these data we hypothesize that periostin can regulate collagen I fibrillogenesis and thereby affect the biomechanical properties of connective tissues. Immunoprecipitation and immunogold transmission electron microscopy experiments demonstrate that periostin is capable of directly interacting with collagen I. To analyze the potential role of periostin in collagen I fibrillogenesis, gene targeted mice were generated. Transmission electron microscopy and morphometric analyses demonstrated reduced collagen fibril diameters in skin dermis of periostin knockout mice, an indication of aberrant collagen I fibrillogenesis. In addition, differential scanning calorimetry (DSC) demonstrated a lower collagen denaturing temperature in periostin knockout mice, reflecting a reduced level of collagen cross-linking. Functional biomechanical properties of periostin null skin specimens and atrioventricular (AV) valve explant experiments provided direct evidence of the role that periostin plays in regulating the viscoelastic properties of connective tissues. Collectively, these data demonstrate for the first time that periostin can regulate collagen I fibrillogenesis and thereby serves as an important mediator of the biomechanical properties of fibrous connective tissues.

An ultrastructural analysis of collagen in tissue engineered arteries

Collagen is the structural molecule that is most correlated with strength in blood vessels. In this study, we compared the properties of collagen in engineered and native blood vessels. Transmission electron microscopy (TEM) was used to image sections of engineered and native arteries. Band periodicities of engineered and native collagen fibrils indicated that spacing between collagen molecules was similar in engineered and native tissues. Engineered arteries, however, had thinner collagen fibrils and fibers than native arteries. Further, collagen fibrils were more loosely packed within collagen fibers in engineered arteries than in native arteries. The sensitivity of TEM analysis allowed measurement of the relative frequency of observation for alignment of collagen. These observations showed that collagen in both engineered and native arteries was aligned circumferentially, helically, and axially, but that engineered arteries had less circumferential collagen and more axial collagen than native arteries. Given that collagen is primarily responsible for dictating the ultimate mechanical properties of arterial tissue, future efforts should focus on using relative frequency of observation for alignment of collagen as a descriptive input for models of the mechanical properties of engineered or native tissues.

The introduction of an extracellular matrix-based scaffold to the marketplace

Continuous application of new scientific knowledge is a central characteristic of modern medical practice. The current pace of medical innovation creates an environment of rapid change, and the introduction of innovative treatments in the area of regenerative medicine in orthopaedics prompts health care providers, medical device companies, patient advocacy groups, and health insurance payors to study the most optimal method for introducing these treatments to clinical practice. Questions regarding the role and value of preclinical testing, clinical trials, and postmarketing surveillance are pertinent to this discussion, and answers to these questions should culminate in a strategy that benefits patient care.

Macrophages promote collagen fibrillogenesis around terminal end buds of the developing mammary gland

Development of the ductal network in the mammary gland is dependent in part on the presence of macrophages. Here we utilize multi-photon microscopy and second harmonic generation to describe terminal end bud 3-dimensional structure and the organization of the surrounding collagen matrix. We have applied this approach to analyze the effect of macrophage deficiency on terminal end bud structure and collagen organization, using mice homozygous for a null mutation in the colony stimulating factor-1 gene (Csf1op/Csf1op). Primary terminal end buds have an oblong shape, with long collagen I fibers close to the neck of the terminal end bud and radiating upwards in the direction of growth. Around the terminal end buds, the amount of total collagen I detected by antibody staining was not affected by macrophage deficiency. However the amount of collagen I organized into long fibers, detected by second harmonic generation signal, was reduced in Csf1op/Csf1op mice. Macrophage deficiency also caused terminal end buds to be rounder and shorter. These studies reveal a role for macrophages in collagen fibrillogenesis and in organization of the structure of terminal end buds.

Interaction of cells and nanofiber scaffolds in tissue engineering

Nanofibers and nanomaterials are potentially recent additions to materials in relation to tissue engineering (TE). TE is the regeneration of biological tissues through the use of cells, with the aid of supporting structures and biomolecules. Mimicking architecture of extracellular matrix is one of the challenges for TE. Biodegradable biopolymer nanofibers with controlled surface and internal molecular structures can be electrospun into mats with specific fiber arrangement and structural integrity for drug delivery and TE applications. The polymeric materials are widely accepted because of their ease of processability and amenability to provide a large variety of cost-effective materials, which help to enhance the comfort and quality of life in modern biomedical and industrial society. Today, nanotechnology and nanoscience approaches to scaffold design and functionalization are beginning to expand the market for drug delivery and TE is forming the basis for highly profitable niche within the industry. This review describes recent advances for fabrication of nanofiber scaffolds and interaction of cells in TE.

Dynamic compression regulates the expression and synthesis of chondrocyte-specific matrix molecules in bone marrow stromal cells

The overall objective of the present study was to investigate the mechanotransduction of bovine bone marrow stromal cells (BMSCs) through the interactions between transforming growth factor beta1 (TGF-beta1), dexamethasone, and dynamic compressive loading. Overall, the addition of TGF-beta1 increased cell viability, extracellular matrix (ECM) gene expression, matrix synthesis, and sulfated glycosaminoglycan content over basal construct medium. The addition of dexamethasone further enhanced extracellular matrix gene expression and protein synthesis. There was little stimulation of ECM gene expression or matrix synthesis in any medium group by mechanical loading introduced on day 8. In contrast, there was significant stimulation of ECM gene expression and matrix synthesis in chondrogenic media by dynamic loading introduced on day 16. The level of stimulation was also dependent on the medium supplements, with the samples treated with basal medium being the least responsive and the samples treated with TGF-beta1 and dexamethasone being the most responsive at day 16. Both collagen I and collagen II gene expressions were more responsive to dynamic loading than aggrecan gene expression. Dynamic compression upregulated Smad2/3 phosphorylation in samples treated with basal and TGF-beta1 media. These findings suggest that interactions between mechanical stimuli and TGF-beta signaling may be an important mechanotransduction pathway for BMSCs, and they indicate that mechanosensitivity may vary during the process of chondrogenesis.

Prediction of collagen orientation in articular cartilage by a collagen remodeling algorithm

OBJECTIVE

Tissue engineering is a promising method to treat damaged cartilage. So far it has not been possible to create tissue-engineered cartilage with an appropriate structural organization. It is envisaged that cartilage tissue engineering will significantly benefit from knowledge of how the collagen fiber orientation is directed by mechanical conditions. The goal of the present study is to evaluate whether a collagen remodeling algorithm based on mechanical loading can be corroborated by the collagen orientation in healthy cartilage.

METHODS

According to the remodeling algorithm, collagen fibrils align with a preferred fibril direction, situated between the positive principal strain directions. The remodeling algorithm was implemented in an axisymmetric finite element model of the knee joint. Loading as a result of typical daily activities was represented in three different phases: rest, standing and gait.

RESULTS

In the center of the tibial plateau the collagen fibrils run perpendicular to the subchondral bone. Just below the articular surface they bend over to merge with the articular surface. Halfway between the center and the periphery, the collagen fibrils bend over earlier, resulting in a thicker superficial and transitional zones. Near the periphery fibrils in the deep zone run perpendicular to the articular surface and slowly bend over to angles of -45 degrees and +45 degrees with the articular surface.

CONCLUSION

The collagen structure as predicted with the collagen remodeling algorithm corresponds very well with the collagen structure in healthy knee joints. This remodeling algorithm is therefore considered to be a valuable tool for developing loading protocols for tissue engineering of articular cartilage.

Tenascin-X, collagen, elastin, and the Ehlers-Danlos syndrome

Tenascin-X is an extracellular matrix protein initially identified because the gene encoding it overlaps with the human CYP21B gene. Because studies of gene and protein function of other tenascins had been poorly predictive of essential functions in vivo, we used a genetic approach that critically relied on an understanding of the genomic locus to uncover an association between inactivating tenascin-X mutations and novel recessive and dominant forms of Ehlers-Danlos syndrome (EDS). Tenascin-X provides the first example of a gene outside of the fibrillar collagens and their processing enzymes that causes EDS. Tenascin-X null mice recapitulate the skin findings of the human disease, confirming a causative role for this gene in EDS. Further evaluation of these mice showed that tenascin-X is an important regulator of collagen deposition in vivo, suggesting a novel mechanism of disease in this form of EDS. Further studies suggest that tenascin-X may do this through both direct and indirect interactions with the collagen fibril. Recent studies show that TNX effects on matrix extend beyond the collagen to the elastogenic pathway and matrix remodeling enzymes. Tenascin-X serves as a compelling example of how human "experiments of nature" can guide us to an understanding of genes whose function may not be evident from their sequence or in vitro studies of their encoded proteins.

Mechanisms of elongation in embryogenesis

Here, I discuss selected examples of elongation in embryogenesis to identify common and unique mechanisms, useful questions for further work, and new systems that offer opportunities for answering these questions. Fiber-wound, hydraulic mechanisms of elongation highlight the importance of biomechanical linkages of otherwise unrelated cellular behaviors during elongation. Little-studied examples of elongation by cell intercalation offer opportunities to study new aspects of this mode of elongation. Elongation by oriented cell division highlights the problem of mitotic spindle orientation and the maintenance of cell-packing patterns in anisotropic force environments. The balance of internal cell-adhesion and external traction forces emerges as a key issue in the formation of elongate structures from compact ones by directed migration.

Extracellular matrix macroassembly dynamics in early vertebrate embryos

This chapter focuses on the in vivo macroassembly dynamics of fibronectin and fibrillin-2--two prominent extracellular matrix (ECM) components, present in vertebrate embryos at the earliest stages of development. The ECM is an inherently dynamic structure with a well-defined position fate: ECM filaments are not only anchored to and move with established tissue boundaries, but are repositioned prior to the formation of new anatomical features. We distinguish two ECM filament relocation processes-each operating on different length scales. First, ECM filaments are moved by large-scale tissue motion, which rearranges major organ primordia within the embryo. The second type of motion, on the scale of the individual ECM filaments, is driven by local motility and protrusive activity of nearby cells. The motion decomposition is made practically possible by recent advances in microscopy and high-resolution particle image velocimetry algorithms. We demonstrate that both kinds of motion contribute substantially to the establishment of normal ECM structure, and both must be taken into account when attempting to understand ECM macroassembly during embryonic morphogenesis. The tissue-scale motion changes the local amount (density) and the tissue-level structure (e.g., orientation) of ECM fibers. Local reorganization includes filament assembly and the segregation of ECM into specific patterns. Local reorganization takes place most actively at Hensen's node and around the primitive streak. These regions are also sites of active cell migration, where fibrillin-2 and fibronectin are often colocalized in ECM globules, and new fibrillin-2 foci are deposited. During filament assembly, the globular patches of ECM are joined into larger linear structures in a hierarchical process: increasingly larger structures are created by the aggregation of smaller units. A future understanding of ECM assembly thus requires the study of the complex interactions between biochemical assembly steps, local cell action, and tissue motion.

Electrospun chitosan-based nanofibers and their cellular compatibility

Chitosan-based nanofibers with an average fiber diameter controllable from a few microns down to approximately 40 nm and a narrow size distribution were fabricated by electrospinning solutions containing chitosan, polyethylene oxide (PEO), and Triton X-100. Rheological study showed a strong dependence of spinnability and fiber morphology on solution viscosity and thus on chitosan-to-PEO ratio. The nanofibers can be deposited either as a nonwoven mat or as a highly aligned bundle of controllable size. Potential use of this nanofibrous matrix for tissue engineering was studied by examining its integrity in water and cellular compatibility. It was found that the matrix with a chitosan/PEO ratio of 90/10 retained excellent integrity of the fibrous structure in water. Experimental results from cell stain assay and SEM imaging showed that the nanofibrous structure promoted the attachment of human osteoblasts and chondrocytes and maintained characteristic cell morphology and viability throughout the period of study. This nanofibrous matrix is of particular interest in tissue engineering for controlled drug release and tissue remodeling.

Comparison of Matrigel™ and gelatin substrata for feeder-free culture of undifferentiated mouse embryonic stem cells for toxicity testing

Murine embryonic stem (mES) cells have been used to evaluate cytotoxicity and developmental injury following exposure to embryotoxic agents. However, maintaining a homogeneous population of undifferentiated mES cells for this purpose has been complicated by the need for continuous co-culture with murine embryonic fibroblast (mEF) cells or limited passaging on plastic surfaces coated with gelatin. Here, we compare the synthetic basement membrane Matrigel with 0.1% gelatin substratum for feeder-free propagation of undifferentiated mES cells. Biomarkers of pluripotentiality, chromosome number, caspase-3 expression, and cardiomyocyte differentiation were monitored for mES cells cultured on Matrigel or 0.1% gelatin up to passage 7 (P7). Our results suggest that choice of substratum had no significant effect on population doubling time, cell viability, stage-specific embryonic antigen-1 (SSEA-1) expression, or early passage formation of beating cardiomyocytes (all P>or=0.09). In other comparisons, however, Matrigel supported significantly higher synthesis of alkaline phosphatase (7.7x10(-3)+/-0.8 vs 6.6x10(-3)+/-0.8 units/liter/cell, respectively, P=0.012), overall expression of activated caspase-3 following exposure to 5, 10, 50, 100 and 500 parts per billion (ppb) sodium arsenite (P<0.0001), and percent development to beating cardiomyocytes at P7 (P=0.01). Together, our findings suggest that Matrigel shows promise as a substrate for feeder-free propagation of undifferentiated mES cells for embryotoxicity endpoints.

A procollagen C-proteinase inhibitor diminishes collagen and lysyl oxidase processing but not collagen cross-linking in osteoblastic cultures

The deposition of insoluble functional collagen occurs following extracellular proteolytic processing of procollagens by procollagen N- and C-proteinases, fibril formation, and lysyl oxidase dependent cross-linking. Procollagen C-proteinases in addition process and activate lysyl oxidase. The present study evaluates a possible role for procollagen C-proteinases in controlling different aspects of collagen deposition in vitro. Studies determine whether inhibition of procollagen C-proteinase activity with a specific BMP-1 inhibitor results in perturbations in lysyl oxidase activation, and in collagen processing, deposition, and cross-linking in phenotypically normal cultured murine MC3T3-E1 cells. Data show that BMP-1 Inhibitor dose dependently inhibits lysyl oxidase activation by up to 50% in undifferentiated proliferating cells. In differentiating cultures, BMP-1 inhibitor decreased collagen processing but did not inhibit the accumulation of mature collagen cross-links. Finally, electron microscopy studies show that collagen fibril diameter increased. Thus, inhibition of procollagen C-proteinases results in perturbed collagen deposition primarily via decreased collagen processing.