Making the mouse embryo transparent: identifying developmental malformations using magnetic resonance imaging

Visualising the Cardiovascular System of Embryos of Biomedical Model Organisms with High Resolution Episcopic Microscopy (HREM)

The article will briefly introduce the high-resolution episcopic microscopy (HREM) technique and will focus on its potential for researching cardiovascular development and remodelling in embryos of biomedical model organisms. It will demonstrate the capacity of HREM for analysing the cardiovascular system of normally developed and genetically or experimentally malformed zebrafish, frog, chick and mouse embryos in the context of the whole specimen and will exemplarily show the possibilities HREM offers for comprehensive visualisation of the vasculature of adult human skin. Finally, it will provide examples of the successful application of HREM for identifying cardiovascular malformations in genetically altered mouse embryos produced in the deciphering the mechanisms of developmental disorders (DMDD) program.

X-ray phase microtomography with a single grating for high-throughput investigations of biological tissue

The high-throughput 3D visualisation of biological specimens is essential for studying diseases and developmental disorders. It requires imaging methods that deliver high-contrast, high-resolution volumetric information at short sample preparation and acquisition times. Here we show that X-ray phase-contrast tomography using a single grating can provide a powerful alternative to commonly employed techniques, such as high-resolution episcopic microscopy (HREM). We present the phase tomography of a mouse embryo in paraffin obtained with an X-ray single-grating interferometer at I13-2 Beamline at Diamond Light Source and discuss the results in comparison with HREM measurements. The excellent contrast and quantitative density information achieved non-destructively and without staining using a simple, robust setup make X-ray single-grating interferometry an optimum candidate for high-throughput imaging of biological specimens as an alternative for existing methods like HREM.

Phenotyping structural abnormalities in mouse embryos using high-resolution episcopic microscopy

The arrival of simple and reliable methods for 3D imaging of mouse embryos has opened the possibility of analysing normal and abnormal development in a far more systematic and comprehensive manner than has hitherto been possible. This will not only help to extend our understanding of normal tissue and organ development but, by applying the same approach to embryos from genetically modified mouse lines, such imaging studies could also transform our knowledge of gene function in embryogenesis and the aetiology of developmental disorders. The International Mouse Phenotyping Consortium is coordinating efforts to phenotype single gene knockouts covering the entire mouse genome, including characterising developmental defects for those knockout lines that prove to be embryonic lethal. Here, we present a pilot study of 34 such lines, utilising high-resolution episcopic microscopy (HREM) for comprehensive 2D and 3D imaging of homozygous null embryos and their wild-type littermates. We present a simple phenotyping protocol that has been developed to take advantage of the high-resolution images obtained by HREM and that can be used to score tissue and organ abnormalities in a reliable manner. Using this approach with embryos at embryonic day 14.5, we show the wide range of structural abnormalities that are likely to be detected in such studies and the variability in phenotypes between sibling homozygous null embryos.

High-resolution episcopic microscopy (HREM): a tool for visualizing skin biopsies

We evaluate the usefulness of digital volume data produced with the high-resolution episcopic microscopy (HREM) method for visualizing the three-dimensional (3D) arrangement of components of human skin, and present protocols designed for processing skin biopsies for HREM data generation. A total of 328 biopsies collected from normally appearing skin and from a melanocytic nevus were processed. Cuboidal data volumes with side lengths of ~2×3×6 mm3 and voxel sizes of 1.07×1.07×1.5 µm3 were produced. HREM data fit ideally for visualizing the epidermis at large, and for producing highly detailed volume and surface-rendered 3D representations of the dermal and hypodermal components at a structural level. The architecture of the collagen fiber bundles and the spatial distribution of nevus cells can be easily visualized with volume-rendering algorithms. We conclude that HREM has great potential to serve as a routine tool for researching and diagnosing skin pathologies.

Microcomputed tomography provides high accuracy congenital heart disease diagnosis in neonatal and fetal mice

BACKGROUND

Mice are well suited for modeling human congenital heart disease (CHD), given their 4-chamber cardiac anatomy. However, mice with CHD invariably die prenatally/neonatally, causing CHD phenotypes to be missed. Therefore, we investigated the efficacy of noninvasive microcomputed tomography (micro-CT) to screen for CHD in stillborn/fetal mice. These studies were performed using chemically mutagenized mice expected to be enriched for birth defects, including CHD.

METHODS AND RESULTS

Stillborn/fetal mice obtained from the breeding of N-ethyl-N-nitrosourea mutagenized mice were formalin-fixed and stained with iodine, then micro-CT scanned. Those diagnosed with CHD and some CHD-negative pups were necropsied. A subset of these were further analyzed by histopathology to confirm the CHD/no-CHD diagnosis. Micro-CT scanning of 2105 fetal/newborn mice revealed an abundance of ventricular septal defects (n=307). Overall, we observed an accuracy of 89.8% for ventricular septal defect diagnosis. Outflow tract anomalies identified by micro-CT included double outlet right ventricle (n=36), transposition of the great arteries (n=14), and persistent truncus arteriosus (n=3). These were diagnosed with a 97.4% accuracy. Aortic arch anomalies also were readily detected with an overall 99.6% accuracy. This included right aortic arch (n=28) and coarctation/interrupted aortic arch (n=12). Also detected by micro-CT were atrioventricular septal defects (n=22), tricuspid hypoplasia/atresia (n=13), and coronary artery fistulas (n=16). They yielded accuracies of 98.9%, 100%, and 97.8%, respectively.

CONCLUSIONS

Contrast enhanced micro-CT imaging in neonatal/fetal mice can reliably detect a wide spectrum of CHD. We conclude that micro-CT imaging can be used for routine rapid assessments of structural heart defects in fetal/newborn mice.

A DTI tractography analysis of infralimbic and prelimbic connectivity in the mouse using high-throughput MRI

BACKGROUND

High throughput, brain-wide analysis of neural circuit connectivity is needed to understand brain function across species. Combining such tractography techniques with small animal models will allow more rapid integration of systems neuroscience with molecular genetic, behavioral, and cellular approaches.

METHODS

We collected DTI and T2 scans on 3 series of 6 fixed mouse brains ex vivo in a 9.4 Tesla magnet. The DTI analysis of ten mouse brains focused on comparing prelimbic (PL) and Infralimbic (IL) probabilistic tractography. To validate the DTI results a preliminary set of 24 additional mice were injected with BDA into the IL and PL. The DTI results and preliminary BDA results were also compared to previously published rat connectivity.

RESULTS

We focused our analyses on the connectivity of the mouse prelimbic (PL) vs. infralimbic (IL) cortices. We demonstrated that this DTI analysis is consistent across scanned mice, with prior analyses of rat IL/PL connectivity, and with mouse PL and IL projections using the BDA tracer.

CONCLUSIONS

High-throughput ex vivo DTI imaging in the mouse delineated both common and differential connectivity of the IL and PL cortex. The scanning methodology provided a balance of tissue contrast, signal-to-noise ratio, resolution and throughput. Our results are largely consistent with previously published anterograde staining techniques in rats, and the preliminary tracer study of the mouse IL and PL provided here.

Biallelic expression of Tbx1 protects the embryo from developmental defects caused by increased receptor tyrosine kinase signaling

BACKGROUND

22q11.2 deletion syndrome (22q11DS) is the most common microdeletion syndrome in humans, characterized by cardiovascular defects such as interrupted aortic arch, outflow tract defects, thymus and parathyroid hypo- or aplasia, and cleft palate. Heterozygosity of Tbx1, the mouse homolog of the candidate TBX1 gene, results in mild defects dependent on genetic background, whereas complete inactivation results in severe malformations in multiple tissues.

RESULTS

The loss of function of two Sprouty genes, which encode feedback antagonists of receptor tyrosine kinase (RTK) signaling, phenocopy many defects associated with 22q11DS in the mouse. The stepwise reduction of Sprouty gene dosage resulted in different phenotypes emerging at specific steps, suggesting that the threshold up to which a given developmental process can tolerate increased RTK signaling is different. Tbx1 heterozygosity significantly exacerbated the severity of all these defects, which correlated with a substantial increase in RTK signaling.

CONCLUSIONS

Our findings suggest that TBX1 functions as an essential component of a mechanism that protects the embryo against perturbations in RTK signaling that may lead to developmental defects characteristic of 22q11DS. We propose that genetic factors that enhance RTK signaling ought to be considered as potential genetic modifiers of this syndrome.

Segmentation propagation using a 3D embryo atlas for high-throughput MRI phenotyping: comparison and validation with manual segmentation

Effective methods for high-throughput screening and morphometric analysis are crucial for phenotyping the increasing number of mouse mutants that are being generated. Automated segmentation propagation for embryo phenotyping is an emerging application that enables noninvasive and rapid quantification of substructure volumetric data for morphometric analysis. We present a study to assess and validate the accuracy of brain and kidney volumes generated via segmentation propagation in an ex vivo mouse embryo MRI atlas comprising three different groups against the current "gold standard"--manual segmentation. Morphometric assessment showed good agreement between automatically and manually segmented volumes, demonstrating that it is possible to assess volumes for phenotyping a population of embryos using segmentation propagation with the same variation as manual segmentation. As part of this study, we have made our average atlas and segmented volumes freely available to the community for use in mouse embryo phenotyping studies. These MRI datasets and automated methods of analyses will be essential for meeting the challenge of high-throughput, automated embryo phenotyping.

Pathology methods for the evaluation of embryonic and perinatal developmental defects and lethality in genetically engineered mice

The normal embryonic development of organs and other tissues in mice and all species is preprogrammed by genes. Inactivation of a gene involved in any stage of normal embryonic development can have severe consequences leading to embryonic or postnatal developmental defects and lethality. Pathology methods are reviewed for evaluating normal and abnormal placenta and embryo, especially after E12.5. These methods include pathology protocols for necropsy and histopathology in addition to references that will provide additional knowledge for embryo assessment including histology atlases and advanced embryo imaging techniques.

High-resolution episcopic microscopy data-based measurements of the arteries of mouse embryos: evaluation of significance and reproducibility under routine conditions

Defining the role of genes in the genesis of congenital cardiovascular defects involves comparisons of the diameters of arteries measured in wild-type and genetically engineered mouse embryos. This study aims at evaluating the significance and reproducibility of measurements of the diameters of the great intrathoracic arteries of mouse embryos, as produced under routine conditions, by employing a recently suggested measuring method. Using high-resolution episcopic microscopy, we generated digital volume data of 60 mouse embryos (voxel size 1.07 × 1.07 × 2 μm(3)) of developmental stage 23 according to Theiler. We randomly split the 60 data sets into two groups of 30 and assigned each group to a diploma student. In addition, an experienced scientist received 12 randomly selected specimens of each group. Independently, the researchers created three-dimensional models of the intrathoracic arteries and identified comparable measurement positions along the ascending aorta, pulmonary trunk and descending aorta. At each position, they defined virtual resections cutting through the volume data perpendicular to the longitudinal axis of the artery. In the virtual resections, the researchers measured the perimeter of the lumen of the artery. The diameter was calculated from the perimeter. Then, we performed statistic comparisons of the diameters measured in micrometres and of the ratio of each measured diameter and the diameter of the ascending aorta. Comparisons of the ratios did not reveal statistically significant differences between the measurements created by the different scientists. We assume that the used measuring protocol is highly robust and produces reproducible and significant results under routine conditions.

Episcopic 3D Imaging Methods: Tools for Researching Gene Function

This work aims at describing episcopic 3D imaging methods and at discussing how these methods can contribute to researching the genetic mechanisms driving embryogenesis and tissue remodelling, and the genesis of pathologies. Several episcopic 3D imaging methods exist. The most advanced are capable of generating high-resolution volume data (voxel sizes from 0.5x0.5x1 µm upwards) of small to large embryos of model organisms and tissue samples. Beside anatomy and tissue architecture, gene expression and gene product patterns can be three dimensionally analyzed in their precise anatomical and histological context with the aid of whole mount in situ hybridization or whole mount immunohistochemical staining techniques. Episcopic 3D imaging techniques were and are employed for analyzing the precise morphological phenotype of experimentally malformed, randomly produced, or genetically engineered embryos of biomedical model organisms. It has been shown that episcopic 3D imaging also fits for describing the spatial distribution of genes and gene products during embryogenesis, and that it can be used for analyzing tissue samples of adult model animals and humans. The latter offers the possibility to use episcopic 3D imaging techniques for researching the causality and treatment of pathologies or for staging cancer. Such applications, however, are not yet routine and currently only preliminary results are available. We conclude that, although episcopic 3D imaging is in its very beginnings, it represents an upcoming methodology, which in short terms will become an indispensable tool for researching the genetic regulation of embryo development as well as the genesis of malformations and diseases.

Microscopic magnetic resonance imaging of the thoracic venous system in rats with congenital diaphragmatic hernia

BACKGROUND/AIM

Infants and rats with congenital diaphragmatic hernia (CDH) have malformations of the heart and the great arteries caused by neural crest (NC) dysregulation during embryogenesis. Abnormally narrow jugular veins have been found in babies during cannulation for ECMO. However, the venous system has not been examined in depth so far. We hypothesized that abnormal patterning and/or size of the thoracic veins could occur in rats with CDH. This hypothesis was tested by microscopic magnetic resonance imaging (MMRI), a high-resolution tool able to detect subtle changes of vessels in small animals.

MATERIAL/METHODS

Fetuses from pregnant rats fed either 100 mg i.g. nitrofen or vehicle on E9.5 were recovered near term. A 7 T MMRI system with a coronal multislice fast spin echo sequence allowed diagnosis of CDH (n = 19), and T2 SE high-resolution sequences made assessment of the pattern and width of cervico-thoracic veins possible. Values were corrected for body size by dividing them by the length of thoracic vertebrae T3-T5. The results in nitrofen and control (n = 11) groups were compared by non-parametric tests (*p < 0.05).

RESULTS

Congenital diaphragmatic hernia fetuses were smaller than controls (4.5 ± 0.26 vs. 5.3 ± 0.2 g*). The widths (corrected for body size) of left external, both innominate, right superior vena cava and azygos veins were significantly smaller in CDH rats than in controls.

CONCLUSIONS

The cervico-thoracic veins are normally patterned but abnormally narrow (except the internal jugulars) in rats with CDH. The same embryonic NC dysregulation that accounts for cardiovascular malformations could also explain these venous anomalies in CDH.

Mouse embryonic phenotyping by morphometric analysis of MR images

A new method is described for automatic detection of subtle morphological phenotypes in mouse embryos. Based on high-resolution magnetic resonance imaging scanning and nonlinear image alignment, this method is demonstrated by comparing the morphology of two inbred strains, C57BL/6J and 129Sv/S1ImJ, at 15.5 days postconception. Mouse embryo morphology was found to be highly amenable to this kind of analysis with very low levels (on average 110 μm) of residual anatomical variation within strains after linear differences in pose and scale are removed. Mapping of local size differences showed that C57BL/6J embryos were larger than 129Sv/S1ImJ embryos, although these differences were not uniformly distributed across the anatomy. Expressed in terms of organ volumes, heart and lung were larger in C57BL/6J embryos, while brain and liver were comparable in volume between strains. The positive relationship between organ size and embryo size was consistent for the two strains but differed by organ, with the brain and liver being the least variable. Together these findings suggest the power of this technique for detecting subtle phenotypic differences arising from mutated genes.

Magnetic resonance virtual histology for embryos: 3D atlases for automated high-throughput phenotyping

Ambitious international efforts are underway to produce gene-knockout mice for each of the 25,000 mouse genes, providing a new platform to study mammalian development and disease. Robust, large-scale methods for morphological assessment of prenatal mice will be essential to this work. Embryo phenotyping currently relies on histological techniques but these are not well suited to large volume screening. The qualitative nature of these approaches also limits the potential for detailed group analysis. Advances in non-invasive imaging techniques such as magnetic resonance imaging (MRI) may surmount these barriers. We present a high-throughput approach to generate detailed virtual histology of the whole embryo, combined with the novel use of a whole-embryo atlas for automated phenotypic assessment. Using individual 3D embryo MRI histology, we identified new pituitary phenotypes in Hesx1 mutant mice. Subsequently, we used advanced computational techniques to produce a whole-body embryo atlas from 6 CD-1 embryos, creating an average image with greatly enhanced anatomical detail, particularly in CNS structures. This methodology enabled unsupervised assessment of morphological differences between CD-1 embryos and Chd7 knockout mice (n=5 Chd7(+/+) and n=8 Chd7(+/-), C57BL/6 background). Using a new atlas generated from these three groups, quantitative organ volumes were automatically measured. We demonstrated a difference in mean brain volumes between Chd7(+/+) and Chd7(+/-) mice (42.0 vs. 39.1mm(3), p<0.05). Differences in whole-body, olfactory and normalised pituitary gland volumes were also found between CD-1 and Chd7(+/+) mice (C57BL/6 background). Our work demonstrates the feasibility of combining high-throughput embryo MRI with automated analysis techniques to distinguish novel mouse phenotypes.

Microscopic magnetic resonance in congenital diaphragmatic hernia and associated malformations in rats

BACKGROUND/AIM

The research on congenital diaphragmatic hernia (CDH) is often carried out on the nitrofen fetal rat model in which most investigations involve microdissections and fastidious assessment of serial sections of different anatomic areas. Current microscopic magnetic resonance (MMR) equipment allows detailed anatomic studies of alive, fresh or fixed fetuses. The purpose of the present study was to demonstrate that CDH itself and most of the associated malformations are adequately imaged and measured by MMR.

MATERIALS AND METHODS

Fetuses from pregnant rats treated with either i.g. vehicle (control, n = 10) or 100 mg nitrofen (only those with CDH, n = 18) on E9.5 were recovered on E21 (term = E22) and total body was scanned by MMR under sedation in a 7 T MRI system (Bruker Medical, Ettlingen, Germany). CDH was detected with a coronal multislice fast spin echo sequence with a long repetition time and short effective echo time. Oblique MPR and 3D reconstructions were used. All studies were processed with attention to the hernia and its contents and the structure of the tracheobronchial tree and the lung, the heart and great vessels, the thymus and cervico-thoracic vertebrae. The findings in both groups were compared.

RESULTS

Congenital diaphragmatic hernia, lung hypoplasia and parenchymal features were clearly depicted. Tracheal ring anomalies were also demonstrated. The thymus was significantly smaller in CDH pups (2.9 x 1 x 2.4 mm) than in controls (4 x 1.3 x 2.8 mm) (p < 0.01). MRI was particularly performant for imaging cardiovascular anomalies: 4 double aortic arches, 3 Fallots, 3 right aortic arches, 3 ventricular septal defects and 1 aberrant subclavian artery.

CONCLUSIONS

Microscopic magnetic resonance involves refined and expensive equipment but it provides a powerful research tool for the study of CDH and other malformations in rat fetuses. Further work on this area is warranted.

Cardiac phenotyping in ex vivo murine embryos using microMRI

Microscopic MRI (microMRI) is an emerging technique for high-throughput phenotyping of transgenic mouse embryos, and is capable of visualising abnormalities in cardiac development. To identify cardiac defects in embryos, we have optimised embryo preparation and MR acquisition parameters to maximise image quality and assess the phenotypic changes in chromodomain helicase DNA-binding protein 7 (Chd7) transgenic mice. microMRI methods rely on tissue penetration with a gadolinium chelate contrast agent to reduce tissue T(1), thus improving signal-to-noise ratio (SNR) in rapid gradient echo sequences. We investigated 15.5 days post coitum (dpc) wild-type CD-1 embryos fixed in gadolinium-diethylene triamine pentaacetic acid (Gd-DTPA) solutions for either 3 days (2 and 4 mM) or 2 weeks (2, 4, 8 and 16 mM). To assess penetration of the contrast agent into heart tissue and enable image contrast simulations, T(1) and T(*) (2) were measured in heart and background agarose. Compared to 3-day, 2-week fixation showed reduced mean T(1) in the heart at both 2 and 4 mM concentrations (p < 0.0001), resulting in calculated signal gains of 23% (2 mM) and 29% (4 mM). Using T(1) and T(*) (2) values from 2-week concentrations, computer simulation of heart and background signal, and ex vivo 3D gradient echo imaging, we demonstrated that 2-week fixed embryos in 8 mM Gd-DTPA in combination with optimised parameters (TE/TR/alpha/number of averages: 9 ms/20 ms/60 degrees /7) produced the largest SNR in the heart (23.2 +/- 1.0) and heart chamber contrast-to-noise ratio (CNR) (27.1 +/- 1.6). These optimised parameters were then applied to an MRI screen of embryos heterozygous for the gene Chd7, implicated in coloboma of the eye, heart defects, atresia of the choanae, retardation of growth, genital/urinary abnormalities, ear abnormalities and deafness (CHARGE) syndrome (a condition partly characterised by cardiovascular birth defects in humans). A ventricular septal defect was readily identified in the screen, consistent with the human phenotype.

Measurements of the diameters of the great arteries and semi-lunar valves of chick and mouse embryos

The great arteries of embryos are small channels of a complex three-dimensional arrangement. Measurements of their diameters, as required for understanding cardiovascular morphogenesis and the genesis of malformations, cannot be performed in two-dimensional histological sections. We present and evaluate a quick and simple method for performing highly significant and objective measurements of the diameters of blood vessels in vertebrate embryos and used this method for providing statistics of the diameter of the semi-lunar valves and the lumina of the great arteries of early chick and mouse foetus. We employed the high-resolution episcopic microscopy technique for generating volume data and three-dimensional computer models of the arterial trees of 30 chick embryos (Hamburger Hamilton stage 34), 30 mouse embryos of the OF1 strain harvested on 14.5 dpc, 30 embryos of the OF1 strain harvested on 15.5 dpc and 28 mouse embryos of the PARKES strain harvested on 14.5 dpc. The three-dimensional models (voxel size 2 mum x 2 mum x 2 mum and 3 mum x 3 mum x 3 mum) were used for defining virtual resection planes perpendicular to the longitudinal axis of the blood vessels at comparable positions. In these planes, we measured the lumen areas and the lumen perimeters. We also calculated the lumen diameter and the true lumen area from the perimeter and present statistical analysis. Finally, we evaluate and discuss the reliability and reproducibility of our method and present all measurements in a form that minimizes the influence of specimen size variation, specimen processing and data generation methods.

Rapid 3-dimensional imaging of embryonic craniofacial morphology using microscopic computed tomography

OBJECTIVE

Microscopic computed tomography (microCT) has been recently applied to morphological evaluation of mouse embryos with or without congenital malformations, and 3-dimensional (3D) digital images of the whole embryo can be obtained. In the present study, the authors report a modified, rapid technique of 3D embryonic microCT without processing with osmium tetroxide.

METHODS

Normal embryonic days 10.5 to 11 mouse embryos, as well as those with craniofacial anomalies treated with teratogens, were examined. After fixation, we processed the embryo samples with hexamethyldisilazane, instead of highly toxic osmium tetroxide in the original method.

RESULTS

Our protocol enabled clear 3D craniofacial imaging of the normal and anomalous mouse embryos within a short period of 20 minutes or 1 hour. In addition, some anatomical landmarks were clearly detected in the reconstituted craniofacial section images.

CONCLUSION

Our present data suggest a possible role of microCT for high-throughput morphological screening of the mouse embryos with craniofacial anomalies.

High-resolution magnetic resonance histology of the embryonic and neonatal mouse: a 4D atlas and morphologic database

Engineered mice play an ever-increasing role in defining connections between genotype and phenotypic expression. The potential of magnetic resonance microscopy (MRM) for morphologic phenotyping in the mouse has previously been demonstrated; however, applications have been limited by long scan times, availability of the technology, and a foundation of normative data. This article describes an integrated environment for high-resolution study of normal, transgenic, and mutant mouse models at embryonic and neonatal stages. Three-dimensional images are shown at an isotropic resolution of 19.5 microm (voxel volumes of 8 pL), acquired in 3 h at embryonic days 10.5-19.5 (10 stages) and postnatal days 0-32 (6 stages). A web-accessible atlas encompassing this data was developed, and for critical stages of embryonic development (prenatal days 14.5-18.5), >200 anatomical structures have been identified and labeled. Also, matching optical histology and analysis tools are provided to compare multiple specimens at multiple developmental stages. The utility of the approach is demonstrated in characterizing cardiac septal defects in conditional mutant embryos lacking the Smoothened receptor gene. Finally, a collaborative paradigm is presented that allows sharing of data across the scientific community. This work makes magnetic resonance microscopy of the mouse embryo and neonate broadly available with carefully annotated normative data and an extensive environment for collaborations.

Semi-automatic classification of skeletal morphology in genetically altered mice using flat-panel volume computed tomography

Rapid progress in exploring the human and mouse genome has resulted in the generation of a multitude of mouse models to study gene functions in their biological context. However, effective screening methods that allow rapid noninvasive phenotyping of transgenic and knockout mice are still lacking. To identify murine models with bone alterations in vivo, we used flat-panel volume computed tomography (fpVCT) for high-resolution 3-D imaging and developed an algorithm with a computational intelligence system. First, we tested the accuracy and reliability of this approach by imaging discoidin domain receptor 2- (DDR2-) deficient mice, which display distinct skull abnormalities as shown by comparative landmark-based analysis. High-contrast fpVCT data of the skull with 200 μm isotropic resolution and 8-s scan time allowed segmentation and computation of significant shape features as well as visualization of morphological differences. The application of a trained artificial neuronal network to these datasets permitted a semi-automatic and highly accurate phenotype classification of DDR2-deficient compared to C57BL/6 wild-type mice. Even heterozygous DDR2 mice with only subtle phenotypic alterations were correctly determined by fpVCT imaging and identified as a new class. In addition, we successfully applied the algorithm to classify knockout mice lacking the DDR1 gene with no apparent skull deformities. Thus, this new method seems to be a potential tool to identify novel mouse phenotypes with skull changes from transgenic and knockout mice on the basis of random mutagenesis as well as from genetic models. However for this purpose, new neuronal networks have to be created and trained. In summary, the combination of fpVCT images with artificial neuronal networks provides a reliable, novel method for rapid, cost-effective, and noninvasive primary screening tool to detect skeletal phenotypes in mice.

Transgenic mice are key models to shed new light on gene function during development and disease. Reliable high-throughput screening tools will facilitate the identification of transgenic mice with distinct phenotypes. In particular, alterations of the skull are difficult to detect by visual inspection due to its very complex morphological structure. Here, we used high-resolution flat-panel volume computed tomography (fpVCT), a novel semi-automatic screening tool to image skull-shape features of mice. The resulting 3-D datasets were combined with artificial neuronal networks and complex nonlinear computational models to permit rapid and automatic interpretation of the images. Compared to the extremely laborious landmark-based analysis, the manual work in our approach was reduced to the control of skull segmentation of images obtained by fpVCT. We applied our approach to genetically altered mice and various mouse strains and showed that it is an accurate and reliable method to successfully identify mice with skeletal phenotypes. We suggest the new methodology will also be a valuable tool for an in vivo, rapid, cost-effective, and reliable primary screen to identify skull abnormalities generated by random mouse mutagenesis experiments.

Visualization of human prenatal development by magnetic resonance imaging (MRI)

It is essential to visualize the structures of embryos and their internal organs three-dimensionally to analyze morphogenesis; this used to rely solely on serial histological sectioning and solid reconstruction, which were tedious and time-consuming. We have applied imaging with a magnetic resonance (MR) microscope equipped with a 2.35 T superconducting magnet to visualize human embryos; we were successful in acquiring high-resolution sectional images and in identifying the detailed structures of major organs. The imaging process was facilitated by using a super-parallel MR microscope. A dataset of MR images of more than 1,000 human embryos, now collected, will be important for future biomedical research and for education.

microMRI-HREM pipeline for high-throughput, high-resolution phenotyping of murine embryos

Rapid and precise phenotyping analysis of large numbers of wild-type and mutant mouse embryos is essential for characterizing the genetic and epigenetic factors regulating embryogenesis. We present a novel methodology that permits precise high-throughput screening of the phenotype of embryos with both targeted and randomly generated mutations. To demonstrate the potential of this methodology we show embryo phenotyping results produced in a large-scale ENU-mutagenesis study. In essence this represents an analysis pipeline, which starts with simultaneous micro-magentic resonance imaging (microMRI) screening (voxel size: 25.4 x 25.4 x 24.4 microm) of 32 embryos in one run. Embryos with an indistinct phenotype are then cut into parts and suspect organs and structures are analysed with HREM (high-resolution episcopic microscopy). HREM is an imaging technique that employs 'positive' eosin staining and episcopic imaging for generating three-dimensional (3D) high-resolution (voxel size: 1.07 x 1.07 x 2 microm) digital data of near histological contrast and quality. The results show that our method guarantees the rapid availability of comprehensive phenotype information for high numbers of embryos in, if necessary, histological quality and detail. The combination of high-throughput microMRI with HREM provides an alternative screening pipeline with advantages over existing 3D phenotype screening methods as well as traditional histology. Thus, the microMRI-HREM phenotype analysis pipeline recommends itself as a routine tool for analysing the phenotype of transgenic and mutant embryos.

MRI in mouse developmental biology

Mice are used in many studies to determine the role of genetic and molecular factors in mammalian development and human congenital diseases. MRI has emerged as a major method for analyzing mutant and transgenic phenotypes in developing mice, at both embryonic and neonatal stages. Progress in this area is reviewed, with emphasis on the use of MRI to analyze cardiovascular and neural development in mice. Comparisons are made with other imaging technologies, including optical and ultrasound imaging, discussing the potential strengths and weaknesses of MRI and identifying the future challenges for MRI in mouse developmental biology.

Contrast-enhanced MRI of right ventricular abnormalities in Cx43 mutant mouse embryos

Imaging of the mammalian cardiac right ventricle (RV) is particularly challenging, especially when a two-dimensional method such as conventional histology is used to evaluate the morphology of this asymmetric, crescent-shaped chamber. MRI may improve the characterization of mutants with RV phenotypes by allowing analysis of the samples in any plane and by facilitating three-dimensional image reconstruction. MRI was used to examine the conditional knockout Cx43-PCKO mouse line known to have RV malformations. To help delineate the cardiovascular system and facilitate identification of the right ventricular outflow tract (RVOT), embryonic day (E) 17.5 embryos were perfusion fixed through the umbilical vein followed by a gadolinium-based contrast agent mixed in 7% gelatin. Micro-MRI experiments were performed at 7 T and followed by paraffin embedding of specimens, histological sectioning and hematoxylin and eosin (H&E) staining. Imaging of up to four embryos simultaneously allowed for higher throughput than traditional individual imaging techniques, while intravascular contrast afforded excellent signal-to-noise characteristics. All control embryos (n = 4) and heterozygous Cx43 knockout embryos (n = 4) had normal-appearing right ventricular outflow tract contours by MRI. Obvious abnormalities in the RVOT, including abnormal bulging and infiltration of contrast into the wall of the RV, were seen in three out of four Cx43-PCKO mutants with MRI. Furthermore, three-dimensional reconstruction of MR images with orthogonal projections as well as maximum-intensity projection allowed for visualization of the relationship of infundibular bulging segments to the pulmonary trunk in Cx43-PCKO mutant hearts. The addition of MRI to standard histology in the characterization of RV malformations in mutant mouse embryos aids in the assessment and understanding of morphologic abnormalities. Flexibility in the viewing of MR images, which can be retrospectively sectioned in any desired orientation, is particularly useful in the investigation of the RV, an asymmetric chamber that is difficult to analyze with two-dimensional techniques.

Quantifying cardiovascular flow dynamics during early development

The relationship between developing biologic tissues and their dynamic fluid environments is intimate and complex. Increasing evidence supports the notion that these embryonic flow-structure interactions influence whether development will proceed normally or become pathogenic. Genetic, pharmacological, or surgical manipulations that alter the flow environment can thus profoundly influence morphologic and functional cardiovascular phenotypes. Functionally deficient phenotypes are particularly poorly described as there are few imaging tools with sufficient spatial and temporal resolution to quantify most intra-vital flows. The ability to visualize biofluids flow in vivo would be of great utility in functionally phenotyping model animal systems and for the elucidation of the mechanisms that underlie flow-related mechano-sensation and transduction in living organisms. This review summarizes the major methodological advances that have evolved for the quantitative characterization of intra-vital fluid dynamics with an emphasis on assessing cardiovascular flows in vertebrate model organisms.

Virtual histology of transgenic mouse embryos for high-throughput phenotyping

A bold new effort to disrupt every gene in the mouse genome necessitates systematic, interdisciplinary approaches to analyzing patterning defects in the mouse embryo. We present a novel, rapid, and inexpensive method for obtaining high-resolution virtual histology for phenotypic assessment of mouse embryos. Using osmium tetroxide to differentially stain tissues followed by volumetric X-ray computed tomography to image whole embryos, isometric resolutions of 27 μm or 8 μm were achieved with scan times of 2 h or 12 h, respectively, using mid-gestation E9.5–E12.5 embryos. The datasets generated by this method are immediately amenable to state-of-the-art computational methods of organ patterning analysis. This technique to assess embryo anatomy represents a significant improvement in resolution, time, and expense for the quantitative, three-dimensional analysis of developmental patterning defects attributed to genetically engineered mutations and chemically induced embryotoxicity.

Developmental biology is entering the digital age, thanks to advancements in imaging technologies, instrumentation, and software. These advancements are converging with discoveries in developmental biology to deliver unprecedented insight into how human development is impacted by the products we use, the environment we live in, and our genetic composition. Industrial societies are becoming increasingly concerned with the exposure of women and their unborn fetuses to pharmaceuticals and commonplace household chemicals. In addition, understanding genetic causes of birth defects is now possible through the isolation of specific genes, which can be efficiently disrupted in embryos, and subsequently observed for birth defects. Such studies of embryotoxicity typically involve the use of mouse embryos. However, evaluation of mouse embryos in the past has involved expensive and cumbersome external inspection and thin sectioning for view under the microscope. As such, developmental biologists have eagerly anticipated the advent of tools that would allow them to routinely assess the complex and dynamic organization of embryos using techniques that are fast and inexpensive. In this article, the authors introduce a rapid, high-quality, and inexpensive technique for the three-dimensional visualization of mouse embryos using X-ray computed tomography that is ideally suited for researchers in pharmaceutical, industrial, and academic laboratories.

Multimodal imaging of mouse development: Tools for the postgenomic era

With the sequence of the mouse genome known, it is now possible to create or identify mutations in every gene to determine the molecules necessary for normal development. Consequently, there is a growing need for advanced phenotyping tools to best understand defects produced by altering gene function. Perhaps nothing is more satisfying than to directly observe a process in action; to disturb it and see for ourselves how the process changes before our very eyes. No doubt, this desire is what drove the invention of the very first microscopes and continues to this day to fuel progress in the field of biological imaging. Because mouse embryos are small and develop embedded within many tissue layers within the nurturing environment of the mother, directly observing the dynamic, micro- and nanoscopic events of early mammalian development has proven to be one of the greater challenges for imaging scientists. Here, I will review some of the imaging methods being used to study mouse development, highlighting the results obtained from imaging.