Towards plant protein refinery: Review on protein extraction using alkali and potential enzymatic assistance

Co-production of plant- and microbial- proteins from waste tobacco leaves by optimizing alkaline extraction and strengthening pectin bioconversion

The production of alternative proteins is of great significance in the mitigation of food problems. This study proposes an integrated approach including protein extraction, enzymatic hydrolysis, and fermentation to produce both plant proteins and single-cell proteins as alternative proteins from tobacco leaves, a highly-abundant and protein-rich agricultural waste. Alkaline extraction of proteins before polysaccharide hydrolysis was found to be preferable for increasing the yields of plant proteins and mono-sugars. The combined use of pectinase-rich enzymes from Aspergillus brunneoviolaceus and hemicellulase-rich enzymes from Penicillium oxalicum achieved the release of 80.7 % of the sugars after 72 h. Cutaneotrichosporon cutaneum could simultaneously utilize multiple sugars, including galacturonic acid, in the enzymatic hydrolysate to produce single-cell proteins. Via this approach, 43.54 g crude proteins of high protein contents and rich in essential amino acids can be produced from 100.00 g waste tobacco leaves, providing a promising strategy for its valorization.

The composition, extraction, functional property, quality, and health benefits of coconut protein: A review

Coconut is widely appreciated for its distinctive flavor and is commonly utilized in the production of a variety of goods. Coconut protein, a by-product derived from coconut oil and coconut milk cake, is frequently underutilized or discarded. This study provides a comprehensive overview of the distribution and composition of coconut protein. Analyses reveal that coconut protein, specifically 11S globulin and 7S globulin, is predominantly found in coconut flesh. Furthermore, various extraction techniques for coconut protein, such as chemical, enzymatic, and physical methods, are discussed. The alkali dissolution and acid precipitation methods are widely utilized for extracting coconut protein, with the potential for enhancement through the incorporation of physical methods such as ultrasound. The evaluation of functional properties, quality, and health benefits of coconut protein is essential, given the limitations imposed by its solubility. Modification may be necessary to optimize its functional properties. Coconut presents a promising source of food protein, characterized by balanced amino acid composition, high digestibility, and low allergenic potential. In conclusion, this study provides a comprehensive overview of the extraction methods, functional properties, quality, and nutritional benefits of coconut protein, offering insights for potential future research directions in the field. Additionally, the information presented may serve as a valuable reference for incorporating coconut protein into plant-based food products.

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Spray dried protein concentrates from white button and oyster mushrooms produced by ultrasound-assisted alkaline extraction and isoelectric precipitation

BACKGROUND

In the present study, the optimization of ultrasound-assisted alkaline extraction (UAAE) and isoelectric precipitation (IEP) was applied to white button (WBM) and oyster (OYM) mushroom flours to produce functional spray dried mushroom protein concentrates. Solid-to-liquid ratio (5-15% w/v), ultrasound power (0-900 W) and type of acid [HCl or acetic acid (AcOH)] were evaluated for their effect on the extraction and protein yields from mushroom flours submitted to UAAE-IEP protein extraction.

RESULTS

Prioritized conditions with maximized protein yield (5% w/v, 900 W, AcOH, for WBM; 5% w/v, 900 W, HCl for OYM) were used to produce spray dried protein concentrates from white button (WBM-PC) and oyster (OYM-PC) mushrooms with high solids recovery (62.3-65.8%). WBM-PC and OYM-PC had high protein content (5.19-5.81 g kg-1), in addition to remarkable foaming capacity (82.5-235.0%) and foam stability (7.0-162.5%), as well as antioxidant phenolics. Highly pH-dependent behavior was observed for solubility (> 90%, at pH 10) and emulsifying properties (emulsification activity index: > 50 m2 g-1, emulsion stability index: > 65%, at pH 10). UAAE-IEP followed by spray drying increased surface hydrophobicity and free sulfhydryl groups by up to 196.5% and 117.5%, respectively, which improved oil holding capacity (359.9-421.0%) and least gelation concentration (6.0-8.0%) of spray dried mushroom protein concentrates.

CONCLUSION

Overall, the present study showed that optimized UAAE-IEP coupled with spray drying is an efficient strategy to produce novel mushroom protein concentrates with enhanced functional attributes for multiple food applications. © 2024 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

An efficient protocol for the extraction of pigment-free active polyphenol oxidase and soluble proteins from plant cells

The elimination of brownish pigments from plant protein extracts has been a challenge in plant biochemistry studies. Although numerous approaches have been developed to reduce pigments for enzyme assays, none has been able to completely remove pigments from plant protein extracts for biochemical studies. A simple and effective protocol was developed to completely remove pigments from plant protein extracts. Proteins were extracted from red anthocyanin-rich transgenic and greenish wild-type tobacco cells cultured on agar-solidified Murashige and Skoog medium. Protein extracts from these cells were brownish or dark due to the pigments. Four approaches were comparatively tested to show that the diethylaminoethyl (DEAE)-Sephadex anion exchange gel column was effective in completely removing pigments to obtain transparent pigment-free protein extracts. A Millipore Amicon® Ultra 10K cut-off filter unit was used to effectively desalt proteins. Moreover, the removal of pigments significantly improved the measurement accuracy of total soluble proteins. Furthermore, enzymatic assays using catechol as a substrate coupled with high-performance liquid chromatography analysis demonstrated that the pigment-free proteins not only showed polyphenol oxidase (PPO) activity but also enhanced the catalytic activity of PPO. Taken together, this protocol is effective for extracting pigment-free plant proteins for plant biochemistry studies. A simple and effective protocol was successfully developed to not only completely and effectively remove anthocyanin and polyphenolics-derived quinone pigments from plant protein extracts but also to decrease the effects of pigments on the measurement accuracy of total soluble proteins. This robust protocol will enhance plant biochemical studies using pigment-free native proteins, which in turn increase their reliability and sensitivity.

Ingredient Functionality of Soy, Chickpea, and Pea Protein before and after Dry Heat Pretreatment and Low Moisture Extrusion

This study investigates the impact of dry heat pretreatment on the functionality of soy, chickpea, and pea protein ingredients for use in texturized vegetable protein (TVP) production via low moisture extrusion. The protein powders were heat-treated at temperatures ranging from 80 °C to 160 °C to modulate the extent of protein denaturation and assess their effects on RVA pasting behavior, water absorption capacity (WAC), and color attributes. The results indicate that the pretreatment temperature significantly influenced the proteins' functional properties, with an optimal temperature of 120 °C enhancing pasting properties and maintaining WAC, while a higher pretreatment temperature of 160 °C led to diminished ingredient functionality. Different protein sources exhibited distinct responses to heat pretreatment. The subsequent extrusion processing revealed significant changes in extrudate density and color, with increased density and darkness observed at higher pretreatment temperatures. This research provides insights into the interplay between protein sources, pretreatment conditions, and extrusion outcomes, highlighting the importance of controlled protein denaturation for developing high-quality, plant-based meat analogues. The findings have broad implications for the optimization of meat analogue manufacturing, with the aim of enhancing the sensory experience and sustainability of plant-based foods.

Unlocking the nutritional and functional potential of legume waste to produce protein ingredients

Worldwide, many production supply chains generate a considerable amount of legume by-products (e.g., leaves, husks, broken seeds, defatted cakes). These wastes can be revalorized to develop sustainable protein ingredients, with positive economic and environmental effects. To separate protein from legume by-products, a broad spectrum of conventional (e.g., alkaline solubilization, isoelectric precipitation, membrane filtration) and novel methodologies (e.g., ultrasound, high-pressure homogenization, enzymatic approaches) have been studied. In this review, these techniques and their efficiency are discussed in detail. The present paper also provides an overview of the nutritional and functional characteristics of proteins extracted from legume by-products. Moreover, existing challenges and limitations associated with the valorization of by-product proteins are highlighted, and future perspectives are proposed.

Non-animal protein hydrolysates from agro-industrial wastes: A prospect of alternative inputs for cultured meat

In light of the growing demand for alternative protein sources, laboratory-grown meat has been proposed as a potential solution to the challenges posed by conventional meat production. Cultured meat does not require animal slaughter and uses sustainable production methods, contributing to animal welfare, human health, and environmental sustainability. However, some challenges still need to be addressed in cultured meat production, such as the use of fetal bovine serum for medium supplementation. This ingredient has limited availability, increases production costs, and raises ethical concerns. This review explores the potential of non-animal protein hydrolysates derived from agro-industrial wastes as substitutes for critical components of fetal bovine serum in cultured meat production. Despite the lack of standardization of hydrolysate composition, the potential benefits of this alternative protein source may outweigh its disadvantages. Future research holds promise for increasing the accessibility of cultured meat.

Structural evolution of pea-derived albumins during pH and heat treatment studied with light and X-ray scattering

Pea albumins are found in the side stream during the isolation of pea proteins. They are soluble at acidic pH and have functional properties which differ from their globulin counterparts. In this study, we have investigated the aggregation and structural changes occurring to pea albumins under different environmental conditions, using a combination of size-exclusion chromatography coupled with multi-angle laser light scattering (SEC-MALS) and small-angle X-ray scattering (SAXS). Albumins were extracted from a dry fractionated pea protein concentrate by precipitating the globulin fraction at acidic pH. The albumins were then studied at different pH (3, 4, 4.5, 7, 7.5, and 8) values. The effect of heating at 90 °C for 1, 3, and 5 min on their structural changes was investigated using SAXS. In addition, size exclusion of the albumins showed 4 distinct populations, depending on pH and heating conditions, with two large aggregates peaks (∼250 kDa): a dimer peak (∼24 kDa) containing predominantly pea albumin 2 (PA2), and a monomer peak of a molar mass of about 12 kDa (PA1). X-ray scattering intensities as a function of q were modeled as polydisperse spheres, and their aggregation was followed as a function of heating time. Albumins was most stable at pH 3, showing no aggregation during heat treatment. While albumins at pH 7.5 and 8 showed aggregation after heating, solutions at pH 4, 4.5, and 7 already contained aggregates even before heating. This work provides new knowledge on the overall structural development of albumins under different environmental conditions, improving our ability to employ these as future ingredients in foods.

Protein, lipid, and chitin fractions from insects: Method of extraction, functional properties, and potential applications

Edible insects are accepted as food and feed ingredients in many parts of the world. Insects account for more than 80% of animal kingdom providing rich biodiversity of protein and lipid profiles compared to conventional livestock. Insect biomasses contain an average of 35-62% protein, 3-57% lipid, and 3-12% chitin, and their nutritional values are widely recognized due to their presence, including minerals, and vitamins. While whole insects are consumed as eggs, larvae, pupae, or adults, there has been a recent uptick in interest to use fractions, e.g., protein, lipid, and chitin, as food and feed ingredients. To utilize these fractions in various food and feed preparations, a deeper understanding of the physicochemical as well as functional properties of the ingredients is required, which are generally impacted by extraction and preparation processes. Thus, the methods of extraction/purification are important to preserve the quality and functional properties of these ingredients. This paper discusses the extraction methods for insect protein, lipid, and chitin, their functional properties, and potential applications in food and feed applications.

Oil-water interface and emulsion stabilising properties of rapeseed proteins napin and cruciferin studied by nonlinear surface rheology

HYPOTHESIS

Two major protein families are present in rapeseed, namely cruciferins and napins. The structural differences between the two protein families indicate that they might behave differently when their mixture stabilises oil-water interfaces. Therefore, this work focuses on elucidating the role of both proteins in interface and emulsion stabilisation.

EXPERIMENTS

Protein molecular properties were evaluated, using SEC, DSC, CD, and hydrophobicity analysis. The oil-water interface mechanical properties were studied using LAOS and LAOD. General stress decomposition (GSD) was used as a novel method to characterise the nonlinear response. Additionally, to evaluate the emulsifying properties of the rapeseed proteins, emulsions were prepared using pure napins or cruciferin and also their mixtures at 1:3, 1:1 and 3:1 (w:w) ratios.

FINDINGS

Cruciferins formed stiff viscoelastic solid-like interfacial layers (Gs' = 0.046 mN/m; Ed' = 30.1 mN/m), while napin formed weaker and more stretchable layers at the oil-water interface (Gs' = 0.010 mN/m; Ed' = 26.4 mN/m). As a result, cruciferin-formed oil droplets with much higher stability against coalescence (coalescence index, CI up to 10%) than napin-stabilised ones (CI up to 146%) during two months of storage. Both proteins have a different role in emulsions produced with napin-cruciferin mixtures, where cruciferin provides high coalescence stability, while napin induces flocculation. Our work showed the role of each rapeseed protein in liquid-liquid multiphase systems.

Oilseed meal proteins: From novel extraction methods to nanocarriers of bioactive compounds

The global demand for animal proteins is predicted to increase twofold by 2050. This has led to growing environmental and health apprehensions, thereby prompting the appraisal of alternative protein sources. Oilseed meals present a promising alternative due to their abundance in global production and inherent dietary protein content. The alkaline extraction remains the preferred technique for protein extraction from oilseed meals in commercial processes. However, the combination of innovative techniques has proven to be more effective in the recovery and functional modification of oilseed meal proteins (OMPs), resulting in improved protein quality and reduced allergenicity and environmental hazards. This manuscript explores the extraction of valuable proteins from sustainable sources, specifically by-products from the oil processing industry, using emerging technologies. Chemical structure, nutritional value, and functional properties of the main OMPs are evaluated with a particular focus on their potential application as nanocarriers for bioactive compounds.

Dairy, Plant, and Novel Proteins: Scientific and Technological Aspects

Alternative proteins have gained popularity as consumers look for foods that are healthy, nutritious, and sustainable. Plant proteins, precision fermentation-derived proteins, cell-cultured proteins, algal proteins, and mycoproteins are the major types of alternative proteins that have emerged in recent years. This review addresses the major alternative-protein categories and reviews their definitions, current market statuses, production methods, and regulations in different countries, safety assessments, nutrition statuses, functionalities and applications, and, finally, sensory properties and consumer perception. Knowledge relative to traditional dairy proteins is also addressed. Opportunities and challenges associated with these proteins are also discussed. Future research directions are proposed to better understand these technologies and to develop consumer-acceptable final products.

Comparative evaluation of milk proteins and oil-seed-cake-derived proteins extracted by chemical and biological methods for obesity management

BACKGROUND

In light of the exponential rise in global population, there is a critical requirement to reduce food waste on a global scale. According to studies, agricultural wastes such as oil-seed cakes offer great nutritional value. Acid precipitation (A) and alkaline extraction methods (traditional methods) were used to extract protein from oil-seed cakes; however, both procedures are linked to decreased protein quality and quantity, which prompted the development of a novel strategy known as the biological/microbial/probiotic (B) method. Therefore, the present study aimed to highlight the optimal way of protein extraction from oil-seed cakes and the effect of extraction methods on protein efficacy against obesity. The outcomes were also compared with milk proteins.

RESULTS

In vitro study provided evidence that proteins from both sources (plant and milk) suppressed adipogenesis and stimulated adipolysis in 3T3L-1 cells. For the in vivo study, mice were fed with different protein extracts: soya protein preparation (SPP), ground protein preparation (GPP), whey protein (WP) and casein protein (CP) containing 40% of their calories as fat. Body weight decreased significantly in all the rats except CP-fed rats. Body mass index, atherogenic index, plasma triglyceride and very-low-density lipoprotein cholesterol level decreased significantly in all the groups in comparison to the model group (high-fat-diet group), but the decrease was more pronounced in plant proteins than milk proteins. In hepatocytes, the expression of fasting-induced adipose factor, carnitine palmitoyltransferase I and peroxisome proliferator-activated receptor α genes was increased significantly in SPP-fed groups. Adiponectin gene expression was upregulated significantly in visceral fat tissue in groups fed SPP-B, GPP-A and CP, whereas leptin gene was downregulated significantly in all groups except SPP-A.

CONCLUSION

This study demonstrates that SPP-B showed the most effective anti-obesity property, followed by WP. Additionally, we found that the biological precipitation approach produced better outcomes for plant proteins isolated from oil-seed cakes than the acid precipitation method. © 2023 Society of Chemical Industry.

Techno-functional attributes of oilseed proteins: influence of extraction and modification techniques

Plant-based protein isolates and concentrates are nowadays becoming popular due to their nutritional, functional as well as religious concerns. Among plant proteins, oilseeds, a vital source of valuable proteins, are continuously being explored for producing protein isolates/concentrates. This article delineates the overview of conventional as well as novel methods for the extraction of protein and their potential impact on its hydration, surface properties, and rheological characteristics. Moreover, proteins undergo several modifications using physical, chemical, and biological techniques to enhance their functionality by altering their microstructure and physical performance. The modified proteins hold a pronounced scope in novel food formulations. An overview of these protein modification approaches and their effects on the functional properties of proteins have also been presented in this review.

Application of plant-based proteins for fortification of oat yogurt storage stability and bioactivity

The purpose of this study was to evaluate the addition of plant-based peanut protein isolate (PNP) and commercial pea protein (CPP) on the quality of oat yogurt (OY). PNP and CPP were partially characterized for techno-functional properties. PNP had higher solubility (acidic and basic regions) and emulsifying activity than CPP. The water absorption capacity of CPP is significantly (p < 0.05) higher than PNP. Amino acid profiles of PNP and CPP were promising for the nutritional enhancement of OYs. OYs with PNP or CPP (0.5, 1, 2% w/v) were stored for 21 days and compared to the control group with no protein. On the 21st day of storage, (i) PNP- or CPP-added OYs were found to be comparable to the control with respect to post-acidification and viscosity, (ii) syneresis was more evident in PNP-added OYs than in CPP-added ones, (iii) total color change of 1% CPP-added OY was equal to the control, and (iv) hardnesses of control, 2% PNP, and 2% CPP-added OYs were 0.29 ± 0.00, 0.39 ± 0.01, and 0.45 ± 0.00 N, respectively. No adverse sensory effects were detected for CPP or PNP addition. Both proteins increased the total phenolic, soluble protein, antioxidant, antihypertensive, and α-glucosidase inhibition activity of oat milk and OYs, with PNP superior to CPP overall. Compared to oat milk, the fermentation process increased ACE inhibition activity in in vitro digested samples, whereas it reduced digested yogurts' antioxidant activity. Utilization of PNP in OY can solve the waste problem of peanut producers and the texture problem of the OY producers while formulating a functional product. PRACTICAL APPLICATION: Plant-based (PB) yogurts have a growing consumer demand. The low-protein content of PB yogurts results in low acceptance with respect to their undesirable textural and sensorial attributes. This study provided a technical basis for the PB yogurt manufacturers focusing on the addition of commercial pea protein and isolated peanut protein into oat yogurt formulation without any thickeners or flavors. In vitro digestion of protein-added oat milk and oat yogurts showed the benefits of fermentation on bioactivity to the consumers.

Applications of Enzyme Technology to Enhance Transition to Plant Proteins: A Review

As the plant-based food market grows, demand for plant protein is also increasing. Proteins are a major component in foods and are key to developing desired structures and textures. Seed storage proteins are the main plant proteins in the human diet. They are abundant in, for example, legumes or defatted oilseeds, which makes them an excellent candidate to use in the development of novel plant-based foods. However, they often have low and inflexible functionalities, as in nature they are designed to remain densely packed and inert within cell walls until they are needed during germination. Enzymes are often used by the food industry, for example, in the production of cheese or beer, to modify ingredient properties. Although they currently have limited applications in plant proteins, interest in the area is exponentially increasing. The present review first considers the current state and potential of enzyme utilization related to plant proteins, including uses in protein extraction and post-extraction modifications. Then, relevant opportunities and challenges are critically discussed. The main challenges relate to the knowledge gap, the high cost of enzymes, and the complexity of plant proteins as substrates. The overall aim of this review is to increase awareness, highlight challenges, and explore ways to address them.

Isolation and Characterization of Protein Fractions for Valorization of Sacha Inchi Oil Press-Cake

The growing interest in plant-based food protein sources has provided opportunities for the valorization of agri-food by-products, driving the food industry towards more sustainable development. In this study, three extraction procedures (varying the pH value (7.0 and 11.0) and the addition of salt (0 and 5%)) were investigated to obtain seven different protein fractions (SIPF) from Sacha Inchi oil press-cake (SIPC), which were characterized in terms of their protein content, electrophoretic profile, secondary structure, and techno-functional properties. Extractions at pH 11.0 without salt addition produced the highest values of protein content, extraction yield, protein recovery, and protein concentration increase (84.0%, 24.7%, 36.5%, and 1.5-fold, respectively). Under these extraction conditions, the electrophoretic analysis indicated that most of the SIPC proteins were extracted. SIPF displayed an excellent oil absorption capacity (4.3-9.0 w/w), and interesting foam activity (36.4-133.3%). The solubility and emulsifying activity of the albumin fractions were significantly higher than those of the other fractions (~87 vs. <15.8%, and 280-370 vs. <140 m²/g, respectively). Correlation analysis showed that the secondary structure of the SIPF significantly influences their techno-functional properties. These results indicate that SIPC is a by-product of great potential for protein extraction processes, and as a valorization strategy for technical cycle solutions for the Sacha Inchi productive chain in the circular economy context.

Effects of fermentation and enzymatic treatment on phenolic compounds and soluble proteins in oil press cakes of canola (Brassica napus)

To develop novel processes for valorizing agro-industry side-streams, canola (Brassica napus) oil press cakes (CPC) were treated with lactic acid bacteria, carbohydrase, and protease. Altogether 29 protein-rich liquid fractions were obtained, of which the composition was analyzed using chromatographic and mass spectrometric methods. A clear association was revealed between the treatments and phenolic profile. Applying certain lactic acid bacteria enhanced the release of sinapic acid, sinapine, glycosylated kaempferols, and other phenolic compounds from CPC. Co-treatment using protease and Lactiplantibacillus plantarum was effective in degrading these compounds. The fraction obtained after 16 h of hydrolysis (with Protamex® of 2% dosage) and 48 h of fermentation (using L. plantarum) contained the lowest phenolic content (0.2 g/100 g DM) and a medium level of soluble proteins (78 g/100 g) among all samples studied. The fractions rich in soluble proteins and low in phenolics are potential food ingredients with improved bioavailability and sensory properties.

Decellularization: Leveraging a Tissue Engineering Technique for Food Production

The edible nature of many plants makes leaves particularly useful as scaffolds for the development of cultured meat, where animal tissue is grown in the laboratory setting. Recently, we demonstrated that decellularized spinach leaves can serve as scaffolds to grow and differentiate cells for cultured meat products. However, conventional decellularization methods use solutions that are not considered safe for use in food, such as organic solvents (hexanes) and detergents (triton X-100 (TX100)). This study modified decellularization protocols to incorporate detergents that are regulated (REG) by the United States Food and Drug Administration (FDA) for use in food, such as Polysorbate 20 (PS20), and eliminates the use of hexanes for cuticle removal. Spinach leaves were decellularized with sodium dodecyl sulfate and then with either TX100 (control) or PS20. The average DNA content for TX100 samples and PS20 samples was similar (1.3 ± 0.07 vs 1.3 ± 0.05 ng/mg; TX100 vs PS20, p = ns). The importance of cuticle removal was tested by removing hexanes from the protocol. Groups that included the cuticle removal step exhibited an average reduction in DNA content of approximately 91.7%, and groups that omitted the cuticle removal step exhibited an average reduction of approximately 90.3% (p = ns), suggesting that the omission of the cuticle removal step did not impede decellularization. Lastly, primary bovine satellite cells (PBSCs) were cultured for 7 days (d) on the surface of spinach leaves decellularized using the REG protocol. After the 7 d incubation period, PBSCs grown on the surface of REG scaffolds had an average viability of approximately 97.4%. These observations suggest that the REG protocol described in this study is an effective decellularization method, more closely adhering to food safety guidelines, that could be implemented in lab grown meat and alternative protein products.

Impact of Ultrasonication on African Oil Bean (Pentaclethra macrophylla Benth) Protein Extraction and Properties

African oil bean (Pentaclethra macrophylla Benth) is an underutilised edible oil seed that could represent a sustainable protein source. In this study, the impact of ultrasonication on the extraction efficiency and properties of protein from African oil bean (AOB) seeds was evaluated. The increase in the duration of extraction favoured the extraction of AOB proteins. This was observed by an increase in extraction yield from 24% to 42% (w/w) when the extraction time was increased from 15 min to 60 min. Desirable properties were observed in extracted AOB proteins; the amino acid profile of protein isolates revealed higher ratios of hydrophobic to hydrophilic amino acids compared to those of the defatted seeds, suggesting alterations in their functional properties. This was also supported by the higher proportion of hydrophobic amino acids and high surface hydrophobicity index value (3813) in AOB protein isolates. The foaming capacity of AOB proteins was above 200%, with an average foaming stability of 92%. The results indicate that AOB protein isolates can be considered promising food ingredients and could help stimulate the growth of the food industry in tropical Sub-Saharan regions where AOB seeds thrive.

Mild Fractionation for More Sustainable Food Ingredients

With the rising problems of food shortages, energy costs, and raw materials, the food industry must reduce its environmental impact. We present an overview of more resource-efficient processes to produce food ingredients, describing their environmental impact and the functional properties obtained. Extensive wet processing yields high purities but also has the highest environmental impact, mainly due to heating for protein precipitation and dehydration. Milder wet alternatives exclude, for example, low pH-driven separation and are based on salt precipitation or water only. Drying steps are omitted during dry fractionation using air classification or electrostatic separation. Benefits of milder methods are enhanced functional properties. Therefore, fractionation and formulation should be focused on the desired functionality instead of purity. Environmental impact is also strongly reduced by milder refining. Antinutritional factors and off-flavors remain challenges in more mildly produced ingredients. The benefits of less refining motivate the increasing trend toward mildly refined ingredients.

Turning Food Protein Waste into Sustainable Technologies

For each kilogram of food protein wasted, between 15 and 750 kg of CO2 end up in the atmosphere. With this alarming carbon footprint, food protein waste not only contributes to climate change but also significantly impacts other environmental boundaries, such as nitrogen and phosphorus cycles, global freshwater use, change in land composition, chemical pollution, and biodiversity loss. This contrasts sharply with both the high nutritional value of proteins, as well as their unique chemical and physical versatility, which enable their use in new materials and innovative technologies. In this review, we discuss how food protein waste can be efficiently valorized not only by reintroduction into the food chain supply but also as a template for the development of sustainable technologies by allowing it to exit the food-value chain, thus alleviating some of the most urgent global challenges. We showcase three technologies of immediate significance and environmental impact: biodegradable plastics, water purification, and renewable energy. We discuss, by carefully reviewing the current state of the art, how proteins extracted from food waste can be valorized into key players to facilitate these technologies. We furthermore support analysis of the extant literature by original life cycle assessment (LCA) examples run ad hoc on both plant and animal waste proteins in the context of the technologies considered, and against realistic benchmarks, to quantitatively demonstrate their efficacy and potential. We finally conclude the review with an outlook on how such a comprehensive management of food protein waste is anticipated to transform its carbon footprint from positive to negative and, more generally, have a favorable impact on several other important planetary boundaries.

Current Status and Nutritional Value of Green Leaf Protein

Green leaf biomass is one of the largest underutilized sources of nutrients worldwide. Whether it is purposely cultivated (forage crops, duckweed) or upcycled as a waste stream from the mass-produced agricultural crops (discarded leaves, offcuts, tops, peels, or pulp), the green biomass can be established as a viable alternative source of plant proteins in food and feed processing formulations. Rubisco is a major component of all green leaves, comprising up to 50% of soluble leaf protein, and offers many advantageous functional features in terms of essential amino acid profile, reduced allergenicity, enhanced gelation, foaming, emulsification, and textural properties. Nutrient profiles of green leaf biomass differ considerably from those of plant seeds in protein quality, vitamin and mineral concentration, and omega 6/3 fatty acid profiles. Emerging technological improvements in processing fractions, protein quality, and organoleptic profiles will enhance the nutritional quality of green leaf proteins as well as address scaling and sustainability challenges associated with the growing global demand for high quality nutrition.

Protein-Based Fat Replacers: A Focus on Fabrication Methods and Fat-Mimic Mechanisms

The increasing occurrence of obesity and other non-communicable diseases has shifted the human diet towards reduced calorie intake. This drives the market to develop low-fat/non-fat food products with limited deterioration of textural properties. Thus, developing high-quality fat replacers which can replicate the role of fat in the food matrix is essential. Among all the established types of fat replacers, protein-based ones have shown a higher compatibility with a wide range of foods with limited contribution to the total calories, including protein isolate/concentrate, microparticles, and microgels. The approach to fabricating fat replacers varies with their types, such as thermal-mechanical treatment, anti-solvent precipitation, enzymatic hydrolysis, complexation, and emulsification. Their detailed process is summarized in the present review with a focus on the latest findings. The fat-mimic mechanisms of fat replacers have received little attention compared to the fabricating methods; attempts are also made to explain the underlying principles of fat replacers from the physicochemical prospect. Finally, a future direction on the development of desirable fat replacers in a more sustainable way was also pointed out.

Green Biomass-Based Protein for Sustainable Feed and Food Supply: An Overview of Current and Future Prospective

It is necessary to develop and deploy novel protein production to allow the establishment of a sustainable supply for both humans and animals, given the ongoing expansion of protein demand to meet the future needs of the increased world population and high living standards. In addition to plant seeds, green biomass from dedicated crops or green agricultural waste is also available as an alternative source to fulfill the protein and nutrient needs of humans and animals. The development of extraction and precipitation methods (such as microwave coagulation) for chloroplast and cytoplasmic proteins, which constitute the bulk of leaf protein, will allow the production of leaf protein concentrates (LPC) and protein isolates (LPI). Obtained LPC serves as a sustainable alternative source of animal-based protein besides being an important source of many vital phytochemicals, including vitamins and substances with nutritional and pharmacological effects. Along with it, the production of LPC, directly or indirectly, supports sustainability and circular economy concepts. However, the quantity and quality of LPC largely depend on several factors, including plant species, extraction and precipitation techniques, harvest time, and growing season. This paper provides an overview of the history of green biomass-derived protein from the early green fodder mill concept by Károly Ereky to the state-of-art of green-based protein utilization. It highlights potential approaches for enhancing LPC production, including dedicated plant species, associated extraction methods, selection of optimal technologies, and best combination approaches for improving leaf protein isolation.

Uptake of Pharmaceutical Pollutants and Their Metabolites from Soil Fertilized with Manure to Parsley Tissues

Manure is a major source of soil and plant contamination with veterinary drugs residues. The aim of this study was to evaluate the uptake of 14 veterinary pharmaceuticals by parsley from soil fertilized with manure. Pharmaceutical content was determined in roots and leaves. Liquid chromatography coupled with tandem mass spectrometry was used for targeted analysis. Screening analysis was performed to identify transformation products in the parsley tissues. A solid-liquid extraction procedure was developed combined with solid-phase extraction, providing recoveries of 61.9–97.1% for leaves and 51.7–95.6% for roots. Four analytes were detected in parsley: enrofloxacin, tylosin, sulfamethoxazole, and doxycycline. Enrofloxacin was detected at the highest concentrations (13.4–26.3 ng g⁻¹). Doxycycline accumulated mainly in the roots, tylosin in the leaves, and sulfamethoxazole was found in both tissues. 14 transformation products were identified and their distribution were determined. This study provides important data on the uptake and transformation of pharmaceuticals in plant tissues.

Health Benefits of Cereal Grain- and Pulse-Derived Proteins

Pulses and whole grains are considered staple foods that provide a significant amount of calories, fibre and protein, making them key food sources in a nutritionally balanced diet. Additionally, pulses and whole grains contain many bioactive compounds such as dietary fibre, resistant starch, phenolic compounds and mono- and polyunsaturated fatty acids that are known to combat chronic disease. Notably, recent research has demonstrated that protein derived from pulse and whole grain sources contains bioactive peptides that also possess disease-fighting properties. Mechanisms of action include inhibition or alteration of enzyme activities, vasodilatation, modulation of lipid metabolism and gut microbiome and oxidative stress reduction. Consumer demand for plant-based proteins has skyrocketed primarily based on the perceived health benefits and lower carbon footprint of consuming foods from plant sources versus animal. Therefore, more research should be invested in discovering the health-promoting effects that pulse and whole grain proteins have to offer.

Extraction, nutrition, functionality and commercial applications of canola proteins as an underutilized plant protein source for human nutrition

Concerns about sustainability and nutrition security have encouraged the food sector to replace animal proteins in food formulations with underutilized plant protein sources and their co-products. In this scenario, canola protein-rich materials produced after oil extraction, including canola cold-pressed cakes and meals, offer an excellent opportunity, considering their nutritional advantages such as a well-balanced amino acid composition and their potential bioactivity. However, radical differences among major proteins (i.e., cruciferin and napin) in terms of the physicochemical properties, and the presence of a wide array of antinutritional factors in canola, impede the production of a highly pure protein extract with a reasonable extraction yield. In this manuscript, principles regarding the extraction methods applicable for the production of canola protein concentrates and isolates are explored in detail. Alkaline and salt extraction methods are presented as the primary isolation methods, which result in cruciferin-rich and napin-rich isolates with different nutritional and functional properties. Since a harsh alkaline condition would result in an inferior functionality in protein isolates, strategies are recommended to reduce the required solvent alkalinity, including using a combination of salt and alkaline and employing membrane technologies, application of proteases and carbohydrases to facilitate the protein solubilization from biomass, and novel green physical methods, such as ultrasound and microwave treatments. In terms of the commercialization progress, several canola protein products have received a GRAS notification so far, which facilitates their incorporation in food formulations, such as bakery, beverages, salad dressings, meat products and meat analogues, and dairies.

Biomass Pre-Extraction as a Versatile Strategy to Improve Biorefinery Feedstock Flexibility, Sugar Yields, and Lignin Purity

Feedstock flexibility is highly advantageous for the viability of (solvent-based) biorefineries but comes with the considerable challenge of having to cope with the varying nature and typically high abundance of nonlignocellulose compounds in the most readily available residual biomass streams. Here, we demonstrate that mild aqueous acetone organosolv fractionation of various complex lignocellulosic raw materials (roadside grass, wheat straw, birch branches, almond shells, and a mixed stream thereof) is indeed negatively affected by these compounds and present a versatile strategy to mitigate this bottleneck in biorefining. A biomass pre-extraction approach has been developed to remove the detrimental extractives with (aqueous) acetone prior to fractionation. Pre-extraction removed organic extractives as well as minerals, primarily reducing acid dose requirements for fractionation and loss of hemicellulose sugars by degradation and improved the purity of the isolated lignin. We show how pre-extraction affects the effectiveness of the biorefinery process, including detailed mass balances for pretreatment, downstream processing, and product characteristics, and how it affects solvent and energy use with a first conceptual process design. The integrated biorefining approach allows for the improved compatibility of biorefineries with sustainable feedstock supply chains, enhanced biomass valorization (i.e., isolation of bioactive compounds from the extract), and more effective biomass processing with limited variation in product quality.

Structural and chemical changes induced by temperature and pH hinder the digestibility of whey proteins

In the food and feed industry, protein extraction is commonly performed under acid or basic conditions, combined with heat, in order to increase the extraction yield. Under severe processing conditions, proteins may undergo molecular modifications. Here, the effects of heating (30, 60, 90 °C) at different pH values (2, 7, 9, 11, 13) were evaluated on commercial whey proteins, used as a simplified protein model. The main structure and chemical modifications concerning protein aggregation, hydrolysis, insolubilization, amino acid degradation and racemization were investigated in detail. Using in vitro static models, the degree of protein hydrolysis and the released peptides were determined after the digestive process. Accumulation of molecular modifications was mostly observed after basic pH and high temperatures treatments, together with a marked decrease and modification of the digestibility profile. Instead, protein digestibility increased in neutral and acidic conditions in a temperature-dependent manner, even if some modification in the structure occurs.

Ultraprocessed food consumption and kidney function decline in a population-based cohort in the Netherlands

BACKGROUND

Ultraprocessing makes food products more convenient, appealing, and profitable. Recent studies show that high ultraprocessed food (UPF) intake is associated with cardiometabolic diseases.

OBJECTIVES

The aim of this study is to investigate the association between UPF consumption and risks of kidney function decline in the general population.

METHODS

In a prospective, general population-based Lifelines cohort from Northern Netherlands, 78,346 participants free of chronic kidney disease (CKD) at baseline responded to a 110-item FFQ. We used a multivariable regression analysis to study the associations of the proportion (in grams/day) of UPFs in the total diet with a composite kidney outcome [incident CKD or a ≥30% estimated glomerular filtration rate (eGFR) decline relative to baseline] and annual change in eGFR.

RESULTS

On average, 37.7% of total food intake came from UPFs. After 3.6 ± 0.9 years of follow-up, 2470 participants (3.2%) reached the composite kidney outcome. Participants in the highest quartile of UPF consumption were associated with a higher risk of the composite kidney outcome (OR, 1.27; 95% CI, 1.09-1.47; P = 0.003) compared with those in the lowest quartile, regardless of their macro- or micronutrient intake or diet quality. Participants in the highest quartile had a more rapid eGFR decline (β, -0.17; 95% CI, -0.23 to -0.11; P < 0.001) compared with those in the lowest quartile. Associations were generally consistent across different subgroups.

CONCLUSIONS

Higher UPF consumption was associated with a higher risk of a composite kidney outcome (incident CKD or ≥30% eGFR decline) and a more rapid eGFR decline in the general population, independent of confounders and other dietary indices.

Ultrasound-assisted processing: Science, technology and challenges for the plant-based protein industry

The present-day consumer is not only conscious of the relationship between food consumption and positive health, but also keen on environmental sustainability. Thus, the demand for plant-based proteins, which are associated with nutrition and environmental sustainability. However, the plant-based protein industry still demands urgent innovation due to the low yield and long extraction time linked with traditional extraction methods. Although ultrasound is an eco-innovative technique, there exist limited data regarding its impact with plant-based protein. In this paper, the scientific principles of ultrasonication with regards to its application in plant-based protein research were reviewed. After comparing the cavitational and shearing impacts of different ultrasonic parameters, the paper further reviewed its effects on extracted protein characteristics and techno-functional properties. Additionally, current technological challenges and future perspectives of ultrasonication for the plant-based protein industry were also discussed. In summary, this review does not only present the novelty and environmental sustainability of ultrasound as a plant-based protein assisted-extraction method, but also highlights on the correlation between protein source, structure and subsequent functional properties which are important crucial factors for maximum application of ultrasound in the growing plant-based protein market.

Biorefinery of Green Biomass─How to Extract and Evaluate High Quality Leaf Protein for Food?

There is a growing need for protein for both feed and food in order to meet future demands. It is imperative to explore and utilize novel protein sources such as protein from leafy plant material, which contains high amounts of the enzyme ribulose-1,5-biphosphate carboxylase/oxygenase (RuBisCo). Leafy crops such as grasses and legumes can in humid climate produce high protein yields in a sustainable way when compared with many traditional seed protein crops. Despite this, very little RuBisCo is utilized for foods because proteins in the leaf material has a low accessibility to monogastrics. In order to utilize the leaf protein for food purposes, the protein needs to be extracted from the fiber rich leaf matrix. This conversion of green biomass to valuable products has been labeled green biorefinery. The green biorefinery may be tailored to produce different products, but in this Review, the focus is on production of food-grade protein. The existing knowledge on the extraction, purification, and concentration of protein from green biomass is reviewed. Additionally, the quality and potential application of the leaf protein in food products and side streams from the green biorefinery will be discussed along with possible uses of side streams from the protein production.

High throughput method development and optimised production of leaf protein concentrates with potential to support the agri-industry

Invasive plants offer an interesting and unconventional source of protein and the considerable investment made towards their eradication can potentially be salvaged through their revalorisation. To identify viable sources, effective and high-throughput screening methods are required, as well as efficient procedures to isolate these components. Rigorous assessment of low-cost, high-throughput screening assays for total sugar, phenolics and protein was performed, and ninhydrin, Lever and Fast Blue assays were found to be most suitable owing to high reliability scores and false positive errors less than 1%. These assays were used to characterise invasive Scottish plants such as Gorse (Ulex europeans), Broom (Cystisus scoparius) and Fireweed (Chamaenerion angustifolium). Protein extraction (alkali-, heat- and enzyme assisted) were tested on these plants, and further purification (acid and ethanol precipitation, as well as ultrafiltration) procedures were tested on Gorse, based on protein recovery values. Cellulase treatment and ethanol precipitation gave the highest protein recovery (64.0 ± 0.5%) and purity (96.8 ± 0.1%) with Gorse. The amino acid profile of the purified protein revealed high levels of essential amino acids (34.8 ± 0.0%). Comparison of results with preceding literature revealed a strong association between amino acid profiles and overall protein recovery with the extraction method employed. The final purity of the protein concentrates was closely associated to the protein content of the initial plant mass. Leaf protein extraction technology can effectively raise crop harvest indices, revalorise underutilised plants and waste streams.