Bioreduction and biocrystallization of palladium by Desulfovibrio desulfuricans NCIMB 8307

Precious Metal Recovery from Wastewater Using Bio-Based Techniques

The recovery of metals from waste material has been on the increase in the past few years due to a number of reasons such as supporting the diversification of metal supply resources. In addition, the alternative use of the waste material for metal recovery can add to the main production line, boosting production throughput and profitability thus, allowing companies to sustain their activities during times of low commodity prices. While there has been a lot of research and interest in the recovery of precious metals such as platinum group metals (PGMs), Au, and Ag from solid waste material, there has been limited focus on the recovery of these value metals from wastewater. This is mostly related to challenges associated with finding cost-effective technologies that can recover these metals from solutions of low metal concentrations. In recent years, bio-based technologies have, however, become established as potential alternatives to traditional techniques in the treatment of wastewater due to their ability to recover metals from solutions of low concentrations. While wastewater might be characterized by some significant value metal content, it also contains other components that have potential economic value if recovered or converted to by-products. Such an approach may not only provide an opportunity for extraction of metal resources from wastewater but also contributes toward the circular economy. This chapter presents insights into precious metal recovery from wastewater using bio-based technologies, compares such an approach to the traditional techniques, explores the recovery of other value-added products and finally considers some of the challenges associated with the large-scale application of the bio-based technologies.

Formation of biologically influenced palladium microstructures by Desulfovibrio desulfuricans and Desulfovibrio ferrophilus IS5

A range of Desulfovibrio spp. can reduce metal ions to form metallic nanoparticles that remain attached to their surfaces. The bioreduction of palladium (Pd) has been given considerable attention due to its extensive use in areas of catalysis and electronics and other technological domains. In this study we report, for the first time, evidence for Pd(II) reduction by the highly corrosive Desulfovibrio ferrophilus IS5 strain to form surface attached Pd nanoparticles, as well as rapid formation of Pd(0) coated microbial nanowires. These filaments reached up to 8 µm in length and led to the formation of a tightly bound group of interconnected cells with enhanced ability to attach to a low carbon steel surface. Moreover, when supplied with high concentrations of Pd (≥ 100 mmol Pd(II) g^-1 dry cells), both Desulfovibrio desulfuricans and D. ferrophilus IS5 formed bacteria/Pd hybrid porous microstructures comprising millions of cells. These three-dimensional structures reached up to 3 mm in diameter with a dose of 1200 mmol Pd(II) g^-1 dry cells. Under suitable hydrodynamic conditions during reduction, two-dimensional nanosheets of Pd metal were formed that were up to several cm in length. Lower dosing of Pd(II) for promoting rapid synthesis of metal coated nanowires and enhanced attachment of cells onto metal surfaces could improve the efficiency of various biotechnological applications such as microbial fuel cells. Formation of biologically stimulated Pd microstructures could lead to a novel way to produce metal scaffolds or nanosheets for a wide variety of applications.

Inhibition of Sulfate Reduction and Cell Division by Desulfovibrio desulfuricans Coated in Palladium Metal

The growth of sulfate-reducing bacteria (SRB) and associated hydrogen sulfide production can be problematic in a range of industries such that inhibition strategies are needed. A range of SRB can reduce metal ions, a strategy that has been utilized for bioremediation, metal recovery, and synthesis of precious metal catalysts. In some instances, the metal remains bound to the cell surface, and the impact of this coating on bacterial cell division and metabolism has not previously been reported. In this study, Desulfovibrio desulfuricans cells (1g dry weight) enabled the reduction of up to 1500 mmol (157.5 g) palladium (Pd) ions, resulting in cells being coated in approximately 1 μm of metal. Thickly coated cells were no longer able to metabolize or divide, ultimately leading to the death of the population. Increasing Pd coating led to prolonged inhibition of sulfate reduction, which ceased completely after cells had been coated with 1200 mmol Pd g-1 dry cells. Less Pd nanoparticle coating permitted cells to carry out sulfate reduction and divide, allowing the population to recover over time as surface-associated Pd diminished. Overcoming inhibition in this way was more rapid using lactate as the electron donor, compared to formate. When using formate as an electron donor, preferential Pd(II) reduction took place in the presence of 100 mM sulfate. The inhibition of important metabolic pathways using a biologically enabled casing in metal highlights a new mechanism for the development of microbial control strategies. IMPORTANCE Microbial reduction of sulfate to hydrogen sulfide is highly undesirable in several industrial settings. Some sulfate-reducing bacteria are also able to transform metal ions in their environment into metal phases that remain attached to their outer cell surface. This study demonstrates the remarkable extent to which Desulfovibrio desulfuricans can be coated with locally generated metal nanoparticles, with individual cells carrying more than 100 times their mass of palladium metal. Moreover, it reveals the effect of metal coating on metabolism and replication for a wide range of metal loadings, with bacteria unable to reduce sulfate to sulfide beyond a specific threshold. These findings present a foundation for a novel means of modulating the activity of sulfate-reducing bacteria.

Biotechnological synthesis of Pd-based nanoparticle catalysts

Palladium metal nanoparticles are excellent catalysts used industrially for reactions such as hydrogenation and Heck and Suzuki C-C coupling reactions. However, the global demand for Pd far exceeds global supply, therefore the sustainable use and recycling of Pd is vital. Conventional chemical synthesis routes of Pd metal nanoparticles do not meet sustainability targets due to the use of toxic chemicals, such as organic solvents and capping agents. Microbes are capable of bioreducing soluble high oxidation state metal ions to form metal nanoparticles at ambient temperature and pressure, without the need for toxic chemicals. Microbes can also reduce metal from waste solutions, revalorising these waste streams and allowing the reuse of precious metals. Pd nanoparticles supported on microbial cells (bio-Pd) can catalyse a wide array of reactions, even outperforming commercial heterogeneous Pd catalysts in several studies. However, to be considered a viable commercial option, the intrinsic activity and selectivity of bio-Pd must be enhanced. Many types of microorganisms can produce bio-Pd, although most studies so far have been performed using bacteria, with metal reduction mediated by hydrogenase or formate dehydrogenase enzymes. Dissimilatory metal-reducing bacteria (DMRB) possess additional enzymes adapted for extracellular electron transport that potentially offer greater control over the properties of the nanoparticles produced. A recent and important addition to the field are bio-bimetallic nanoparticles, which significantly enhance the catalytic properties of bio-Pd. In addition, systems biology can integrate bio-Pd into biocatalytic processes, and processing techniques may enhance the catalytic properties further, such as incorporating additional functional nanomaterials. This review aims to highlight aspects of enzymatic metal reduction processes that can be bioengineered to control the size, shape, and cellular location of bio-Pd in order to optimise its catalytic properties.

Prompting the FDH/Hases-based electron transfers during Pt(IV) reduction mediated by bio-Pd(0)

Due to the excellent hydrogen affinity and high conductivity, palladium nanoparticles (Pd NPs) were considered as a potential strategy to regulate bacterial electron transfer and energy metabolism. Herein, Citrobacter freundii JH, capable of in-situ biosynthesizing Pd(0) NPs, was employed to promote Pt(IV) reduction. The results showed that the Pt(IV) reduction to Pt(II) was accomplished mainly via the flavins-mediated extracellular electron transfer (EET) process, while Pt(II) reduction to Pt(0) was limit step, and proceeded via two intracellular respiratory chains, including FDH/Hases-based short chain (S-chain) and typical CoQ-involved long respiratory chain (L-chain). Noteworthily, the incorporation of Pd(0) NPs mainly diverted the electrons to S-chain (as high as 71.7%-73.4%) by improving the hydrogenases (Hases) activity. Furthermore, Pd(0) NPs could stimulate the secreting of flavins and the combination between flavins and cytochrome c (c-Cyt), which converted electron transfer manner of L-chain. Additionally, Pd(0) NPs might also act as alternative proton channels to improve the energy metabolism. These findings provided significant insights into the promotion by Pd(0) NPs in terms of electron generation, electron consumption and proton translocation.

Comparative analysis of biological versus chemical synthesis of palladium nanoparticles for catalysis of chromium (VI) reduction

The discharge of hexavalent chromium [Cr(VI)] from several anthropogenic activities leads to environmental pollution. In this study, we explore a simple yet cost effective method for the synthesis of palladium (Pd) nanoparticles for the treatment of Cr(VI). The presence of elemental Pd [Pd(0)] was confirmed by scanning electron microscope (SEM), electron dispersive spectroscopy and X-ray diffraction (XRD). We show here that the biologically synthesized nanoparticles (Bio-PdNPs) exhibit improved catalytic reduction of Cr(VI) due to their size being smaller and also being highly dispersed as compared to chemically synthesized nanoparticles (Chem-PdNPs). The Langmuir–Hinshelwood mechanism was successfully used to model the kinetics. Using this model, the Bio-PdNPs were shown to perform better than Chem-PdNPs due to the rate constant (k_bio = 6.37 mmol s⁻¹ m⁻²) and Cr(VI) adsorption constant (K_Cr(VI),bio = 3.11 × 10⁻² L mmol⁻¹) of Bio-PdNPs being higher than the rate constant (k_chem = 3.83 mmol s⁻¹ m⁻²) and Cr(VI) adsorption constant (K_Cr(VI),chem = 1.14 × 10⁻² L mmol⁻¹) of Chem-PdNPs. In addition, product inhibition by trivalent chromium [Cr(III)] was high in Chem-PdNPs as indicated by the high adsorption constant of Cr(III) in Chem-PdNPs of K_Cr(III),chem = 52.9 L mmol⁻¹ as compared to the one for Bio-PdNPs of K_Cr(III),bio = 2.76 L mmol⁻¹.

Microbe-Mediated Biosynthesis of Nanoparticles: Applications and Future Prospects

Nanotechnology is the science of nano-sized particles/structures (~100 nm) having a high surface-to-volume ratio that can modulate the physical, chemical and biological properties of the chemical compositions. In last few decades, nanoscience has attracted the attention of the scientific community worldwide due to its potential uses in the pharmacy, medical diagnostics and disease treatment, energy, electronics, agriculture, chemical and space industries. The properties of nanoparticles (NPs) are size and shape dependent. These characteristic features of nanoparticles can be explored for various other applications such as computer transistors, chemical sensors, electrometers, memory schemes, reusable catalysts, biosensing, antimicrobial activity, nanocomposites, medical imaging, tumor detection and drug delivery. Therefore, synthesizing nanoparticles of desired size, structure, monodispersity and morphology is crucial for the aforementioned applications. Recent advancements in nanotechnology aim at the synthesis of nanoparticles/materials using reliable, innoxious and novel ecofriendly techniques. In contrast to the traditional methods, the biosynthesis of nanoparticles of a desired nature and structure using the microbial machinery is not only quicker and safer but more environmentally friendly. Various microbes, including bacteria, actinobacteria, fungi, yeast, microalgae and viruses, have recently been explored for the synthesis of metal, metal oxide and other important NPs through intracellular and extracellular processes. Some bacteria and microalgae possess specific potential to fabricate distinctive nanomaterials such as exopolysaccharides, nanocellulose, nanoplates and nanowires. Moreover, their ability to synthesize nanoparticles can be enhanced using genetic engineering approaches. Thus, the use of microorganisms for synthesis of nanoparticles is unique and has a promising future. The present review provides explicit information on different strategies for the synthesis of nanoparticles using microbial cells; their applications in bioremediation, agriculture, medicine and diagnostics; and their future prospects.

Identification of genes responsible for reducing palladium ion in Escherichia coli

Palladium (Pd) is commonly used as a catalyst for automobiles and electronic devices, and a reliable source of Pd is required for continued commercial applications. Biomineralization has attracted attention as an inexpensive and eco-friendly recycling approach for a continued supply of Pd. Escherichia coli is one of the best hosts for collecting Pd because it grows rapidly and requires an inexpensive minimal medium. Although E. coli can reduce Pd ions, the mechanism of reduction has not been thoroughly investigated. In this study, we investigated the genes involved in the reduction of Pd ions in E. coli. A gene responsible for the reduction of Pd ions was identified from approximately 4000 genes, other than essential genes, by using the single-gene-knockout library. The rate of reducing Pd ions by E. coli cells was evaluated. Among the investigated single-gene-knockout strains, 7 strains including the gene related to membrane transport, transcriptional regulation, and metabolic enzyme promote the reduction of Pd ions, and 73 strains including the genes related to formate metabolism and molybdopterin synthesis repress the reduction of Pd ions. Our results may provide a new perspective for the improvement of the bioreduction of minor metals.

Insights into palladium nanoparticles produced by Shewanella oneidensis MR-1: Roles of NADH dehydrogenases and hydrogenases

Biologically synthesized palladium nanoparticles (bio-Pd) have attracted considerable interest as promising green catalysts for environmental remediation. However, the mechanisms by which microorganisms produce bio-Pd remain unclear. In the present study, we investigated the roles of Shewanella oneidensis MR-1 and its NADH dehydrogenases and hydrogenases (HydA and HyaB) in bio-Pd production using formate as the electron donor. The roles of NADH dehydrogenases and hydrogenases were studied by inhibiting NADH dehydrogenases and using hydrogenase mutants (ΔhydA, ΔhyaB, and ΔhydAΔhyaB), respectively. The results showed ~97% reduction of palladium by S. oneidensis MR-1 after 24 h using 250 μM palladium and 500 μM formate. Electron microscopy images showed the presence of bio-Pd on both the outer and cytoplasmic membranes of S. oneidensis MR-1. However, the inhibition of NADH dehydrogenases in S. oneidensis MR-1 resulted in only ~61% reduction of palladium after 24 h, and bio-Pd were not found on the outer membrane. The mutants lacking one or two hydrogenases removed 91-96% of palladium ions after 24 h and showed more cytoplasmic bio-Pd but less periplasmic bio-Pd. To the best of our knowledge, this is the first study to demonstrate the role of NADH dehydrogenases of S. oneidensis MR-1 in the formation of bio-Pd on the outer membrane. It also demonstrates that the hydrogenases (especially HyaB) of S. oneidensis MR-1 contribute to the formation of bio-Pd in the periplasmic space. This study provides mechanistic insights into the production of biogenic metal nanoparticles towards their possible use in industrial and environmental applications.

Palladium Nanoparticles Fabricated by Green Chemistry: Promising Chemotherapeutic, Antioxidant and Antimicrobial Agents

Palladium nanoparticles (Pd NPs) showed great potential in biomedical applications because of their unique physicochemical properties. Various conventional physical and chemical methods have been used for the synthesis of Pd NPs. However, these methods include the use of hazardous reagents and reaction conditions, which may be toxic to health and to the environment. Thus, eco-friendly, rapid, and economic approaches for the synthesis of Pd NPs have been developed. Bacteria, fungi, yeast, seaweeds, plants, and plant extracts were used to prepare Pd NPs. This review highlights the most recent studies for the biosynthesis of Pd NPs, factors controlling their synthesis, and their potential biomedical applications.

Synthesis of Biogenic Palladium Nanoparticles Using Citrobacter sp. for Application as Anode Electrocatalyst in a Microbial Fuel Cell

Palladium (Pd) is a cheap and effective electrocatalyst that is capable of replacing platinum (Pt) in various applications. However, the problem in using chemically synthesized Pd nanoparticles (PdNPs) is that they are mostly fabricated using toxic chemicals under severe conditions. In this study, we present a more environmentally-friendly process in fabricating biogenic Pd nanoparticles (Bio-PdNPs) using Citrobacter sp. isolated from wastewater sludge. Successful fabrication of Bio-PdNPs was achieved under anaerobic conditions at pH six and a temperature of 30 °C using sodium formate (HCOONa) as an electron donor. Citrobacter sp. showed biosorption capabilities with no enzymatic contribution to Pd(II) uptake during absence of HCOONa in both live and dead cells. Citrobacter sp. live cells also displayed high enzymatic contribution to the removal of Pd(II) by biological reduction. This was confirmed by Scanning Electron Microscope (SEM), Electron Dispersive Spectroscopy (EDS), and X-ray Diffraction (XRD) characterization, which revealed the presence Bio-PdNPs deposited on the bacterial cells. The bio-PdNPs successfully enhanced the anode performance of the Microbial Fuel Cell (MFC). The MFC with the highest Bio-PdNPs loading (4 mg Bio-PdNP/cm2) achieved a maximum power density of 539.3 mW/m3 (4.01 mW/m2) and peak voltage of 328.4 mV.

Metalloid Reductase Activity Modified by a Fused Se0 Binding Peptide

A selenium nanoparticle binding peptide was isolated from a phage display library and genetically fused to a metalloid reductase that reduces selenite (SeO₃^2-) to a Se⁰ nanoparticle (SeNP) form. The fusion of the Se binding peptide to the metalloid reductase regulates the size of the resulting SeNP to ∼35 nm average diameter, where without the peptide, SeNPs grow to micron sized polydisperse precipitates. The SeNP product remains associated with the enzyme/peptide fusion. The Se binding peptide fusion to the enzyme increases the enzyme's SeO₃^2- reductase activity. Size control of particles was diminished if the Se binding peptide was only added exogenously to the reaction mixture. The enzyme-peptide construct shows preference for binding smaller SeNPs. The peptide-SeNP interaction is attributed to His based ligation that results in a peptide conformational change on the basis of Raman spectroscopy.

Electron transfer involved in bio-Pd (0) synthesis by Citrobacter freundii at different growth phases

Gram-negative Citrobacter freundii with high Pd (II) reduction capacity was isolated from electroplating wastewater, and the electron transfer involved in Pd (II) bio-reduction by C. freundii JH was investigated in phosphate buffer saline solution with sodium formate as sole electron donor under anaerobic condition. FTIR spectra indicated that hydroxyl and amine groups on cell wall participated Pd (II) bio-sorption. TEM, XRD, XPS results confirmed that Pd (0) nanoparticles (NPs) could be bio-synthesized intra/extracellularly. Meanwhile, pH turn-over were observed owing to the reduction of cytochrome c (c-Cyt) in bio-reduction process. EPR spectra indicated that free radicals (OH) was generated from high concentration Pd (II), which would cause seriously damage to cell. Despite of the lower tolerance to Pd (II), the cells at logarithmic phase exhibited higher Pd (II) reduction capacity (72.21%) than that at stationary phase (56.21%), which might be related to the relatively stronger proton motive force (PMF) created by the substrate oxidation and the electron transfer, as evidenced by electrochemical experiments (CV, DPV, amperometric I-t curves) and protein denaturalization experiments. Additionally, c-Cyt and riboflavin were confirmed to be important participants in electron transfer. Finally, a putative synthesis mechanism of Pd (0)-NPs was deduced. This study contributed to further understanding the electron transfer in Pd (II) reduction, and provided more information for the bio-synthetic of metal nanoparticles.

A review of the valorization and management of industrial spent catalyst waste in the context of sustainable practice: The case of the State of Kuwait in parallel to European industry

Industrial solid waste management encompasses a vital part of developed and developing countries strategies alike. It manages waste generated from vital industries and governs the hazardous waste generated as a major component of integrated waste management strategies. This article reviews the practices that govern the management approaches utilized in the developed world for industrial spent catalysts. It critically assesses the current situation of waste management within the developing world region focusing on the industrial waste component, in a novel attempt to crucially develop a strategy for a way forward based on best practices and future directions with major European industries. The review also draws parallels with European countries to compare their practices with those of the State of Kuwait, which rely solely on landfilling for the management of its industrial waste. Spent catalysts recovery methods are discussed at length covering conventional methods of valuable metals and chemicals recovery (e.g., hydrometallurgical, solid-liquid and liquid-liquid extraction) as well as biological recovery methods. A major gap exists within regulations that govern the practice of managing industrial waste in Kuwait, where it is essential to start regulating industries that generate spent catalysts in-view of encouraging the establishment of valorization industries for metal and chemical recovery. This will also create a sustainable practice within state borders, and can reduce the environmental impact of landfilling such waste in Kuwait.

Shotgun proteomic analysis of nanoparticle-synthesizing Desulfovibrio alaskensis in response to platinum and palladium

Platinum and palladium are much sought-after metals of critical global importance in terms of abundance and availability. At the nano-scale these metals are of even higher value due to their catalytic abilities for industrial applications. Desulfovibrio alaskensis is able to capture ionic forms of both of these metals, reduce them and synthesize elemental nanoparticles. Despite this ability, very little is known about the biological pathways involved in the formation of these nanoparticles. Proteomic analysis of D. alaskensis in response to platinum and palladium has highlighted those proteins involved in both the reductive pathways and the wider stress-response system. A core set of 13 proteins was found in both treatments and consisted of proteins involved in metal transport and reduction. There were also seven proteins that were specific to either platinum or palladium. Overexpression of one of these platinum-specific genes, a NiFe hydrogenase small subunit (Dde_2137), resulted in the formation of larger nanoparticles. This study improves our understanding of the pathways involved in the metal resistance mechanism of Desulfovibrio and is informative regarding how we can tailor the bacterium for nanoparticle production, enhancing its application as a bioremediation tool and as a way to capture contaminant metals from the environment.

Production of highly catalytic, archaeal Pd(0) bionanoparticles using Sulfolobus tokodaii

The thermo-acidophilic archaeon, Sulfolobus tokodaii, was utilized for the production of Pd(0) bionanoparticles from acidic Pd(II) solution. Use of active cells was essential to form well-dispersed Pd(0) nanoparticles located on the cell surface. The particle size could be manipulated by modifying the concentration of formate (as electron donor; e-donor) and by addition of enzymatic inhibitor (Cu²⁺) in the range of 14-63 nm mean size. Since robust Pd(II) reduction progressed in pre-grown S. tokodaii cells even in the presence of up to 500 mM Cl^-, it was possible to conversely utilize the effect of Cl^- to produce even finer and denser particles in the range of 8.7-15 nm mean size. This effect likely resulted from the increasing stability of anionic Pd(II)-chloride complex at elevated Cl^- concentrations, eventually allowing involvement of greater number of initial Pd(0) crystal nucleation sites (enzymatic sites). The catalytic activity [evaluated based on Cr(VI) reduction reaction] of Pd(0) bionanoparticles of varying particle size formed under different conditions were compared. The finest Pd(0) bionanoparticles obtained at 50 mM Cl^- (mean 8.7 nm; median 5.6 nm) exhibited the greatest specific Cr(VI) reduction rate, with four times higher catalytic activity compared to commercial Pd/C. The potential applicability of S. tokodaii cells in the recovery of highly catalytic Pd(0) nanoparticles from actual acidic chloride leachate was, thus, suggested.

The effect of biotic and abiotic environmental factors on Pd(II) adsorption and reduction by Bacillus megaterium Y-4

In this study, we screened a new aerobic bacterium (Bacillus megaterium Y-4) that can efficiently reduce Pd(II) with different electron donors. The best electron donor was sodium formate and the best reduction of Pd(II) were by log growth phase cells. The high removal capacity of Pd(II) (1658.3 mg/g) was obtained with 30 mg/L dry cell weight and 50 mg/L Pd (II) in the presence of 5 mM sodium formate. The removal amount of Pd(II) increased with initial Pd(II) concentrations ranging from 50 to 200 mg/L with 100 mg/L Pd(II) being completely removed by 148 mg/L dry cell weight in 6 h. The cell wall, periplasmic space and intracellular contents of B. megaterium Y-4 contains different kinds of enzymes for reducing Pd(II). In addition, the activity of extracellular and periplasmic enzymes was more sensitive to temperature than intracellular enzymes. XRD and XPS analysis revealed that the enzyme for reducing Pd(II) in B. megaterium Y-4 can tolerate a broad range of temperatures (20-60 °C) and pH (2.0-7.0) but was sensitive to oxygen. TEM analysis showed that biogenic palladium nanoparticles (Pd-NPs) were mainly distributed evenly in the periplasmic space of the live cells and were released from cells into aqueous solution, which reduced the toxicity of Pd(II), allowing Pd-NP recovery without cell destruction. B. megaterium Y-4 is a potential bacterium for efficient treatment and reclamation of Pd(II) pollution and formation of Pd-NPs.

Platinum(II) reduction to platinum nanoparticles in anaerobic sludge

BACKGROUND

To help mitigate future problems in the supply of platinum group metals (PGM) due to their scarcity and high demand, new recovery processes must be developed. Microbial processes are a great alternative for the recovery of PGM from waste since they are clean and environmentally friendly techniques. This research studied the microbial reduction of Pt(II) using an anaerobic granular sludge under different physiological conditions.

RESULTS

The anaerobic granular sludge was able to reduce Pt(II) to Pt(0) nanoparticles that were deposited intracellularly as well as extracellularly as confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. Hydrogen (H2) and formate supported the chemical reduction of Pt(II) while ethanol supported the biologically catalyzed reduction of Pt(II). Increasing initial concentrations of Pt(II), ethanol or biomass were each shown to increase the Pt(II) reduction rates.

CONCLUSIONS

This study reported for the first time the reduction of Pt(II) using anaerobic granular sludge and provided insights that could help develop biorecovery techniques to alleviate future problems in the supply of PGMs.

Overview of microbes based fabricated biogenic nanoparticles for water and wastewater treatment

Treatment of toxic and emerging pollutants (T&EPs) is increasing the threats to the survival of conventional wastewater treatment (WWTs) technologies. The high installation and operational costs of advanced treatment technologies have shifted the research interest to the development of economical and reliable technology for management of T&EPs. Thus, recently biogenic nanoparticles (BNPs) fabricated using microbes/microorganisms are getting tremendous research interest due to their unique properties (i.e. high specific surface area, desired morphology, catalytic reactivity) for the biodegradation and biosorption of T&EPs. In addition, BNPs can be manufactured using metal contaminated water which indicates a hidden potential for resource recovery and utilization. Therefore, the present study discusses the adsorptive and catalytic performance of BNPs in the removal of T&EPs from water (W) and wastewater (WW). In addition, inspired by the superior performance of BNPs in advance WWT, a model of BNPs based WWT resource recovery and utilization process is also proposed. Finally, main issues i.e. mass production, leaching, poisoning/toxicity, regeneration, reusability and fabrication costs and process optimization are discussed which are main hinders in the transfer of BNPs based WWT technologies from laboratory to commercial scale.

Bioreduction of azo dyes was enhanced by in-situ biogenic palladium nanoparticles

Biogenic nanoparticles are promising materials for their green synthesis method and good performance in stimulation on reduction of environmental contaminants. In this study, Pd(0) nanoparticles (bio-Pd) were generated by Klebsiella oxytoca GS-4-08 in fermentative condition and in-situ improved the azo dye reduction. The bio-Pd was mainly located on cell membrane with a size range of 5-20 nm by TEM and XRD data analyses. Anthraquinone-2-disulfonate (AQS) greatly increased the reduction rate of Pd(II) with a reduction efficiency as high as 96.54 ± 0.23% in 24 h. The quinone respiration theory, glucose metabolism and the biohydrogen pathway were used to explain the enhancement mechanism of the in-situ generated bio-Pd on azo dye reduction. These results indicate that the in-situ generated bio-Pd by K. oxytoca strain is efficient for azo dye reduction without complex preparation processes, which is of great significance for the removal and subsequent safe disposal of hazardous environmental compounds.

Biological synthesis and characterisation of silver nanoparticles using Pseudomonas geniculata H10 for pharmaceutical activity

In the present study, silver nanoparticles (SNPs) were synthesised for the first time using Pseudomonas geniculata H10 as reducing and stabilising agents. The synthesis of SNPs was the maximum when the culture supernatant was treated with 2.5 mM AgNO3 at pH 7 and 40°C for 10 h. The SNPs were characterised by field emission scanning electron microscopy-energy-dispersive spectroscopy, transmission electron microscopy, dynamic light scattering, X-ray diffraction and UV-vis spectroscopy. Fourier transform infrared spectroscopy indicated the presence of proteins, suggesting they may have been responsible for the reduction and acted as capping agents. The SNPs displayed 1,1-diphenyl-2-picrylhydrazyl (IC50 = 28.301 μg/ml) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulphonate (IC50 = 27.076 μg/ml) radical scavenging activities. The SNPs exhibited a broad antimicrobial spectrum against several human pathogenic Gram-positive and Gram-negative bacteria and Candida albicans. The antimicrobial action of SNPs was due to cell deformation resulting in cytoplasmic leakage and subsequent lysis. The authors' results indicate P. geniculata H10 could be used to produce antimicrobial SNPs in a facile, non-toxic, cost-effective manner, and that these SNPs can be used as effective growth inhibitors in various microorganisms, making them applicable to various biomedical and environmental systems. As far as the authors are aware, this study is the first to describe the potential biomedical applications of SNPs synthesised using P. geniculata.

Hydrogen-Cycling during Solventogenesis in Clostridium acetobutylicum American Type Culture Collection (ATCC) 824 Requires the [NiFe]-Hydrogenase for Energy Conservation

Clostridium acetobutylicum has traditionally been used for production of acetone, butanol, and ethanol (ABE). Butanol is a commodity chemical due in part to its suitability as a biofuel; however, the current yield of this product from biological systems is not economically feasible as an alternative fuel source. Understanding solvent phase physiology, solvent tolerance, and their genetic underpinning is key for future strain optimization of the bacterium. This study shows the importance of a [NiFe]-hydrogenase in solvent phase physiology. C. acetobutylicum genes ca_c0810 and ca_c0811, annotated as a HypF and HypD maturation factor, were found to be required for [NiFe]-hydrogenase activity. They were shown to be part of a polycistronic operon with other hyp genes. Hydrogenase activity assays of the ΔhypF/hypD mutant showed an almost complete inactivation of the [NiFe]-hydrogenase. Metabolic studies comparing ΔhypF/hypD and wild type (WT) strains in planktonic and sessile conditions indicated the hydrogenase was important for solvent phase metabolism. For the mutant, reabsorption of acetate and butyrate was inhibited during solventogenesis in planktonic cultures, and less ABE was produced. During sessile growth, the ΔhypF/hypD mutant had higher initial acetone: butanol ratios, which is consistent with the inability to obtain reduced cofactors via H2 uptake. In sessile conditions, the ΔhypF/hypD mutant was inhibited in early solventogenesis, but it appeared to remodel its metabolism and produced mainly butanol in late solventogenesis without the uptake of acids. Energy filtered transmission electron microscopy (EFTEM) mapped Pd(II) reduction via [NiFe]-hydrogenase induced H2 oxidation at the extracelluar side of the membrane on WT cells. A decrease of Pd(0) deposits on ΔhypF/hypD comparatively to WT indicates that the [NiFe]-hydrogenase contributed to the Pd(II) reduction. Calculations of reaction potentials during acidogenesis and solventogenesis predict the [NiFe]-hydrogenase can couple NAD+ reduction with membrane transport of electrons. Extracellular oxidation of H2 combined with the potential for electron transport across the membrane indicate that the [NiFe}-hydrogenase contributes to proton motive force maintenance via hydrogen cycling.

Reduction of platinum (IV) ions to elemental platinum nanoparticles by anaerobic sludge

BACKGROUND

The future supply of platinum group metals (PGM) is at risk because of their scarcity combined with a high demand. Thus recovery of platinum (Pt) from waste is an option worthy of study to help alleviate future shortages. This research explored the microbial reduction of platinum (Pt). The ability of anaerobic granular sludge to reduce Pt(IV) ions under different physiological conditions was studied.

RESULTS

X-Ray diffraction (XRD) and transmission electron microscope (TEM) analyses demonstrated the capacity of the microbial mixed culture to reduce Pt(IV) to Pt(0) nanoparticles, which were deposited on the cell-surface and in the periplasmic space. Ethanol supported the biologically catalyzed Pt(IV) reduction, meanwhile other electron donors; hydrogen (H2) and formate, promoted the chemical reduction of Pt(IV) with some additional biological stimulation in the case of H2. A hypothesis is proposed in which H2 formed from the acetogenesis of ethanol is implicated in subsequent abiotic reduction of Pt(IV) indicating an integrated bio-chemical process. Endogenous controls also resulted in slow Pt(IV) removal from aqueous solution. Selected redox mediators, exemplified by riboflavin, enhanced the Pt(IV) reduction rate.

CONCLUSION

This study reported for the first time the ability of an anaerobic granular sludge to reduce Pt(IV) to elemental Pt(0) nanoparticles.

Status of electronic waste recycling techniques: a review

The increasing use of electrical and electronic equipment leads to a huge generation of electronic waste (e-waste). It is the fastest growing waste stream in the world. Almost all electrical and electronic equipment contain printed circuit boards as an essential part. Improper handling of these electronic wastes could bring serious risk to human health and the environment. On the other hand, proper handling of this waste requires a sound management strategy for awareness, collection, recycling, and reuse. Nowadays, the effective recycling of this type of waste has been considered as a main challenge for any society. Printed circuit boards (PCBs), which are the base of many electronic industries, are rich in valuable heavy metals and toxic halogenated organic substances. In this review, the composition of different PCBs and their harmful effects are discussed. Various techniques in common use for recycling the most important metals from the metallic fractions of e-waste are illustrated. The recovery of metals from e-waste material after physical separation through pyrometallurgical, hydrometallurgical, or biohydrometallurgical routes is also discussed, along with alternative uses of non-metallic fraction. The data are explained and compared with the current e-waste management efforts done in Egypt. Future perspectives and challenges facing Egypt for proper e-waste recycling are also discussed.

Bio-recycling of metals: Recycling of technical products using biological applications

The increasing demand of different essential metals as a consequence of the development of new technologies, especially in the so called "low carbon technologies" require the development of innovative technologies that enable an economic and environmentally friendly metal recovery from primary and secondary resources. There is serious concern that the demand of some critical elements might exceed the present supply within a few years, thus necessitating the development of novel strategies and technologies to meet the requirements of industry and society. Besides an improvement of exploitation and processing of ores, the more urgent issue of recycling of strategic metals has to be enforced. However, current recycling rates are very low due to the increasing complexity of products and the low content of certain critical elements, thus hindering an economic metal recovery. On the other hand, increasing environmental consciousness as well as limitations of classical methods require innovative recycling methodologies in order to enable a circular economy. Modern biotechnologies can contribute to solve some of the problems related to metal recycling. These approaches use natural properties of organisms, bio-compounds, and biomolecules to interact with minerals, materials, metals, or metal ions such as surface attachment, mineral dissolution, transformation, and metal complexation. Further, modern genetic approaches, e.g. realized by synthetic biology, enable the smart design of new chemicals. The article presents some recent developments in the fields of bioleaching, biosorption, bioreduction, and bioflotation, and their use for metal recovery from different waste materials. Currently only few of these developments are commercialized. Major limitations are high costs in comparison to conventional methods and low element selectivity. The article discusses future trends to overcome these barriers. Especially interdisciplinary approaches, the combination of different technologies, the inclusion of modern genetic methods, as well as the consideration of existing, yet unexplored natural resources will push innovations in these fields.

Activating electrochemical catalytic activity of bio-palladium by hybridizing with carbon nanotube as "e- Bridge"

Nano metal catalysts produced by bacteria has received increasing attention owing to its environmental friendly synthesis route. However, the formed metal nanoparticles are associated with poorly conductive cells and challenged to be electrochemically applied. In this study, Palladium (Pd) nanoparticles were synthesized by Shewanella oneidensis MR-1. We demonstrated the limitation of palladized cells (Pd-cells) serving as electro-catalysts can be relieved by hybridizing with the conductive carbon nanotubes (Pd-cells-CNTs hybrid). Compared to the Pd-cells, the electrochemical active surface area of Pd in Pd-cells-CNTs10 (the ratio of Pd/CNTs is 1/10 w/w) were dramatically increased by 68 times to 20.44 m²·g^-1. A considerable enhancement of electrocatalytic activity was further confirmed for Pd-cells-CNTs10 as indicated by a 5-fold increase of steady state current density for nitrobenzene reduction at -0.55 V vs Ag/AgCl. These results indicate that the biogenetic palladium could has been an efficient electro-catalyst but just limited due to lacking an electron transport path (e ^- Bridge). This finding may also be helpful to guide the way to electrochemically use other biogenetic metal nano-materials.

Palladized cells as suspension catalyst and electrochemical catalyst for reductively degrading aromatics contaminants: Roles of Pd size and distribution

The palladized cell (Pd-cell) could be used as an efficient catalyst in catalyzing the degradations of a wide variety of environmental contaminants. Nevertheless, when the Pd NPs associate with the bacteria, the catalytic activity likely significantly affected by the biomass. Quantitative indicators that characterize of Pd-cell are necessary and little attention has been paid to investigate how the catalytic efficiency of Pd-cell is affected by the size and distribution of Pd NPs. To fill this gap, we explored the roles of the above-mentioned key factors on the performance of Pd-cell in catalyzing the degradations of two aromatic contaminants (nitrobenzene and p-chlorophenol) in two commonly used scenarios: (1) using Pd-cell as suspended catalyst in solution and (2) using Pd-cell as electrocatalyst directly coated on electrode. In scenario (1), the relationship of exposing area to Pd particle size and distribution factors was established. Based on theoretical estimation and catalytic performance analysis, the results indicated that adjusting the exposing area to a large value (9.3 ± 0.1 × 10⁵ nm² mg^-1 Pd) was extremely effective for improving the catalytic activity of Pd-cell used as a suspension catalyst. In scenario (2), our results showed that the best electrocatalytic performances were achieved on the electrode decorated with Pd-cells with the largest NP size (54.3 ± 16.4 nm), which exerted maximum electrochemical active surface area (10.6 m² g^-1) as well as favorable conductivity. The coverage of deposited Pd NPs (>95%) on the cell surface played a crucial role in boosting the conductivity of biocatalyst, thus determining the possibility of Pd-cell as an efficient electrocatalyst. The findings of this study provide a guidance for the synthesis and application of Pd-cell, which enables the design of Pd-cell to be suitable for different catalysis systems with high catalytic performance.

Nanosuspensions in Nanobiomedicine

The tremendous success in developing new nanomaterials and fostering technological innovation arises from the focus on interdisciplinary research and collaboration between physical and medical scientists. The concept of nano-medicine is one of the most important and exciting ideas ever generated by the applications of nanoscience. One of the most challenging tasks in the pharmaceutical industry is the formulation of poorly soluble drugs. The implication of conventional techniques for improving the solubility has gained limited success. Nanoparticles facilitate formulation with improved solubility and efficacy mainly through nanosuspension approach. Techniques such as media milling, high-pressure homogenization, and use of microemulsion have been used for production of nanosuspensions for a novel delivery system. Moreover, they are manoeuvred to patient-acceptable dosage forms like tablets, capsules, and lyophilized powder products. Nanosuspension technology has also been studied for active and passive targeted drug delivery systems, which the chapter highlights on various formulational perspectives and applications as a biomedicine delivery system.

Rapid production of Pd nanoparticle by a marine electrochemically active bacterium Shewanella sp. CNZ-1 and its catalytic performance on 4-nitrophenol reduction

Microbial recovery of Pd through Pd(ii) reduction is emerging as a clean alternative to traditional physical and chemical reclaiming treatments.