Differentiation of mesenchymal stem cells into osteoblasts on honeycomb collagen scaffolds

Advances in natural and synthetic macromolecules with stem cells and extracellular vesicles for orthopedic disease treatment

Serious orthopedic disorders resulting from myriad diseases and impairments continue to pose a considerable challenge to contemporary clinical care. Owing to its limited regenerative capacity, achieving complete bone tissue regeneration and complete functional restoration has proven challenging with existing treatments. By virtue of cellular regenerative and paracrine pathways, stem cells are extensively utilized in the restoration and regeneration of bone tissue; however, low survival and retention after transplantation severely limit their therapeutic effect. Meanwhile, biomolecule materials provide a delivery platform that improves stem cell survival, increases retention, and enhances therapeutic efficacy. In this review, we present the basic concepts of stem cells and extracellular vesicles from different sources, emphasizing the importance of using appropriate expansion methods and modification strategies. We then review different types of biomolecule materials, focusing on their design strategies. Moreover, we summarize several forms of biomaterial preparation and application strategies as well as current research on biomacromolecule materials loaded with stem cells and extracellular vesicles. Finally, we present the challenges currently impeding their clinical application for the treatment of orthopedic diseases. The article aims to provide researchers with new insights for subsequent investigations.

Anti-Adhesive Resorbable Indomethacin/Bupivacaine-Eluting Nanofibers for Tendon Rupture Repair: In Vitro and In Vivo Studies

The treatment and surgical repair of torn Achilles tendons seldom return the wounded tendon to its original elasticity and stiffness. This study explored the in vitro and in vivo simultaneous release of indomethacin and bupivacaine from electrospun polylactide-polyglycolide composite membranes for their capacity to repair torn Achilles tendons. These membranes were fabricated by mixing polylactide-polyglycolide/indomethacin, polylactide-polyglycolide/collagen, and polylactide-polyglycolide/bupivacaine with 1,1,1,3,3,3-hexafluoro-2-propanol into sandwich-structured composites. Subsequently, the in vitro pharmaceutic release rates over 30 days were determined, and the in vivo release behavior and effectiveness of the loaded drugs were assessed using an animal surgical model. High concentrations of indomethacin and bupivacaine were released for over four weeks. The released pharmaceutics resulted in complete recovery of rat tendons, and the nanofibrous composite membranes exhibited exceptional mechanical strength. Additionally, the anti-adhesion capacity of the developed membrane was confirmed. Using the electrospinning technique developed in this study, we plan on manufacturing degradable composite membranes for tendon healing, which can deliver sustained pharmaceutical release and provide a collagenous habitat.

Hydrogels with Reversible Crosslinks for Improved Localised Stem Cell Retention: A Review

Successful stem cell applications could have a significant impact on the medical field, where many lives are at stake. However, the translation of stem cells to the clinic could be improved by overcoming challenges in stem cell transplantation and in vivo retention at the site of tissue damage. This review aims to showcase the most recent insights into developing hydrogels that can deliver, retain, and accommodate stem cells for tissue repair. Hydrogels can be used for tissue engineering, as their flexibility and water content makes them excellent substitutes for the native extracellular matrix. Moreover, the mechanical properties of hydrogels are highly tuneable, and recognition moieties to control cell behaviour and fate can quickly be introduced. This review covers the parameters necessary for the physicochemical design of adaptable hydrogels, the variety of (bio)materials that can be used in such hydrogels, their application in stem cell delivery and some recently developed chemistries for reversible crosslinking. Implementing physical and dynamic covalent chemistry has resulted in adaptable hydrogels that can mimic the dynamic nature of the extracellular matrix.

Fibrin glue does not promote migration and proliferation of bone marrow derived mesenchymal stem cells in collagenic membranes: an in vitro study

During Autologous Matrix-Induced Chondrogenesis (AMIC), the membrane is often glued into the chondral defect. However, whether fibrin glue influences cells proliferation and migration remain unclear. This study evaluated the impact of fibrin glue addition to biologic membranes loaded with bone marrow-derived mesenchymal stem cells (B-MSCs). A porcine derived collagen membrane (Cartimaix, Matricel GmbH, Germany) was used. B-MSCs were harvested from three different unrelated donors. The membranes were embedded in mounting medium with DAPI (ABCAM, Cambridge, UK) and analysed at 1-, 2-, 3-, 4-, 6-, and at 8-week follow-up. The DAPI ties the DNA of the cell nucleus, emitting blue fluorescence. DAPI/nuclei signals were analysed with fluorescence microscopy at 100-fold magnification. The group without fibrin glue demonstrated greater migration of the B-MSCs within the membrane at week 4 (P < 0.001), 6 (P < 0.001), and 8 (P < 0.001). No difference was found at week 1, 2, and 3. The group without fibrin glue demonstrated greater proliferation of B-MSCs within the membrane. These differences were significant at week 1 (P = 0.02), 2 (P = 0.008), 3 (P = 0.0009), 4 (P < 0.0001), 6 (P < 0.0001), 8 (P < 0.0001). Concluding, in the present setting, the use of fibrin in a collagenic biomembrane impairs B-MSCs proliferation and migration in vitro.

Surgical implantation of human adipose derived stem cells attenuates experimentally induced hepatic fibrosis in rats

BACKGROUND

Mesenchymal stem cells (MSCs) are multipotent stromal cells and could exert hepatoprotective effects against acute liver injury, steatohepatitis, and fibrogenesis. Here, we evaluated the effects of human adipose derived stem cells (hADSCs) to attenuate experimentally induced hepatic fibrosis and early cirrhosis in rats.

METHODS

Hepatic fibrosis was induced by intraperitoneal injections of CCl₄ (0.1 ml/100 g body weight) twice a week for 8 weeks. hADSCs were isolated and cultured on polyethylene discs coated with hydroxyapatite and 2 cm diameter disc was surgically implanted on the right lateral lobe of the liver. Discs implanted without hADSCs served as control. The animals were injected again with CCl₄ once a week for another 8 weeks. All the animals were sacrificed at the end of 16th week.

RESULTS

Serial administrations of CCl₄ resulted in well developed fibrosis and early cirrhosis at 8th week which maintained until the 16th week. Animals treated with hADSC discs depicted over 50% decrease of collagen with significant increase in serum albumin and total protein levels. Immunohistochemical staining for TGF-β1, α-smooth muscle actin, and collagen type I and type III demonstrated marked decrease compared to the animals without hADSC treatment.

CONCLUSIONS

Treatment with hADSCs improved liver functions, markedly reduced hepatic fibrosis and early cirrhosis. Various pleiotropic and paracrine factors secreted from the hADSCs seem to serve as reparative functions in the attenuation of liver cirrhosis. The data demonstrated that treatment with hADSCs can be successfully used as a potent therapeutic method to prevent progression of hepatic fibrosis and related adverse events.

Crossing Phylums: Butterfly Wing as a Natural Perfusable Three-Dimensional (3D) Bioconstruct for Bone Tissue Engineering

Despite the advent of promising technologies in tissue engineering, finding a biomimetic 3D bio-construct capable of enhancing cell attachment, maintenance, and function is still a challenge in producing tailorable scaffolds for bone regeneration. Here, osteostimulatory effects of the butterfly wings as a naturally porous and non-toxic chitinous scaffold on mesenchymal stromal cells are assessed. The topographical characterization of the butterfly wings implied their ability to mimic bone tissue microenvironment, whereas their regenerative potential was validated after a 14-day cell culture. In vivo analysis showed that the scaffold induced no major inflammatory response in Wistar rats. Topographical features of the bioconstruct upregulated the osteogenic genes, including COL1A1, ALP, BGLAP, SPP1, SP7, and AML3 in differentiated cells compared to the cells cultured in the culture plate. However, butterfly wings were shown to provide a biomimetic microstructure and proper bone regenerative capacity through a unique combination of various structural and material properties. Therefore, this novel platform can be confidently recommended for bone tissue engineering applications.

Non-destructive mechanical assessment for optimization of 3D bioprinted soft tissue scaffolds

Characterizing the mechanical properties of engineered tissue constructs provides powerful insight into the function of engineered tissues for their desired application. Current methods of mechanical characterization of soft hydrogels used in tissue engineering are often destructive and ignore the effect of 3D bioprinting on the overall mechanical properties of a whole tissue construct. This work reports on using a non-destructive method of viscoelastic analysis to demonstrate the influence of bioprinting strategy on mechanical properties of hydrogel tissue scaffolds. Structure-function relationships are developed for common 3D bioprinting parameters such as printed fiber size, printed scaffold pattern, and bioink formulation. Further studies include mechanical properties analysis during degradation, real-time monitoring of crosslinking, mechanical characterization of multi-material scaffolds, and monitoring the effect of encapsulated cell growth on the mechanical strength of 3D bioprinted scaffolds. We envision this method of characterization opening a new wave of understanding and strategy in tissue engineering.

Bioprinting of Stem Cells in Multimaterial Scaffolds and Their Applications in Bone Tissue Engineering

Bioprinting stem cells into three-dimensional (3D) scaffolds has emerged as a new avenue for regenerative medicine, bone tissue engineering, and biosensor manufacturing in recent years. Mesenchymal stem cells, such as adipose-derived and bone-marrow-derived stem cells, are capable of multipotent differentiation in a 3D culture. The use of different printing methods results in varying effects on the bioprinted stem cells with the appearance of no general adverse effects. Specifically, extrusion, inkjet, and laser-assisted bioprinting are three methods that impact stem cell viability, proliferation, and differentiation potential. Each printing method confers advantages and disadvantages that directly influence cellular behavior. Additionally, the acquisition of 3D bioprinters has become more prominent with innovative technology and affordability. With accessible technology, custom 3D bioprinters with capabilities to print high-performance bioinks are used for biosensor fabrication. Such 3D printed biosensors are used to control conductivity and electrical transmission in physiological environments. Once printed, the scaffolds containing the aforementioned stem cells have a significant impact on cellular behavior and differentiation. Natural polymer hydrogels and natural composites can impact osteogenic differentiation with some inducing chondrogenesis. Further studies have shown enhanced osteogenesis using cell-laden scaffolds in vivo. Furthermore, selective use of biomaterials can directly influence cell fate and the quantity of osteogenesis. This review evaluates the impact of extrusion, inkjet, and laser-assisted bioprinting on adipose-derived and bone-marrow-derived stem cells along with the effect of incorporating these stem cells into natural and composite biomaterials.

The Effect of the Repair of Induced Articular Cartilage Defects in Pigs Using Calcium Phosphate Cement with Aminoacids on the Concentrations of Selected Inflammatory Markers and Serum Enzyme Activities

The repair of articular cartilage defects is an intensively developing area of research. Severe inflammatory reactions after surgical interventions on bones or their structures may lead to changes of bone or joint asymmetry. In laboratory diagnostics, some inflammatory biomarkers and serum enzymes are available for the evaluation of these inflammatory processes. A general understanding of inflammatory responses following the repair of cartilage defects is still lacking. The aim of this study was to describe the alterations in the values of five inflammatory markers and the activities of several enzymes in seven 5-month-old pigs within the first 30 days following the restoration of induced articular cartilage defects using the tetracalcium phosphate/nanomoneite cement powder enriched with amino acids (CAL). The reconstruction of surgically induced defects was accompanied by a significant increase of serum amyloid A (SAA, p < 0.05), haptoglobin (Hp, p < 0.001), C-reactive protein (CRP, p < 0.01), and pig major acute phase protein (pig-MAP, p < 0.001). Their concentrations decreased gradually within one-month post-surgery, the values recorded at the end of this period were higher than those obtained prior to surgery. The concentrations of α1-acid glycoprotein (AGP) showed no significant changes during the evaluated period. Alterations were also found in the enzyme activities of creatine kinase (p < 0.05), lactate-dehydrogenase and alkaline phosphatase (p < 0.01). These findings suggest that SAA, Hp, CRP and pig-MAP might be applicable biomarkers of acute phase response for the monitoring of postoperative period.

The effects of despeckling filters on pore size measurements in collagen scaffold micro-CT data

Micro-CT is often used to assess the characteristics of porous structures such as tissue engineering scaffolds and trabecular bone. Prior to analysis, micro-CT images can be thresholded and filtered to remove noise. Scaffold pore size affects mechanical properties and biological cell behaviour and is a frequently assessed parameter. This paper identifies and characterizes an artefact affecting a commonly used filter which erroneously increases mean pore size. The 3D sweep despeckling filter removes all but the largest object within a volume of interest, and therefore deletes any disconnected objects located at the periphery, increasing measured mean pore size. This artefact is characterized, and effective methods to mitigate its effects are devised, involving despeckling a sufficiently large volume of interest, then reducing the volume of interest in size to remove the error prior to analysis. Techniques to effectively apply this method to other data sets are described. This method eliminates the artefact but is time-consuming and computationally expensive. Alternative, more economical filters which remove objects below a specified size are also assessed but are shown to be affected by the same artefact. These results will help to guide the implementation of future studies investigating the effects of pore size.

Application of a collagen scaffold saturated with platelet-rich plasma in prevention of bisphosphonate-related osteonecrosis of the jaw in the rat animal model

BACKGROUND

Among the myriad adverse events of drugs in the oral cavity, Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is one of the most detrimental drug reactions that have ever been known.

OBJECTIVE

This study was aimed to investigate the success of applying collagen scaffold alone and platelet-rich plasma (PRP)+collagen scaffold in prevention of zoledronic acid-induced BRONJ in the rat.

METHODS

A total of 17 male Wistar-rats were treated with 4 weekly doses of zoledronic acid. All rats were undergone bilateral tooth extraction of mandibular first molars and divided into three groups of scaffold + PRP + suture, scaffold + suture, and suture only. All rats were scarified and clinical, radiological, histological and histomorphomerical evaluations were made on week 8 post-treatment. The soft tissue healing, bone mineralized density (BMD), number of osteoclasts and osteoblasts, necrotic bone (NB), intensity of inflammation and new bone formation (NBF) were analyzed.

RESULTS

BMD, number of osteoblasts and NBF variables proved to be statistically were higher in the treatment groups than the control group. In addition, the PRP + scaffold group showed the better results in terms of BMD, number of osteoblasts and NBF than that of the scaffold alone group. Number of osteoclasts, inflammation intensity and osteonecrosis were also significantly different in the PRP + scaffold group compared to the scaffold alone and the control groups.

CONCLUSION

Application of a PRP-enriched collagen scaffold appeared to be a successful preventive treatment for BRONJ by effecting of the number of osteoblasts and osteoclasts, BMD, NBF, inflammation, and osteonecrosis.

3D-printed gelatin methacrylate (GelMA)/silanated silica scaffold assisted by two-stage cooling system for hard tissue regeneration

Among many biomaterials, gelatin methacrylate (GelMA), a photocurable protein, has been widely used in 3D bioprinting process owing to its excellent cellular responses, biocompatibility and biodegradability. However, GelMA still shows a low processability due to the severe temperature dependence of viscosity. To overcome this obstacle, we propose a two-stage temperature control system to effectively control the viscosity of GelMA. To optimize the process conditions, we evaluated the temperature of the cooling system (jacket and stage). Using the established system, three GelMA scaffolds were fabricated in which different concentrations (0, 3 and 10 wt%) of silanated silica particles were embedded. To evaluate the performances of the prepared scaffolds suitable for hard tissue regeneration, we analyzed the physical (viscoelasticity, surface roughness, compressive modulus and wettability) and biological (human mesenchymal stem cells growth, western blotting and osteogenic differentiation) properties. Consequently, the composite scaffold with greater silica contents (10 wt%) showed enhanced physical and biological performances including mechanical strength, cell initial attachment, cell proliferation and osteogenic differentiation compared with those of the controls. Our results indicate that the GelMA/silanated silica composite scaffold can be potentially used for hard tissue regeneration.

Cell therapy: A potential solution for the healing of bone cavities

Aim

To Explore whether the use of autologous BMMNCs as a cell therapy technique will improve the healing of bone cavities in vivo.

Methodology

After achieving proper anesthesia, mononuclear cells were isolated from iliac crest's bone marrow aspirates (BMMNCs). Then access cavity, root canal preparation, and filling were done in third and fourth premolars, followed by amalgam coronal restoration. After that, a flap was reflected and a standardized bone cavity was drilled, the related root-ends were resected and retrocavity was drilled and filled with MTA. Before repositioning the flap, the bone cavity was filled with the desired filling material according to its corresponding group (n = 8): CollaCote group; where collagen scaffold was used, MNC group; in which CollaCote® loaded with isolated BMMNCs were applied, Biogen group; in which BIO-GEN® graft material was applied and finally Control group; where the bone cavities were left empty to heal spontaneously. Evaluations of healing of the bone cavities were done radiographically and histologically.

Results

The MNC group induced the best healing potential with statistical significant difference from other groups.

Conclusion

cell therapy utilizing autologous BMMNCs looks to beat the conventional therapies and convey a significant improvement in the healing of the bone cavity in vivo.

Mesenchymal stem cells protect against malaria pathogenesis by reprogramming erythropoiesis in the bone marrow

Malaria remains a major public health problem worldwide. The immune mechanisms that mediate protection against malaria are still unclear. Previously, we reported that mesenchymal stem cells (MSCs) play a critical role in host protection against malaria by altering the dynamic balance of T regulatory cells and effector T cells producing inflammatory cytokines. Here, we report that MSCs reprogram haematopoiesis in primary (bone marrow) and secondary (spleen) lymphoid organs to provide host protection against malaria. Adoptive transfer of MSCs from malaria-infected mice to naïve recipient mice that were subsequently infected with malaria parasites dramatically accelerated the formation of colony-forming units-erythroid cells in the bone marrow. Adoptively transferred MSCs also induced expression of the key erythroid cell differentiation factor GATA-1 in the spleen of recipient animals. Interestingly, we further observed a subtle increase in the CD34⁺ hematopoietic stem and progenitor cells in lymphoid organs, including spleen and lymph nodes. Infusion of MSCs also enhanced T cell proliferation, resulting in increased numbers of both CD4⁺ and CD8⁺ T cells in the spleen. MSCs also inhibited the induction of the negative co-stimulatory receptor programmed death-1 by T cells in recipient animals upon infection with malaria parasites. Taken together, our findings suggest that MSCs play a critical role in host protection against malaria infection by modulating erythropoiesis and lymphopoiesis.

Anisotropic electrospun honeycomb polycaprolactone scaffolds: Elaboration, morphological and mechanical properties

Tissue engineering technology requires porous scaffolds, based on biomaterials, which have to mimic as closely as possible the morphological and anisotropic mechanical properties of the native tissue to substitute. Anisotropic fibrous scaffolds fabricated by template-assisted electrospinning are investigated in this study. Fibers of electrospun Polycaprolactone (PCL) were successfully arranged spatially into honeycomb structures by using well-shaped 3D micro-architected metal collectors. Fibrous scaffolds present 2 × 4 mm² wide elementary patterns with low and high fiber density areas. Distinct regions of the honeycomb patterns were analyzed through SEM images revealing different fiber diameters with specific fiber orientation depending on the regions of interest. Tensile test experiments were carried out with an optical observation of the local deformation at the pattern scale, allowing the determination and analysis, at small and large deformation, of the axial and transverse local strains. The honeycomb patterned mats showed significantly different mechanical properties along the two orthogonal directions probing an anisotropic ratio of 4.2. Stress relaxation test was performed on scaffolds at 15% of strain. This measurement pointed out the low contribution of the viscosity of about 20% in the mechanical response of the scaffold. An orthotropic linear elastic model was consequently proposed to characterize the anisotropic behavior of the produced patterned membranes. This new versatile method to produce architected porous materials, adjustable to several polymers and structures, will provide appealing benefits for soft regenerative medicine application and the development of custom-made scaffolds.

Wound Healing and Cell Dynamics Including Mesenchymal and Dental Pulp Stem Cells Induced by Photobiomodulation Therapy: An Example of Socket-Preserving Effects after Tooth Extraction in Rats and a Literature Review

High-intensity laser therapy (HILT) and photobiomodulation therapy (PBMT) are two types of laser treatment. According to recent clinical reports, PBMT promotes wound healing after trauma or surgery. In addition, basic research has revealed that cell differentiation, proliferation, and activity and subsequent tissue activation and wound healing can be promoted. However, many points remain unclear regarding the mechanisms for wound healing induced by PBMT. Therefore, in this review, we present an example from our study of HILT and PBMT irradiation of tooth extraction wounds using two types of lasers with different characteristics (diode laser and carbon dioxide laser). Then, the effects of PBMT on the wound healing of bone tissues are reviewed from histological, biochemical, and cytological perspectives on the basis of our own study of the extraction socket as well as studies by other researchers. Furthermore, we consider the feasibility of treatment in which PBMT irradiation is applied to stem cells including dental pulp stem cells, the theme of this Special Issue, and we discuss research that has been reported on its effect.

Pathogenic Mechanisms of Myeloma Bone Disease and Possible Roles for NRF2

Osteolytic bone lesions are one of the central features of multiple myeloma (MM) and lead to bone pain, fractures, decreased quality of life, and decreased survival. Dysfunction of the osteoclast (OC)/osteoblast (OB) axis plays a key role in the development of myeloma-associated osteolytic lesions. Many signaling pathways and factors are associated with myeloma bone diseases (MBDs), including the RANKL/OPG and NF-κB pathways. NRF2, a master regulator of inflammatory signaling, might play a role in the regulation of bone metabolism via anti-inflammatory signaling and decreased reactive oxygen species (ROS) levels. The loss of NRF2 expression in OCs reduced bone mass via the RANK/RANKL pathway and other downstream signaling pathways that affect osteoclastogenesis. The NRF2 level in OBs could interfere with interleukin (IL)-6 expression, which is associated with bone metabolism and myeloma cells. In addition to direct impact on OCs and OBs, the activity of NRF2 on myeloma cells and mesenchymal stromal cells influences the inflammatory stress/ROS level in these cells, which has an impact on OCs, OBs, and osteocytes. The interaction between these cells and OCs affects the osteoclastogenesis of myeloma bone lesions associated with NRF2. Therefore, we have reviewed the effects of NRF2 on OCs and OBs in MBDs.

Use of in vitro bone models to screen for altered bone metabolism, osteopathies, and fracture healing: challenges of complex models

Approx. every third hospitalized patient in Europe suffers from musculoskeletal injuries or diseases. Up to 20% of these patients need costly surgical revisions after delayed or impaired fracture healing. Reasons for this are the severity of the trauma, individual factors, e.g, the patients’ age, individual lifestyle, chronic diseases, medication, and, over 70 diseases that negatively affect the bone quality. To investigate the various disease constellations and/or develop new treatment strategies, many in vivo, ex vivo, and in vitro models can be applied. Analyzing these various models more closely, it is obvious that many of them have limits and/or restrictions. Undoubtedly, in vivo models most completely represent the biological situation. Besides possible species-specific differences, ethical concerns may question the use of in vivo models especially for large screening approaches. Challenging whether ex vivo or in vitro bone models can be used as an adequate replacement for such screenings, we here summarize the advantages and challenges of frequently used ex vivo and in vitro bone models to study disturbed bone metabolism and fracture healing. Using own examples, we discuss the common challenge of cell-specific normalization of data obtained from more complex in vitro models as one example of the analytical limits which lower the full potential of these complex model systems.

The osteogenesis performance of titanium modified via plasma-enhanced chemical vapor deposition: in vitro and in vivo studies

Titanium (Ti) and its alloys are widely used in dental implants due to their favorable mechanical properties and biocompatibility. Surface characteristics, including physical and chemical properties, are crucial factors to enhance the osteogenesis performance of Ti. The aim of this study is to evaluate amino group surface modification to facilitate the osteogenic potential and bone repair of dental implants both in vitro and in vivo. Herein, amino group-modified Ti surfaces were constructed via the plasma-enhanced chemical vapor deposition (PECVD) technique with an allylamine monomer. The adhesion, proliferation, alkaline phosphate activity and osteogenesis-related genetic expression of MG-63 cells on the surfaces were performed in vitro and presented a significant increase in amino group-modified Ti compared with that in Ti. The in vivo study in miniature pigs was evaluated through micro-computed tomography analysis and histological evaluation, which exhibited enhanced new bone formation in amino group-modified Ti compared with that in Ti after implantation for 4, 8 and 12 weeks. Consequently, amino group surface modification with the PECVD technique may provide a promising modification method to enhance the osteogenesis performance of Ti implants.

CXCL12-CXCR4 Interplay Facilitates Palatal Osteogenesis in Mice

Cranial neural crest cells (CNCCs), identified by expression of transcription factor Sox9, migrate to the first branchial arch and undergo proliferation and differentiation to form the cartilage and bone structures of the orofacial region, including the palatal bone. Sox9 promotes osteogenic differentiation and stimulates CXCL12-CXCR4 chemokine-receptor signaling, which elevates alkaline phosphatase (ALP)-activity in osteoblasts to initiate bone mineralization. Disintegration of the midline epithelial seam (MES) is crucial for palatal fusion. Since we earlier demonstrated chemokine-receptor mediated signaling by the MES, we hypothesized that chemokine CXCL12 is expressed by the disintegrating MES to promote the formation of an osteogenic center by CXCR4-positive osteoblasts. Disturbed migration of CNCCs by excess oxidative and inflammatory stress is associated with increased risk of cleft lip and palate (CLP). The cytoprotective heme oxygenase (HO) enzymes are powerful guardians harnessing injurious oxidative and inflammatory stressors and enhances osteogenic ALP-activity. By contrast, abrogation of HO-1 or HO-2 expression promotes pregnancy pathologies. We postulate that Sox9, CXCR4, and HO-1 are expressed in the ALP-activity positive osteogenic regions within the CNCCs-derived palatal mesenchyme. To investigate these hypotheses, we studied expression of Sox9, CXCL12, CXCR4, and HO-1 in relation to palatal osteogenesis between E15 and E16 using (immuno)histochemical staining of coronal palatal sections in wild-type (wt) mice. In addition, the effects of abrogated HO-2 expression in HO-2 KO mice and inhibited HO-1 and HO-2 activity by administrating HO-enzyme activity inhibitor SnMP at E11 in wt mice were investigated at E15 or E16 following palatal fusion. Overexpression of Sox9, CXCL12, CXCR4, and HO-1 was detected in the ALP-activity positive osteogenic regions within the palatal mesenchyme. Overexpression of Sox9 and CXCL12 by the disintegrating MES was detected. Neither palatal fusion nor MES disintegration seemed affected by either HO-2 abrogation or inhibition of HO-activity. Sox9 progenitors seem important to maintain the CXCR4-positive osteoblast pool to drive osteogenesis. Sox9 expression may facilitate MES disintegration and palatal fusion by promoting epithelial-to-mesenchymal transformation (EMT). CXCL12 expression by the MES and the palatal mesenchyme may promote osteogenic differentiation to create osteogenic centers. This study provides novel evidence that CXCL12-CXCR4 interplay facilitates palatal osteogenesis and palatal fusion in mice.

Smart Surface-Enhanced Resonance Raman Scattering Nanoprobe for Monitoring Cellular Alkaline Phosphatase Activity during Osteogenic Differentiation

High-efficiency induction of bone marrow mesenchymal stem cells (BMSCs) to osteogenic differentiation in vitro can help solve a series of bone diseases such as bone injury, fracture repair, and osteoporosis. In order to explore the optimal conditions for different chemical inducers to promote BMSCs differentiation and the possible differentiation mechanisms, we developed a smart nanoprobe that can achieve in situ alkaline phosphatase (ALP) activity detection during osteogenic differentiation in cells. The smart nanoprobe (Au@BCIP) was designed as the surface decoration of gold nanoparticles (AuNPs) with 5-bromo-4-chloro-3-indolyl phosphate (BCIP). The nanoprobe was co-cultured with differentiated BMSCs at different stages to monitor ALP activity based on an ALP-catalyzed hydrolysis reaction with BCIP as a substrate. The product can be quickly oxidized by dissolved oxygen to obtain a Raman-active species (5,5'-dibromo-4,4'-dichloro-1H,1H-[2,2'] biindolylidene-3,3'-dione). The SERS sensitivity was greatly improved by resonating the excitation wavelength of 632.8 nm. It is a new strategy for tracing bone disease-related ALP activity in an in vivo model with high sensitivity and selectivity and non-invasion. By using this nanoprobe, osteogenic differentiation of cells under osteogenic supplements was assessed and the p38 MAPK signaling pathway for osteogenic differentiation was experimentally evidenced, which are of significance for understanding BMSCs and regulating their osteogenic differentiation process.

Material-Dependent Formation and Degradation of Bone Matrix-Comparison of Two Cryogels

Cryogels represent ideal carriers for bone tissue engineering. We recently described the osteogenic potential of cryogels with different protein additives, e.g., platelet-rich plasma (PRP). However, these scaffolds raised concerns as different toxic substances are required for their preparation. Therefore, we developed another gelatin (GEL)-based cryogel. This study aimed to compare the two scaffolds regarding their physical characteristics and their influence on osteogenic and osteoclastic cells. Compared to the PRP scaffolds, GEL scaffolds had both larger pores and thicker walls, resulting in a lower connective density. PRP scaffolds, with crystalized calcium phosphates on the surface, were significantly stiffer but less mineralized than GEL scaffolds with hydroxyapatite incorporated within the matrix. The GEL scaffolds favored adherence and proliferation of the osteogenic SCP-1 and SaOS-2 cells. Macrophage colony-stimulating factor (M-CSF) and osteoprotegerin (OPG) levels seemed to be induced by GEL scaffolds. Levels of other osteoblast and osteoclast markers were comparable between the two scaffolds. After 14 days, mineral content and stiffness of the cryogels were increased by SCP-1 and SaOS-2 cells, especially of PRP scaffolds. THP-1 cell-derived osteoclastic cells only reduced mineral content and stiffness of PRP cryogels. In summary, both scaffolds present powerful advantages; however, the possibility to altered mineral content and stiffness may be decisive when it comes to using PRP or GEL scaffolds for bone tissue engineering.

Two new, near-infrared, fluorescent probes as potential tools for imaging bone repair

A precise imaging technique to evaluate osteogenesis, osteodifferentiation, and osseointegration following peri-implant surgery is in high clinical demand. Herein, we report the generation of two new, near-infrared (NIR) fluorescent probes for use in the molecular imaging of bone repair. The first probe aims to monitor the in vitro differentiation of human mesenchymal stem cells (MSCs) into osteoblasts. A NIR fluorochrome was conjugated to a cyclic peptide that binds to integrin α5β1, a factor that promotes osteogenesis in MSCs and therefore functioned as an osteoblast-specific marker. The second probe aims to monitor osteogenesis, and was generated by conjugating the drug pamidronate to a NIR fluorescent gold nanocluster. Pamidronate specifically binds to hydroxyapatite (HA), a mineral present in bone that is produced by osteoblasts, and therefore provides a functional marker for new bone formation. Our results show that both probes bind to their specific targets in vitro-differentiated osteoblasts, and not to undifferentiated MSCs, and emit NIR fluorescence for functional detection. This in vitro work demonstrates the ability of these probes to bind to active osteoblasts and their mineral deposits and highlight their potential utility as clinical tools for the imaging of the osseointegration process at the molecular level.

Utility of High-Intensity Laser Therapy Combined with Photobiomodulation Therapy for Socket Preservation After Tooth Extraction

Objective: High-intensity laser therapy (HILT) combined with photobiomodulation therapy (PBMT) using a diode or CO₂ laser was administered after extraction of the left first molar in rats. Effects on socket preservation (preservation of the alveolar bone and healing time after extraction) were evaluated histopathologically.

Background: Irradiation using a diode or CO₂ laser has been shown to hasten wound healing, but the effects remain controversial.

Methods: Five-week-old male Wistar rats that underwent extraction of the left maxillary first molar were divided into three groups: diode laser irradiation (diode group), CO₂ laser irradiation (CO₂ group), and no laser irradiation (control group). HILT (27 J) was performed immediately after tooth extraction to enhance blood coagulation, followed by PBMT (0.7 J) 1 day later to enhance healing. Tissues, including the extraction socket, were removed en bloc 3, 5, 7, 10, and 21 days postextraction to determine the morphological characteristics of wound healing and the distribution of myofibroblasts involved in scar formation.

Results: In the diode and CO₂ groups, new bone formation and cancellous bone maturation were observed at an early stage of wound healing. The number of myofibroblasts was significantly lower in the laser treatment groups than the control (p < 0.001), and both treatment groups had a significantly higher alveolar crest height (p < 0.01), with almost no concavity in the mucosa of the extraction wound.

Conclusions: Combined HILT and PBMT following tooth extraction hastened wound healing and preserved alveolar crest height, suggesting a role in socket preservation.

Changes in the Acute-Phase Protein Concentrations and Activities of Some Enzymes in Pigs Following the Repair of Experimentally Induced Articular Cartilage Defects Using Two Types of Biocement Powder

Simple Summary

Articular cartilage reconstruction is aimed at the restoration of damaged joint cartilage. The use of bone cement is one type of method applicable for this reconstruction. The potential use of repair techniques must be evaluated by pre-clinical and clinical studies in animal models, including the assessment of some biochemical parameters. Acute-phase proteins are a class of proteins whose concentrations increase in response to injury or inflammation. They may serve as useful biomarkers for the evaluation of post-operative complications, as well as to reflect the extent of surgical trauma. Information regarding their usefulness after cartilage reconstruction are still limited. Similarly, little is known about the response of the organism to various reconstruction techniques and various biomaterials used for the repair of defects. This paper provides important information about the changes in the concentrations of acute-phase proteins and the activity of serum enzymes in pigs within the first 30 days following the repair of experimentally induced articular cartilage defects using tetracalcium phosphate/nanomonetite cement powder (C cement) and cement powder containing aminoacids (CAK cement). Marked inflammatory responses with increased acute-phase proteins concentrations were observed following the reconstruction of articular cartilage defects using both types of biocement powder. The results suggest, that the tetracalcium phosphate/nanomonetite cement powder without amino acids would be more suitable for possible cartilage repair in the human population.

Abstract

The objective of the study was to assess the usefulness of acute-phase proteins (APPs) and serum enzymes in the evaluation of post-operative state after cartilage reconstruction in an animal model (Sus scrofa domesticus). Fifteen clinically healthy female pigs were evaluated during the first 30 days after the repair of experimentally induced articular cartilage defects using two types of biocement powders. Animals were divided into groups according to the type of biocement powder used: CAK—with amino acids (n = 6), C—without amino acids (n = 6) and the control group (Ctr) was without biocement (n = 3). The concentrations of selected APPs—serum amyloid A (SAA), haptoglobin (Hp) and C-reactive protein (CRP), and the activities of some serum enzymes—creatine kinase (CK), alkaline phosphatase (AP), and lactate dehydrogenase (LD) were measured one day before the surgery and on days 7, 14, and 30 after the surgical intervention. The most significant changes during the evaluated period were observed in the concentrations of SAA (p < 0.001) and Hp (p < 0.001), with marked increase of values 7 days after surgery. There was a numerical, but not statistically significant, difference between CAK, C and Ctr groups (p > 0.05). Marked variations were observed also in the activities of the evaluated enzymes, with the most significant changes in the activity of AP in the CAK group (p < 0.001). Presented results suggest possible usefulness of some APPs and serum enzymes in the evaluation of post-operative inflammatory state after the reconstruction of articular cartilage defects.

Triple PLGA/PCL Scaffold Modification Including Silver Impregnation, Collagen Coating, and Electrospinning Significantly Improve Biocompatibility, Antimicrobial, and Osteogenic Properties for Orofacial Tissue Regeneration

Biodegradable synthetic scaffolds hold great promise for oral and craniofacial guided tissue regeneration and bone regeneration. To overcome the limitations of current scaffold materials in terms of osteogenic and antimicrobial properties, we have developed a novel silver-modified/collagen-coated electrospun poly-lactic-co-glycolic acid/polycaprolactone (PLGA/PCL) scaffold (PP-pDA-Ag-COL) with improved antimicrobial and osteogenic properties. Our novel scaffold was generated by electrospinning a basic PLGA/PCL matrix, followed by silver nanoparticles (AgNPs) impregnation via in situ reduction, polydopamine coating, and then coating by collagen I. The three intermediate materials involved in the fabrication of our scaffolds, namely, PLGA/PCL (PP), PLGA/PCL-polydopamine (PP-pDA), and PLGA/PCL-polydopamine-Ag (PP-pDA-Ag), were used as control scaffolds. Scanning electron micrographs and mechanical testing indicated that the unique three-dimensional structures with randomly oriented nanofibrous electrospun scaffold architectures, the elasticity modulus, and the tensile strength were maintained after modifications. CCK-8 cell proliferation analysis demonstrated that the PP-pDA-Ag-COL scaffold was associated with higher MC3T3 proliferation rates than the three control scaffolds employed. Scanning electron and fluorescence light microscopy illustrated that PP-pDA-Ag-COL scaffolds significantly enhanced MC3T3 cell adhesion compared to the control scaffolds after 12 and 24 h culture, in tandem with the highest β1 integrin expression levels, both at the mRNA level and the protein level. Alkaline phosphatase activity, BMP2, and RUNX2 expression levels of MC3T3 cells cultured on PP-pDA-Ag-COL scaffolds for 7 and 14 days were also significantly higher when compared to controls (P < 0.001). There was a wider antibacterial zone associated in PP-pDA-Ag-COL and PP-pDA-Ag scaffolds versus control scaffolds (P < 0.05), and bacterial fluorescence was reduced on the Ag-modified scaffolds after 24 h inoculation against Staphylococcus aureus and Streptococcus mutans. In a mouse periodontal disease model, the PP-pDA-Ag-COL scaffold enhanced alveolar bone regeneration (31.8%) and was effective for periodontitis treatment. These results demonstrate that our novel PP-pDA-Ag-COL scaffold enhanced biocompatibility and osteogenic and antibacterial properties and has therapeutic potential for alveolar/craniofacial bone regeneration.

Impact of Four Protein Additives in Cryogels on Osteogenic Differentiation of Adipose-Derived Mesenchymal Stem Cells

Human adipose-derived mesenchymal stem/stromal cells (Ad-MSCs) have great potential for bone tissue engineering. Cryogels, mimicking the three-dimensional structure of spongy bone, represent ideal carriers for these cells. We developed poly(2-hydroxyethyl methacrylate) cryogels, containing hydroxyapatite to mimic inorganic bone matrix. Cryogels were additionally supplemented with different types of proteins, namely collagen (Coll), platelet-rich plasma (PRP), immune cells-conditioned medium (CM), and RGD peptides (RGD). The different protein components did not affect scaffolds' porosity or water-uptake capacity, but altered pore size and stiffness. Stiffness was highest in scaffolds with PRP (82.3 kPa), followed by Coll (55.3 kPa), CM (45.6 kPa), and RGD (32.8 kPa). Scaffolds with PRP, CM, and Coll had the largest pore diameters (~60 µm). Ad-MSCs were osteogenically differentiated on these scaffolds for 14 days. Cell attachment and survival rates were comparable for all four scaffolds. Runx2 and osteocalcin levels only increased in Ad-MSCs on Coll, PRP and CM cryogels. Osterix levels increased slightly in Ad-MSCs differentiated on Coll and PRP cryogels. With differentiation alkaline phosphatase activity decreased under all four conditions. In summary, besides Coll cryogel our PRP cryogel constitutes as an especially suitable carrier for bone tissue engineering. This is of special interest, as this scaffold can be generated with patients' PRP.

Positive modulation of osteogenesis on a titanium oxide surface incorporating strontium oxide: An in vitro and in vivo study

Surface chemistry and topography can determinatively affect the osseointegration of dental implants. Strontium (Sr) has a significant effect on the promotion of bone formation and inhibitation of bone resorption. The emphasis of this study lies on the evaluation of a new surface treatment that aims to improve the early osseointegration of dental implantation both in vitro and in vivo. A hydrothermal method was used to prepare an SrTiO₃ incorporation on sandblasted large-grit double acid-etched (SLA) titanium surfaces in SrCl₂ solution. The composition and morphology of the SrTiO₃ doped surface were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy，and scanning electron microscopy. In addition, the external release figure of Sr was examined by inductively coupled plasma mass spectrometry. The proliferation, adhesion and differentiation of MC3T3-E1 cells on this surface were evaluated in vitro and presented a significant increase in SLA-Sr group compared with that in SLA group. An in vivo study in 24 New Zealand rabbits indicated a remarkable growth in the volume of direct bone-to-implant contact and peri-implant bone in SLA-Sr group, which were compared with SLA group after 3 and 6 weeks, and removal torque tests exhibited a higher torque removal value of SLA-Sr implants. The study gave the result that the biological effect of SLA-Sr implants was significantly superior to that of the SLA implants at the early stage of osseointegration.

Importance of crosslinking strategies in designing smart biomaterials for bone tissue engineering: A systematic review

Biomaterials are of significant importance in biomedical applications as these biological macromolecules have moderately replaced classical tissue grafting techniques owing to its beneficial properties. Despite of its favourable advantages, poor mechanical and degradative properties of biomaterials are of great concern. To this regard, crosslinkers have emerged as a smart and promising tool to augment the biological functionality of biopolymers. Different crosslinkers have been extensively used in past decades to develop bone substitutes, but the implications of toxic response and adverse reactions are truly precarious after implantation. Traditional crosslinker like glutaraldehyde has been widely used in numerous bio-implants but the potential toxicity is largely being debated with many disproving views. As alternative, green chemicals, enzymatic and non-enzymatic chemicals, bi-functional epoxies, zero-length crosslinkers and physical crosslinkers have been introduced to achieve the desired properties of a bone substitute. In this review, systematic literature search was performed on PubMed database to identify the most commonly used crosslinkers for developing promising bone like materials. The relevant articles were identified, analysed and reviewed in this paper giving due importance to different crosslinking methodologies and comparing their effectiveness and efficacy in regard to material composition, scaffold production, crosslinker dosage, toxicity and immunogenicity. This review summarizes the recent developments in crosslinking mechanism with an emphasis placed on their ability to link proteins through bonding reactions. Finally, this study also covers the convergent and divergent methodologies of crosslinking strategies also giving special importance in retrieving the current limitations and future opportunities of crosslinking modalities in bone tissue engineering.

Osteoblastic differentiation potential of human amniotic fluid-derived mesenchymal stem cells in different culture conditions

Osteoporosis is a bone degenerative disease characterized by a decrease in bone strength and an alteration in the osseous micro-architecture causing an increase in the risk of fractures. These diseases usually happen in post-menopausal women and elderly men. The most common treatment involves anti-resorptive agent drugs. However, the inhibition of bone resorption alone is not adequate for recovery in patients at the severe stage of osteoporosis who already have a fracture. Therefore, the combination of utilizing osteoblast micro mimetic scaffold in cultivation with the stimulation of osteoblastic differentiations to regain bone formation is a treatment strategy of considerable interest. The aims of this current study are to investigate the osteoblastic differentiation potential of mesenchymal stem cells derived from human amniotic fluid and to compare the monolayer culture and scaffold culture conditions. The results showed the morphology of cells in human amniotic fluid as f-type, which is a typical cell shape of mesenchymal stem cells. In addition, the proliferation rate of cells in human amniotic fluid reached the highest peak after 14 days of culturing. After which time, the growth rate slowly decreased. Moreover, the positive expression of specific mesenchymal cell surface markers including CD44, CD73, CD90, and also HLA-ABC (MHC class I) were recorded. On the other hand, the negative expressions of the endothelial stem cells markers (CD31), the hematopoietic stem cells markers (CD34, 45), the amniotic stem cells markers (CD117), and also the HLA-DR (MHC class II) were also recorded. The expressions of osteoblastogenic related genes including OCN, COL1A1, and ALP were higher in the osteogenic-induced group when compared to the control group. Interestingly, the osteoblastogenic related gene expressions that occurred under scaffold culture conditions were superior to the monolayer culture conditions. Additionally, higher ALP activity and greater calcium deposition were recorded in the extracellular matrix in the osteogenic-induced group than in the culture in the scaffold group. In summary, the mesenchymal stem cells derived from human amniotic fluid can be induced to be differentiated into osteoblastic-like cells and can promote osteoblastic differentiation using the applied scaffold.

Polypeptide Thermogels as Three-Dimensional Scaffolds for Cells

BACKGROUND

Thermogel is an aqueous solution that exhibits a sol-to-gel transition as the temperature increases. Stem cells, growth factors, and differentiating factors can be incorporated in situ in the matrix during the sol-to-gel transition, leading to the formation of a three-dimensional (3D) cell-culture scaffold.

METHODS

The uses of thermogelling polypeptides, such as collagen, Matrigel™, elastin-like polypeptides, and synthetic polypeptides, as 3D scaffolds of cells, are summarized in this paper.

RESULTS

The timely supply of growth factors to the cells, cell survival, and metabolite removal is to be insured in the cell culture matrix. Various growth factors were incorporated in the matrix during the sol-to-gel transition of the thermogelling polypeptide aqueous solutions, and preferential differentiation of the incorporated stem cells into specific target cells were investigated. In addition, modulus of the matrix was controlled by post-crosslinking reactions of thermogels or employing composite systems. Chemical functional groups as well as biological factors were selected appropriately for targeted differentiation of the incorporated stem cells.

CONCLUSION

In addition to all the advantages of thermogels including mild conditions for cell-incorporation and controlled supplies of the growth factors, polypeptide thermogels provide neutral pH environments to the cells during the degradation of the gel. Polypeptide thermogels as an injectable scaffold can be a promising system for their eventual in vivo applications in stem cell therapy.

In vitro osteoblastic differentiation of mesenchymal stem cells generates cell layers with distinct properties

Background

Differentiation of mesenchymal stem cells to osteoblasts is widely performed in research laboratories. Classical tests to prove this differentiation employ procedures such as cell fixation, cell lysis or cell scraping. Very few studies report gentle dissociation of mesenchymal stem cells undergoing an osteodifferentiation process. Here we used this technique to reveal the presence of several cell layers during osteogenesis and to study their different properties.

Methods

Through the sequential enzymatic detachment of the cells, we confirm the presence of several layers of differentiated cells and we compare them in terms of enzymatic sensitivity for dissociation, expression of cluster of differentiation, cytosolic calcium oscillations and osteogenic potential. Adipogenic and neurogenic differentiations were also performed in order to compare the cell layers.

Results

The cells undergoing differentiation formed one layer in the neurogenic differentiation, two layers in the adipogenic differentiation and at least four layers in the osteogenic differentiation. In the latter, the upper layers, maintained by a collagen I extracellular matrix, can be dissociated using collagenase I, while the remaining lowest layer, attached to the bottom of the dish, is sensitive only to trypsin-versene. The action of collagenase I is more efficient before the mineralization of the extracellular matrix. The collagenase-sensitive and trypsin-sensitive layers differ in their cluster of differentiation expression. The dissociation of the cells on day 15 reveals that cells could resume their growth (increase in cell number) and rapidly differentiate again in osteoblasts, in 2 weeks (instead of 4 weeks). Cells from the upper layers displayed a higher mineralization.

Conclusions

MSCs undergoing osteogenic differentiation form several layers with distinct osteogenic properties. This could allow the investigators to use upper layers to rapidly produce differentiated osteoblasts and the lowest layer to continue growth and differentiation until an ulterior dissociation.

Electronic supplementary material

The online version of this article (10.1186/s13287-018-0942-x) contains supplementary material, which is available to authorized users.

In vitro cell response on CP-Ti surfaces functionalized with TGF-β1 inhibitory peptides

Osseointegration of implants is conversely related to the generation of a fibrous tissue capsule around the implant by the host environment. Although TGF-β1 plays many roles in regeneration processes, it is the cytokine to be mostly associated to the production of fibrotic tissue and thus, its inhibition has demonstrated to be beneficial to prevent several fibrotic reactions. Surface biofunctionalization enables the immobilization of biologically active molecules on an implant surface to tailor the biological response of the host. Here, we studied in vitro biological effects of biofunctionalized CP-Ti surfaces with a TGF-β1 inhibitor peptide, P144. A reliable biofunctionalization process that tethers P144 peptides to commercially pure titanium was developed. Differentiation of human mesenchymal stem cells, osteoblasts and fibroblasts on P144-functionalized and control surfaces was assessed at the gene expression and protein production levels. Results showed that P144-functionalized surfaces reduced expression and production of fibrotic differentiation markers and increased osteoblastic differentiation markers. Therefore, biofunctionalization of surfaces with TGF-β1 inhibitor peptides are an alternative promising strategy for inducing osseointegration around medical devices and implants.

Biology and treatment of myeloma related bone disease

Myeloma bone disease (MBD) is the most common complication of multiple myeloma (MM), resulting in skeleton-related events (SREs) such as severe bone pain, pathologic fractures, vertebral collapse, hypercalcemia, and spinal cord compression that cause significant morbidity and mortality. It is due to an increased activity of osteoclasts coupled to the suppressed bone formation by osteoblasts. Novel molecules and pathways that are implicated in osteoclast activation and osteoblast inhibition have recently been described, including the receptor activator of nuclear factor-kB ligand/osteoprotegerin pathway, activin-A and the wingless-type signaling inhibitors, dickkopf-1 (DKK-1) and sclerostin. These molecules interfere with tumor growth and survival, providing possible targets for the development of novel drugs for the management of lytic disease in myeloma but also for the treatment of MM itself. Currently, bisphosphonates are the mainstay of the treatment of myeloma bone disease although several novel agents such as denosumab and sotatercept appear promising. This review focuses on recent advances in MBD pathophysiology and treatment, in addition to the established therapeutic guidelines.

Mechanisms of bone destruction in multiple myeloma

Osteolytic bone disease is a frequent complication of multiple myeloma, resulting in skeletal complications that are a significant cause of morbidity and mortality. It is the result of an increased activity of osteoclasts, which is not followed by reactive bone formation by osteoblasts. Recent studies have revealed novel molecules and pathways that are implicated in osteoclast activation and osteoblast inhibition. Among them, the most important include the receptor activator of nuclear factor-kappa B ligand/osteoprotegerin pathway, the macrophage inflammatory proteins and the activin-A that play a crucial role in osteoclast stimulation in myeloma, while the wingless-type (Wnt) signalling inhibitors (sclerostin and dickkopf-1) along with the growth factor independence-1 are considered the most important factors for the osteoblast dysfunction of myeloma patients. Finally, the role of osteocytes, which is the key cell for normal bone remodelling, has also revealed during the last years through their interaction with myeloma cells that leads to their apoptosis and the release of RANKL and sclerostin maintaining bone loss in these patients. This review focuses on the latest available data for the mechanisms of bone destruction in multiple myeloma.

Advances and challenges in stem cell culture

Stem cells (SCs) hold great promise for cell therapy, tissue engineering, and regenerative medicine as well as pharmaceutical and biotechnological applications. They have the capacity to self-renew and the ability to differentiate into specialized cell types depending upon their source of isolation. However, use of SCs for clinical applications requires a high quality and quantity of cells. This necessitates large-scale expansion of SCs followed by efficient and homogeneous differentiation into functional derivatives. Traditional methods for maintenance and expansion of cells rely on two-dimensional (2-D) culturing techniques using plastic culture plates and xenogenic media. These methods provide limited expansion and cells tend to lose clonal and differentiation capacity upon long-term passaging. Recently, new approaches for the expansion of SCs have emphasized three-dimensional (3-D) cell growth to mimic the in vivo environment. This review provides a comprehensive compendium of recent advancements in culturing SCs using 2-D and 3-D techniques involving spheroids, biomaterials, and bioreactors. In addition, potential challenges to achieve billion-fold expansion of cells are discussed.

Suppression of osteoblast-related genes during osteogenic differentiation of adipose tissue derived stromal cells

Recent studies indicated a lower osteogenic differentiation potential of adipose tissue-derived stromal cells (ASCs) compared to bone marrow derived mesenchymal stromal cells. The aim of this study was to evaluate the effects of potent combinations of highly osteogenic bone morphogenetic proteins (BMPs) in order to enhance the osteogenic differentiation potential of ASCs. Human ASCs were cultured for 10 days in the presence of osteogenic medium consisting of dexamethasone, ß-glycerophosphate and ascorbat-2-phosphate (OM) supplemented with BMP-2, BMP-6, BMP-9+IGF-2 and BMP-2,-6,-9 (day 1+2: 50 ng/ml, days 3-6: 100 ng/ml, days 7-10: 200 ng/ml). The formation of the osteoblast phenotype was evaluated by quantification of osteoblast-related marker genes using real-time polymerase chain reaction (RT-PCR). Matrix mineralization was assessed by Alizarin Red S staining. Statistical analysis was carried out using the one-way analysis of variance (ANOVA) followed by the Scheffe's post hoc procedure. Osteogenic medium (OM) significantly increased the expression of alkaline phosphatase (ALP) and osteocalcin (p < 0.05) and led to a stable matrix mineralization. Under the influence of BMP-9+IGF-2 and BMP-2,-6,-9 the ALP expression further increased compared to ASCs cultured with OM only (p < 0.01). However, multiple osteogenic markers showed no change or decreased under the influence of OM and BMP combinations (p < 0.05). The current results indicate a restricted osteogenic differentiation potential of ASCs and suggest careful reconsideration of their use in bone tissue engineering applications.

Culture & differentiation of mesenchymal stem cell into osteoblast on degradable biomedical composite scaffold: In vitro study

Background & objectives:

There is a significant bone tissue loss in patients from diseases and traumatic injury. The current autograft transplantation gold standard treatment has drawbacks, namely donor site morbidity and limited supply. The field of tissue engineering has emerged with a goal to provide alternative sources for transplantations to bridge this gap between the need and lack of bone graft. The aim of this study was to prepare biocomposite scaffolds based on chitosan (CHT), polycaprolactone (PCL) and hydroxyapatite (HAP) by freeze drying method and to assess the role of scaffolds in spatial organization, proliferation, and osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro, in order to achieve bone graft substitutes with improved physical-chemical and biological properties.

Methods:

Pure chitosan (100CHT) and composites (40CHT/HAP, 30CHT/HAP/PCL and 25CHT/HAP/PCL scaffolds containing 40, 30, 25 parts per hundred resin (phr) filler, respectively) in acetic acid were freeze dried and the porous foams were studied for physicochemical and in vitro biological properties.

Results:

Scanning electron microscope (SEM) images of the scaffolds showed porous microstructure (20-300 μm) with uniform pore distribution in all compositions. Materials were tested under compressive load in wet condition (using phosphate buffered saline at pH 7.4). The in vitro studies showed that all the scaffold compositions supported mesenchymal stem cell attachment, proliferation and differentiation as visible from SEM images, [3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium bromide] (MTT) assay, alkaline phosphatase (ALP) assay and quantitative reverse transcription (qRT)-PCR.

Interpretation & conclusions:

Scaffold composition 25CHT/HAP/PCL showed better biomechanical and osteoinductive properties as evident by mechanical test and alkaline phosphatase activity and osteoblast specific gene expression studies. This study suggests that this novel degradable 3D composite may have great potential to be used as scaffold in bone tissue engineering.

Mechanical Properties of Additively Manufactured Thick Honeycombs

Honeycombs resemble the structure of a number of natural and biological materials such as cancellous bone, wood, and cork. Thick honeycomb could be also used for energy absorption applications. Moreover, studying the mechanical behavior of honeycombs under in-plane loading could help understanding the mechanical behavior of more complex 3D tessellated structures such as porous biomaterials. In this paper, we study the mechanical behavior of thick honeycombs made using additive manufacturing techniques that allow for fabrication of honeycombs with arbitrary and precisely controlled thickness. Thick honeycombs with different wall thicknesses were produced from polylactic acid (PLA) using fused deposition modelling, i.e., an additive manufacturing technique. The samples were mechanically tested in-plane under compression to determine their mechanical properties. We also obtained exact analytical solutions for the stiffness matrix of thick hexagonal honeycombs using both Euler-Bernoulli and Timoshenko beam theories. The stiffness matrix was then used to derive analytical relationships that describe the elastic modulus, yield stress, and Poisson’s ratio of thick honeycombs. Finite element models were also built for computational analysis of the mechanical behavior of thick honeycombs under compression. The mechanical properties obtained using our analytical relationships were compared with experimental observations and computational results as well as with analytical solutions available in the literature. It was found that the analytical solutions presented here are in good agreement with experimental and computational results even for very thick honeycombs, whereas the analytical solutions available in the literature show a large deviation from experimental observation, computational results, and our analytical solutions.

Osteogenic differentiation of human mesenchymal stem cells promotes mineralization within a biodegradable peptide hydrogel

An attractive strategy for the regeneration of tissues has been the use of extracellular matrix analogous biomaterials. Peptide-based fibrillar hydrogels have been shown to mimic the structure of extracellular matrix offering cells a niche to undertake their physiological functions. In this study, the capability of an ionic-complementary peptide FEFEFKFK (F, E, and K are phenylalanine, glutamic acid, and lysine, respectively) hydrogel to host human mesenchymal stem cells in three dimensions and induce their osteogenic differentiation is demonstrated. Assays showed sustained cell viability and proliferation throughout the hydrogel over 12 days of culture and these human mesenchymal stem cells differentiated into osteoblasts simply upon addition of osteogenic stimulation. Differentiated osteoblasts synthesized key bone proteins, including collagen-1 (Col-1), osteocalcin, and alkaline phosphatase. Moreover, mineralization occurred within the hydrogel. The peptide hydrogel is a naturally biodegradable material as shown by oscillatory rheology and reversed-phase high-performance liquid chromatography, where both viscoelastic properties and the degradation of the hydrogel were monitored over time, respectively. These findings demonstrate that a biodegradable octapeptide hydrogel can host and induce the differentiation of stem cells and has the potential for the regeneration of hard tissues such as alveolar bone.

Alcohol-induced suppression of KDM6B dysregulates the mineralization potential in dental pulp stem cells

Epigenetic changes, such as alteration of DNA methylation patterns, have been proposed as a molecular mechanism underlying the effect of alcohol on the maintenance of adult stem cells. We have performed genome-wide gene expression microarray and DNA methylome analysis to identify molecular alterations via DNA methylation changes associated with exposure of human dental pulp stem cells (DPSCs) to ethanol (EtOH). By combined analysis of the gene expression and DNA methylation, we have found a significant number of genes that are potentially regulated by EtOH-induced DNA methylation. As a focused approach, we have also performed a pathway-focused RT-PCR array analysis to examine potential molecular effects of EtOH on genes involved in epigenetic chromatin modification enzymes, fibroblastic markers, and stress and toxicity pathways in DPSCs. We have identified and verified that lysine specific demethylase 6B (KDM6B) was significantly dysregulated in DPSCs upon EtOH exposure. EtOH treatment during odontogenic/osteogenic differentiation of DPSCs suppressed the induction of KDM6B with alterations in the expression of differentiation markers. Knockdown of KDM6B resulted in a marked decrease in mineralization from implanted DPSCs in vivo. Furthermore, an ectopic expression of KDM6B in EtOH-treated DPSCs restored the expression of differentiation-related genes. Our study has demonstrated that EtOH-induced inhibition of KDM6B plays a role in the dysregulation of odontogenic/osteogenic differentiation in the DPSC model. This suggests a potential molecular mechanism for cellular insults of heavy alcohol consumption that can lead to decreased mineral deposition potentially associated with abnormalities in dental development and also osteopenia/osteoporosis, hallmark features of fetal alcohol spectrum disorders.

Priming the Surface of Orthopedic Implants for Osteoblast Attachment in Bone Tissue Engineering

The development of better orthopedic implants is incessant. While current implants can function reliably in the human body for a long period of time, there are still a significant number of cases for which the implants can fail prematurely due to poor osseointegration of the implant with native bone. Increasingly, it is recognized that it is extremely important to facilitate the attachment of osteoblasts on the implant so that a proper foundation of extracellular matrix (ECM) can be laid down for the growth of new bone tissue. In order to facilitate the osseointegration of the implant, both the physical nanotopography and chemical functionalization of the implant surface have to be optimized. In this short review, however, we explore how simple chemistry procedures can be used to functionalize the surfaces of three major classes of orthopedic implants, i.e. ceramics, metals, and polymers, so that the attachment of osteoblasts on implants can be facilitated in order to promote implant osseointegration.

Enhanced differentiation of human osteoblasts on Ti surfaces pre-treated with human whole blood

Early and effective integration of a metal implant into bone tissue is of crucial importance for its long-term stability. While different material properties including surface roughness and wettability but also initial blood-implant surface interaction are known to influence this osseointegration, implications of the latter process are still poorly understood. In this study, early interaction between blood and the implant surface and how this affects the mechanism of osseointegration were investigated. For this, blood coagulation on a micro-roughened hydrophobic titanium (Ti) surface (SLA-H(phob)) and on a hydrophilic micro-roughened Ti surface with nanostructures (SLActive-H(phil)NS), as well as the effects of whole human blood pre-incubation of these two surfaces on the differentiation potential of primary human bone cells (HBC) was assessed. Interestingly, pre-incubation with blood resulted in a dense fibrin network over the entire surface on SLActive-H(phil)NS but only in single patches of fibrin and small isolated fibre complexes on SLA-H(phob). On SLActive-H(phil)NS, the number of HBCs attaching to the fibrin network was greatly increased and the cells displayed enhanced cell contact to the fibrin network. Notably, HBCs displayed increased expression of the osteogenic marker proteins alkaline phosphatase and collagen-I when cultivated on both surfaces upon blood pre-incubation. Additionally, blood pre-treatment promoted an earlier and enhanced mineralization of HBCs cultivated on SLActive-H(phil)NS compared to SLA-H(phob). The results presented in this study therefore suggest that blood pre-incubation of implant surfaces mimics a more physiological situation, eventually providing a more predictive in vitro model for the evaluation of novel bone implant surfaces.