The cellulose-binding domain (CBD(Cex)) of an exoglucanase from Cellulomonas fimi: production in Escherichia coli and characterization of the polypeptide

Genetically engineered bacterial biofilm materials enhances portable whole cell sensing

In recent years, whole-cell biosensors (WCBs) have emerged as a potent approach for environmental monitoring and on-site analyte detection. These biosensors harness the biological apparatus of microorganisms to identify specific analytes, offering advantages in sensitivity, specificity, and real-time monitoring capabilities. A critical hurdle in biosensor development lies in ensuring the robust attachment of cells to surfaces, a crucial step for practical utility. In this study, we present a comprehensive approach to tackle this challenge via engineering Escherichia coli cells for immobilization on paper through the Curli biofilm pathway. Furthermore, incorporating a cellulose-binding peptide domain to the CsgA biofilm protein enhances cell adhesion to paper surfaces, consequently boosting biosensor efficacy. To demonstrate the versatility of this platform, we developed a WCB for copper, optimized to exhibit a discernible response, even with the naked eye. To confirm its suitability for practical field use, we characterized our copper sensor under various environmental conditions-temperature, salinity, and pH-to mimic real-world scenarios. The biosensor-equipped paper discs can be freeze-dried for deployment in on-site applications, providing a practical method for long-term storage without loss of sensitivity paper discs demonstrate sustained functionality and viability even after months of storage with 5 μM limit of detection for copper with visible-to-naked-eye signal levels. Biofilm-mediated surface attachment and analyte sensing can be independently engineered, allowing for flexible utilization of this platform as required. With the implementation of copper sensing as a proof-of-concept study, we underscore the potential of WCBs as a promising avenue for the on-site detection of a multitude of analytes.

Dinoflagellate Amphiesmal Dynamics: Cell Wall Deposition with Ecdysis and Cellular Growth

Dinoflagellates are a major aquatic protist group with amphiesma, multiple cortical membranous "cell wall" layers that contain large circum-cortical alveolar sacs (AVs). AVs undergo extensive remodeling during cell- and life-cycle transitions, including ecdysal cysts (ECs) and resting cysts that are important in some harmful algal bloom initiation-termination. AVs are large cortical vesicular compartments, within which are elaborate cellulosic thecal plates (CTPs), in thecate species, and the pellicular layer (PL). AV-CTPs provide cellular mechanical protection and are targets of vesicular transport that are replaced during EC-swarmer cell transition, or with increased deposition during the cellular growth cycle. AV-PL exhibits dynamical-replacement with vesicular trafficking that are orchestrated with amphiesmal chlortetracycline-labeled Ca²⁺ stores signaling, integrating cellular growth with different modes of cell division cycle/progression. We reviewed the dynamics of amphiesma during different cell division cycle modes and life cycle stages, and its multifaceted regulations, focusing on the regulatory and functional readouts, including the coral-zooxanthellae interactions.

Biocompatible Optical Fibers Made of Regenerated Cellulose and Recombinant Cellulose-Binding Spider Silk

The fabrication of green optical waveguides based on cellulose and spider silk might allow the processing of novel biocompatible materials. Regenerated cellulose fibers are used as the core and recombinantly produced spider silk proteins eADF4(C16) as the cladding material. A detected delamination between core and cladding could be circumvented by using a modified spider silk protein with a cellulose-binding domain-enduring permanent adhesion between the cellulose core and the spider silk cladding. The applied spider silk materials were characterized optically, and the theoretical maximum data rate was determined. The results show optical waveguide structures promising for medical applications, for example, in the future.

Chitin-Active Lytic Polysaccharide Monooxygenases Are Rare in Cellulomonas Species

Cellulomonas flavigena is a saprotrophic bacterium that encodes, within its genome, four predicted lytic polysaccharide monooxygenases (LPMOs) from Auxiliary Activity family 10 (AA10). We showed previously that three of these cleave the plant polysaccharide cellulose by oxidation at carbon-1 (J. Li, L. Solhi, E.D. Goddard-Borger, Y. Mattieu et al., Biotechnol Biofuels 14:29, 2021, https://doi.org/10.1186/s13068-020-01860-3). Here, we present the biochemical characterization of the fourth C. flavigena AA10 member (CflaLPMO10D) as a chitin-active LPMO. Both the full-length CflaLPMO10D-Carbohydrate-Binding Module family 2 (CBM2) and catalytic module-only proteins were produced in Escherichia coli using the native general secretory (Sec) signal peptide. To quantify chitinolytic activity, we developed a high-performance anion-exchange chromatography-pulsed amperometric detection (HPAEC-PAD) method as an alternative to the established hydrophilic interaction liquid ion chromatography coupled with UV detection (HILIC-UV) method for separation and detection of released oxidized chito-oligosaccharides. Using this method, we demonstrated that CflaLPMO10D is strictly active on the β-allomorph of chitin, with optimal activity at pH 5 to 6 and a preference for ascorbic acid as the reducing agent. We also demonstrated the importance of the CBM2 member for both mediating enzyme localization to substrates and prolonging LPMO activity. Together with previous work, the present study defines the distinct substrate specificities of the suite of C. flavigena AA10 members. Notably, a cross-genome survey of AA10 members indicated that chitinolytic LPMOs are, in fact, rare among Cellulomonas bacteria. IMPORTANCE Species from the genus Cellulomonas have a long history of study due to their roles in biomass recycling in nature and corresponding potential as sources of enzymes for biotechnological applications. Although Cellulomonas species are more commonly associated with the cleavage and utilization of plant cell wall polysaccharides, here, we show that C. flavigena produces a unique lytic polysaccharide monooxygenase with activity on β-chitin, which is found, for example, in arthropods. The limited distribution of orthologous chitinolytic LPMOs suggests adaptation of individual cellulomonads to specific nutrient niches present in soil ecosystems. This research provides new insight into the biochemical specificity of LPMOs in Cellulomonas species and related bacteria, and it raises new questions about the physiological function of these enzymes.

Tracking Bacterial Nanocellulose in Animal Tissues by Fluorescence Microscopy

The potential of nanomaterials in food technology is nowadays well-established. However, their commercial use requires a careful risk assessment, in particular concerning the fate of nanomaterials in the human body. Bacterial nanocellulose (BNC), a nanofibrillar polysaccharide, has been used as a food product for many years in Asia. However, given its nano-character, several toxicological studies must be performed, according to the European Food Safety Agency’s guidance. Those should especially answer the question of whether nanoparticulate cellulose is absorbed in the gastrointestinal tract. This raises the need to develop a screening technique capable of detecting isolated nanosized particles in biological tissues. Herein, the potential of a cellulose-binding module fused to a green fluorescent protein (GFP–CBM) to detect single bacterial cellulose nanocrystals (BCNC) obtained by acid hydrolysis was assessed. Adsorption studies were performed to characterize the interaction of GFP–CBM with BNC and BCNC. Correlative electron light microscopy was used to demonstrate that isolated BCNC may be detected by fluorescence microscopy. The uptake of BCNC by macrophages was also assessed. Finally, an exploratory 21-day repeated-dose study was performed, wherein Wistar rats were fed daily with BNC. The presence of BNC or BCNC throughout the GIT was observed only in the intestinal lumen, suggesting that cellulose particles were not absorbed. While a more comprehensive toxicological study is necessary, these results strengthen the idea that BNC can be considered a safe food additive.

Living materials with programmable functionalities grown from engineered microbial co-cultures

Biological systems assemble living materials that are autonomously patterned, can self-repair and can sense and respond to their environment. The field of engineered living materials aims to create novel materials with properties similar to those of natural biomaterials using genetically engineered organisms. Here, we describe an approach to fabricating functional bacterial cellulose-based living materials using a stable co-culture of Saccharomyces cerevisiae yeast and bacterial cellulose-producing Komagataeibacter rhaeticus bacteria. Yeast strains can be engineered to secrete enzymes into bacterial cellulose, generating autonomously grown catalytic materials and enabling DNA-encoded modification of bacterial cellulose bulk properties. Alternatively, engineered yeast can be incorporated within the growing cellulose matrix, creating living materials that can sense and respond to chemical and optical stimuli. This symbiotic culture of bacteria and yeast is a flexible platform for the production of bacterial cellulose-based engineered living materials with potential applications in biosensing and biocatalysis.

Four cellulose-active lytic polysaccharide monooxygenases from Cellulomonas species

BACKGROUND

The discovery of lytic polysaccharide monooxygenases (LPMOs) has fundamentally changed our understanding of microbial lignocellulose degradation. Cellulomonas bacteria have a rich history of study due to their ability to degrade recalcitrant cellulose, yet little is known about the predicted LPMOs that they encode from Auxiliary Activity Family 10 (AA10).

RESULTS

Here, we present the comprehensive biochemical characterization of three AA10 LPMOs from Cellulomonas flavigena (CflaLPMO10A, CflaLPMO10B, and CflaLPMO10C) and one LPMO from Cellulomonas fimi (CfiLPMO10). We demonstrate that these four enzymes oxidize insoluble cellulose with C1 regioselectivity and show a preference for substrates with high surface area. In addition, CflaLPMO10B, CflaLPMO10C, and CfiLPMO10 exhibit limited capacity to perform mixed C1/C4 regioselective oxidative cleavage. Thermostability analysis indicates that these LPMOs can refold spontaneously following denaturation dependent on the presence of copper coordination. Scanning and transmission electron microscopy revealed substrate-specific surface and structural morphological changes following LPMO action on Avicel and phosphoric acid-swollen cellulose (PASC). Further, we demonstrate that the LPMOs encoded by Cellulomonas flavigena exhibit synergy in cellulose degradation, which is due in part to decreased autoinactivation.

CONCLUSIONS

Together, these results advance understanding of the cellulose utilization machinery of historically important Cellulomonas species beyond hydrolytic enzymes to include lytic cleavage. This work also contributes to the broader mapping of enzyme activity in Auxiliary Activity Family 10 and provides new biocatalysts for potential applications in biomass modification.

A Soluble, Folded Protein without Charged Amino Acid Residues

Charges are considered an integral part of protein structure and function, enhancing solubility and providing specificity in molecular interactions. We wished to investigate whether charged amino acids are indeed required for protein biogenesis and whether a protein completely free of titratable side chains can maintain solubility, stability, and function. As a model, we used a cellulose-binding domain from Cellulomonas fimi, which, among proteins of more than 100 amino acids, presently is the least charged in the Protein Data Bank, with a total of only four titratable residues. We find that the protein shows a surprising resilience toward extremes of pH, demonstrating stability and function (cellulose binding) in the pH range from 2 to 11. To ask whether the four charged residues present were required for these properties of this protein, we altered them to nontitratable ones. Remarkably, this chargeless protein is produced reasonably well in Escherichia coli, retains its stable three-dimensional structure, and is still capable of strong cellulose binding. To further deprive this protein of charges, we removed the N-terminal charge by acetylation and studied the protein at pH 2, where the C-terminus is effectively protonated. Under these conditions, the protein retains its function and proved to be both soluble and have a reversible folding-unfolding transition. To the best of our knowledge, this is the first time a soluble, functional protein with no titratable side chains has been produced.

Engineering control of bacterial cellulose production using a genetic toolkit and a new cellulose-producing strain

Bacterial cellulose is a strong and ultrapure form of cellulose produced naturally by several species of the Acetobacteraceae Its high strength, purity, and biocompatibility make it of great interest to materials science; however, precise control of its biosynthesis has remained a challenge for biotechnology. Here we isolate a strain of Komagataeibacter rhaeticus (K. rhaeticus iGEM) that can produce cellulose at high yields, grow in low-nitrogen conditions, and is highly resistant to toxic chemicals. We achieved external control over its bacterial cellulose production through development of a modular genetic toolkit that enables rational reprogramming of the cell. To further its use as an organism for biotechnology, we sequenced its genome and demonstrate genetic circuits that enable functionalization and patterning of heterologous gene expression within the cellulose matrix. This work lays the foundations for using genetic engineering to produce cellulose-based materials, with numerous applications in basic science, materials engineering, and biotechnology.

Purification and simultaneous immobilization of Arabidopsis thaliana hydroxynitrile lyase using a family 2 carbohydrate-binding module

Tedious, time- and labor-intensive protein purification and immobilization procedures still represent a major bottleneck limiting the widespread application of enzymes in synthetic chemistry and industry. We here exemplify a simple strategy for the direct site-specific immobilization of proteins from crude cell extracts by fusion of a family 2 carbohydrate-binding module (CBM) derived from the exoglucanase/xylanase Cex from Cellulomonas fimi to a target enzyme. By employing a tripartite fusion protein consisting of the CBM, a flavin-based fluorescent protein (FbFP), and the Arabidopsis thaliana hydroxynitrile lyase (AtHNL), binding to cellulosic carrier materials can easily be monitored via FbFP fluorescence. Adsorption properties (kinetics and quantities) were studied for commercially available Avicel PH-101 and regenerated amorphous cellulose (RAC) derived from Avicel. The resulting immobilizates showed similar activities as the wild-type enzyme but displayed increased stability in the weakly acidic pH range. Finally, Avicel, RAC and cellulose acetate (CA) preparations were used for the synthesis of (R)-mandelonitrile in micro-aqueous methyl tert-butyl ether (MTBE) demonstrating the applicability and stability of the immobilizates for biotransformations in both aqueous and organic reaction systems.

The use of carbohydrate binding modules (CBMs) to monitor changes in fragmentation and cellulose fiber surface morphology during cellulase- and Swollenin-induced deconstruction of lignocellulosic substrates

Although the actions of many of the hydrolytic enzymes involved in cellulose hydrolysis are relatively well understood, the contributions that amorphogenesis-inducing proteins might contribute to cellulose deconstruction are still relatively undefined. Earlier work has shown that disruptive proteins, such as the non-hydrolytic non-oxidative protein Swollenin, can open up and disaggregate the less-ordered regions of lignocellulosic substrates. Within the cellulosic fraction, relatively disordered, amorphous regions known as dislocations are known to occur along the length of the fibers. It was postulated that Swollenin might act synergistically with hydrolytic enzymes to initiate biomass deconstruction within these dislocation regions. Carbohydrate binding modules (CBMs) that preferentially bind to cellulosic substructures were fluorescently labeled. They were imaged, using confocal microscopy, to assess the distribution of crystalline and amorphous cellulose at the fiber surface, as well as to track changes in surface morphology over the course of enzymatic hydrolysis and fiber fragmentation. Swollenin was shown to promote targeted disruption of the cellulosic structure at fiber dislocations.

Characterization of an endo-processive-type xyloglucanase having a β-1,4-glucan-binding module and an endo-type xyloglucanase from Streptomyces avermitilis

We cloned two glycoside hydrolase family 74 genes, the sav_1856 gene and the sav_2574 gene, from Streptomyces avermitilis NBRC14893 and characterized the resultant recombinant proteins. The sav_1856 gene product (SaGH74A) consisted of a catalytic domain and a family 2 carbohydrate-binding module at the C terminus, while the sav_2574 gene product (SaGH74B) consisted of only a catalytic domain. SaGH74A and SaGH74B were expressed successfully and had molecular masses of 92 and 78 kDa, respectively. Both recombinant proteins were xyloglucanases. SaGH74A had optimal activity at 60°C and pH 5.5, while SaGH74B had optimal activity at 55°C and pH 6.0. SaGH74A was stable over a broad pH range (pH 4.5 to 9.0), whereas SaGH74B was stable over a relatively narrow pH range (pH 6.0 to 6.5). Analysis of the hydrolysis products of tamarind xyloglucan and xyloglucan-derived oligosaccharides indicated that SaGH74A was endo-processive, while SaGH74B was a typical endo-enzyme. The C terminus of SaGH74A, which was annotated as a carbohydrate-binding module, bound to β-1,4-linked glucan-containing soluble polysaccharides such as hydroxyethyl cellulose, barley glucan, and xyloglucan.

Very high-level production and export in Escherichia coli of a cellulose binding domain for use in a generic secretion-affinity fusion system

A novel expression vector pTugA, previously constructed in our laboratory, was modified to provide kanamycin resistance (pTugK) and used to direct the synthesis of polypeptides as fusions with the C- or N-terminus of a cellulose binding domain which serves as the affinity tag in a novel secretion-affinity fusion system. Fed-batch fermentation strategies were applied to production in recombinant E. coli TOPP5 of the cellulose binding domain (CBD) from the Cellulomonas fimi cellulase Cex. The pTugK expression vector, which codes for the Cex leader sequence that directs the recombinant protein to the periplasm of E. coli, was shown to remain stable at very high-cell densities. Recombinant cell densities in excess of 90 g (dry cell weight)/L were achieved using media and feed solutions optimized using a 2(n) factorial design. Optimization of inducer (isophenyl-thio-beta-D-galactopyranoside) concentration and the time of induction led to soluble, fully active CBD(Cex) production levels in excess of 8 g/L.

Direct demonstration of the flexibility of the glycosylated proline-threonine linker in the Cellulomonas fimi Xylanase Cex through NMR spectroscopic analysis

The modular xylanase Cex (or CfXyn10A) from Cellulomonas fimi consists of an N-terminal catalytic domain and a C-terminal cellulose-binding domain, joined by a glycosylated proline-threonine (PT) linker. To characterize the conformation and dynamics of the Cex linker and the consequences of its modification, we have used NMR spectroscopy to study full-length Cex in its nonglycosylated ( approximately 47 kDa) and glycosylated ( approximately 51 kDa) forms. The PT linker lacks any predominant structure in either form as indicated by random coil amide chemical shifts. Furthermore, heteronuclear (1)H-(15)N nuclear Overhauser effect relaxation measurements demonstrate that the linker is flexible on the ns-to-ps time scale and that glycosylation partially dampens this flexibility. The catalytic and cellulose-binding domains also exhibit identical amide chemical shifts whether in isolation or in the context of either unmodified or glycosylated full-length Cex. Therefore, there are no noncovalent interactions between the two domains of Cex or between either domain and the linker. This conclusion is supported by the distinct (15)N relaxation properties of the two domains, as well as their differential alignment within a magnetic field by Pf1 phage particles. These data demonstrate that the PT linker is a flexible tether, joining the structurally independent catalytic and cellulose-binding domains of Cex in an ensemble of conformations; however, more extended forms may predominate because of restrictions imparted by the alternating proline residues. This supports the postulate that the binding-domain anchors Cex to the surface of cellulose, whereas the linker provides flexibility for the catalytic domain to hydrolyze nearby hemicellulose (xylan) chains.

One-step Purification and Immobilization in Cellulose of the GroEL Apical Domain Fused to a Carbohydrate-binding Module and its use in Protein Refolding

The apical domain of the chaperonin, GroEL, fused to the carbohydrate binding module type II, CBD(Cex), of Cellulomonas fimi, was expressed in Escherichia coli. The recombinant protein, soluble or from inclusion bodies, was directly purified and immobilized in microcrystalline cellulose particles or cellulose fabric membranes. Assisted refolding of rhodanese by the immobilized mini-chaperone showed a two-fold improvement as compared to a control. Using chromatographic refolding, 35% of rhodanese activity was recovered in only 5 min (mean residence time) as compared to 17% for spontaneous refolding. This mini-chaperone immobilized in cellulose could be a cost-efficient method to refold recombinant proteins expressed as inclusion bodies.

Toward an aggregated understanding of enzymatic hydrolysis of cellulose: noncomplexed cellulase systems

Information pertaining to enzymatic hydrolysis of cellulose by noncomplexed cellulase enzyme systems is reviewed with a particular emphasis on development of aggregated understanding incorporating substrate features in addition to concentration and multiple cellulase components. Topics considered include properties of cellulose, adsorption, cellulose hydrolysis, and quantitative models. A classification scheme is proposed for quantitative models for enzymatic hydrolysis of cellulose based on the number of solubilizing activities and substrate state variables included. We suggest that it is timely to revisit and reinvigorate functional modeling of cellulose hydrolysis, and that this would be highly beneficial if not necessary in order to bring to bear the large volume of information available on cellulase components on the primary applications that motivate interest in the subject.

The glucanases of Cellulomonas

Cellulomonas is a unique bacterium possessing not only the capacity to degrade various carbohydrates, such as starch, xylan and cellulose, but crystalline cellulose as well. It has developed a complex battery of glucanases to deal with substrates possessing such extensive microheterogeneities. Some of these enzymes are multifunctional, as well as cross inducible, possessing a multi-domain structure; these enzymes are thought to have arisen by the shuffling of these domains. Intergeneric hybrids have been constructed between Cellulomonas and Zymomonas so as to enhance the industrial potential of this organism. This review examines the unique features of this microorganism and evaluates its key role in the conversion of complex wastes to useful products, by virtue of its unusual attributes.

Carbohydrate-binding modules recognize fine substructures of cellulose

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Co-operative binding of triplicate carbohydrate-binding modules from a thermophilic xylanase

Family 6 carbohydrate-binding modules were amplified by polymerase chain reaction (PCR) from Clostridium stercorarium strain NCIB11754 genomic DNA as a triplet. Individually, these modules bound to xylooligosaccharides and cellooligosaccharides with affinities varying from approximately 3 x 10(3) M(-1) to approximately 1 x 10(5) M(-1). Tandem and triplet combinations of these modules bound co-operatively to soluble xylan and insoluble cellulose to give approximately 20- to approximately 40-fold increases in affinity relative to the individual modules. This co-operativity was an avidity effect resulting from the modules within the tandems and triplet interacting simultaneously with proximal binding sites on the polysaccharides. This occurred by both intrachain and interchain interactions. The duplication or triplication of modules appears to be linked to the growth temperature of the organism; co-operativity in these multiplets may compensate for the loss of affinity at higher temperatures.

Characterization of a functional soluble form of a Brassica napus membrane-anchored endo-1,4-beta-glucanase heterologously expressed in Pichia pastoris

The Brassica napus gene, Cel16, encodes a membrane-anchored endo-1,4-beta-glucanase with a deduced molecular mass of 69 kD. As for other membrane-anchored endo-1,4-beta-glucanases, Cel16 consists of a predicted intracellular, charged N terminus (methionine(1)-lysine(70)), a hydrophobic transmembrane domain (isoleucine(71)-valine(93)), and a periplasmic catalytic core (lysine(94)-proline(621)). Here, we report the functional analysis of Delta(1-90)Cel16, the N terminally truncated Cel16, missing residues 1 through 90 and comprising the catalytic domain of Cel16 expressed recombinantly in the methylotrophic yeast Pichia pastoris as a soluble protein. A two-step purification protocol yielded Delta(1-90)Cel16 in a pure form. The molecular mass of Delta(1-90)Cel16, when determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, was about 130 kD and about 60 kD after enzymatic removal of N-glycans, fitting the expected molecular mass of 59 kD. Delta(1-90)Cel16 was highly N glycosylated as compared with the native B. napus Cel16 protein. Delta(1-90)Cel16 had a pH optimum of 6.0. The activity of Delta(1-90)Cel16 was inhibited by EDTA and exhibited a strong dependence on calcium. Delta(1-90)Cel16 showed substrate specificity for low substituted carboxymethyl-cellulose and amorphous cellulose. It did not hydrolyze crystalline cellulose, xyloglycan, xylan, (1-->3),(1-->4)-beta-D-glucan, the highly substituted hydroxyethylcellulose, or the oligosaccharides cellotriose, cellotetraose, cellopentaose, or xylopentaose. Size exclusion analysis of Delta(1-90)Cel16-hydrolyzed carboxymethylcellulose showed that Delta(1-90)Cel16 is a true endo-acting glucanase.

Cellulose-binding modules from extracellular matrix proteins of Dictyostelium discoideum stalk and sheath

Cellulose-binding modules (CBMs) of two extracellular matrix proteins, St15 and ShD, from the slime mold Dictyostelium discoideum were expressed in Escherichia coli. The expressed proteins were purified to > 98% purity by extracting inclusion bodies at pH 11.5 and refolding proteins at pH 7.5. The two refolded CBMs bound tightly to amorphous phosphoric acid swollen cellulose (PASC), but had a low affinity toward xylan. Neither protein exhibited cellulase activity. St15, the stalk-specific protein, had fourfold higher binding affinity toward microcrystalline cellulose (Avicel) than the sheath-specific ShD CBM. St15 is unusual in that it consists of a solitary CBM homologous to family IIa CBMs. Sequence analysis of ShD reveals three putative domains containing: (a) a C-terminal CBM homologous to family IIb CBMs; (b) a Pro/Thr-rich linker domain; and (c) a N-terminal Cys-rich domain. The biological functions and potential role of St15 and ShD in building extracellular matrices during D. discoideum development are discussed.

Addition of substrate-binding domains increases substrate-binding capacity and specific activity of a chitinase from Trichoderma harzianum

Chitinase Chit42 from Trichoderma harzianum CECT 2413 is considered to play an important role in the biocontrol activity of this fungus against plant pathogens. Chit42 lacks a chitin-binding domain (ChBD). We have produced hybrid chitinases with stronger chitin-binding capacity by fusing to Chit42 a ChBD from Nicotiana tabacum ChiA chitinase and the cellulose-binding domain from cellobiohydrolase II of Trichoderma reesei. The chimeric chitinases had similar activities towards soluble substrate but higher hydrolytic activity than the native chitinase on high molecular mass insoluble substrates such as ground chitin or chitin-rich fungal cell walls.

A family 2a carbohydrate-binding module suitable as an affinity tag for proteins produced in Pichia pastoris

The family 2a carbohydrate-binding module (CBM), Cel5ACBM2a, from the C-terminus of Cel5A from Cellulomonas fimi, and Xyn10ACBM2a, the family 2a CBM from the C-terminus of Xyn10A from C. fimi, were compared as fusion partners for proteins produced in the methylotrophic yeast Pichia pastoris. Gene fusions of murine stem-cell factor (SCF) with both CBMs were expressed in P. pastoris. The secreted SCF-Xyn10ACBM2a polypeptides were highly glycosylated and bound poorly to cellulose. In contrast, fusion of SCF to Cel5ACBM2a, which lacks potential N-linked glycosylation sites, resulted in the production of polypeptides which bound tightly to cellulose. Cloning and expression of these CBM2a in P. pastoris without a fusion partner confirmed that N-linked glycosylation at several sites was responsible for the poor cellulose binding. The nonglycosylated CBMs produced in E. coli had very similar cellulose-binding properties.

Properties and mutation analysis of the CelK cellulose-binding domain from the Clostridium thermocellum cellulosome

The family IV cellulose-binding domain of Clostridium thermocellum CelK (CBD(CelK)) was expressed in Escherichia coli and purified. It binds to acid-swollen cellulose (ASC) and bacterial microcrystalline cellulose (BMCC) with capacities of 16.03 and 3.95 micromol/g of cellulose and relative affinities (K(r)) of 2.33 and 9.87 liters/g, respectively. The CBD(CelK) is the first representative of family IV CBDs to exhibit an affinity for BMCC. The CBD(CelK) also binds to the soluble polysaccharides lichenin, glucomannan, and barley beta-glucan, which are substrates for CelK. It does not bind to xylan, galactomannan, and carboxymethyl cellulose. The CBD(CelK) contains 1 mol of calcium per mol. The CBD(CelK) has three thiol groups and one disulfide, reduction of which results in total loss of cellulose-binding ability. To reveal amino acid residues important for biological function of the domain and to investigate the role of calcium in the CBD(CelK) four highly conserved aromatic residues (Trp(56), Trp(94), Tyr(111), and Tyr(136)) and Asp(192) were mutated into alanines, giving the mutants W56A, W94A, Y111A, Y136A, and D192A. In addition 14 N-terminal amino acids were deleted, giving the CBD-N(CelK). The CBD-N(CelK) and D192A retained binding parameters close to that of the intact CBD(CelK), W56A and W94A totally lost the ability to bind to cellulose, Y136A bound to both ASC and BMCC but with significantly reduced binding capacity and K(r) and Y111A bound weakly to ASC and did not bind to BMCC. Mutations of the aromatic residues in the CBD(CelK) led to structural changes revealed by studying solubility, circular-dichroism spectra, dimer formation, and aggregation. Calcium content was drastically decreased in D192A. The results suggest that Asp192 is in the calcium-binding site of the CBD(CelK) and that calcium does not affect binding to cellulose. The 14 amino acids from the N terminus of the CBD(CelK) are not important for binding. Tyr136, corresponding to Cellulomonas fimi CenC CBD(N1) Y85, located near the binding cleft, might be involved in the formation of the binding surface, while Y111, W56A, and W94A are essential for the binding process by keeping the CBD(CelK) correctly folded.

Analysis of binding of the family 2a carbohydrate-binding module from Cellulomonas fimi xylanase 10A to cellulose: specificity and identification of functionally important amino acid residues

The family 2a carbohydrate-binding module (CBM2a) of xylanase 10A from Cellulomonas fimi binds to the crystalline regions of cellulose. It does not share binding sites with the N-terminal family 4 binding module (CBM4-1) from the cellulase 9B from C.fimi, a module that binds strictly to soluble sugars and amorphous cellulose. The binding of CBM2a to crystalline matrices is mediated by several residues on the binding face, including three prominent, solvent-exposed tryptophan residues. Binding to crystalline cellulose was analyzed by making a series of conservative (phenylalanine and tyrosine) and non-conservative substitutions (alanine) of each solvent-exposed tryptophan (W17, W54 and W72). Other residues on the binding face with hydrogen bonding potential were substituted with alanine. Each tryptophan plays a different role in binding; a tryptophan is essential at position 54, a tyrosine or tryptophan at position 17 and any aromatic residue at position 72. Other residues on the binding face, with the exception of N15, are not essential determinants of binding affinity. Given the specificity of CBM2a, the structure of crystalline cellulose and the dynamic nature of the binding of CBM2a, we propose a model for the interaction between the polypeptide and the crystalline surface.

Affinity electrophoresis for the identification and characterization of soluble sugar binding by carbohydrate-binding modules

Affinity electrophoresis was used to identify and quantify the interaction of carbohydrate-binding modules (CBMs) with soluble polysaccharides. Association constants determined by AE were in excellent agreement with values obtained by isothermal titration calorimetry and fluorescence titration. The method was adapted to the identification, study and characterization of mutant carbohydrate-binding modules with altered affinities and specificities. Competition affinity electrophoresis was used to monitor binding of small, soluble mono- and disaccharides to one of the modules.

Cellulose-binding domains promote hydrolysis of different sites on crystalline cellulose

The cohesin-dockerin interaction in Clostridium thermocellum cellulosome mediates the tight binding of cellulolytic enzymes to the cellulosome-integrating protein CipA. Here, this interaction was used to study the effect of different cellulose-binding domains (CBDs) on the enzymatic activity of C. thermocellum endoglucanase CelD (1,4-beta-d endoglucanase, EC) toward various cellulosic substrates. The seventh cohesin domain of CipA was fused to CBDs originating from the Trichoderma reesei cellobiohydrolases I and II (CBD(CBH1) and CBD(CBH2)) (1,4-beta-d glucan-cellobiohydrolase, EC), from the Cellulomonas fimi xylanase/exoglucanase Cex (CBD(Cex)) (beta-1,4-d glucanase, EC), and from C. thermocellum CipA (CBD(CipA)). The CBD-cohesin hybrids interacted with the dockerin domain of CelD, leading to the formation of CelD-CBD complexes. Each of the CBDs increased the fraction of cellulose accessible to hydrolysis by CelD in the order CBD(CBH1) < CBD(CBH2) approximately CBD(Cex) < CBD(CipA). In all cases, the extent of hydrolysis was limited by the disappearance of sites accessible to CelD. Addition of a batch of fresh cellulose after completion of the reaction resulted in a new burst of activity, proving the reversible binding of the intact complexes despite the apparent binding irreversibility of some CBDs. Furthermore, burst of activity also was observed upon adding new batches of CelD-CBD complexes that contained a CBD differing from the first one. This complementation between different CBDs suggests that the sites made available for hydrolysis by each of the CBDs are at least partially nonoverlapping. The only exception was CBD(CipA), whose sites appeared to overlap all of the other sites.

Secretion of the Caulobacter crescentus S-layer protein: further localization of the C-terminal secretion signal and its use for secretion of recombinant proteins

The secretion signal of the Caulobacter crescentus S-layer protein (RsaA) was localized to the C-terminal 82 amino acids of the molecule. Protein yield studies showed that 336 or 242 C-terminal residues of RsaA mediated secretion of >50 mg of a cellulase passenger protein per liter to the culture fluids.

The thermostabilizing domain of the modular xylanase XynA of Thermotoga maritima represents a novel type of binding domain with affinity for soluble xylan and mixed-linkage beta-1,3/beta-1, 4-glucan

Thermotoga maritima XynA is an extremely thermostable modular enzyme with five domains (A1-A2-B-C1-C2). Its catalytic domain (-B-) is flanked by duplicated non-catalytic domains. The C-terminal repeated domains represent cellulose-binding domains (CBDs). Xylanase domains related to the N-terminal domains of XynA (A1-A2) are called thermostabilizing domains because their deletion normally leads to increased thermosensitivity of the enzymes. It was found that a glutathione-S-transferase (GST) hybrid protein (GST-A1A2) containing both A-domains of XynA can interact with various soluble xylan preparations and with mixed-linkage beta-1,3/beta-1,4-glucans. GST-A1A2 showed no affinity for insoluble microcrystalline cellulose, whereas, vice versa, GST-C2, which contains the C-terminal CBD of XynA, did not interact with soluble xylan. Another hybrid protein, GST-A2, displayed the same binding properties as GST-A1A2, indicating that A2 alone can also promote xylan binding. The dissociation constants for the binding of xylose, xylobiose, xylotriose, xylotetraose and xylopentaose by GST-A2, as determined at 20 degrees C by fluorescence quench experiments, were 8.1 x 10(-3) M, 2.3 x 10(-4) M, 2.3 x 10(-5) M, 2.5 x 10(-6)M and 1.1 x 10(-6) M respectively. The A-domains of XynA, which are designated as xylan binding domains (XBD), are, from the structural as well as the functional point of view, prototypes of a novel class of binding domains. More than 50 related protein segments with hitherto unknown function were detected in about 30 other multidomain beta-glycanases, among them putative plant (Arabidopsis thaliana) xylanases. It is argued that polysaccharide binding and not thermostabilization is the main function of A-like domains.

Functional analysis of the carbohydrate-binding domains of Erwinia chrysanthemi Cel5 (Endoglucanase Z) and an Escherichia coli putative chitinase

The Cel5 cellulase (formerly known as endoglucanase Z) from Erwinia chrysanthemi is a multidomain enzyme consisting of a catalytic domain, a linker region, and a cellulose binding domain (CBD). A three-dimensional structure of the CBD(Cel5) has previously been obtained by nuclear magnetic resonance. In order to define the role of individual residues in cellulose binding, site-directed mutagenesis was performed. The role of three aromatic residues (Trp18, Trp43, and Tyr44) in cellulose binding was demonstrated. The exposed potential hydrogen bond donors, residues Gln22 and Glu27, appeared not to play a role in cellulose binding, whereas residue Asp17 was found to be important for the stability of Cel5. A deletion mutant lacking the residues Asp17 to Pro23 bound only weakly to cellulose. The sequence of CBD(Cel5) exhibits homology to a series of five repeating domains of a putative large protein, referred to as Yheb, from Escherichia coli. One of the repeating domains (Yheb1), consisting of 67 amino acids, was cloned from the E. coli chromosome and purified by metal chelating chromatography. While CBD(Cel5) bound to both cellulose and chitin, Yheb1 bound well to chitin, but only very poorly to cellulose. The Yheb protein contains a region that exhibits sequence homology with the catalytic domain of a chitinase, which is consistent with the hypothesis that the Yheb protein is a chitinase.

Characterization and affinity applications of cellulose-binding domains

Cellulose-binding domains (CBDs) are discrete protein modules found in a large number of carbohydrolases and a few nonhydrolytic proteins. To date, almost 200 sequences can be classified in 13 different families with distinctly different properties. CBDs vary in size from 4 to 20 kDa and occur at different positions within the polypeptides; N-terminal, C-terminal and internal. They have a moderately high and specific affinity for insoluble or soluble cellulosics with dissociation constants in the low micromolar range. Some CBDs bind irreversibly to cellulose and can be used for applications involving immobilization, others bind reversibly and are more useful for separations and purifications. Dependent on the CBD used, desorption from the matrix can be promoted under various different conditions including denaturants (urea, high pH), water, or specific competitive ligands (e.g. cellobiose). Family I and IV CBDs bind reversibly to cellulose in contrast to family II and III CBDs which are in general, irreversibly bound. The binding of family II CBDs (CBD(Cex)) to crystalline cellulose is characterized by a large favourable increase in entropy indicating that dehydration of the sorbent and the protein are the major driving forces for binding. In contrast, binding of family IV CBDs (CBD(N1)) to amorphous or soluble cellulosics is driven by a favourable change in enthalpy which is partially offset by an unfavourable entropy change. Hydrogen bond formation and van der Waals interactions are the main driving forces for binding. CBDs with affinity for crystalline cellulose are useful tags for classical column affinity chromatography. The affinity of CBD(N1) for soluble cellulosics makes it suitable for use in large-scale aqueous two-phase affinity partitioning systems.

Analysis of molecular size distributions of cellulose molecules during hydrolysis of cellulose by recombinant Cellulomonas fimi beta-1,4-glucanases

Four beta-1,4-glucanases (cellulases) of the cellulolytic bacterium Cellulomonas fimi were purified from Escherichia coli cells transformed with recombinant plasmids. Previous analyses using soluble substrates had suggested that CenA and CenC were endoglucanases while CbhA and CbhB resembled the exo-acting cellobiohydrolases produced by cellulolytic fungi. Analysis of molecular size distributions during cellulose hydrolysis by the individual enzymes confirmed these preliminary findings and provided further evidence that endoglucanase CenC has a more processive hydrolytic activity than CenA. The significant differences between the size distributions obtained during hydrolysis of bacterial microcrystalline cellulose and acid-swollen cellulose can be explained in terms of the accessibility of beta-1,4-glucan chains to enzyme attack. Endoglucanases and cellobiohydrolases were much more easily distinguished when the acid-swollen substrate was used.

Surface diffusion of cellulases and their isolated binding domains on cellulose

The surface diffusion rate of bacterial cellulases from Cellulomonas fimi on cellulose was quantified using fluorescence recovery after photobleaching analysis. Studies were performed on an exo-beta-1-4-glycanase (Cex), an endo-beta-1-4-glucanase (CenA), and their respective isolated cellulose-binding domains (CBDs). Although these cellulose-binding domains bind irreversibly to microcrystalline cellulose, greater than 70% of bound molecules are mobile on the cellulose surface. Surface diffusion rates are dependent on surface coverage and range from a low of 2 x 10(-11) to a maximum of 1.2 x 10(-10) cm2/s. The fraction of mobile molecules increases only slightly with increasing fractional surface coverage density. Results demonstrate that the packing of C. fimi cellulases and their isolated binding domains onto the cellulose surface is a dynamic process. This suggests that the exclusion of potential CBD binding sites on the cellulose due to steric effects of neighboring bound CBDs may not fully explain the apparent negative cooperativity exhibited in CBD adsorption isotherms. Comparison with the kinetics of cellulase hydrolysis of crystalline substrate suggests that surface diffusion rates do not limit cellulase activity.

Probing the role of tryptophan residues in a cellulose-binding domain by chemical modification

The cellulose-binding domain (CBDCex) of the mixed function glucanase-xylanase Cex from Cellulomonas fimi contains five tryptophans, two of which are located within the beta-barrel structure and three exposed on the surface (Xu GY et al., 1995, Biochemistry 34:6993-7009). Although all five tryptophans can be oxidized by N-bromosuccinimide (NBS), stopped-flow measurements show that three tryptophans react faster than the other two. NMR analysis during the titration of CBDCex with NBS shows that the tryptophans on the surface of the protein are fully oxidized before there is significant reaction with the two buried tryptophans. Additionally, modification of the exposed tryptophans does not affect the conformation of the backbone of CBDCex, whereas complete oxidation of all five tryptophans denatures the polypeptide. The modification of the equivalent of one and two tryptophans by NBS reduces binding of CBDCex to cellulose by 70% and 90%, respectively. This confirms the direct role of the exposed aromatic residues in the binding of CBDCex to cellulose. Although adsorption to cellulose does afford some protection against NBS, as evidenced by the increased quantity of NBS required to oxidize all of the tryptophan residues, the polypeptide can still be oxidized completely when adsorbed. This suggests that, whereas the binding appears to be irreversible overall [Ong E et al., 1989, Bio/Technology 7:604-607], each of the exposed tryptophans interacts reversibly with cellulose.

Microbial hydrolysis of polysaccharides

Microorganisms are efficient degraders of starch, chitin, and the polysaccharides in plant cell walls. Attempts to purify hydrolases led to the realization that a microorganism may produce a multiplicity of enzymes, referred to as a system, for the efficient utilization of a polysaccharide. In order to fully characterize a particular enzyme, it must be obtained free of the other components of a system. Quite often, this proves to be very difficult because of the complexity of a system. This realization led to the cloning of the genes encoding them as an approach to eliminating other components. More than 400 such genes have been cloned and sequenced, and the enzymes they encode have been grouped into more than 50 families of related amino acid sequences. The enzyme systems revealed in this manner are complex on two quite different levels. First, many of the individual enzymes are complex, as they are modular proteins comprising one or more catalytic domains linked to ancillary domains that often include one or more substrate-binding domains. Second, the systems are complex, comprising from a few to 20 or more enzymes, all of which hydrolyze a particular substrate. Systems for the hydrolysis of plant cell walls usually contain more components than systems for the hydrolysis of starch and chitin because the cell walls contain several polysaccharides. In general, the systems produced by different microorganisms for the hydrolysis of a particular polysaccharide comprise similar enzymes from the same families.

Characterization of a double cellulose-binding domain. Synergistic high affinity binding to crystalline cellulose

Most cellulose-degrading enzymes have a two-domain structure that consists of a catalytic and a cellulose-binding domain (CBD) connected by a linker region. The linkage and the interactions of the two domains represent one of the key questions for the understanding of the function of these enzymes. The CBDs of fungal cellulases are small peptides folding into a rigid, disulfide-stabilized structure that has a distinct cellulose binding face. Here we describe properties of a recombinant double CBD, constructed by fusing the CBDs of two Trichoderma reesei cellobiohydrolases via a linker peptide similar to the natural cellulase linkers. After expression in Escherichia coli, the protein was purified from the culture medium by reversed phase chromatography and the individual domains obtained by trypsin digestion. Binding of the double CBD and its single CBD components was investigated on different types of cellulose substrates as well as chitin. Under saturating conditions, nearly 20 micromol/g of the double CBD was bound onto microcrystalline cellulose. The double CBD exhibited much higher affinity on cellulose than either of the single CBDs, indicating an interplay between the two components. A two-step model is proposed to explain the binding behavior of the double CBD. A similar interplay between the domains in the native enzyme is suggested for its binding to cellulase.

Characterization of CenC, an enzyme from Cellulomonas fimi with both endo- and exoglucanase activities

The cenC gene, encoding beta-1,4-glucanase C (CenC) from Cellulomonas fimi, was overexpressed in Escherichia coli with a tac-based expression vector. The resulting polypeptide, with an apparent molecular mass of 130 kDa, was purified from the cell extracts by affinity chromatography on cellulose followed by anion-exchange chromatography. N-terminal sequence analysis showed the enzyme to be properly processed. Mature CenC was optimally active at pH 5.0 and 45 degrees C. The enzyme was extremely active on soluble, fluorophoric, and chromophoric glycosides (4-methylumbelliferyl beta-glycosides, 2'-chloro-4'-nitrophenyl-beta-D-cellobioside, and 2'-chloro-4'-nitrophenyl-lactoside) and efficiently hydrolyzed carboxymethyl cellulose, barley beta-glucan, lichenan, and, to a lesser extent, glucomannan. CenC also hydrolyzed acid-swollen cellulose, Avicel, and bacterial microcrystalline cellulose. However, degradation of the latter was slow compared with its degradation by CenB, another C. fimi cellulose belonging to the same enzyme family. CenC acted with inversion of configuration at the anomeric carbon, in accordance with its classification as a family 9 member. The enzyme released mainly cellobiose from soluble cellodextrins and insoluble cellulose. Attack appeared to be from the reducing chain ends. Analysis of carboxymethyl cellulose hydrolysis suggests that CenC is semiprocessive enzyme with both endo- and exoglucanase activities.