Electrochemical Sulfonylation/Cyclization of N-Alkenylacrylamides with Sodium Sulfinates or Sulfonyl Hydrazides

Two general protocols for the regioselective electrochemically enabled sulfonylation cyclization of N-alkenylacrylamides with sodium sulfinates or sulfonyl hydrazides were described. These methods were carried out under mild, chemical oxidant-free, and transition-metal-free conditions with a broad substrate scope and good functional group tolerance to provide sulfonyl-containing 4-pyrrolin-2-ones, which is readily scalable to the gram scale.

Green electrosynthesis of bis(indolyl)methane derivatives in deep eutectic solvents

In this study, a new green method was developed for the synthesis of bis(indolyl)methane derivatives using electrochemical bisarylation reaction in deep eutectic solvents as a green alternative to traditional solvents and electrolytes. The effects of varying time, current, type of solvent and material of electrodes were all studied. The optimum reaction conditions involved the use of ethylene glycol/choline chloride with a ratio of 2:1 at 80 °C for 45 min. Graphite and platinum were used as cathode and anode, respectively. The newly developed method offered many advantages such as using mild reaction conditions, short reaction time and affording high product yields with a wide range of substituted aromatic aldehydes bearing electron donating or electron withdrawing substituents. In addition, the electrochemical method proved to be more effective than heating in deep eutectic solvents and afforded higher yields of products in shorter reaction time. The mechanism of the electrochemical reaction was proposed and confirmed using the cyclic voltammetry study.

Oxidant-Free Electrochemical Direct Oxidative Benzyl Alcohols to Benzyl Aldehydes Using Three-Dimensional Printing PPAR Polyoxometalate

The oxidation of benzyl alcohols is an important reaction in organic synthesis. Traditional methods for benzyl alcohol oxidation have not been widely utilized due to the use of significant amounts of precious metals and environmentally unfriendly reagents. In recent years, electrocatalytic oxidation has gained significant attention, particularly electrochemical anodic oxidation, which offers a sustainable alternative for oxidation without the need for external oxidants or reducing agents. Here, a copper monosubstituted phosphotungstate-based polyacrylate resins (Cu-LPOMs@PPAR) catalyst has been fabricated with immobilization and recyclability using 3D printing technology that can be successfully applied in the electrocatalytic oxidation of benzyl alcohol to benzaldehyde, achieving atom economy and reducing pollution. In this protocol, we obtain benzaldehyde in good yields with excellent functional group toleration under metal-free and oxidant-free conditions. This strategy could provide a new avenue for heterogeneous catalysts in application for enhancing the efficiency and selectivity of electrocatalytic oxidation processes.

Electrochemical Difunctionalization of gem-Difluoroalkenes: A Metal-Free Synthesis of α-Difluoro(alkoxyl/azolated) Methylated Ethers

A scalable electrochemical difunctionalization of gem-difluoroalkenes to structurally versatile difluoro motifs was achieved. This methodology features reagent-free conditions, good functional group tolerance, and a relatively broad substrate scope. Meanwhile, the electrolysis protocol is easy to handle, and the products show good regio- and chemoselectivity. The reaction mechanism was also preliminarily studied.

Construction of β-Amino Sulfones from Sodium Metabisulfite via a Radical 1,4-Amino Migration

A three-component reaction of alkenyl-tethered oxime ethers, sodium metabisulfite, and aryldiazonium tetrafluoroborates under mild conditions is developed. This reaction proceeds at room temperature without any oxidants or additives, affording β-amino sulfones with good functional group tolerance through aminosulfonylation of unactivated alkene. Mechanistic studies show that this transformation undergoes a radical process, including radical trapping with sulfur dioxide and radical 1,4-amino migration.

Electrochemical synthesis of vicinal azidoacetamides

Vicinal diamines are an important structural motif in bioactive natural products and pharmaceutical intermediates. Herein, an environmentally friendly and efficient electrochemical approach to azidoacetamides, as one variant of vicinal diamines, has been developed. This reaction features mild conditions and broad substrate scope, without the use of any chemical oxidant or transition-metal catalysts. The obtained vicinal azidoacetamides could be conveniently converted into various other vicinal diamine derivatives.

Electroediting of Soft Polymer Backbones

Synthetic methods that edit soft polymer backbones are critical technologies for tailoring the structures and properties of macromolecules. Developing strategies that leverage underexplored reaction manifolds are vital for accessing new chemical (and functional) space in soft materials. Here, we report a mild electrochemical approach that enables both degradation and functionalization of synthetic polymers. We found that bulk electrolysis (under either homogeneous or heterogeneous conditions) promoted facile, chemoselective chain scission in a variety of olefin-containing materials. Polymer degradation could also be coupled with functionalization (e.g., azidation) to afford new species that could serve as macromonomers.

Progress in the Electrochemical Reactions of Sulfonyl Compounds

Electrosynthesis has recently attracted more and more attention due to its great potential to replace chemical oxidants or reductants in molecule-electrode electron transfer. Sulfonyl compounds such as sulfonyl hydrazides, sulfinic acids (and their salts), sulfonyl halides have been discovered as practical precursors of several radicals. As electrochemical redox reactions can provide green and efficient pathways for the activation of sulfonyl compounds, studies for electrosynthesis have rapidly increased. Several types of radicals can be generated from anodic oxidation or cathodic reduction of sulfonyl compounds and can initiate fluoroalkylation, benzenesulfonylation, cyclization or rearrangement. In this Review, we summarize the electrosynthesis developments involving sulfonyl compounds mainly in the last decade.

Insertion of ammonia into alkenes to build aromatic N-heterocycles

Ammonia is one of the most abundant and simple nitrogen sources with decent stability and reactivity. Direct insertion of ammonia into a carbon skeleton is an ideal approach to building valuable N-heterocycles for extensive applications with unprecedented atom and step economy. Here, we show an electrochemical dehydrogenative method in which ammonia is inserted directly into alkenes to build aromatic N-heterocycles in a single step without the use of any external oxidant. This new approach achieves 98–99.2% atom economy with hydrogen as the only byproduct. Quinoline and pyridine with diverse substitutions are readily available. In this work, electrochemistry was used to drive a 4-electron oxidation reaction that is hard to access by other protocols, providing a parallel pathway to nitrene chemistry. In a tandem transformation that included three distinct electrochemical processes, the insertion of ammonia further showcased the tremendous potential to manipulate heterocycles derived from Hantzsch ester to diazine via pyridine and pyrrole.

Aromatic heterocycles containing nitrogen are ubiquitous in biologically relevant small molecules. Here the authors show an unorthodox methodology for their synthesis, by inserting the nitrogen atom into a carbon ring, with ammonia in electrochemical conditions.

Exploring the regioselectivity of the cyanoalkylation of 3-aza-1,5-dienes: photoinduced synthesis of 3-cyanoalkyl-4-pyrrolin-2-ones

Regioselective cyanoalkylalkenylation of 3-aza-1,5-dienes with oxime esters induced by visible light.

An Electrochemical Way to Generate Amphiphiles from Hydrazones for the Synthesis of 1,2,4-Triazole Scaffold Cyclic Compounds

An electro-oxidative cyclization pathway in which hydrazones are selected as starting materials to generate amphiphiles by reacting with benzylamines and benzamides was reported. This strategy successfully prepared a series of 1,2,4-triazoles in satisfactory yields. Moreover, the use of cheap stainless steel as the anode, the feasibility to conduct the transformation as a one-pot reaction and the proof that scaling-up these reactions is possible make this transformation attractive for potential application in industry.

Atropoenantioselective Palladaelectro-Catalyzed Anilide C–H Olefinations Viable with Natural Sunlight as Sustainable Power Source

Enantioselective electrocatalyzed transformations represent a major challenge. We herein achieved atropoenantioselective pallada-electrocatalyzed C–H olefinations and C–H allylations with high efficacy and enantioselectivity under exceedingly mild reaction conditions. With (S)-5-oxoproline as the chiral ligand, activated and non-activated olefins were suitable substrates for the electro-C–H activations. Dual catalysis was devised in terms of electro-C–H olefination, along with catalytic hydrogenation. Challenging enantiomerically-enriched chiral anilide scaffolds were thereby obtained with high levels of enantio-control in the absence of toxic and cost-intensive silver salts. The resource-economy of the transformation was even improved by directly employing renewable solar energy.

Asymmetric pallada-electrocatalyzed C–H activation of achiral anilides were accomplished by catalyst control with high levels of enantioselectivity. Dual catalysis was devised, while photovoltaic cells could be used to empower the electrocatalysis.

An iron-catalyzed multicomponent reaction of cycloketone oxime esters, alkenes, DABCO·(SO2)2 and trimethylsilyl azide

The synthesis of β-azidosulfones starting from alkenes, cycloketone oxime esters, trimethylsilyl azide and a sulfur dioxide surrogate of DABCO·(SO2)2 under iron catalysis is developed.

PhB(OH)2-Promoted Electrochemical Sulfuration-Formyloxylation of Styrenes and Selectfluor-Mediated Oxidation-Olefination

We report a PhB(OH)₂-promoted electrochemical sulfuration-formyloxylation reaction of styrenes employing commercially available thiophenols/thiols as thiolating agents. Specifically, metal catalysts and external chemical oxidants are not needed in the reaction for the formation of β-formyloxy sulfides, and these sulfides can be further converted to (E)-vinyl sulfones via the Selectfluor-mediated oxidation-olefination. Notably, on the basis of this electrochemical oxidation strategy, β-hydroxy sulfide, β-formyloxy sulfoxide, β-formyloxy sulfone, and (E)-vinyl sulfoxide can also be easily prepared.

Electrochemical Tandem Olefination and Hydrogenation Reaction with Ammonia

An electrochemical Horner-Wadsworth-Emmons/hydrogenation tandem reaction was achieved using ammonia as electron and proton donors. The reaction could give two-carbon-elongated ester and nitrile from aldehyde or ketones directly. This reaction could proceed with a catalytic amount of base or even without a base. The ammonia provides both the electron and proton for this tandem reaction and enables the catalyst-free hydrogenation of an α,β-unsaturated HWE intermediate. More than 40 examples were reported, and functional groups, including heterocycles and hydroxyl, were tolerated.

Electrochemically Enabled Selenium Catalytic Synthesis of 2,1-Benzoxazoles from o-Nitrophenylacetylenes

The study reported an electrochemically mediated method for the preparation of 2,1-benzoxazoles from o-nitrophenylacetylenes. Different from the traditional electrochemical reduction of nitro to nitroso, the nitro group directly underwent a cyclization reaction with the alkyne activated by selenium cation generated by the anodic oxidation of diphenyl diselenide and finally produced the desired products.

Electrochemical Oxidative Carbon-Atom Difunctionalization: Towards Multisubstituted Imino Sulfide Ethers

Ethers (C-O/S) are ubiquitously found in a wide array of functional molecules and natural products. Nonetheless, the synthesis of imino sulfide ethers, containing an N(sp² )=C(sp² )-O/S fragment, still remains a challenge because of its sensitivity to acid. Developed here in is an unprecedented electrochemical oxidative carbon-atom difunctionalization of isocyanides, providing a series of novel multisubstituted imino sulfide ethers. Under metal-free and external oxidant-free conditions, isocyanides react smoothly with simple and readily available mercaptans and alcohols. Importantly, the procedure exhibited high stereoselectivities, excellent functional-group tolerance, and good efficiency on large-scale synthesis, as well as further derivatization of the products.

An electrochemical perspective on the roles of ligands in the merger of transition-metal catalysis and electrochemistry

A perspective on the roles of ligands in transition-metal catalysis under electrochemical conditions is provided.

Enantioselective Pallada-Electrocatalyzed C-H Activation by Transient Directing Groups: Expedient Access to Helicenes

Asymmetric pallada-electrocatalyzed C-H olefinations were achieved through the synergistic cooperation with transient directing groups. The electrochemical, atroposelective C-H activations were realized with high position-, diastereo-, and enantio-control under mild reaction conditions to obtain highly enantiomerically-enriched biaryls and fluorinated N-C axially chiral scaffolds. Our strategy provided expedient access to, among others, novel chiral BINOLs, dicarboxylic acids and helicenes of value to asymmetric catalysis. Mechanistic studies by experiments and computation provided key insights into the catalyst's mode of action.

Electrochemically Catalyzed Newman-Kwart Rearrangement: Mechanism, Structure-Reactivity Relationship, and Parallels to Photoredox Catalysis

The facilitation of redox-neutral reactions by electrochemical injection of holes and electrons, also known as "electrochemical catalysis", is a little explored approach that has the potential to expand the scope of electrosynthesis immensely. To systematically improve existing protocols and to pave the way toward new developments, a better understanding of the underlying principles is crucial. In this context, we have studied the Newman-Kwart rearrangement of O-arylthiocarbamates to the corresponding S-aryl derivatives, the key step in the synthesis of thiophenols from the corresponding phenols. This transformation is a particularly useful example because the conventional method requires temperatures up to 300 °C, whereas electrochemical catalysis facilitates the reaction at room temperature. A combined experimental-quantum chemical approach revealed several reaction channels and rendered an explanation for the relationship between the structure and reactivity. Furthermore, it is shown how rapid cyclic voltammetry measurements can serve as a tool to predict the feasibility for specific substrates. The study also revealed distinct parallels to photoredox-catalyzed reactions, in which back-electron transfer and chain propagation are competing pathways.

Recent progress in (hetero)arene cation radical-based heteroarene modification

The transformation of (hetero)arene cation radicals has become a powerful tool for the construction of highly functionalized (hetero)arenes. These (hetero)arene cation radicals could be generated under electrochemical, photochemical or chemical oxidation systems. The in situ generated (hetero)arene cation radicals can be attacked by various nucleophiles, such as (hetero)aromatics and anions, yielding structurally diverse molecules. Recently, a large number of impressive heteroarene modifications have been designed by this strategy. This review summarizes the advances in heteroarene modification via reactions of in situ formed (hetero)arene cation radicals, ranging from 2010 to 2020.

Heat- or light-induced acylarylation of unactivated alkenes towards 3-(α-acyl) indolines

A heat- or photoredox/iron dual catalysis-enabled rare example of radical acylation across unactivated alkenes with aldehydes.

Tailoring radicals by asymmetric electrochemical catalysis

We highlight asymmetric electrochemical catalysis as a powerful tool in facilitating radical transformations. The tunable features of electrochemical methods enable mild generations of radicals and provide control of chemo- and stereoselectivity.

Access to SCN-containing thiazolines via electrochemical regioselective thiocyanothiocyclization of N-allylthioamides

An electrochemical thiocyclization of N-allylthioamides has been developed for the synthesis of SCN-containing 2-thiazolines and NCS-containing thiazines.