Carbon Cloth‐based Hybrid Materials as Flexible Electrochemical Supercapacitors

Hybrid Materials: A Metareview

The field of hybrid materials has grown so wildly in the last 30 years that writing a comprehensive review has turned into an impossible mission. Yet, the need for a general view of the field remains, and it would be certainly useful to draw a scientific and technological map connecting the dots of the very different subfields of hybrid materials, a map which could relate the essential common characteristics of these fascinating materials while providing an overview of the very different combinations, synthetic approaches, and final applications formulated in this field, which has become a whole world. That is why we decided to write this metareview, that is, a review of reviews that could provide an eagle's eye view of a complex and varied landscape of materials which nevertheless share a common driving force: the power of hybridization.

Cobalt Oxide-Based Electrocatalysts with Bifunctionality for High-Performing Rechargeable Zinc-Air Batteries

In recent years, the rapid growth in renewable energy applications has created a significant demand for efficient energy storage solutions on a large scale. Among the various options, rechargeable zinc-air batteries (ZABs) have emerged as an appealing choice in green energy storage technology due to their higher energy density, sustainability, and cost-effectiveness. Regarding this fact, a spotlight is shaded on air electrode for constructing high-performance ZABs. Cobalt oxide-based electrocatalysts on the air electrode have gained significant attention due to their extraordinary features. Particularly, exploration and integration of bifunctional behavior for energy storage has remarkably promoted both ORR and OER to facilitate the overall performance of the battery. The plot of this review is forwarded towards in-depth analysis of the latest advancements in electrocatalysts that are based on cobalt oxide and possess bifunctional properties along with an introduction of the fundamental aspects of ZABs, Additionally, the topic entails an examination of the morphological variations and mechanistic details mentioning about the synthesis processes. Finally, a direction is provided for future research endeavors through addressing the challenges and prospects in the advancement of next-generation bifunctional electrocatalysts to empower high-performing ZABs with bifunctional cobalt oxide.

"Improving with using" effect and mechanism analysis of electrodeposited poly(1,5-diaminoanthraquinone)/carbon cloth electrode for high-performance flexible supercapacitors

As a robust and conductive substrate, carbon cloth (CC) has been modified with various pseudocapacitive materials to boost its electrochemical performance in flexible supercapacitors. Here, poly(1,5-diaminoanthraquinone) (PDAA) electrodeposited CC electrodes were developed and much higher areal specific capacitance was obtained in comparison with the functionalized CC (FCC). Most importantly, an unusual phenomenon of "improving with using" was found for the optimized one, FCC@PDAA-3, which exhibited the increased capacitance retention from 150.4% to 194.8% with increasing the number of cycles from 10,000 to 50,000. Such extraordinary cyclic life was mainly ascribed to the doping and electropolymerization of the encapsulated 1,5-diaminoanthraquinone (DAA) in the immobilized PDAA during the electrochemical cycles. These findings are expected to contribute to a deeper understanding of the pseudocapacitive materials evolution during long charging/discharging cycles, favoring the design of long-life supercapacitors for practical application.

Hierarchical NiCo@NiOOH@CoMoO4 Core-Shell Heterostructure on Carbon Cloth for High-Performance Asymmetric Supercapacitors

The fabrication of low-cost, effective, and highly integrated nanostructured materials through simple and reproducible methods for high-energy-density supercapacitors is highly desirable. Herein, an activated carbon cloth (ACC) is designed as the functional scaffold for supercapacitors and treated hydrothermally to deposit NiCo nanoneedles working as internal core, followed by a dip-dry coating of NiOOH nanoflakes core-shell and uniform hydrothermal deposition of CoMoO4 nanosheets serving as an external shell. The structured core-shell heterostructure ACC@NiCo@NiOOH@CoMoO4 electrode resulted in exceptional specific areal capacitance of 2920 mF cm-2 and exceptional cycling stability for 10 000 cycles. Moreover, the fabricated electrode is developed into an asymmetric supercapacitor which demonstrates excellent areal capacitance, energy density, and power density within the broad potential window of 1.7 V with a cycling life of 92.4% after 10 000 charge-discharge cycles, which reflects excellent cycle life. The distinctive core-shell structure, highly conductive substrate, and synergetic effect of coated material results in more electrochemical active sites and flanges for effective electrons and ion transportation. This unique technique provides a new perspective for cost-efficient supercapacitor applications.

Implementation of High-Capacity 3D Ti3C2TX MXene Supercapacitors with Terminal Group Modification

MXene is a highly latent capacity electrode material for supercapacitors, but its capacity limits its development. Herein, we have constructed an independently cross-linked three-dimensional (3D) Ti3C2TX MXene film (Zn-A-MXene) with a hydroxylation surface through a zinc ion (Zn2+) and NaOH. The alkalization of NaOH is used to replace the -F functional group that is not conducive to electrochemical reactions and cross-link the MXene nanosheets through the electrostatic interaction of zinc ions. The synergistic effect can greatly improve the effective area of the electrode, the accessibility of the electrolyte, and the specific capacitance. The 3D Zn-A-MXene films exhibit an extremely high capacity (465.1 F g-1 at 1 A g-1). The all-solid-state flexible supercapacitor assembled using a 3D Zn-A-MXene thin film also has a high energy density of 9.55 Wh kg at a power density of 603.16 W kg. After 5000 cycles, the flexible supercapacitor still has 81.25% of its initial capacity, demonstrating good cycling stability. This work furnishes the innovative idea for constructing high-capacity MXene flexible supercapacitors.

One-Step Electrodeposition of Polyaniline Nanorods on Carbon Cloth for High-Performance Flexible Supercapacitors

The electrochemical performance of the carbon cloth (CC)-based electrodes is determined by the kind, content, morphology, and size of the modified pseudocapacitive materials, as well as the interaction with CC. Also, such structural parameters were mainly dependent on the deposition condition. More uniform polyaniline (PANI) could be obtained by electrochemical polymerization in comparison to chemical oxidation polymerization. However, two steps of electrodeposition were usually needed for nucleation and growth. Here, based on the comprehensive optimization of the electrodeposition condition, well-defined PANI nanorods anchored on the functionalized carbon cloth (FCC) as flexible electrodes (FCC@PANI) were synthesized by a facile one-step electrochemical polymerization. Compared with the FCC electrode, the resultant FCC@PANI-4 sample possessed good cycling stability (98.3% capacitance retention after 10,000 cycles), higher specific capacitances of 2312 mF cm-2 (1.0 mA cm-2) and 107 F g-1 (1.0 A g-1) with the boosting ratio in the areal specific capacitance (CA), and mass specific capacitances (Cm) of 169 and 181%, respectively. The improvement in both specific capacitance and cycling stability was obtained by the strong interaction between the FCC and the modified PANI nanorods with enhanced utilization efficiency of electroactive materials. Furthermore, the symmetric solid-state device assembled using the FCC@PANI-4 electrode delivered a maximum energy density of 0.079 mWh cm-2 at a power density of 0.363 mW cm-2.

Engineering of nickel, cobalt oxides and nickel/cobalt binary oxides by electrodeposition and application as binder free electrodes in supercapacitors

Cobalt oxide, nickel oxide and cobalt/nickel binary oxides were synthesised by electrodeposition. To fine tune composition of CoNi alloys, growth parameters including voltage, electrolyte pH/concentration and deposition time were varied. These produced nanomaterials were used as binder free electrodes in supercapacitor cells and tested using three electrode setup in 2 MKOH aqueous electrolyte. Cyclic voltammetry and galvanostatic charge/discharge were used at different scan rates (5-100 mV/s) and current densities (1-10 A/g) respectively to investigate the capacitive behaviour and measure the capacitance of active material. Electrochemical impedance spectroscopy was used to analyse the resistive/conductive behaviours of these electrodes in frequency range of 100 kHz to 0.01 Hz at applied voltage of 10 mV. Binary oxide electrode displayed superior electrochemical performance with the specific capacitance of 176 F/g at current density of 1 A/g. This hybrid electrode also displayed capacitance retention of over 83% after 5000 charge/discharge cycles. Cell displayed low solution resistance of 0.35 Ω along with good conductivity. The proposed facile approach to synthesise binder free blended metal electrodes can result in enhanced redox activity of pseudocapacitive materials. Consequently, fine tuning of these materials by controlling the cobalt and nickel contents can assist in broadening their applications in electrochemical energy storage in general and in supercapacitors in particular.

Hydrothermal Synthesis of a Cellular NiO Film on Carbon Paper as a Promising Way to Obtain a Hierarchically Organized Electrode for a Flexible Supercapacitor

The formation of a cellular hierarchically organized NiO film on a carbon paper substrate under hydrothermal conditions using triethanolamine as a base has been studied. The thermal behavior of the carbon paper substrate with the applied semi-product shell was studied using synchronous thermal analysis (TGA/DSC) and it was demonstrated that such modification of the material surface leads to a noticeable increase in its thermal stability. Using scanning electron microscopy (SEM), it was shown that the NiO film grown on the carbon fiber surface is characterized by a complex cellular morphology, organized by partially layered individual nanosheets of about 4-5 nm thickness and lateral dimensions up to 1-2 μm, some edges and folds of which are located vertically relative to the carbon fiber surface. The surface of the obtained material was also examined using atomic force microscopy (AFM), and the electronic work function of the oxide shell surface was evaluated using the Kelvin probe force microscopy (KPFM) method. The electrochemical parameters of the obtained flexible NiO/CP electrode were analyzed: the dependence of the specific capacitance on the current density was determined and the stability of the material during cycling was studied, which showed that the proposed approach is promising for manufacturing hierarchically organized electrodes for flexible supercapacitors.

Recent Advances in Metal-Organic Frameworks (MOFs) and Their Composites for Non-Enzymatic Electrochemical Glucose Sensors

In recent years, with pressing needs such as diabetes management, the detection of glucose in various substrates has attracted unprecedented interest from researchers in academia and industry. As a relatively new glucose sensor, non-enzymatic target detection has the characteristics of high sensitivity, good stability and simple manufacturing process. However, it is urgent to explore novel materials with low cost, high stability and excellent performance to modify electrodes. Metal-organic frameworks (MOFs) and their composites have the advantages of large surface area, high porosity and high catalytic efficiency, which can be utilized as excellent materials for electrode modification of non-enzymatic electrochemical glucose sensors. However, MOFs and their composites still face various challenges and difficulties that limit their further commercialization. This review introduces the applications and the challenges of MOFs and their composites in non-enzymatic electrochemical glucose sensors. Finally, an outlook on the development of MOFs and their composites is also presented.

Flexible Supercapacitors Based on Stretchable Conducting Polymer Electrodes

Supercapacitors are widely used in various fields due to their high power density, fast charging and discharging speeds, and long service life. However, with the increasing demand for flexible electronics, integrated supercapacitors in devices are also facing more challenges, such as extensibility, bending stability, and operability. Despite many reports on stretchable supercapacitors, challenges still exist in their preparation process, which involves multiple steps. Therefore, we prepared stretchable conducting polymer electrodes by depositing thiophene and 3-methylthiophene on patterned 304 stainless steel (SS 304) through electropolymerization. The cycling stability of the prepared stretchable electrodes could be further improved by protecting them with poly(vinyl alcohol)/sulfuric acid (PVA/H₂SO₄) gel electrolyte. Specifically, the mechanical stability of the polythiophene (PTh) electrode was improved by 2.5%, and the stability of the poly(3-methylthiophene (P3MeT) electrode was improved by 7.0%. As a result, the assembled flexible supercapacitors maintained 93% of their stability even after 10,000 cycles of strain at 100%, which indicates potential applications in flexible electronics.

Electrochemical Sensing of H2O2 by Employing a Flexible Fe3O4/Graphene/Carbon Cloth as Working Electrode

We report the synthesis of Fe₃O₄/graphene (Fe₃O₄/Gr) nanocomposite for highly selective and highly sensitive peroxide sensor application. The nanocomposites were produced by a modified co-precipitation method. Further, structural, chemical, and morphological characterization of the Fe₃O₄/Gr was investigated by standard characterization techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and high-resolution TEM (HRTEM), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The average crystal size of Fe₃O₄ nanoparticles was calculated as 14.5 nm. Moreover, nanocomposite (Fe₃O₄/Gr) was employed to fabricate the flexible electrode using polymeric carbon fiber cloth or carbon cloth (pCFC or CC) as support. The electrochemical performance of as-fabricated Fe₃O₄/Gr/CC was evaluated toward H₂O₂ with excellent electrocatalytic activity. It was found that Fe₃O₄/Gr/CC-based electrodes show a good linear range, high sensitivity, and a low detection limit for H₂O₂ detection. The linear range for the optimized sensor was found to be in the range of 10-110 μM and limit of detection was calculated as 4.79 μM with a sensitivity of 0.037 µA μM^-1 cm^-2. The cost-effective materials used in this work as compared to noble metals provide satisfactory results. As well as showing high stability, the proposed biosensor is also highly reproducible.

Structural growth of zinc oxide nanograins on carbon cloth as flexible electrochemical platform for hydroxychloroquine detection

Pharmaceutical pollution that imposes a health threat worldwide is making accurate and rapid detection crucial to prevent adverse effects. Herein, binder-free zinc oxide nanograins on carbon cloth (ZnO NGs@CC) have been synthesized hydrothermally and employed to fabricate a flexible electrochemical sensor for the quantification of hydroxychloroquine (HCQ) that is typical pharmaceutical pollution. The characteristics of ZnO NGs@CC were investigated by various in-depth electron microscopic, spectroscopic and electroanalytical approaches. Compared with the pristine CC platform, the ZnO NGs@CC platform exhibits superior electrochemical performance in detecting HCQ with a large oxidation current at a low over-potential of +0.92 V with respect to the Ag/AgCl (Sat. KCl) reference electrode. With the support of desirable characteristics, the fabricated ZnO NGs@CC-based electrochemical sensor for HCQ detection displays good performances in terms of wide sensing range (0.5-116 μM), low detection limit (0.09 μM), high sensitivity (0.279 μA μM^-1 cm^-2), and strong selectivity. By the resulting 3D hierarchical nanoarchitecture, ZnO NGs@CC has progressive structural advantages that led to its excellent electrochemical performance in sensing applications. Furthermore, the electrochemical sensor is employed to detect HCQ in biological and environmental samples and also achieves good recovery rates. Thus, the designed ZnO NGs@CC demonstrates admirable electrochemical activity toward HCQ real-time monitoring and would be an excellent electrochemical platform for HCQ sensing.

A disposable and sensitive non-enzymatic glucose sensor based on a 3D-Mn-doped NiO nanoflower-modified flexible electrode

Herein, Mn-doped NiO nano-enzyme composites with high catalytic performance and excellent conductivity were grown on 3D CFC via hydrothermal and calcination methods to construct an efficient flexible glucose sensor.

Versatile Carbon Nanofiber-Based Sensors

Carbon nanofibers (CNFs) display colossal potential in different fields like energy, catalysis, biomedicine, sensing, and environmental science. CNFs have revealed extensive uses in various sensing platforms due to their distinctive structure, properties, function, and accessible surface functionalization capabilities. This review presents insight into various fabrication methods for CNFs like electrospinning, chemical vapor deposition, and template methods with merits and demerits of each technique. Also, we give a brief overview of CNF functionalization. Their unique physical and chemical properties make them promising candidates for the sensor applications. This review offers detailed discussion of sensing applications (strain sensor, biosensor, small molecule detection, food preservative detection, toxicity biomarker detection, and gas sensor). Various sensing applications of CNF like human motion monitoring and energy storage and conversion are discussed in brief. The challenges and obstacles associated with CNFs for futuristic applications are discussed. This review will be helpful for readers to understand the different fabrication methods and explore various applications of the versatile CNFs.

g-C3N4 nanosheets functionalized yttrium-doped ZrO2 nanoparticles for efficient photocatalytic Cr(VI) reduction and energy storage applications

Novel g-C₃N₄ functionalized yttrium-doped ZrO₂ hybrid heterostructured (g-YZr) nanoparticles have been synthesized to investigate photocatalytic Cr(VI) reduction as well as electrochemical energy storage applications. The nanoparticles have been characterized to examine their structural, optical, and photocatalytic properties. XRD confirmed the incorporation of dopant ions and heterostructure development between g-C₃N₄ and doped ZrO₂. When g-C₃N₄ was doped with ZrO_2, the ability of light adsorption was greatly enhanced due to the narrow band gap. The distinctive structure of g-YZr exhibited outstanding photocatalytic Cr(VI) reduction owing to its superior surface area, which greatly prevented the charge carriers' recombination rate and exhibited superior photocatalytic performance within 90 min of solar light irradiation. Furthermore, these catalysts demonstrated similar catalytic Cr(VI) reduction activity following four repeatability tests, indicating the exceptional structural stability of g-YZr catalysts. The electrochemical performance of the electrodes revealed that g-YZr exhibited superior specific capacitance over the other electrodes owing to extra energetic sites and robust synergic effect. Enhanced specific capacitance and long cyclic stability of the hybrid heterostructures displayed their usefulness for energy storage applications.

Novel g-C3N4/Cu-doped ZrO2 hybrid heterostructures for efficient photocatalytic Cr(VI) photoreduction and electrochemical energy storage applications

Pure ZrO₂, graphitic carbon nitride, Cu-doped ZrO₂ nanoparticles (Cu-Zr), and doped Cu-Zr nanoparticles decorated on the g-C₃N₄ surface (g-CuZr nanohybrids) were successfully prepared by a hydrothermal technique. Synthesized catalysts were examined by XRD, FE-SEM, TEM, UV-Vis spectroscopy, photoluminescence (PL), and BET surface measurements, respectively. The photocatalytic reduction of Cr(VI) photoreduction as well as energy storage supercapacitor applications were thoroughly investigated. The g-CuZr hybrid photocatalyst outperformed other pristine photocatalysts in terms of light absorption and catalytic Cr(VI) reduction performance under stimulated solar light irradiation. Furthermore, methylene blue (MB) was used as a photosensitizer to further improve the Cr(VI) photoreduction performance. In precise, the heterostructured hybrid catalyst exhibited improved photocatalytic Cr(VI) photoreduction activity (∼88.1%) in 5 mg/L MB solution over other catalysts. Moreover, the decoration of Cu-Zr on the surface of g-C₃N₄ enhanced the absorption ability of light and catalytic Cr(VI) photoreduction performance. The PL, EIS, and transient photocurrent analysis demonstrated that the efficiency of the charge carrier's separation in the nanohybrid catalyst was superior over other catalysts. Furthermore, heterostructured g-CuZr nanohybrid electrode exhibited superior specific capacitance (297.2 F/g) over other electrodes, which are 5.5 folds (54.01 F/g), ∼2 folds (144.01 F/g) better than pure ZrO₂ and g-C₃N₄ electrodes. Likewise, the nanohybrid electrode retained about 90% of the capacitive value after 2500 cycles over its initial capacitance.

Magneto-Electrodeposition of 3D Cross-Linked NiCo-LDH for Flexible High-Performance Supercapacitors

Layered double hydroxides (LDHs) with outstanding redox activity on flexible current collectors can serve as ideal cathode materials for flexible hybrid supercapacitors in wearable energy storage devices. Electrodeposition is a facile, time-saving, and economical technique to fabricate LDHs. The limited loading mass induced by insufficient mass transport and finite exposure of active sites, however, greatly hinders the improvement of areal capacity. Herein, magneto-electrodeposition (MED) under high magnetic fields up to 9 T is developed to fabricate NiCo-LDH on flexible carbon cloth (CC) as well as Ti₃ C₂ T_x functionalized CC. Owing to the magneto-hydrodynamic effect induced by magnetic-electric field coupling, the loading mass and exposure of active sites are significantly increased. Moreover, a 3D cross-linked nest-like microstructure is constructed. The MED-derived NiCo-LDH delivers an ultrahigh areal capacity of 3.12 C cm^-2 at 1 mA cm^-2 and as-fabricated flexible hybrid supercapacitors show an excellent energy density with an outstanding cycling stability. This work provides a novel route to improve electrochemical performances of layered materials through MED technique.

High performance flexible asymmetric supercapacitor constructed by cobalt aluminum layered double hydroxide @ nickel cobalt layered double hydroxide heterostructure grown in-situ on carbon cloth

HYPOTHESIS

Three-dimensional layered layered double hydroxide (LDH) nanostructure materials grow in-situ on excellent conductive and flexible carbon cloth (CC) substrate not only reduce the ability of binders in resisting ions transfer, but also make them to be quasi-vertically arranged well on substrates without aggregation. This would result in enough electroactive sites, to obtain superior electrochemical performance.

EXPERIMENTS

A hierarchical CoAl-LDH@NiCo-LDH composite was prepared on a surface-modified carbon cloth by a simple two-step hydrothermal process. In this process, CoAl-LDH nanosheets (NSs)/CC acting as the inner core were wrapped up in NiCo-LDH nanoneedle arrays (NNAs) evenly. Also, a flexible quasi-solid-state supercapacitor device was constructed using CoAl-LDH@NiCo-LDH/CC and activated carbon (AC) as a positive electrode and a negative electrode, respectively.

FINDINGS

The CoAl-LDH@NiCo-LDH/CC developed had an excellent specific capacitance (2633.6F/g at 1 A/g) with remarkable cyclic performance (92.5% retention of its incipient over 5000 cycles at 4 A/g). The flexible quasi-solid-state supercapacitor device CoAl-LDH@NiCo-LDH/CC//AC/CC yielded a splendid energy density of 57.8 Wh/kg at a power density of 0.81 kW/kg and a brilliant power density of 16.09 kW/kg at 38.0 Wh/kg in a broad potential window of 1.55 V. Furthermore, the exceptional cyclic stability and excellent flexibility of the device show it can be applied in flexible energy storage systems.

Voltammetric determination of pethidine in biofluids at a carbon cloth electrode modified by carbon selenide nanofilm

Developing a sensitive portable sensor for the screening of illicit drugs is always challenging. Due to the importance of pethidine (PTD) tracking in addiction diagnosis, many demands have recently increased for a selective and real-time sensor. Herein, a simple electrochemical sensor has been developed based on conductive carbon cloth (CC) modified with carbon selenide nanofilms (CSe₂NF) to provide a CSe₂NF/CC electrode as a novel PTD sensing tool. Profiting from the ingenious design of doping strategy during the synthesis process, Se was doped in the carbonaceous skeleton of the CC. Thus, the active surface area of the CSe₂NF (4.61 cm²) increased respect to the unmodified CC (0.094 cm²) to embed a suitable sensing interface in the fast PTD assay. By optimizing some effective experimental parameters such as pH, supporting electrolyte, Se powder amount, scan rate and accumulation time, the sensor catalyzed efficiently the oxidation reaction of PTD at 0.97 V. Based on peak current variations, the PTD was measured over a broad concentration range from 29 nM up to 181.8 μM with a limit of detection (LOD) as low as 19.3 nM compared to the other reported PTD sensors. The developed flexible sensor recognized the spiked PTD concentrations in some biofluids, including human blood, urine and saliva. The results of PTD analysis in the non-spiked and spiked blood, urine and saliva samples as the real samples by the developed sensor were validated by HPLC analysis as the reference method using t-test statistical method at confidence level of 5%. This sensing strategy based on the binder-free electrode could be promising for designing some sizable wearable sensors at a low cost. The high sensitivity of the sensor, which is a bonus for the rapid and on-site measurement of PTD, may open up a route for noninvasive routine analysis in clinical samples.

Stretchable Energy Storage Devices Based on Carbon Materials

Stretchable energy storage devices are essential for developing stretchable electronics and have thus attracted extensive attention in a variety of fields including wearable devices and bioelectronics. Carbon materials, e.g., carbon nanotube and graphene, are widely investigated as electrode materials for energy storage devices due to their large specific surface areas and combined remarkable electrical and electrochemical properties. They can also be effectively composited with many other functional materials or designed into different microstructures for fabricating stretchable energy storage devices. This review summarizes recent advances toward the development of carbon-material-based stretchable energy storage devices. An overview of common carbon materials' fundamental properties and general strategies to enable the stretchability of carbon-material-based electrodes are presented. The performances of the as-fabricated stretchable energy storage devices including supercapacitors, lithium-ion batteries, metal-air batteries, and other batteries are then carefully discussed. Challenges and perspectives in this emerging field are finally highlighted for future studies.

Preparation of Electrode Materials Based on Carbon Cloth via Hydrothermal Method and Their Application in Supercapacitors

Supercapacitors have the unique advantages of high power density, fast charge and discharge rates, long cycle life, high safety, and reliability, and are increasingly being used for applications including automobiles, rail transit, communication equipment, digital electronics, and aerospace equipment. The supercapacitor industry is currently in a stage of rapid development; great breakthroughs have also been made in improving the performance of supercapacitors and the expansion of their application. Electrode technology is the core of supercapacitors. Transition-metal compounds have a relatively high theoretical capacity and have received widespread attention as electrode materials for supercapacitors. In addition, there is a synergistic effect between the different components of various electrode composite materials. Due to their superior electrochemical performance, supercapacitors are receiving increasing research attention. Flexible supercapacitors have been hailed for their good plasticity, resulting in a development boom. This review article mainly outlines the development process of various electrode materials, including carbon materials, conductive polymers, metal compounds, and composite materials, as well as flexible electrode materials based on carbon cloth.

Enhanced Performance of Bioelectrodes Made with Amination-Modified Glucose Oxidase Immobilized on Carboxyl-Functionalized Ordered Mesoporous Carbon

This research reveals the improved performance of bioelectrodes made with amination-modified glucose oxidase (GOx-NH2) and carboxyl-functionalized mesoporous carbon (OMC-COOH). Results showed that when applied with 10 mM EDC amination, the functional groups of NH2 were successfully added to GOx, according to the analysis of 1H-NMR, elemental composition, and FTIR spectra. Moreover, after the aminated modification, increased enzyme immobilization (124.01 ± 1.49 mg GOx-NH2/g OMC-COOH; 2.77-fold increase) and enzyme activity (1.17-fold increase) were achieved, compared with those of non-modified GOx. Electrochemical analysis showed that aminated modification enhanced the peak current intensity of Nafion/GOx-NH2/OMC-COOH (1.32-fold increase), with increases in the charge transfer coefficient α (0.54), the apparent electron transfer rate constant ks (2.54 s-1), and the surface coverage Γ (2.91 × 10-9 mol·cm-2). Results showed that GOx-NH2/OMC-COOH exhibited impressive electro-activity and a favorable anodic reaction.

Identification and removal of micro- and nano-plastics: Efficient and cost-effective methods

Microplastics (MPs) and nanoplastics (NPs) have gained much attention in recent years because of their ubiquitous presence, which is the widely acknowledged threat to the environment. MPs can be <5 mm size, while NPs are <100 nm, and both can be detected in various forms and shapes in the environment to alleviate their harmful effects on aquatic species, soil organisms, birds, and humans. In efforts to address these issues, the present review discusses about sampling methods for water, sediments, and biota along with their merits and demerits. Various identification techniques such as FTIR, Raman, ToF-SIMS, MALDI TOF MS, and ICP-MS are critically discussed. The detrimental effects caused by MPs and NPs are discussed critically along with the efficient and cost-effective treatment processes including membrane technologies in order to remove plastics particles from various sources to mitigate their environmental pollution and risk assessment.

Electrochemical investigations for COVID-19 detection-A comparison with other viral detection methods

Virus-induced infection such as SARS-CoV-2 is a serious threat to human health and the economic setback of the world. Continued advances in the development of technologies are required before the viruses undergo mutation. The low concentration of viruses in environmental samples makes the detection extremely challenging; simple, accurate and rapid detection methods are in urgent need. Of all the analytical techniques, electrochemical methods have the established capabilities to address the issues. Particularly, the integration of nanotechnology would allow miniature devices to be made available at the point-of-care. This review outlines the capabilities of electrochemical methods in conjunction with nanotechnology for the detection of SARS-CoV-2. Future directions and challenges of the electrochemical biosensors for pathogen detection are covered including wearable and conformal biosensors, detection of plant pathogens, multiplexed detection, and reusable biosensors for on-site monitoring, thereby providing low-cost and disposable biosensors.

A strategy for preparing high-efficiency and economical catalytic electrodes toward overall water splitting

Electrolyzing water technology to prepare high-purity hydrogen is currently an important field in energy development. However, the preparation of efficient, stable, and inexpensive hydrogen production technology from electrolyzed water is a major problem in hydrogen energy production. The key technology for hydrogen production from water electrolysis is to prepare highly efficient catalytic, stable and durable electrodes, which are used to reduce the overpotential of the hydrogen evolution reaction and the oxygen evolution reaction of electrolyzed water. The main strategies for preparing catalytic electrodes include: (i) choosing cheap, large specific surface area and stable base materials, (ii) modulating the intrinsic activity of the catalytic material through elemental doping and lattice changes, and (iii) adjusting the morphology and structure to increase the catalytic activity. Based on these findings, herein, we review the recent work in the field of hydrogen production by water electrolysis, introduce the preparation of catalytic electrodes based on nickel foam, carbon cloth and new flexible materials, and summarize the catalytic performance of metal oxides, phosphides, sulfides and nitrides in the hydrogen evolution and oxygen evolution reactions. Secondly, parameters such as the overpotential, Tafel slope, active site, turnover frequency, and stability are used as indicators to measure the performance of catalytic electrode materials. Finally, taking the material cost of the catalytic electrode as a reference, the successful preparations are comprehensively compared. The overall aim is to shed some light on the exploration of high-efficiency and economical electrodes in energy chemistry and also demonstrate that there is still room for discovering new combinations of electrodes including base materials, composition lattice changes and morphologies.

Advanced Tri-Layer Carbon Matrices with π-π Stacking Interaction for Binder-Free Lithium-Ion Storage

Enabling materials with distinct features toward achieving high-performance energy storage devices is of huge importance but highly challenging. Commercial carbon cloth (CC), because of its appealing chemical and mechanical properties, has been proven to be an excellent conductive substrate for active electrode materials. However, its performance is notably poor when directly used as an electrode in energy storage, due to its low theoretical capacity and surface area. Herein, we successfully endow the CC with enhanced storage capacity via formation of a π-π stacking interaction by integrating electrochemically activated CC (denoted CC/ACC) with biomass-derived carbon (BMDC) (denoted π-CC/ECC@BMDC). The π-CC/ECC@BMDC electrode displays excellent storage performance with a high capacity of 2.53 mAh cm^-2 under 0.2 mA cm^-2 when used as anode material for lithium ion batteries (LIBs). Due to the induction energy, the negatively charged molecules of the CC/ACC functional groups interact with the BMDC during carbonization, creating the π-π stacking interaction. Based on first-principles calculations, the structural design of the tri-layer carbon enables the movement of electrons around the π-π stacking interaction, which significantly facilitates rapid transportation of electrons, creates three-dimensional (3D) ion tunnels for fast transportation of ions, and improves the electrode's mechanical and electronic properties.

Microplastics in the environment: Occurrence, perils, and eradication

Microplastics (MPs) with sizes < 5 mm are found in various compositions, shapes, morphologies, and textures that are the major sources of environmental pollution. The fraction of MPs in total weight of plastic accumulation around the world is predicted to be 13.2% by 2060. These micron-sized MPs are hazardous to marine species, birds, animals, soil creatures and humans due to their occurrence in air, water, soil, indoor dust and food items. The present review covers discussions on the damaging effects of MPs on the environment and their removal techniques including biodegradation, adsorption, catalytic, photocatalytic degradation, coagulation, filtration and electro-coagulation. The main techniques used to analyze the structural and surface changes such as cracks, holes and erosion post the degradation processes are FTIR and SEM analysis. In addition, reduction in plastic molecular weight by the microbes implies disintegration of MPs. Adsorptive removal by the magnetic adsorbent promises complete elimination while the biodegradable catalysts could remove 70-100% of MPs. Catalytic degradation via advanced oxidation assisted by S O 4 • - or O H • radicals generated by peroxymonosulfate or sodium sulfate are also adequately covered in addition to photocatalysis. The chemical methods such as sol-gel, agglomeration, and coagulation in conjunction with other physical methods are discussed concerning the drinking water/wastewater/sludge treatments. The efficacy, merits and demerits of the currently used removal approaches are reviewed that will be helpful in developing more sophisticated technologies for the complete mitigation of MPs from the environment.

Waste-to-energy nexus: A sustainable development

An upsurge in global population due to speedy urbanization and industrialization is facing significant challenges such as rising energy-demand, enormous waste-generation and environmental deterioration. The waste-to-energy nexus based on the 5R principle (Reduce, Reuse, Recycle, Recovery, and Restore) is of paramount importance in solving these Gordian knots. This review essentially concentrates on latest advancements in the field of 'simultaneous waste reduction and energy production' technologies. The waste-to-energy approaches (thermal and biochemical) for energy production from the agricultural residues are comprehensively discussed in terms environmental, techno-economic, and policy analysis. The review will assess the loopholes in order to come up with more sophisticated technologies that are not only eco-friendly and cost-effective, but also socially viable. The waste-to-energy nexus as a paradigm for sustainable development of restoring waste is critically discussed considering future advancement plans and agendas of the policy-makers.

Sustainable environmental management and related biofuel technologies

Environmental sustainability criteria and rising energy demands, exhaustion of conventional resources of energy followed by environmental degradation due to abrupt climate changes have shifted the attention of scientists to seek renewable sources of green and clean energy for sustainable development. Bioenergy is an excellent alternative since it can be applied for several energy-requirements after utilizing suitable conversion methodology. This review elucidates all aspects of biofuels (bioethanol, biodiesel, and butanol) and their sustainability criteria. The principal focus is on the latest developments in biofuel production chiefly stressing on the role of nanotechnology. A plethora of investigations regarding the emerging techniques for process improvement like integration methods, less energy-intensive distillation techniques, and bioengineering of microorganisms are discussed. This can assist in making biofuel-production in a real-world market more economically and environmentally viable.

Performance of chemically synthesized Mn3O4/rGO nanocomposite for electrochemical supercapacitor: a cost-effective high-performance electrode

The manganese oxide graphene oxide (Mn₃O₄/rGO) composite heterojunction with copper oxide is useful for the production of an electrochemical supercapacitor. The graphene oxide and manganese oxide composite have been synthesized by adopting a method of co-precipitation. The composite of Mn₃O₄/rGO was synthesized with different concentrations of Mn₃O₄ and rGO. The structural, morphological, electrochemical and supercapacitive properties of Mn₃O₄/rGO composite have been examined. The electrochemical and supercapacitive properties have been studied with regard to different substrates. The Mn₃O₄/rGO composite was deposited on different substrates such as steel, copper and brass. The CuO/Mn₃O₄/rGO shows relatively better specific capacitance (856 F g^-1) and better stability (82% retention after 2000 cycles) than other substrates used. The present work describes the development of cost-effective and high-performance CuO/Mn₃O₄/rGO-based nanomaterials for supercapacitors. The CuO/Mn₃O₄/rGO composite can be used as a flexible supercapacitor device.

Synthesis opto-electronic characterization and NLO evaluation of 6-methyl 5-nitro Uracil crystal using XRD, spectroscopic and theoretical tools

The organic composite crystal for 6-methyl 5-nitro Uracil was grown using slow-evaporation method and the crystal quality was checked by observing the peaks in XRD pattern. The molecular structure of 6-methyl 5-nitro Uracil was used to find crystal parameters for determining NLO activity. The appropriate electronic geometrical structure was keenly noted and the transitional energy exchange was studied and thereby fine-tuning of crystal performance was made by adopting suitable electron-accepting and with-drawing substitutional groups. The crystal parameters; a≠b≠c confirmed the orthorhombic lattice pattern. The space group was found as P21/a and Transparency range was observed as 409-1256 nm. The laser measurements were made and laser Damage threshold was estimated at 10 ns[1.08-3 GW/cm2]. The scattering characteristics of bond networks over the molecule were observed by studying vibrational characteristics of elemental bonds. The hybrid calculations on DFT methods were made using B3LYP/6-311++(D,P) basis set. The chemical shift was observed and retracing chemical potential was identified from the parametric oscillation. The frontier molecular interactions between ground and excited orbital lobe overlapping segments were noted and type of interaction system was identified. The electronic and protonic transfer energy was measured and the origination point of equivalent chemical potential was acknowledged. The NBMO profile was keenly grafted and the transitional energy was measured at every consumed electronic energy band. The vibrational circular dichroic image for all vibrational regions was sketched and the rate of transmission and absorption ratio was verified from peak intensity.

Study on the preparation and mechanism of chitosan-based nano-mesoporous carbons by hydrothermal method

In this paper, the hydrothermal method to synthesize and characterize nano-mesoporous carbons and their synthesis mechanism are reported. Using tri-block Pluronic F127 as a structuring agent and chitosan (CS) as a carbon source, the nano-mesoporous carbons were synthesized by a one-step sol polymerization and hydrothermal process, followed by carbonization at high temperature. The pore structure of the carbon materials was characterized by physical adsorption analyzer, and the morphology was characterized by SEM and TEM. Fourier-transform infrared, Raman and x-ray photoelectron spectroscopy were used to study the synthesis mechanism. The results showed that the self-assembly polymerization reaction between CS and F127 in a weakly acidic system was only implemented driven by the hydrogen bond auxiliary electrostatic interactions initiated by protonated amino groups. The nitrogen from amino groups and acetylamino groups, the oxygen in acetylamino groups, hydroxyl groups and the glycosidic bonds of CS, and the oxygen from the hydrophilic segments of F127 were the main active sites. The mesoporous material possesses a high Brunauer-Emmett-Teller surface area (163 m²/g) and large pore volume (0.462 cm³/g) with pore diameter around 2.1 nm. The nitrogen content was 1.08% and existed in the pore wall as the form of pyridine, pyrrole and quaternary nitrogen.

Ni and Zn co-substituted Co(CO3)0.5OH self-assembled flowers array for asymmetric supercapacitors

The supercapacitive performance of high-rate capacity and long-term cycling stability is still a big challenge for electroactive materials. Herein, Ni and Zn co-substituted Co carbonate hydroxide (NiZn-CoCH) flowers array is self-assembled on nickel foams (NFs) using l-ascorbic acid as a nanostructure inducer. The NiZn-CoCH flowers, consisting of silk-like nanosheets, are deservedly large electrode-electrolyte contact area and suitable ion-diffusion channel. The nanostructure and Ni and Zn co-substitution significantly improve energy storage performance. This electrode exhibits a high specific capacitance of 2020.8 F g^-1 at 1 A g^-1 with high-rate capacity (remain 80.2% at 10 A g^-1) and 5000-cycle stability (almost unchanged after 1500 cycles at 10 A g^-1). Additionally, an assembled asymmetric supercapacitor (ASC) device of NiZn-CoCH//activated carbon (AC) achieves a high energy density of 29.6 Wh kg^-1 at a power density of 375 W kg^-1 and only a 0.5% decrease of the capacitance after 2500 cycles. This facile and novel preparation method, using l-ascorbic acid, may be promising for industrial production of electroactive materials for the high-performance energy storage and conversion devices.

Waste-to-energy nexus for circular economy and environmental protection: Recent trends in hydrogen energy

The energy demand has increased exponentially worldwide owing to the continuously growing population and urbanization. The conventional fossil fuels are unable to satiate this requirement causing price inflation and significant environmental damage due to unrestrained emission of greenhouse gases. The focus now has shifted towards alternative, economical, renewable and green sources of energy such as hydrogen to deal with this bottle-neck. Hydrogen is a clean energy-source having high energy content (122 kJ/g). Recently, biological methods for the hydrogen production have attracted much attention because traditional methods are expensive, energy-exhaustive and not eco-friendly. The employment of biological methods promises utilization of waste or low-value materials for producing energy and building waste-to-energy nexus. Around 94% of the waste is discarded precariously in India and waste generation is growing at an alarming rate of 1.3% per year. The "waste-to-energy" techniques follow 'Reuse, Reduce, Recycle, Recovery and Reclamation' system solving three subjects at once; waste-management, energy-demand and environmental concern. Moreover, these methods have easy operability, cost-effectiveness and they help to shift from linear to circular model of economy for sustainable development. Biological processing of waste materials like agricultural discard (lignocellulosic biomass), food-waste and industrial discharge can be used for biohydrogen production. Dark and photo fermentation are the chief biological processes for the transformation of organic substrates to hydrogen. Dark fermentation is the acidogenic fermentation of carbohydrate-rich materials without light and oxygen. Clostridia, Enterobacter and Bacillus spp. are appropriate heterotrophic bacteria for dark fermentation. Various pretreatment methods like heat treatment, acid or base treatment, ultrasonication, aeration, electroporation, etc., can be applied on inoculums to increase H₂ producing bacteria eventually improving the hydrogen yield. However, only around 33% of COD in organic materials is transformed to H₂ by this method. Photofermentation by the photosynthetic non-sulfur bacteria (PNS) converts organic substrate to H₂ and CO₂ in the presence of nitrogenase enzyme in ammonium-limited and anoxygenic conditions. Rhodobacter or Rhodopseudomonas strains have been widely examined in this regard. But these methods are only able to produce H₂ with a poor yield. Combining dark and photofermentation is a noteworthy alternative for procuring enhanced hydrogen yields. Two-stage sequential method utilizes volatile fatty acids accumulated as byproducts after dark fermentation (in the first stage) for photofermentation by suitable bacteria (in the second stage). A proper investigation of the dark fermenter effluents is required before using them as a substrate for photo-fermentation. In a single-stage dark and photofermentation, co-culture of anaerobic and PNS bacteria in a single reactor is carried out for obtaining improved yield. The single stage system is comparatively inexpensive and less laborious; moreover, a limited requirement for an intermediate dilution stage is necessary. Economic analysis of hydrogen production showed that H₂ production by the present methods, save pyrolysis, is reasonably higher than the conventional approaches of fuel production. Probable routes to make H₂ production more cost-effective are reducing the cost of photobioreactor, installing proper storage system, etc. A constructive effort in the area of research and development of biological approaches of H₂ production technologies is vital. The commercial viability of biohydrogen production is imperative for accomplishment of circular economy system and sustainable development.