Assessment of the Electronic Properties of P ligands Stemming from Secondary Phosphine Oxides

Coordination chemistry of alkali metal dimesityl-thio- and dimesityl-selenophosphinites [(L)2A-EPMes2]2 (A = Li, Na, K; E = S, Se; L = THF, THP) and [(18C6)K-SPMes2]

The reactions of dimesitylphosphane oxide Mes2P(O)H with Lawessons reagent and dimesitylphoshane with selenium yield Mes2P(E)H with E = S (1a) and E = Se (1b), respectively, with moderate yields. Metalation of dimesitylphosphane sulfide 1a with n-butyllithium, sodium hydride or potassium hydride in THF allows the isolation of dinuclear dimesityl-thiophosphinites of the type [(thf)2A-S-PMes2]2 [A = Li (4), Na (5), K (2a)] with central four-membered A2S2 rings. The weaker base THP leads to the very similar aggregate [(thp)2K-S-PMes2]2 (3a) as has also been observed for the homologous potassium dimesityl-selenophosphinites of the type [(L)2K-Se-PMes2]2 [L = thf (2b), thp (3b)]. Addition of 18-crown-6 ether leads to deaggregation and expectedly to formation of mononuclear [(18C6)K-S-PMes2] (6). Moderate yields have been obtained due to dismutation reactions that yield the corresponding phosphinates AE2PMes2 and phosphanides APMes2, a degradation process which has been observed earlier also for Li-O-PMes2. This side reaction hampers the application of these thio- and selenophosphinites as catalysts in the addition of phosphane sulfides and selenides across alkynes.

B-P Coupling: Metal Stabilized Phosphinoborate Complexes

In an effort to establish B-P coupling reactions without the use of phosphine-borane dehydrocoupling agent, we have developed a new synthetic methodology employing group 8 metal σ-borate complex [{κ3 -H,S,S'-BH2 L2 }Ru{κ3 -H,H,S-BH3 L}] (L=NC5 H4 S), 1. Treatment of 1 with chlorodiphenyl phosphine (PPh2 Cl) yielded 1,5-P,S chelated Ru-dihydridoborate species [PPh2 H{κ3 -H,H,S-BH(OH)L}Ru{κ2 -P,S-(Ph2 P)BH2 L}], 2. The insertion of phosphine moiety (PPh2 ) by the cleavage of 3c-2e σ(Ru… H-B) bonding interaction led to the formation of B-P bond. The κ2 -P,S chelated six-membered ring adopted a boat conformation in complex 2. The heterocycle is made of all different atoms, which is one of the rarest examples of heteroatomic ring systems. Theoretical outcomes demonstrated the electronic insight of B-P coupling and stabilization through transition metal. In order to explore an alternate route of B-P bond formation, we have further explored the reaction of 1 and Ru-bis(dihydridoborate) complex, 5 with secondary phosphine oxide (SPO). Although, thermolysis of 1 with diphenylphosphine oxide yielded analogous σ-borate complex 3, the similar reaction of 5 at room temperature led to the formation of novel phosphinous(III) acid incorporated Ru(σ-borate)(dihydridoborate) complex, 6. In a similar fashion, the reaction of 5 with phosphite ligand generated Ru(σ-borate)(dihydridoborate) complex, 7, which is analogous to 6.

From Stable PH-Ylides to α-Carbanionic Phosphines as Ligands for Zwitterionic Catalysts

Although ylides are commonly used reagents in organic synthesis, the parent methylphosphine MePH2 only exists in its phosphine form in the condensed phase. Its ylide tautomer H3 P+ -CH2 - is considerably higher in energy. Here, we report on the formation of bis(sulfonyl)methyl-substituted phosphines of the type (RO2 S)2 C(H)-PR2, which form stable PH ylides under ambient conditions, amongst the first examples of an acyclic phosphine which only exists in its PH ylide form. Depending on the exact substitution pattern the phosphines form an equilibrium between the PH ylide and the phosphine form or exist as one of both extremes. These phosphines were found to be ideal starting systems for the facile formation of α-carbanionic phosphines. The carbanion-functionalization leads to a switch from electron-poor to highly electron-rich phosphines with strong donor abilities and high basicities. Thus, the phosphines readily react with different electrophiles exclusively at the phosphorus atom and not at the carbanionic center. Furthermore, the anionic nature of the phosphines allows the formation of zwitterionic complexes as demonstrated by the isolation of a gold(I) complex with a cationic metal center. The cationic gold center allows for catalytic activity in the hydroamination of alkyne without requiring a further activation step.

Bulky Di(1-adamantyl)phosphinous Acid-Ligated Pd(II) Precatalysts for Suzuki Reactions of Unreactive Aryl Chlorides

Di(1-adamantyl)phosphine oxide (SPO-Ad: Ad2P(V)(=O)H), a stable tautomer of di(1-adamantyl)phosphinous acid (PA-Ad: Ad2P(III)-OH), was employed to synthesize two new PA-Ad-coordinated complexes, POPd-Ad and POPd2-Ad. POPd-Ad was easily transformed from POPd2-Ad in acetonitrile, and the [M - H]- ion of the deprotonated POPd-Ad was observed in the electrospray ionization-mass spectrum of POPd2-Ad. Both complexes are effective precatalysts for the Suzuki reaction of aryl chlorides. The reduction of Pd(II) in POPd-Ad and POPd2-Ad by arylboronic acid was examined, and the ideal Pd-to-PA ratio in the Suzuki reaction was found to be 1:1. The effect of temperature on the catalytic yields was studied to examine the possible ligation state of the active species and the dimer-to-monomer process of POPd2-Ad. Mononuclear and mono-ligated Pd species was assumed to be catalytically active. The electronic and steric effects of PA-Ad were slightly better than those reported for PA-tBu ( t Bu2P(III)-OH). Density functional theory calculations were performed to evaluate the formation of mono-ligated and mononuclear Pd species from POPd-Ad and POPd2-Ad. Furthermore, the reaction time and catalyst loading could be reduced for the reported POPd1-tBu precatalyst using the optimized reaction conditions for POPd-Ad. The complexes synthesized in this extensive study will complement the existing SPO-coordinated POPd series of precatalysts.

Palladium Complexes Based on Ylide-Functionalized Phosphines (YPhos): Broadly Applicable High-Performance Precatalysts for the Amination of Aryl Halides at Room Temperature

Palladium allyl, cinnamyl, and indenyl complexes with the ylide-substituted phosphines Cy3 P+ -C- (R)PCy2 (with R=Me (L1) or Ph (L2)) and Cy3 P+ -C- (Me)PtBu2 (L3) were prepared and applied as defined precatalysts in C-N coupling reactions. The complexes are highly active in the amination of 4-chlorotoluene with a series of different amines. Higher yields were observed with the precatalysts in comparison to the in situ generated catalysts. Changes in the ligand structures allowed for improved selectivities by shutting down β-hydride elimination or diarylation reactions. Particularly, the complexes based on L2 (joYPhos) revealed to be universal precatalysts for various amines and aryl halides. Full conversions to the desired products are reached mostly within 1 h reaction time at room temperature, thus making L2 to one of the most efficient ligands in C-N coupling reactions. The applicability of the catalysts was demonstrated for aryl chlorides, bromides and iodides together with primary and secondary aryl and alkyl amines, including gram-scale applications also with low catalyst loadings of down to 0.05 mol %. Kinetic studies further demonstrated the outstanding activity of the precatalysts with TOF over 10.000 h-1 .

Group 9 and 10 Metal Complexes of an Ylide-Substituted Phosphine: Coordination versus Cyclometalation and Oxidative Addition

Ylide-substituted phosphines (YPhos) have been shown to be excellent ligands for several transition metal catalyzed reactions. Investigations of the coordination behavior of the YPhos ligand Y_SPPh₂ (1) [with Y_S = (Ph₃P)(SO₂Tol)C] toward group 9 and 10 metals revealed a surprisingly diverse coordination chemistry of the ligand. With Ni(CO)₄, the formation of a di- as well as tricarbonyl complex is observed depending on the reaction conditions. In [(κP,η²-benzene-1)Ni(CO)₂] the phosphine ligand also coordinates via a phosphonium bound phenyl group to the metal leading to a unique nickel η²-arene interaction, which can be viewed as an intermediate state toward P–C bond activation. Full cleavage of the P–C bond takes place with [Rh(COD)Cl]₂ leading to a complex salt with [(κP,κO-1)Rh(COD)]⁺ as cation and a dirhodium trichloride complex anion. Here, Y_SPPh₂ underwent P–C bond cleavage to thus act as an anionic diphosphine ligand. In contrast, in [(κP,κO-1)Rh(COD)]⁺ as well as [(κP,κO-1)Rh(CO)Cl], formed from the reaction of 1 with [Rh(CO)₂Cl]_2, the YPhos ligand acts as bidentate ligand complexing the metal via the phosphine and sulfonyl moiety with an intact PPh₃ unit. A further type of coordination is observed with [Ir(COD)Cl]₂. Here, phosphine coordination is accompanied by C–H activation at one of the phosphonium bound phenyl groups leading to a cyclometalated complex.

Group 9 and 10 metal complexes with the ylide-substituted phosphine Y_SPPh₂ (Y_S = PPh₃=C−SO₂Tol) were prepared. The ligand exhibits a surprisingly versatile coordination behavior: simple coordinations as mono- or bidentate ligand as well as P−C and C−H bond activations are observed depending on the used metal precursor.

A Highly Active Ylide-Functionalized Phosphine for Palladium-Catalyzed Aminations of Aryl Chlorides

Ylide-functionalized phosphine ligands (YPhos) were rationally designed to fit the requirements of Buchwald-Hartwig aminations at room temperature. This ligand class combines a strong electron-donating ability comparable to NHC ligands with high steric demand similar to biaryl phosphines. The active Pd species are stabilized by agostic C-H⋅⋅⋅Pd rather than by Pd-arene interactions. The practical advantage of YPhos ligands arises from their easy and scalable synthesis from widely available, inexpensive starting materials. Benchmark studies showed that YPhos-Pd complexes are superior to the best-known phosphine ligands in room-temperature aminations of aryl chlorides. The utility of the catalysts was demonstrated by the synthesis of various arylamines in high yields within short reaction times.

Coordination chemistry and catalysis with secondary phosphine oxides

Review on synthesis, coordination chemistry and catalysis with secondary phosphine oxides.

Mercapto-benzothiazolyl based ruthenium(ii) borate complexes: synthesis and reactivity towards various phosphines

Ruthenium complexes featuring phosphinate and dual Ru⋯H–B interactions between Ru and B–H bonds of borate ligands supported by mercapto-benzothiazolyl heterocycles have been synthesized.

Synthesis of chiral supramolecular bisphosphinite palladacycles through hydrogen transfer-promoted self-assembly process

P-Chiral secondary phosphine oxides react with Pd2(dba)3 in an acidic medium to provide chiral supramolecular bisphosphinite palladacycles through a H-transfer-based self-assembly process prior to SPO-promoted oxidative addition of an acid to a Pd(0) centre. The one-pot methodology allows variations of the X-type ligand as desired. Eight complexes have been characterised by X-ray diffraction.

Secondary Oxide Phosphines to Promote Tandem Acyl-Alkyl Coupling/Hydrogen Transfer to Afford (Hydroxyalkyl)rhodium Complexes. Theoretical and Experimental Studies

Acyl(σ-norbornenyl)rhodium(III) dimer [Rh(μ-Cl)(C₉H₆NCO)(C₇H₉)L]₂ (1) (C₇H₉ = σ-norbornenyl; L = 4-picoline, isoquinoline) reacts with diphenylphosphine oxide (SPO) to undergo a one-pot reaction involving (i) cleavage of the chloride bridges and coordination of the phosphine, (ii) C-C bond coupling between acyl and norbornenyl in a 18e species, and (iii) ligand-assisted outer-sphere O(P)-to-O(C) hydrogen transfer, to afford mononuclear 16e species [RhCl{(C₉H₆NC(O)C₇H₉)(Ph₂PO)H}(L)] (2) containing a quinolinyl-(norbornenylhydroxyalkyl) fragment hydrogen-bonded to a κ¹- P-phosphinite ligand. Pentacoordinated 2, which adopt a distorted trigonal bipyramidal structure, are kinetic reaction products that transform into the thermodynamic favored isomers 3. Structures 3 contain an unusual weak η¹-C anagostic interaction involving the rhodium atom and one carbon atom of the olefinic C-H bond of the norbornenyl substituent in the chelating quinolinyl-hydroxyalkyl moiety. Their structure can be described as pseudoctahedral, through a 5 + 1 coordination, with the anagostic interaction in a trans disposition with respect to the phosphorus atom of the phosphinite ligand. Complexes were characterized in solution by NMR spectroscopy and electrospray ionization mass spectrometry. Complex [RhCl{(C₉H₆NC(O)C₇H₉)(Ph₂PO)H}(4-picoline)] (3a) was also identified by X-ray diffraction. Density functional theory calculations confirm the proposed structures by a plausible set of mechanisms that accounts for the 1 (monomer) → 2 → 3 transformation. Lowest-energy pathways involve reductive elimination of quinolinylnorbornenylketone, still coordinated in the rhodium(I) species thus formed, followed by O-to-O hydrogen transfer from κ¹- P-SPO to the sp³ hybridized carbonyl group (formal alkoxide) avoiding the otherwise expected classical release of ketone. Theoretical ¹³C NMR studies also confirm the experimental spectral data for the considered structures.

An electron poor iridium pincer complex for catalytic alkane dehydrogenation

A novel electron deficient 4,6-bis(trifluoromethyl)-1,3-phenylene diphosphinite ligand 4 was developed and synthesized. Reaction of Ir precursors with ligand 4 gave chloro(hydride) pincer complex 5, which demonstrated a higher TON in alkane dehydrogenation reactions compared to similar phosphinite based pre-catalysts. The formation of cyclooctene (COE) and tert-butylethylene adducts of the 14e catalysts was also studied and the COE adduct is implicated as the resting state of the catalyst. All compounds were characterized by NMR spectroscopy and, in addition, the molecular structures of key complexes were confirmed by X-ray analysis.

Development of a novel secondary phosphine oxide–ruthenium(ii) catalyst and its application for carbonyl reduction

A secondary phosphine oxide–phosphine mixed tridentate ligand and its ruthenium complex have been developed.

Synthesis and coordination chemistry of enantiopure t-BuMeP(O)H

Enantioselective synthesis of t-BuMeP(O)H and its coordination chemistry towards several transition metals are described, showing a variety of coordination modes.

An iridium–SPO complex as bifunctional catalyst for the highly selective hydrogenation of aldehydes

An Ir(iii) hydride catalytic system shows very high activities and selectivities in the chemoselective hydrogenation of various substituted aldehydes.

Characterization of secondary phosphine oxide ligands on the surface of iridium nanoparticles

The coordination mode of secondary phosphine oxide ligands on the surface of iridium nanoparticle catalysts was elucidated by solid-state NMR.

Phosphinito palladium(ii) complexes as catalysts for the synthesis of 1,3-enynes, aromatic alkynes and ynones

An air-stable phosphinito palladium(ii) complex has been found to be an efficient catalyst in the formation of C–C bonds.

Enantioselective hydrogenation of ketones by iridium nanoparticles ligated with chiral secondary phosphine oxides

Chiral iridium nanoparticles (IrNPs) were synthesized by H₂reduction of (1,5-cyclooctadiene)(methoxy)iridium(i) dimer ([Ir(OMe)(COD)]₂) in the presence of an asymmetric secondary phosphine oxide.

[RuCl2(η6-p-cymene)] complexes bearing phosphinous acid ligands: preparation, application in C–H bond functionalization and mechanistic investigations

A series of [RuCl₂(η⁶-p-cymene)] complexes bearing phosphinous acid (PA) ligands have been straightforwardly prepared from the dimer [RuCl₂(p-cymene)]₂ and secondary phosphine oxides (SPOs) and fully characterized.

Efficient nickel-catalyzed phosphinylation of C–S bonds forming C–P bonds

The first nickel-catalyzed phosphinylation of C–S bonds forming C–P bonds is developed. The reaction can proceed readily with the simple Ni(cod)₂ at a loading down to 0.1 mol% at the 10 mmol scale. Various aryl sulfur compounds, i.e. sulfides, sulfoxides and sulfones all couple with P(O)–H compounds to produce the corresponding organophosphorus compounds, which provides an efficient new method for the construction of C–P bonds.

A diphenyl ether derived bidentate secondary phosphine oxide as a preligand for nickel-catalyzed C–S cross-coupling reactions

A bidentate secondary phosphine oxide is a more effective preligand than Ph₂P(O)H in nickel-catalyzed C–S cross-coupling reactions.