Direct α-Functionalization of Saturated Cyclic Amines

Site-selective α-C(sp3)-H arylation of dialkylamines via hydrogen atom transfer catalysis-enabled radical aryl migration

Site-selective C(sp3)-H arylation is an appealing strategy to synthesize complex arene structures but remains a challenge facing synthetic chemists. Here we report the use of photoredox-mediated hydrogen atom transfer (HAT) catalysis to accomplish the site-selective α-C(sp3)-H arylation of dialkylamine-derived ureas through 1,4-radical aryl migration, by which a wide array of benzylamine motifs can be incorporated to the medicinally relevant systems in the late-stage installation steps. In contrast to previous efforts, this C-H arylation protocol exhibits specific site-selectivity, proforming predominantly on sterically more-hindered secondary and tertiary α-amino carbon centers, while the C-H functionalization of sterically less-hindered N-methyl group can be effectively circumvented in most cases. Moreover, a diverse range of multi-substituted piperidine derivatives can be obtained with excellent diastereoselectivity. Mechanistic and computational studies demonstrate that the rate-determining step for methylene C-H arylation is the initial H atom abstraction, whereas the radical ipso cyclization step bears the highest energy barrier for N-methyl functionalization. The relatively lower activation free energies for secondary and tertiary α-amino C-H arylation compared with the functionalization of methylic C-H bond lead to the exceptional site-selectivity.

Regioselective α-Phosphonylation of Unprotected Alicyclic Amines

Unprotected alicyclic amines undergo α-C-H bond phosphonylation via a two-stage one-pot process involving the oxidation of amine-derived lithium amides with simple ketone oxidants, generating transient imines which are then captured with phosphites or phosphine oxides. Amines with an existing α-substituent undergo regioselective α'-phosphonylation. Amine α-arylation and α'-phosphonylation can be combined, generating a difunctionalized product in a single operation.

One-pot C(sp3)-H difluoroalkylation of tetrahydroisoquinolines and isochromans via electrochemical oxidation and organozinc alkylation

The C(sp3)-H difluoroalkylation for the introduction of carbonylated CF2 groups into tetrahydroisoquinolines (THIQs) and isochromans has been achieved by using electrochemical oxidation and organozinc alkylation. This one-pot process proceeded smoothly under transition-metal catalyst- and chemical oxidant-free conditions, and the desired products were obtained in good to high yields with a broad scope, except for N-Boc-THIQ. In addition, the gram-scale experiment successfully demonstrated the promising scalability. This is the first example of an electrochemical method for C(sp3)-H difluoroalkylation of amines and ethers.

Copper-Nitroxyl-Catalyzed α-Oxygenation of Cyclic Secondary Amines Including Application to Late-Stage Functionalization

Cyclic secondary amines are prominent subunits in pharmaceutical compounds. Methods for direct functionalization of N-unprotected/unsubstituted piperidines and related heterocycles have limited precedent despite their potential to impact medicinal chemistry and organic synthesis. Herein, we report a Cu/nitroxyl co-catalyzed method for direct conversion of cyclic secondary amines to the corresponding lactams via aerobic dehydrogenation and oxidative coupling with water. The mild reaction conditions tolerate diverse functional groups, enabling application to molecules that cover broad chemical space. The method is showcased in selective functionalization of building blocks and complex molecules, including late-stage functionalization of bromodomain inhibitors.

One-pot C-N/C-C bond formation and oxidation of donor-acceptor cyclopropanes with tetrahydroisoquinolines: access to benzo-fused indolizines

One-pot C-N/C-C bond formation of donor-acceptor cyclopropanes (DACs) with tetrahydroisoquinolines (THIQs) has been achieved to furnish benzo-fused indolizines. These reactions involve a MgI2-catalyzed ring opening of DACs and oxidative annulation using Mn(OAc)3·2H2O. The substrate scope and functional group diversity are the important practical features.

Mechanistic Investigation, Wavelength-Dependent Reactivity, and Expanded Reactivity of N-Aryl Azacycle Photomediated Ring Contractions

Under mild blue-light irradiation, α-acylated saturated heterocycles undergo a photomediated one-atom ring contraction that extrudes a heteroatom from the cyclic core. However, for nitrogenous heterocycles, this powerful skeletal edit has been limited to substrates bearing electron-withdrawing substituents on nitrogen. Moreover, the mechanism and wavelength-dependent efficiency of this transformation have remained unclear. In this work, we increased the electron richness of nitrogen in saturated azacycles to improve light absorption and strengthen critical intramolecular hydrogen bonding while enabling the direct installation of the photoreactive handle. As a result, a broadly expanded substrate scope, including underexplored electron-rich substrates and previously unsuccessful heterocycles, has now been achieved. The significantly improved yields and diastereoselectivities have facilitated reaction rate, kinetic isotope effect (KIE), and quenching studies, in addition to the determination of quantum yields. Guided by these studies, we propose a revised ET/PT mechanism for the ring contraction, which is additionally corroborated by computational characterization of the lowest-energy excited states of α-acylated substrates through time-dependent DFT. The efficiency of the ring contraction at wavelengths longer than those strongly absorbed by the substrates was investigated through wavelength-dependent rate measurements, which revealed a red shift of the photochemical action plot relative to substrate absorbance. The elucidated mechanistic and photophysical details effectively rationalize empirical observations, including additive effects, that were previously poorly understood. Our findings not only demonstrate enhanced synthetic utility of the photomediated ring contraction and shed light on mechanistic details but may also offer valuable guidance for understanding wavelength-dependent reactivity for related photochemical systems.

Cyclometalated Ruthenium Catalyst Enables Selective Oxidation of N-Substituted Tetrahydroquinolines to Lactams

Herein, we report an unusual α-methylene oxidation of N-substituted tetrahydroquinoline to lactams using the cyclometalated Ru(II)-complex as a catalyst. Cyclic-α-methylene C-H bonds are selectively oxidized under the reaction conditions even in the presence of α-methyl or reactive α-methylene C-H bonds. This methodology is also useful in the late-stage functionalization of pharmaceuticals. Mechanistic study demonstrates that the high-valent Ru(VI)-cis-dioxo species plays an important role in controlling selectivity.

Multienzymatic Cascades and Nanomaterial Scaffolding-A Potential Way Forward for the Efficient Biosynthesis of Novel Chemical Products

Synthetic biology is touted as the next industrial revolution as it promises access to greener biocatalytic syntheses to replace many industrial organic chemistries. Here, it is shown to what synthetic biology can offer in the form of multienzyme cascades for the synthesis of the most basic of new materials-chemicals, including especially designer chemical products and their analogs. Since achieving this is predicated on dramatically expanding the chemical space that enzymes access, such chemistry will probably be undertaken in cell-free or minimalist formats to overcome the inherent toxicity of non-natural substrates to living cells. Laying out relevant aspects that need to be considered in the design of multi-enzymatic cascades for these purposes is begun. Representative multienzymatic cascades are critically reviewed, which have been specifically developed for the synthesis of compounds that have either been made only by traditional organic synthesis along with those cascades utilized for novel compound syntheses. Lastly, an overview of strategies that look toward exploiting bio/nanomaterials for accessing channeling and other nanoscale materials phenomena in vitro to direct novel enzymatic biosynthesis and improve catalytic efficiency is provided. Finally, a perspective on what is needed for this field to develop in the short and long term is presented.

Asymmetric α-C(sp3)-H allylic alkylation of primary alkylamines by synergistic Ir/ketone catalysis

Primary alkyl amines are highly reactive in N-nucleophilic reactions with electrophiles. However, their α-C-H bonds are unreactive towards electrophiles due to their extremely low acidity (pKa ~57). Nonetheless, 1,8-diazafluoren-9-one (DFO) can activate primary alkyl amines by increasing the acidity of the α-amino C-H bonds by up to 1044 times. This makes the α-amino C-H bonds acidic enough to be deprotonated under mild conditions. By combining DFO with an iridium catalyst, direct asymmetric α-C-H alkylation of NH2-unprotected primary alkyl amines with allylic carbonates has been achieved. This reaction produces a wide range of chiral homoallylic amines with high enantiopurities. The approach has successfully switched the reactivity between primary alkyl amines and allylic carbonates from intrinsic allylic amination to the α-C-H alkylation, enabling the construction of pharmaceutically significant chiral homoallylic amines from readily available primary alkyl amines in a single step.

Alicyclic-Amine-Derived Imine-BF3 Complexes: Easy-to-Make Building Blocks for the Synthesis of Valuable α-Functionalized Azacycles

A new strategy to access α-functionalized alicyclic amines via their corresponding imine-BF3 complexes is reported. Isolable imine-BF3 complexes, readily prepared via dehydrohalogenation of N-bromoamines in a base-promoted/18-crown-6 catalyzed process followed by addition of boron trifluoride etherate, undergo reactions with a wide range of organometallic nucleophiles to afford α-functionalized azacycles. Organozinc and organomagnesium nucleophiles add at ambient temperatures, obviating the need for cryogenic conditions. In situ preparation of imine-BF3 complexes provides access to α-functionalized morpholines and piperazines directly from their parent amines in a single operation. α-Functionalized morpholines can be elaborated further, for instance by installing a second substituent in the α'-position.

β-C-H Allylation of Trialkylamines with Allenes Promoted by Synergistic Borane/Palladium Catalysis

Functionalization of the C(sp3 )-H bonds of trialkylamines is challenging, especially for reactions at positions other than the α position. Herein, we report a method for β-C(sp3 )-H allylation of trialkylamines. In these reactions, which involve synergistic borane/palladium catalysis, an enamine intermediate is first generated from the amine via α,β-dehydrogenation promoted by B(C6 F5 )3 and a base, and then the enamine undergoes palladium-catalyzed reaction with an allene to give the allylation product. Because the hydride and the proton resulting from the initial dehydrogenation are ultimately shuttled to the product by B(C6 F5 )3 and the palladium catalyst, respectively, these reactions show excellent atom economy. The establishment of this method paves the way for future studies of C-H functionalization of trialkylamines by means of synergistic borane/transition-metal catalysis.

Photoinduced α-Aminoalkylation of Sulfonylarenes with Alkylamines

α-Aminoalkylation of sulfonylarenes with alkylamines was found to be induced by photoirradiation. Here various types of alkylamines, such as trialkylamines, dialkylamines, N,N-dialkylanilines and N-alkylanilines as well as sulfonylarenes containing an azole, azine, heterole or benzene ring are available. The reaction proceeds through a homolytic aromatic substitution (HAS) process consisting of addition of an α-aminoalkyl radical to a sulfonylarene and elimination of the sulfonyl radical to give the α-arylalkylamine, where photoirradiation is considered to induce homolysis of sulfonylarenes leading to the generation of α-aminoalkyl radicals that make a radical chain operative.

Synthesis of dienes from pyrrolidines using skeletal modification

Saturated N-heterocyclic pyrrolidines are common in natural products, medicinal compounds and agrochemicals. However, reconstruction of their skeletal structures creating new chemical space is a challenging task, and limited methods exist for this purpose. In this study, we report a skeletal modification strategy for conversion of polar cyclic pyrrolidines into nonpolar linear dienes through a N-atom removal and deconstruction process. This involves N-sulfonylazidonation followed by rearrangement of the resulting sulfamoyl azide intermediates. This can be an energetically unfavorable process, which involves the formation of active C-C π bonds, the consumption of inert C-N and C-C σ bonds and the destruction of stable five-membered rings, but we have used it here to produce versatile conjugated and nonconjugated dienes with links of varying lengths. We also studied the application of this method in late-stage skeletal modification of bioactive compounds, formal traceless C(sp2)-H functionalization and formal N-atom deletion.

Organic photoredox catalyzed C(sp3)-H functionalization of saturated aza-heterocycles via a cross-dehydrogenative coupling reaction

Herein we present a novel protocol to access α-functionalized saturated aza-heterocycles, and a variety of nucleophilic groups, such as indole, naphthol, phenol, pyrrole, furyl, nitromethyl, and cyano, could be easily installed into saturated aza-heterocycles. Furthermore, a range of biologically valuable 3,3'-diindolylmethane derivatives could also be readily accessed under mild photocatalytic conditions.

Synthesis of Polycyclic Imidazoles via α-C-H/N-H Annulation of Alicyclic Amines

Secondary alicyclic amines are converted to their corresponding ring-fused imidazoles in a simple procedure consisting of oxidative imine formation followed by a van Leusen reaction. Amines with an existing α-substituent undergo regioselective ring-fusion at the α'-position. This method was utilized in a synthesis of fadrozole.

B(C6F5)3-catalyzed β-C(sp3)-H alkylation of tertiary amines with 2-aryl-3H-indol-3-ones

The β-C-H functionalization of amines is one of the most powerful tools for the synthesis of saturated nitrogen-containing heterocycles in organic synthesis. However, the β-C-H functionalization of amines via redox-neutral addition with cyclic-ketimines is still unprecedented. Herein, the β-C-H functionalization of tertiary amines is described, providing the corresponding 1,3-diamines containing the indolin-3-one moiety in high yields via the B(C₆F₅)₃-catalyzed borrowing hydrogen strategy. According to the experimental results, a possible catalytic cycle has been proposed to rationalize the process of this reaction. Notably, the β-C-H alkylation of amines is external oxidant- and transition-metal-free, which makes a significant contribution to promoting economical chemical synthesis.

Chemoselective and diastereoselective construction of 4-alkylidene-tetrahydroquinoline via a redox-neutral vinylogous cascade [1,7]-hydride transfer/6-endo-trig cyclization strategy

Herein, we disclose a chemoselective and diastereoselective synthesis of the medicinally significant 4-alkylidene-tetrahydroquinoline via a redox-neutral vinylogous cascade condensation/[1,7]-hydride transfer/6-endo-trig cyclization strategy, which features a novel product skeleton, high chemoselectivity and diastereoselectivity, facile introduction of 4-alkylidenyl motifs, employment of α,β,γ,δ-unsaturated dicyanoalkenes as novel hydride acceptors, and green and metal-free conditions with water as the only by-product. Additionally, the versatility of α,α-dicyanoalkenes has been fully exploited as hydride acceptors and γ-exclusive nucleophiles consecutively for accessing novel heterocyclic skeletons.

Transannular Functionalization of Multiple C(sp3)-H Bonds of Tropane via an Alkene-Bridged Palladium(I) Dimer

This communication describes the Pd-catalyzed C(sp3)-H functionalization of a tropane derivative to generate products with functionalization at two (β/γ) or three (β/γ/β) different sites on the alicyclic amine core. These reactions proceed via an initial dehydrogenation to generate an alkene product that can react further to form a Pd(I) alkene-bridged dimer. Functionalization of this dimer affords β/γ/β-functionalized allylic arylation and allylic acetoxylation products.

Recent Advances in Synthetic Routes to Azacycles

A heterocycle is an important structural scaffold of many organic compounds found in pharmaceuticals, materials, agrochemicals, and biological processes. Azacycles are one of the most common motifs of a heterocycle and have a variety of applications, including in pharmaceuticals. Therefore, azacycles have received significant attention from scientists and a variety of methods of synthesizing azacycles have been developed because their efficient synthesis plays a vital role in the production of many useful compounds. In this review, we summarize recent approaches to preparing azacycles via different methods as well as describe plausible reaction mechanisms.

Oxoammonium salt-promoted diverse functionalization of saturated cyclic amines with dinucleophiles

Oxoammonium salt-promoted diverse functionalization of saturated cyclic amines with different dinucleophiles under mild conditions is presented. Specifically, when thiocyanate is used as a 1,3-dinucleophile, hexahydrothiazolo[4,5-b]pyridin-2(3H)-one derivatives are formed via the formation of the β-TEMPO-tethered cyclic iminium ion as a key intermediate. By contrast, when benzene-1,2-diamine is used as a 1,4-dinucleophile, 2-alkylquinoxaline derivatives are afforded via generation of the β-oxo cyclic iminium ion as a key intermediate. In addition, the usefulness of 2-alkylquinoxalines is showcased through their facile conversion into N-(2-oxo-2-(quinoxalin-2-yl)ethyl)nitrous amides featuring the synthetically useful N-NO moiety and the carbonyl group.

B(C6 F5 )3 -Catalyzed Regioselective Ring Opening of Cyclic Amines with Hydrosilanes

Opening the ring of cyclic amines by regioselective fission of one of the carbon-nitrogen bonds greatly expands the repertoire of available nitrogen-containing skeletons. Unlike approaches starting from cyclic tertiary amines, methods that can directly open secondary amines are still scarce. The present work discloses an efficient reductive ring opening of either of these cyclic amines using PhSiH₃ under B(C₆ F₅ )₃ catalysis. By this, the direct transformation of unstrained cyclic amines into the corresponding acyclic amines is achieved in a simple one-pot operation. A stepwise mechanism proceeding through the intermediacy of silylammonium ions followed by reductive cleavage of a carbon-nitrogen bond was experimentally verified.

Economical Access to Diverse Enantiopure Tetrahydropyridines and Piperidines Enabled by Catalytic Borrowing Hydrogen

We disclose herein a catalytic borrowing hydrogen method that enables an unprecedented, economical one-pot access to enantiopure tetrahydropyridines with minimal reagent use or waste formation. This method couples a few classes of readily available substrates with commercially available 1,3-amino alcohols, and delivers the valuable tetrahydropyridines of different substitution patterns free of N-protection. Such transformations are highly challenging to achieve, as multiple redox steps need to be realized in a cascade and numerous side reactions including a facile aromatization have to be overcome. Highly diastereoselective functionalizations of tetrahydropyridines also result in a general access to enantiopure di- and tri-substituted piperidines, which ranks the topmost frequent N-heterocycle in commercial drugs.

Site- and enantioselective cross-coupling of saturated N-heterocycles with carboxylic acids by cooperative Ni/photoredox catalysis

Site- and enantioselective cross-coupling of saturated N-heterocycles and carboxylic acids-two of the most abundant and versatile functionalities-to form pharmaceutically relevant α-acylated amine derivatives remains a major challenge in organic synthesis. Here, we report a general strategy for the highly site- and enantioselective α-acylation of saturated N-heterocycles with in situ-activated carboxylic acids. This modular approach exploits the hydrogen-atom-transfer reactivity of photocatalytically generated chlorine radicals in combination with asymmetric nickel catalysis to selectively functionalize cyclic α-amino C-H bonds in the presence of benzylic, allylic, acyclic α-amino, and α-oxy methylene groups. The mild and scalable protocol requires no organometallic reagents, displays excellent chemo-, site- and enantioselectivity, and is amenable to late-stage diversification, including a modular synthesis of previously inaccessible Taxol derivatives. Mechanistic studies highlight the exceptional versatility of the chiral nickel catalyst in orchestrating (i) catalytic chlorine elimination, (ii) alkyl radical capture, (iii) cross-coupling, and (iv) asymmetric induction.

Overcoming Back Electron Transfer in the Electron Donor-Acceptor Complex-Mediated Visible Light-Driven Generation of α-Aminoalkyl Radicals from Secondary Anilines

An additive-free, visible light-driven annulation between N-aryl amino acids and maleimide to form tetrahydroquinolines (THQs) is disclosed. Photochemical activation of an electron donor-acceptor (EDA) complex between amino acids and maleimides drives the reaction, and aerobic oxygen acts as the terminal oxidant in the net oxidative process. A range of N-aryl amino acids and maleimides have been investigated as substrates to furnish the target THQ in good to excellent yield. Mechanistic investigations, including titration and UV-vis studies, demonstrate the key role of the EDA complex as the photoactive species.

Enantioselective Single and Dual α-C-H Bond Functionalization of Cyclic Amines via Enzymatic Carbene Transfer

Cyclic amines are ubiquitous structural motifs found in pharmaceuticals and biologically active natural products, making methods for their elaboration via direct C-H functionalization of considerable synthetic value. Herein, we report the development of an iron-based biocatalytic strategy for enantioselective α-C-H functionalization of pyrrolidines and other saturated N-heterocycles via a carbene transfer reaction with diazoacetone. Currently unreported for organometallic catalysts, this transformation can be accomplished in high yields, high catalytic activity, and high stereoselectivity (up to 99:1 e.r. and 20,350 TON) using engineered variants of cytochrome P450 CYP119 from Sulfolobus solfataricus. This methodology was further extended to enable enantioselective α-C-H functionalization in the presence of ethyl diazoacetate as carbene donor (up to 96:4 e.r. and 18,270 TON), and the two strategies were combined to achieve a one-pot as well as a tandem dual C-H functionalization of a cyclic amine substrate with enzyme-controlled diastereo- and enantiodivergent selectivity. This biocatalytic approach is amenable to gram-scale synthesis and can be applied to drug scaffolds for late-stage C-H functionalization. This work provides an efficient and tunable method for direct asymmetric α-C-H functionalization of saturated N-heterocycles, which should offer new opportunities for the synthesis, discovery, and optimization of bioactive molecules.

Regiospecific α-methylene functionalisation of tertiary amines with alkynes via Au-catalysed concerted one-proton/two-electron transfer to O2

Regioselective transformations of tertiary amines, which are ubiquitously present in natural products and drugs, are important for the development of novel medicines. In particular, the oxidative α-C-H functionalisation of tertiary amines with nucleophiles via iminium cations is a promising approach because, theoretically, there is almost no limit to the type of amine and functionalisation. However, most of the reports on oxidative α-C-H functionalisations are limited to α-methyl-selective or non-selective reactions, despite the frequent appearance of α-methylene-substituted amines in pharmaceutical fields. Herein, we develop an unusual oxidative regiospecific α-methylene functionalisation of structurally diverse tertiary amines with alkynes to synthesise various propargylic amines using a catalyst comprising Zn salts and hydroxyapatite-supported Au nanoparticles. Thorough experimental investigations suggest that the unusual α-methylene regiospecificity is probably due to a concerted one-proton/two-electron transfer from amines to O₂ on the Au nanoparticle catalyst, which paves the way to other α-methylene-specific functionalisations.

Oxoammonium Salt-Promoted Multifunctionalization of Saturated Cyclic Amines Based On β-Oxo Cyclic Iminium Ion Intermediates

Herein we describe a convenient method for multiple C(sp³)-H bond functionalization of saturated cyclic amines through oxoammonium salt-promoted oxidation to afford a β-oxo cyclic iminium ion as a key intermediate, followed by cascade addition with thiocyanate and diverse N-, O-, and S-containing nucleophiles in the green solvent and EtOH. Notably, chiral spiro azapolyheterocycles were prepared enantioselectively (>20:1 dr, up to 99% ee) when cysteine or serine esters were used as substrates. Moreover, the concise late-stage modification of several natural product derivatives was accomplished using this method.

Asymmetric addition of an N-methyl C(sp3)-H bond to cyclic alkenes enabled by an iridium/phosphine-olefin catalyst

Iridium-catalyzed asymmetric C-H addition of an N-methyl group on 3-trifluoromethyl-2-(N-methylamino)pyridine to cyclic alkenes was realized by using a phosphine-olefin ligand. Indene and its 7-substituted derivatives, acenaphthylene, and some bicyclic alkenes underwent the addition to give the corresponding products in good yields with high enantioselectivity.

Regioselective α-Cyanation of Unprotected Alicyclic Amines

Secondary alicyclic amines are converted to α-aminonitriles via addition of TMSCN to their corresponding imines, intermediates that are produced in situ via the oxidation of amine-derived lithium amides with simple ketone oxidants. Amines with an existing α-substituent undergo regioselective α'-cyanation even if the C-H bonds at that site are less activated. Amine α-arylation can be combined with α'-cyanation to generate difunctionalized products in a single operation.

Catalytic Lewis Base Additive Enables Selective Copper-Catalyzed Borylative α-C-H Allylation of Alicyclic Amines

Functionalized alicyclic amines are important building blocks for the synthesis of bioactive natural compounds and drugs. Existing methods of functionalization are typically limited to the synthesis of protected amines or the use of highly basic organometallic reagents that can compromise functional group tolerance. Here, we report a novel approach that enables the transformation of O-benzoyl hydroxylamines into α-functionalized cyclic secondary amines by means of a copper-catalyzed regio-, stereo-, and chemoselective coupling with allenes and bis(pinacolato)diboron. A key feature of the present transformation is the use of a catalytic Lewis base additive which inhibits the competing C–N bond forming reaction between the catalytically generated boron-substituted allylcopper intermediate with the O-benzoyl hydroxylamine, thus enabling in situ transformation of the latter into an alicyclic imine which undergoes selective C–C bond formation with the allylcopper species.

Synthesis of 2-Aryl Azetidines through Pd-Catalyzed Migration/Coupling of 3-Iodoazetidines and Aryl Boronic Acids

A palladium-catalyzed cross-coupling of 3-iodoazetidines and nonheteroaryl boronic acids was reported. The [1,1'-biphenyl]-2-yldicyclohexylphosphane ligand enabled the reaction that favored the formation of 2-aryl azetidines. The control experiments indicated that the reaction can proceed through either a palladium-hydride/dihydroazete complex or free dihydroazete intermediate followed by hydropalladation.

Kinetic Resolution of 2-Aryl-4-methylenepiperidines toward Enantioenriched Functionalizable Piperidine Fragments

The base n-BuLi with sparteine allows a kinetic resolution of N-Boc-2-aryl-4-methylenepiperidines. The 2,2-disubstituted products and recovered starting materials were isolated with high enantiomeric ratios. From VT-NMR spectroscopy and DFT studies, the rate of rotation of the N-Boc group is fast. Lithiation and trapping of the enantioenriched starting materials gave 2,2-disubstituted piperidines with retention of stereochemistry. Functionalization of the 4-methylene group led to a variety of 2,4-disubstituted piperidines without loss of enantiopurity that could be useful building blocks for drug discovery.

TEMPO-Promoted Mono- and Bisimidation of Tertiary Anilines: Synthesis of Symmetric and Unsymmetric N-Mannich Bases

A TEMPO-promoted method was developed for the synthesis of symmetric bis-N-Mannich bases via sequential activation of two α,α'-amino C(sp³)-H bonds of N,N-dimethylanilines under mild conditions. This methodology was further extended for monoimidation of α-amino-functionalized methylanilines to give unsymmetric N-Mannich bases in good to high yields. Several control experiments were performed, and the coupling reaction outcomes indicated that the oxoammonium (TEMPO⁺) species is involved in the reaction.

Hydroaminoalkylation for the Catalytic Addition of Amines to Alkenes or Alkynes: Diverse Mechanisms Enable Diverse Substrate Scope

Hydroaminoalkylation is a powerful, atom-economic catalytic reaction for the reaction of amines with alkenes and alkynes. This C-H functionalization reaction allows for the atom-economic alkylation of amines using simple alkenes or alkynes as the alkylating agents. This transformation has significant potential for transformative approaches in the pharmaceutical, agrochemical, and fine chemical industries in the preparation of selectively substituted amines and N-heterocycles and shows promise in materials science for the synthesis of functional and responsive aminated materials. Different early transition-metal, late transition-metal, and photoredox catalysts mediate hydroaminoalkylation by distinct mechanistic pathways. These mechanistic insights have resulted in the development of new catalysts and reaction conditions to realize hydroaminoalkylation with a broad range of substrates: activated and unactivated, terminal and internal, C-C double and triple bonds with aryl or alkyl primary, secondary, or tertiary amines, including N-heterocyclic amines. By deploying select catalysts with specific substrate combinations, control over regioselectivity, diastereoselectivity, and enantioselectivity has been realized. Key barriers to widespread adoption of this reaction include air and moisture sensitivity for early transition-metal catalysts as well as a heavy dependence on amine protecting or directing groups for late transition-metal or photocatalytic routes. Advances in improved catalyst robustness, substrate scope, and regio-/stereoselective reactions with early- and late transition-metal catalysts, as well as photoredox catalysis, are highlighted, and opportunities for further catalyst and reaction development are included. This perspective shows that hydroaminoalkylation has the potential to be a disruptive and transformative strategy for the synthesis of selectively substituted amines and N-heterocycles from simple amines and alkenes.

Photoinduced α-C-H Amination of Cyclic Amine Scaffolds Enabled by Polar-Radical Relay

Herein, we report a polar-radical relay strategy for α-C-H amination of cyclic amines with N-chloro-N-sodio-carbamates. The relay is initiated by in situ generation of cyclic iminium intermediate using N-iodosuccinimide (NIS) oxidant as an initiator, which then operates through a series of polar (addition and elimination) and radical (homolysis, hydrogen- and halogen atom transfer) reactions to enable the challenging C-N bond formation in a controlled manner. A broad range of α-amino cyclic amines were readily accessed with excellent regioselectivity, and the superb applicability was further demonstrated by functionalization of biologically relevant compounds.

Modular Access to Chiral α-(Hetero)aryl Amines via Ni/Photoredox-Catalyzed Enantioselective Cross-Coupling

Chiral α-aryl N-heterocycles are commonly found in natural products, pharmaceutical agents, and chiral catalysts but remain challenging to access via asymmetric catalysis. Herein, we report a general and modular approach for the direct enantioselective α-arylation of saturated azacycles and acyclic N-alkyl benzamides via nickel/photoredox dual catalysis. This process exploits the hydrogen atom transfer ability of photoeliminated chlorine radicals to convert azacycles to the corresponding α-amino alkyl radicals that then are coupled with ubiquitous and inexpensive (hetero)aryl chlorides. These coupling reactions require no oxidants or organometallic reagents, feature feedstock starting materials, a broad substrate scope, and high enantioselectivities, and are applicable to late-stage diversification of medicinally relevant complex molecules. Mechanistic studies suggest that the nickel catalyst uncommonly plays multiple roles, accomplishing chlorine radical generation, α-amino radical capture, cross-coupling, and asymmetric induction.

The quest for magic: recent advances in C(sp3)–H methylation

Frequently referred to as the “magic methyl” effect, the introduction of a methyl group into a biologically active molecule has the potential to drastically alter its physical and biological properties and significantly increase potency. This effect is most pronounced when the methyl group is added at the α-position of an aliphatic heterocycle or ortho to a large rotatable group on an aromatic ring. Although seminal developments in C–H activation strategies offered solutions to the latter, until recent years there had been no selective and functional-group-tolerant method for C(sp3)–H methylation at late stages of synthesis. For many years, the lack of a generally applicable methylation strategy necessitated arduous de novo synthesis approaches to access methylated drug candidates, and discouraged further investigation and understandings of the magic methyl effect. This review will provide a summary of the most recent advances that enabled non-directed late-stage C(sp3)–H methylation, including through hydride transfer, chemical or anodic oxidation, and photocatalytic hydrogen atom transfer.

Asymmetric Synthesis of Pyrrolidines via Oxetane Desymmetrization

Asymmetric synthesis of chiral pyrrolidines bearing an all-carbon quaternary stereocenter in the 3-position remains challenging. Herein we report two efficient protocols by means of oxetane desymmetrization, featuring the use of a readily available tert-butylsulfinamide chiral auxiliary and a catalytic system with chiral phosphoric acid as the source of chirality, respectively.

Synthesis of Polycyclic Isoindolines via α-C-H/N-H Annulation of Alicyclic Amines

Relatively unstable cyclic imines, generated in situ from their corresponding alicyclic amines via oxidation of their lithium amides with simple ketone oxidants, engage aryllithium compounds containing a leaving group on an ortho-methylene functionality to provide polycyclic isoindolines in a single operation. The scope of this transformation includes pyrrolidine, piperidine, azepane, azocane, and piperazines.