Mechanofluorochromic Materials Based on Aggregation-Induced Emission-Active Boron Ketoiminates: Regulation of the Direction of the Emission Color Changes

Tetra-coordinated organoboron complexes with triaminoguanidine-salicylidene based ligands: aggregation induced enhanced emission and mechanoresponsive features

Organoboron complexes have garnered significant attention due to their remarkable optical properties and diverse applications. However, synthesizing stable fused five-, six- and seven-membered organoboron complexes possess significant challenges. In this study, we successfully developed novel mono-nuclear (6-8 & 10) and di-nuclear (9) organoboron complexes supported by triaminoguanidine-salicylidene based C3-symmetric Schiff base ligands via one-step condensation reaction with excess phenylboronic acid. Single-crystal X-ray diffraction analysis revealed that in the mononuclear complexes (6-8 & 10), boron atoms adopt tetrahedral geometry with fused five-membered N-B-N and six-membered O-B-N chelate ring whereas in the dinuclear complex (9), two boron atoms exist in distinct coordination environment, forming four fused boron-incorporated rings, including six-membered N-B-N, six-membered O-B-N, seven-membered N-B-O and five-membered N-B-N chelate rings. Our findings provide a unique family of mononuclear organoboron complexes and dinuclear organoboron complex with ESIPT unit. Aggregation induced enhanced emission features of the compounds were established in THF-water mixture and supported by DLS and SEM analyses. Interestingly, compound 6, 9 and 10 shows interesting mechanoresponsive features upon grinding.

Mechanofluorochromic behaviors and latent fingerprint detection of triphenylamine-based compounds with mono-/bis-BF2 fluorophores

To better understand the relationship between molecular structure of the mono-/bis-BF2-core compounds and mechanofluoroboron behaviors, two pyridine-based difluoroboron compounds with triphenylamine group (TPA-ts-BF2 and TPA-ts-2BF2) were designed and successfully synthesized, which TPA-ts-BF2 including a BF2 fluorophore and TPA-ts-2BF2 containing the bisBF2 fluorophores. Based on the photophysical properties measurements results, it was found that TPA-ts-2BF2 had more excellent intramolecular charge transfer characteristics than that of TPA-ts-BF2, and exhibited significant aggregation-induced emission activity, however, TPA-ts-BF2 displayed typical aggregation-caused quenching phenomenon. Meanwhile, the emission spectrum of the solid powders of TPA-ts-2BF2 was red-shifted 52 nm after grinding, that of TPA-ts-BF2 was red-shifted 46 nm, which was resulted from crystalline state switching to amorphous state. According to the theoretical calculations, we conjectured that TPA-ts-BF2 with uncoordinated amide linkage moiety had a tendency to forming a more twisted conformance and higher molecular polarity, which made that mechanofluorochromic behavior was worse than that of TPA-ts-2BF2. Additionally, TPA-ts-2BF2 was applied to latent fingerprint detection due to its prime aggregation-induced emission property.

Rhodium(III)-Catalyzed Coupling of Quinolin-8-carboxaldehydes with CF3-Imidoyl Sulfoxonium Ylides by Chelation-Assisted C(sp2)-H Bond Activation for the Synthesis of Trifluoromethyl-Substituted Enaminones

A rhodium(III)-catalyzed aldehydic C(sp2)-H imidoylmethylation of quinolin-8-carboxaldehydes with CF3-imidoyl sulfoxonium ylides (TFISYs) has been developed for the generation of α-imino ketones, which could be readily tautomerized to enaminones in moderate to excellent yields. In the transformation, TFISYs act as a kind of masked alkenylating reagents for the aldehyde moiety, and the obtained CF3-enaminone products have been successfully converted into other useful trifluoromethyl-substituted heterocycles.

Iron(III) and BF3·OEt2-Promoted O-Transfer Reaction of N-Aryl-α,β-Unsaturated Nitrones to Prepare Difluoroboron β-Ketoiminates

We described an iron(III) and BF3·OEt2-promoted oxygen transfer reaction of N-aryl-α,β-unsaturated nitrones to prepare various N,O-difluoroboron β-ketoiminates in good yields ranging from 24% to 87%. Control experiments revealed that the enaminone was the vital intermediate for the formation of N,O-difluoroboron β-ketoiminates, and iron(III) combined with BF3·OEt2 played as cocatalyst to promote the oxygen transfer reaction through intramolecular cyclization and N-O bond cleavage. More importantly, an estrone-derived N,O-difluoroboron β-ketoiminate was easily prepared in 40% yield from estrone in four steps.

Synthesis of Regioregular and Random Boron-Fused Azomethine Conjugated Polymers for Film Morphology Control

Regioregular and random conjugated polymers based on a boron-fused azomethine unit were synthesized by Sonogashira-Hagihara cross coupling reaction. Although these polymers exhibited similar optical properties in the solution states, a distinct difference was observed in the aggregation forming ability in the film states; scanning electron microscope (SEM) observation indicated the existence of fiber-like aggregates in the spin-coated film of the regioregular polymer, while regiorandom polymer showed no aggregate in the film state. Accordingly, the UV-vis absorption spectrum of the regioregular polymer showed an increased shoulder peak due to the aggregate formation, whereas the random one showed no change. Furthermore, an absolute fluorescence quantum efficiency of the regioregular polymer was enhanced in response to the aggregate disassembly via thermal annealing treatment. In this study, we demonstrate that controlling regioregularity of the conjugated polymers can induce the different morphological structures and thermal-responsive behaviors. These findings could be beneficial for the design strategy and potential applications of thin-film optoelectronic devices with stimuli-responsive properties.

Mechanofluorochromic Properties of 1,4-Diphenylanthracene Derivatives with Hypsochromic Shift

Several types of 1,4-diphenylanthracene derivatives 1-4 were prepared, and their photophysical properties were observed in the solid and solution states. Interestingly, the CN-group-substituted 1,4-diphenylanthracene derivative 2 was found to exhibit a higher fluorescence quantum yield (ϕf = 0.71) in the solid state than in the solution state, probably due to the formation of an intermolecular Ar-CN⋯H-Ar hydrogen bond and antiparallel type locked packing structure in the solid state. Furthermore, for some derivatives, an increase in the fluorescence quantum yield was observed in the PMMA film (1 wt%) over both the solid state and the solution state. More interestingly, some of the 1,4-diphenylanthracene derivatives exhibited unusual mechanofluorochromic properties with a "hypsochromic shift" in luminous color depending on the substituents of the phenyl group, and with the derivatives having CF3, OMe, CN, and two F substituents (1d-1f, 2-4) showing a significant luminous color change with a "hypsochromic shift" after grinding. However, no change in the luminous color was observed for the derivatives having H, Me, and one F substituent (1a-1c), and especially for some of the CN-substituted derivatives, a reversible luminous color change with a "hypsochromic shift" was observed, probably due to the formation of an antiparallel type packing structure. These "hypsochromic" anthracene derivatives could probably be utilized as new mechanofluorochromic materials.

Fluorene-naphthalene Schiff base as a smart pigment in invisible ink with multiple security features for advanced anticounterfeiting and forensic applications

Smart functional materials with captivating optical properties are of immense importance due to their versatile applicability in anticounterfeiting and forensic science. A fluorene-naphthalene Schiff base (FNH) that displays aggregation induced emission, mechanofluorochromism and excitation wavelength dependent fluorescence inherent to the pristine and ground samples is synthesized. Water/solvent-based invisible security inks for flexo/screen printing were formulated using FNH as a smart pigment to check the originality of documents/branded products etc. The prints with good photostability, adherence to substrate and rub resistance are invisible in daylight showcasing multiple non-destructive and destructive techniques to authenticate the document. The inked area on UV dull paper substrate exhibits a weak emission, which is observed by the forger under UVA light. However, the user can validate the authenticity of the document by rubbing the print with hard objects, especially using a metal coin or glass rod to perceive a human eye detectable intensification in the orange fluorescence under the same illumination source. The intensity of the orange fluorescence reverts to the original, which enables the reuse of the security document after originality check. Yet another nondestructive authentication method is to observe a cyan fluorescence from the print and orangish yellow fluorescence from the rubbed printed region when shined with a 270-400 nm light source, whereas a cyanish green fluorescence both from the unrubbed and rubbed regions of the print when illuminated with a visible light source ranging from 420 to 480 nm. An additional verification through a destructive technique is to perceive red and yellow fluorescence of the ink film upon contact with THF and NaOH/KOH, respectively and a penetrating red fluorescence from the rear side of the THF-exposed printed area of the paper. The multi-level security features that cannot be easily replicated by the forger but allows a simple and easy validation process by the user are unique to FNH, used as a single pigment in the inks. Further, the applicability of the ground FNH in forensic science is established to distinctly observe Level I to II details of latent fingerprints.

Facile Synthesis of Tetraphenylethene (TPE)-Based Fluorophores Derived by π-Extended Systems: Opposite Mechanofluorochromism, Anti-Counterfeiting and Bioimaging

Although remarkable progresses are achieved in the design and development of the mono-shift in photoluminescence for mechanofluorochromic materials, it is still a severe challenge to explore the opposite mechanofluorochromic materials with both blue- and red-shifted photoluminescence. Herein, two unprecedented 4,5-bis(TPE)-1H-imidazole fused pyridine or quinoline-based fluorophores X-1 and X-2 were designed and synthesized, and X-1 and X-2, exhibit completely opposite mechanofluorochromic behavior. Under UV lamp, the color of pristine X-1 changed from blue to green with reversible redshifted 27 nm in fluorescence emission spectra after ground, while the color of pristine X-2 changed from red to yellow with reversible blue-shifted 74 nm after ground. The detailed characterizations (including PXRD, SEM and DSC) confirmed that this opposite mechanofluorochromism was attributed to the transformation of order-crystalline and amorphous states. The crystal structure analysis and theoretical calculation further explain that opposite mechanofluorochromic behavior take into account different π-π stacking mode by induced π-extended systems. In addition, these TPE-based fluorophores (X-1 and X-2) exhibited excellent bio-compatibility and fluorescence properties for bio-imaging, writable data storage and anti-counterfeiting materials.

Mechanical and Thermal ON-OFF Switching of the Vapochromic Behavior of a Luminescent Polymorphic Pt(II) Complex

Vapochromic materials that exhibit color/luminescence changes induced by vapor exposure have attracted considerable attention. Herein, we report the grinding- and heating-induced ON-OFF switching of the vapochromic behavior of [Pt(ppyCl₂)(Clacac)] (1; ppyCl₂ = 2-(3-chlorophenyl)-4-chloropyridinato, Clacac = 3-chloroacetylacetonato). 1 formed yellow and orange polymorphs (1-Y and 1-O), and 1-Y could be converted to 1-Og, which showed a very similar crystal structure but with a broadened X-ray diffraction pattern compared with that of 1-O. Moreover, 1-Og can be reversibly transformed into 1-O via heating and grinding. Notably, 1-Og underwent a N,N-dimethylacetamide vapor-induced transformation to 1-Y, whereas 1-O did not undergo such a transformation. These results indicate the ON-OFF switching of vapochromic behavior induced via grinding and heating. This finding will be beneficial for developing intelligent molecular devices.

Polydimethylsiloxanes with Grafted Dibenzoylmethanatoboron Difluoride: Synthesis and Properties

A method for the preparation of polydimethylsiloxanes with grafted methoxy-substituted dibenzoylmethanatoboron difluoride has been described. The structures of prepared polymers were confirmed using NMR, IR spectroscopy and gel permeation chromatography methods. Their thermal properties were investigated using thermal gravimetric analysis, differential scanning calorimetry and thermomechanical analysis. The prepared polymers had good thermal (Td5% up to 393 °C) and thermo-oxidative (Td5% = 413 °C) stability. The polymers started to transit in a viscous flow state at about 40 °C (for 3 a) and at about 20 °C (for 3 b). The viscoelastic characteristics of prepared polymers were determined in the sinusoidal oscillating vibrations mode. It was shown that the studied polymers at low frequencies at room temperature are viscoelastic fluids (G′ < G″). Increasing the frequency led to inversion (crossover) of dependences G′ and G″, which indicated the transition of polymers from viscous to elastomeric behavior characteristics, and the beginning of the formation of a physical network. Optical properties were studied using electron absorption, steady-state and time-resolved fluorescence spectroscopy. It was shown that intramolecular H-dimers exist in the ground state. The polymers studied had a bright fluorescence in the solution and in the solid state, consisting of bands of monomer and excimer emission. Thermally-activated delayed fluorescence was observed in the solution and the solid state. The prepared polymers possess intriguing properties that make them useful as optical materials, sensors or imaging agents.

Thiazole Boron Difluoride Dyes with Large Stokes Shift, Solid State Emission and Room-Temperature Phosphorescence

The small Stokes shift and weak emission in the solid state are two main shortcomings associated with the boron-dipyrromethene (BODIPY) family of dyes. This study presents the design, synthesis and luminescent properties of boron difluoro complexes of 2-aryl-5-alkylamino-4-alkylaminocarbonylthiazoles. These dyes display Stokes shifts (Δλ, 77-101 nm) with quantum yields (ϕ_FL ) up to 64.9 and 34.7 % in toluene solution and in solid state, respectively. Some of these compounds exhibit dual fluorescence and room-temperature phosphorescence (RTP) emission properties with modulable phosphorescence quantum yields (ϕ_PL ) and lifetime (τ_p up to 251 μs). The presence of intramolecular H-bonds and negligible π-π stacking revealed by X-ray crystal structure might account for the observed large Stokes shift and significant solid-state emission of these fluorophores, while the enhanced spin-orbit coupling (SOC) of iodine and the self-assembly driven by halogen bonding, π-π and C-H^… π interactions could be responsible for the observed RTP of iodine containing phosphors.

Inkjet printing of mechanochromic fluorenylidene-acridane

In mechanochromic material research, a serious problem is that mechanical treatment cannot be applied to the materials because of their responsiveness to stimuli. Inkjet printing is a useful solution deposition method for electronics, but materials must be processed to be suitable for an inkjet printer. Fluorenylidene-acridane (FA) exhibits ground-state mechanochromism with visual color changes and responds not only to mechanical pressure but also to alcohol. Alcohol inhibits the color change induced by mechanical stimulation because the mechanochromism of FA is based on a conformational change in its molecular structure. This phenomenon suggests that the mechanochromism of FA can be controlled using alcohol. For use in inkjet printing, minute particles of FA obtained by bead milling in ethanol were investigated for uniformity and size by scanning electron microscopy and gas adsorption measurement. Also, ink containing FA particles was prepared and examined for physical properties such as viscosity and surface tension. It was confirmed that the inkjet-printed pattern demonstrated visual color changes between yellow and green in response to mechanical pressure and alcohol. This report describing the control of mechanochromism and its specific application is expected to contribute to broadening the mechanochromic materials research field.

Mechanofluorochromism of (D-π-)2A-type azine-based fluorescent dyes

Bathochromic or hypsochromic shift-type mechanofluorochromism (b-MFC or h-MFC) was found for (D-π-)2A-type azine-based fluorescent dyes OUY-2, OUK-2, and OUJ-2 possessing intramolecular charge-transfer (ICT) characteristics from two (diphenylamino)carbazole-thiophene units as D (electron-donating group)-π (π-conjugated bridge) moieties to a pyridine, pyrazine, or triazine ring as A (electron-withdrawing group): grinding of the recrystallized dyes induced red or blue shifts of the fluorescent colors, that is, bathochromic or hypsochromic shifts of the fluorescence maximum wavelengths (λfl-solid max). The degrees of MFC evaluated by the absolute value of differences (Δλ fl-solid max) in λfl-solid max before and after grinding of the recrystallized dyes increased in the order of OUY-2 (+7 nm) < OUK-2 (-17 nm) < OUJ-2 (+45 nm), so that OUJ-2 exhibits obvious b-MFC, but OUK-2 exhibits h-MFC. X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC) demonstrated that the recrystallized dyes were in the crystalline state but the ground dyes were in the amorphous state. When the ground solids were heated above their crystallization temperatures (T c), the colors and fluorescent colors recovered to the original ones before grinding or converted to other ones, that is, heating the ground solids in the amorphous state induced the recrystallization to recover the original microcrystals or to form other microcrystals due to polymorph transformation. However, (D-π-)2Ph-type fluorescent dye OTK-2 having a phenyl group as a substitute for the azine rings exhibited non-obvious MFC. Molecular orbital (MO) calculations indicated that the values of the dipole moments (μ g) in the ground state were 4.0 debye, 1.4 debye, 3.2 debye, and 2.9 debye for OTK-2, OUY-2, OUK-2, and OUJ-2, respectively. Consequently, on the basis of experimental results and MO calculations, we have demonstrated that the MFC of the (D-π-)2A-type azine-based fluorescent dyes is attributed to reversible switching between the crystalline state of the recrystallized dyes and the amorphous state of the ground dyes with changes in the intermolecular dipole-dipole and π-π interactions before and after grinding. Moreover, this work reveals that (D-π-)2A fluorescent dyes possessing dipole moments of ca. 3 debye as well as moderate or intense ICT characteristics make it possible to activate the MFC.

Recent advances in the synthesis of luminescent tetra-coordinated boron compounds

Tetra-coordinated boron compounds offer a plethora of luminescent materials. Different chelation around the boron center (O,O-, N,C-, N,O-, and N,N-) has been explored to tune the electronic and photophysical properties of tetra-coordinated boron compounds. A number of fascinating molecules with interesting properties such as aggregation induced emission, mechanochromism and tunable emission by changing the solvent polarity were realised. Owing to their rich and unique properties, some of the molecules have shown applications in making optoelectronic devices, probes and so on. This perspective provides an overview of the recent developments of tetra-coordinated boron compounds and their potential applications.

Recent Progresses on Designable Hybrids with Stimuli-Responsive Optical Properties Originating from Molecular Assembly Concerning Polyhedral Oligomeric Silsesquioxane

In this review, we describe recent progresses on the stimuli-responsive hybrid materials based on polyhedral oligomeric silsesquioxane (POSS) and their applications as a chemical sensor. In particular, we explain the unique functions originating from molecular assembly concerning POSS-containing soft materials mainly from our studies. POSS has an inorganic cubic core composed of silicon-oxygen (Si-O) bonds and organic substituents at each vertex. Owing to intrinsic properties of POSS, such as high thermal stability, rigidity, and low chemical reactivity, various robust hybrid materials have been developed. From the numerous numbers of POSS hybrids, we herein focus on the environment-sensitive optical materials in which molecular assembly of POSS itself and functional units connected to POSS should be a key factor for expressing material properties. We also explain the mechanisms of chemical sensors originating from these stimuli-responsive optical properties. Stimuli-responsive excimer emission and pollutant detectors, nanoplastic sensors with the water-dispersive POSS networks, trans fatty acid sensors, turn-on luminescent sensors for aerobic condition and fluoride anion sensors are described. We also mention the mechanochromic polyurethane hybrids and the thermally-durable mechanochromic luminescent materials. The roles of the unique optical properties from soft materials composed of rigid POSS, which doesn't have significant light-absorption and emission properties in the visible region, are surveyed.

CuCl2·2H2O/TBHP mediated synthesis of β-enaminones via coupling reaction of vinyl azides with aldehydes

A facile and efficient oxidative functionalization of vinyl azides with aldehydes furnishing a diverse array of β-acylated enaminones was developed. The cross coupling was accomplished in the presence of CuCl₂·2H₂O/TBHP and produced the desired β-acylated enaminones in a (Z)-stereo-selective and atom-economic manner, which make this protocol particularly attractive. In the transformation, the new C-C and C-N bonds were formed via a one-pot strategy including the process of radical addition and recombination.

Novel DBMBF2-BODIPY dyads connected via a flexible linker: synthesis and photophysical properties

Novel BODIPY and DBMBF2 dyads connected via a flexible trisiloxane linker were synthesized and their photophysical properties were investigated.

Achieving tricolor luminescence switching from a stimuli-responsive luminophore based on a bisarylic methanone derivative

A new, D–A type bisarylic methanone π-architecture DBF-BZ-TPA with highly distorted molecular conformations exhibits a unique ICT effect, intense solid-state fluorescence, and high-contrast and tricolor luminescence switching.

Synthesis and n-Type Semiconducting Properties of Bis(dioxaborin) Compounds Containing a π-Extended 2,2'-Bithiophene Structure

Bis(dioxaborin) compounds containing π-conjugated systems have been studied as n-type semiconductors for organic field-effect transistors (OFETs). In this study, with the aim of investigating the effect of the extension of the π-conjugation on the n-type semiconducting properties and stability of bis(dioxaborin) compounds, we synthesized new compounds containing 2,2'-bithiophene derivatives extended with an olefin or an acetylene spacer. The absorption maxima of the compounds containing olefin spacers were greatly red-shifted compared with those of the original compound without a π-spacer. The newly synthesized compounds exhibited high electron affinity, and the olefin spacers effectively reduced the on-site Coulomb repulsion in the two-electron reduction of the compounds. An OFET fabricated using one of these compounds having a layer-by-layer crystal structure exhibited n-type semiconductor behavior with a low threshold voltage, most likely due to the small on-site Coulomb repulsion. The electron-transporting properties were investigated by theoretical calculations based on the Marcus theory.

Density-Dependent Emission Colors from a Conformation-Switching Chromophore in Polyurethanes

Achieving full-color emission from a single chromophore is not only highly desirable from practical considerations, but also greatly challenging for fundamental research. Herein, we demonstrated the density-dependent emission colors from a single boron-containing chromophore, from which multi-color fluorescent polyurethanes were prepared as well. Originating from its switchable molecular conformations, the emission color of the chromophore was found to be governed by the packing density and strongly influenced by hydrogen bonding interactions. The chromophore was incorporated into polyurethanes to achieve full-color emitting materials; the emission color was only dependent on the chromophore density and could be tuned via synthetic approach by controlling the compositions. The emission colors could also be modulated by physical approaches, including by swelling/deswelling process, compression under high pressure, and even blending the fluorescent polyurethane with non-emitting ones.

Molecular design and application of luminescent materials composed of group 13 elements with an aggregation-induced emission property

Complexation of π-conjugated ligands by metal or semimetal ions leads to the enhancement of the planarity and rigidity of π-conjugated systems. Boron, especially, has played a central role in the design of luminescent main-group complexes. However, these complexes still suffer the disadvantage of aggregation-caused quenching as well as typical organic fluorophores. It has recently been reported that some types of boron complexes exhibit the aggregation-induced emission (AIE) property. Moreover, AIE behavior from complexes and organometallic compounds composed of the other group 13 elements, such as aluminum and gallium, has emerged in this decade. These observations greatly encourage us to develop advanced functional materials based on the group 13 elements. Indeed, recent research has demonstrated that these classes of materials are potentially versatile scaffolds for constructing chromic luminophores, efficiently emissive π-conjugated polymers and so on. This review mainly describes AIE-active group 13 complexes with four-coordinate structures and their application as photo-functional materials. Proposed mechanisms of the origins of AIE behavior are briefly discussed.

Molecular copper iodide clusters: a distinguishing family of mechanochromic luminescent compounds

Mechanochromic luminescent materials displaying switchable luminescence properties in response to external mechanical force are currently attracting wide interest because of their multiple potential applications. In the growing number of mechanochromic luminescent compounds, mechanochromic complexes based on copper present appealing features with a large variety of mechanochromic properties and economical advantages over other metals. Among Cu-based compounds, molecular copper iodide clusters of cubane geometry with formula [Cu₄I₄L₄] (L = organic ligand) stand out. Indeed, they can exhibit multiple luminescent stimuli-responsive properties, being particularly suitable for the development of multifunctional photoactive systems. This perspective describes the survey of these mechanochromic luminescent cubane copper iodide clusters. Based on our investigations, their mechanochromic luminescence properties are presented along with the study of the underlying mechanism. Establishment of structure-property relationships supported by various characterization techniques and associated with theoretical investigations permits gaining insights into the mechanism at play. Studies of other researcher groups are also described and illustrate the interest shown by these mechanochromic compounds. Mechanically responsive films are reported, demonstrating their potential use in a range of applications of such copper-based stimuli-responsive materials. Current challenges faced by the development of technological applications are finally outlined.

Regulation of Multicolor Fluorescence Changes Found in Donor-acceptor-type Mechanochromic Fluorescent Dyes

The regulation of multicolor fluorescence changes in mechanochromic fluorescence (MCF) remains a challenging task. Herein, we report the regulation of MCF using a donor-acceptor structure. Two crystal polymorphs, BTD-pCHO(O) and BTD-pCHO(R) produced by the introduction of formyl groups to an MCF dye, respond to a mechanical stimulus, allowing a three-color fluorescence change. Specifically, the orange-colored fluorescence of the metastable BTD-pCHO(O) polymorph changed to a deep-red color in the amorphous-like state to finally give a red color in the stable BTD-pCHO(R) polymorph. This change occurred by mechanical grinding followed by vapor fuming. The two different crystal packing patterns were selectively regulated by the electronic effect of the introduced functional groups. The two types of selectively formed crystals in BTD(F)-pCHO bearing fluorine atoms, and BTD(OMe)-pCHO bearing methoxy groups, respond to mechanical grinding, allowing for the regulation of multicolor MCL from a three-color change to two different types of two-color changes.

Reversible Vapochromic Luminescence Accompanied by Planar Half-Chair Conformational Change of a Propeller-Shaped Boron β-Diketiminate Complex

Leakage of volatile organic compounds (VOCs) is one of the most severe industrial problems, because it can cause environmental pollution, global warming, fire, and explosion. Hence, the visualization of leakage is an essential technology to detect it at an early stage. Molecular crystals, fluorescence color of which can be changed by the exposure to VOCs could potentially serve as the sensing materials for realizing rapid and facile VOC detection. However, these materials usually require harsh conditions, such as heating or a vacuum, to recover their initial phases for reuse. Therefore, it remains a challenge to obtain completely reversible sensing systems without such energy-consuming recycling processes. Herein, the reversible color change of fluorescence from the crystals of a propeller-shaped boron β-diketiminate complex is reported. The complex was crystallized in distinct crystalline phases having different luminescent colors. Importantly, these phases were interconverted very rapidly (time constant <60 s) and repeatedly upon exposure to the vapors of the appropriate VOCs. The small energy differences between conformers of the complex could lead to this pseudopolymorphic behavior. This finding could be applied for the development of further eco-friendly reversible sensing materials based on four-coordinated boron complexes.

Vapochromic Luminescent π-Conjugated Systems with Reversible Coordination-Number Control of Hypervalent Tin(IV)-Fused Azobenzene Complexes

The dynamic and reversible changes of coordination numbers between five and six in solution and solid states, based on hypervalent tin(IV)-fused azobenzene (TAz) complexes, are reported. It was found that the TAz complexes showed deep-red emission owing to the hypervalent bond composed of an electron-donating three-center four-electron (3c-4e) bond and an electron-accepting nitrogen-tin (N-Sn) coordination. Furthermore, hypsochromic shifts in optical spectra were observed in Lewis basic solvents because of alteration of the coordination number from five to six. In particular, vapochromic luminescence was induced by attachment of dimethyl sulfoxide (DMSO) vapor to the coordination point at the tin atom accompanied with a crystal-crystal phase transition. Additionally, the color-change mechanism and degree of binding constants were well explained by theoretical calculation. To the best of our knowledge, this is the first example of vapochromic luminescence by using stable and variable coordination numbers of hypervalent bonds.

π-Conjugated Materials Derived From Boron-Chalcogenophene Combination. A Brief Description of Synthetic Routes and Optoelectronic Applications

Functional materials composed of Boron-chalcogenophene conjugates have emerged as promising ensemble featuring commendable optoelectronic properties. This review describes the categories, synthetic routes and optoelectronic applications of a range of boron-chalcogenophene conjugates. Conjugation and linking of different types of tri- and tetra-coordinated boron moieties with chalcogenophenes have remained an important strategy for constructing a range of functional materials. Synthetic protocols have been devised to efficiently prepare such chemically robust conjugates, often exhibiting a myriad of photophysical properties, redox capabilities and also solid-state behaviors. Tin-boron and silicon-boron exchange protocols have been efficiently adapted to access these boron-chalcogenophenes. Few other commonly used methods namely, hydroboration of alkynes as well as electrophilic borylations are also mentioned. The chemical and electronic properties of such boron-chalcogenophene conjugates are directly influenced by the strong Lewis acid character of trivalent boranes which can further alter the intra- and inter- molecular Lewis acid-base interactions. Apart from the synthetic protocols, recent advances in the application of these boron-chalcogenophene conjugates towards analyte sensing, organic electronics, molecular switches and several other aspects will be discussed in this review.

Discovery of Functional Luminescence Properties Based on Flexible and Bendable Boron-Fused Azomethine/Azobenzene Complexes with O,N,O-Type Tridentate Ligands

Azomethine (C=N) and azo (N=N) scaffolds are a part of structural units in poly(p-phenylene azomethine) (PAM) and poly(p-phenylene azo) (PAZ), respectively. Poly(p-phenylene vinylene) (PPV) is known to be one of luminescent π-conjugated polymers, meanwhile PAM and PAZ, which are the aza-substituted PPV analogues, are regarded as weak or no emissive materials. However, by the boron complexation, intense emission can be induced. Furthermore, environment-sensitivity and stimuli-responsivity were also observed. In this review, we demonstrate unique and versatile luminescent properties based on "flexible and bendable" π-conjugated systems composed of the boron-fused azomethine and azobenzene complexes (BAm and BAz) with the O,N,O-type tridentate ligands. The "flexible and bendable" luminophores showed intriguing optical behaviors, such as thermosalient effect, aggregation-induced emission (AIE) and crystallized-induced emission (CIE). Moreover, highly efficient emissions both in solution and film states were observed from the polymers. We illustrate the results and mechanisms on these luminescent properties from the series of our recent studies with BAm and BAz complexes and polymers.

Trisulfur-Radical-Anion-Triggered C(sp2)-H Amination of Electron-Deficient Alkenes

A trisulfur-radical-anion (S₃̇^-)-triggered C(sp²)-H amination of α,β-unsaturated carbonyl derivatives with simple amines has been demonstrated. This protocol provides convenient access to a variety of synthetically valuable N-unprotected and secondary β-enaminones with absolute Z selectivity and tertiary β-enaminones with E selectivity. Mechanistic probe and electronic structure theory calculations suggest that S₃̇^- initiates the nucleophilic attacks via a thiirane intermediate.

Intercalation and flexibility chemistries of soft layered materials

Layered materials, alternate stackings of two or more components, are found in a wide range of scales. Chemists can design and synthesize layered structures containing functional units. The soft-type layered materials exhibit characteristic dynamic functions originating from two-dimensional (2D) anisotropy and structure flexibility. This feature article focuses on "intercalation" and "flexibility" as two new perspectives for designing soft layered materials. Intercalation of guests is a characteristic approach for design of layered structures. Flexibility is an important factor to control the dynamic functions of the layered structures. As a model case, the intercalation-induced tunable stimuli-responsive color-change properties of layered polydiacetylene (PDA) are introduced to study the impact of the intercalation and flexibility on the dynamic functions. Recently, layered materials have drastically expanded the research area from conventional rigid inorganic compounds to new self-assembled nanostructures consisting of organic components, such as polymers, metal-organic frameworks, and covalent-organic frameworks. These new layered architectures have potentials for exhibiting dynamic functions originating from the structure flexibility beyond the static properties originating from classical intercalation and host-guest chemistries. Therefore, intercalation and flexibility chemistries of soft layered materials are regarded as new perspectives for design of advanced dynamic functional materials.

Mechanochromic Delayed Fluorescence Switching in Propeller-Shaped Carbazole-Isophthalonitrile Luminogens with Stimuli-Responsive Intramolecular Charge-Transfer Excited States

Herein, the universal design of high-efficiency stimuli-responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli-triggered TADF switching for a series of carbazole-isophthalonitrile-based donor-acceptor (D-A) luminogens is demonstrated based on systematic photophysical and X-ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D-A twisting in the excited-state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light-emitting diodes using a single TADF emitter.

Equilibrium and thermodynamic studies of chromic overcrowded fluorenylidene-acridanes with modified fluorene moieties

Chromic materials, an important class of stimuli-responsive materials, have aroused extensive attention in recent years. Normally, their color is based on changes in morphology. Few examples of chromic material based on conformational isomerization, such as in overcrowded alkenes, have been reported previously. Furthemore, experimental thermodynamic studies of overcrowded bistricyclic aromatic enes have not been carried out to our knowledge. Here, we show that N-phenyl-substituted fluorenylidene-acridanes, with a properly modified fluorene moiety, performs chromisms originating from conformational changes. Thermodynamic studies determine equilibrium constants, changes in enthalpy, entropy, and free energy in solution, enabling in-depth understanding of the equilibrium behavior of overcrowded alkenes and providing useful information for designing functional chromic compounds. Single-crystal X-ray diffraction analysis of fluorenylidene-acridanes in this work clearly shows well-tuned charge transfer from the acridane to the fluorene moiety. Various chromic behaviors such as mechanochromism, thermochromism, solvatochromism, vapochromism, and proton-induced chromism also support understanding of conformational isomerism.

Synthesis and Photovoltaic Properties of Boron β-Ketoiminate Dyes Forming a Linear Donor-π-Acceptor Structure

Organoboron complexes are of interest as chromophores for dye sensitizers owing to their light-harvesting and carrier-transporting properties. In this study, compounds containing boron β-ketoiminate (BKI) as a chromophore were synthesized and used as dye sensitizers in dye-sensitized solar cells. The new dyes were orange or red crystals and showed maximum absorptions in the 410-450 nm wavelength region on titanium dioxide substrates. These electrodes exhibited maximum efficiencies of over 80% in incident photon-to-current conversion efficiency spectra, suggesting that the continuous process of light absorption-excitation-electron injection was effectively performed. Open-circuit photovoltages were relatively high owing to the large dipole moments of the BKI dyes with a linear molecular structure. Thus, a maximum power conversion efficiency of 5.3% was successfully observed. Comparison of BKI dyes with boron β-diketonate dyes revealed certain differences in solution stability, spectral properties, and photovoltaic characteristics.