Iron Porphyrin Allows Fast and Selective Electrocatalytic Conversion of CO2 to CO in a Flow Cell

Mitigating Cobalt Phthalocyanine Aggregation in Electrocatalyst Films through Codeposition with an Axially Coordinating Polymer

Cobalt phthalocyanine (CoPc) is a promising molecular catalyst for aqueous electroreduction of CO2, but its catalytic activity is limited by aggregation at high loadings. Codeposition of CoPc onto electrode surfaces with the coordinating polymer poly(4-vinylpyridine) (P4VP) mitigates aggregation in addition to providing other catalytic enhancements. Transmission and diffuse reflectance UV-vis measurements demonstrate that a combination of axial coordination and π-stacking effects from pyridyl moieties in P4VP serve to disperse cobalt phthalocyanine in deposition solutions and help prevent reaggregation in deposited films. Polymers lacking axial coordination, such as Nafion, are significantly less effective at cobalt phthalocyanine dispersion in both the deposition solution and in the deposited films. SEM images corroborate these findings through particle counts and morphological analysis. Electrochemical measurements show that CoPc codeposited with P4VPonto carbon electrode surfaces reduces CO2 with higher activity and selectivity compared to the catalyst codeposited with Nafion.

The meso-substituent electronic effect of Fe porphyrins on the electrocatalytic CO2 reduction reaction

We report Fe porphyrins bearing different meso-substituents for the electrocatalytic CO2 reduction reaction (CO2RR). By replacing two and four meso-phenyl groups of Fe tetraphenylporphyrin (FeTPP) with strong electron-withdrawing pentafluorophenyl groups, we synthesized FeF10TPP and FeF20TPP, respectively. We showed that FeTPP and FeF10TPP are active and selective for CO2-to-CO conversion in dimethylformamide with the former being more active, but FeF20TPP catalyzes hydrogen evolution rather than the CO2RR under the same conditions. Experimental and theoretical studies revealed that with more electron-withdrawing meso-substituents, the Fe center becomes electron-deficient and it becomes difficult for it to bind a CO2 molecule in its formal Fe0 state. This work is significant to illustrate the electronic effects of catalysts on binding and activating CO2 molecules and provide fundamental knowledge for the design of new CO2RR catalysts.

Highly Efficient Carbon Dioxide Electroreduction via DNA-Directed Catalyst Immobilization

Electrochemical reduction of carbon dioxide (CO2) is a promising route to up-convert this industrial byproduct. However, to perform this reaction with a small-molecule catalyst, the catalyst must be proximal to an electrode surface. Efforts to immobilize molecular catalysts on electrodes have been stymied by the need to optimize the immobilization chemistries on a case-by-case basis. Taking inspiration from nature, we applied DNA as a molecular-scale "Velcro" to investigate the tethering of three porphyrin-based catalysts to electrodes. This tethering strategy improved both the stability of the catalysts and their Faradaic efficiencies (FEs). DNA-catalyst conjugates were immobilized on screen-printed carbon and carbon paper electrodes via DNA hybridization with nearly 100% efficiency. Following immobilization, a higher catalyst stability at relevant potentials is observed. Additionally, lower overpotentials are required for the generation of carbon monoxide (CO). Finally, high FE for CO generation was observed with the DNA-immobilized catalysts as compared to the unmodified small-molecule systems, as high as 79.1% FE for CO at -0.95 V vs SHE using a DNA-tethered catalyst. This work demonstrates the potential of DNA "Velcro" as a powerful strategy for catalyst immobilization. Here, we demonstrated improved catalytic characteristics of molecular catalysts for CO2 valorization, but this strategy is anticipated to be generalizable to any reaction that proceeds in aqueous solutions.

Pillar-Layered Porous Metal-Organic Frameworks with Co2N2O8 Clusters and Tetragonal Ligands for CO2 Conversion

Converting CO2 to valuable chemicals and fuels is a viable method to establish a carbon-neutral energy cycle in the environment. Metal-organic frameworks (MOFs), characterized by dispersed active sites, high porosity, etc., have displayed a great application prospect in the electrochemical/chemical CO2 reduction reaction (CO2RR) process. Herein, we proposed a one-step production to establish a series of pillar-layered porous MOFs, [Co2(L)(bimb)]n (MOF 1) and [Co4(L)2(bidpe)2]n (MOF 2) [H4L = 5'-(4-carboxyphenyl)-(1,1':2',1″-terphenyl)-4,4',4″-tricarboxylic, bimb = 1,4-bis(imidazol-1-yl)-butane, bidpe = 4'-bis(imidazolyl) diphenyl ether], for preferential conversion of CO2 via ligand adjustment and increase of active sites' density. According to single-crystal X-ray diffraction studies, [Co2(L)(bimb)]n exhibits pillar-layered binuclear 3D frameworks with a 2,4,6-linked 3-nodes new topology structure, while [Co4(L)2(bidpe)2]n displays pillar-layered tetranuclear interspersed networks with a 4,6-linked 2-nodes fsc topology structure through a ligand adjustment strategy. Meanwhile, the pillar-layered structure of the MOFs with abundant active sites is conducive to mass diffusion and benefits the conversion of CO2. MOFs 1-2 exhibit good electrocatalytic activity for CO2RR in 0.5 M KHCO3 solution. Especially, the current density of MOF 2 generated at -0.90 V (vs. RHE) reaches -81.6 mA·cm-2, which is 3.1 times higher than that under an Ar atmosphere. In addition, MOFs 1-2 can be used as a heterogeneous catalyst for chemical conversion of CO2. The results are expected to provide inspiration for rational design to develop stable and high-efficiency MOF-based electrocatalysts for CO2RR.

Temperature-Controlled Syngas Production via Electrochemical CO2 Reduction on a CoTPP/MWCNT Composite in a Flow Cell

The mixture of CO and H₂, known as syngas, is a building block for many substantial chemicals and fuels. Electrochemical reduction of CO₂ and H₂O to syngas would be a promising alternative approach for its synthesis due to negative carbon emission footprint when using renewable energy to power the reaction. Herein, we present temperature-controlled syngas production by electrochemical CO₂ and H₂O reduction on a cobalt tetraphenylporphyrin/multiwalled carbon nanotube (CoTPP/MWCNT) composite in a flow cell in the temperature range of 20-50 °C. The experimental results show that for all the applied potentials the ratio of H₂/CO increases with increasing temperature. Interestingly, at -0.6 V _RHE and 40 °C, the H₂/CO ratio reaches a value of 1.2 which is essential for the synthesis of oxo-alcohols. In addition, at -1.0 V _RHE and 20 °C, the composite shows very high selectivity toward CO formation, reaching a Faradaic efficiency of ca. 98%. This high selectivity of CO formation is investigated by density functional theory modeling which underlines that the potential-induced oxidation states of the CoTPP catalyst play a vital role in the high selectivity of CO production. Furthermore, the stability of the formed intermediate species is evaluated in terms of the pK_a value for further reactions. These experimental and theoretical findings would provide an alternative way for syngas production and help us to understand the mechanism of molecular catalysts in dynamic conditions.

Atomically Thin, Ionic-Covalent Organic Nanosheets for Stable, High-Performance Carbon Dioxide Electroreduction

The incorporation of charged functional groups is effective to modulate the activity of molecular complexes for the CO₂ reduction reaction (CO₂ RR), yet long-term heterogeneous electrolysis is often hampered by catalyst leaching. Herein, an electrocatalyst of atomically thin, cobalt-porphyrin-based, ionic-covalent organic nanosheets (CoTAP-iCONs) is synthesized via a post-synthetic modification strategy for high-performance CO₂ -to-CO conversion. The cationic quaternary ammonium groups not only enable the formation of monolayer nanosheets due to steric hindrance and electrostatic repulsion, but also facilitate the formation of a *COOH intermediate, as suggested by theoretical calculations. Consequently, CoTAP-iCONs exhibit higher CO₂ RR activity than other cobalt-porphyrin-based structures: an 870% and 480% improvement of CO current densities compared to the monomer and neutral nanosheets, respectively. Additionally, the iCONs structure can accommodate the cationic moieties. In a flow cell, CoTAP-iCONs attain a very small onset overpotential of 40 mV and a stable total current density of 212 mA cm^-2 with CO Faradaic efficiency of >95% at -0.6 V for 11 h. Further coupling the flow electrolyzer with commercial solar cells yields a solar-to-CO conversion efficiency of 13.89%. This work indicates that atom-thin, ionic nanosheets represent a promising structure for achieving both tailored activity and high stability.

Exploring the Electrochemistry of Iron Dithiolene and Its Potential for Electrochemical Homogeneous Carbon Dioxide Reduction

In this work, the dithiolene complex iron(III) bis‐maleonitriledithiolene [Fe(mnt)₂] is characterised and evaluated as a homogeneous CO₂ reduction catalyst. Electrochemically the Fe(mnt)₂ is reduced twice to the trianionic Fe(mnt)₂³⁻ state, which is correspondingly found to be active towards CO₂. Interestingly, the first reduction event appears to comprise overlapping reversible couples, attributed to the presence of both a dimeric and monomeric form of the dithiolene complex. In acetonitrile Fe(mnt)₂ demonstrates a catalytic response to CO₂ yielding typical two‐electron reduction products: H₂, CO and CHOOH. The product distribution and yield were governed by the proton source. Operating with H₂O as the proton source gave only H₂ and CO as products, whereas using 2,2,2‐trifluoroethanol gave 38 % CHOOH faradaic efficiency with H₂ and CO as minor products.

Electroreduction of CO2 toward High Current Density

Carbon dioxide (CO2) electroreduction offers an attractive pathway for converting CO2 to valuable fuels and chemicals. Despite the existence of some excellent electrocatalysts with superior selectivity for specific products, these reactions are conducted at low current densities ranging from several mA cm−2 to tens of mA cm−2, which are far from commercially desirable values. To extend the applications of CO2 electroreduction technology to an industrial scale, long-term operations under high current densities (over 200 mA cm−2) are desirable. In this paper, we review recent major advances toward higher current density in CO2 reduction, including: (1) innovations in electrocatalysts (engineering the morphology, modulating the electronic structure, increasing the active sites, etc.); (2) the design of electrolyzers (membrane electrode assemblies, flow cells, microchannel reactors, high-pressure cells, etc.); and (3) the influence of electrolytes (concentration, pH, anion and cation effects). Finally, we discuss the current challenges and perspectives for future development toward high current densities.

Atomic- and Molecular-Level Modulation of Dispersed Active Sites for Electrocatalytic CO2 Reduction

Global climate changes have been impacted by the excessive CO 2 emission, which exacerbates the environmental problems. Electrochemical CO 2 reduction (CO 2 RR) offers the solution for utilizing CO 2 as feedstocks for value-added products while potentially mitigating the negative effects. Owing to the extreme stability of CO 2 , selectivity and efficiency are crucial factors in the development of CO 2 RR electrocatalysts. Recently, single-atom catalysts have emerged as potential electrocatalysts for CO 2 reduction. They generally comprise of atomically- and molecularly dispersed active sites over conductive supports, which enable atomic-level and molecular-level modulations. In this minireview, catalyst preparations, principle of modulations, and reaction mechanisms are summarised together with related recent advances. The atomic-level modulations are first discussed, followed by the molecular-level modulations. Finally, the current challenges and future opportunities are provided as guidance for further developments regarding the discussed topics.

Recent Progress in (Photo-)-Electrochemical Conversion of CO2 With Metal Porphyrinoid-Systems

Since decades, the global community has been facing an environmental crisis, resulting in the need to switch from outdated to new, more efficient energy sources and a more effective way of tackling the rising carbon dioxide emissions. The activation of small molecules such as O₂, H⁺, and CO₂ in a cost—and energy-efficient way has become one of the key topics of catalysis research. The main issue concerning the activation of these molecules is the kinetic barrier that has to be overcome in order for the catalyzed reaction to take place. Nature has already provided many pathways in which small molecules are being activated and changed into compounds with higher energy levels. One of the most famous examples would be photosynthesis in which CO₂ is transformed into glucose and O₂ through sunlight, thus turning solar energy into chemical energy. For these transformations nature mostly uses enzymes that function as catalysts among which porphyrin and porphyrin-like structures can be found. Therefore, the research focus lies on the design of novel porphyrinoid systems (e.g. corroles, porphyrins and phthalocyanines) whose metal complexes can be used for the direct electrocatalytic reduction of CO₂ to valuable chemicals like carbon monoxide, formate, methanol, ethanol, methane, ethylene, or acetate. For example the cobalt(III)triphenylphosphine corrole complex has been used as a catalyst for the electroreduction of CO₂ to ethanol and methanol. The overall goal and emphasis of this research area is to develop a method for industrial use, raising the question of whether and how to incorporate the catalyst onto supportive materials. Graphene oxide, multi-walled carbon nanotubes, carbon black, and activated carbon, to name a few examples, have become researched options. These materials also have a beneficial effect on the catalysis through for instance preventing rival reactions such as the Hydrogen Evolution Reaction (HER) during CO₂ reduction. It is very apparent that the topic of small molecule activation offers many solutions for our current energy as well as environmental crises and is becoming a thoroughly investigated research objective. This review article aims to give an overview over recently gained knowledge and should provide a glimpse into upcoming challenges relating to this subject matter.

Can N, S Cocoordination Promote Single Atom Catalyst Performance in CO2 RR? Fe-N2 S2 Porphyrin versus Fe-N4 Porphyrin

Single atom catalysts (SACs) are promising electrocatalysts for CO₂ reduction reaction (CO₂ RR), in which the coordination environment plays a crucial role in intrinsic catalytic activity. Taking the regular Fe porphyrin (Fe-N₄ porphyrin) as a probe, the study reveals that the introduction of opposable S atoms into N coordination (Fe-N₂ S₂ porphyrin) allows for an appropriate electronic structural optimization on active sites. Owing to the additional orbitals around the Fermi level and the abundant Fe dz2 orbital occupation after S substitution, N, S cocoordination can effectively tune SACs and thus facilitating protonation of intermediates during CO₂ RR. CO₂ RR mechanisms lead to possible C1 products via two-, six-, and eight-electron pathways are systematically elucidated on Fe-N₄ porphyrin and Fe-N₂ S₂ porphyrin. Fe-N₄ porphyrin yields the most favorable product of HCOOH with a limiting potential of -0.70 V. Fe-N₂ S₂ porphyrin exhibits low limiting potentials of -0.38 and -0.40 V for HCOOH and CH₃ OH, respectively, surpassing those of most Cu-based catalysts and SACs. Hence, the N, S cocoordination might provide better catalytic environment than regular N coordination for SACs in CO₂ RR. This work demonstrates Fe-N₂ S₂ porphyrin as a high-performance CO₂ RR catalyst, and highlights N, S cocoordination regulation as an effective approach to fine tune high atomically dispersed electrocatalysts.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Research Progress in Organic Synthesis by Means of Photoelectrocatalysis

The rapid development of radical chemistry has spurred several innovative strategies for organic synthesis. The novel approaches for organic synthesis play a critical role in promoting and regulating the single-electron redox activity. Among them, photoelectrocatalysis (PEC) has attained considerable attention as the most promising strategy to convert organic compounds into fine chemicals. This review highlights the current progress in organic synthesis through PEC, including various catalytic reactions, catalyst systems and practical applications. The numerous catalytic reactions suffer the high overpotential and poor conversion efficiency, depending on the design of electrolyzers and the reaction mechanisms. We also considered the recent developments with special emphasis on scientific problems and efficient solutions, which enhance accessibility to utilize and further develop the photoelectrocatalytic technology for the specific chemical bonds formation and the fabrication of numerous catalytic systems.

Recent Developments in Metalloporphyrin Electrocatalysts for Reduction of Small Molecules: Strategies for Managing Electron and Proton Transfer Reactions

Porphyrins are archetypal ligands in inorganic chemistry. The last 10 years have seen important new advances in the use of metalloporphyrins as catalysts in the activation and reduction of small molecules, in particular O₂ and CO₂ . Recent developments of new molecular designs, scaling relationships, and theoretical modeling of mechanisms have rapidly advanced the utility of porphyrins as electrocatalysts. This Minireview focuses on the summary and evaluation of recent developments of metalloporphyrin O₂ and CO₂ reduction electrocatalysts, with an emphasis on contrasting homogeneous and heterogeneous electrocatalysis. Comparisons for proposed reaction mechanisms are provided for both CO₂ and O₂ reduction, and ideas are proposed about how lessons from the last decade of research can lead to the development of practical, applied porphyrin-derived catalysts.

Active Role of the Buffer in the Proton-Coupled Electron Transfer of Immobilized Iron Porphyrins

Evaluation of the proton-coupled electron transfer thermodynamics of immobilized hemin is challenging due to the disparity of its electrochemical titration curves reported in the literature. Deviations from the one-electron, one-proton transfer at circumneutral pHs have been commonly ascribed to either the formation of dimeric species or the ionization of a second iron-bound water molecule. Herein, however, we report on non-idealities in the more acidic region, whose onset and extent vary with the nature and concentration of the commonly used phosphate and acetate buffers. It is shown that these deviations originate in the ligand-exchange binding between the oxidized aquo-hemin complex and the anionic components of the buffer, so that they are restricted to the pH interval where these forms coexist. A stepwise approach was developed to quantify unambiguously the apparent and intrinsic binding equilibrium constants. The apparent binding equilibrium constant exhibits a peak-shaped pH dependence, whose maximum is located at approximately the midpoint between the pK_a of the iron-bound water and the first pK_a of the buffer, and its magnitude is greater for the phosphate than for the acetate buffer. But strikingly, the opposite trend was found for the magnitude of the intrinsic binding equilibrium constants determined from the apparent ones, due to the different relative locations of the phosphoric and acetic pK_a values with respect to that of the oxidized aquo-hemin. To probe the role of the heme propionic residues, a similar study was carried out with a propionic-free iron porphyrin containing eight ethyl residues. These substituents decrease the acidity of the iron-bound water, strengthen the iron(III)-acetate binding, weaken the iron(III)-dihydrogen phosphate binding, and enable the binding between iron(III) and monohydrogen phosphate, which was hampered in hemin by the presence of the negatively charged propionate residues. Overall, this work provides a more complete speciation of immobilized iron porphyrins under acidic conditions than previously considered, showing the substitutional lability of the aqua ligand in the oxidized state of the iron center and the reluctance of its hydroxyl counterpart to anion exchange. Knowledge of these redox- and pH-dependent bindings with the buffer components is crucial for a rigorous quantification of the proton-coupled electron transfer and the electrocatalytic activity of iron porphyrins.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Homogeneous and heterogeneous molecular catalysts for electrochemical reduction of carbon dioxide

Carbon dioxide (CO2) is a greenhouse gas whose presence in the atmosphere significantly contributes to climate change. Developing sustainable, cost-effective pathways to convert CO2 into higher value chemicals is essential to curb its atmospheric presence. Electrochemical CO2 reduction to value-added chemicals using molecular catalysis currently attracts a lot of attention, since it provides an efficient and promising way to increase CO2 utilization. Introducing amino groups as substituents to molecular catalysts is a promising approach towards improving capture and reduction of CO2. This review explores recently developed state-of-the-art molecular catalysts with a focus on heterogeneous and homogeneous amine molecular catalysts for electroreduction of CO2. The relationship between the structural properties of the molecular catalysts and CO2 electroreduction will be highlighted in this review. We will also discuss recent advances in the heterogeneous field by examining different immobilization techniques and their relation with molecular structure and conductive effects.

Vitamin B12 on Graphene for Highly Efficient CO2 Electroreduction

Combining the advantages of homogeneous and heterogeneous catalytic systems has emerged as a promising strategy for electrochemical CO₂ reduction although developing robust, active, product-selective, and easily available, catalysts remains a major challenge. Herein, we report the electroreduction of CO₂ catalyzed by cobalt and benzimidazole containing Vitamin B₁₂ immobilized on the surface of reduced graphene oxide (rGO). This hybrid system with a naturally abundant molecular catalyst produces CO with high selectivity and a constant current density in an aqueous buffer solution (pH 7.2) for over 10 h. A Faradaic efficiency (FE) of 94.5% was obtained for converting CO₂ to CO at an overpotential of 690 mV with a CO partial current density (j_CO) of 6.24 mA cm^-2 and a turnover frequency (TOF) of up to 28.6 s^-1. A higher j_CO (13.6 mA cm^-2) and TOF (52.4 s^-1) can be achieved with this system at a higher overpotential (790 mV) without affecting the product selectivity (∼94%) for CO formation. Our experimental findings are corroborated with density functional theory (DFT) studies to understand the influence of the covalently attached and redox-active benzimidazole unit. To the best of our knowledge, this is the first example of naturally abundant vitamin being immobilized on a conductive surface for highly efficient CO₂ electroreduction.

Carbon Dioxide Reduction Mediated by Iron Catalysts: Mechanism and Intermediates That Guide Selectivity

The reduction of carbon dioxide represents an ambitious target, with potential impact on several of the United Nations' sustainable development goals including climate action, renewable energy, sustainable cities, and communities. This process shares a common issue with other redox reactions involved in energy-related schemes (i.e., proton reduction to hydrogen and water oxidation to oxygen), that is, the need for a catalyst in order to proceed at sustainable rates. Moreover, the reduction of CO₂ faces an additional selectivity complication, since several products can be formed, including carbon monoxide, formic acid/formate, methanol, and methane. In this Mini-Review, we will discuss iron-based molecular catalysts that catalyze the reduction of CO₂, focusing in particular on the selectivity of the processes, which is rationalized and guided on the basis of the reaction mechanism. Inspired by the active sites of carbon monoxide dehydrogenases, several synthetic systems have been proposed for the reduction of CO₂; these are discussed in terms of key intermediates such as iron hydrides or Fe-CO₂ adducts, where the ligand coordination motif, together with the presence of co-additives such as Brønsted acids, nucleophiles, or CO₂ trapping moieties, can guide the selectivity of the reaction. A mechanistic comparison is traced with heterogeneous iron single-atom catalysts. Perspectives on the use of molecular catalysts in devices for sustainable reduction of CO₂ are finally given.

Efficient Carbon Dioxide Electroreduction over Ultrathin Covalent Organic Framework Nanolayers with Isolated Cobalt Porphyrin Units

Electrochemical CO₂ reduction represents a sustainable approach for the conversion of CO₂ into valuable fuels and chemicals. Here, we fabricated a series of composite nanomaterials through template-oriented polymerization of covalent organic frameworks (COFs) with isolated cobalt porphyrin units on amino-functionalized carbon nanotubes for efficient electrocatalytic CO₂ reduction reaction (CO₂RR). Compared with pure COFs, the hybrid form of ultrathin COF nanolayers wrapped on the conductive scaffold leads to distended current density and stable Faradaic efficiency for CO₂-to-CO conversion over a wide potential range. Specifically, the catalytic performances of the system can be finely optimized by the modification of the reticular structure with different functional groups. Our work gives a new strategy for the preparation of highly active and selective electrocatalysts for CO₂RR.

Molecular catalysis of CO2 reduction: recent advances and perspectives in electrochemical and light-driven processes with selected Fe, Ni and Co aza macrocyclic and polypyridine complexes

Earth-abundant Fe, Ni, and Co aza macrocyclic and polypyridine complexes have been thoroughly investigated for CO2 electrochemical and visible-light-driven reduction. Since the first reports in the 1970s, an enormous body of work has been accumulated regarding the two-electron two-proton reduction of the gas, along with mechanistic and spectroscopic efforts to rationalize the reactivity and establish guidelines for structure-reactivity relationships. The ability to fine tune the ligand structure and the almost unlimited possibilities of designing new complexes have led to highly selective and efficient catalysts. Recent efforts toward developing hybrid systems upon combining molecular catalysts with conductive or semi-conductive materials have converged to high catalytic performances in water solutions, to the inclusion of these catalysts into CO2 electrolyzers and photo-electrochemical devices, and to the discovery of catalytic pathways beyond two electrons. Combined with the continuous mechanistic efforts and new developments for in situ and in operando spectroscopic studies, molecular catalysis of CO2 reduction remains a highly creative approach.

Organic-Inorganic Hybrid Nanomaterials for Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction (ECR) to value-added chemicals and fuels is regarded as an effective strategy to mitigate climate change caused by CO₂ from excess consumption of fossil fuels. To achieve CO₂ conversion with high faradaic efficiency, low overpotential, and excellent product selectivity, rational design and synthesis of efficient electrocatalysts is of significant importance, which dominates the development of ECR field. Individual organic molecules or inorganic catalysts have encountered a bottleneck in performance improvement owing to their intrinsic shortcomings. Very recently, organic-inorganic hybrid nanomaterials as electrocatalysts have exhibited high performance and interesting reaction processes for ECR due to the integration of the advantages of both heterogeneous and homogeneous catalytic processes, attracting widespread interest. In this work, the recent advances in designing various organic-inorganic hybrid nanomaterials at the atomic and molecular level for ECR are systematically summarized. Particularly, the reaction mechanism and structure-performance relationship of organic-inorganic hybrid nanomaterials toward ECR are discussed in detail. Finally, the challenges and opportunities toward controlled synthesis of advanced electrocatalysts are proposed for paving the development of the ECR field.