Materials and Mechanisms of Photo-Assisted Chemical Reactions under Light and Dark Conditions: Can Day-Night Photocatalysis Be Achieved?

Persistent production of multiple active species with copper doped zinc gallate nanoparticles for light-independent photocatalytic degradation of organic pollutants

Photocatalysis is considered as an environmentally friendly and sustainable method as it can produce active species to degrade pollutants. However, its applications are hindered by the turbidity of pollutants and the requirements for continuous or repeated in situ irradiation. To avoid the need for continuous in situ irradiation in the photocatalytic process, herein we report the doping of Cu(II) ions into zinc gallate (ZnGa2O4) as traps to capture photo-generated electrons. In this way, long lifetime charge release and separation were effectively achieved for the persistent degradation of organic dyes in wastewater. The Cu(II) doped ZnGa2O4 (ZGC) nanoparticles with a small size about 7.7 nm synthesized via a hydrothermal method exhibited a persistent photocatalytic activity with continuous production of reactive oxygen species for at least 96 h without in situ irradiation due to its unique electronic structure and carrier transport path, and enabled to degrade 82.2 % of rhodamine B in 1 h. Further investigation revealed that the doped Cu(II) ions occupied the octahedral sites of ZGC and highly increased the persistent production and availability of active species for the persistent degradation of organic dyes under pre-illuminated conditions.

Defect-engineered dual Z-scheme core-shell MoS2/WO3-x/AgBiS2 for antibiotic and dyes degradation in photo and night catalysis: Mechanism and pathways

Water pollution caused by antibiotics and synthetic dyes and imminent energy crises due to limited fossil fuel resources are issues of contemporary decades. Herein, we address them by enabling the multifunctionality in dual Z-scheme MoS2/WO3-x/AgBiS2 across photolysis, photo Fenton-like, and night catalysis. Defect, basal, and facet-engineered WO3-x is modified with MoS2 and AgBiS2, which extended its photoresponse from the UV-NIR region, inhibited carrier recombination, and reduced carrier transfer resistance. The electric field rearrangement leads to a flow of electrons from MoS2 and AgBiS2 to WO3-x and intensifies the electron population, which is crucial for night catalysis. When MoS2/WO3-x/AgBiS2 was employed against doxycycline hydrochloride (DOXH), it removed 95.65, 81.11, and 77.92 % of DOXH in 100 min during photo-Fenton (PFR), night-Fenton (NFR), and photocatalytic (PCR) reactions, respectively. It also effectively removed 91.91, 98.17, 99.01, and 98.99 % of rhodamine B (RhB), Congo red (CR), methylene blue (MB), and methylene orange (MO) in Fenton reactions, respectively. ESR analysis consolidates the ROS generation feature of MoS2/WO3-x/AgBiS2 using H2O2 with and without irradiation. This work provides a strategy to eliminate the deficiencies of WO3-x and is conducive to the evolution of applications seeking to combat environmental and energy crises.

WO3-x nanorods/rGO/AgBiS2 Z-scheme heterojunction with comprehensive spectrum response and enhanced Fenton and photocatalytic activities

Tetracycline (TC) antibiotics and dyes are the prevalent water contaminants, and their removal from the water through photocatalysis is a plausible approach. However, most semiconductors in their pristine form need to be improved to be exploited in photocatalysis owing to poor photoresponse, intense carrier recombination, and inertness without irradiation. Herein, we demonstrate the modification of defective WO3-x by rGO and AgBiS2 in the form of WO3-x/rGO/AgBiS2 (R2). It exploits the superior conductivity and synergism of rGO to inhibit carrier recombination; thereby, Z-scheme heterojunction with AgBiS2 provides high redox potential. Defects in WO3-x enable electron (e-) storage in R2, which decomposes H2O2 to generate ROS without irradiation. Owing to these essences and broad-spectrum response, it removed 93.72, 82.77, and 84.82% of TC during photo-Fenton (PFR), night-Fenton (NFR), and photocatalytic (PCR) reactions, respectively. Its removal rates reached 94.74, 81.54, and 87.50% against rhodamine B (RhB) during PFR, NFR, and PCR, respectively. It is superior to memory catalysis (MC) and conventional Fenton reactions (CFR) because it can perform without and with irradiation across a broader pH range. So, this work is conducive to designing WO3-x-based catalysts to combat environmental and energy crises.

Nanocomposite Marvels: Unveiling Breakthroughs in Photocatalytic Water Splitting for Enhanced Hydrogen Evolution

An overview of the significant innovations in photocatalysts for H2 development, photocatalyst selection criteria, and photocatalytic modifications to improve the photocatalytic activity was examined in this Review, as well as mechanisms and thermodynamics. A variety of semiconductors have been examined in a structured fashion, such as TiO2-, g-C3N4-, graphene-, sulfide-, oxide-, nitride-, oxysulfide-, oxynitrides, and cocatalyst-based photocatalysts. The techniques for enhancing the compatibility of metals and nonmetals is discussed in order to boost photoactivity within visible light irradiation. In particular, further deliberation has been carried out on the development of heterojunctions, such as type I, type II, and type III, along with Z-systems, and S-scheme systems. It is important to thoroughly investigate these issues in the sense of visible light irradiations to enhance the efficacy of photocatalytic action. In fact, another advancement in this area may include hiring mediators including grapheme oxide and metals to establish indirect Z-scheme montages with a correct band adjustment. The potential consideration of reaction chemology, mass transfer, kinetics of reactions, restriction of light diffusion, and the process and selection of suitable light and photoreactor also will optimize sustainable hydrogen output efficiency and selectivity.

The Autocatalytic Chemical Reaction of a Soluble Biopolymer Derived from Municipal Biowaste

The paper discusses the perspectives of further implementation of the autocatalytic properties of a soluble biopolymer (SBP) derived from municipal biowastes for the realisation of a biorefinery producing value-added bio-products for consumer use. The reaction of an SBP and water is reported to cause the depolymerisation and oxidation of the pristine SBP organic matter with the formation of carboxyl-functionalised polymers having lower molecular weight and CO2. These findings demonstrate the oxidation of the SBP via water, which could only occur through the production of O and OH radicals catalysed by the SBP. According to the adopted experimental plan, the anaerobic digestate supplied by an Italian municipal biowaste treatment plant was hydrolysed in pH 13 water at 60 °C. The dry product was re-dissolved in plain water at pH 10 and used as a control against the same solution with hydrogen peroxide at 0.1-3 H2O2 moles per SBP carbon mole added. The control and test solutions were kept at room temperature, in the dark or in a climatic chamber under irradiation with simulated solar light, until the pH of the solutions remained constant. Afterwards, the solutions were processed to recover and analyse the crude soluble products. The present work reports the results obtained for the control solution and for the test solutions treated in the presence and absence of H2O2, with and without pH control, in the dark and under irradiation with simulated solar light.

MXene derived Ti3C2/TiO2/Ag persistent photocatalyst with enhanced electron storage capacity for round-the-clock degradation of organic pollutant

Persistent photocatalysis has garnered significant attention due to its ability to sustain catalytic activity in dark by storing electrons. However, the practical application of persistent photocatalysis is hindered by limited electron storage capacity. Herein, we synthesized and demonstrated that Ti3C2/TiO2/Ag persistent photocatalyst has good electron storage capability. The electron storage capacity of Ti3C2/TiO2/Ag is up to 0.125 μmol/mg, which is 2.5 times that of Ti3C2/TiO2. The enhanced electron storage capacity resulted in improved dark-reaction activity because more electrons react with oxygen to form more radicals, as evidenced by degradation experiments of various organics. Especially, persistent photocatalytic degradation of tetracycline hydrochloride by Ti3C2/TiO2/Ag was achieved under natural outdoor conditions (from 2:00p.m. to 8:00p.m.). Additionally, the aid of oxidants such as peroxymonosulfate (PMS) can further improve the dark-reaction activity. TiO2/Ti3C2/Ag/PMS system exhibits excellent efficacy in removing tetracycline hydrochloride, oxytetracycline, rhodamine b, methyl orange, and methylene blue, with removal rates reaching 79.5 %, 81.4 %, 98.9 %, 99.1 %, and 99.2 %, respectively (15 min of light-reaction and 45 min of dark-reaction). This work provides a new strategy to enhance electron storage capacity and demonstrates that decoupling of light-reaction and dark-reaction may provide a new opportunity for photocatalytic removal of pollutants around the clock.

Exploration of long afterglow luminescent materials composited with graphitized carbon nitride for photocatalytic degradation of basic fuchsin

The frequent exposure of the widely used dye, basic fuchsin (BF), is seriously threatening the health of human central nervous system. Thus, removing the environmental pollution caused by BF is crucial, and photocatalytic technology recently has been used to degrade the pollutions dye. In this study, the binary composite SrAl₂O₄:Eu²⁺, Dy³⁺/g-C₃N₄ was prepared by high-temperature calcination and then applied in BF photodegradation. The results confirmed that the composite material had lower band gap value (Eg) and stronger visible light absorption ability. The photocatalytic capacity of the new composite materials was enhanced compared to that of the non-composite materials. By using the new binary-composited materials, 80% of BF could be degraded in 10 min, and the degradation ratio reached 100% in 30 min. More importantly, even the light source was removed, the photocatalytic reaction could continue due to the luminescence of SrAl₂O₄:Eu²⁺, Dy³⁺, and the degradation efficiency of BF could finally reach more than 90% within 3 h. By quenching experiments and electron spin resonance (ESR) spectra analysis, superoxide anion (·O₂^-) was verified to be the main active substance in this reaction process. Moreover, the excellent stability and recyclability of this catalyst was also proved. Furthermore, the new composite materials were utilized to degrade the BF aqueous solution and actual lake water, and the total organic matter contents (TOC) were measured. TOC values in these two systems decreased after photocatalytic reaction, which indicated that this catalyst has a great development prospect in the removal of organic matter in water. Our study confirmed a new kind of material of high performance with great significance for emergency treatment of water pollution in practical applications.

Integrated full-scale solar CPC/UV-LED–filtration system as a tertiary treatment in a conventional WWTP for agricultural reuse purposes

Today, the emergence of increasingly restrictive treatment and reuse policies make the implementation of full-scale tertiary treatment, capable of improving the quality of water, a priority. Full-scale TiO2 photocatalysis systems are resulting in a promising option, since TiO2 is commercially available. However, questions such as how to work continuously during day/night irradiation cycle, or the removing of TiO2 in outlet flow are still unresolved. In this work, a full-scale system integrating a solar CPC/UV-LED step combined with commercial microfiltration membranes was installed in a conventional WWTP for agricultural reuse purposes. After optimization, 0.5 g/L of catalyst and combined SOLAR + UV-LED showing the highest pharmaceutical removal percentages, while a self-designed UV-LED included in the own reaction tank resulting in higher efficiencies compared with commercial lamps. Longer membrane surface area decreased fouling problems in the system. However, 60 min of irradiation time was necessary to reach the most restrictive water quality values according with (EU 2020/741). After optimization step, total costs were reduced by 45%. However, it was shown that a reduction in operating and maintenance costs, along with the development of more effective and economical commercial filtration membranes is a key factor; therefore, working on these aspects is essential in the treated water cost reduction.

Graphical abstract

Photoelectrochemical energy storage materials: design principles and functional devices towards direct solar to electrochemical energy storage

Advanced solar energy utilization technologies have been booming for carbon-neutral and renewable society development. Photovoltaic cells now hold the highest potential for widespread sustainable electricity production and photo(electro)catalytic cells could supply various chemicals. However, both of them require the connection of energy storage devices or matter to compensate for intermittent sunlight, suffering from complicated structures and external energy loss. Newly developed photoelectrochemical energy storage (PES) devices can effectively convert and store solar energy in one two-electrode battery, simplifying the configuration and decreasing the external energy loss. Based on PES materials, the PES devices could realize direct solar-to-electrochemical energy storage, which is fundamentally different from photo(electro)catalytic cells (solar-to-chemical energy conversion) and photovoltaic cells (solar-to-electricity energy conversion). This review summarizes a critically selected overview of advanced PES materials, the key to direct solar to electrochemical energy storage technology, with the focus on the research progress in PES processes and design principles. Based on the specific discussions of the performance metrics, the bottlenecks of PES devices, including low efficiency and deteriorative stability, are also discussed. Finally, several perspectives of potential strategies to overcome the bottlenecks and realize practical photoelectrochemical energy storage devices are presented.

A photosensitizer-polyoxometalate dyad that enables the decoupling of light and dark reactions for delayed on-demand solar hydrogen production

Decoupling the production of solar hydrogen from the diurnal cycle is a key challenge in solar energy conversion, the success of which could lead to sustainable energy schemes capable of delivering H₂ independent of the time of day. Here, we report a fully integrated photochemical molecular dyad composed of a ruthenium-complex photosensitizer covalently linked to a Dawson polyoxometalate that acts as an electron-storage site and hydrogen-evolving catalyst. Visible-light irradiation of the system in solution leads to charge separation and electron storage on the polyoxometalate, effectively resulting in a liquid fuel. In contrast to related, earlier dyads, this system enables the harvesting, storage and delayed release of solar energy. On-demand hydrogen release is possible by adding a proton donor to the dyad solution. The system is a minimal molecular model for artificial photosynthesis and enables the spatial and temporal separation of light absorption, fuel storage and hydrogen release.

TiO2 nanoparticles decorated with Co-Schiff base-g-C3N4 as an efficient photocatalyst for one-pot visible light-assisted synthesis of benzimidazoles

In this study, a novel heterogeneous visible light-driven nanocatalyst was produced via the complexation of Co(ii) with g-C₃N₄-imine-functionalized TiO₂ nanoparticles. It was characterized using different techniques such as Fourier-transform infrared (FT-IR), energy-dispersive X-ray spectrum (EDS), inductively coupled plasma atomic emission spectroscopy (ICP-AES), thermogravimetric analysis (TGA), ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The catalyst promoted several different transformations in a one-pot reaction sequence: aerobic photooxidation of benzylic alcohols to aldehydes and then the tandem synthesis of benzimidazoles through the dehydrogenative coupling of primary benzylic alcohols and aromatic diamines. The photocatalyst proved to be highly active, robust, selective, and recyclable under organic reaction conditions and provided affordable products with good to high yields. The results proposed that the improved photoactivity predominantly benefits from the synergistic effects of the heterojunction of Co-carbon nitride on TiO₂ nanoparticles. Moreover, this protocol provides standard conditions avoiding undesirable additives and limitations of oxidation methods, and may help to develop a new strategy for the development of photocatalysis based organic transformations.

The Co-g-C₃N₄-imine/TiO₂ nanohybrid promotes different transformations in a one-pot reaction sequence: aerobic photooxidation of benzylic alcohols to aldehydes, and then the tandem synthesis of benzimidazoles.

Linker Engineering in Metal-Organic Frameworks for Dark Photocatalysis

Dark reactions featuring continuous activity under light off conditions play a critical role in natural photosynthesis. However, most artificial photocatalysts are inactive upon the removal of the light source, and the artificial photocatalysts with dark photocatalysis abilities have been rarely explored. Herein, we report a Ti-based metal–organic framework (MOF), MIL-125, exhibiting the capability of dark photocatalytic hydrogen production. Remarkably, the introduction of different functional groups onto the linkers enables distinctly different activities of the resulting MOFs (MIL-125-X, X = NH₂, NO₂, Br). Dynamic and thermodynamic investigations indicate that the production and lifetime of the Ti³⁺ intermediate are the key factors, due to the electron-donating/-withdrawing effect of the functional groups. As far as we know, this is the first report on dark photocatalysis over MOFs, providing new insights into the storage of irradiation energy and demonstrating their great potential in dark photocatalysis due to the great MOF diversity.

A Ti-based MOF with long-lived Ti³⁺ can achieve dark photocatalysis. The different groups on the organic linker modulate electron storage ability and the lifetime of Ti³⁺, significantly regulating dark photocatalytic activity in H₂ production.

Continuous photocatalysis via photo-charging and dark-discharging for sustainable environmental remediation: Performance, mechanism, and influencing factors

Continuous photocatalysis via photo-charging and dark-discharging presents a paradigm shift in conventional photocatalysis with the requirement of continuous illumination to maintain the catalytic activity. This is expected to meet the ever-increasing demand for sustainable development of energy and environment driven by natural day-night cycles. Substantial advances in continuous photocatalysis for various environmental applications under light-dark cycles have been witnessed during the last decade. However, there lacks a systematic and critical review on basic but important information of continuous photocatalysis for environmental remediation, challenging robust scientific progress of this technology towards potential practical use. Here, the general description of continuous photocatalysis involving energy storage mechanisms (hole and electron storage) and characterizations (electron storage behaviors, release behaviors and storage capacity) has been first introduced. Importantly, the remediation performance and mechanism of continuous photocatalysis for environmental applications are qualitatively and quantitatively demonstrated, including chemical pollutant oxidation and reduction, microbial pathogen inactivation, and multifunctional treatment. In addition, key factors influencing its remediation performance are analyzed, for the first time, from both operational and environmental views. The ample opportunities in the field of continuous photocatalysis for sustainable environmental remediation are also pointed out, calling for more efforts to fill current knowledge gaps in the future.

Mechanism of charge accumulation of poly(heptazine imide) gel

Photo-stimuli response in materials is a fascinating feature with many potential applications. A photoresponsive gel of poly(heptazine imide), PHI, termed PHIG, exhibits photochromism, photoconductivity, and photo-induced charge accumulation, and is generated using ionic liquids and PHI. Although there are several examples of ionic liquid gels that exhibit photochromism and photoconductivity, this is the first report of an ionic liquid gel that exhibits both these properties as well as charge accumulation. We conducted experimental and theoretical investigations to understand the mechanism of the photostimulus response of PHIG, especially charge accumulation. The proposed model explains both the mechanism of charge accumulation and dark photocatalysis by PHI and provides new concepts in the field of photofunctional materials.

Photodriven Charge Accumulation and Carrier Dynamics in a Water-Soluble Carbon Nitride Photocatalyst

Charge accumulation in photoactive molecules and materials holds great promise in solar energy conversion as it allows for decoupling solar-driven charging from (dark) redox reactions. In this contribution, light-driven charge accumulation was investigated for a recently reported novel water-soluble carbon nitride [K,Na-poly(heptazine imide); K,Na-PHI] photocatalyst, which exhibits excellent activity and stability in highly selective photocatalytic oxidation of alcohols and concurrent reduction of dioxygen to H₂ O₂ under quasi-homogeneous conditions. An excellent charge storage ability of the K,Na-PHI material was demonstrated, showing an optimal density of accumulated electrons (32.2 μmol of electrons per gram) in the presence of 10 vol % MeOH as a sacrificial electron donor. The long-lived electrons accumulated under anaerobic conditions as K,Na-PHI^.- radical ions were utilized in interfacial electron transfer to O₂ or methyl viologen in a subsequent dark reaction. Ultrafast time-resolved spectroscopy was employed to reveal the kinetics of charge-carrier recombination and methanol oxidation. Geminate recombination of electrons and holes within approximately 100 ps was followed by trap-assisted recombination. The presence of methanol as a sacrificial electron donor accelerated the decay of the transient absorption signal when a static sample was used. This behavior was ascribed to the faster charge recombination in the presence of the radical anions generated after hole extraction. The work suggests that photodriven electron storage in the water-soluble carbon nitride is enabled by localized trap states, and highlights the importance of the effective electron donor for creating long-lived photo-generated carbon nitride radicals.

Transition metal oxide and chalcogenide-based nanomaterials for antibacterial activities: an overview

A new battle line is drawn where antibiotic misuse and mismanagement have made treatment of bacterial infection a thorny issue. It is highly desirable to develop active antibacterial materials for bacterial control and destruction without drug resistance. A large amount of effort has been devoted to transition metal oxide and chalcogenide (TMO&C) nanomaterials as possible candidates owing to their unconventional physiochemical, electronic and optical properties and feasibility of functional architecture assembly. This review expounds multiple TMO&C-based strategies to combat pathogens, opening up new possibilities for the design of simple, yet highly effective systems that are crucial for antimicrobial treatment. A special emphasis is placed on the multiple mechanisms of these nanoagents, including mechanical rupture, photocatalytic/photothermal activity, Fenton-type reaction, nanozyme-assisted effect, released metal ions and the synergistic action of TMO&C in combination with other antibacterial agents. The applications of TMO&C nanomaterials mostly in air/water purification and wound healing along with their bactericidal activities and mechanisms are also described. Finally, the contemporary challenges and trends in the development of TMO&C-based antibacterial strategies are proposed.

Novel Core-Sheath Cu/Cu2O-ZnO-Fe3O4 Nanocomposites with High-Efficiency Chlorine-Resistant Bacteria Sterilization and Trichloroacetic Acid Degradation Performance

In order to solve two issues of chlorine-resistant bacteria (CRB) and disinfection byproducts (DBPs) in tap water after the chlorine-containing treatment process, an innovative core-sheath nanostructured Cu/Cu₂O-ZnO-Fe₃O₄ was designed and synthesized. The fabrication mechanism of the materials was then systematically analyzed to determine the component and valence state. The properties of CRB inactivation together with trichloroacetic acid (TCAA) photodegradation by Cu/Cu₂O-ZnO-Fe₃O₄ were investigated in detail. It was found that Cu/Cu₂O-ZnO-Fe₃O₄ displayed excellent antibacterial activity with a relatively low cytotoxicity concentration due to its synergism of nanowire structure, ion release, and reactive oxygen species generation. Furthermore, the Cu/Cu₂O-ZnO-Fe₃O₄ nanocomposite also exhibited outstanding photocatalytic degradation activity on TCAA under simulated sunlight irradiation, which was verified to be dominated by the surface reaction through kinetic analysis. More interestingly, the cell growth rate of Cu/Cu₂O-ZnO-Fe₃O₄ was determined to be 50% and 10% higher than those of Cu/Cu₂O and Cu/Cu₂O-ZnO after 10 h incubation, respectively, manifesting a weaker cytotoxicity. Therefore, the designed Cu/Cu₂O-ZnO-Fe₃O₄ could be a promising agent for tap water treatment.

Emerging Hybrid Nanocomposite Photocatalysts for the Degradation of Antibiotics: Insights into Their Designs and Mechanisms

The raising occurrence of antibiotics in the global water bodies has received the emerging concern due to their potential threats of generating the antibiotic-resistive and genotoxic effects into humans and aquatic species. In this direction, the solar energy assisted photocatalytic technique offers a promising solution to address such emerging concern and paves ways for the complete degradation of antibiotics with the generation of less or non-toxic by-products. Particularly, the designing of hybrid photocatalyticcomposite materials has been found to show higher antibiotics degradation efficiencies. As the hybrid photocatalysts are found as the systems with ideal characteristic properties such as superior structural, surface and interfacial properties, they offer enhanced photoabsorbance, charge-separation, -transfer, redox properties, photostability and easy recovery. In this context, this review study presents an overview on the recent developments in the designing of various hybrid photocatalytic systems and their efficiency towards the degradation of various emerging antibiotic pharmaceutical contaminants in water environments.

Efficient day-night photocatalysis performance of 2D/2D Ti3C2/Porous g-C3N4 nanolayers composite and its application in the degradation of organic pollutants

It is hindered by the limited light time that the development of photocatalysis technology, which is a clean and energy-saving advanced oxidation process. In this work, a 2D/2D Ti₃C₂/porous g-C₃N₄ nanolayers composited van der Waals (VDW) heterostructure photocatalyst (Ti₃C₂/PCN) was prepared by a straightforward vacuum filtration method after an ultrasonic stripping process. In this Ti₃C₂/PCN composite photocatalyst, PCN nanolayers play the role of absorbing visible light, while Ti₃C₂ nanolayers form VDW heterojunction with PCN nanolayers, which is beneficial to migration of photo-generated electrons from PCN to Ti₃C₂. The band structure match of Ti₃C₂/PCN and the build-in electric field from the VDW heterojunction both favor the effective separation and migration of photo-induced charge carriers that is why the Ti₃C₂/PCN composite shows good day-photocatalytic capability with 98% phenol removal efficiency. Besides, as a good electronic storage material, the Ti₃C₂ can store excess photo-generated electrons under light irradiation and release them when exposed to electron acceptors in the dark condition. Therefore, the night-photocatalysis can work out even without sunlight, in which 32% phenol was decomposed. In addition, the universality of Ti₃C₂/PCN day-night photocatalytic system is proved by the degradation of various organic pollutants. The design of this day-night photocatalyst can facilitate the application of photocatalytic reaction to actual environmental scenes, since it reduces the limitation imposed by the presence or absence of sunlight.

Insights into the TiO2-Based Photocatalytic Systems and Their Mechanisms

Photocatalysis is a multifunctional phenomenon that can be employed for energy applications such as H2 production, CO2 reduction into fuels, and environmental applications such as pollutant degradations, antibacterial disinfection, etc. In this direction, it is not an exaggerated fact that TiO2 is blooming in the field of photocatalysis, which is largely explored for various photocatalytic applications. The deeper understanding of TiO2 photocatalysis has led to the design of new photocatalytic materials with multiple functionalities. Accordingly, this paper exclusively reviews the recent developments in the modification of TiO2 photocatalyst towards the understanding of its photocatalytic mechanisms. These modifications generally involve the physical and chemical changes in TiO2 such as anisotropic structuring and integration with other metal oxides, plasmonic materials, carbon-based materials, etc. Such modifications essentially lead to the changes in the energy structure of TiO2 that largely boosts up the photocatalytic process via enhancing the band structure alignments, visible light absorption, carrier separation, and transportation in the system. For instance, the ability to align the band structure in TiO2 makes it suitable for multiple photocatalytic processes such as degradation of various pollutants, H2 production, CO2 conversion, etc. For these reasons, TiO2 can be realized as a prototypical photocatalyst, which paves ways to develop new photocatalytic materials in the field. In this context, this review paper sheds light into the emerging trends in TiO2 in terms of its modifications towards multifunctional photocatalytic applications.

Zinc oxide/vanadium pentoxide heterostructures with enhanced day-night antibacterial activities

Low photocatalytic efficiency of visible light and fast recombination of photo-generated carriers are two challenges facing the applications of photocatalyst sterilant zinc oxide (ZnO). Meanwhile, both light and dark photocatalytic activities are important. It is of great theoretical and practical significance to construct a day-night photocatalytic antibacterial material, which is beneficial to the effective use of energy and to tackle the limitation of using photocatalytic bacteriostat. ZnO nanoflowers decorated vanadium pentoxide (V₂O₅) nanowires heterojunction (ZVH) was firstly fabricated using a facile water-bathing method. The designed ZVH structure efficiently produced abundant reactive oxygen species (ROS) in both light and darkness. It yielded 99.8% and 99.0% of antibacterial rate against S. aureus due to oxidative stress induced by ROS in light and darkness, respectively. The generation of ROS played a major role in the antibacterial activities against S. aureus under both light and dark conditions. The prepared ZVH with improved antibacterial properties provides an alternative for day-night antibacterial agents.

Carbon quantum dots and carbon layer double protected cuprous oxide for efficient visible light CO2 reduction

We designed a photocatalyst of carbon dots and carbon layer double-protected Cu₂O which exhibited excellent performance in CO₂ conversion.

pH-Controlled photocatalytic abatement of RhB by an FeWO4/BiPO4 p–n heterojunction under visible light irradiation

The novel FeWO₄/BiPO₄ heterojunction generates an inner electric field to promote electron–hole separation efficiency and is a proficient photocatalyst.

Concerted catalytic and photocatalytic degradation of organic pollutants over CuS/g-C3N4 catalysts under light and dark conditions

•

CuS/g-C₃N₄ composite catalysts were successfully fabricated.

•

The optimal mass ratio of CuS in the composite was determined.

•

Fenton-like catalytic and photocatalytic effects were combined for sewage purification.

•

The continuous degradation of organic pollutants was achieved.

Organic pollutants in industrial and agricultural sewage are a serious threat to the environment and human health. Achieving continuous photocatalytic degradation of organic pollutants under light and dark conditions would have exciting implications for practical sewage treatment. In this paper, CuS/g-C₃N₄ composite catalysts with CuS nanoparticles anchored on g-C₃N₄ sheets were successfully fabricated via a simple solvothermal reaction. The morphology, structure, optical absorption characteristics, electron–hole recombination rate, and degradation performance of the as-prepared CuS/g-C₃N₄ catalysts were investigated in detail. The results confirmed that the as-fabricated CuS/g-C₃N₄ catalysts exhibited high Fenton-like catalytic degradation efficiencies in the dark, and rapid concerted Fenton-like catalytic, direct H₂O₂ photocatalytic and CuS/g-C₃N₄ photocatalytic degradation activities under visible light. Thus, the as-fabricated CuS/g-C₃N₄ catalysts can degrade organic pollutants continuously during both day and night. These degradation properties, along with the simple catalyst fabrication process, will facilitate the practical application of this system in the continuous removal of organic pollutants.

Direct Z-Scheme Cs2O-Bi2O3-ZnO Heterostructures as Efficient Sunlight-Driven Photocatalysts

Limited light absorption, inefficient electron-hole separation, and unsuitable positions of conduction band bottom and/or valence band top are three major critical issues associated with high-efficiency photocatalytic water treatment. An attempt has been carried out here to address these issues through the synthesis of direct Z-scheme Cs₂O-Bi₂O₃-ZnO heterostructures via a facile, fast, and economic method: solution combustions synthesis. The photocatalytic performances are examined by the 4-chlorophenol degradation test under simulated sunlight irradiation. UV-vis diffuse reflectance spectroscopy analysis, electrochemical impedance test, and the observed transient photocurrent responses prove not only the significant role of Cs₂O in extending light absorption to visible and near-infrared regions but also its involvement in charge carrier separation. Radical-trapping experiments verify the direct Z-scheme approach followed by the charge carriers in heterostructured Cs₂O-Bi₂O₃-ZnO photocatalysts. The Z-scheme charge carrier pathway induced by the presence of Cs₂O has emerged as the reason behind the efficient charge carrier separation and high photocatalytic activity.

Three-dimensional layered double hydroxide membranes: fabrication technique, growth mechanism, and enhanced photocatalytic activity

Novel three-dimensional ZnAl–LDH/AAO and NiAl–LDH/AAO membranes using porous anodic aluminum oxide (AAO) templates as a substrate and an Al³⁺ source were successfully fabricated via a simple precipitant-free in situ growth technique.