Label-free Electrochemical Bisphenol A Aptasensor Based on Designing and Fabrication of a Magnetic Gold Nanocomposite

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

Risk assessment of selected pharmaceuticals on wildlife with nanomaterials based aptasensors

Pharmaceuticals have improved human and veterinary health tremendously over the years. But the implications of the presence of pharmaceuticals in the environment on terrestrial, avian, and aquatic organisms are still not fully comprehended. The bioaccumulation and biomagnifications of these chemicals through the food chain have long-term effects on the wildlife. The detection and quantification of such pharmaceutical residues in the environment is a tedious process and quicker methods are needed. Aptasensors are one such quick and reliable method for the identification of pharmaceutical residues in the wildlife. Aptasensors are a class of biosensors that work on the principles of biological recognition of elements. The aptamers are unique biological recognition elements with high specificity and affinity to various targets. Their efficiency makes them a very promising candidate for such sensitive research. In this review, the pharmaceutical threats to wildlife and their detection techniques using aptasensors have been discussed.

Application of BiNPs/MWCNTs-PDA/GC sensor to measurement of Tl (1) and Pb (II) using stripping voltammetry

Herein, simultaneous determination of Tl (1) and Pb (II) has been carried out at the surface of a modified glassy carbon electrode with polydopamine functionalized multi-walled carbon nanotubes- BiNPs nanocomposite (BiNPs/MWCNTs-PDA/GC) using square-wave anodic stripping voltammetry (SWASV) technique. The morphologies, composition and, electrochemical properties of the BiNPs/MWCNTs-PDA/GC were characterized by scanning electron microscopy (SEM), transition electron microscopy (TEM), X-ray energy dispersive spectroscopy (EDX), electrochemical impedance spectroscopy (EIS) and, SWASV. The parameters affecting the stripping current response were investigated and optimized. The large specific area of MWCNTs and good electro-conductibility of BiNPs causes the BiNPs/MWCNTs-PDA/GC electrode to exhibit an excellent electro-catalytic effect with good separation peaks for Tl and Pb oxidation compared to bare GCE under the optimal conditions. The proposed sensor showed wide leaner ranges from 0.4-100 ppb and 100-400 ppb for Tl (I) and Pb (II). Low detection limits of 0.04 ppb for Tl (I) and 0.07 ppb for Pb (II) were achieved. The efficiency of the electrode after thirty days of storage in ambient conditions without using it and also with the ability to reuse for 16 days did not decrease significantly. In addition, the modified electrode with simple preparation method showed good reproducibility, and high selectivity for measuring target ions. The method was successfully implemented for the simultaneous determination of Tl (I) and Pb (II) in tap, mineral and waste water samples with acceptable recovery (from 99.1-103.2 for Tl (I) and 98.4-100.4 for Pb (II)).

Recent Advantages of Mediator Based Chemically Modified Electrodes; Powerful Approach in Electroanalytical Chemistry

Background:

Modified electrodes have advanced from the initial studies aimed at understanding electron transfer in films to applications in areas such as energy production and analytical chemistry. This review emphasizes the major classes of modified electrodes with mediators that are being explored for improving analytical methodology. Chemically modified electrodes (CMEs) have been widely used to counter the problems of poor sensitivity and selectivity faced in bare electrodes. We have briefly reviewed the organometallic and organic mediators that have been extensively employed to engineer adapted electrode surfaces for the detection of different compounds. Also, the characteristics of the materials that improve the electrocatalytic activity of the modified surfaces are discussed.

Objective:

Improvement and promotion of pragmatic CMEs have generated a diversity of novel and probable strong detection prospects for electroanalysis. While the capability of handling the chemical nature of the electrode/solution interface accurately and creatively increases , it is predictable that different mediators-based CMEs could be developed with electrocatalytic activity and completely new applications be advanced.

Properties and Recent Advantages of N,N’-dialkylimidazolium-ion Liquids Application in Electrochemistry

:

N,Nʹ-dialkylimidazolium-ion liquids is one of the important ionic liquids with a wide range of application as conductive electrolyte and in electrochemistry. The modified electrodes create a new view in fabrication of electroanalytical sensors. Many modifiers have beeen suggested for modification of electroanalytical sensor since many years ago. Over these years, ionic liquids and especially room temperature ionic liquids have attracted more attention due to their wide range of electrochemical windows and high electrical conductivity. N,Nʹ-dialkylimidazolium-ion liquids are one of the main important ionic liquids suggested for modification of bare electrodes and especially carbon paste electrodes. Although many review articles have reported onthe use of ionic liquids in electrochemical sensors, no review article has been specifically introduced so far on the review of the advantages of N,Nʹ-dialkylimidazolium ionic liquid. Therefore, in this review paper we focused on the introduction of recent advantages of N,Nʹ-dialkyl imidazolium ionic liquid in electrochemistry.

Aptamer-based assays: strategies in the use of aptamers conjugated to magnetic micro- and nanobeads as recognition elements in food control

An outlook on the current status of different strategies for magnetic micro- and nanosized bead functionalization with aptamers as prominent bioreceptors is given with a focus on electrochemical and optical apta-assays, as well as on aptamer-modified magnetic bead–based miniaturized extraction techniques in food control. Critical aspects that affect interaction of aptamers with target molecules, as well as the possible side effects caused by aptamer interaction with other molecules due to non-specific binding, are discussed. Challenges concerning the real potential and limitations of aptamers as bioreceptors when facing analytical problems in food control are addressed.

Tailoring spatial structure of electroactive biofilm for enhanced activity and direct electron transfer on iron phthalocyanine modified anode in microbial fuel cells

Electroactive biofilm (EAB) has been considered as the core determining electricity generation in microbial fuel cells (MFCs), and its spatial structure regulation for enhanced activity and selectivity is of great concern. In this study, iron phthalocyanine (FePc) was introduced into a carbon cloth (CC) electrode, aiming at improving the affinity between the anode and outer membrane c-type cytochromes (OM c-Cyts) and achieving a highly active EAB. The FePc modified CC anode (FePc-CC) effectively improved the viability of EAB and enriched the Geobacter species up to 44.83% (FePc-CC) from 6.97% (CC). The FePc-CC anode achieved a much higher power density of 2419 mW m^-2 than the CC (560 mW m^-2) and a remarkable higher biomass loading of 2477.2 ± 84.5 μg cm^-2 than the CC (749.3 ± 31.3 μg cm^-2). As the charge transfer resistance was decreased by 58.6 times from 395.2 Ω (CC) to 6.74 Ω (FePc-CC), the interfacial reaction rate was accelerated and the direct electron transfer via OM c-Cyts was promoted. This work provides an effective method to improve the EAB activity by regulating its spatial structure, and opens the door toward the development of highly active EAB using metal phthalocyanines in MFCs.

Electrochemical aptasensor for NS1 detection: Towards a fast dengue biosensor

Dengue is one of the most commonly neglected tropical diseases transmitted by Aedes aegypti infected with Dengue virus. This virus belongs to the gender Flavivirus and produces a non-structural protein 1 (NS1), which is an important biomarker found at high levels in blood in early disease stage. Therefore, this study focused on the development of an electrochemical biosensor for NS1 detection using DNA aptamers. Gold electrodes were co-immobilized with specific aptamers and 6-mercapto-1-hexanol (MCH) to obtain a self-assembled monolayer. The molar ratio between aptamers and MCH was optimized and the platform characterized by electrochemical impedance spectroscopy and atomic force microscopy. Bovine serum albumin was added in NS1 solution to stabilize it and block the surface to avoid non-specific interactions. The biosensor performance was tested with NS1 protein serotype 4 (in phosphate saline buffer and human serum) and with a solution of serotype 1 in human serum. The results showed a sensitivity of 2.9%, 2.7% and 1.7% per decade, respectively, and low limit of detection (0.05, 0.022 and 0.025 ng/mL). The platform was also tested with Envelope protein as negative control. Furthermore, the aptamer sensor was able to detect NS1 in clinical range and it is a promising candidate for a new class for miniaturized point-of-care device for different Dengue serotypes.

A novel non-enzymatic glucose sensor based on NiFe(NPs)-polyaniline hybrid materials

This article was focused on the elaboration of NiFe-Polyaniline glucose sensors via electrochemical technique. Firstly, the PANi (polyaniline) fibers were synthesized by oxidation of the monomer aniline on FTO (fluorine tin oxide) substrate. Secondly, the Nickel-Iron nanoparticles (NiFe (NPs)) were obtained by the Chronoamperometry method on the Polyaniline surface. The NiFe-PANi hybrid electrode was characterized by scanning electron microscopy (SEM), force atomic microscopy (AFM), Fourier-transformed infrared (FTIR), and X-ray diffraction (XRD). The electrochemical glucose sensing performance of the NiFe alloy nanoparticle was studied by cyclic voltammetry and amperometry. The fabricated glucose sensor Ni-Fe hybrid material exhibited many remarkable sensing performances, such as low-response time (4 s), sensitivity (1050 μA mM^-1 cm^-2), broad linear range (from 10 μM -1 mM), and low limit of detection (LOD) (0.5 μM, S/N = 3). The selectivity, reliability, and stability of the NiFe hybrid material for glucose oxidation were also investigated. All the results demonstrated that the NiFe-PANi/FTO hybrid electrode is very promising for application in electrochemical glucose sensing.

Synthesis of biocompatible chitosan functionalized Ag decorated biocomposite for effective antibacterial and anticancer activity

The transition-metal dichalcogenides (TMDCs) like MoS₂ and WS₂ are a new and interesting class of materials and show considerable promise for use in a wide variety of fields, including nanomedicine for cancer. The eco-friendly, biodegradability, toxicity, and antimicrobial activity remain an open issue. Herein, we focused on the current demands of two dimensional (2D) TMDCs and produced high-quality, few-layered MoS₂ nanosheets. Noble metal Ag incorporated into the 2D-CS/MoS₂ NC by the liquid exfoliated process. The manufactured CS/MoS₂/Ag hybrid NC showed excellent antibacterial activity against two microorganisms such as Gram-positive (21, 27, and 33 mm) and Gram-negative bacteria (23, 30, and 39 mm). The CS/MoS_2/Ag hybrid NC was designed to have significant antibacterial activity against E.coli bacteria than S.aureus. Furthermore, the hybrid NC has a 74.18% cell inhibition against MCF-7 cancer cells. According to the literature relevant, it is the first extensive experimental analysis on the nano-bio interaction of 2D TMDCs nanomaterials in MCF-7 breast cancer cells.

Determination of paracetamol using a sensor based on green synthesis of silver nanoparticles in plant extract

The biosynthesis of nanometals using a plant extract is simple, efficient, fast, cost-effective and eco-friendly. In this study, a pine nut extract (Araucaria angustifolia) was obtained and used as a reducing and stabilizing agent in the synthesis of silver nanoparticles. An electrochemical sensor based on the silver nanoparticles obtained and exfoliated graphite nanoplatelets applied to a glassy carbon electrode was developed for the determination of paracetamol. To optimize the synthesis of the silver nanoparticles, important factors such as temperature, extract:water ratio, silver nitrate concentration and extract stability time were studied. The factors influencing the performance of the sensor were studied in detail and the results demonstrated good repeatability and electrode-to-electrode repeatability (relative standard deviations of 1.8 and 4.0 %, respectively). Under optimized conditions, there was a linear response to paracetamol concentrations of 4.98 × 10^-6 to 3.38 × 10^-5 mol L^-1, with a detection limit of 8.50 × 10^-8 mol L^-1. No reports on the biosynthesis of AgNPs using Araucaria angustifolia could be found in the literature. The sensor developed showed good stability and was used successfully for the quantification of paracetamol in pharmaceutical products.

Electrochemical detection of bisphenols in food: A review

Bisphenols (BPs) are worldwide used organic compounds in plastics, belonging to the group of endocrine disrupting chemicals (EDCs) which exhibits endocrine disruption to beings. Migration of BPs from food contact materials like plastic containers, epoxy coatings in metal cans and thermal papers, would results in bioaccumulation of BPs in human beings, causing adverse health effects. Therefore, sensitive and selective determination of BPs in food is needed. Among different strategies have been explored for the detection of BPs, electrochemical sensors with relatively high sensitivity and fast response are promising. This paper is devoted to comprehensively review the developed electrochemical methods for BPs sensing in food, so that to find a direction for developing low cost, high accuracy and compatibility sensors toward the sensitive and selective detection of BPs. Different electrochemical technologies categorized by recognition agents, aptamers, enzymes, molecularly imprinted polymers and nanomaterials are discussed and summarized in their mechanisms, usages, merits and limitations. The challenges and further perspectives in the development of electrochemical sensors is also discussed.

Electrochemical sensing of cytochrome c using Graphene Oxide nanoparticles as platform

An improved cytochrome c (Cyt c) biosensor based on immobilization of cytochrome c oxidase (COx) on the surface of graphene oxide nanoparticles (GONPs) electrodeposited onto pencil graphite (PG) electrode. Characterization of graphene oxide nanoparticle was done by Transmission electron microscopy (TEM), Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction study (XRD). The working electrode (COx/GONPs/PG) was characterized at its different stages of fabrication by scanning electron microscopy (SEM) and FTIR. Fabrication of Cyt c biosensor was done by connecting COx/GONPs/PG as working electrode, Ag/AgCl as reference electrode and Pt as auxiliary electrode to potentiostat. The mechanism of detection of present biosensor was based on oxidation of Cyt c (reduced) to Cyt c (oxidized) by COx resulting in flow of electrons through GONPs to the PG electrode, hence current generated is proportional to the concentration of Cyt c. Present biosensor exhibited optimum potential at 0.49 V with optimum pH 7.5 and optimum temperature 35°C. Biosensor showed linearity within 40-180 ng/ml having 40 ng/ml limit of detection. The precision i.e. within and between-batch coefficients of variation (CVs) were found <0.04% and <0.21% respectively. The enzyme electrode lost 50% of its initial activity when operated for more than 6 months on weekly basis. It was applied for detection of Cyt c level in in apparently healthy and diseased human sera. The present biosensing method was co-related with standard colorimetric method and co-relation coefficient was found 0.99.

In situ decorated Au NPs on chitosan-encapsulated Fe3O4-NH2 NPs as magnetic nanocomposite: Investigation of its anti-colon carcinoma, anti-gastric cancer and anti-pancreatic cancer

Chitosan is a linear polysaccharide and non-toxic bioactive polymer with a wide variety of applications due to its functional properties such as ease of modification, and biodegradability. In this investigation, magnetic cores (Fe₃O₄) were synthesized using a fabrication method involving coprecipitation of Fe²⁺ and Fe³⁺. Then the magnetic nanoparticles were encapsulated by chitosan layers. In the next step, magnetite-gold composite nanoparticles were synthesized with spherical shapes and sizes ranging from 20 to 30 nm, using sodium citrate as a natural reducing agent. The morphological and physicochemical features of the material were determined using several advanced techniques like FT-IR, ICP analysis, FESEM, EDS, XRD, TEM, XPS and VSM. In the biological part of the present study, the cell viability of Fe₃O₄, HAuCl₄, and Fe₃O₄@CS/AuNPs was very low against human colorectal carcinoma cell lines i.e. Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29, human gastric cancer cell lines i.e. MKN45, AGS, and KATO III, and human pancreatic cancer cell lines i.e. PANC-1, AsPC-1, and MIA PaCa-2. The IC50 of Fe₃O₄@CS/AuNPs against Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, HT-29, MKN45, AGS, KATO III, PANC-1, AsPC-1, and MIA PaCa-2 cell lines were 385, 429, 264, 286, 442, 498, 561, 513, 528, and 425 μg/mL, respectively. Thereby, the best cytotoxicity results of our Fe₃O₄@CS/AuNPs were observed in the case of the HCT 116 cell line. Seemingly, the present nanoparticles may be used for the treatment of several types of gastro-duodenal cancers especially colon, gastric, and pancreatic cancers in near future.

An Electrochemical Approach for the Selective Detection of Cancer Metabolic Creatine Biomarker with Porous Nano-Formulated CMNO Materials Decorated Glassy Carbon Electrode

The facile wet-chemical technique was used to prepare the low-dimensional nano-formulated porous mixed metal oxide nanomaterials (CuO.Mn2O3.NiO; CMNO NMs) in an alkaline medium at low temperature. Detailed structural, morphological, crystalline, and functional characterization of CMNO NMs were performed by X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray spectroscopy (EDS) analyses. An efficient and selective creatine (CA) sensor probe was fabricated by using CMNO NMs decorated onto glassy carbon electrode (GCE) as CMNO NMs/GCE by using Nafion adhesive (5% suspension in ethanol). The relation of current versus the concentration of CA was plotted to draw a calibration curve of the CMNO NMs/GCE sensor probe, which was found to have a very linear value (r2 = 0.9995) over a large dynamic range (LDR: 0.1 nM~0.1 mM) for selective CA detection. The slope of LDR by considering the active surface area of GCE (0.0316 cm2) was applied to estimate the sensor sensitivity (14.6308 µAµM-1 cm-2). Moreover, the detection limit (21.63 ± 0.05 pM) of CMNO MNs modified GCE was calculated from the signal/noise (S/N) ratio at 3. As a CA sensor probe, it exhibited long-term stability, good reproducibility, and fast response time in the detection of CA by electrochemical approach. Therefore, this research technique is introduced as a promising platform to develop an efficient sensor probe for cancer metabolic biomarker by using nano-formulated mixed metal oxides for biochemical as well as biomedical research for the safety of health care fields.

Analytical performance of functional nanostructured biointerfaces for sensing phenolic compounds

Electrochemical biointerfaces are constructed with a wide range of nanomaterials and conducting polymers that strongly affect the analytical performance of biosensors. The analysis of progress toward electrochemical sensing platforms offers opportunities to provide devices for commercial use. The investigation of different methods for the synthesis of phenol biointerfaces leads to design challenges in the field of monitoring phenolic compounds. This paper review the innovative strategies and feature techniques in the construction of phenolic compound biosensors. The focus was made on the preparation methods of nanostructures and nanomaterials design for catalytic improvements of sensing interfaces. The paper also provides a comprehensive overview in the field of enzyme immobilization approaches at solid supports and technical formation of polymer nanocomposites, as well as applications of hybrid organic-inorganic nanocomposites in phenolic biosensors. This review also highlights the recent progress in the electrochemical detection of phenolic compounds and summarizes analytical performance parameters including sensitivity, storage stability, limit of detection, linear range, and Michaelis-Menten kinetic analysis. It also emphasizes advances from the past decade including technical challenges for the construction of suitable biointerfaces for monitoring phenolic compounds.

Advances in Electrochemical Aptasensors Based on Carbon Nanomaterials

Carbon nanomaterials offer unique opportunities for the assembling of electrochemical aptasensors due to their high electroconductivity, redox activity, compatibility with biochemical receptors and broad possibilities of functionalization and combination with other auxiliary reagents. In this review, the progress in the development of electrochemical aptasensors based on carbon nanomaterials in 2016–2020 is considered with particular emphasis on the role of carbon materials in aptamer immobilization and signal generation. The synthesis and properties of carbon nanotubes, graphene materials, carbon nitride, carbon black particles and fullerene are described and their implementation in the electrochemical biosensors are summarized. Examples of electrochemical aptasensors are classified in accordance with the content of the surface layer and signal measurement mode. In conclusion, the drawbacks and future prospects of carbon nanomaterials’ application in electrochemical aptasensors are briefly discussed.

Gold/SH-functionalized nanographene oxide/polyamidamine/poly(ethylene glycol) nanocomposites for enhanced non-enzymatic hydrogen peroxide detection

Hydrogen peroxide (H₂O₂) is an important mediator in biological medicine, disease diagnosis and environmental analyses and therefore it is essential to develop a detection approach for H₂O₂ in physical environments. Herein, we designed and prepared a series of AuNP-containing nanocomposites (AuNPs@NGO-PEG, AuNPs@G1-PAMAM-NGO-PEG and AuNPs@G3-PAMAM-NGO-PEG) for enhanced non-enzymatic H₂O₂ detection. We firstly demonstrated functionalized nanographene oxide (NGO) based materials, which combined advantages of biocompatible poly(ethylene glycol) (PEG), hyperbranched polyamidamine (PAMAM) dendrimer and thiol active site, as compatible platforms. Gold nanoparticles (AuNPs) were then aptly in situ grown on these functionalized NGO based materials via the reduction of HAuCl₄ under mild conditions, i.e. AuNPs@NGO-PEG, AuNPs@G1-PAMAM-NGO-PEG and AuNPs@G3-PAMAM-NGO-PEG nanocomposites, which possess stable and uniform AuNPs standing on the functionalized NGO sheets. For H₂O₂ detection, these nanocomposites were cast on a glassy carbon electrode (GCE) conveniently, i.e. GCE/AuNPs@NGO-PEG, GCE/AuNPs@G1-PAMAM-NGO-PEG and GCE/AuNPs@G3-PAMAM-NGO-PEG. It is evident that these GCEs could be applied as efficient non-enzymatic H₂O₂ detectors resulting from the corresponding cyclic voltammetric curves and typical ready-state amperometric curves. GCE/AuNPs@G1-PAMAM-NGO-PEG exhibited the fastest electron transfer rate among these modified GCEs. We envisage that these GCEs could provide efficient sensors for H₂O₂ detection and a new strategy for sensor design.

High-Performance Voltammetric Aptasensing Platform for Ultrasensitive Detection of Bisphenol A as an Environmental Pollutant

Bisphenol A (BPA) as a pervasive endocrine-disrupting compound (EDC) has been shown to cause multiple detrimental effects including cardiovascular disorders, pregnancy complications, obesity, glucose metabolism disorders, and reproductive toxicity even at a concentration as low as tolerable daily intake (TDI) (4 μg/kg/day). In the present study, a novel ultra-sensitive, electrochemical aptasensor was designed using a screen-printed carbon electrode (SPCE) modified by gold nanoparticles (Au NPs) conjugated to thiolated aptamers for accurate determination of BPA in biological, industrial and environmental samples. To characterize the electrochemical properties of the aptasensor, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were implemented. Detection of BPA was also performed through differential pulse voltammetry (DPV) in [Fe(CN)₆]^3–/4– electrolyte solution. Under optimum condition, the present electrochemical aptasensor demonstrated an outstanding linear response in the concentration range of 1 pM to 10 nM with a remarkably low limit of detection of 0.113 pM. Due to the superb affinity between anti-BPA aptamers and BPA molecules, the designed aptasensor did not show any significant interaction with other analytes in real samples. Also, fabricated biosensor remained perfectly stable in long-term storage. The analytical results of the fabricated aptasensor are well compatible with those obtained by the ELISA method, indicating the trustworthiness and reasonable accuracy of the application of aptasensor in real samples. Overall, the proposed aptasensor would be a credible and economical method of precise, reproducible, and highly selective detection of minimum levels of BPA in food containers and clinical samples. This would be a promising strategy to enhance the safety of food products and reduce the risk of BPA daily exposure.

Modulating physicochemical properties in Gd3+@Yb2O3 nanospheres for efficient electrochemical monitoring of H2O2

Herein, a uniform spherical shaped Gd(III) doped Yb₂O₃ (Gd@Yb₂O₃) nanoparticles (NPs) was successfully synthesized via hydrothermal method for electrochemical detection of H₂O₂. The calcination effect and porosity of the materials well elaborated in the present work. The optical properties, size, morphological, thermal, sensing, surface and crystalline properties of synthesized materials were examined by several techniques. The enhanced electrocatalytic performance of Gd@Yb₂O₃ make the present sensor excellent towards the determination of H₂O₂.The anodic and cathodic peak current increased regularly with addition of H₂O₂ solution. The electrode coating surface was stable even after a number of electrochemical cycles and have high limit of detection (51 nM). Moreover, the present sensor was successfully employed for detection of H₂O₂ in real samples.

Electrochemical aptasensors based on the gold nanostructures

Electrochemical aptasensors as novel diagnostic tools have attracted sufficient research interest in biomedical sciences. In this review, recent leading trends about gold (Au) nanostructures based electrochemical aptasensors have been collected, reviewed, and compared. Here, the considered electrochemical aptasensors were categorized based on the analytes and diagnostic techniques. Pharmaceutical analytes and biomolecules were reviewed in a separate section consisting of a variety of antibiotics, analgesics, and other biomolecules. Various aptasensors have also measured toxins, ions, and hazardous chemicals, and the findings of them have also been reviewed. Many aptasensors have been designed to detect different disease biomarkers that will play an essential role in the future of early diagnosis of diseases. Pathogen microorganisms have been considered as the analyte in several designed electrochemical aptasensors in recent researches, and their results have been reviewed and discussed as another section. Important aspects considered in the review of the mentioned aptasensors were the type of analyte, features of the aptamer as the biorecognition element, type of Au nanostructures, diagnostic technique, diagnostic mechanism, detection range and the limit of detection (LOD). In the last section, an in-depth analysis has been provided based on the crucial features of all included aptasensors.

A review: Recent advances in ultrasensitive and highly specific recognition aptasensors with various detection strategies

One of the most studied topics in analytical chemistry and physics is to develop bio-sensors. Aptamers are small single-stranded RNA or DNA oligonucleotides (5-25 kDa), which have advantages in comparison to their antibodies such as physicochemical stability and high binding specificity. They are able to integrate with proteins or small molecules, including intact viral particles, plant lectins, gene-regulation factor, growth factors, antibodies and enzymes. The aptamers have reportedly shown some unique characteristics, including long shelf-life, simple modification to provide covalent bonds to material surfaces, minor batch variation, cost-effectiveness and slight denaturation susceptibility. These features led important efforts toward the development of aptamer-based sensors, known as apta-sensors classified into optical, electrical and mass-sensitive based on the signal transduction mode. This review provided a number of current advancements in selecting, development criteria, and aptamers application with the focus on the effect of apta-sensors, specifically for disease-associated analyses. The review concentrated on the current reports of apta-sensors that are used for evaluating different food and environmental pollutants.

Simplistic one-pot synthesis of an inorganic–organic cubic caged material: a new interface for detecting toxic bisphenol-A electrochemically

Polyhedral oligomeric silsesquioxane (POSS) based hybrid nanomaterials have been terminally functionalised with three different functional groups and are newly explored for the electrochemical sensing of bisphenol A.

An electrochemical aptasensor based on eATRP amplification for the detection of bisphenol A

Herein, a novel aptasensor was constructed for ultrasensitive detection of bisphenol A (BPA). In this method, an electrochemically mediated atom transfer radical polymerization (eATRP) signal amplification strategy was applied to BPA detection for the first time. The 5'-end modified sulfhydryl group and the 3'-end modified azide group hairpin DNA were immobilized on a gold electrode through an Au-S bond. The double-stranded DNA was formed by the hybridization of an aptamer and a single-stranded DNA partially paired with the hairpin DNA. In the presence of BPA, the aptamer combined with BPA and the single-stranded DNA was released to open the hairpin structure, making the azide groups at the 3' end exposed. Subsequently the initiator of eATRP was introduced into hairpin DNA through click chemistry reaction and eATRP was conducted for the polymerization of the electroactive probe ferrocene methyl methacrylate (FMMA). As a result, the ultrasensitive detection of BPA was realized, and the detection limit of this aptasensor was as low as 59 aM and a good selectivity was obtained in the presence of 100-fold structural analogs. The application of this aptasensor was evaluated by detecting BPA in pure water samples, and recoveries were in the range of 95.23-98.40%, holding promising applications in biological analysis.

Rapid and sensitive determination of bisphenol A using aptamer and split DNAzyme

Despite the increasing concern regarding bisphenol A (BPA) as an endocrine disrupting chemical (EDC) upon environmental or human exposure, development of simple method for BPA detection has been hampered, due to the lack of a stable bioreceptor and signal generator. Here, we report a nucleic acid-based rapid and sensitive method for BPA detection, which constitutes a ssDNA aptamer and ssDNAzyme. When the peroxidase-like DNAzyme sequence was split into two parts (one incorporated into the anti-BPA aptamer as a target recognition element and the other into the complementary sequence as a bait), the presence of BPA hindered the association of the split DNA sequence, leading to a reduced signal in the DNAzyme-triggered chemiluminescence (CL). Thus, this NA-based CL measurement permitted the detection of BPA at as low as 5 nM with a broad dynamic range of five orders and with high selectivity towards BPA over other EDCs with structural similarity. With the development of aptamers, our detection method is expected to facilitate studies to monitor EDCs with high simplicity and sensitivity in the field of environmental science.

The role of pramipexole functionalized MWCNTs to the fabrication of Pd nanoparticles modified GCE for electrochemical detection of dopamine

BACKGROUND

Interest in functionalized carbon nanotubes for many applications arises from a variety on the kind of modification atoms or molecules that are attached to it. Dopamine, the feel-good hormone, release by neurons and playing an important role in body systems. Abnormal dopamine levels cause nerve disorders such as Parkinson's disease and schizophrenia.

OBJECTIVES

The aim of this study was the design and fabrication of electrochemical sensor based on MWCNTs and Pd nanoparticles for detection and determination of dopamine in biological samples.

METHODS

For this purpose, we report the synthesis of pramipexole-functionalized MWCNTs (pp-MWCNTs) for efficient capture of palladium nanoparticles and fabrication of Pd/pp-MWCNTs nanocomposite. Morphological and structural characteristics of the nanocomposites were characterized using various techniques including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT-IR).

RESULTS

This newly synthesized nanocomposite may have numerous applications in nanotechnology and sensing. We show that the synthesized nanocomposite reported here will be applicable for modifications of bare glassy carbon electrode (Pd/pp-MWCNTs/GCE) to sense of dopamine electrochemically. Two linear calibrations for dopamine are obtained over ranges of 0.01 to 10 μM and 10 to 200 μM with a detection limit of 1.4 nM. The Pd/pp-MWCNTs/GCE shows high stability and sensitivity, and an acceptable decrease of over-potential for the electrooxidation of dopamine that decreases interference in the analysis. The proposed Pd/pp-MWCNTs nanocomposite can be used as a voltammetric detector for dopamine monitoring in routine real sample analysis.

CONCLUSIONS

The proposed sensor showed high sensitivity and selectivity in sensing dopamine in biological samples. Graphical abstract Preparation of Pd/pp-MWCNTs/GCE for detection of dopamine.

Simple and rapid detection of bisphenol A using a gold nanoparticle-based colorimetric aptasensor

A colorimetric aptasensor was developed for the simple and rapid detection of bisphenol A (BPA). The aptasensor was designed to consist of colloidal gold nanoparticles (AuNPs) and a BPA-specific 24-bp aptamer. The AuNP-aptamer conjugates underwent an electrolyte-induced aggregation in the presence of sub-ppb levels of BPA. The surface plasmon resonance shift of AuNPs facilitated a color change from red to blue upon aggregation, which was visually observed by the naked eye. The corresponding visual limit of detection of BPA was as low as 1 pg/mL (0.004 nM). The aptasensor also achieved a selective detection of BPA over a variety of BPA analogs. The applicability of the aptasensor was verified via a successful detection of BPA in a single grain of rice. This result indicates that the colorimetric aptasensor can be used in a screening procedure for food and environmental monitoring, with reliable performance to sub-ppb levels of BPA detection.