Molecularly imprinted matrix solid-phase dispersion coupled to micellar electrokinetic chromatography for simultaneous determination of triazines in soil, fruit, and vegetable samples

Preparation and evaluation of a chitosan modified biochar as an efficient adsorbent for pipette tip-solid phase extraction of triazine herbicides from rice

The low allowable limit of triazine herbicides (THs) in rice makes it imperative to develop novel sample pretreatment methods for extraction and preconcentration of THs. Herein, a phosphoric acid activated biochar (PBC) was prepared and modified by chitosan (CS). For THs with different polarities, CS-PBC with multiple interaction sites exhibited satisfactory chemisorption. On this basis, a CS-PBC-based pipette tip-solid phase extraction (PT-SPE) was developed combined with HPLC to extract THs from rice. Low limits of detection (1.41-3.35 ng g^-1), satisfactory linearity (0.01-2.00 μg g^-1, R² > 0.9974) and recoveries (96.13-116.25 %) were obtained with acceptable inter-day and intra-day precision (RSD ≤ 13.60 %). CS-PBC showed superior performance to three commercial single-mode adsorbents and comparable results to a hydrophilic-lipophilic balance adsorbent. The study explored the feasibility of PT-SPE for extracting THs from rice and broadened the application of plant biochar as an environmentally-friendly matrix in food sample pretreatment.

Silica gel impregnated with deep eutectic solvent-based matrix solid-phase dispersion followed by high-performance liquid chromatography for extraction and detection of triazine herbicides in brown sugar

A novel method was developed to determine six triazine herbicides from brown sugar samples using matrix solid-phase dispersion (MSPD) based on silica gel impregnated with deep eutectic solvent (DES) followed by high-performance liquid chromatography with photodiode array detector (HPLC/PDA). Several factors involved in the MSPD procedure such as DES type, DES content in impregnated silica gel, adsorbent-to-sample mass ratio, type and volume of washing solvent, type and volume of eluent, and grinding time were screened using single-factor experiments and then optimized using Box-Behnken design to accomplish the highest recoveries. The above method demonstrated a good linear range (20-1000 μg kg^-1) with a determination coefficient exceeding 0.9962, low limits of determination (1.59-3.77 μg kg^-1), acceptable limits of quantifications, and acceptable spiking recoveries (95.0-101.7%) for six triazines under optimized conditions. The proposed MSPD-HPLC/PDA method is a convenient, effective, and sensitive method for rapidly isolating and quantifying six triazines from brown sugar.

Synthesis of molecularly imprinted polymers based on boronate affinity for diol-containing macrolide antibiotics with hydrophobicity-balanced and pH-responsive cavities

In this research, in order to separate and purify diol-containing macrolide antibiotics, like tylosin, from complex biological samples, molecularly imprinted polymer (MIP) based on boronate affinity for tylosin was synthesized by using precipitation polymerization method with 4-vinylphenylboronic acid (VPBA) and dimethyl aminoethyl methacrylate (DMAEMA) as pH-responsive functional monomers, and N,N'-methylene bisacrylamide (MBAA)/ ethylene glycol dimethacrylate (EGDMA) as the co-crosslinkers that balance the hydrophobicity of the MIP. The synthesized tylosin-MIP had the advantages of high adsorption capacity (120 mg/g), fast pH-responsiveness responsible for the accessibility of imprinted cavities, and high selectivity coefficient towards tylosin versus its analogues (2.8 versus spiramycin, 7.3 versus desmycosin) in an aqueous environment. The mechanism of boronate affinity between tylosin and VPBA in the form of charged hydrogen bonding was analyzed via density functional theory (DFT). MIPs were used to successfully separate diol-containing macrolides through molecularly imprinted solid phase extraction (MISPE). The results show that MIPs prepared in this method have a good application prospect in the separation and purification of the diol-containing macrolide antibiotics.

Influence of pH, ionic strength and natural organic matter concentration on a MIP-Fluorescent sensor for the quantification of DNT in water

The effect of sample water chemistry on a carbon dot labeled molecularly imprinted polymer (AC-MIP) sensor for the detection of 2,4-dinitrotoluene (DNT) was investigated. Hydrogel MIP films were fabricated and tested in DNT solutions in various matrices, representative of natural water conditions, to assess applicability of the sensors to real water samples. The effect of pH, natural organic matter (NOM), ionic strength and cation type on the swelling of the hydrogel and fluorescence quenching was investigated. An increase in ionic strength from 1 mM to 100 mM produced a quenching amount of MIPs decreased of about 19% and 30% with NaCl and CaCl₂ respectively. In the range of pH tested, from 4 to 9, quenching was higher at basic environment for both MIPs and non-imprinted polymers (NIPs) due to increased hydrogel swelling. NOM contributed to the background quenching, but the effect could be addressed by an adjusted calibration equation. In both lake and tap water, DNT concentrations read by the sensors were close to the values measured by HPLC, within 72%–105% of true values. The AC-MIP films fabricated in this work are promising materials for the detection of water contamination in the field and the quantitative analysis of DNT concentration.

Molecularly imprinted polymers' application in pesticide residue detection

Molecularly imprinted polymers (MIPs) are produced using molecular imprinting technology (MIT) and have specific analyte-binding abilities and unique properties, including chemical and thermal stability, reusability, high selectivity, and high sensitivity. The application of MIPs in the detection of pesticides represents an advance and a superior scientific approach owing to their detection and characterization of trace levels in comparison with other methods. In this review, we have summarized the pre-treatment extraction of pesticides with different types of molecularly imprinted polymer for the detection of single and multiple pesticides by elaborating upon their specific extraction efficiency. The importance of different polymerization methods, functional monomers and cross-linkers is highlighted. The aim of this study is to investigate the importance of the application of MIPs in the detection of pesticides and recent advances in the last few years to overcome the limitations of previously developed methods. Existing restrictions and required future aspects are discussed.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Leydig cell number and sperm production decrease induced by chronic ametryn exposure: a negative impact on animal reproductive health

Ametryn is an herbicide used to control broadleaf and grass weeds and its acute and chronic toxicity is expected to be low. Since toxicological data on ametryn is scarce, the aim of this study was to evaluate rat reproductive toxicity. Thirty-six adult male Wistar rats (90 days) were divided into three groups: Co (control) and T1 and T2 exposed to 15 and 30 mg/kg/day of ametryn, respectively, for 56 days. Testicular analysis demonstrated that ametryn decreased sperm number per testis, daily sperm production, and Leydig cell number in both treated groups, although little perceptible morphological change has been observed in seminiferous tubule structure. Lipid peroxidation was higher in group T2, catalase activity decreased in T1 group, superoxide dismutase activity diminished, and a smaller number of sulphydryl groups of total proteins were verified in both exposed groups, suggesting oxidative stress. These results showed negative ametryn influence on the testes and can compromise animal reproductive performance and survival.

Determination of three phenoxyacid herbicides in environmental water samples by the application of dispersive liquid-liquid microextraction coupled with micellar electrokinetic chromatography

Abstract An efficient method based on dispersive liquid-liquid microextraction coupled with micellar electrokinetic chromatography has been developed for determination of three phenoxyacid herbicides (PAs) of 2,4-dichlorophenoxybutyric acid (2,4-DB), dicamba and 2,4-dichlorophenoxyacetic acid (2,4-D), in environmental water samples. The types and volumes of extracting and dispersing solvents, ionic strength, extraction and centrifugation time and centrifugation speed were investigated. Successful separation of the three PAs was achieved within 7 min, by using the background electrolyte solution consisting of 10 mmol L−1 sodium tetraborate, 25 mmol L−1 sodium dodecyl sulfate and 15% (v/v) methanol, at pH 9.75. Excellent analytical performances were attained, such as good linear relationships (R ≥0.9993) between peak area and concentration for each PAs from 10–1000 ng mL−1, limits of detection of 1.56–1.91 ng mL−1, and intra-day precisions at two spiked levels in terms of migration time and peak area within the range of 0.22–0.42% and 3.88–6.39%, respectively. Enrichment factors of 2,4-DB, dicamba and 2,4-D were 180, 151 and 216, respectively. The method recoveries obtained at fortified 20.0, 50.0 and 100.0 ng mL−1 for lake, river and reservoir water samples varied from 67.91 to 119.07% with the relative standard deviation of 1.47–6.89%. Graphical abstract

Recent advances in enrichment techniques for trace analysis in capillary electrophoresis

CE is gaining great popularity as a well-established separation technique for many fields such as pharmaceutical research, clinical application, environmental monitoring, and food analysis, owing to its high resolving power, rapidity, and small amount of samples and reagents required. However, the sensitivity in CE analysis is still considered as being inferior to that in HPLC analysis. Diverse enrichment methods and techniques have been increasingly developed for overcoming this issue. In this review, we summarize the recent advances in enrichment techniques containing off-line preconcentration (sample preparation) and on-line concentration (sample stacking) to enhancing sensitivity in CE for trace analysis over the last 5 years. Some relatively new cleanup and preconcentration methods involving the use of dispersive liquid-liquid microextraction, supercritical fluid extraction, matrix solid-phase dispersion, etc., and the continued use and improvement of conventional SPE, have been comprehensively reviewed and proved effective preconcentration alternatives for liquid, semisolid, and solid samples. As for CE on-line stacking, we give an overview of field amplication, sweeping, pH regulation, and transient isotachophoresis, and the coupling of multiple modes. Moreover, some limitations and comparisons related to such methods/techniques are also discussed. Finally, the combined use of various enrichment techniques and some significant attempts are proposed to further promote analytical merits in CE.