Polyimine Container Molecules and Nanocapsules

Molecular imine cages with π-basic Au3(pyrazolate) faces

One tetrahedral and two trigonal prismatic cages with π-basic Au3(pyrazolate)3 faces were obtained by connection of pre-formed gold complexes via dynamic covalent imine chemistry. The parallel arrangement of the Au3(pyrazolate)3 complexes in the prismatic cages augments the interaction with π-acids, as demonstrated by the encapsulation of polyhalogenated aromatic compounds. The tetrahedral cage was found to act as a potent receptor for fullerenes. The structures of the three cages, as well as the structures of adducts with C60 and C70, could be established by X-ray crystallography.

Graphene oxide-based large-area dynamic covalent interfaces

Dynamic materials, being capable of reversible structural adaptation in response to the variation of external surroundings, have experienced significant advancements in the past several decades. In particular, dynamic covalent materials (DCMs), where the dynamic covalent bonds (DCBs) can reversibly break and reform under defined conditions, present superior dynamic characteristics, such as self-adaptivity, self-healing and shape memory. However, the dynamic characteristics of DCBs are mainly limited within the length scale of covalent bonds, due to the local position exchange or the inter-distance variation between the chemical compositions involved in the reversible covalent reactions. In this minireview, a discussion regarding the realization of long-range migration of chemical compositions along the interfaces of graphene oxide (GO)-based materials via the spatially connected and consecutive occurrence of DCB-based reversible covalent reactions is presented, and the interfaces are termed "large-area dynamic covalent interfaces (LDCIs)". The effective strategies, including water adsorption, interfacial curvature and metal-substrate support, as well as the potential applications of LDCIs in water dissociation and humidity sensing are summarized. Additionally, we also give an outlook on potential strategies to realize LDCIs on other 2D carbon-based materials, including the interfacial morphology and periodic element doping. This minireview provides insights into the realization of LDCIs on a wider range of 2D materials, and offers a theoretical perspective for advancing materials with long-range dynamic characteristics and improved performance, including controlled drug delivery/release and high-efficiency (bio)sensing.

Cross-linking reactions in Langmuir monolayers of specially designed aminolipids - a toolbox for the customized production of amphiphilic nanosheets

Synthetic amino lipids, already known as highly efficient gene therapy tool, are used in a novel way to create cross-linked stable one-molecule-thin films envisioned for future (bio)-materials applications. The films are prepared as Langmuir monolayers at the air/water interface and cross-linked 'in situ' via dynamic imine chemistry. The cross-linking process and the film characteristics are monitored by various surface-sensitive techniques such as grazing incidence X-ray diffraction, X-ray reflectivity, and infrared reflection-absorption spectroscopy. After transfer onto carbon grids, the cross-linked films are investigated by transmission and scanning electron microscopy. The obtained micrographs display mechanically self-supported nanosheets with area dimensions over several micrometers and, thus, an undeniable visual proof of successful cross-linking. The cross-linking process at the air/water interface allows to obtain Janus-faced sheets with a hydrophobic side characterized by aliphatic alkyl chains and a hydrophilic side characterized by nucleophilic groups like amines, hydroxyl groups and imine.

Crystalline Nanoparticles of Water-Soluble Covalent Basket Cages (CBCs) for Encapsulation of Anticancer Drugs

We herein describe the preparation, assembly, recognition characteristics, and biocompatibility of novel covalent basket cage CBC-11, composed of four molecular baskets linked to four trivalent aromatic amines through amide groups. The cage is tetrahedral in shape and similar in size to small proteins (Mw =8637 g/mol) with a spacious nonpolar interior for accommodating multiple guests. While 24 carboxylates at the outer surface of CBC-11 render it soluble in aqueous phosphate buffer (PBS) at pH=7.0, the amphiphilic nature prompts its assembly into nanoparticles (d=250 nm, DLS). Cryo-TEM examination of nanoparticles revealed their crystalline nature with wafer-like shapes and hexagonally arranged cages. Nanoparticulate CBC-11 traps anticancer drugs irinotecan and doxorubicin, with each cage binding up to four drug molecules in a non-cooperative manner. The inclusion complexation resulted in nanoparticles growing in size and precipitating. In media containing mammalian cells (HCT 116, human colon carcinoma), the IC50 value of CBC-11 was above 100 μM. While this work presents the first example of a large covalent organic cage operating in water at the physiological pH and forming crystalline nanoparticles, it also demonstrates its biocompatibility and potential to act as a polyvalent binder of drugs for their sequestration or delivery.

Self-Assembly of a Purely Organic Bowl in Water via Acylhydrazone Formation

A bowl-shaped molecule can be self-assembled by condensing a triscationic hexaaldehyde compound and three equiv. of a dihydrazide linkers in pure water. The molecular bowl is thus composed of a triscationic π-electron deficient platform, as well as a hexagonal rim that contains six acylhydrazone functions. When the counteranions are chloride, the solid-state structure reveals that this molecular bowl undergoes dimerization via N-H···Cl hydrogen bonds, forming a cage-like dimer with a huge inner cavity. This molecular bowl can employ its cavity to accommodate a hydrophobic guest, namely 1-adamantanecarboxylic acid in aqueous media.

A tetrahedron from homooxacalix[3]arene, the fifth Platonic polyhedron from calixarenes and uranyl

A self-assembled tetrahedral cage results from two C ₃-symmetry building blocks, namely, homooxacalix[3]arene tricarboxylate and uranyl cation, as demonstrated by X-ray crystallography. In the cage, four metals coordinate at the lower rim with the phenolic and ether oxygen atoms to shape the macrocycle with appropriate dihedral angles for tetrahedron formation, whereas four additional uranyl cations further coordinate at the upper-rim carboxylates to finalize the assembly. Counterions dictate the filling and porosity of the aggregates, whereas potassium induces highly porous structures, and tetrabutylammonium yields compact, densely packed frameworks. The tetrahedron metallo-cage complements our previous report (Pasquale et al., Nat. Commun., 2012, 3, 785) on uranyl-organic frameworks (UOFs) from calix[4]arene and calix[5]arene carboxylates (octahedral/cubic and icosahedral/dodecahedral giant cages, respectively) and completes the assembly of all five Platonic solids from just two chemical components.

Purely Covalent Molecular Cages and Containers for Guest Encapsulation

Cage compounds offer unique binding pockets similar to enzyme-binding sites, which can be customized in terms of size, shape, and functional groups to point toward the cavity and many other parameters. Different synthetic strategies have been developed to create a toolkit of methods that allow preparing tailor-made organic cages for a number of distinct applications, such as gas separation, molecular recognition, molecular encapsulation, hosts for catalysis, etc. These examples show the versatility and high selectivity that can be achieved using cages, which is impossible by employing other molecular systems. This review explores the progress made in the field of fully organic molecular cages and containers by focusing on the properties of the cavity and their application to encapsulate guests.

Dissipative Formation of Covalent Basket Cages

Living systems use chemical fuels to transiently assemble functional structures. As a step toward constructing abiotic mimics of such structures, we herein describe dissipative formation of covalent basket cage CBC 5 by reversible imine condensation of cup-shaped aldehyde 2 (i.e., basket) with trivalent aromatic amine 4. This nanosized [4+4] cage (V=5 nm3 , Mw =6150 Da) has shape of a truncated tetrahedron with four baskets at its vertices and four aromatic amines forming the faces. Importantly, tris-aldehyde basket 2 and aliphatic tris-amine 7 undergo condensation to give small [1+1] cage 6. The imine metathesis of 6 and aromatic tris-amine 4 into CBC 5 was optimized to bias the equilibrium favouring 6. Addition of tribromoacetic acid (TBA) as a chemical fuel perturbs this equilibrium to result in the transient formation of CBC 5, with subsequent consumption of TBA via decarboxylation driving the system back to the starting state.

Imine- and Amine-Type Macrocycles Derived from Chiral Diamines and Aromatic Dialdehydes

The condensation of aromatic dialdehydes with chiral diamines, such as 1,2-trans-diaminocyclohexane, leads to various enantiopure or meso-type macrocyclic Schiff bases, including [2 + 2], [3 + 3], [4 + 4], [6 + 6] and [8 + 8] condensation products. Unlike most cases of macrocycle synthesis, the [3 + 3] macrocycles of this type are sometimes obtained in high yields by direct condensation without a metal template. Macrocycles of other sizes from this family can often be selectively obtained in high yields by a suitable choice of metal template, solvent, or chirality of the building blocks. In particular, the application of a cadmium(II) template results in the expansion of the [2 + 2] macrocycles into giant [6 + 6] and [8 + 8] macrocycles. These imine macrocycles can be reduced to the corresponding macrocyclic amines which can act as hosts for the binding of multiple cations or multiple anions.

Recent trends in organic cage synthesis: push towards water-soluble organic cages

Research on organic cages has blossomed over the past few years into a mature field of study which can contribute to solving some of the challenging problems. In this review we aim to showcase the recent trends in synthesis of organic cages including a brief discussion on their use in catalysis, gas sorption, host-guest chemistry and energy transfer. Among the organic cages, water-soluble analogues are a special class of compounds which have gained renewed attention in recent times. Due to their advantage of being compatible with water, such cages have the potential of showing biomimetic activities and can find use in drug delivery and also as hosts for catalysis in aqueous medium. Hence, the synthetic strategies for the formation of water-soluble organic cages shall be discussed along with their potential applications.

Cagearenes: synthesis, characterization, and application for programmed vapor release

Here, we announce the establishment of a new family of organic molecular cages, named cagearenes, by taking advantage of a versatile strategy. These cagearenes were prepared via the Friedel–Crafts reaction by condensing two equivalents of a precursor bearing three 1,4-dimethoxybenzene groups and three equivalents of formaldehyde. Two cages, namely cagearene-1 and cagearene-2, are obtained and well characterized. The cagearene-1 solid exhibits the ability to adsorb benzene vapour from an equimolar benzene/cyclohexane mixture with a purity of 91.1%. Then, the adsorbed benzene molecules can be released from the cage at a relatively lower temperature, namely 70 °C, as a consequence of which, cyclohexane with a high purity was left within the cage solid. Heating the cage solid further at 130 °C led to the production of cyclohexane with a purity up to 98.7%. As inferred from the single crystal structures and theoretical calculations, the ability of the cage in programmed release of benzene and cyclohexane results from the different binding modes of these two guests.

Two organic cages, cagearene-1 and cagearene-2, are prepared. The cagearene-1 solid selectively absorbs benzene vapor from a benzene/cyclohexane mixture and is used to achieve temperature-controlled programmed vapor release.

Self-Assembly of a Purely Covalent Cage with Homochirality by Imine Formation in Water

Self-assembly of host molecules in aqueous media via metal-ligand coordination is well developed. However, the preparation of purely covalent counterparts in water has remained a formidable task. An anionic tetrahedron cage was successfully self-assembled in a [4+4] manner by condensing a trisamine and a trisformyl in water. Even although each individual imine bond is rather labile and apt to hydrolyze in water, the tetrahedron is remarkably stable or inert due to multivalence. The tetrahedral cages, as well as its neutral counterparts dissolved in organic solvent, have homochirality, namely that their four propeller-shaped trisformyl residues adopt the same rotational conformation. The cage is able to take advantage of hydrophobic effect to accommodate a variety of guest molecules in water. When a chiral guest was recognized, the formation of one enantiomer of the cage became more favored relative to the other. As a consequence, the cage could be produced in an enantioselective manner. The tetrahedron is able to maintain its chirality after removal of the chiral guest-probably on account of the cooperative occurrence of intramolecular forces that restrict the intramolecular flipping of phenyl units in the cage framework.

Cucurbitimines - imine cages with concave walls

The variety of shape-persistent organic cages by imine bond formation has tremendously enlarged in recent years by using different building blocks (aldehydes and amines) in the condensation reactions. Here, we describe the use of a kinked tetraldehyde to generate pumpkin-shaped cages with concave walls, similar to cucurbiturils.

Kinked tetraaldehyde building blocks lead in condensation reactions with diamines to pumpkin shaped cages – the cucurbitimines.

Soluble Congeners of Prior Insoluble Shape-Persistent Imine Cages

One of the most applied reaction types to synthesize shape‐persistent organic cage compounds is the imine condensation reaction and it is assumed that the formed cages are thermodynamically controlled products due to the reversibility of the imine condensation. However, most of the synthesized imine cages reported are formed as precipitate from the reaction mixture and therefore rather may be kinetically controlled products. There are even examples in literature, where resulting cages are not soluble at all in common organic solvents to characterize or study their formation by NMR spectroscopy in solution. Here, a triptycene triamine containing three solubilizing n‐hexyloxy chains has been used to synthesize soluble congeners of prior insoluble cages. This allowed us to study the formation as well as the reversibility of cage formation in solution by investigating exchange of building blocks between the cages and deuterated derivatives thereof.

Chiral Self-sorting of Giant Cubic [8+12] Salicylimine Cage Compounds

Chiral self-sorting is intricately connected to the complicated chiral processes observed in nature and no artificial systems of comparably complexity have been generated by chemists. However, only a few examples of purely organic molecules have been reported so far, where the self-sorting process could be controlled. Herein, we describe the chiral self-sorting of large cubic [8+12] salicylimine cage compounds based on a chiral TBTQ precursor. Out of 23 possible cage isomers only the enantiopure and a meso cage were observed to be formed, which have been unambiguously characterized by single crystal X-ray diffraction. Furthermore, by careful choice of solvent the formation of meso cage could be controlled. With internal diameters of din =3.3-3.5 nm these cages are among the largest organic cage compounds characterized and show very high specific surface areas up to approx. 1500 m2  g-1 after desolvation.

Porous shape-persistent rylene imine cages with tunable optoelectronic properties and delayed fluorescence

A simultaneous combination of porosity and tunable optoelectronic properties, common in covalent organic frameworks, is rare in shape-persistent organic cages. Yet, organic cages offer important molecular advantages such as solubility and modularity. Herein, we report the synthesis of a series of chiral imine organic cages with three built-in rylene units by means of dynamic imine chemistry and we investigate their textural and optoelectronic properties. Thereby we demonstrate that the synthesized rylene cages can be reversibly reduced at accessible potentials, absorb from UV up to green light, are porous, and preferentially adsorb CO2 over N2 and CH4 with a good selectivity. In addition, we discovered that the cage incorporating three perylene-3,4:9,10-bis(dicarboximide) units displays an efficient delayed fluorescence. Time-correlated single photon counting and transient absorption spectroscopy measurements suggest that the delayed fluorescence is likely a consequence of a reversible intracage charge-separation event. Rylene cages thus offer a promising platform that allows combining the porosity of processable materials and photochemical phenomena useful in diverse applications such as photocatalysis or energy storage.

Organic cage supported metal nanoparticles for applications

Porous shape-persistent organic cages can anchor metal nanoparticles either inside the cavity or in the external cavity generated through self-assembly. The size of these nanoparticles range from 1-2 nm depending upon the host and can be controlled within a narrow size distribution. The nanoparticles thus formed are quite stable as they are segregated efficiently preventing their association and eventual precipitation. These fine nanoparticles are found to be quite effective in catalyzing a number of organic transformations besides showing interesting emission properties.

Molecular control over vitrimer-like mechanics - tuneable dynamic motifs based on the Hammett equation in polyimine materials

In this work, we demonstrate that fine-grained, quantitative control over macroscopic dynamic material properties can be achieved using the Hammett equation in tuneable dynamic covalent polyimine materials. Via this established physical-organic principle, operating on the molecular level, one can fine-tune and control the dynamic material properties on the macroscopic level, by systematic variation of dynamic covalent bond dynamics through selection of the appropriate substituent of the aromatic imine building blocks. Five tuneable, crosslinked polyimine network materials, derived from dianiline monomers with varying Hammett parameter (σ) were studied by rheology, revealing a distinct correlation between the σ value and a range of corresponding dynamic material properties. Firstly, the linear correlation of the kinetic activation energy (E a) for the imine exchange to the σ value, enabled us to tune the E a from 16 to 85 kJ mol-1. Furthermore, the creep behaviour (γ), glass transition (T g) and the topology freezing transition temperature (T v), all showed a strong, often linear, dependence on the σ value of the dianiline monomer. These combined results demonstrate for the first time how dynamic material properties can be directly tuned and designed in a quantitative - and therefore predictable - manner through correlations based on the Hammett equation. Moreover, the polyimine materials were found to be strong elastic rubbers (G' > 1 MPa at room temperature) that were stable up to 300 °C, as confirmed by TGA. Lastly, the dynamic nature of the imine bond enabled not only recycling, but also intrinsic self-healing of the materials over multiple cycles without the need for solvent, catalysts or addition of external chemicals.

A Robust Porous Quinoline Cage: Transformation of a [4+6] Salicylimine Cage by Povarov Cyclization

Porous shape-persistent organic cages have become the object of interest in recent years because they are soluble and thus processable from solution. A variety of cages can be achieved by applying dynamic covalent chemistry (DCC), but they are less chemically stable. Here the transformation of a salicylimine cage into a quinoline cage by a twelve-fold Povarov reaction as the key step is described. Besides the chemical stability of the cage over a broad pH regime, it shows a unique absorption and emission depending on acid concentration. Furthermore, thin films for the vapor detection of acids were investigated, showing color switches from pale-yellow to red, and characteristic emission profiles.

Examination of the Dynamic Covalent Chemistry of [2 + 3]-Imine Cages

The synthesis of shape-persistent organic cage compounds by the formation of imine bonds opens the possibility to realize cages of different sizes, geometries, topologies, and functions. It is generally assumed that the imine bond is rather chemically labile allowing a self-correction mechanism until thermodynamic equilibrium is reached, which is often the case if a cage is formed. However, there are some contradictory experimental data to this assumption. To get a deeper insight into the imine bond dynamics of covalent organic cages, we studied the formation and exchange of both dialdehydes and triamines of two different [2 + 3] imine cages with the aid of a deuterated dialdehyde molecular building block.

Multicomponent Metallo-Supramolecular Nanocapsules Assembled from Calix[4]resorcinarene-Based Terpyridine Ligands

Tetrafunctionalized calix[4]resorcinarene cavitands commonly serve as supramolecular scaffolds for construction of coordination-driven self-assembled capsules. However, due to the calix-like shape, the structural diversity of assemblies is mostly restricted to dimeric and hexameric capsules. Previously, we reported a spontaneous heteroleptic complexation strategy based on a pair of self-recognizable terpyridine-based ligands and Cd^II ions. Building on this complementary ligand pairing system, herein three types of nanocapsules, including a dimeric capsule, a Sierpiński triangular prism, and a cubic star, could be readily obtained through dynamic complexation reactions between a tetratopic cavitand-based ligand and various multitopic counterparts in the presence of Cd^II ions. The dimeric capsular assemblies display the spacer-length-dependent self-sorting behavior in a four-component system. Moreover, the precise multicomponent self-assembly of a Sierpiński triangular prism and a cubic star possessing three and six cavitand-based motifs, respectively, demonstrates that such self-assembly methodology is able to efficiently enhance architectural complexity for calix[4]resorcinarene-containing metallo-supramolecules.

Host-Guest Chemistry of Truncated Tetrahedral Imine Cages with Ammonium Ions

Three shape-persistent [4+4] imine cages with truncated tetrahedral geometry with different window sizes were studied as hosts for the encapsulation of tetra-n-alkylammonium salts of various bulkiness. In various solvents the cages behave differently. For instance, in dichloromethane the cage with smallest window size takes up NEt4+ but not NMe4+, which is in contrast to the two cages with larger windows hosting both ions. To find out the reason for this, kinetic experiments were carried out to determine the velocity of uptake but also to deduce the activation barriers for these processes. To support the experimental results, calculations for the guest uptakes have been performed by molecular mechanics' simulations. Finally, the complexation of pharmaceutical interested compounds, such as acetylcholine, muscarine or denatonium have been determined by NMR experiments.

Transformation of a [4+6] Salicylbisimine Cage to Chemically Robust Amide Cages

In recent years, interest in shape-persistent organic cage compounds has steadily increased, not least because dynamic covalent bond formation enables such structures to be made in high to excellent yields. One often used type of dynamic bond formation is the generation of an imine bond from an aldehyde and an amine. Although the reversibility of the imine bond formation is advantageous for high yields, it is disadvantageous for the chemical stability of the compounds. Amide bonds are, in contrast to imine bonds much more robust. Shape-persistent amide cages have so far been made by irreversible amide bond formations in multiple steps, very often accompanied by low yields. Here, we present an approach to shape-persistent amide cages by exploiting a high-yielding reversible cage formation in the first step, and a Pinnick oxidation as a key step to access the amide cages in just three steps. These chemically robust amide cages can be further transformed by bromination or nitration to allow post-functionalization in high yields. The impact of the substituents on the gas sorption behavior was also investigated.

Fully Collapsed Imploded Cryptophanes in Solution and in the Solid State

Cryptophanes with flexible linkers derived from (±)-tris-(4-formyl-phenyl)-cyclotriguaiacylene with either bisoxydi(ethylamine) or bis(aminopropyl)ether were isolated as single crystals, the crystal structures of which showed the proposed, but previously uncharacterised, out-in conformation, in which both cyclotriguaiacylene fragments adopt a crown conformation with one crown sitting inside the other. The usual cage-like out-out conformation of the cryptophanes was observed when crystals were dissolved upon heating, and the molecules collapsed back to the out-in isomers over time. In contrast, a cryptophane also derived from (±)-tris-(4-formyl-phenyl)-cyclotriguaiacylene but with rigid dibenzalhydrazine linkers was isolated as the more usual out-out isomer.

Cage Based Crystalline Covalent Organic Frameworks

The first two cage based crystalline covalent organic frameworks, cage-COF-1 and cage-COF-2, were constructed from a prism-like three-aldehyde-containing molecular cage. The cage contains two horizontal phloroglucinol and three vertical triazine moieties forming three identical V-shaped cavities. By reacting with p-phenylenediamine and 4,4'-biphenyldiamine, the two cage-COFs were formed with a hexagonal skeleton and possess a unique structure. Due to the pillared cage nodes, the linkers are hanging with their π-surfaces but not C-H sites exposed to the pore, and enjoy certain rotational dynamics as suggested by ¹³C CP/MAS NMR. The antidirection of the diimine linkages leads to rippled layers which pack in unique ABC mode through alternate stacking of the cage twosided faces in both AB and AC layers. Such packing forms trigonal channels along c axis which are interconnected in ab plane due to the large open space created across the hanging linkers, resembling the porous characteristics of 3D COFs. The cage-COFs have a permanent porosity and can adsorb CO₂ facilitated by the intrinsic cage cavities that serve as prime adsorption sites. The unprecedented cage-COFs not only merge the borderline of 2D and 3D COFs but also bridge porous organic cages to extended crystalline organic frameworks.

Shape-persistent pyrrole-based covalent organic cages: synthesis, structure and selective gas adsorption properties

Two cryptand-like, shape persistent [2+3] imine cages (1 and 2) derived from oligopyrrolic precursors (diformyl dipyrrylpyridine 3 and diformyl bipyrrole 4) were prepared. These cages contain open cavities as inferred from solid state structural analyses and act as selective CO2 gas adsorbing materials in the solid state.

Hydrogen-bonded six-component assembly for capsule formation based on tetra(4-pyridyl)cavitand and isophthalic acid linker and its application to photoresponsive capsule

Two molecules of tetra(4-pyridyl)cavitand 1 and four molecules of isophthalic acid linker 2a with a triethylene glycol monomethyl ether (TEG) group self-assembled into a six-component capsule 1₂·2a₄ through eight pyNHO₂C hydrogen bonds, which encapsulates one molecule of guest G such as bis(4-acetoxyphenyl)acetylene and hexakis(4-iodophenyl)benzene to form G@(1₂·2a₄). Guest-encapsulation ability and selectivity of 1₂·2a₄ were revealed. trans-5-(p-Substituted-phenylazo)isophthalic acid with two dichotomous branching TEG groups trans-2b serves as a photoresponsive linker to form 1₂·(trans-2b)₄, which moderately reduced guest-encapsulation ability upon photoisomerization (at the photostationary state, 10% guest release upon subunit-trans-2b/subunit-cis-2b = 18 : 82).

Template-Directed Synthesis of a Conjugated Zinc Porphyrin Nanoball

We report the template-directed synthesis of a π-conjugated 14-porphyrin nanoball. This structure consists of two intersecting nanorings containing six and 10 porphyrin units. Fluorescence upconversion spectroscopy experiments demonstrate that electronic excitation delocalizes over the whole three-dimensional π system in less than 0.3 ps if the nanoball is bound to its templates or over 2 ps if the nanoball is empty.

Shape-Persistent [4+4] Imine Cages with a Truncated Tetrahedral Geometry

The synthesis of shape-persistent organic cage compounds is often based on the usage of multiple dynamic covalent bond formation (such as imines) of readily available precursors. By careful choice of the precursors geometry, the geometry and size of the resulting cage can be accurately designed and indeed a number of different geometries and sizes have been realized to date. Despite of this fact, little is known about the precursors conformational rigidity and steric preorganization of reacting functional groups on the outcome of the reaction. Herein, the influence of conformational rigidity in the precursors on the formation of a [4+4] imine cage with truncated tetrahedral geometry is discussed.

Template-directed self-assembly of dynamic covalent capsules with polar interiors

Chiral polyimine molecular capsules with polar interiors have been prepared through template covalent dynamic self-assembly. An aryl-extended tetraaldehyde calix[4]pyrrole scaffold was condensed with suitable diamines as linkers using templates for efficient self-assembly. The capsular complexes were characterized in solution, gas phase and the solid-state. Unprecedented transfer of asymmetry was observed from a chiral diamine linker to the resulting supramolecular capsular assembly.

A Three-Dimensionally π-Conjugated Diradical Molecular Cage

π-Conjugated molecular cages are very challenging targets in structural organic chemistry, supramolecular chemistry, and materials science. The synthesis and physical characterizations are reported of the first three-dimensionally π-conjugated diradical molecular cage PTM-C, in which two polychlorotriphenylmethyl (PTM) radicals are linked by three bis(3,6-carbazolyl) bridges. This cage compound was synthesized mainly by intermolecular Yamamoto coupling followed by deprotonation and oxidation. It is stable and its structure was confirmed by X-ray crystallographic analysis. The two carbon-centered PTM radicals are weakly coupled through electronic interactions with the carbazole spacers, as revealed by optical, electronic, and magnetic measurements as well as theoretical calculations.

Light-responsive molecular containers

This review highlights relevant studies of light-controlled molecular containers able to catch and release small molecules.

Exploring the gem-dimethyl effect in the formation of imine-based macrocycles and cages

A series of imine-based macrocycles and cages has been synthesized using the gem-dimethyl effect as a platform. Following this strategy, imine-based macrocyclization could be performed even at higher concentration.

Incarceration of Higher-Order Fullerenes within Cyclotriveratrylene-Based Hemicarcerands Allows Selective Isolation of C76 , C78 , and C84 from a Commercial Fullerene Mixture

Size-complementary cyclotriveratrylene (CTV)-based hosts can incarcerate C₇₆ , C₇₈ , and C₈₄ , thus allowing the selective isolation of these higher-order fullerenes from a commercially available mixture of fullerenes. The hemicarceplexes, formed after the encapsulation of the size-complementary fullerenes within the hosts, are isolated by column chromatography and released at elevated temperature, thereby leading to the isolation of C₇₆ /C₇₈ and C₈₄ in good purities (up to 95 and 88 %, respectively).

Chiral, triformylphenol-derived salen-type [4 + 6] organic cages

A one-pot synthesis of chiral [4 + 6] tetrahedral cage compounds containing a salen fragment on each face is presented. The formation of the [4 + 6] products remains in contrast to the reaction of 1,3,5-triformylphloroglucinol with chiral diamines where [2 + 3] keto-enamine pseudocyclophanes are formed exclusively. The presence of OH groups determines the structural and spectroscopic properties of these cage compounds while a change in the reaction conditions facilitates the isolation of the microcrystalline products of the specific surface area varying from 5 to 578 m(2) g(-1).