Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation

My Struggles and Dreams as a Chemical Engineer

My career has not been straightforward. Although I am a chemical engineer, and I'm proud of that, I took a path from chemistry and engineering to one that also involved experimental biology and medicine. This was very unusual many decades ago. In so doing, I met with rejection and ridicule early in my career. However, by going down that path, I was able to make discoveries and inventions that I hope have saved and improved lives, and I've been able to train a great number of people who are going down the road I began traveling over many years ago.

Effects of aligned PLGA/SrCSH composite scaffolds on in vitro growth and osteogenic differentiation of human mesenchymal stem cells

Strontium (Sr) has important functions in bone remodeling. Incorporating strontium-doped α-calcium sulfate hemihydrate (SrCSH) into poly(lactic-co-glycolic acid) (PLGA) fibrous scaffolds were expected to increase its bio-activity and provide a potential material for bone tissue engineering. In the present study, Sr-containing aligned PLGA/SrCSH fibrous scaffolds similar to the architecture of natural bone were prepared via wet spinning. CCK-8 assay revealed that Sr-containing scaffolds possessed better bioactivity and supported favorable cell growth effectively. The aligned PLGA/SrCSH fibers exerted a contact effect on cell attachment, inducing regular cell alignment and influencing a series of cell behaviors. Releasing of high concentration Sr from a-PLGA/SrCSH scaffolds could induce high expression levels of BMP-2, increase ALP activity and upregulate RUNX-2 expression, and further promote the expressions of COL-I and OCN and the maximum mineralization. This study demonstrated that Sr and ordered structure in a-PLGA/SrCSH fibrous scaffolds could synergistically enhance the osteogenic differentiation of umbilical cord mesenchymal stem cells (UCMSCs) by regulating cell arrangement and expressions of osteogenic genes.

Elastomeric Polyesters in Cardiovascular Tissue Engineering and Organs-on-a-Chip

Cardiovascular tissue constructs provide unique design requirements due to their functional responses to substrate mechanical properties and cyclic stretching behavior of cardiac tissue that requires the use of durable elastic materials. Given the diversity of polyester synthesis approaches, an opportunity exists to develop a new class of biocompatible, elastic, and immunomodulatory cardiovascular polymers. Furthermore, elastomeric polyester materials have the capability to provide tailored biomechanical synergy with native tissue and hence reduce inflammatory response in vivo and better support tissue maturation in vitro. In this review, we highlight underlying chemistry and design strategies of polyester elastomers optimized for cardiac tissue scaffolds. The major advantages of these materials such as their tunable elasticity, desirable biodegradation, and potential for incorporation of bioactive compounds are further expanded. Unique fabrication methods using polyester materials such as micromolding, 3D stamping, electrospinning, laser ablation, and 3D printing are discussed. Moreover, applications of these biomaterials in cardiovascular organ-on-a-chip devices and patches are analyzed. Finally, we outline unaddressed challenges in the field that need further study to enable the impactful translation of soft polyesters to clinical applications.

Strategies for Development of Synthetic Heart Valve Tissue Engineering Scaffolds

The current clinical solutions, including mechanical and bioprosthetic valves for valvular heart diseases, are plagued by coagulation, calcification, nondurability, and the inability to grow with patients. The tissue engineering approach attempts to resolve these shortcomings by producing heart valve scaffolds that may deliver patients a life-long solution. Heart valve scaffolds serve as a three-dimensional support structure made of biocompatible materials that provide adequate porosity for cell infiltration, and nutrient and waste transport, sponsor cell adhesion, proliferation, and differentiation, and allow for extracellular matrix production that together contributes to the generation of functional neotissue. The foundation of successful heart valve tissue engineering is replicating native heart valve architecture, mechanics, and cellular attributes through appropriate biomaterials and scaffold designs. This article reviews biomaterials, the fabrication of heart valve scaffolds, and their in-vitro and in-vivo evaluations applied for heart valve tissue engineering.

Advancements and Utilizations of Scaffolds in Tissue Engineering and Drug Delivery

The drug development process requires a thorough understanding of the scaffold and its three-dimensional structure. Scaffolding is a technique for tissue engineering and the formation of contemporary functioning tissues. Tissue engineering is sometimes referred to as regenerative medicine. They also ensure that drugs are delivered with precision. Information regarding scaffolding techniques, scaffolding kinds, and other relevant facts, such as 3D nanostructuring, are discussed in depth in this literature. They are specific and demonstrate localized action for a specific reason. Scaffold's acquisition nature and flexibility make it a new drug delivery technology with good availability and structural parameter management.

Improved cell proliferation and testosterone secretion following exposure of TM3 Leydig cells to three-dimensional scaffold and light emitting diode

Green LED and three-dimensional (3D) scaffolds have recently received extensive attentions due to their impact on cell proliferation and differentiation. Melatonin, a circadian rhythm-regulating hormone, is involved in some physiological phenomena including testosterone biosynthesis. Lower testosterone biosynthesis results in some disorders such as puberty retarding, andropause, and muscle weakness. Therefore, our aim was to investigate the proliferation of Leydig cells and their testosterone-related Gene expression and secretion under the influence of 3D scaffold, green light and melatonin. The experimental groups of TM3 cells embedded in the 3D scaffold, were exposed to green light, melatonin, both and all three factors. Expression of cell cycle genes including PCNA, CYCLIND1, CDC2 and CDKN1B, and testosterone related genes; GATA4 and RORα were also examined. 3D scaffold enhanced Leydig cells proliferation, and testosterone-related genes expression. While melatonin decreased cell proliferation and testosterone-related genes expression. Green light did not significantly change the results but slightly decreased cell proliferation and testosterone synthesis. The combination of green light with melatonin significantly reduced the proliferation rate of TM3 cells and the expression of steroidogenic genes, while the combination of green light with scaffold improved the results. In general, the use of scaffolding enhances proliferation and testosterone-related genes expression of TM3 Leydig cells. Also, application of green light and scaffolding reduces the deleterious effects of melatonin on these cells.

A combination of polyglycolic acid fabric and fibrin glue prevents air leakage from a lung defect

OBJECTIVES

Air leakage after lung resection is a common morbidity that may lengthen hospital stay. Applying sealant to a lesion is an effective prophylaxis in clinical practice. This study aimed to examine the effect of a combination of a bioabsorbable polyglycolic acid (PGA) fabric and fibrin glue (FG) on air sealing by measuring the in vitro mechanical strength and degradation of the fabric, and in vivo histological changes after implantation.

METHODS

A defect was created in the canine left upper lung lobe, and then filled with a fibrinogen solution and covered with a PGA sheet spray-coated with fibrinogen and thrombin. After 1 and 4 weeks, air leakage from the lesion was examined in vivo under airway pressure. Tissue samples were harvested for histological assessment.

RESULTS

The mechanical strength of the PGA fabric remained at 80-90% of the baseline level for 1 week in phosphate-buffered saline, and then rapidly decreased to zero thereafter. Air leakage from the lung defect was prevented by the combination of PGA fabric and FG at 1 and 4 weeks. Histological examinations showed that PGA bundles persisted with a non-specific inflammatory response for 2 weeks and then gradually broke into sparse yarns surrounded by collagen fibres and capillaries by 8 weeks. The lung defect was filled with FG at 1 week and by granulation tissue thereafter.

CONCLUSIONS

These results provide evidence for the efficacy of a combination of PGA fabric and FG for the prevention of air leakage in the critical period after lung surgery.

Osteoblasts in a Perfusion Flow Bioreactor-Tissue Engineered Constructs of TiO2 Scaffolds and Cells for Improved Clinical Performance

Combining biomaterial scaffolds with cells serves as a promising strategy for engineering critical size defects; however, homogenous cellular growth within large scaffolds is challenging. Mechanical stimuli can enhance bone regeneration by modulating cellular growth and differentiation. Here, we compare dynamic seeding in a perfusion flow bioreactor with static seeding for a synthetic bone scaffold for up to 21 days using the cell line MC3T3-E1 and primary human osteoblast, confocal laser scanning microscopy, and real-time reverse transcriptase-polymerase chain reaction. The secretion of bone-related proteins was quantified using multiplex immunoassays. Dynamic culture improved cellular distribution through the TiO2 scaffold and induced a five-fold increase in cell number after 21 days. The relative mRNA expression of osteopontin of MC3T3-E1 was 40-fold enhanced after 7 and 21 days at a flow rate of 0.08 mL/min, and that of collagen type I alpha I expression was 18-fold after 21 days. A flow rate of 0.16 mL/min was 10-fold less effective. Dynamic culture increased the levels of dickkopf-related protein 1 (60-fold), osteoprotegrin (29-fold), interleukin-6 (23-fold), interleukin-8 (36-fold), monocyte chemoattractant protein 1 (28-fold) and vascular endothelial growth factor (6-fold) in the medium of primary human osteoblasts after 21 days compared to static seeding. The proposed method may have clinical potential for bone tissue engineering.

Biocompatible Synthetic Polymers for Tissue Engineering Purposes

Synthetic polymers have been an integral part of modern society since the early 1960s. Besides their most well-known applications to the public, such as packaging, construction, textiles and electronics, synthetic polymers have also revolutionized the field of medicine. Starting with the first plastic syringe developed in 1955 to the complex polymeric materials used in the regeneration of tissues, their contributions have never been more prominent. Decades of research on polymeric materials, stem cells, and three-dimensional printing contributed to the rapid progress of tissue engineering and regenerative medicine that envisages the potential future of organ transplantations. This perspective discusses the role of synthetic polymers in tissue engineering, their design and properties in relation to each type of application. Additionally, selected recent achievements of tissue engineering using synthetic polymers are outlined to provide insight into how they will contribute to the advancement of the field in the near future. In this way, we aim to provide a guide that will help scientists with synthetic polymer design and selection for different tissue engineering applications.

The challenges and prospects of Escherichia coli as an organic acid production host under acid stress

OBJECTIVE

Organic acids have a wide range of applications and have attracted the attention of many industries, and their large-scale applications have led fermentation production to low-cost development. Among them, the microbial fermentation method, especially using Escherichia coli as the production host, has the advantages of fast growth and low energy consumption, and has gradually shown better advantages and prospects in organic acid fermentation production.

IMPORTANCE

However, when the opportunity comes, the acidified environment caused by the acid products accumulated during the fermentation process also challenges E. coli. The acid sensitivity of E. coli is a core problem that needs to be solved urgently. The addition of neutralizers in traditional operations led to the emergence of osmotic stress inadvertently, the addition of strong acid substances to recover products in the salt state not only increases production costs, but the discharged sewage is also harmful to the environment.

ELABORATION

This article summarizes the current status of the application of E. coli in the production of organic acids, and based on the impact of acid stress on the physiological state of cells and the impact of industrial production profits, put forward some new conjectures that can make up for the deficiencies in existing research and application.

IMPLICATION

At this point, the diversified transformation of E. coli has become a chassis microbe that is more suitable for industrial fermentation, enhancing industrial application value.

KEY POINTS

• E. coli is a potential host for high value-added organic acids production. • Classify the damage mechanism and coping strategies of E. coli when stimulated by acid molecules. • Multi-dimensional expansion tools are needed to create acid-resistant E. coli chassis.

Applications of nanotechnology in 3D printed tissue engineering scaffolds

Tissue engineering is an interdisciplinary field that aims to combine life sciences and engineering to create therapies that regenerate functional tissue. Early work in tissue engineering mostly used materials as inert scaffolding structures, but research has shown that constructing scaffolds from biologically active materials can help with regeneration by enabling cell-scaffold interactions or release of factors that aid in regeneration. Three-dimensional (3D) printing is a promising technique for the fabrication of structurally intricate and compositionally complex tissue engineering scaffolds. Such scaffolds can be functionalized with techniques developed by nanotechnology research to further enhance their ability to stimulate regeneration and interact with cells. Nanotechnological components, nanoscale textures, and microscale/nanoscale printing can all be incorporated into the manufacture of 3D printed scaffolds. This review discusses recent advancements in the merging of nanotechnology with 3D printed tissue engineering scaffolds, with a focus on applications of nanoscale components, nanoscale texture, and innovative printing techniques and the effects observed in vitro and in vivo.

Highly Permeable Gelatin/Poly(lactic acid) Fibrous Scaffolds with a Three-Dimensional Spatial Structure for Efficient Cell Infiltration, Mineralization and Bone Regeneration

Three-dimensional (3D) fibrous scaffolds allowing sufficient cell infiltration are urgently needed for bone tissue engineering. In this study, a highly permeable 3D interconnected scaffold was fabricated by surface bonding of cotton-like nonwoven fibers with micro- and nanoscale architecture using gaseous chloroform. The results of physiochemical characterization indicated that bonding for 90 min with a fiber density of 0.15 g/cm³ could facilitate satisfactory porosity, supportive mechanical properties, and a 3D spatial microstructure for cell ingrowth. Coating with gelatin on the fibers induced highly efficient in vitro mineralization and in vivo bone formation as indicated by mineral deposition and repair of rabbit radius bone defect. The findings from this work demonstrated that these biofunctionalized fibrous scaffolds could bionically represent topographic nanofeatures and biological composition for cell binding affinities similar to those of the natural extracellular matrix (ECM). It can be concluded that the facile fabrication and modification strategy of 3D fibrous scaffolds exhibit promising prospect to fulfill the progressive needs in bone tissue engineering.

Biodegradable Polylactide Scaffolds with Pharmacological Activity by Means of Ultrasound Micromolding Technology

Ultrasound micromolding technology has been applied to get microporous polylactide scaffolds from the subsequent leaching of incorporated NaCl salts. A small amount of water-soluble polyethylene glycol (PEG) was required in order to improve the leaching process and get compact pieces with interconnected pores. Distribution of polymers in the processed specimens was quite homogeneous due to the small PEG content, although it was more concentrated in the regions close to the feeding channels due to its higher viscosity. Hydrophobic drugs like triclosan could be incorporated causing a minimum degradation during ultrasound processing and suffering an insignificant solubilization during the leaching step. Final scaffolds showed clear bactericide or bacteriostatic effects before and after 10 h of exposure. Cell proliferation of MDCK epithelial cells was higher for TCS loaded porous scaffolds (200%) than for unloaded samples (170%) and non-porous polylactide (PLA) specimens (100%, control). Micrographs showed the absence of non-inhibition areas in both the specimens and the container, confirming the biocompatibility of PLA specimens.

Biofabrication for neural tissue engineering applications

Unlike other tissue types, the nervous tissue extends to a wide and complex environment that provides a plurality of different biochemical and topological stimuli, which in turn defines the advanced functions of that tissue. As a consequence of such complexity, the traditional transplantation therapeutic methods are quite ineffective; therefore, the restoration of peripheral and central nervous system injuries has been a continuous scientific challenge. Tissue engineering and regenerative medicine in the nervous system have provided new alternative medical approaches. These methods use external biomaterial supports, known as scaffolds, to create platforms for the cells to migrate to the injury site and repair the tissue. The challenge in neural tissue engineering (NTE) remains the fabrication of scaffolds with precisely controlled, tunable topography, biochemical cues, and surface energy, capable of directing and controlling the function of neuronal cells toward the recovery from neurological disorders and injuries. At the same time, it has been shown that NTE provides the potential to model neurological diseases in vitro, mainly via lab-on-a-chip systems, especially in cases for which it is difficult to obtain suitable animal models. As a consequence of the intense research activity in the field, a variety of synthetic approaches and 3D fabrication methods have been developed for the fabrication of NTE scaffolds, including soft lithography and self-assembly, as well as subtractive (top-down) and additive (bottom-up) manufacturing. This article aims at reviewing the existing research effort in the rapidly growing field related to the development of biomaterial scaffolds and lab-on-a-chip systems for NTE applications. Besides presenting recent advances achieved by NTE strategies, this work also delineates existing limitations and highlights emerging possibilities and future prospects in this field.

Biomimetic hybrid scaffold consisting of co-electrospun collagen and PLLCL for 3D cell culture

Electrospun collagen is commonly used as a scaffold in tissue engineering applications since it mimics the content and morphology of native extracellular matrix (ECM) well. This report describes "toxic solvent free" fabrication of electrospun hybrid scaffold consisting of Collagen (Col) and Poly(l-lactide-co-ε-caprolactone) (PLLCL) for three-dimensional (3D) cell culture. Biomimetic hybrid scaffold was fabricated via co-spinning approach where simultaneous electrospinning of PLLCL and Collagen was mediated by polymer sacrificing agent Polyvinylpyrrolidone (PVP). Acidified aqueous solution of PVP was used to solubilize collagen without using toxic solvents for electrospinning, and then PVP was readily removed by rinsing in water. Mechanical characterizations, protein adsorption, as well as biodegradation analysis have been conducted to investigate feasibility of biomimetic hybrid scaffold for 3D cell culture applications. Electrospun biomimetic hybrid scaffold, which has 3D-network structure with 300-450 nm fiber diameters, was found to be maximizing cell adhesion through assisting NIH 3T3 mouse fibroblast cells. 3D cell culture studies confirmed that presence of collagen in biomimetic hybrid scaffold have created a major impact on cell proliferation compared to conventional 2D systems on long-term, also cell viability increased with the increasing amount of collagen.

Chemical and Biological Approaches to Regenerative Medicine and Tissue Engineering

The loss or failure of an organ or tissue is one of the most frequent, devastating, and costly problems in human healthcare. The areas of regenerative medicine and tissue engineering apply the principles of chemistry, biology, and engineering to create new tissues and organs. Here we discuss some of the early work in this field and, in particular, review our studies combining chemistry, materials science, biology, and engineering to create new tissues and organs.

A laser-cutting-based manufacturing process for the generation of three-dimensional scaffolds for tissue engineering using Polycaprolactone/Hydroxyapatite composite polymer

A manufacturing process for sheet-based stacked scaffolds (SSCs) based on laser-cutting (LC) was developed. The sheets consist of Polycaprolactone/Hydroxyapatite (PCL/HA) composite material. Single sheets were cut from a PCL/HA foil and stacked to scaffolds with interconnecting pores of defined sizes. HA quantities up to 50% were processable with high reproducibility, while the accuracy was dependent on the applied laser power. The smallest achievable pore sizes were about 40 µm, while the smallest stable solid structures were about 125 µm. The human mesenchymal stem cell line SCP-1 was cultured on the manufactured PCL/HA scaffolds. The cells developed a natural morphology and were able to differentiate to functional osteoblasts. The generation of PCL/HA SSCs via LC offers new possibilities for tissue engineering (TE) approaches. It is reliable and fast, with high resolution. The SSC approach allows for facile cell seeding and analysis of cell fate within the three-dimensional cell culture, thus allowing for the generation of functional tissue constructs.

Poly(propylene fumarate)-based materials: Synthesis, functionalization, properties, device fabrication and biomedical applications

Poly(propylene fumarate) (PPF) is a biodegradable polymer that has been investigated extensively over the last three decades. It has led many scientists to synthesize and fabricate a variety of PPF-based materials for biomedical applications due to its controllable mechanical properties, tunable degradation and biocompatibility. This review provides a comprehensive overview of the progress made in improving PPF synthesis, resin formulation, crosslinking, device fabrication and post polymerization modification. Further, we highlight the influence of these parameters on biodegradation, biocompatibility, and their use in a number of regenerative medicine applications, especially bone tissue engineering. In particular, the use of 3D printing techniques for the fabrication of PPF-based scaffolds is extensively reviewed. The recent invention of a ring-opening polymerization method affords precise control of PPF molecular mass, molecular mass distribution (Ɖ_M) and viscosity. Low Ɖ_M facilitates time-certain resorption of 3D printed structures. Novel post-polymerization and post-printing functionalization methods have accelerated the expansion of biomedical applications that utilize PPF-based materials. Finally, we shed light on evolving uses of PPF-based materials for orthopedics/bone tissue engineering and other biomedical applications, including its use as a hydrogel for bioprinting.

Osteogenic differentiation of preconditioned bone marrow mesenchymal stem cells with lipopolysaccharide on modified poly-l-lactic-acid nanofibers

Tissue engineering is an interdisciplinary expertise that involves the use of nanoscaffolds for repairing, modifying, and removing tissue defects and formation of new tissues. Mesenchymal stem cells (MSCs) can differentiate into a variety of cell types, and they are attractive candidates for tissue engineering. In the current study, the electrospinning process was used for nanofiber preparation, based on a poly-l-lactic-acid (PLLA) polymer. The surface was treated with O ₂ plasma to enhance hydrophilicity, cell attachment, growth, and differentiation potential. The nanoscaffolds were preconditioned with lipopolysaccharide (LPS) to enhance induction of differentiation. The nanoscaffolds were categorized by contact angle measurements and scanning electron microscopy. The MTT assay was used to analyze the rate of growth and proliferation of cells. Osteogenic differentiation of cultured MSCs was evaluated on nanofibers using common osteogenic markers, such as alkaline phosphatase activity, calcium mineral deposition, quantitative real-time polymerase chain reaction, and immunocytochemical analysis. Based on the in vitro results, primed MSCs with LPS on the PLLA nanoscaffold significantly enhanced the proliferation and osteogenesis of MSCs. Also, the combination of LPS and electrospun nanofibers can provide a new and suitable matrix to support stem cells' differentiation for bone tissue engineering.

Fabrication and characterization of the 3D-printed polycaprolactone/fish bone extract scaffolds for bone tissue regeneration

Fish bone extract (FBE) containing a trioligopeptide (FBP-KSA, Lys-Ser-Ala) isolated from Johnius belengerii could induce osteogenic activities on MC3T3-E1 pre-osteoblasts in our previous study. Regarding the osteogenic effect of FBE, in the present study, we fabricated the three-dimensional (3D) interconnected polycaprolactone (PCL)/FBE scaffolds for bone tissue regeneration. After fabrication of PCL scaffolds using 3D printing, FBE was coated on the surface of PCL scaffolds by self-assembly process. In the physical characteristic and mechanical property tests, the results demonstrated that the fabricated scaffolds have the strut diameter (between 340 and 345 μm), pore size (between 470 and 480 μm), porosity (between 50% and 55%), and tensile properties (Young's modulus: 9.18-9.42 MPa; max tensile strengths 82.3-87.4 MPa) were similar to those of PCL scaffold. In the cell proliferation and osteogenic assay, the results showed that PCL/FBE scaffolds could significantly induce cell proliferation, calcium deposition, and the expression of osteogenic phenotype markers such as alkaline phosphatase, osteopontin, osteocalcin, and bone morphogenetic protein-2 in the osteoblasts. These results suggest that FBE-coated PCL scaffolds are promising materials for use in biomedical application to promote bone tissue regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1937-1944, 2019.

Effect of Icariin on Engineered 3D-Printed Porous Scaffolds for Cartilage Repair

In recent times, cartilage defects have been the most common athletic injuries, often leading to dreadful consequences such as osteoarthritis, pain, joint deformities, and other symptoms. It is also evident that damage to articular cartilage is often difficult to recover or self-heal because of poor vascular, nervous, and lymphatic supplies. Moreover, cartilage cells have poor regeneration ability and high maturity. Inspired by these facts and the rapid advances in the field of tissue engineering (TE), we fabricated highly porous three-dimensional (3D) scaffold architectures based on cell-responsive polymeric inks, i.e., sodium alginate and gelatin (SA-Gel, 1:3 ratio), by a novel 3D printing method. Moreover, the effect of various processing parameters was systematically investigated. The printed scaffolds of polymer composites gels with excellent transparency, moderate viscosity, and excellent fluid properties showed good surface morphology, better thermal stability and swelling effect, and unique interconnected porous architectures at the optimized operating parameters. In vitro cell proliferation experiments of these cytocompatible scaffolds showed the excellent adhesion rate and growth behavior of chondrocytes. In addition, the porous architectures facilitated the efficient distribution of cells with only a few remaining on the surface, which was confirmed by confocal laser scanning microscopic (CLSM) observations. Icariin (ICA) addition at a concentration of 10 μg/mL further significantly enhanced the proliferation of chondrocytes. We envision that these cell-responsive polymeric inks in the presence of growth regulators like ICA may have potential in engineering complex tissue constructs toward diverse applications in TE.

A review on fabricating tissue scaffolds using vat photopolymerization

Vat Photopolymerization (stereolithography, SLA), an Additive Manufacturing (AM) or 3D printing technology, holds particular promise for the fabrication of tissue scaffolds for use in regenerative medicine. Unlike traditional tissue scaffold fabrication techniques, SLA is capable of fabricating designed scaffolds through the selective photopolymerization of a photopolymer resin on the micron scale. SLA offers unprecedented control over scaffold porosity and permeability, as well as pore size, shape, and interconnectivity. Perhaps even more significantly, SLA can be used to fabricate vascular networks that may encourage angio and vasculogenesis. Fulfilling this potential requires the development of new photopolymers, the incorporation of biochemical factors into printed scaffolds, and an understanding of the effects scaffold geometry have on cell viability, proliferation, and differentiation. This review compares SLA to other scaffold fabrication techniques, highlights significant advances in the field, and offers a perspective on the field's challenges and future directions.

STATEMENT OF SIGNIFICANCE

Engineering de novo tissues continues to be challenging due, in part, to our inability to fabricate complex tissue scaffolds that can support cell proliferation and encourage the formation of developed tissue. The goal of this review is to first introduce the reader to traditional and Additive Manufacturing scaffold fabrication techniques. The bulk of this review will then focus on apprising the reader of current research and provide a perspective on the promising use of vat photopolymerization (stereolithography, SLA) for the fabrication of complex tissue scaffolds.

Low-Density Open Cellular Sponges as Functional Materials

Low-density macroporous sponges with densities less than 100 mg cm^-3 are both a challenge and an opportunity for advanced chemistry and material science. The challenge lies in the precise preparation of the sponges with property combinations that lead to novel applications. Bottom-up and top-down chemical and engineering methods for the preparation of sponges are a major focus of this Review, with an emphasis on carbon and polymer materials. The light weight, sustainability, breathability, special wetting characteristics, large mass transfer, mechanical stability, and large pore volume are typical characteristics of sponges made of advanced materials and could lead to novel applications. Some selected sponge properties and potential applications are discussed.

Tissue Engineering Functional Gastrointestinal Regions: The Importance of Stem and Progenitor Cells

The intestine shows extraordinary regenerative potential that might be harnessed to alleviate numerous morbid and lethal human diseases. The intestinal stem cells regenerate the epithelium every 5 days throughout an individual's lifetime. Understanding stem-cell signaling affords power to influence the niche environment for growing intestine. The manifold approaches to tissue engineering may be organized by variations of three basic components required for the transplantation and growth of stem/progenitor cells: (1) cell delivery materials or scaffolds; (2) donor cells including adult stem cells, induced pluripotent stem cells, and in vitro expansion of isolated or cocultured epithelial, smooth muscle, myofibroblasts, or nerve cells; and (3) environmental modulators or biopharmaceuticals. Tissue engineering has been applied to the regeneration of every major region of the gastrointestinal tract from esophagus to colon, with scientists around the world aiming to carry these techniques into human therapy.

Induction of Ectopic Bone Formation by Using Human Periosteal Cells in Combination with a Novel Scaffold Technology

Due to their osteogenic germination potential, periosteum-derived osteoprogenitor cells are a potential source for tissue engineering a bone graft that could be used to regenerate skeletal defects. In this study we evaluated if ectopic bone formation could be induced by a construct made of human periosteal cells and a novel scaffold architecture whose mechanical properties are in the range of cancellous bone. Biopsies from human calvarial periosteum were harvested and cells were isolated from the inner cambial layer. Fifty thousand periosteal cells were seeded into the scaffolds measuring 6 × 6 × 2 mm. The cell–scaffold constructs were cultured for a period of 3 weeks prior to implantation into balb C nude mice. Mice were sacrificed and implants were analyzed 6 and 17 weeks postoperatively. Immunohistochemical analysis confirmed the osteoblastic phenotype of the seeded cells. Formation of focal adhesions and stress fibers could be observed in both scaffold architectures. Three-dimensional cell proliferation was observed after 2 weeks of culturing with centripetal growth pattern inside the pore network. The deposition of calcified extracellular matrix was observed after 3 weeks of culturing. In vivo, endochondral bone formation with osteoid production was detectable via von Kossa and Osteocalcin staining after 6 and 17 weeks. Histology and SEM revealed that the entire scaffold/bone grafts were penetrated by a vascular network. This study showed the potential of bone tissue engineering by using human periosteal cells in combination with a novel scaffold technology.

Competent processing techniques for scaffolds in tissue engineering

Engineering a functional tissue ex vivo requires a synchronized effort towards developing technologies for ECM mimicking scaffold and cultivating tissue-specific cells in an integrated and controlled manner. Cell-interactive scaffolds in three dimensions (3D), designed and processed appropriately with an apt biomaterial to yield optimal porosity and mechanical strength is the key in tissue engineering (TE). In order to accomplish these facets in a 3D scaffold, multiple techniques and processes have been explored by researchers all over the world. New techniques offering reasonable flexibility to use blends of different materials for integrated tissue-specific mechanical strength and biocompatibility have an edge over conventional methods. They may allow a combinatorial approach with a mix of materials while incorporating multiple processing techniques for successful creation of tissue-specific ECM mimics. In this review, we analyze the material requirement from different TE perspectives, while discussing pros and cons of advanced fabrication techniques for scale-up manufacturing.

Mechanical and biological investigations of chitosan–polyvinyl alcohol based ZrO2 doped porous hybrid composites for bone tissue engineering applications

Porous bone-like chitosan–PVA–HAP-ZrO₂ composites were developed to achieve suitable tensile strengths, antibacterial properties, and cytocompatibility with MG-63 cells.

Crimped Nanofibrous Biomaterials Mimic Microstructure and Mechanics of Native Tissue and Alter Strain Transfer to Cells

To fully recapitulate tissue microstructure and mechanics, fiber crimping must exist within biomaterials used for tendon/ligament engineering. Existing crimped nanofibrous scaffolds produced via electrospinning are dense materials that prevent cellular infiltration into the scaffold interior. In this study, we used a sacrificial fiber population to increase the scaffold porosity and evaluated the effect on fiber crimping. We found that increasing scaffold porosity increased fiber crimping and ensured that the fibers properly uncrimped as the scaffolds were stretched by minimizing fiber-fiber interactions. Constitutive modeling demonstrated that the fiber uncrimping produced a nonlinear mechanical behavior similar to that of native tendon and ligament. Interestingly, fiber crimping altered strain transmission to the nuclei of cells seeded on the scaffolds, which may account for previously observed changes in gene expression. These crimped biomaterials are useful for developing functional fiber-reinforced tissues and for studying the effects of altered fiber crimping due to damage or degeneration.

Processing and surface modification of polymer nanofibers for biological scaffolds: a review

Polymeric fibrous constructs possess high surface area-to-volume ratios when compared with solid substrates and are quite commonly used as tissue engineering and cell growth scaffolds. An overview of important design and material considerations for fibrous scaffolds as well as an outline of both established and emerging solution- and melt-based fabrication techniques is provided. Innovative post-process surface modification avenues using "click" chemistry with both single and dual active cues as well as gradient cues, which maintain the fibrous structure are described. By combining process parameters with post-process surface modification, researchers have been able to selectively tune cellular response after seeding and culturing on fibrous constructs.