The osteogenic differentiation of mesenchymal stem cells by controlled cell-cell interaction on micropatterned surfaces

A Perforated Plate-Based Cell Showering Device for Uniform Cell Distribution over Various Culture Substrates

Cell distribution is one of the primary factors that can affect cell morphology and behaviors, as it determines cell-cell interactions. Despite the importance of cell distribution, the seeding process of in vitro cell culture still highly relies on the traditional method using manual pipetting. Because manual pipetting cannot ensure a uniform cell distribution and has the possibility of compromising experimental reproducibility, an accurate and systemic seeding method that enables uniform cell seeding over versatile culture substrates is required. Here, we developed a perforated plate-based cell seeding device called the CellShower, which enabled uniform cell seeding over a large area of cell culture substrates. The working principles of the CellShower are based on the laminar filling flow and capillary force in microfluidics, and the design of the CellShower was optimized with numerical simulations. The versatility of the CellShower in view of uniform cell seeding was demonstrated by applying it to various types of culture substrates from a conventional culture dish to culture substrates having nanotopography, porous structures, and 3D concave structures. The CellShower and its operating principles are expected to contribute to enhancing the accuracy and reproducibility of biological experiments.

Osseointegration enhancement by controlling dispersion state of carbonate apatite in polylactic acid implant

Osteoconductive ceramics (OCs) are often used to endow polylactic acid (PLA) with osseointegration ability. Conventionally, OC powder is dispersed in PLA. However, considering cell attachment to the implant, OCs may be more favorable when they exist in the form of aggregations, such as granules, and are larger than the cells rather than being dispersed like a powder. In this study, to clarify the effects of the dispersion state of OCs on the osseointegration ability, carbonate apatite (CAp), a bone mineral analog that is osteoconductive and bioresorbable, powder-PLA (P-PLA), and CAp granule-PLA (G-PLA) composite implants were fabricated via thermal pressing. The powder and granule sizes of CAp were approximately 1 and 300-600 µm, respectively. G-PLA exhibited a higher water wettability and released calcium and phosphate ions faster than P-PLA. When cylindrical G-PLA, P-PLA, and PLA were implanted in rabbit tibial bone defects, G-PLA promoted bone maturation compared to P-PLA and pure PLA. Furthermore, G-PLA bonded directly to the host bone, whereas P-PLA bonded across the osteoid layers. Consequently, the bone-to-implant contact of G-PLA was 1.8- and 5.6-fold higher than those of P-PLA and PLA, respectively. Furthermore, the adhesive shear strength of G-PLA was 1.9- and 3.0-fold higher than those of P-PLA and PLA, respectively. Thus, G-PLA achieved earlier and stronger osseointegration than P-PLA or PLA. The findings of this study highlight the significance of the state of dispersion of OCs in implants as a novel strategy for material development.

Effect of high cyclic hydrostatic pressure on osteogenesis of mesenchymal stem cells cultured in liquefied micro-compartments

Bone resident cells are constantly subjected to a range of distinct mechanical loadings, which generates a complex microenvironment. In particular, hydrostatic pressure (HP) has a key impact on modulation of cell function and fate determination. Although HP is a constant mechanical stimulus, its role in regulating the osteogenesis process within a defined 3D microenvironment has not been comprehensively elucidated. Perceiving how environmental factors regulate the differentiation of stem cells is essential for expanding their regenerative potential. Inspired by the mechanical environment of bone, this study attempted to investigate the influence of different ranges of cyclic HP on human adipose-derived mesenchymal stem cells (MSCs) encapsulated within a compartmentalized liquefied microenvironment. Taking advantage of the liquefied environment of microcapsules, MSCs were exposed to cyclic HP of 5 or 50 MPa, 3 times/week at 37 °C. Biological tests using fluorescence staining of F-actin filaments showed a noticeable improvement in cell-cell interactions and cellular network formation of MSCs. These observations were more pronounced in osteogenic (OST) condition, as confirmed by fluorescent staining of vinculin. More interestingly, there was a significant increase in alkaline phosphatase activity of MSCs exposed to 50 MPa magnitude of HP, even in the absence of osteoinductive factors. In addition, a greater staining area of both osteopontin and hydroxyapatite was detected in the 50 MPa/OST group. These findings highlight the benefit of hydrostatic pressure to regulate osteogenesis of MSCs as well as the importance of employing simultaneous biochemical and mechanical stimulation to accelerate the osteogenic potential of MSCs for biomedical purposes.

Optimization of Surface-Engineered Micropatterns on Bacterial Cellulose for Guided Scar-Free Skin Wound Healing

Bacterial cellulose (BC) has been widely used in tissue engineering due to its unique spatial structure and suitable biological properties. In this study, a small biologically active Arginine-Glycine-Aspartic acid-Serine (RGDS) tetrapeptide was incorporated on the porous BC surface followed by a low-energy CO₂ laser etching operation. As a result, different micropatterns were established on the BC surface with RGDS only anchored on the raised platform surface of the micropatterned BC (MPBC). Material characterization showed that all micropatterned structures exhibited platforms with a width of ~150 μm and grooves with a width of ~100 μm and a depth of ~300 μm, which displayed distinct hydrophilic and hydrophobic properties. The resulting RGDS-MPBC could hold the material integrity, as well as the microstructure morphology under a humid environment. In-vitro and in-vivo assays on cell migration, collagen deposition, and histological analysis revealed that micropatterns led to significant impacts on wound healing progress compared to the BC without surface-engineered micropatterns. Specifically, the basket-woven micropattern etched on the BC surface exhibited the optimal wound healing outcome with the presence of fewer macrophages and the least scar formation. This study further addresses the potential of adopting surface micropatterning strategies to promote skin wounds towards scar-free outcomes.

Comparative Analysis of the Potential for Germ Cell (GC) Differentiation of Bovine Peripheral Blood Derived-Mesenchymal Stem Cells (PB-MSC) and Spermatogonial Stem Cells (SSC) in Co-Culture System with Sertoli Cells (SC)

Although spermatogonial stem cells (SSC) constitute primary candidates for in vitro germ cell (GC) derivation, they are scarce and difficult to maintain in an undifferentiated state. Alternatively, mesenchymal stem cells (MSC) are also candidates for GC derivation due to their simplicity for culture and multipotential for transdifferentiation. The aim of the present study was to compare the GC differentiation potentials of bull peripheral blood-derived MSC (PB-MSC) and SSC using an in vitro 3D co-culture system with Sertoli cells (SC). Samples of PB-MSC or SSC co-cultures with SC were collected on days 0, 7, 14 and 21 and analyzed for pluripotency, GC and mesenchymal marker expression. Co-culture of PB-MSC+SC resulted in down-regulation of NANOG and up-regulation of OCT4 at day 7. In comparison, co-culture of SSC+SC resulted in consistent expression of NANOG, OCT4 and SOX2 at day 14. During co-culture, SSC+SC increased the expression of DAZL, PIWIL2, FRAGILIS and STELLA and activated the expression of STRA8, whereas co-culture of PB-MSC+SC only increased the expression of DAZL and PIWIL2. Thus, co-culture of bull PB-MSC+SC and SSC+SC in 3D SACS results in differential expression of pluripotency and GC markers, where bull SSC display a more robust GC differentiation profile compared to PB-MSC.

Regulation of micropatterned curvature-dependent FA heterogeneity on cytoskeleton tension and nuclear DNA synthesis of malignant breast cancer cells

Breast cancer is considered as a worldwide disease due to its high incidence and malignant metastasis. Although numerous techniques have been developed well to conduct breast cancer therapy, the influence of micropattern-induced interfacial heterogeneity on the molecular mechanism and nuclear signalling transduction of carcinogenesis is rarely announced. In this study, PDMS stencil-assisted micropatterns were fabricated on tissue culture plates to manage cell clustering colony by adjusting initial cell seeding density and the size of microholes. The curvature of each microholes was controlled to construct the interfacial heterogeneity of MDA-MB231 cancer cells at the periphery of micropatterned colony. The distinguished focal adhesion (FA) and cytoskeleton distribution at the central and peripheral regions of the cell colony were regulated by heterogeneous properties. The interfacial heterogeneity of FA and cytoskeleton would induce the biased tension force to encourage more ezrin expression at the periphery and further promote DNA synthesis, therefore disclosing a stem-like phenotype in heterogeneous cells. This study will provide a value source of information for the development of micropattern-induced heterogeneity and the interpretation of metastatic mechanism in malignant breast cancer cells.

Micro-patterned cell populations as advanced pharmaceutical drugs with precise functional control

Human cells are both advanced pharmaceutical drugs and 'drug deliverers'. However, functional control prior to or after cell implantation remains challenging. Micro-patterning cells through geometrically defined adhesion sites allows controlling morphogenesis, polarity, cellular mechanics, proliferation, migration, differentiation, stemness, cell-cell interactions, collective cell behavior, and likely immuno-modulatory properties. Consequently, generating micro-patterned therapeutic cells is a promising idea that has not yet been realized and few if any steps have been undertaken in this direction. This review highlights potential therapeutic applications, summarizes comprehensively the many cell functions that have been successfully controlled through micro-patterning, details the established micro-pattern designs, introduces the available fabrication technologies to the non-specialized reader, and suggests a quality evaluation score. Such a broad review is not yet available but would facilitate the manufacturing of therapeutically patterned cell populations using micro-patterned cell-instructive biomaterials for improved functional control as drug delivery systems in the context of cells as pharmaceutical products.

Applications and analytical tools of cell communication based on ligand-receptor interactions at single cell level

BACKGROUND

Cellular communication is an essential feature of multicellular organisms. Binding of ligands to their homologous receptors, which activate specific cell signaling pathways, is a basic type of cellular communication and intimately linked to many degeneration processes leading to diseases.

MAIN BODY

This study reviewed the history of ligand-receptor and presents the databases which store ligand-receptor pairs. The recently applications and research tools of ligand-receptor interactions for cell communication at single cell level by using single cell RNA sequencing have been sorted out.

CONCLUSION

The summary of the advantages and disadvantages of analysis tools will greatly help researchers analyze cell communication at the single cell level. Learning cell communication based on ligand-receptor interactions by single cell RNA sequencing gives way to developing new target drugs and personalizing treatment.

The varied influences of cell adhesion and spreading on gene transfection of mesenchymal stem cells on a micropatterned substrate

Transmembrane transport of exogenous genes is widely investigated because of high demand for gene therapy. Both gene carriers and cellular conditions can affect gene transfection efficiency. Although cell morphology has been reported to affect cell functions, the influence of cell adhesion area and cell spreading area on the transfection of exogenous genes remains unclear because it is difficult to separate the individual influence of these areas during normal cell culture. In this study, micropatterns were prepared to separately control the adhesion and spreading areas of human bone marrow-derived mesenchymal stem cells (hMSCs). Transfection efficiency of the green fluorescent protein gene to hMSCs cultured on the micropatterns was compared. Cells with a larger adhesion area showed higher transfection efficiency, while cell spreading area hardly affected gene transfection efficiency. Cell adhesion area had dominant influence on gene transfection. Microparticle uptake and BrdU staining showed that the cellular uptake capacity and DNA synthesis activity increased with the increase in cell adhesion area, but were not affected by cell spreading area. The different influence of cell adhesion area and cell spreading area on gene transfection was correlated with their influence on cellular uptake capacity, DNA synthesis activity, focal adhesion formation, cytoskeletal mechanics, and mechanotransduction signal activation. The results suggest that cell adhesion area and cell spreading area had different influence on gene transfection; this finding should provide useful information for the manipulation of cell functions in gene therapy, protein modification, and cell reprogramming. STATEMENT OF SIGNIFICANCE: Cell adhesion and spreading are important morphological factors during the interaction of cells with biomaterial surfaces or interfaces. However, the predominant morphological factor that affects cellular functions such as gene transfection remains unclear. In the present study, special micropatterns were used to precisely control cell adhesion and spreading areas independently. Mesenchymal stem cells cultured on the micropatterns were transfected with the green fluorescent protein gene to compare the different influence of cell adhesion and spreading areas on gene transfection efficiency. Cell adhesion area showed dominant influence on gene transfection, while cell spreading area did not affect gene transfection. The dominant influence of cell adhesion area could be explained by cellular uptake capacity and DNA synthesis activity through the formation of FAs, cytoskeletal mechanics, and YAP/TAZ nuclear localization. The results provide new insights of correlation between cell morphology and cellular functions for designing functional biomaterials.

Influence of Mesenchymal Stem Cell Sources on Their Regenerative Capacities on Different Surfaces

Current gold-standard strategies for bone regeneration do not achieve the optimal recovery of bone biomechanical properties. To bypass these limitations, tissue engineering techniques based on hybrid materials made up of osteoprogenitor cells-such as mesenchymal stem cells (MSCs)-and bioactive ceramic scaffolds-such as calcium phosphate-based (CaPs) bioceramics-seem promising. The biological properties of MSCs are influenced by the tissue source. This study aims to define the optimal MSC source and construct (i.e., the MSC-CaP combination) for clinical application in bone regeneration. A previous iTRAQ analysis generated the hypothesis that anatomical proximity to bone has a direct effect on MSC phenotype. MSCs were isolated from adipose tissue, bone marrow, and dental pulp, then cultured both on a plastic surface and on CaPs (hydroxyapatite and β-tricalcium phosphate), to compare their biological features. On plastic, MSCs isolated from dental pulp (DPSCs) presented the highest proliferation capacity and the greatest osteogenic potential. On both CaPs, DPSCs demonstrated the greatest capacity to colonise the bioceramics. Furthermore, the results demonstrated a trend that DPSCs had the most robust increase in ALP activity. Regarding CaPs, β-tricalcium phosphate obtained the best viability results, while hydroxyapatite had the highest ALP activity values. Therefore, we propose DPSCs as suitable MSCs for cell-based bone regeneration strategies.

Biomimetic Culture Strategies for the Clinical Expansion of Mesenchymal Stromal Cells

Mesenchymal stromal/stem cells (MSCs) typically require significant ex vivo expansion to achieve the high cell numbers required for research and clinical applications. However, conventional MSC culture on planar (2D) plastic surfaces has been shown to induce MSC senescence and decrease cell functionality over long-term proliferation, and usually, it has a high labor requirement, a high usage of reagents, and therefore, a high cost. In this Review, we describe current MSC-based therapeutic strategies and outline the important factors that need to be considered when developing next-generation cell expansion platforms. To retain the functional value of expanded MSCs, ex vivo culture systems should ideally recapitulate the components of the native stem cell microenvironment, which include soluble cues, resident cells, and the extracellular matrix substrate. We review the interplay between these stem cell niche components and their biological roles in governing MSC phenotype and functionality. We discuss current biomimetic strategies of incorporating biochemical and biophysical cues in MSC culture platforms to grow clinically relevant cell numbers while preserving cell potency and stemness. This Review summarizes the current state of MSC expansion technologies and the challenges that still need to be overcome for MSC clinical applications to be feasible and sustainable.

Effect of Hydrothermal Media on the in-situ Whisker Growth on Biphasic Calcium Phosphate Ceramics

BACKGROUND

There is still a big challenge to achieve a balance between mechanical characteristics and biological properties in biphasic calcium phosphate (BCP) ceramics.

PURPOSE

The present study focused on the in-situ whisker growth on BCP ceramics via different hydrothermal treatments and investigated the influences of these whiskers on the mechanical property and biological performance of the ceramics.

METHODS

Five kinds of BCP ceramics with in-situ whisker growth, ie, BCP-C, BCP-HNO3, BCP-Citric, BCP-NaOH, BCP-CaCl2 and BCP-Na3PO4 were fabricated by different hydrothermal treatments. The phase compositions, morphologies, crystal structures and mechanical strengths of the obtained BCP ceramics were firstly characterized. Then, the in vitro cell adhesion, proliferation and alkaline  phosphatase (ALP) activity of bone marrow stromal cells (BMSCs) on the BCP ceramics were evaluated. Lastly, the effects of in-situ whisker growth on the bone-like apatite formation abilities of BCP ceramics were also investigated by immersing them in simulated body fluid (SBF).

RESULTS

The results demonstrated that the hydrothermal conditions, especially the hydrothermal media, were crucial to determine the phase composition and morphology of the in-situ whisker. Especially among the five media used (HNO3, Citric, NaOH, CaCl2 and Na3PO4), the Na3PO4 treatment resulted in the shortest whisker with a unique hollow structure, and kept the original biphasic composition. All five kinds of whiskers increased the mechanical strength of BCP ceramics to some extent, and showed the good ability of bone-like apatite formation. The in vitro cell study demonstrated that the in-situ whisker growth had no adverse but even positive effect on the adhesion, proliferation and ALP activity of BMSCs.

CONCLUSION

Due to the growth of in-situ whiskers, the mechanical property and biological performance of the obtained BCP ceramics could increase simultaneously. Therefore, in-situ whiskers growth offers a promising strategy for the expanded application of BCP ceramics to meet the requirements of regenerative medicine.

New avenues for systematically inferring cell-cell communication: through single-cell transcriptomics data

For multicellular organisms, cell-cell communication is essential to numerous biological processes. Drawing upon the latest development of single-cell RNA-sequencing (scRNA-seq), high-resolution transcriptomic data have deepened our understanding of cellular phenotype heterogeneity and composition of complex tissues, which enables systematic cell-cell communication studies at a single-cell level. We first summarize a common workflow of cell-cell communication study using scRNA-seq data, which often includes data preparation, construction of communication networks, and result validation. Two common strategies taken to uncover cell-cell communications are reviewed, e.g., physically vicinal structure-based and ligand-receptor interaction-based one. To conclude, challenges and current applications of cell-cell communication studies at a single-cell resolution are discussed in details and future perspectives are proposed.

Regulation of Stem Cell Functions by Micro-Patterned Structures

Micro-patterned surfaces have been broadly used to control the morphology of stem cells for investigation of the influence of physiochemical and biological cues on stem cell functions. Different structures of micro-patterned surfaces can be prepared by photolithography through designing the photomask features. Cell spreading area, geometry, aspect ratio, and alignment can be regulated by the micro-patterned structures. Their influences on adipogenic, osteogenic, and smooth muscle differentiation of the human bone marrow-derived mesenchymal stem cells are compared and investigated in details. Variation of cell morphology can trigger rearrangement of cytoskeleton, generating cytoskeletal mechanical stimulation and consequently inducing differentiation of mesenchymal stem cells into different lineages. This chapter summarizes the latest development of regulation of mesenchymal stem cell morphology by micro-patterns and the influence on the behaviors and differentiation of the mesenchymal stem cells.

Micropatterned substrates with physiological stiffness promote cell maturation and Pompe disease phenotype in human induced pluripotent stem cell-derived skeletal myocytes

Recent advances in bioengineering have enabled cell culture systems that more closely mimic the native cellular environment. Here, we demonstrated that human induced pluripotent stem cell (iPSC)-derived myogenic progenitors formed highly-aligned myotubes and contracted when seeded on two-dimensional micropatterned platforms. The differentiated cells showed clear nuclear alignment and formed elongated myotubes dependent on the width of the micropatterned lanes. Topographical cues from micropatterning and physiological substrate stiffness improved the formation of well-aligned and multinucleated myotubes similar to myofibers. These aligned myotubes exhibited spontaneous contractions specifically along the long axis of the pattern. Notably, the micropatterned platforms developed bundle-like myotubes using patient-derived iPSCs with a background of Pompe disease (glycogen storage disease type II) and even enhanced the disease phenotype as shown through the specific pathology of abnormal lysosome accumulations. A highly-aligned formation of matured myotubes holds great potential in further understanding the process of human muscle development, as well as advancing in vitro pharmacological studies for skeletal muscle diseases.

Guided cell adhesion, orientation, morphology and differentiation on silicon substrates photolithographically micropatterned with a cell-repellent cross-linked poly(vinyl alcohol) film

In this work, silicon substrates with poly(vinyl alcohol) (PVA) patterns created by a simple, low-cost and high-fidelity photolithographic procedure were evaluated with respect to cell adhesion and alignment, viability, metabolic activity, proliferation and cell cycle progression using the human glioblastoma cell-line U87MG and human skin fibroblasts. In addition, rat adrenal pheochromocytoma cells (PC-12) were employed to evaluate a modified photolithographic protocol appropriate for adhesion of cells requiring extracellular matrix components to adhere on the surface and to demonstrate that the proposed patterned substrates could provide unhindered cell differentiation. Regarding U87MG cells and skin fibroblasts, it was found that as the stripes width increased from 10 to 50 μm, the percentage of cells attached to Si versus the total area (Si + PVA) increased from 78% and 72% to 98.5% and 94.5% (p < 0.05), for U87MG cells and skin fibroblasts, respectively, with optimum cell alignment (≥95% of adherent cells with fidelity between 0.90 and 1.0; p < 0.05) for stripes width ranging between 20 and 22.5 μm. Concerning the viability, metabolic activity and proliferation of adherent cells, no statistically significant differences were observed compared to cells cultured onto non-patterned surfaces. Regarding PC-12 cells, a modification of the patterning procedure was followed involving coating of the substrate with type IV collagen prior to the photolithographic procedure, since they could not adhere on plain Si substrates. It was found that PC-12 cells adhere selectively (>95%) to collagen-coated Si stripes when the pattern width was equal to or wider than 10 μm. Following treatment with nerve growth factor, approximately 80% (p < 0.05) of the adherent cells differentiated to neuron-like cells extending neurites exclusively within the pattern. Given that the proposed patterning procedure allows highly selective cell adhesion without affecting cell proliferation, metabolic activity, and differentiation it could serve as a useful tool in various fields including tissue engineering, cell-based sensors and analytical microsystems.

Osteogenic Differentiation of Bone Marrow-Derived Mesenchymal Stem Cells in Electrospun Silica Nonwoven Fabrics

Silica nonwoven fabrics (SNFs) with enough mechanical strength are candidates as implantable scaffolds. Culture of cells therein is expected to affect the proliferation and differentiation of the cells through cell-cell and cell-SNF interactions. In this study, we examined three-dimensional (3D) SNFs as a scaffold of mesenchymal stem cells (MSCs) for bone tissue engineering applications. The interconnected highly porous microstructure of 3D SNFs is expected to allow omnidirectional cell-cell interactions, and the morphological similarity of a silica nanofiber to that of a fibrous extracellular matrix can contribute to the promotion of cell functions. 3D SNFs were prepared by the sol-gel process, and their mechanical properties were characterized by the compression test and rheological analysis. In the compression test, SNFs showed a compressive elastic modulus of over 1 MPa and a compressive strength of about 200 kPa. These values are higher than those of porous polystyrene disks used for in vitro 3D cell culture. In rheological analysis, the elastic modulus and fracture stress were 3.27 ± 0.54 kPa and 25.9 ± 8.3 Pa, respectively. Then, human bone marrow-derived MSCs were cultured on SNFs, and the effects on proliferation and osteogenic differentiation were evaluated. The MSCs seeded on SNF proliferated, and the thickness of the cell layer became over 80 μm after 14 days of culture. The osteogenic differentiation of MSCs on SNFs was induced by the culture in the commercial osteogenic differentiation medium. The alkaline phosphatase activity of MSCs on SNFs increased rapidly and remained high up to 14 days and was much higher than that on two-dimensional tissue culture-treated polystyrene. The high expression of RUNX2 and intense staining by alizarin red s after differentiation supported that SNFs enhanced the osteogenic differentiation of MSCs. Furthermore, permeation analysis of SNFs using fluorescein isothiocyanate-dextran suggested a sufficient permeability of SNFs for oxygen, minerals, nutrients, and secretions, which is important for maintaining the cell viability and vitality. These results suggested that SNFs are promising scaffolds for the regeneration of bone defects using MSCs, originated from highly porous and elastic SNF characters.

Synthesis of photo-reactive poly (vinyl alcohol) and construction of scaffold-free cartilage like pellets in vitro

Photo-reactive poly(vinyl alcohol) (PRPVA) was synthesized by introduction of phenyl azido groups into poly(vinyl alcohol) (PVA) and applied for surface modification. PRPVA was grafted onto cell culture plate surface homogeneously or in a micropattern. Human mesenchymal stem cells (hMSCs) cultured on cell culture plate surface and PVA-modified surface showed different behaviors. Cells adhered and spread well on cell culture plate surface, while they did not adhere on PVA-grafted surface at all. When hMSCs were cultured on PVA-micropatterned surface, they formed a cell micropattern. Cells formed pellets after cultured on PVA homogeneously modified surface in chondrogenic induction medium for 2 weeks. The pellets were positively stained by hematoxylin/eosin, safranin-O/fast green and toluidin blue, and they were also stained brown by Type II collagen and proteoglycan immunohistological staining. Real-time PCR analysis was conducted to investigate the expression of colI, colII, colX, aggrecan and sox9 mRNA. Results of gene expression were in agreement with those of histological and immunohistological observations. These results indicated that hMSCs cultured on PVA-modified surface performed chondrogenic differentiation, and it was possible to construct scaffold-free cartilage like pellets with PVA-modified surface in vitro.

Fabrication of gelatin-micropatterned surface and its effect on osteogenic differentiation of hMSCs

Micropatterned surface with different surface chemistries was fabricated for the direct comparison of their effect on the behaviors of hMSCs and to avoid any batch to batch variations during cell culture.

Influence of patterned titanium coatings on polarization of macrophage and osteogenic differentiation of bone marrow stem cells

Biomaterial surface topography plays a vital role in the osteointegration of implants by regulating the early cell responses and tissue growth-in. However, most of the previous researches focused on the effects of osteogenic cells, only a little is known about the immune cells which dominate osteogenesis after implanting. In this paper, patterned titanium coatings were fabricated and the effects of surface topography on the macrophage behaviors were investigated. On patterned titanium surface, macrophages preferred to polarize to M2, while macrophages on traditional titanium coatings presented higher M1 polarization. Nearly 70% higher expression of anti-inflammatory genes, including interleukin-4, interleukin-10, interleukin-1ra, and arginase, were detected on the patterned titanium coatings. While the pro-inflammatory genes, such as interleukin-1β, interleukin-6, tumor necrosis factor-α, interferon-γ, and inducible nitric oxide synthase were notably depressed. Up-regulation of the osteoinductive cytokines were also detected on the patterned coatings, which indicated advantageous osteogenic microenvironment provided by macrophages. Immunomodulation effect on osteogenesis was also investigated in this study. Stimulated with RAW cells/patterned coatings conditioned medium, bone marrow stem cells presented nearly 1.5 fold higher expression of osteogenic genes and more mineralization nodules than the traditional sprayed Ti coatings. All these results suggested that modulating materials with a patterned surface might be a valuable strategy to endow the implants with favorable osteoimmunomodulatory properties.

Increased stem cells delivered using a silk gel/scaffold complex for enhanced bone regeneration

The low in vivo survival rate of scaffold-seeded cells is still a challenge in stem cell-based bone regeneration. This study seeks to use a silk hydrogel to deliver more stem cells into a bone defect area and prolong the viability of these cells after implantation. Rat bone marrow stem cells were mingled with silk hydrogels at the concentrations of 1.0 × 10⁵/mL, 1.0 × 10⁶/mL and 1.0 × 10⁷/mL before gelation, added dropwise to a silk scaffold and applied to a rat calvarial defect. A cell tracing experiment was included to observe the preservation of cell viability and function. The results show that the hydrogel with 1.0 × 10⁷/mL stem cells exhibited the best osteogenic effect both in vitro and in vivo. The cell-tracing experiment shows that cells in the 1.0 × 10⁷ group still survive and actively participate in new bone formation 8 weeks after implantation. The strategy of pre-mingling stem cells with the hydrogel had the effect of delivering more stem cells for bone engineering while preserving the viability and functions of these cells in vivo.

Discriminating the Independent Influence of Cell Adhesion and Spreading Area on Stem Cell Fate Determination Using Micropatterned Surfaces

Adhesion and spreading are essential processes of anchorage dependent cells involved in regulation of cell functions. Cells interact with their extracellular matrix (ECM) resulting in different degree of adhesion and spreading. However, it is not clear whether cell adhesion or cell spreading is more important for cell functions. In this study, 10 types of isotropical micropatterns that were composed of 2 μm microdots were prepared to precisely control the adhesion area and spreading area of human mesenchymal stem cells (MSCs). The respective influence of adhesion and spreading areas on stem cell functions was investigated. Adhesion area showed more significant influences on the focal adhesion formation, binding of myosin to actin fibers, cytoskeletal organization, cellular Young's modulus, accumulation of YAP/TAZ in nuclei, osteogenic and adipogenic differentiation of MSCs than did the spreading area. The results indicated that adhesion area rather than spreading area played more important roles in regulating cell functions. This study should provide new insight of the influence of cell adhesion and spreading on cell functions and inspire the design of biomaterials to process in an effective manner for manipulation of cell functions.

Effects of substrate stiffness and cell-cell contact on mesenchymal stem cell differentiation

The mechanical properties of the microenvironment and direct contact-mediated cell-cell interactions are two variables known to be important in the determination of stem cell differentiation fate, but little is known about the interplay of these cues. Here, we use a micropatterning approach on polyacrylamide gels of tunable stiffnesses to study how homotypic cell-cell contacts and mechanical stiffness affect different stages of osteogenesis of mesenchymal stem cells (MSCs). Nuclear localization of transcription factors associated with osteogenesis depended on substrate stiffness and was independent of the degree of cell-cell contact. However, expression of alkaline phosphatase, an early protein marker for osteogenesis, increased only in cells with both direct contact with neighboring cells and adhesion to stiffer substrates. Finally, mature osteogenesis, as assessed by calcium deposition, was low in micropatterned cells, even on stiff substrates and in multicellular clusters. These results indicate that substrate stiffness and the presence of neighboring cells regulate osteogenesis in MSCs.

Influence of cell size on cellular uptake of gold nanoparticles

Cell size affects cellular uptake of gold nanoparticles (AuNPs).

Graphene-Based Materials for Stem Cell Applications

Although graphene and its derivatives have been proven to be suitable for several biomedical applications such as for cancer therapy and biosensing, the use of graphene for stem cell research is a relatively new area that has only recently started to be investigated. For stem cell applications, graphene has been utilized by itself or in combination with other types of materials such as nanoparticles, nanofibers, and polymer scaffolds to take advantage of the several unique properties of graphene, such as the flexibility in size, shape, hydrophilicity, as well as its excellent biocompatibility. In this review, we will highlight a number of previous studies that have investigated the potential of graphene or its derivatives for stem cell applications, with a particular focus on guiding stem cell differentiation into specific lineages (e.g., osteogenesis, neurogenesis, and oligodendrogenesis), promoting stem cell growth, stem cell delivery/transplantation, and effective monitoring of their differentiation. We hope that this review promotes and accelerates the use of graphene-based materials for regenerative therapies, especially for stem cell-based approaches to cure various incurable diseases/disorders such as neurological diseases (e.g., Alzheimer's disease and Parkinson's disease), stroke, spinal cord injuries, bone/cartilage defects, and cardiovascular diseases.

Regulating the stemness of mesenchymal stem cells by tuning micropattern features

There is increasing evidence that microstructures play an important role in the maintenance of the multipotency of stem cells. However, it is not clear how micropatterns affect the stemness of stem cells. We prepared micropatterns of different sizes, shapes and aspect ratios and used them for the culture of mesenchymal stem cells (MSCs) derived from human bone marrow to investigate their influence on the stemness of MSCs at the single cell level. The percentage of cells positively stained by stem cell markers decreased with increasing spreading area and aspect ratio. However, the cellular geometry controlled by the geometrical micropatterns had no significant influence on the expression of stem cell markers. The change in the stemness of stem cells was accompanied by changes in the nuclear activity and cytoskeleton. The nuclear activity increased with increasing spreading area and aspect ratio. The actin filament structure was significantly influenced by the spreading area and aspect ratio. The cells became stiffer when they had sufficient area to spread into or when they were elongated. These results suggest that controlling the cell morphology by micropatterns may be useful in varying the stemness of MSCs. This study will contribute to the design of materials for maintaining the multipotency of stem cells, enhancing their clinical application and helping to reveal the processes taking place under conditions of stem cell quiescence in vivo.

Effects of Immobilized BMP-2 and Nanofiber Morphology on In Vitro Osteogenic Differentiation of hMSCs and In Vivo Collagen Assembly of Regenerated Bone

Engineering bone tissue is particularly challenging because of the distinctive structural features of bone within a complex biochemical environment. In the present study, we fabricated poly(L-lactic acid) (PLLA) electrospun nanofibers with random and aligned morphology immobilized with bone morphogenic protein-2 (BMP-2) and investigated how these signals modulate (1) in vitro osteogenic differentiation of human mesenchymal stem cells (hMSCs) and (2) in vivo bone growth rate, mechanical properties, and collagen assembly of newly formed bone. The orientation of adherent cells followed the underlying nanofiber morphology; however, nanofiber alignment did not show any difference in alkaline phosphate activity or in calcium mineralization of hMSCs after 14 days of in vitro culture in osteogenic differentiation media. In vivo bone regeneration was significantly higher in the nanofiber implanted groups (approximately 65-79%) as compared to the defect-only group (11.8 ± 0.2%), while no significant difference in bone regeneration was observed between random and aligned groups. However, nanoindentation studies of regenerated bone revealed Young's modulus and contact hardness with anisotropic feature for aligned group as compared to random group. More importantly, structural analysis of collagen at de novo bone showed the ability of nanofiber morphology to guide collagen deposition. SEM and TEM images revealed regular, highly ordered collagen assemblies on aligned nanofibers as compared to random fibers, which showed irregular, randomly organized collagen deposition. Taken together, we conclude that nanofibers in the presence of osteoinductive signals are a potent tool for bone regeneration, and nanofiber alignment can be used for engineering bone tissues with structurally assembled collagen fibers with defined direction.

Controlling differentiation of adipose-derived stem cells using combinatorial graphene hybrid-pattern arrays

Control of stem cell fate by modulating biophysical cues (e.g., micropatterns, nanopatterns, elasticity and porosity of the substrates) has emerged as an attractive approach in stem cell-based research. Here, we report a method for fabricating combinatorial patterns of graphene oxide (GO) to effectively control the differentiation of human adipose-derived mesenchymal stem cells (hADMSCs). In particular, GO line patterns were highly effective for modulating the morphology of hADMSCs, resulting in enhanced differentiation of hADMSCs into osteoblasts. Moreover, by generating GO grid patterns, we demonstrate the highly efficient conversion of mesodermal stem cells to ectodermal neuronal cells (conversion efficiency = 30%), due to the ability of the grid patterns to mimic interconnected/elongated neuronal networks. This work provides an early demonstration of developing combinatorial graphene hybrid-pattern arrays for the control of stem cell differentiation, which can potentially lead to more effective stem cell-based treatment of incurable diseases/disorders.

CDH2 and CDH11 act as regulators of stem cell fate decisions

Accumulating evidence suggests that the mechanical and biochemical signals originating from cell-cell adhesion are critical for stem cell lineage specification. In this review, we focus on the role of cadherin mediated signaling in development and stem cell differentiation, with emphasis on two well-known cadherins, cadherin-2 (CDH2) (N-cadherin) and cadherin-11 (CDH11) (OB-cadherin). We summarize the existing knowledge regarding the role of CDH2 and CDH11 during development and differentiation in vivo and in vitro. We also discuss engineering strategies to control stem cell fate decisions by fine-tuning the extent of cell-cell adhesion through surface chemistry and microtopology. These studies may be greatly facilitated by novel strategies that enable monitoring of stem cell specification in real time. We expect that better understanding of how intercellular adhesion signaling affects lineage specification may impact biomaterial and scaffold design to control stem cell fate decisions in three-dimensional context with potential implications for tissue engineering and regenerative medicine.

Multifunctional wettability patterns prepared by laser processing on superhydrophobic TiO2nanostructured surfaces

An ultrafast laser technique is developed to construct a three-dimensional pattern with high wettability contrast on a superhydrophobic TiO₂nanotube array surface for droplet manipulation and biomedical scaffold.

Multiscale, hierarchically patterned topography for directing human neural stem cells into functional neurons

Various biophysical and biochemical factors are important for determining the fate of neural stem cells (NSCs). Among biophysical signals, topographical stimulation by micro/nanopatterns has been applied to control NSC differentiation. In this study, we developed a hierarchically patterned substrate (HPS) platform that can synergistically enhance the differentiation of human NSCs (hNSCs) by simultaneously providing microscale and nanoscale spatial controls to facilitate the alignment of the cytoskeleton and the formation of focal adhesions. The multiscale HPS was fabricated by combining microgroove patterns (groove size: 1.5 μm), prepared by a conventional photolithographic process, and nanopore patterns (pore diameter: 10 nm), prepared from cylinder-forming block copolymer thin films. The hNSCs grown on the HPS exhibited not only a highly aligned, elongated morphology, but also a greatly enhanced differentiation into neuronal and astrocyte lineages, compared to hNSCs on a flat substrate (FS) or single-type patterned substrates [microgroove patterned substrate (MPS) and nanopore patterned substrate (NPS)]. Interestingly, the application of the HPS directed hNSC differentiation toward neurons rather than astrocytes. The expression of focal adhesion proteins in hNSCs was also significantly increased on the HPS compared to the FS, MPS, and NPS, likely a result of the presence of more focal contact points provided by nanopore structures. Inhibition of both β1 integrin-mediated binding and the intracellular Rho-associated protein kinase pathway of hNSCs eliminated the beneficial effects of the HPS on focal adhesion formation and actin filament alignment, which subsequently reduced hNSC differentiation. More importantly, hNSCs on the HPS differentiated into functional neurons exhibiting sodium currents and action potentials. The multiscale, hierarchically patterned topography would be useful for the design of functional biomaterial scaffolds to potentiate NSC therapeutic efficacy.

Response of filopodia and lamellipodia to surface topography on micropatterned silk fibroin films

Cell-microstructure surface interactions play a significant role in tissue engineering to guide cell spreading and migration. However, the mechanisms underlying cell-topography interactions are complex and remain elusive. To address this topic, microsphere array patterns were prepared on silk fibroin films through polystyrene microsphere self-assembly, followed by culturing rat bone marrow derived mesenchymal stem cells on the films to study cell-substrate interactions. Filopodia sensed and anchored to the microspheres to form initial attachments before spreading. Importantly, the anchored filopodia converted into lamellipodia, and this conversion initiated the directional formation of lamellipodia. Therefore, the conversion of exploratory filopodia into lamellipodia was the main driving force for directional extension of the lamellipodia. Correspondingly, cell spreading, morphology, and migration were modulated by pseudopodial recognition and conversion. This finding demonstrated that filopodia not only act as an antenna to detect microenvironment but also serve as skeleton to guide lamellipodial extension for directing cell motions. The micropatterned films promoted cell adhesion and proliferation due to accelerated lamellipodia formation and cell spreading, with recognition and conversion of filopodia into lamellipodia as a critical role in cell response to surface topography.