Analysis of retromuscular drain output and postoperative outcomes for heavyweight versus mediumweight polypropylene mesh following open ventral hernia repair

PURPOSE

Heavyweight polypropylene (HWPP) mesh is thought to increase inflammatory response and delay tissue integration compared to mediumweight (MWPP). Reactive fluid volume (i.e., drain output) may be a reasonable surrogate for integration. We hypothesized that daily drain output is higher with HWPP compared to MWPP in open retromuscular ventral hernia repair (VHR).

METHODS

This is a post-hoc analysis of a multicenter, randomized clinical trial conducted March 2017-April 2019 comparing MWPP and HWPP for VHR. Retromuscular drain output in milliliters was measured at 24-h intervals up to postoperative day seven. Univariate analyses compared differences in daily drain output and time to drain removal. Multivariable analyses compared total drain output and wound morbidity within 30 days and hernia recurrence at 1 year.

RESULTS

288 patients were included; 140 (48.6%) HWPP and 148 (51.4%) MWPP. Daily drain output for days 1-3 was higher for HWPP vs. MWPP (total volume: 837.8 mL vs. 656.5 mL) (p < 0.001), but similar on days 4-7 (p > 0.05). Median drain removal time was 5 days for both groups. Total drain output was not predictive of 30-day wound morbidity (p > 0.05) or hernia recurrence at 1 year (OR 1, p = 0.29).

CONCLUSION

While HWPP mesh initially had higher drain outputs, it rapidly returned to levels similar to MWPP by postoperative day three and there was no difference in clinical outcomes. We believe that drains placed around HWPP mesh can be managed similarly to MWPP mesh.

Next generation meshes for hernia repair: Polypropylene meshes coated with antimicrobial benzalkonium chloride induced proliferative activity of fibroblasts

Hernia repair is one of the most frequently performed world-wide surgical procedures in which hernia meshes are becoming increasingly used. Polypropylene (PP) mesh implants reduce the risk of recurrence and post-operative pain, although many other risks are associated with it, such as bacterial infection. In this study we developed PP meshes coated with the well-known antimicrobial compound, benzalkonium chloride (BAK) by dip-coating. Several dilutions (40, 20, 30, 10, 7.5, 5, 2.5, 1, 0.5, 0.1 and 0.05 % v/v) of commercial BAK solution (BAK diluted in 70 % ethyl alcohol at 0.1 % w/v) were used to produce antimicrobial meshes with different amounts of BAK. The dip-coating treatment with low concentrations of BAK (1, 0.5, 0.1 and 0.05 % v/v dilutions) was found to have biocompatible results in fibroblast. The use of 0.1 and 0.05 % v/v dilutions (PP meshes with up to ∼2 % w/w of BAK) showed proliferative activity on fibroblast cells, indicating that these novel antimicrobial meshes show great promise for hernia repair due to their ability to prevent infections while inducing fibroblast proliferation.

Preparation and Characterization of Functionalized Surgical Meshes for Early Detection of Bacterial Infections

Isotactic polypropylene (i-PP) nonabsorbable surgical meshes are modified by incorporating a conducting polymer (CP) layer to detect the adhesion and growth of bacteria by sensing the oxidation of nicotinamide adenine dinucleotide (NADH), a metabolite produced by the respiration reactions of such microorganisms, to NAD+. A three-step process is used for such incorporation: (1) treat pristine meshes with low-pressure O2 plasma; (2) functionalize the surface with CP nanoparticles; and (3) coat with a homogeneous layer of electropolymerized CP using the nanoparticles introduced in (2) as polymerization nuclei. The modified meshes are stable and easy to handle and also show good electrochemical response. The detection by cyclic voltammetry of NADH within the interval of concentrations reported for bacterial cultures is demonstrated for the two modified meshes. Furthermore, Staphylococcus aureus and both biofilm-positive (B+) and biofilm-negative (B-) Escherichia coli cultures are used to prove real-time monitoring of NADH coming from aerobic respiration reactions. The proposed strategy, which offers a simple and innovative process for incorporating a sensor for the electrochemical detection of bacteria metabolism to currently existing surgical meshes, holds considerable promise for the future development of a new generation of smart biomedical devices to fight against post-operative bacterial infections.

Losartan modifies mesh integration after abdominal wall repair: an experimental study

PURPOSE

Angiotensin II (AT II) receptor blockers have previously shown to reduce inflammatory response in many settings. We aimed to assess the effects of ATII receptor blocker (Losartan) on mesh integration after abdominal wall repair in a rat model.

METHODS

A total of 16 Wistar-Kyoto (WKY) and 16 previously hypertensive (SHRSP) rats were isolated. An acute ventral hernia followed by a bridged repair with heavyweight polypropylene mesh was performed. Subjects received either normal saline (WKY-C n = 8 and SHRPS-C n = 8) or 40 mg/kg losartan (WKY-L n = 8) and SHRPS-L n = 8) in the postoperative period. Blood pressure was recorded preoperatively and weekly after surgery. Necropsy with en-bloc resection of the abdominal wall was performed at postoperative day 30. Macroscopic and microscopic evaluations of the specimens were conducted. H&E and Masson's trichrome were used for histologic evaluation.

RESULTS

Both groups receiving Losartan showed a significant reduction of blood pressure after surgery (WKY-L: 130/85 vs 116/81 mmHg, SHRPS-L: 176/137 vs 122/101 mmHg, p < 0.01). A significant reduction in mesh incorporation and adherence scores were also observed on macroscopic analysis in Losartan groups (p < 0.01 and p   = 0.02, respectively). Microscopically, higher immature fibroplasia was observed after Losartan, with a significant reduction in scar plate formation and inflammatory response on the prosthetic surface (p = 0.04 and p  = 0.02, respectively).

CONCLUSION

Losartan modifies the interaction between the host tissue and the prosthesis. An impairment in mesh integration and immature fibroplasia in both normotensive and hypertensive rats detected in our model warrants further research.

The evaluation of functional small intestinal submucosa for abdominal wall defect repair in a rat model: Potent effect of sequential release of VEGF and TGF-β1 on host integration

Ineffective vessel penetration and extracellular matrix (ECM) remodeling are responsible for the failure of porcine small intestinal submucosa (SIS)-repaired abdominal wall defects. Combined growth factors could be used as directing signals in a nature-mimicking strategy to improve this repair through mesh functionalization. In this work, vascular endothelial growth factor (VEGF) and transforming growth factor β1 (TGF-β1) were incorporated into a silk fibroin membrane via coaxial aqueous electrospinning to exploit their benefits of biological interactions. The membrane was sandwiched into the SIS bilayer as a functional mesh to repair partial-thickness defects in a rat model. Membrane characterization demonstrated that the core-shell structure ensured the independent distribution and sequential release of two regulators and protection of their bioactivities, which were confirmed by cell viability and protein expression. The mesh was further assessed to facilitate vasculature formation and collagen secretion in vitro, and exhibited better host integration than VEGF- or TGF-β1-containing mesh and developed reinforced mechanical properties compared with the VEGF-containing mesh after 28 days in vivo. Determination of the underlying biological interactions revealed that rapid VEGF release promotes angiogenesis and collagen secretion but initially potentiates the inflammatory response. Sustained TGF-β1 release at relatively low concentrations promoted VEGF for vessel permeation and maturation and steadily induced ECM remodeling under milder foreign body reactions. The functionalization of SIS improves repair by sufficient integration with timely remodeling and helps elucidate the related regulatory interactions.

Filament-anchored hydrogel layer on polypropylene hernia mesh with robust anti-inflammatory effects

The efficacy of implanted polypropylene (PP) hernia meshes is often compromised by an inflammatory response. Thus, engineering an anti-inflammatory mesh has significant implications for hernioplasty. Here, we report a facile strategy to develop a filament-anchored hydrogel layer (FAHL) on PP mesh (FAHL-P). The network of FAHL, made up of chondroitin sulfate and gelatin (CG), provided a biomimetic surface with immunoregulatory properties. The use of tannic acid (TA) as a crosslinker for CG additionally enhanced its anti-inflammatory properties. In addition, the fabrication protocol ensured that the hydrogel maintained the properties of the knitted mesh and the firmly adherent FAHL during general handling (dry state) and in the simulated body environment (wet state). CG/TA-PP killed 99.99% of S. aureus and retained 73% of its original antioxidant properties after 7 d. The FAHL durably performed with a controlled release of TA for 15 d. The strong anti-inflammatory effects of FAHL-P reduced collagen deposition and increased vascularization, which promoted native tissue generation. The fabrication strategy has potential applications in hernioplasty and may provide new insights into the design of other anti-inflammatory implants. STATEMENT OF SIGNIFICANCE: A hydrogel layer with robust anti-inflammatory effects was anchored firmly on mesh filament for hernia repair. Requiring no drug loading, this chondroitin sulphate -gelatin (CG) based hydrogel itself could inhibit the immunological attack owing to the biomimetic microenvironment created by the CG. Moreover, the hydrogel's crosslinker (tannic acid) content served as an effective scavenger for reducing pro-inflammatory factors, significantly mitigating the inflammation. Interestingly, the antibacterial effect of such hydrogel layer was also observed. In terms of the synergistic outcome of the design, our mesh can remarkably attenuate inflammation and promote constructive tissue regeneration in vivo. Furthermore, considering the relatively simple and easily scaled up formulation process, our strategy may indeed have great potential in alleviating post-implantation outcomes.

Multilayer fibroin/chitosan oligosaccharide lactate and pullulan immunomodulatory patch for treatment of hernia and prevention of intraperitoneal adhesion

This study aims to develop a novel intraperitoneal two- or three-layered patch with immunomodulatory property for treatment of hernia, regeneration of abdominal wall and prevention of intraperitoneal adhesions. Polypropylene (PP) mesh, middle layer, was intended to provide mechanical support whereas pullulan (PUL) hydrogel coating layer was designed to prevent intraperitoneal adhesions. Fibroin/chitosan oligosaccharide lactate (F/COS) layer electrospun on one side of pullulan was chosen for immunomodulation and abdominal wall regeneration. Physical and mechanical properties and regenerative capacity of intraperitoneal patches were determined. Immunomodulatory property of electrospun layer and whole patch was studied by determining nitric oxide amount produced by RAW 264.7 macrophages. 25 % (w/v) PUL hydrogel and F/COS with 90:10 (w/w) ratio yielded optimal results. Here, we report that fabricated intraperitoneal patches successfully prevented cell adhesion on one side and increased cell viability and proliferation on other side, along with immunomodulation, in vitro.

Human Primary Dermal Fibroblasts Interacting with 3-Dimensional Matrices for Surgical Application Show Specific Growth and Gene Expression Programs

Several types of 3-dimensional (3D) biological matrices are employed for clinical and surgical applications, but few indications are available to guide surgeons in the choice among these materials. Here we compare the in vitro growth of human primary fibroblasts on different biological matrices commonly used for clinical and surgical applications and the activation of specific molecular pathways over 30 days of growth. Morphological analyses by Scanning Electron Microscopy and proliferation curves showed that fibroblasts have different ability to attach and proliferate on the different biological matrices. They activated similar gene expression programs, reducing the expression of collagen genes and myofibroblast differentiation markers compared to fibroblasts grown in 2D. However, differences among 3D matrices were observed in the expression of specific metalloproteinases and interleukin-6. Indeed, cell proliferation and expression of matrix degrading enzymes occur in the initial steps of interaction between fibroblast and the investigated meshes, whereas collagen and interleukin-6 expression appear to start later. The data reported here highlight features of fibroblasts grown on different 3D biological matrices and warrant further studies to understand how these findings may be used to help the clinicians choose the correct material for specific applications.

Dopamine-Mediated Zwitterionic Polyelectrolyte-Coated Polypropylene Hernia Mesh with Synergistic Anti-inflammation Effects

Over 20 million ventral hernia repairs are performed worldwide annually and only a minority (<10%) of cases are not mesh-based. However, even polypropylene (PP), endorsed as the "gold standard" of all prosthetic materials used in this field, is still subject to many complications caused by the foreign body reaction (FBR). Here, we describe the buildup of dopamine-mediated zwitterionic poly(sulfobetaine methacrylate) (PSBMA) coatings to inhibit nonspecific protein adsorption. Based on the universal adhesive ability of polydopamine (PDA), PSBMA has been coated on the PP mesh surface via two strategies: sequential deposition (PSBMA-PDA-PP) and co-deposition (PSBMA@PDA-PP). The presence of PSBMA shows great contribution to obviously decreased hydrophobicity of the PP surface (WCA_co = 36.3° and WCA_seq = 30.7°) as well as improved protein resistance (Reduction_co = 74% and Reduction_seq = 82%). Notably, as the intermedia between PP and PSBMA, PDA can endow the PP mesh with antioxidant activity, further featuring synergistic anti-inflammation therapeutic effect when coupled with PSBMA. With almost equal surface content of PSBMA, PSBMA-PDA-PP exhibited a more superior ability against macrophage adhesion and proliferation and showed more significantly decreased releases of TNF-α and IL-6 (p < 0.05) than those of PSBMA@PDA-PP, fundamentally attributed to its more neutral surface potential and the protection for polyphenols of PDA from oxidation with PSBMA as the outer layer. Furthermore, the coating layers demonstrated good stability and no sacrifice of the pristine mechanical property. The proposed dopamine-mediated PSBMA coatings possess high potential in biomedical implant areas for attenuating the FBR.

Zwitterionic amino acid-based Poly(ester urea)s suppress adhesion formation in a rat intra-abdominal cecal abrasion model

Hernia repair outcomes have improved with more robust material options for surgeons and optimized surgical techniques. However, ventral hernia repairs remain challenging with an inherent risk of post-surgical adhesions in the peritoneal space which can occur regardless of interventional material or its surgical placement. Herein, amino acid-based poly(ester urea)s (PEUs) with varied amount of an allyl ether side chains were modified post polymerization modification with the zwitterionic sulfnate group (3-((3-((3-mercaptopropanoyl)oxy)propyl) dimethylammonio)propane-1-sulfonate) to promote anti-adhesive properties. These alloc-PEUs were processed using roll-to-roll fabrication methods to afford films that were amenable to surface functionalization via a zwitterion-thiol. Functional group availability on the surface was confirmed via fluorescence microscopy, x-ray photoelectron spectroscopy (XPS), and quartz crystal microbalance (QCM) measurements. Zwitterionic treated PEUs exhibited reduced fibrinogen adsorption in vitro when compared to unfunctionalized control polymer. A rat intrabdominal cecal abrasion adhesion model was used to assess the extent and tenacity of adhesion formation in the presence of the PEUs. The 10% alloc-PEU zwitterion functionalized material was found to reduce the extent and tenacity of adhesions when compared to adhesion controls and the unfunctionalized PEU controls.

Calendula officinalis stimulate proliferation of mouse embryonic fibroblasts via expression of growth factors TGFβ1 and bFGF

Background

TGF-β has an important role in the process of wound healing and scar formation. The aim of this study is to determine the effects of ethanolic and methanolic extracts of Calendula officinalis on the expression of TGFβ1 and bFGF in the mouse embryonic fibroblast cells (MEFs).

Methods

Calendula officinalis extract was purchased and different substances defined with gas chromatography and mass spectrometry. MEFs were prepared and after incubating for 15 min, cell viability analyzed. TGF β 1 and bFGF gene expression was evaluated by real-time PCR. TGFβ1 and bFGF protein expression analyzed by ELISA. The statistical analysis of data was done by using SPSS software. Differences were considered significant at (P < 0.05).

Results

The results of the MTT test showed that the concentrations of 5 μg/ml and10 μg/ml were more suitable for cell proliferation. There was an increase in TGF β 1 gene expression in the MEFs. Expression of TGF β 1 gene remains the same after 24 h. Gene expression of bFGF showed a similar pattern with TGF β 1 expression for both solvents. Analysis of TGFβ1 protein expression showed an increase in TGFβ1 gene expression in the MEFs. Protein expression of bFGF in the MEFs increased at different concentrations at 12 and 24 h after treatment (P < 0.05 and P < 0.01 respectively).

Conclusion

Calendula officinalis stimulates proliferation of MEFs. Calendula via increased expression of growth factors (TGFβ1 and bFGF) at the first 12 h and a decrease of these factors at 24 h after treatment may ameliorate function of the MEFs in the during wound healing.

Evaluation of resorbable polydioxanone and polyglycolic acid meshes in a rat model of ventral hernia repair

The objective of this study was to evaluate physical, mechanical, and biological properties of the polydioxanone (PDO) monofilament meshes and polyglycolide (PGA) polyfilament meshes in comparison with Permacol^® implants. In rat experimental model, a 1.5 × 2.0 cm defect in abdominal wall was reconstructed by using the Permacol surgical implant or knitted meshes produced from either PDO monofilament, or PGA multifilament. The implant sites were assessed for the tensile strength and the extents of material resorption, host inflammatory response and host tissue replacement on days 3, 10, 30, or 60 after the surgery. The PDO and PGA meshes were rapidly pervaded by the host connective tissue with elements of skeletal muscle histogenesis. The degree of adhesions was significantly higher in the Permacol group. All of the prostheses underwent resorption, which correlated with gradual decreases in the overall tensile strength of the site and the Col1a1 gene expression level. Elevated expression of Fgf2 gene maintained longer in the PDO group, and the Mmp9 gene expression level in this group was higher than in the other groups. Gene expression levels of inflammatory cytokines were higher in the Permacol group. The foreign body giant cell numbers were lower in the PDO and Permacol groups than in the PGA group. Minimal macrophage infiltration with predominance of M2 cells was observed in the PDO group. Overall, the PDO prosthesis turned out to be significantly better than the PGA or Permacol prostheses by a number of indicators of biocompatibility and efficacy. © 2018 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 00B: 000-000, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 652-663, 2019.

Biodegradable hyaluronan hydrogel coatings on acellular dermis grafts-A potential strategy to improve biologic graft durability in hernia repair application

Biologic grafts used in hernia repair undergo rapid cellular infiltration and remodeling, but their premature degradation often results in hernia recurrence. We hypothesize that a temporary barrier that prevents infiltration of acute inflammatory cells into the graft during the initial 4 weeks of implantation could mitigate graft degradation. The purpose of this study is to design tyramine-substituted hyaluronan (THA) hydrogel coatings with tunable degradation properties, as a means to develop a resorbable barrier for human acellular dermis grafts (HADM). THA plugs prepared at different cross-linking densities, by varying cross-linking agent concentration (0.0001-0.0075% H₂ O₂ ), demonstrated varying rates of in vitro degradation (25 U/mL hyaluronidase, 48 h). Based on these results, HADM grafts were coated with THA at three cross-linking densities (0.0001%, 0.00075%, and 0.003% H₂ O₂ ) and THA coating degradation was evaluated in vitro (25 U/mL hyaluronidase, 48 h) and in vivo (rat intraperitoneal implantation, 1-4 weeks). THA coatings degraded in vitro and in vivo with the lowest cross-linking density (0.0001% H₂ O₂ ), generally showing greater degradation as evidenced by significant decrease in coating cross-sectional area. However, all three coatings remained partially degraded after 4 weeks of in vivo implantation. Alternate strategies to accelerate in vivo degradation of THA coatings are required to allow investigation of the study hypothesis. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2664-2672, 2019.

Macrophage phenotype switch by sequential action of immunomodulatory cytokines from hydrogel layers on titania nanotubes

Inflammatory response occurring between tissues and implants after implantation has attracted increasing attention because it can cause local tissue necrosis and even implant failure. Macrophages play a key role in all stages of inflammation. Pro-inflammatory (M1) and anti-inflammatory (M2) macrophages comprise two main phenotypes and the switch from M1 to M2 at specific time points is important for wound healing and tissue regeneration. Therefore, we hypothesized that biomaterial systems capable of facilitating macrophage phenotype switching should attenuate inflammation and enhance healing. To this end, a system of double hydrogel layers on titania nanotubes (TNT) was prepared as reservoir to modulate the release of interleukin-4 (IL-4) and interferon-γ (IFN-γ). In this system, IL-4, an anti-inflammatory cytokine, was loaded in TNT and IFN-γ, a pro-inflammatory cytokine, was located between two hydrogel layers of chitosan/β-glycerophosphate disodium and carboxymethyl chitosan/genipin. IFN-γ released rapidly in 3 days, whereas IL-4 exhibited a sustained release profile. In culture with mesenchymal stem cells and macrophages, this system displayed good cytocompatibility and significantly promoted cell proliferation. Macrophage phenotype switch was determined by ELISA, FACS and PCR. The results manifested that IFN-γ released from the system stimulated switching of macrophages to M1 in 3 days, whereas sustained release of IL-4 polarized macrophages to M2 after 4 days. This system can modulate macrophage phenotype switching from M1 to M2 by sequential action of the two cytokines, and might be used to research immune response between tissues and implants. The present study also provided a novel strategy for designing functional biomaterials.

Operative Outcomes after Open Abdominal Wall Reconstruction with Retromuscular Mesh Fixation Using Fibrin Glue versus Transfascial Sutures

Ideal fixation techniques have not been fully elucidated at the time of complex open abdominal wall reconstruction (AWR). We compared operative outcomes and quality of life with retromuscular mesh fixation using fibrin glue (FG) versus transfascial sutures (TS). Retrospective review identified complex hernia patients who underwent open AWR with mesh from November 2012 through April 2016. Multivariate analysis examined postoperative outcomes between groups. Quality of life was assessed using the Carolinas Comfort Scale. Seventy-five patients (18 FG vs 57 TS) with mean age (54.3 vs 53.9 years, P = 0.914), body mass index (35.8 vs 34.7 kg/m2, P = 0.623) and American Society of Anesthesiologist score (2.6 vs 2.5, P = 0.617) were reviewed. No differences in wound (P = 0.072) and nonwound (P = 0.639) related complications were noted between groups. Risk of reoperations (P = 0.275) and 30-day readmissions (P = 0.137) were also comparable. The TS group was twelve times more likely to report pain at six-month follow-up compared with FG (12.29 OR, 95 per cent confidence interval 1.26–120.35, P = 0.031). No hernia recurrences were noted in either group at a mean follow-up of 390 ± 330 days. The use of FG to secure mesh in the retromuscular space during complex open AWR may be a safe alternative to penetrating transfascial fixation with potential to reduce chronic pain.

Biomimetic collagen/elastin meshes for ventral hernia repair in a rat model

Ventral hernia repair remains a major clinical need. Herein, we formulated a type I collagen/elastin crosslinked blend (CollE) for the fabrication of biomimetic meshes for ventral hernia repair. To evaluate the effect of architecture on the performance of the implants, CollE was formulated both as flat sheets (CollE Sheets) and porous scaffolds (CollE Scaffolds). The morphology, hydrophylicity and in vitro degradation were assessed by SEM, water contact angle and differential scanning calorimetry, respectively. The stiffness of the meshes was determined using a constant stretch rate uniaxial tensile test, and compared to that of native tissue. CollE Sheets and Scaffolds were tested in vitro with human bone marrow-derived mesenchymal stem cells (h-BM-MSC), and finally implanted in a rat ventral hernia model. Neovascularization and tissue regeneration within the implants was evaluated at 6weeks, by histology, immunofluorescence, and q-PCR. It was found that CollE Sheets and Scaffolds were not only biomechanically sturdy enough to provide immediate repair of the hernia defect, but also promoted tissue restoration in only 6weeks. In fact, the presence of elastin enhanced the neovascularization in both sheets and scaffolds. Overall, CollE Scaffolds displayed mechanical properties more closely resembling those of native tissue, and induced higher gene expression of the entire marker genes tested, associated with de novo matrix deposition, angiogenesis, adipogenesis and skeletal muscles, compared to CollE Sheets. Altogether, this data suggests that the improved mechanical properties and bioactivity of CollE Sheets and Scaffolds make them valuable candidates for applications of ventral hernia repair.

STATEMENT OF SIGNIFICANCE

Due to the elevated annual number of ventral hernia repair in the US, the lack of successful grafts, the design of innovative biomimetic meshes has become a prime focus in tissue engineering, to promote the repair of the abdominal wall, avoid recurrence. Our meshes (CollE Sheets and Scaffolds) not only showed promising mechanical performance, but also allowed for an efficient neovascularization, resulting in new adipose and muscle tissue formation within the implant, in only 6weeks. In addition, our meshes allowed for the use of the same surgical procedure utilized in clinical practice, with the commercially available grafts. This study represents a significant step in the design of bioactive acellular off-the-shelf biomimetic meshes for ventral hernia repair.

Sarcopenia and sarcopenic obesity in patients with complex abdominal wall hernias

BACKGROUND

Chronic muscle wasting, or sarcopenia, has been associated with poor-health outcomes after major surgical procedures. Here, we explore the utility of CT-generated determinations of sarcopenia as markers of risk in patients undergoing evaluation for complex ventral hernia repair.

METHODS

In 148 successive patients being evaluated for complex ventral hernia repair, CT scans were analyzed retrospectively for attributes of the hernia and indices of core-muscle mass, correlating them with preoperative clinical/laboratory profiles and outcomes in 82 patients who had undergone surgery.

RESULTS

Prevalence of sarcopenia, and sarcopenia corrected for obesity, was 26% and 20% respectively. Sarcopenia was associated with age, some laboratory indicators, and increased hospital length of stay but not with a higher likelihood of surgical site occurrence.

CONCLUSIONS

Obesity may obscure the value of sarcopenia as a marker of metabolic disturbance and postoperative outcome. Image-based measurements of core-muscle mass should be used with caution as predictors of risk in similar surgical populations.

Hydrogel coated mesh decreases tissue reaction resulting from polypropylene mesh implant: implication in hernia repair

PURPOSE

Use of polypropylene mesh (PPM) in hernia repair is associated with tissue reactivity. We examined, in a rat model, a novel non-biodegradable hydrogel coated PPM which may allow for decreased inflammation and a decreased foreign body reaction.

METHODS

Through a dorsal midline incision, a 2 cm × 2 cm section of PPM (either coated or uncoated) was placed on the fascial surface 1.5 cm from the incision on the dorsal wall of Sprague-Dawley rats. At 2 and 12 weeks after placement, the PPM and surrounding tissue were harvested. A board-certified dermatopathologist examined H&E stained slides for fibrosis and foreign body reaction. In addition, tissues were stained for apoptotic cells, oxidative damage, macrophages, fibroblasts, neovascularization and metalloproteases.

RESULTS

At 2 and 12 weeks, there was a greater than 95 % decrease in foreign body giant cells in coated PPM samples compared to uncoated; fibrosis was decreased by 50 %. At 2 and 12 weeks, oxidative damage, fibroblast accumulation, apoptosis and macrophages were significantly decreased in coated PPM samples compared to uncoated PPM.

CONCLUSION

These results demonstrate that a non-biodegradable hydrogel coating of PPM led to significant reduction in foreign body reaction, oxidative stress and apoptosis compared to uncoated PPM in vivo, and suggest that this coating could be clinically useful in hernia repair.

A layered electrospun and woven surgical scaffold to enhance endogenous tendon repair

Surgical reattachments of tendon to bone in the rotator cuff are reported to fail in around 40% of cases. There are no adequate solutions to improve tendon healing currently available. Electrospun, sub-micron materials, have been extensively studied as scaffolds for tendon repair with promising results, but are too weak to be surgically implanted or to mechanically support the healing tendon. To address this, we developed a bonding technique that enables the processing of electrospun sheets into multi-layered, robust, implantable fabrics. Here, we show a first prototype scaffold created with this method, where an electrospun sheet was reinforced with a woven layer. The resulting scaffold presents a maximum suture pull out strength of 167N, closely matched with human rotator cuff tendons, and the desired nanofibre-mediated bioactivity in vitro and in vivo. This type of scaffold has potential for broader application for augmenting other soft tissues.

Tissue integration and inflammatory reaction in full-thickness abdominal wall repair using an innovative composite mesh

PURPOSE

When composite meshes are used in abdominal wall repair, seroma formation may persist and delay the desired integration leading to recurrence. This study compares tissue integration and inflammatory response in abdominal wall repair with composites with different absorbable synthetic barriers.

METHODS

Full-thickness defects created in the abdominal wall of rabbits were repaired using polypropylene prosthesis or the following composites: Physiomesh™ (Phy); Ventralight™ (Vent) and "new composite mesh" (Ncm) not yet used clinically in humans. The collected seroma was evaluated for IFN-γ/IL-4 by ELISA. Tissue integration, anti- (IL-13/TGFβ-1/IL-10/IL-4) and pro-inflammatory (TNF-α/IL-6/IFN-γ/VEGF) cytokine mRNA expression and TGFβ/VEGF immunolabeling were evaluated at 14 and 90 days post-implant.

RESULTS

Seroma was observed in 10 of 12 Phy/Vent and 4 of 12 Ncm. Wound fluid IFN-γ showed a time-dependent significant increase in Vent and tendency to decrease in Ncm, while all composites exhibited IL-4 upward trend. Prostheses were fully infiltrated by an organized connective tissue at end time although the area had shown prior seroma. A stable mesothelium was developed, except in adhesion areas. Vent/Phy displayed a significant increase in TNF-α/IFN-γ-mRNA over time. Significant decrease in VEGF mRNA was observed in Phy/Ncm, while a significant increase of TGFβ-1 mRNA was evident in all composites over time. Ncm exhibited the highest TGFβ protein expression area at short term and the greatest percentage of VEGF positive vessels at end time.

CONCLUSION

Ncm could be an appropriate candidate to improve clinical outcome showing the lower development of seroma and optimal tissue integration with minimal pro-inflammatory cytokine response over time and consistent pro-wound healing cytokine expression.