Bioactive and inert dental glass-ceramics

Biomaterials for bone tissue engineering: achievements to date and future directions

Advancement in medicine and technology has resulted into prevention of countless deaths and increased life span. However, it is important to note that, the modern lifestyle has altered the food habits, witnessed increased life-style stresses and road accidents leading to several health complications and one of the primary victims is the bone health. More often than ever, healthcare professionals encounter cases of massive bone fracture, bone loss and generation of critical sized bone defects. Surgical interventions, through the use of bone grafting techniques are necessary in such cases. Natural bone grafts (allografts, autografts and xenografts) however, have major drawbacks in terms of delayed rehabilitation, lack of appropriate donors, infection and morbidity that shifted the focus of several investigators to the direction of synthetic bone grafts. By employing biomaterials that are based on bone tissue engineering (BTE), synthetic bone grafts provide a more biologically acceptable approach to establishing the phases of bone healing. In BTE, various materials are utilized to support and enhance bone regeneration. Biodegradable polymers like poly-(lactic acid), poly-(glycolic acid), and poly-(ϵ-caprolactone) are commonly used for their customizable mechanical properties and ability to degrade over time, allowing for natural bone growth. PEG is employed in hydrogels to promote cell adhesion and growth. Ceramics, such as hydroxyapatite and beta-tricalcium phosphate (β-TCP) mimic natural bone mineral and support bone cell attachment, withβ-TCP gradually resorbing as new bone forms. Composite materials, including polymer-ceramic and polymer-glasses, combine the benefits of both polymers and ceramics/glasses to offer enhanced mechanical and biological properties. Natural biomaterials like collagen, gelatin, and chitosan provide a natural matrix for cell attachment and tissue formation, with chitosan also offering antimicrobial properties. Hybrid materials such as decellularized bone matrix retain natural bone structure and biological factors, while functionalized scaffolds incorporate growth factors or bioactive molecules to further stimulate bone healing and integration. The current review article provides the critical insights on several biomaterials that could yield to revolutionary improvements in orthopedic medical fields. The introduction section of this article focuses on the statistical information on the requirements of various bone scaffolds globally and its impact on economy. In the later section, anatomy of the human bone, defects and diseases pertaining to human bone, and limitations of natural bone scaffolds and synthetic bone scaffolds were detailed. Biopolymers, bioceramics, and biometals-based biomaterials were discussed in further depth in the sections that followed. The article then concludes with a summary addressing the current trends and the future prospects of potential bone transplants.

Limitations, challenges and prospective solutions for bioactive glasses-based nanocomposites for dental applications: A critical review

Several nanomaterials have been recently used to overcome various challenges in the dental domain. Bioactive glasses, a class of bioceramics, with their outstanding properties including but not limited to their strong biocompatibility, antibacterial characteristics, and bioactivity inside the body's internal milieu have made them valuable biomaterials in a variety of dental domains. The utilization of nanomaterials has improved the performance of teeth, and the incorporation of bioactive glasses has the field of dentistry at an unsurpassed level in different categories such as esthetic and restorative dentistry, periodontics and dental implants, orthodontics, and endodontics. The current study discusses the most recent developments of the bioactive glasses' creation and implementation for dental applications, as well as the challenges and opportunities still facing the field. This work provides an overview of the current obstacles and potential future prospects for bioactive glasses-based nanocomposites to improve their dental uses. It also emphasizes the great potential synergistic effects of bioactive glasses used with other nanomaterials for dental applications.

Advances in ceramics for tooth repair: From bench to chairside

OBJECTIVES

To give a comprehensive review of advancement in dental ceramics, fabrication methods, and the challenges associated with clinical application.

DATA, SOURCES AND STUDY SELECTION

Researches on chemical composition, biomechanical behaviors, optical properties, bonding strategies and fabrication methods were included. The search of articles was independently conducted by two authors in the PubMed, Scopus, Medline and Web of Science.

CONCLUSIONS

Dental ceramics have shown significant advancements in terms of esthetics and function. However, improving fracture toughness without compromising optical properties remains a challenge. Repairing fractured zirconia or glass-matrix ceramic prostheses with the same material is difficult due to the sintering process. Developing innovative bonding techniques that provide strong and long-lasting bonding strength between ceramics and tooth structures poses a recurring obstacle.

CLINICAL SIGNIFICANCE

Despite the emergence of dental ceramics and fabrication techniques, certain limitations such as susceptibility to brittleness and fracture still exist. Therefore, the current review provided valuable information around the advanced dental ceramics in tooth repair. The laboratory test data and the clinical outcome are also presented in details, aiming to guide clinicians in making informed decisions regarding ceramic restorations.

Evaluation of bond strength between zirconia milled ceramic material and veneered dental porcelain

This study aimed at examining the bond strength between zirconia and ceramic veneer, following the ISO 9693 guidelines. A total of fifty specimens of zirconia/ceramic-veneer system were produced using two commercial zirconias (VITA YZ-HTWhite and Zolid HT+ White, referred to as Group A and Group B, respectively) and a ceramic-veneering material (Zirkonia 750). The microstructure (via x-ray diffraction analysis, XRD and Secondary Electron mode, SEM) and the mechanical properties (via 3-point bending tests) of the two groups were assessed. Then, experiments were conducted according to the ISO 9693 and conventional protocols applied for producing zirconia/ceramic-veneer restorations. Bond strength values, measured by 3-point bending tests, were 34.42 ± 7.60 MPa for Group A and 31.92 ± 6.95 MPa for Group B. SEM observations of the cohesively fractured surfaces (on the porcelain side) and the examination for normality using the Shapiro-Wilk test suggested the use of Weibull statistical analysis. Median strength (σ50%) for Group A and Group B was 34.76 and 32.22 MPa, while the characteristic strength (σ63.2%) was 35.78 and 33.14 MPa, respectively. The Weibull modulus disparity between groups (12.69 and 13.07) was not significant. Bond strength exceeded the ISO 9693 minimum of 20 MPa, suggesting satisfactory strength for clinical use.

Exploring the potential of calcium-based biomaterials for bone regeneration in dentistry: a systematic review

INTRODUCTION

Regenerative medicine emerged as a promising strategy for addressing bone defects, with several bone grafts currently being used, including autografts, allografts, xenografts and alloplasts. Calcium-based biomaterials (CaXs), a well-known class of synthetic materials, have demonstrated good biological properties and are being investigated for their potential to facilitate bone regeneration. This systematic review evaluates the current clinical applications of CaXs in dentistry for bone regeneration.

EVIDENCE ACQUISITION

A comprehensive search was conducted to collect information about CaXs and their applications in the dental field over the last ten years. The search was limited to relevant articles published in peer-reviewed journals.

EVIDENCE SYNTHESIS

A total of 72 articles were included in this scoping review, with eight studies related to periodontology, 63 in implantology and three in maxillofacial surgery respectively. The findings suggest that CaXs hold promise as an alternative intervention for minor bone regeneration in dentistry.

CONCLUSIONS

Calcium-based biomaterials have shown potential as a viable option for bone regeneration in dentistry. Further research is warranted to fully understand their efficacy and safety in larger bone defects. CaXs represent an exciting avenue for researchers and clinicians to explore in their ongoing efforts to advance regenerative medicine.

One-piece versus two-piece ceramic dental implants

In this narrative review, a structured comparison between one-piece and two-piece zirconia dental implants is highlighted. Ceramic dental implants have long ceased to be hype; on the contrary, they can offer a significant addition to the daily dental implant practice. Not only do their favourable aesthetics play a significant role, but their ability to work completely metal-free is of added value, particularly for patients with a proven allergy for Grade 5 titanium. Furthermore, the fact that peri-implantitis seems to appear only incidentally is an important supporting argument for their use as well. Whereas the original design of zirconia implants was formerly always of a one-piece/one-phase structure (the monobloc design), nowadays, two-piece/two-phase designs (the so-called hybrid concept) are also widely utilised to restore missing teeth. Both concepts have advantages and disadvantages, scientifically as well as clinically.For this paper, relevant articles from the recent scientific literature were selected from PubMed. The aim was to identify and summarise what has previously been published on one-piece versus two-piece ceramic implants. This article will compare the benefits and drawbacks of one-piece versus two-piece ceramic implants based on clinical- (design, different sizes, surgical protocol, prosthetics), scientific- (loading and eventual complications) and patient-related (costs and long-time perspectives) criteria.

Biosafety and chemical solubility studies of multiscale crystal-reinforced lithium disilicate glass-ceramics

Lithium disilicate (Li2 Si2 O5 ) glass-ceramics are currently a more widely used all-ceramic restorative material due to their good mechanical properties and excellent aesthetic properties. However, they have a series of problems such as high brittleness and low fracture toughness, which has become the main bottleneck restricting its development. Therefore, in order to compensate for these shortcomings, we propose to prepare a reinforced glass-ceramics with better mechanical properties and to test the biosafety and chemical solubility of the material. Li2 Si2 O5 whiskers were synthesized by a one-step hydrothermal method, and multi-scale crystal-enhanced Li2 Si2 O5 glass-ceramics were prepared by reaction sintering. The biosafety of multi-scale crystal-reinforced Li2 Si2 O5 glass-ceramics was investigated by in vitro cytotoxicity test, rabbit pyrogen test, mice bone marrow micronucleus test, skin sensitization test, sub-chronic systemic toxicity test, and chronic systemic toxicity test. Additionally, the chemical solubility of multi-scale crystal-reinforced Li2 Si2 O5 glass-ceramics was investigated. The test results showed that the material was non-cytotoxic, non-thermogenic, non-mutagenic, non-sensitizing, and non-systemic. The chemical solubility, determined to be 377 ± 245 μg/cm2 , complied with the ISO 6872 standard for the maximum solubility of ceramic materials. Multi-scale crystal-reinforced Li2 Si2 O5 glass-ceramics' biosafety and chemical solubility met current normative criteria, and they can move on to mechanical property measurements (such as flexural strength test, fatigue life test, friction and wear property study, etc.) and bonding property optimization, which shows promise for future clinical applications.

Microstructure, physical and mechanical properties of dental polychromic multilayer zirconia of uniform composition

The present study aimed to compare the microstructure, physical, and mechanical properties of three commercially available dental polychromatic multilayer zirconia materials of uniform composition: Dima Mill Zirconia ML, VITA YZ/ST Multicolor, and VITA YZ/XT Multicolor (with 3, 4, and 5 mol% Y2 O3 , respectively); thus, the influence of Y2 O3 content on the above properties of the produced materials was experimentally studied. Homogeneous zirconia ceramics with a dense micro- and nanostructure, without pores or defects, were produced after milling the blocks and sintering, which resulted in yttrium-stabilized tetragonal and cubic zirconia. Statistical analysis of the results of measurable magnitudes was performed by the one-way ANOVA test. The increase of Y2 O3 content (from 3 to 5 mol%) favored larger grain and crystallite sizes and a decrease of the values of the mechanical properties; yet, the differences were statistically insignificant. Clinically, these differences are expected to have no impact on their function in the oral cavity, both in terms of their fracture propensity and the damage that can be caused to the opposing teeth. Accordingly, the experimental results qualify the polychromic multilayer zirconia ceramics of uniform composition fabricated by milling technology for use in dental restorations.

Extracellular and intracellular effects of bioactive glass nanoparticles on osteogenic differentiation of bone marrow mesenchymal stem cells and bone regeneration in zebrafish osteoporosis model

Bioactive glass nanoparticles (BGNs) are well-recognized multifunctional biomaterials for bone tissue regeneration due to their capability to stimulate various cellular processes through released biologically active ions. Understanding the correlation between BGN composition and cellular responses is key to developing clinically usable BGN-based medical devices. This study investigated the influence of CaO content of binary SiO2-CaO BGNs (CaO ranging from 0 to 10 mol%) on osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) and in vivo bone regeneration in zebrafish osteoporosis model. The results showed that BGNs could promote osteogenic differentiation of rBMSCs by indirectly releasing active ions or directly interacting with rBMSCs by internalization. In both situations, BGNs of a higher CaO content could promote the osteogenic differentiation of rBMSCs to a greater extent. The internalized BGNs could activate the transcription factors RUNX2 and OSX, leading to the expression of osteogenesis-related genes. The results in the zebrafish osteoporosis model indicated that the presence of BGNs of higher CaO contents could enhance bone regeneration and rescue dexamethasone-induced osteoporosis to a greater extent. These findings demonstrate that BGNs can stimulate osteogenic differentiation of rBMSCs by releasing active ions or internalization. A higher CaO content facilitates osteogenesis and bone regeneration of zebrafish as well as relieving dexamethasone-induced osteoporosis. The zebrafish osteoporosis model can be a potent tool for evaluating the in vivo bone regeneration effects of bioactive materials. STATEMENT OF SIGNIFICANCE: Bioactive glass nanoparticles (BGNs) are increasingly used as fillers of nanocomposites or as delivery platforms of active ions to regenerate bone tissue. Various studies have shown that BGNs can enhance osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) by releasing active ions. However, the correlation between BGN composition and cellular responses and in vivo bone regeneration effect has still not been well investigated. Establishment of a suitable in vivo animal model for investigating this correlation is also challenging. The present study reports the influence of CaO content in binary SiO2-CaO BGNs on osteogenic differentiation of BMSCs extracellularly and intracellularly. This study also demonstrates the suitability of zebrafish osteoporosis model to investigate in vivo bone regeneration effect of BGNs.

Porous Lithium Disilicate Glass-Ceramics Prepared by Cold Sintering Process Associated with Post-Annealing Technique

Using melt-derived LD glass powders and 5-20 M NaOH solutions, porous lithium disilicate (Li2Si2O5, LD) glass-ceramics were prepared by the cold sintering process (CSP) associated with the post-annealing technique. In this novel technique, H2O vapor originating from condensation reactions between residual Si-OH groups in cold-sintered LD glasses played the role of a foaming agent. With the increasing concentration of NaOH solutions, many more residual Si-OH groups appeared, and then rising trends in number as well as size were found for spherical pores formed in the resultant porous LD glass-ceramics. Correspondingly, the total porosities and average pore sizes varied from 25.6 ± 1.3% to 48.6 ± 1.9% and from 1.89 ± 0.68 μm to 13.40 ± 10.27 μm, respectively. Meanwhile, both the volume fractions and average aspect ratios of precipitated LD crystals within their pore walls presented progressively increasing tendencies, ranging from 55.75% to 76.85% and from 4.18 to 6.53, respectively. Young's modulus and the hardness of pore walls for resultant porous LD glass-ceramics presented remarkable enhancement from 56.9 ± 2.5 GPa to 79.1 ± 2.1 GPa and from 4.6 ± 0.9 GPa to 8.1 ± 0.8 GPa, whereas their biaxial flexural strengths dropped from 152.0 ± 6.8 MPa to 77.4 ± 5.4 MPa. Using H2O vapor as a foaming agent, this work reveals that CSP associated with the post-annealing technique is a feasible and eco-friendly methodology by which to prepare porous glass-ceramics.

Lithiated porous silicon nanowires stimulate periodontal regeneration

Periodontal disease is a significant burden for oral health, causing progressive and irreversible damage to the support structure of the tooth. This complex structure, the periodontium, is composed of interconnected soft and mineralised tissues, posing a challenge for regenerative approaches. Materials combining silicon and lithium are widely studied in periodontal regeneration, as they stimulate bone repair via silicic acid release while providing regenerative stimuli through lithium activation of the Wnt/β-catenin pathway. Yet, existing materials for combined lithium and silicon release have limited control over ion release amounts and kinetics. Porous silicon can provide controlled silicic acid release, inducing osteogenesis to support bone regeneration. Prelithiation, a strategy developed for battery technology, can introduce large, controllable amounts of lithium within porous silicon, but yields a highly reactive material, unsuitable for biomedicine. This work debuts a strategy to lithiate porous silicon nanowires (LipSiNs) which generates a biocompatible and bioresorbable material. LipSiNs incorporate lithium to between 1% and 40% of silicon content, releasing lithium and silicic acid in a tailorable fashion from days to weeks. LipSiNs combine osteogenic, cementogenic and Wnt/β-catenin stimuli to regenerate bone, cementum and periodontal ligament fibres in a murine periodontal defect.

Criteria for choosing prosthetic biomaterials according to their physicochemical properties for anterior and posterior sectors. a comprehensive review

Objective

To describe the existing knowledge about metal-free prosthetic biomaterials according to their physicochemical properties and based on this, define criteria for their placement in both the anterior and posterior sectors.

Materials and methods

A digital search was carried out in the databases: PubMed/Medline, Scopus, Web of Science and Google Scholar of the literature published in the English language without time restrictions and included original articles such as case reports, retrospective and prospective studies, narrative, comprehensive, systematic reviews and meta-analysis. Meanwhile, short communications, editorials and articles in a language other than English were excluded.

Results

40 articles were evaluated, published between 2000 and 2023. The main characteristics and physicochemical properties of ceramic biomaterials such as zirconia, feldspathic based ceramics, lithium disilicate and alumina, among others, were analyzed and summarized. In addition, certain criteria were defined based on the available scientific evidence on the use of different ceramic systems both in the anterior sector and in the posterior sector for patients who need some type of prosthetic restoration.

Conclusions

Among the different metal-free materials used for the construction of fixed dental prostheses, zirconia has been shown to have better aesthetic, biomechanical and biocompatibility properties, which makes it a candidate material for the rehabilitation of partially edentulous patients.

Recent advances in glass-ceramics: Performance and toughening mechanisms in restorative dentistry

The use of glass-ceramics in the medical field has grown significantly since the 1980s. With excellent aesthetic properties, semi-translucency, outstanding mechanical properties, corrosion resistance, wear resistance and great biocompatibility and workability glass-ceramics is one of the most commonly used materials in restorative dentistry and is widely used in veneers, inlays, onlays, all-ceramic crowns, and implant abutments. This review provides an overview of the research progress of glass-ceramics in restorative dentistry, focusing on the classification, performance requirements, toughening mechanisms and their association with clinical performance, as well as the manufacturing and fabrication of glass-ceramics in restorative dentistry. Finally, the developments and prospects of glass-ceramics in restorative dentistry are summarized and discussed.

Microstructural features, physicο-mechanical properties, and wear behavior of dental translucent polychromic multilayer zirconia of hybrid composition prepared by milling technology

OBJECTIVE

The present study determined the mechanical properties and the wear behavior, as results of the micro(nano)structure, of the enamel, transition, and dentine layers, which comprise the polychromic multilayer zirconia materials of hybrid composition fabricated by milling technology.

MATERIALS AND METHODS

Prismatic blocks were fabricated from two commercial pre-sintered dental polychromic multilayer zirconia materials of hybrid composition, IPS e.max ZirCAD Prime (medium and high translucency, from the dentine to the incisal layer) and 3D Pro ML (translucency gradient, from the dentine to the incisal layer) by milling technique, and then, cut into 3 distinct parts to separate the enamel, transition, and dentine layers. The samples were sintered, thermally treated (similarly to the glazing procedure), and polished for characterization. Their microstructure, mechanical properties (determined by nanoindentation and microhardness), and wear behavior (evaluated by scratch test), were examined.

RESULTS

The produced materials had a homogeneous and dense nanostructure, where the grain size decreased from the enamel to dentine layer. The mechanical properties decreased from the dentine to enamel layer. However, the three layers manifested similar dynamic friction coefficient.

CONCLUSION

The differences in the above properties in the three layers negligibly influenced the wear behavior of the entire multilayer zirconia material.

CLINICAL SIGNIFICANCE

The properties of dental restorations produced from polychromic multilayer zirconia of hybrid composition by milling technology (i.e., strong, non-fragile, and esthetic materials), anticipate good performance in oral cavity.

Phase transformation and mechanical properties of new bioactive glass-ceramics derived from CaO-P2O5-Na2O-B2O3-SiO2 glass system

This work investigates the role of sintering temperature on bioactive glass-ceramics derived from the new composition CaO-P2O5-Na2O-B2O3-SiO2 glass system. The sintering behaviour of the samples' physical, structural, and mechanical properties is highlighted in this study. The experimental results indicated that the sintering process improved the crystallization and hardness of the final product. Results from XRD and FTIR showed the existence of carbonate apatite, pseudo-wollastonite, and wollastonite phases. From the results, the bioglass-ceramics sintered at 700 °C obtained the highest densification and optimum mechanical results. It had the value of 5.34 ± 0.21 GPa regarding microhardness and 2.99 ± 0.24 MPa m1/2 concerning fracture toughness, which falls in the range of the human enamel. Also, the sintered samples maintained their bioactivity and biodegradability after being tested in the PBS medium. The bioactivity does not affect but slows down the apatite formation rate. Overall results promoted the novel bioglass-ceramics as a candidate material for dental application.

Dental Materials Applied to 3D and 4D Printing Technologies: A Review

As computer-aided design and computer-aided manufacturing (CAD/CAM) technologies have matured, three-dimensional (3D) printing materials suitable for dentistry have attracted considerable research interest, owing to their high efficiency and low cost for clinical treatment. Three-dimensional printing technology, also known as additive manufacturing, has developed rapidly over the last forty years, with gradual application in various fields from industry to dental sciences. Four-dimensional (4D) printing, defined as the fabrication of complex spontaneous structures that change over time in response to external stimuli in expected ways, includes the increasingly popular bioprinting. Existing 3D printing materials have varied characteristics and scopes of application; therefore, categorization is required. This review aims to classify, summarize, and discuss dental materials for 3D printing and 4D printing from a clinical perspective. Based on these, this review describes four major materials, i.e., polymers, metals, ceramics, and biomaterials. The manufacturing process of 3D printing and 4D printing materials, their characteristics, applicable printing technologies, and clinical application scope are described in detail. Furthermore, the development of composite materials for 3D printing is the main focus of future research, as combining multiple materials can improve the materials' properties. Updates in material sciences play important roles in dentistry; hence, the emergence of newer materials are expected to promote further innovations in dentistry.

Pre-cementation treatment of glass-ceramics with vacuum impregnated resin coatings

OBJECTIVE

The study aimed to investigate the effectiveness of a vacuum impregnation process to eliminate the porosity at the ceramic-resin interface to optimize the reinforcement of a glass-ceramic by resin cementation.

METHODS

100 leucite glass-ceramic disks (1.0 ± 0.1 mm thickness) were air-abraded, etched with 9.6 % HF acid, and silanated. Specimens were randomly allocated to 5 groups (n = 20). Group A received no further treatment (uncoated control). Groups B and D were resin-coated under atmospheric pressure, whereas groups C and E were resin-coated using vacuum impregnation. The polymerized resin-coating surfaces of specimens in groups B and C were polished to achieve a resin thickness of 100 ± 10 µm, while in groups D and E no resin-coating modification was performed prior to bi-axial flexure strength (BFS) determination. Optical microscopy was undertaken on the fracture fragments to identify the failure mode and origin. Comparisons of BFS group means were made by a one-way analysis of variance (ANOVA) and post-hoc Tukey test at α = 0.05.

RESULTS

All resin-coated sample groups (B-E) showed a statistically significant increase in mean BFS compared with the uncoated control (p < 0.01). There was a significant difference in BFS between the ambient and vacuum impregnated unpolished groups (D and E) (p < 0.01), with the greatest strengthening achieved using a vacuum impregnation technique.

SIGNIFICANCE

Results highlight the opportunity to further develop processes to apply thin conformal resin coatings, applied as a pre-cementation step to strengthen dental glass-ceramics.

Edge chipping damage in lithium silicate glass-ceramics induced by conventional and ultrasonic vibration-assisted diamond machining

OBJECTIVES

Diamond machining of lithium silicate glass-ceramics (LS) induces extensive edge chipping damage, detrimentally affecting LS restoration functionality and long-term performance. This study approached novel ultrasonic vibration-assisted machining of pre-crystallized and crystallized LS materials to investigate induced edge chipping damage in comparison with conventional machining.

METHODS

The vibration-assisted diamond machining was conducted using a five-axis ultrasonic high-speed grinding/machining machine at different vibration amplitudes while conventional machining was performed using the same machine without vibration assistance. LS microstructural characterization and phase development were performed using scanning electron microscopy (SEM) and x-ray diffraction (XRD) techniques. Machining-induced edge chipping depths, areas and morphology were also characterized using the SEM and Java-based imaging software.

RESULTS

All machining-induced edge chipping damages resulted from brittle fractures. The damage scales, however, depended on the material microstructures; mechanical properties associated with the fracture toughness, critical strain energy release rates, brittleness indices, and machinability indices; and ultrasonic vibration amplitudes. Pre-crystallized LS with more glass matrix and lithium metasilicate crystals yielded respective 1.8 and 1.6 times greater damage depths and specific damage areas than crystallized LS with less glass matrix and tri-crystal phases in conventional machining. Ultrasonic machining at optimized amplitudes diminished such damages by over 50 % in pre-crystallized LS and up to 13 % in crystallized LS.

SIGNIFICANCE

This research highlights that ultrasonic vibration assistance at optimized conditions may advance current dental CAD/CAM machining techniques by significant suppression of edge chipping damage in pre-crystallized LS.

A New Mass Spectroscopy-Based Method for Assessing the Periodontal-Endodontic Interface after Intracanal Placement of Biomaterials In Vitro

Optimizing the interface between biomaterials and dental hard tissues can prevent leakage of bacteria or inflammatory mediators into periapical tissues and thus avoid alveolar bone inflammation. In this study, an analysis system for testing the periodontal-endodontic interface using gas leakage and subsequent mass spectrometry was developed and validated using the roots of 15 single-rooted teeth in four groups: (I) roots without root canal filling, (II) roots with an inserted gutta-percha post without sealer, (III) roots with gutta-percha post and sealer, (IV) roots filled with sealer only, and (V) adhesively covered roots. Helium was used as the test gas, and its leakage rate was found by measuring the rising ion current using mass spectrometry. This system made it possible to differentiate between the leakage rates of tooth specimens with different fillings. Roots without filling showed the highest leakage values (p < 0.05). Specimens with a gutta-percha post without sealer showed statistically significantly higher leakage values than groups with a filling of gutta-percha and sealer or sealer alone (p < 0.05). This study shows that a standardized analysis system can be developed for periodontal-endodontic interfaces to prevent biomaterials and tissue degradation products from affecting the surrounding alveolar bone tissue.

Preparation and characterization of lithium disilicate-fluorcanasite glass-ceramics for dental applications

The purpose of this research is to discuss the preparation, characterization, and characteristics of lithium disilicate-fluorcanasite (LF) glass-ceramics in order to develop new dental glass-ceramics. A typical melt quenching method was used to produce the lithium disilicate (LD) and fluorcanasite (FC) types of glass. Following that, the LD and FC glass frits were combined and remelted in the following LD:FC ratios of 100:0, 0:100, 75:25, and 50:50 wt%, represented by S1, S2, S3, and S4, respectively. Based on the thermal analysis data, the glass-ceramic samples were fabricated through the heat treatment method. XRD and SEM were used to characterize the phase formation and microstructures of the prepared glass-ceramics. Archimedes' principle, three-point bending, and chemical solubility tests were used to determine density, flexural strength, and chemical solubility, respectively. The elastic modulus and fracture toughness of the selected samples were also evaluated using a Vickers hardness test. It was found that the S3 glass-ceramic sample (S3-789) has a longer LD crystalline phase than that of the S4 glass-ceramic sample (S4-788), resulting in a higher density and hardness. Furthermore, the S3-789 sample had by far the greatest Vickers hardness, elastic modulus, fracture toughness, and flexural strength, so it was chosen for future study to assess its bioactivity in SBF due to its superior mechanical properties and good machinability. The SBF bioactivity test validated the S3-789 sample's high bioactive performance. As a result, the S3-789 sample may be a good option for use as a novel material in dental applications.

Bio-Activated PEEK: Promising Platforms for Improving Osteogenesis through Modulating Macrophage Polarization

The attention on orthopedic biomaterials has shifted from their direct osteogenic properties to their osteoimmunomodulation, especially the modulation of macrophage polarization. Presently, advanced technologies endow polyetheretherketone (PEEK) with good osteoimmunomodulation by modifying PEEK surface characteristics or incorporating bioactive substances with regulating macrophage polarization. Recent studies have demonstrated that the fabrication of a hydrophilic surface and the incorporation of bioactive substances into PEEK (e.g., zinc, calcium, and phosphate) are good strategies to promote osteogenesis by enhancing the polarization of M2 macrophages. Furthermore, the modification by other osteoimmunomodulatory composites (e.g., lncRNA-MM2P, IL-4, IL-10, and chitosan) and their controlled and desired release may make PEEK an optimal bio-activated implant for regulating and balancing the osteogenic system and immune system. The purpose of this review is to comprehensively evaluate the potential of bio-activated PEEK in polarizing macrophages into M2 phenotype to improve osteogenesis. For this objective, we retrieved and discussed different kinds of bio-activated PEEK regarding improving osteogenesis through modulating macrophage polarization. Meanwhile, the relevant challenges and outlook were presented. We hope that this review can shed light on the development of bio-activated PEEK with more favorable osteoimmunomodulation.

Antibacterial activity improvement of dental glass-ceramic by incorporation of AgVO3 nanoparticles

OBJECTIVE

This study aimed to investigate the role of the incorporation of an antibacterial nanoceramic (AgVO₃) on the properties of a restorative dental glass-ceramic.

METHOD

A commercially available restorative glass-ceramic, commonly designated as porcelain (IPS d.SIGN) was functionalized with an antibacterial agent (nanostructured β-AgVO₃), synthesized by a hydrothermal route. Both functionalized and pristine samples were processed according to the manufacturer's instructions. All samples were characterized by X-ray diffraction, Rietveld refinement, particle size distribution, Scanning Electron Microscopy, chemical solubility, and Inductively Coupled Plasma Spectroscopy. Their antibacterial potential (Mueller-Hinton test) was analyzed against gram-positive (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli).

RESULTS

The commercial glass-ceramic showed leucite (KAlSi₂O₆) as the only detectable crystalline phase, and, for both strains, no antibacterial activity could be detected in the Mueller-Hinton agar plates test. A monophasic, needle-shaped, and nanometric β-AgVO₃ powder was successfully synthesized by a simple hydrothermal route. After thermal treatment, glass-ceramic samples containing different percentages of β-AgVO₃ showed a second crystalline phase of microline [K_0.95(AlSi₃O₈)]. For modified samples, inhibition halos were easily visible on the Mueller-Hinton test, which ranged from 11.1 ± 0.5 mm to 16.6 ± 0.5 mm and 12.7 ± 0.3 mm to 15.5 ± 0.3 mm in the S. aureus and E.coli cultures, respectively, showing that the halos formed were dose-dependent. Also, increasing the percentage of β-AgVO₃ promoted a significant increase in chemical solubility, from 72 µg/cm² (samples with 1 wt% of β-AgVO₃) to 136 µg/cm² (samples with 2 wt% of β-AgVO₃), which was associated with the silver and vanadium ions released from the glass matrix.

SIGNIFICANCE

Our in vitro results indicate that IPS d.SIGN, as most of the dental glass-ceramics, do not exhibit antibacterial activity per se. Nonetheless, in this concept test, we demonstrated that it is possible to modify dental veneering materials giving them antibacterial properties by adding at least 2 wt% of β-AgVO₃, a nanomaterial easily synthesized by a simple route.

On the Mechanical Properties of Hybrid Dental Materials for CAD/CAM Restorations

Two hybrid dental materials available for computer-aided design and manufacturing (CAD/CAM) dental restorations have been selected to explore their potential. On the one hand, the scarcely investigated polymer-based material Vita Enamic^® (VE) and, on the other hand, the leucite-based material IPS Empress^® CAD (EC). Their micro-structure and mechanical performance were analyzed in two environments: directly as received by the manufacturer (AR), and after immersion and storage in artificial saliva (AS) for 30 days to determine the influence of the saliva effect. To avoid an inappropriate selection of materials for clinical use, a full understanding of their mechanical behavior is essential. Therefore, this investigation aims to determine the micro-structural and chemical composition by field emission scanning electron microscopy (FE-SEM) and X-ray fluorescence analysis, establishing the density, micro- and nano-hardness, the nano-elastic modulus, and the flexural strength and fracture toughness (by introducing a femto-laser notch to replicate a real crack). In addition, fracture surfaces of the broken samples were analyzed to correlate the failure micro-mechanisms with their mechanical properties. Results indicate that while the crystalline phase of the materials is very similar (composed of SiO₂ and Al₂O₃), the micro-structure and mechanical behavior is not. The material EC, with finer micro-structure, exhibits a higher mechanical performance but with greater variability of results. Furthermore, the material VE, with a 25 vol.% polymer phase, shows a mechanical performance similar to enamel and dentin and therefore more similar to human behavior.

In Vivo Evaluation of the Effects of Sintering Temperature on the Optical Properties of Dental Glass-Ceramics

In prosthodontics, the ability of glass-ceramics to express the optical properties of natural teeth is an important goal of esthetic restorations. Dental restorations do not merely need to be similar in color to natural teeth; proper optical properties, such as opalescence, transparency, etc., must be combined in order to achieve excellent esthetic effects. The optical properties of ceramic materials are mainly distinguished by different hues (e.g., A, B, C, and D) combined with translucency (e.g., high translucency (HT), medium translucency (MT), low translucency (LT), and medium opacity (MO)). However, there are many varieties of tooth color. Therefore, it is expected that glass-ceramics can change their nanocrystal size and porosity through different heat-treatment temperatures and times and, thereby, present different transparency effects. This study mainly analyzed the influence of changes in sintering temperature on the optical properties of glass-ceramics. The optical properties of glass-ceramics in the oral cavity were evaluated with human trials. We hypothesized that (1) the transparency of glass-ceramics can be changed by controlling the sintering temperature and (2) glass-ceramics modified by the sintering temperature can be suitable for clinical applications. Results showed that the transparency decreased, the nanoparticle size increased, the crystallinity increased, and the surface hardness decreased as the sintering temperature increased. High-brightness glass-ceramics have more-sensitive optical properties. Results of clinical trials showed that glass-ceramics whose transparency was changed by controlling the sintering temperature can be candidates for clinical applications. Based on the above results, the hypotheses of this study were supported. In the future, we will continue to explore the esthetic field of dental restorations.

Influence of heat treatment on the microstructure and the physical and mechanical properties of dental highly translucent zirconia

PURPOSE

Microstructural and physico-mechanical characterization of highly translucent zirconia, prepared by milling technology (CAD-CAM) and repeated firing cycles, was the main aim of this in vitro study.

MATERIALS AND METHODS

Two groups of samples of two commercial highly-translucent yttria-stabilized dental zirconia, VITA YZ-HTWhite (Group A) and Zolid HT + White (Group B), with dimensions according to the ISO 6872 "Dentistry - Ceramic materials", were prepared. The specimens of each group were divided into two subgroups. The specimens of the first subgroups (Group A1 and Group B1) were merely the sintered specimens. The specimens of the second subgroups (Group A2 and Group B2) were subjected to 4 heat treatment cycles. The microstructural features (microstructure, density, grain size, crystalline phases, and crystallite size) and four mechanical properties (flexural strength, modulus of elasticity, Vickers hardness, and fracture toughness) of the subgroups (i.e. before and after heat treatment) were compared. The statistical significance between the subgroups (A1/A2, and B1/B2) was evaluated by the t-test. In all tests, P values smaller than 5% were considered statistically significant.

RESULTS

A homogenous microstructure, with no residual porosity and grains sized between 500 and 450 nm for group A and B, respectively, was observed. Crystalline yttria-stabilized tetragonal zirconia was exclusively registered in the X-ray diffractograms. The mechanical properties decreased after the heat treatment procedure, but the differences were not statistically significant.

CONCLUSION

The produced zirconia ceramic materials can be safely (i.e., according to the ISO 6872) used in extensive fixed prosthetic restorations, such as substructure ceramics for three-unit prostheses involving the molar restoration and substructure ceramics for prostheses involving four or more units. Consequently, milling technology is an effective manufacturing technology for producing zirconia substructures for dental fixed all-ceramic prosthetic restorations.

Endosseous Dental Implant Materials and Clinical Outcomes of Different Alloys: A Systematic Review

In recent years, implantology has made significant progress, as it has now become a safe and predictable practice. The development of new geometries, primary and secondary, of new surfaces and alloys, has made this possible. The purpose of this review is to analyze the different alloys present on the market, such as that in zirconia, and evaluate their clinical differences with those most commonly used, such as those in grade IV titanium. The review, conducted on major scientific databases such as Scopus, PubMed, Web of Science and MDPI yielded a startling number of 305 results. After the application of the filters and the evaluation of the results in the review, only 10 Randomized Clinical Trials (RCTs) were included. Multiple outcomes were considered, such as Marginal Bone Level (MBL), Bleeding on Probing (BoP), Survival Rate, Success Rate and parameters related to aesthetic and prosthetic factors. There are currently no statistically significant differences between the use of zirconia implants and titanium implants, neither for fixed prosthetic restorations nor for overdenture restorations. Only the cases reported complain about the rigidity and, therefore, the possibility of fracture of the zirconium. Certainly the continuous improvement in these materials will ensure that they could be used safely while maintaining their high aesthetic performance.

Biosafety evaluation of Li2Si2O5 whisker-reinforced glass-ceramics

Lithium disilicate (Li2Si2O5) glass-ceramic is a commonly used dental ceramic material. In this study, Li2Si2O5 whiskers were prepared by the hydrothermal method, mixed with Li2Si2O5 glass powders, and Li2Si2O5 whisker-reinforced glass-ceramics were prepared by reaction sintering. The biosafety of the new Li2Si2O5 glass-ceramics were evaluated by in vitro cytotoxicity, hemolysis, oral mucosal irritation, acute systemic toxicity, and subacute systemic toxicity (oral route) tests according to ISO 7405/ISO 10993 standards. The cytotoxicity test results showed that the cell growth of the experimental group was good, and the cell number and morphology were not significantly different from those of the blank group (P > 0.05). The toxicity grading for both experimental and blank control groups were 0. The hemolysis rate of the material was 1.25%, which indicated that it did not cause hemolytic reaction. The material was non-irritating to the oral mucosa. In acute systemic toxicity test, animals in the experimental group showed increased body weight, moved freely, with no signs of poisoning. The food utilization rate and relative growth rate (change of the weight) of rats in the subacute systemic toxicity test were not statistically different from those of the control group (P > 0.05). Preliminary evaluation of the biosafety of the Li2Si2O5 whisker-reinforced glass-ceramics showed that it met the existing regulatory standards, and further biosafety experiments can be conducted, following which the material may be expected to be applied in clinical practice.

Improving early running-in wear characteristics for dental lithium disilicate glass-ceramics by ion-exchange

OBJECTIVES

This study examined the effects of Li⁺→Na⁺ ion-exchange on the early wear performance of dental lithium disilicate (LD) glass-ceramics.

METHODS

Specimens with different shapes were prepared using IPS e.max Press as the LD glass-ceramics. Ion-exchange was conducted by placing polished specimens in molten salt containing 25% NaNO₃ and 75% KNO₃ at 385 °C for 16 or 64 h. The ion-exchanged specimens were analyzed using X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS) to investigate the structure and the elemental distribution. Thereafter, the specimens were tested for flexural strength, Vickers hardness, and fracture resistance. A portion of the specimens were tested with a pin-on-disk tribometer with 10 N for 40 × 10⁴ wear cycles in artificial saliva. Wear analysis of the specimens was performed using a 3D profilometer and analyzed with one-way analyses of variance and Tukey's post hoc pairwise comparisons. Worn surfaces were examined with scanning electron microscopy.

RESULTS

The LD glass-ceramics exhibited strong time-dependent wear behavior, with typical running-in and steady wear stages. Ion-exchange treatments at 385 °C for 16 h and 64 h both enhanced the mechanical properties and decreased the wear rates of early running-in wear stage. The early wear performance of specimens treated with ion-exchange for long time (64 h) was improved significantly.

CONCLUSION

A thicker ion-exchange layer may be obtained by processing ion-exchange for a long time. This protocol improves the early wear performance of the glass-ceramics effectively.

CLINICAL SIGNIFICANCE

Dental restorations may fail prematurely due to excessive wear. It is important to improve the early wear performance of the glass-ceramics. Ion-exchange has the potential to strengthen dental LD glass-ceramics. Understanding the effect of ion-exchange on the early wear performance of glass-ceramics provides insight improving the early wear performance of these restorations.

Effect of Li+/Na+ exchange on mechanical behavior and biological activity of lithium disilicate glass-ceramic

Lithium disilicate (LD) glass-ceramics with a stoichiometric composition were ion-exchanged in pure NaNO₃ or mixed NaNO₃ + KNO₃ molten salt baths below the glass transition temperature (T_g). The microstructures, surface morphologies, mechanical properties and bioactivities of the ion-exchanged glass-ceramics were studied in detail. It was found that the strength and toughness of LD glass-ceramic could be enhanced from 175 MPa to 0.96 MPa m^1/2 before ion-exchange to 546 MPa and 4.31 MPa m^1/2 respectively under a lowered ion-exchange temperature because the less stress relaxation. In addition, a gradient of Na⁺ rich layer in the surface of glass-ceramic was induced by Li⁺/Na⁺ exchange, which could be beneficial to the formation of HA (Hydroxyapatite) with nano-size porous after soaking in SBF (Simulated Body Fluid) solution and exhibited better bioactivity compared with the original LD glass-ceramic. The results might provide a reference for the strengthening and biological activation of LD glass-ceramics in bone restoration applications.

Effect of staining on the mechanical, surface and biological properties of lithium disilicate

•

Staining and glazing procedures affects the microbial adherence and surface roughness.

•

Stained and glazed surfaces result in higher wear than polished ceramic surfaces.

•

The stain and glaze layer on the ceramic surface promotes lower strength value.

Purpose

To simulate biodegradation and wear of stained and glazed CAD lithium disilicate ceramic, and evaluate their effects on the microbial adherence and mechanical and surface properties of lithium disilicate ceramic

Materials and methods

160 lithium disilicate ceramic discs were fabricated and divided in eight groups according to manual stain and glaze application with a fine paint brush (without stain and glaze; with stain and glaze) and aging procedures (no aging; wear at 30 N load, 1.7 Hz, 3 × 10⁵ cycles; biodegradation by exposure to microcosm biofilm; biodegradation + wear; biodegradation + wear). Profilometry was performed to determine the surface roughness and the wear consequences. Biaxial flexural strength test was performed, and a Streptococcus mutans adherence test was conducted to evaluate the number of colony forming units.

Results

Unaged samples with and without stain and glaze presented the lowest values of surface roughness (p < 0.001), but after aging (wear, biodegradation, or both), the samples in the stain and glaze groups were rougher than those in the no stain and glaze groups (p < 0.001). The stain and glaze groups showed the highest volume of wear after aging (p = 0.04), and had the lowest flexural strength values (p < 0.01), irrespective of the aging method. The aging method did not affect the flexural strength (p = 0.06). The number of colonies forming units was higher for biodegradation + no stain and glaze, biodegradation + wear + no stain and glaze, no aging + stain and glaze, biodegradation + stain and glaze, and biodegradation + wear + stain and glaze. The lowest values were observed for no aging + no stain and glaze.

Conclusion

The staining and glazing of lithium disilicate increased the surface wear and bacterial adherence, and decreased biaxial flexural strength of the material. When exposed to S. mutans, surface roughness increased, and biodegradation favored bacterial adherence.

A REVIEW OF MECHANICAL BEHAVIOR OF DENTAL CERAMIC RESTORATIONS

Dental ceramics are well known for restoring the function and aesthetic of lost or damaged teeth. Understanding these materials’ mechanical and aesthetic properties can make a suitable choice for those materials. The longevity of dental ceramics depends on several factors, including manufacturing method, clinical process, and the oral cavity’s aqueous environment. Failure mechanisms in restorative ceramics are complex and a combination of several factors. Different microstructures in the crystalline phase will involve the propagation of cracks and eventually the fatigue of ceramic materials. Large grains reduce mechanical performance compared to small grain sizes. Aesthetic materials used for veneering are weaker than the core materials and fail when even subjected to small loads. The soft bonding in the core–veneer interface and possible residual stresses created during the veneering method are drawbacks of these systems. Studies on the mechanical behavior of these materials have grown significantly in recent years and provide helpful information about static and fatigue experimentation and the failure behavior of various materials used in dental crowns.

Optimizing the microstructure of a new machinable bioactive glass-ceramic

OBJECTIVES

This study aimed to optimize the crystallization process and the microstructure of a new bioactive glass-ceramic (GC) previously developed by our research group to obtain machinable glass-ceramics.

METHODS

Differential scanning calorimetry (DSC) analyses were conducted to explore the characteristic temperatures and construct a semi-quantitative nucleation curve. The GC specimens were characterized by X-ray diffraction (XRD) and Rietveld refinement. Their brittleness index (B) and machinability were characterized and compared with IPS e.max-CAD®. Their Young's modulus, fracture toughness, and hardness were assessed.

RESULTS

We found that the maximum crystal nucleation rate temperature of this GC is ~470 °C. Treatments were designed based on the 1st DSC peak onset (570 °C), 1st peak offset (650 °C), and 2nd peak offset (705 °C) crystallization temperatures of lithium metasilicate (LS, LiSi₂O₃) and lithium disilicate (LS2, Li₂Si₂O₅). Rietveld refinement indicated an increase in LS2 and a reduction in LS and amorphous phase for increased temperatures and longer treatment times. Their B values indicate good machinability compared with that of the control group based on statistical analyses. As expected, lower levels of LS2 increase the machinability regardless of the rotation speed adopted, leading to a greater depth of cut and reduced Edge Chipping Damage Depth (ECDD).

CONCLUSION

This bioactive GC with optimized microstructure presents high machinability. For treatment temperatures above 570 °C, the number of elongated LS2 crystals increases and decreases the amorphous phase content, which reduce the machinability of the GC, and should therefore be avoided. The best results were obtained using heat treatment at 570 °C, which produces LS crystals embedded in a glassy matrix (67%) with small contents of secondary phases.

Characterization of Reinforced and Unreinforced Glass-Ceramic Veneers

This study aimed to characterize the surface topography, effect of polishing on surface roughness, residual stresses, and hardness in two glass-ceramic veneers. Fifty-two (52) upper incisors were collected, prepared, and scanned for ceramic veneers. Half of the teeth were restored with veneers made up of feldspathic ceramic (FE), and the other half with zirconia-reinforced lithium silicate ceramic (SZ). All the veneers were designed and milled using a CAD/CAM system and later cemented following the manufacturer's guideline. An optical microscope analyzed the topography of the specimens before and after polishing. The surface roughness was measured using the roughness meter (n=12) and the topographical analysis was carried out using an atomic force microscope (n=6). The residual stresses and Vickers' hardness were evaluated by the indentation method in a micro-hardness indenter (n=6). The surface roughness was analyzed using a three-way analysis of variance (ANOVA) followed by a post hoc Tukey test. The Student t-test was used to compare the residual stresses and hardness between the two ceramics. The topographical analysis revealed that both glass-ceramic veneers had similar percentages of specimens with cracks, before (34.6%) and after (42.3%) polishing. The surface roughness decreased after polishing (p<0.001), and the polishing smoothed out the surface of the veneers. The zirconia-reinforced lithium silicate veneer had a lower roughness as compared to the feldspathic one after polishing, while the residual stresses (p=0.722) and hardness (p=0.782) were statistically similar for both ceramic veneers.

Amorphous-Crystalline Calcium Phosphate Coating Promotes In Vitro Growth of Tumor-Derived Jurkat T Cells Activated by Anti-CD2/CD3/CD28 Antibodies

A modern trend in traumatology, orthopedics, and implantology is the development of materials and coatings with an amorphous-crystalline structure that exhibits excellent biocopatibility. The structure and physico-chemical and biological properties of calcium phosphate (CaP) coatings deposited on Ti plates using the micro-arc oxidation (MAO) method under different voltages (200, 250, and 300 V) were studied. Amorphous, nanocrystalline, and microcrystalline statesof CaHPO4 and β-Ca2P2O7 were observed in the coatings using TEM and XRD. The increase in MAO voltage resulted in augmentation of the surface roughness Ra from 2.5 to 6.5 µm, mass from 10 to 25 mg, thickness from 50 to 105 µm, and Ca/P ratio from 0.3 to 0.6. The electrical potential (EP) of the CaP coatings changed from -456 to -535 mV, while the zeta potential (ZP) decreased from -53 to -40 mV following an increase in the values of the MAO voltage. Numerous correlations of physical and chemical indices of CaP coatings were estimated. A decrease in the ZP magnitudes of CaP coatings deposited at 200-250 V was strongly associated with elevated hTERT expression in tumor-derived Jurkat T cells preliminarily activated with anti-CD2/CD3/CD28 antibodies and then contacted in vitro with CaP-coated samples for 14 days. In turn, in vitro survival of CD4+ subsets was enhanced, with proinflammatory cytokine secretion of activated Jurkat T cells. Thus, the applied MAO voltage allowed the regulation of the physicochemical properties of amorphous-crystalline CaP-coatings on Ti substrates to a certain extent. This method may be used as a technological mechanism to trigger the behavior of cells through contact with micro-arc CaP coatings. The possible role of negative ZP and Ca2+ as effectors of the biological effects of amorphous-crystalline CaP coatings is discussed. Micro-arc CaP coatings should be carefully tested to determine their suitability for use in patients with chronic lymphoid malignancies.

Surface Treatment of the Dental Implant with Hyaluronic Acid: An Overview of Recent Data

Recently, interest has grown by focusing on the evaluation of a molecule already produced in the human body such as hyaluronic acid (HA), as an application to the surface of the titanium implant. Its osteo-conductive characteristics and positive interaction with the progenitor cells responsible for bone formation, consequently, make it responsible for secondary stability. The aim of this work was to analyze the various surface treatments in titanium implants, demonstrating that the topography and surface chemistry of biomaterials can correlate with the host response; also focusing on the addition of HA to the implant surface and assessing the biological implications during early stages of recovery. Used as a coating, HA acts on the migration, adhesion, proliferation and differentiation of cell precursors on titanium implants by improving the connection between implant and bone. Furthermore, the improvement of the bioactivity of the implant surfaces through HA could therefore facilitate the positioning of the dental prosthesis precisely in the early loading phase, thus satisfying the patients’ requests. It is important to note that all the findings should be supported by further experimental studies in animals as well as humans to evaluate and confirm the use of HA in any field of dentistry.

Effects of multiple firing processes on the mechanical properties of lithium disilicate glass-ceramics produced by two different production techniques

STATEMENT OF PROBLEM

Repeated firings cause materials to be exposed to additional heat treatments. The effect of these additional heat treatments on the mechanical properties of lithium disilicate glass-ceramics is not fully known.

PURPOSE

The purpose of this in vitro study was to determine the effects of repeated firing on the mechanical properties of lithium disilicate glass-ceramics produced by 2 different techniques, press and computer-aided design and computer-aided manufacturing (CAD-CAM).

MATERIAL AND METHODS

Eighty rectangular (25×4×2 mm) lithium disilicate glass-ceramic specimens were used in this study, 40 produced by heat pressing and 40 by milling, and divided into 4 groups (n=10) with a different number of veneer porcelain firings (1 to 4). After firing, the Vickers hardness, flexural strength (3-point bend test), and fracture toughness were determined, and the specimens were analyzed with an environmental scanning electron micrograph. Data were analyzed with analysis of variance (ANOVA) (α=.05).

RESULTS

The repeat firing processes did not affect the flexural strength of the specimens in either group (P>.05), while the surface hardness and fracture toughness were significantly changed (P<.05).

CONCLUSIONS

Increasing the number of firings adversely affected the mechanical properties of lithium disilicate glass-ceramics.

Mimicking the electrophysiological microenvironment of bone tissue using electroactive materials to promote its regeneration

The process of bone tissue repair and regeneration is complex and requires a variety of physiological signals, including biochemical, electrical and mechanical signals, which collaborate to ensure functional recovery. The inherent piezoelectric properties of bone tissues can convert mechanical stimulation into electrical effects, which play significant roles in bone maturation, remodeling and reconstruction. Electroactive materials, including conductive materials, piezoelectric materials and electret materials, can simulate the physiological and electrical microenvironment of bone tissue, thereby promoting bone regeneration and reconstruction. In this paper, the structures and performances of different types of electroactive materials and their applications in the field of bone repair and regeneration are reviewed, particularly by providing the results from in vivo evaluations using various animal models. Their advantages and disadvantages as bone repair materials are discussed, and the methods for tuning their performances are also described, with the aim of providing an up-to-date account of the proposed topics.

Morphological Characteristics of the Osteoplastic Potential of Synthetic CaSiO3/HAp Powder Biocomposite

The study describes the influence of synthetic CaSiO₃/HAp powder biocomposite on the process of regeneration in osseous tissue in the alveolar ridges in terms of the morphological characteristics of the osteoplastic potential. The authors investigated the osteoinduction and osteoconduction “in vivo” processes during bone tissue regeneration in the mandible defect area of an experimental animal (rabbit). The possibility of angiogenesis in the graft as an adaptation factor was studied in the process of bone tissue regeneration. The results of the histological study that included the qualitative parameters of bone tissue regeneration, the morphometric parameters (microarchitectonics) of the bone, the parameters of osteosynthesis (thickness of the osteoid plates), and resorption (volume density of the eroded surface) were presented. The results allowed the authors to characterize the possibility of the practical adaptation for synthetic powder biocomposite as an osteoplastic graft for the rehabilitation of osseous defects in dentistry.

Effect of pH Cycling Frequency on Glass-Ceramic Corrosion

The effect of pH changes on the chemical durability of dental glass-ceramic materials was evaluated using weight loss and ion release levels. The hypothesis that increased pH changes will exhibit greater corrosion was investigated. The ion concentration was analyzed using inductively coupled plasma atomic emission spectrometer (ICP). The surface compositions were investigated using X-ray photoelectron spectroscopy (XPS). The surface morphologies were examined using scanning electron microscopy (SEM). Dental glass-ceramics were tested in constant immersion, 3-day cycling, and 1-day cycling with pH 10, pH 2, and pH 7 for 3, 15, and 30 days. The 1-d cycling group demonstrated the highest levels of weight loss compared with 3-d cycling and constant immersion. For the ion release, Si4+ and Ca2+ had the highest rates of release in 1-d cycling, whereas the Al3+ release rate with constant pH 2 was highest. The alteration/passivation layer that was formed on the surface of disks possibly prevented further dissolution of pH 10 corroded disks. XPS analysis demonstrated different surface compositions of corroded disks in pH 10 and pH 2. Si4+, K+, Na+, Al3+, and Ca2+ were detected on the surface of corroded pH 10 disks, whereas a Si4+ and P5+-rich surface formed on corroded pH 2 disks. SEM results demonstrated rougher surfaces for corroded disks in cycling conditions and pH 2 constant immersion. In conclusion, increased pH changes significantly promote the corrosion of dental glass-ceramic materials.

Review of the Modern Dental Ceramic Restorative Materials for Esthetic Dentistry in the Minimally Invasive Age

Material selection is one of the most important decisions to be made by clinicians. Proper material selection can affect the long-term function, longevity, and esthetics of restorations. There are a large number of restorative materials available, which has increased the complexity of the decision-making process. Improper material selection can lead to failures in the outcome. This article is designed to provide the practitioner with up-to-date practical information on ceramic restorative materials and techniques in a clear, evidence-based, and unbiased manner. It also provides decision-making guides to help the practitioner determine the best ceramic material for various clinical scenarios.

Synthesis of bioactive glass-based coating by plasma electrolytic oxidation: Untangling a new deposition pathway toward titanium implant surfaces

HYPOTHESIS

Although bioactive glass (BG) particle coatings were previously developed by different methods, poor particle adhesion to surfaces and reduced biological effects because of glass crystallization have limited their biomedical applications. To overcome this problem, we have untangled, for the first time, plasma electrolytic oxidation (PEO) as a new pathway for the synthesis of bioactive glass-based coating (PEO-BG) on titanium (Ti) materials.

EXPERIMENTS

Electrolyte solution with bioactive elements (Na₂SiO₃-5H₂O, C₄H₆O₄Ca, NaNO₃, and C₃H₇Na₂O₆P) was used as a precursor source to obtain a 45S5 bioglass-like composition on a Ti surface by PEO. Subsequently, the PEO-BG coating was investigated with respect to its surface, mechanical, tribological, electrochemical, microbiological, and biological properties, compared with those of machined and sandblasted/acid-etched control surfaces.

FINDINGS

PEO treatment produced a coating with complex surface topography, Ti crystalline phases, superhydrophilic status, chemical composition, and oxide layer similar to that of 45S5-BG (~45.0Si, 24.5 Ca, 24.5Na, 6.0P w/v%). PEO-BG enhanced Ti mechanical and tribological properties with higher corrosion resistance. Furthermore, PEO-BG had a positive influence in polymicrobial biofilms, by reducing pathogenic bacterial associated with biofilm-related infections. PEO-BG also showed higher adsorption of blood plasma proteins without cytotoxic effects on human cells, and thus may be considered a promising biocompatible approach for biomedical implants.

Glass-Ceramics in Dentistry: A Review

In this review, we first briefly introduce the general knowledge of glass–ceramics, including the discovery and development, the application, the microstructure, and the manufacturing of glass–ceramics. Second, the review presents a detailed description of glass–ceramics in dentistry. In this part, the history, property requirements, and manufacturing techniques of dental glass–ceramics are reviewed. The review provided a brief description of the most prevalent clinically used examples of dental glass–ceramics, namely, mica, leucite, and lithium disilicate glass–ceramics. In addition, we also introduce the newly developed ZrO₂–SiO₂ nanocrystalline glass–ceramics that show great potential as a new generation of dental glass–ceramics. Traditional strengthening mechanisms of glass–ceramics, including interlocking, ZrO₂–reinforced, and thermal residual stress effects, are discussed. Finally, a perspective and outlook for future directions in developing new dental glass–ceramics is provided to offer inspiration to the dental materials community.

Multiple and Promising Applications of Strontium (Sr)-Containing Bioactive Glasses in Bone Tissue Engineering

Improving and accelerating bone repair still are partially unmet needs in bone regenerative therapies. In this regard, strontium (Sr)-containing bioactive glasses (BGs) are highly-promising materials to tackle this challenge. The positive impacts of Sr on the osteogenesis makes it routinely used in the form of strontium ranelate (SR) in the clinical setting, especially for patients suffering from osteoporosis. Therefore, a large number of silicate-, borate-, and phosphate-based BGs doped with Sr and produced in different shapes have been developed and characterized, in order to be used in the most advanced therapeutic strategies designed for the management of bone defects and injuries. Although the influence of Sr incorporation in the glass is debated regarding the obtained physicochemical and mechanical properties, the biological improvements have been found to be substantial both in vitro and in vivo. In the present study, we provide a comprehensive overview of Sr-containing glasses along with the current state of their clinical use. For this purpose, different types of Sr-doped BG systems are described, including composites, coatings and porous scaffolds, and their applications are discussed in the light of existing experimental data along with the significant challenges ahead.