Loading of Hip Measured by Hip Contact Forces at Different Speeds of Walking and Running

Biomechanical validation of a tibial critical-size defect model in minipigs

BACKGROUND

Autologous cancellous bone grafting still represents the gold standard for the therapy of non-healing bone defects. However, donor site morbidity and the restricted availability of autologous bone grafts have initiated scientists to look for promising alternatives to heal even large defects. The present study aimed to evaluate the biomechanical potential and failure properties of a previously developed metaphyseal critical-size defect model of the proximal tibia in minipigs for future comparisons of bone substitute materials.

METHODS

Fresh-frozen minipig tibiae were divided into two groups, with half undergoing the creation of critical-size defects. Specimens were subjected to biomechanical fatigue tests and load-to-failure tests. CT scans post-test verified bone damage. Statistical analysis compared the properties of defected and intact specimens.

FINDINGS

In this model, it was demonstrated that under uniaxial cyclic compression within the loading axis, the intact tibiae specimens (8708 ± 202 N) provided a significant (p = 0.014) higher compressive force to failure than the tibiae with the defect (6566 ± 1653 N).

INTERPRETATION

Thus, the used minipig model is suitable for comparing bone substitute materials regarding their biomechanical forces and bone regeneration capacity.

Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios

Total hip arthroplasty (THA) is one of the most successful orthopaedic interventions globally, with over 450,000 procedures annually in the U.S. alone. However, issues like aseptic loosening, dislocation, infection and stress shielding persist, necessitating complex, costly revision surgeries. This highlights the need for continued biomaterials innovation to enhance primary implant integrity and longevity. Implant materials play a pivotal role in determining long-term outcomes, with titanium alloys being the prominent choice. However, emerging evidence indicates scope for optimized materials. The nickel-free β titanium alloy Ti-27Nb shows promise with excellent biocompatibility and mechanical properties. Using finite element analysis (FEA), this study investigated the biomechanical performance and safety factors of a hip bone implant made of nickel-free titanium alloy (Ti-27Nb) under actual loading during routine day life activities for different body weights. The FEA modelled physiological loads during walking, jogging, stair ascent/descent, knee bend, standing up, sitting down and cycling for 75 kg and 100 kg body weights. Comparative analyses were conducted between untreated versus 816-hour simulated body fluid (SBF) treated implant conditions to determine in vivo degradation effects. The FEA predicted elevated von Mises stresses in the implant neck for all activities, especially stair climbing, due to its smaller cross-section. Stresses increased substantially with a higher 100 kg body weight compared to 75 kg, implying risks for heavier patients. Safety factors were reduced by up to 58% between body weights, although remaining above the desired minimum value of 1. Negligible variations were observed between untreated and SBF-treated responses, attributed to Ti-27Nb's excellent biocorrosion resistance. This comprehensive FEA provided clinically relevant insights into the biomechanical behaviour and integrity of the Ti-27Nb hip implant under complex loading scenarios. The results can guide shape and material optimization to improve robustness against repetitive stresses over long-term use. Identifying damage accumulation and failure risks is crucial for hip implants encountering real-world variable conditions. The negligible SBF effects validate Ti-27Nb's resistance to physiological degradation. Overall, the study significantly advances understanding of Ti-27Nb's suitability for reliable, durable hip arthroplasties with low revision rates.

Influence of Walking Over Unexpected Uneven Terrain on Joint Loading for Individuals With Transtibial Amputation

Individuals with transtibial amputation (TTA) experience asymmetric lower-limb loading which can lead to joint pain and injuries. However, it is unclear how walking over unexpected uneven terrain affects their loading patterns. This study sought to use modeling and simulation to determine how peak joint contact forces and impulses change for individuals with unilateral TTA during an uneven step and subsequent recovery step and how those patterns compare to able-bodied individuals. We expected residual limb loading during the uneven step and intact limb loading during the recovery step would increase relative to flush walking. Further, individuals with TTA would experience larger loading increases compared to able-bodied individuals. Simulations of individuals with TTA showed during the uneven step, changes in joint loading occurred at all joints except the prosthetic ankle relative to flush walking. During the recovery step, intact limb joint loading increased in early stance relative to flush walking. Simulations of able-bodied individuals showed large increases in ankle joint loading for both surface conditions. Overall, increases in early stance knee joint loading were larger for those with TTA compared to able-bodied individuals during both steps. These results suggest that individuals with TTA experience altered joint loading patterns when stepping on uneven terrain. Future work should investigate whether an adapting ankle-foot prosthesis can mitigate these changes to reduce injury risk.

Association between hip muscle strength/function and hip cartilage defects in sub-elite football players with hip/groin pain

OBJECTIVE

To explore associations between hip muscle strength and cartilage defects (presence and severity) on magnetic resonance imaging (MRI) in young adults with hip/groin pain participating in sub-elite football.

DESIGN

Sub-elite football players with hip/groin pain (>6 months) completed assessments of isometric hip strength and functional task performance. Hip cartilage defects were assessed using the Scoring Hip Osteoarthritis with MRI tool. This exploratory, cross-sectional study used logistic and negative binomial models to assess the relationships between hip muscle strength or functional task performance and hip cartilage defects, controlling for body mass index, age, testing site and cam morphology, incorporating sex-specific interaction terms.

RESULTS

One hundred and eighty-two (37 women) sub-elite (soccer or Australian football) players with hip/groin pain (age 26 ± 7 years) were included. Greater hip extension strength was associated with higher cartilage total score (adjusted incidence rate ratio [aIRR] 1.01, 95%CI: 1.0 to 1.02, p = 0.013) and superolateral cartilage score (adjusted odds ratio (aOR) 1.03, 95% confidence interval (CI): 1.01 to 1.06, p < 0.01). In female sub-elite football players, greater hip external rotation strength was associated with lateral cartilage defects (aOR 1.61, 95%CI: 1.05 to 2.48, p = 0.03) and higher cartilage total score (aIRR 1.25, 95%CI: 1.01 to 1.66, p = 0.042). A one-repetition increase in one-leg rise performance was related to lower odds of superomedial cartilage defects (aOR 0.96, 95%CI: 0.94 to 0.99, p < 0.01).

CONCLUSIONS

Overall, there were few associations between peak isometric hip muscle strength and overall hip cartilage defects. It is possible that other factors may have relevance in sub-elite football players. Additional studies are needed to support or refute our findings that higher one leg rise performance was associated with reduced superomedial cartilage defect severity and greater hip extension strength was related to higher cartilage defect severity scores.

Hip biomechanics in early recovery following fixation of intertrochanteric fractures: Results from a randomised controlled trial

Single and dual integrated screw femoral nails are both commonly used to treat intertrochanteric fractures. This study investigated if using single or dual integrated screw femoral nails result in different post-operative hip joint loading. In the presence of differences, we investigated potential contributing factors. Patients were randomised for treatment via single screw (Stryker, Gamma3) or dual-integrated screw nail (Smith and Nephew, Intertan). Pre-injury mobility levels were collected at enrolment. Hip radiographs and gait data were collected at six weeks (Gamma: 16; Intertan: 15) and six months (Gamma: 14; Intertan: 13) follow-up. The resultant hip joint reaction forces and abductor muscle forces were estimated using electromyography-assisted neuromusculoskeletal modelling during level walking gait. Our primary analysis focused on the resultant hip joint reaction force and abductor muscle forces. We compared between groups, across stance phase of walking gait, using statistical parametric mapping. At six weeks, the Intertan group showed a short (∼5% of stance phase) but substantial (33 % [0.3 × body weight] greater magnitude) resultant hip joint reaction force when compared to the Gamma group (P = 0.022). Higher gluteus medius forces (P = 0.009) were demonstrated in the Intertan group at six weeks. Harris Hip Scores followed the trend seen for the biomechanical outcomes with superior scores for the Intertan group at six weeks postoperative (P = 0.044). The use of dual-integrated screw femoral nails over single screw devices may allow for hip biomechanics more closely resembling normal hip function at earlier post-operative timepoints, but these appear to resolve by six months postoperative.

Multiscale topology optimization of pelvic bone for combined walking and running gait cycles

We propose a multiscale topology optimization procedure of pelvic bone using weighted compliance minimization. In macroscale optimization, a level set-based method is used, which gives a binary structure. In microscale optimization, cubic lattice-based homogenization is done while keeping the global geometry fixed. For the macroscale, a volume constraint equal to the volume of the pelvic bone is imposed, whereas, for the microscale, a mass constraint equal to the mass of the pelvic bone is imposed. The optimal geometries are compared with pelvic bone using different metrics and show good similarity with the same. Designed geometries are additively manufactured and experimentally tested for stiffness.

Hip Contact Forces During Sprinting in Femoroacetabular Impingement Syndrome

PURPOSE

Sprinting often provokes hip pain in individuals with femoroacetabular impingement syndrome (FAIS). Asphericity of the femoral head-neck junction (cam morphology) characteristic of FAIS can increase the risk of anterior-superior acetabular cartilage damage. This study aimed to 1) compare hip contact forces (magnitude and direction) during sprinting between individuals with FAIS, asymptomatic cam morphology (CAM), and controls without cam morphology, and 2) identify the phases of sprinting with high levels of anteriorly directed hip contact forces.

METHODS

Forty-six recreationally active individuals with comparable levels of physical activity were divided into three groups (FAIS, 14; CAM, 15; control, 17) based on their history of hip/groin pain, results of clinical impingement tests, and presence of cam morphology (alpha angle >55°). Three-dimensional marker trajectories, ground reaction forces, and electromyograms from 12 lower-limb muscles were recorded during 10-m overground sprinting trials. A linearly scaled electromyogram-informed neuromusculoskeletal model was used to calculate hip contact force magnitude (resultant, anterior-posterior, inferior-superior, medio-lateral) and angle (sagittal and frontal planes). Between-group comparisons were made using two-sample t -tests via statistical parametric mapping ( P < 0.05).

RESULTS

No significant differences in magnitude or direction of hip contact forces were observed between FAIS and CAM or between FAIS and control groups during any phase of the sprint cycle. The highest anteriorly directed hip contact forces were observed during the initial swing phase of the sprint cycle.

CONCLUSIONS

Hip contact forces during sprinting do not differentiate recreationally active individuals with FAIS from asymptomatic individuals with and without cam morphology. Hip loading during early swing, where peak anterior loading occurs, may be a potential mechanism for cartilage damage during sprinting-related sports in individuals with FAIS and/or asymptomatic cam morphology.

A framework based on subject-specific musculoskeletal models and Monte Carlo simulations to personalize muscle coordination retraining

Excessive loads at lower limb joints can lead to pain and degenerative diseases. Altering joint loads with muscle coordination retraining might help to treat or prevent clinical symptoms in a non-invasive way. Knowing how much muscle coordination retraining can reduce joint loads and which muscles have the biggest impact on joint loads is crucial for personalized gait retraining. We introduced a simulation framework to quantify the potential of muscle coordination retraining to reduce joint loads for an individuum. Furthermore, the proposed framework enables to pinpoint muscles, which alterations have the highest likelihood to reduce joint loads. Simulations were performed based on three-dimensional motion capture data of five healthy adolescents (femoral torsion 10°-29°, tibial torsion 19°-38°) and five patients with idiopathic torsional deformities at the femur and/or tibia (femoral torsion 18°-52°, tibial torsion 3°-50°). For each participant, a musculoskeletal model was modified to match the femoral and tibial geometry obtained from magnetic resonance images. Each participant's model and the corresponding motion capture data were used as input for a Monte Carlo analysis to investigate how different muscle coordination strategies influence joint loads. OpenSim was used to run 10,000 simulations for each participant. Root-mean-square of muscle forces and peak joint contact forces were compared between simulations. Depending on the participant, altering muscle coordination led to a maximum reduction in hip, knee, patellofemoral and ankle joint loads between 5 and 18%, 4% and 45%, 16% and 36%, and 2% and 6%, respectively. In some but not all participants reducing joint loads at one joint increased joint loads at other joints. The required alteration in muscle forces to achieve a reduction in joint loads showed a large variability between participants. The potential of muscle coordination retraining to reduce joint loads depends on the person's musculoskeletal geometry and gait pattern and therefore showed a large variability between participants, which highlights the usefulness and importance of the proposed framework to personalize gait retraining.

Hip joint and muscle loading for persons with bilateral transfemoral/through-knee amputations: biomechanical differences between full-length articulated and foreshortened non-articulated prostheses

BACKGROUND

Currently, there is little available in-depth analysis of the biomechanical effect of different prostheses on the musculoskeletal system function and residual limb internal loading for persons with bilateral transfemoral/through-knee amputations (BTF). Commercially available prostheses for BTF include full-length articulated prostheses (microprocessor-controlled prosthetic knees with dynamic response prosthetic feet) and foreshortened non-articulated stubby prostheses. This study aims to assess and compare the BTF musculoskeletal function and loading during gait with these two types of prostheses.

METHODS

Gait data were collected from four male traumatic military BTF and four able-bodied (AB) matched controls using a 10-camera motion capture system with two force plates. BTF completed level-ground walking trials with full-length articulated and foreshortened non-articulated stubby prostheses. Inverse kinematics, inverse dynamics and musculoskeletal modelling simulations were conducted.

RESULTS

Full-length articulated prostheses introduced larger stride length (by 0.5 m) and walking speed (by 0.3 m/s) than stubbies. BTF with articulated prostheses showed larger peak hip extension angles (by 10.1°), flexion moment (by 1.0 Nm/kg) and second peak hip contact force (by 3.8 bodyweight) than stubbies. There was no difference in the hip joint loading profile between BTF with stubbies and AB for one gait cycle. Full-length articulated prostheses introduced higher hip flexor muscle force impulse than stubbies.

CONCLUSIONS

Compared to stubbies, BTF with full-length articulated prostheses can achieve similar activity levels to persons without limb loss, but this may introduce detrimental muscle and hip joint loading, which may lead to reduced muscular endurance and joint degeneration. This study provides beneficial guidance in making informed decisions for prosthesis choice.

Fatigue behaviour of load-bearing polymeric bone scaffolds: A review

Bone scaffolds play a crucial role in bone tissue engineering by providing mechanical support for the growth of new tissue while enduring static and fatigue loads. Although polymers possess favourable characteristics such as adjustable degradation rate, tissue-compatible stiffness, ease of fabrication, and low toxicity, their relatively low mechanical strength has limited their use in load-bearing applications. While numerous studies have focused on assessing the static strength of polymeric scaffolds, little research has been conducted on their fatigue properties. The current review presents a comprehensive study on the fatigue behaviour of polymeric bone scaffolds. The fatigue failure in polymeric scaffolds is discussed and the impact of material properties, topological features, loading conditions, and environmental factors are also examined. The present review also provides insight into the fatigue damage evolution within polymeric scaffolds, drawing comparisons to the behaviour observed in natural bone. Additionally, the effect of polymer microstructure, incorporating reinforcing materials, the introduction of topological features, and hydrodynamic/corrosive impact of body fluids in the fatigue life of scaffolds are discussed. Understanding these parameters is crucial for enhancing the fatigue resistance of polymeric scaffolds and holds promise for expanding their application in clinical settings as structural biomaterials. STATEMENT OF SIGNIFICANCE: Polymers have promising advantages for bone tissue engineering, including adjustable degradation rates, compatibility with native bone stiffness, ease of fabrication, and low toxicity. However, their limited mechanical strength has hindered their use in load-bearing scaffolds for clinical applications. While prior studies have addressed static behaviour of polymeric scaffolds, a comprehensive review of their fatigue performance is lacking. This review explores this gap, addressing fatigue characteristics, failure mechanisms, and the influence of parameters like material properties, topological features, loading conditions, and environmental factors. It also examines microstructure, reinforcement materials, pore architectures, body fluids, and tissue ingrowth effects on fatigue behaviour. A significant emphasis is placed on understanding fatigue damage progression in polymeric scaffolds, comparing it to natural bone behaviour.

Comparison between osteonecrosis of the humeral and femoral heads - epidemiological analysis of the surgical trend using the nationwide claims database of the republic of Korea

BACKGROUNDS

The humeral head is the second most common site of osteonecrosis, after the femoral head. However, compared to osteonecrosis of the femoral head (ONFH), epidemiological information on osteonecrosis of the humeral head (ONHH) is scarce. We hypothesised that different biomechanical properties of the shoulder from the hip joint might present different epidemiological characteristics of ONHH from those of the ONFH. To evaluate epidemiological differences, we compared trends in the surgical treatment of ONHH and ONFH using the nationwide medical claims database of the Republic of Korea (ROK).

METHODS

We analysed epidemiological data from the Health Insurance Review and Assessment (HIRA) database of the ROK between 2008 and 2018. HIRA database contains almost all medical information in an anonymised form, including demographics, diagnoses, and types of surgical procedures, generated through healthcare practices in ROK. The annual incidence rates of ONHH and ONFH were calculated based on the total number of the general population. Demographics, annual incidence, and the proportion of post-traumatic osteonecrosis and surgical procedures were compared according to the anatomical site and the affected year.

RESULTS

The total number of patients treated for ONHH and ONFH during the study period was 1,028 and 66,260, respectively. Although the incidence of ONHH increased, it is a relatively rare disease compared to ONFH. ONHH occurred more frequently in females, while ONFH occurred predominantly in male patients (p < 0.001). Surgical treatment for ONHH was most frequently performed in older patients (63.7%), whereas middle-aged patients had the largest proportion of ONFH (48.9%, p < 0.001). The proportion of post-traumatic osteonecrosis was significantly higher in the ONHH (5.1%) than in the ONFH (1.9%, p < 0.001). Arthroplasty was performed more frequently in the ONHH (96.0%) than in the ONFH (92.9%, p < 0.001).

CONCLUSION

Despite the anatomical similarities between the hip and shoulder joints, the different biomechanical properties, such as weight-bearing functions, might cause epidemiological differences between ONHH and ONFH.

Influence of femoral anteversion angle and neck-shaft angle on muscle forces and joint loading during walking

Femoral deformities, e.g. increased or decreased femoral anteversion (AVA) and neck-shaft angle (NSA), can lead to pathological gait patterns, altered joint loads, and degenerative joint diseases. The mechanism how femoral geometry influences muscle forces and joint load during walking is still not fully understood. The objective of our study was to investigate the influence of femoral AVA and NSA on muscle forces and joint loads during walking. We conducted a comprehensive musculoskeletal modelling study based on three-dimensional motion capture data of a healthy person with a typical gait pattern. We created 25 musculoskeletal models with a variety of NSA (93°-153°) and AVA (-12°-48°). For each model we calculated moment arms, muscle forces, muscle moments, co-contraction indices and joint loads using OpenSim. Multiple regression analyses were used to predict muscle activations, muscle moments, co-contraction indices, and joint contact forces based on the femoral geometry. We found a significant increase in co-contraction of hip and knee joint spanning muscles in models with increasing AVA and NSA, which led to a substantial increase in hip and knee joint contact forces. Decreased AVA and NSA had a minor impact on muscle and joint contact forces. Large AVA lead to increases in both knee and hip contact forces. Large NSA (153°) combined with large AVA (48°) led to increases in hip joint contact forces by five times body weight. Low NSA (108° and 93°) combined with large AVA (48°) led to two-fold increases in the second peak of the knee contact forces. Increased joint contact forces in models with increased AVA and NSA were linked to changes in hip muscle moment arms and compensatory increases in hip and knee muscle forces. Knowing the influence of femoral geometry on muscle forces and joint loads can help clinicians to improve treatment strategies in patients with femoral deformities.

Validation of a musculoskeletal model to investigate hip joint mechanics in response to dynamic multiplanar tasks

Existing hip-focused musculoskeletal (MSK) models are limited by the hip range of motion, hip musculature detail, or have only been qualitatively validated. The purposes of this study were to: i) modify the existing 2396Hip MSK model to simulate dynamic tasks with multiplanar hip joint motion; and ii) validate the modified MSK model quantitatively against experimental data. Experimental data was collected from five healthy adults (age = 25 [6] years, two females) during eight movement tasks. The motion and ground reaction force data were input into the MSK modeling software OpenSim to calculate muscle activations and hip contact forces (HCFs). The HCFs were compared to experimental HCFs previously measured in total hip arthroplasty (THA) patients using instrumented hip prostheses. A gait simulation was performed using data from one THA patient to directly assess the model's accuracy in estimating HCFs. The young adults' modeled and experimental muscle activations for seven muscles were compared using a cross-correlation function. The model only overestimated the peak resultant HCFs by 0.06-0.08 N/BW compared to the experimentally measured HCFs of the THA patient. The young adults' HCFs were over two standard deviations higher than previously measured in the THA patients, which is likely a result of different movement patterns. The correlation coefficients indicated strong correlations between experimental and modeled muscle activations in 50 of the 56 comparisons. The results of this study suggest the new MSK model is an appropriate method to quantify HCFs and muscle activations in response to dynamic, multiplanar tasks among young, healthy adults.

Estimation of two wear factors for total hip arthroplasty: A simulation study based on musculoskeletal modelling

BACKGROUND

Primary causes of surgical revision after total hip arthroplasty are polyethylene wear and implant loosening. These factors are particularly related to joint friction and thus patients' physical activity. Assessing implant wear over time according to patients' morphology and physical activity level is key to improve follow-up and patients' quality of life.

METHODS

An approach initially proposed for tibiofemoral prosthetic wear estimation was adapted to compute two wear factors (force-velocity, directional wear intensity) using a musculoskeletal model. It was applied on 17 participants with total hip arthroplasty to compute joint angular velocity, contact force, sliding velocity, and wear factors during common daily living activities.

FINDINGS

Differences were observed between gait, sitting down, and standing up tasks. An incremental increase of both global wear factors (time-integral) was observed during gait from slow to fast speeds (p ≤ 0.01). Interestingly, these two wear factors did not result in same trend for sitting down and standing up tasks. Compared to gait, one cycle of sitting down or standing up tends to induce higher friction-related wear but lower cross-shear-related wear. Depending on the wear factor, significant differences can be found between sitting down and gait at slow speed (p ≤ 0.05), and between sitting down (p ≤ 0.05) or standing up (p ≤ 0.05) and gait at fast speed. Furthermore, depending on the activity, wear can be fostered by joint contact force and/or sliding velocity.

INTERPRETATION

This study demonstrated the potential of wear estimation to highlight activities inducing a higher risk of implant wear after total hip arthroplasty from motion capture data.

Reverse dynamics analysis of contact force and muscle activities during the golf swing after total hip arthroplasty

There are no reports on hip kinetics including contact forces and muscle activities during the golf swing after total hip arthroplasty (THA). The aim of this study was to identify the characteristics of three-dimensional dynamics during the golf swing. Ten unilateral primary THA patients participated in motion capture test of their driver golf swing. The driver swing produced approximately 20-30° of rotation in both lead and trail replaced hips. The mean hip contact forces (HCFs) of lead and trail replaced hips were 5.1 and 6.6 × body weight, respectively. Left and right THAs showed similar HCFs of lead and trail hips. More than 60% of the Percent maximum voluntary isometric contraction was found in bilateral iliopsoas muscles in all unilateral THA. Three factors [female sex, lower modified Harris Hip Score, and higher HCF of surgical side] were associated with the golf-related replacement hip pain. Golf is an admissible sport after THA because driver swings do not contribute excessive rotation or contact forces to hip prostheses. HCF could be reduced through swing adjustments, which may allow patients with golf-related replacement hip pain to develop a comfortable golf game free from pain.

Criteria-Based Rehabilitation Following Revision Hip Arthroscopy: A Clinical Commentary

Hip revision arthroscopy is becoming an increasingly popular surgery for those with unsatisfactory outcomes following primary hip arthroscopy. With the relatively uncommon but potentially increased difficulty of rehabilitation from this surgery, a lack of established research regarding rehabilitative programs remains. Therefore, the purpose of this clinical commentary is to propose a criterion-based progression that considers the intricacies present following a hip revision arthroscopy from early rehabilitation through return to sport. Criteria are presented clearly to promote objective progression through rehabilitation as opposed to relying on time since surgery as revision surgeries do not always follow traditional tissue healing time-frames. This criterion based progression promotes range of motion (ROM), strength, gait, neuromuscular control, load introduction and gradual return to play.

Level of Evidence

5.

The Immediate Effect of Backward Walking on External Knee Adduction Moment in Healthy Individuals

Backward walking (BW) has been recommended as a rehabilitation intervention to prevent, manage, or improve diseases. However, previous studies showed that BW significantly increased the first vertical ground reaction force (GRF) during gait, which might lead to higher loading at the knee. Published reports have not examined the effects of BW on medial compartment knee loading. The objective of this study was to investigate the effects of BW on external knee adduction moment (EKAM). Twenty-seven healthy adults participated in the present study. A sixteen-camera three-dimensional VICON gait analysis system, with two force platforms, was used to collect the EKAM, KAAI, and other biomechanical data during BW and forward walking (FW). The first (P < 0.001) and second (P < 0.001) EKAM peaks and KAAI (P =0.02) were significantly decreased during BW when compared with FW. The BW significantly decreased the lever arm length at the first EKAM peak (P =0.02) when compared with FW. In conclusion, BW was found to be a useful strategy for reducing the medial compartment knee loading even though the first peak ground reaction force was significantly increased.

Effect of fall direction on the lower hip fracture risk in athletes with different loading histories: A finite element modeling study in multiple sideways fall configurations

Physical loading makes bones stronger through structural adaptation. Finding effective modes of exercise to improve proximal femur strength has the potential to decrease hip fracture risk. Previous proximal femur finite element (FE) modeling studies have indicated that the loading history comprising impact exercises is associated with substantially higher fracture load. However, those results were limited only to one specified fall direction. It remains thus unclear whether exercise-induced higher fracture load depends on the fall direction. To address this, using magnetic resonance images of proximal femora from 91 female athletes (mean age 24.7 years with >8 years competitive career) and their 20 non-athletic but physically active controls (mean age 23.7 years), proximal femur FE models were created in 12 different sideways fall configurations. The athletes were divided into five groups by typical loading patterns of their sports: high-impact (H-I: 9 triple- and 10 high-jumpers), odd-impact (O-I: 9 soccer and 10 squash players), high-magnitude (H-M: 17 powerlifters), repetitive-impact (R-I: 18 endurance runners), and repetitive non-impact (R-NI: 18 swimmers). Compared to the controls, the FE models showed that the H-I and R-I groups had significantly (p < 0.05) higher fracture loads, 11-17% and 22-28% respectively, in all fall directions while the O-I group had significantly 10-11% higher fracture loads in four fall directions. The H-M and R-NI groups did not show significant benefit in any direction. Also, the analyses of the minimum fall strength (MFS) among these multiple fall configurations confirmed significantly 15%, 11%, and 14% higher MFSs in these impact groups, respectively, compared to the controls. These results suggest that the lower hip fracture risk indicated by higher fracture loads in athletes engaged in high impact or repetitive impact sports is independent of fall direction whereas the lower fracture risk attributed to odd-impact exercise is more modest and specific to the fall direction. Moreover, in concordance with the literature, the present study also confirmed that the fracture risk increases if the impact is imposed on the more posterolateral aspect of the hip. The present results highlight the importance of engaging in the impact exercises to prevent hip fractures and call for retrospective studies to investigate whether specific impact exercise history in adolescence and young adulthood is also associated with lower incidence of hip fractures in later life.

Relationship between hip muscle strength and hip biomechanics during running in people with femoroacetabular impingement syndrome

BACKGROUND

Hip muscle weakness and altered hip biomechanics during walking are often observed in people with femoroacetabular impingement syndrome, although little is known about biomechanics during higher impact tasks. The aim of our study was to explore relationships between hip muscle strength and hip biomechanics during running in people with femoroacetabular impingement syndrome, including exploring sex as an effect-modifier of this relationship.

METHODS

Forty-two adults with unilateral femoroacetabular impingement syndrome (20 females; age 18-50 years; alpha angle ≥60°) completed assessments of hip muscle strength and hip biomechanics during running. Strength was assessed using a hand-held dynamometer for the hip flexors, extensors, abductors, adductors, internal rotators, and external rotators. Hip biomechanics were assessed during overground running (3-3.5 m/s) using three-dimensional motion capture and a force plate. Linear models assessed the relationships between hip strength and hip biomechanics of the symptomatic limb, controlling for body mass and running velocity along with an interaction term (strength*sex).

FINDINGS

A significant negative relationship was observed between hip external rotator strength and hip frontal plane range of motion (i.e., excursion), independent of sex (estimate = -0.039, 95%CI -0.071 to -0.008, P = 0.02). Four sex-specific interactions were observed, with a significant positive relationship between hip external rotator strength and peak hip extension moment in women (estimate = -0.413, 95%CI -0.713 to -0.114, P = 0.01) but not in men.

INTERPRETATION

We found significant relationships between hip external rotator strength and stance phase running biomechanics, providing further understanding on two impaired physical measures that may inform exercise-based management strategies in femoroacetabular impingement syndrome.

The effects of sex and landing task on hip mechanics

Prevalence of femoroacetabular impingement syndrome is common in cutting sports. A first step to understanding the relationship between cutting sports and the development of femoroacetabular impingement is to investigate hip joint contact forces during such tasks. The purpose of this study was to explore sex and task differences in hip joint contact forces, estimated through musculoskeletal modeling, during single-leg drop landings and land-and-cuts. Kinematics and ground reaction forces were obtained from 38 adults performing drop landings and land-and-cut tasks. Simulations were performed in OpenSim to estimate lower extremity muscle forces and hip joint contact forces. Statistical parametric mapping was used to compare hip joint force waveforms between sex and task. There were no sex differences in hip joint forces, but landing trials were characterized by increased hip joint forces compared to land-and-cut trials. The hip joint force estimates obtained the current study could be used in future finite element models that incorporate bone growth models to understand the development of femoroacetabular impingement and design possible compensatory exercises.

In vivo analysis of hip joint loading on Nordic walking novices

Objective

To evaluate the influence of Nordic walking (NW) on hip joint loads in order to determine whether it can be safely performed during postoperative physiotherapy in patients after orthopeadic surgery of the hip.

Methods

Internal hip joint loads were directly measured in vivo in 6 patients using instrumented hip prostheses during NW and ordinary walking (OW). All patients received training in two different NW techniques (double-poling and the diagonal technique) by a certified NW instructor. Measurements were conducted on a treadmill at a speed of 4 km/h on level ground, at 10% inclination and at 10% slope as well as on a level lawn at a self chosen comfortable speed. Resultant contact force (F_res), bending moment (M_bend) and torsional torque (M_tors) were compared between NW and OW as well as between both NW techniques.

Results

Joint loads showed a double peak pattern during all setups. Neither NW technique significantly influenced hip joint loads at the time of the first load peak during contralateral toe-off (CTO), which was also the absolute load peak, in comparison to OW. Compared to OW, double-poling significantly reduced F_res and M_bend at the time of the second load peak during the contralateral heel strike (CHS) on level ground both on the treadmill (− 6% and − 7%, respectively) and on the lawn (− 7% and − 9%). At 10% inclination, the diagonal technique increased F_res and M_bend at CHS (by + 6% and + 7%), but did not increase the absolute load peak at CTO.

Conclusion

Joint loads during NW are comparable to those of OW. Therefore, NW can be considered a low-impact activity and seems to be safe for patients that are allowed full weight bearing, e.g. during postoperative rehabilitation after THA.

Effect of different walking speeds on joint and muscle force estimation using AnyBody and OpenSim

BACKGROUND

To be able to use muscluloskeletal models in clinical settings, it is important to understand the effect of walking speed on joint and muscle force estimations in different generic musculoskeletal models.

RESEARCH QUESTION

The aim of the current study is to compare estimated joint and muscle forces as a function of walking speed between two standard approaches offered in two different modelling environments (AnyBody and OpenSim).

METHODS

Experimental data of 10 healthy participants were recorded at three different walking speeds (self-selected, 25 % slower, 25 % faster) using a ten-camera motion capture system together with four force plates embedded into a ten-meter walkway. Joint compression forces and muscle forces were calculated with a generic model in AnyBody and OpenSim. Trend analyses, mean absolute error (MAE) and correlation coefficients were used to compare joint compression forces and muscle forces between the two approaches. A one-way and two-way ANOVA with repeated measures were used to compare MAE and trend analysis changes, respectively (α = 0.05, Bonferroni corrected post-hoc tests).

RESULTS

Trend analyses showed the same speed effect for AnyBody and OpenSim. MAEs increased significantly from slow to fast walking for knee joint compression forces, biceps femoris long head, gluteus maximus, gluteus medius and vastus intermedius. Lower correlation coefficients during slower walking were found for quadriceps muscles, gluteus maximus and biceps femoris compared to normal and faster walking.

SIGNIFICANCE

Lower correlation coefficients during slower walking are assumed to be due to a higher amount of solutions solving the muscle recruitment in musculoskeletal models. This indicates that decreasing walking speed is more prone to speed dependent differences regarding variability, while the absolute error increased with increasing walking speed. To conclude, different modelling environments can react differently to changes in walking speed, but overall results are promising regarding the generalization across different generic musculoskeletal models.

Quantifying Muscle Forces and Joint Loading During Hip Exercises Performed With and Without an Elastic Resistance Band

An increase in hip joint contact forces (HJCFs) is one of the main contributing mechanical causes of hip joint pathologies, such as hip osteoarthritis, and its progression. The strengthening of the surrounding muscles of the joint is a way to increase joint stability, which results in the reduction of HJCF. Most of the exercise recommendations are based on expert opinions instead of evidence-based facts. This study aimed to quantify muscle forces and joint loading during rehabilitative exercises using an elastic resistance band (ERB). Hip exercise movements of 16 healthy volunteers were recorded using a three-dimensional motion capture system and two force plates. All exercises were performed without and with an ERB and two execution velocities. Hip joint kinematics, kinetics, muscle forces, and HJCF were calculated based on the musculoskeletal simulations in OpenSim. Time-normalized waveforms of the different exercise modalities were compared with each other and with reference values found during walking. The results showed that training with an ERB increases both target muscle forces and HJCF. Furthermore, the ERB reduced the hip joint range of motion during the exercises. The type of ERB used (soft vs. stiff ERB) and the execution velocity of the exercise had a minor impact on the peak muscle forces and HJCF. The velocity of exercise execution, however, had an influence on the total required muscle force. Performing hip exercises without an ERB resulted in similar or lower peak HJCF and lower muscle forces than those found during walking. Adding an ERB during hip exercises increased the peak muscle and HJCF but the values remained below those found during walking. Our workflow and findings can be used in conjunction with future studies to support exercise design.

ESB Clinical Biomechanics Award 2020: Pelvis and hip movement strategies discriminate typical and pathological femoral growth - Insights gained from a multi-scale mechanobiological modelling framework

BACKGROUND

Many children with cerebral palsy (CP) develop skeletal deformities during childhood. So far, it is unknown why some children with CP develop bony deformities whereas others do not. The aims of this study were to (i) investigate what loading characteristics lead to typical and pathological femoral growth, and (ii) evaluate why some children with CP develop femoral deformities whereas other do not.

METHODS

A multi-scale mechanobiological modelling workflow was used to simulate femoral growth based on three-dimensional motion capture data of six typically developing children and 16 children with CP. Based on the growth results, the participants with CP were divided into two groups: typical growth group and pathological growth group. Gait kinematics and femoral loading were compared between simulations resulting in typical growth and those resulting in pathologic growth.

FINDINGS

Hip joint contact forces were less posteriorly-oriented in the pathological growth simulations compared to the typical ones. Compared to the typically developing participants, the CP group with pathological femoral growth presented increased knee flexion and no hip extension. The CP group with simulated typical growth presented similar sagittal plane joint kinematics but differed in the frontal plane pelvic and hip movement strategy, which normalized the hip joint contact force and therefore contributed to typical femoral growth trends.

INTERPRETATION

Our simulation results identified specific gait features, which may contribute to pathological femoral growth. Furthermore, the hip joint contact force orientation in the sagittal plane seems to be the dominant factor for determining femoral growth simulations.

Effect of Gender and Load Conditions on Foot Arch Height Index and Flexibility in Japanese Youths

Arch height index (AHI) and arch height flexibility (AHF) are useful methods for evaluating foot structure. Although foot structure may be linked to intrinsic factors such as gender and load conditions, information on AHI and AHF in consideration of these factors is lacking. This study aimed to examine the effect of gender and load conditions on AHI and AHF. One hundred Japanese youths (50 males, 50 females) were recruited in this study. Arch height and truncated foot length were measured with an AHI measurement system. AHI was calculated for each load condition using truncated foot length and arch height. AHF was defined as the change in arch height from 10% to 50% of weightbearing load, and from 10% to 90% of weightbearing load. To satisfy the assumption of independence, only measurements from the right foot were analyzed. A gender × load condition interaction was found in AHI. AHI in all load conditions showed significant differences between the genders (p < .001), and AHI of female participants was significantly less than that of male participants (p < .001). In contrast, no significant gender × load condition interaction was noted in AHF, and only the main effect of the load condition was found (p < .001). In AHI use, the effects of gender and load conditions must be considered, and AHF may be used considering only changes in load conditions. The results of this study provide useful information regarding which normative values of AHI and AHF should be used.

Hip Joint Contact Loading and Muscle Forces During Running With a Transtibial Amputation

People with unilateral transtibial amputations (TTA) have greater risks of bilateral hip osteoarthritis, related to asymmetric biomechanics compared to people without TTA. Running is beneficial for physical health and is gaining popularity. However, people with TTA may not have access to running-specific prostheses (RSPs), which are designed for running, and may instead run using their daily-use prosthesis (DUP). Differences in joint loading may result from prosthesis choice; thus, it is important to characterize changes in peak and impulsive hip joint contact loading during running. Six people with and without TTA ran at 3.5 m/s while ground reaction forces, kinematics, and electromyography were collected. People with TTA ran using their own RSP and DUP. Musculoskeletal models incorporating prosthesis type of each individual were used to quantify individual muscle forces and hip joint contact forces (HJCFs) during running. People using RSPs had smaller bilateral peak hip joint contact forces compared to when wearing DUPs during stance and swing, and a smaller impulse over the entire gait cycle. Greater amputated leg peak hip joint contact forces for people wearing DUPs compared to RSPs occurred with greater forces from the ipsilateral gluteus maximus during stance. People with TTA also had greater bilateral peak hip joint contact forces during swing compared to people without TTA, which occurred with greater peak gluteus medius forces. Running with more compliant RSPs may be beneficial for long-term joint health by reducing peak and impulsive hip loading compared to DUPs.

Differences in rearfoot, midfoot, and forefoot kinematics of normal foot and flatfoot during running

Flatfoot is a common foot deformity, which could contribute to running injuries such as medial tibial stress syndrome. Intrafoot kinematics of flatfoot during walking have often been documented using multisegment foot models. However, the intrafoot kinematics of flatfoot during running remains unclear, despite the possible relationship between flatfoot and running injuries. We aimed to clarify rearfoot, midfoot, and forefoot kinematics when running in participants with normal foot and flatfoot. Participants with the normal foot (n = 14) and flatfoot (n = 14) were asked to runover-ground at their preferred speed. Three-dimensional kinematics of the rearfoot, midfoot, and forefoot during running were calculated based on the Rizzoli foot model. A two-sample t-test of statistical parametric mapping was performed to determine differences between normal foot and flatfoot in time histories of intrafoot kinematics during running. No differences were found between groups in characteristics and spatiotemporal parameters. In the frontal rearfoot angle, a significantly increased eversion from 24% to 100% (p < .001) was observed in the flatfoot compared to the normal foot. At the midfoot angle, a significantly increased eversion from 0% to 4% (p < .049) and 21% to 100% (p < .001) was observed in the flatfoot compared to the normal foot. At the forefoot angle, a significantly increased inversion from 6% to 17% (p < .047) was observed in the flatfoot compared to the normal foot. These findings may be useful to explain why flatfoot could contribute to running injuries such as medial tibial stress syndrome.

Effects of Hip Abductor Strengthening on Musculoskeletal Loading in Hip Dysplasia Patients after Total Hip Replacement

Hip dysplasia patients after total hip replacement show worse functional performance compared to primary osteoarthritis patients, and unfortunately there is no research on muscle and joint loads that would help understand rehabilitation effects, motor dysfunctions and failure events. We tested the hypothesis that a higher functional improvement in hip dysplasia patients who received hip abductor strengthening after hip replacement, would result in different gait function and musculoskeletal loads during walking compared to patients who performed standard rehabilitation only. In vivo gait analysis and musculoskeletal modeling were used to analyze the differences in gait parameters and hip and muscle forces during walking between the two groups of patients. We found that, in a functional scenario of very mild abnormalities, the patients who performed muscle strengthening expressed a more physiological force pattern and a generally greater force in the operated limb, although statistically significant in limited portions of the gait cycle, and likely related to a higher gait speed. We conclude that in a low-demand task, the abductor strengthening program does not have a marked effect on hip loads, and further studies on hip dysplasia patients would help clarify the effect of muscle strengthening on loads.

Paggiosi M, McCloskey EV, Viceconti M, Mazzà C, Li X. Femoral neck strain prediction during level walking using a combined musculoskeletal and finite element model approach

Recently, coupled musculoskeletal-finite element modelling approaches have emerged as a way to investigate femoral neck loading during various daily activities. Combining personalised gait data with finite element models will not only allow us to study changes in motion/movement, but also their effects on critical internal structures, such as the femur. However, previous studies have been hampered by the small sample size and the lack of fully personalised data in order to construct the coupled model. Therefore, the aim of this study was to build a pipeline for a fully personalised multiscale (body-organ level) model to investigate the strain levels at the femoral neck during a normal gait cycle. Five postmenopausal women were included in this study. The CT and MRI scans of the lower limb, and gait data were collected for all participants. Muscle forces derived from the body level musculoskeletal models were used as boundary constraints on the finite element femur models. Principal strains were estimated at the femoral neck region during a full gait cycle. Considerable variation was found in the predicted peak strain among individuals with mean peak first principal strain of 0.24% ± 0.11% and mean third principal strain of -0.29% ± 0.24%. For four individuals, two overall peaks of the maximum strains were found to occur when both feet were in contact with the floor, while one individual had one peak at the toe-off phase. Both the joint contact forces and the muscular forces were found to substantially influence the loading at the femoral neck. A higher correlation was found between the predicted peak strains and the gluteus medius (R² ranged between 0.95 and 0.99) than the hip joint contact forces (R² ranged between 0.63 and 0.96). Therefore, the current findings suggest that personal variations are substantial, and hence it is important to consider multiple subjects before deriving general conclusions for a target population.

A Systematic Review of the Associations Between Inverse Dynamics and Musculoskeletal Modeling to Investigate Joint Loading in a Clinical Environment

The assessment of knee or hip joint loading by external joint moments is mainly used to draw conclusions on clinical decision making. However, the correlation between internal and external loads has not been systematically analyzed. This systematic review aims, therefore, to clarify the relationship between external and internal joint loading measures during gait. A systematic database search was performed to identify appropriate studies for inclusion. In total, 4,554 articles were identified, while 17 articles were finally included in data extraction. External joint loading parameters were calculated using the inverse dynamics approach and internal joint loading parameters by musculoskeletal modeling or instrumented prosthesis. It was found that the medial and total knee joint contact forces as well as hip joint contact forces in the first half of stance can be well predicted using external joint moments in the frontal plane, which is further improved by including the sagittal joint moment. Worse correlations were found for the peak in the second half of stance as well as for internal lateral knee joint contact forces. The estimation of external joint moments is useful for a general statement about the peak in the first half of stance or for the maximal loading. Nevertheless, when investigating diseases as valgus malalignment, the estimation of lateral knee joint contact forces is necessary for clinical decision making because external joint moments could not predict the lateral knee joint loading sufficient enough. Dependent on the clinical question, either estimating the external joint moments by inverse dynamics or internal joint contact forces by musculoskeletal modeling should be used.

Real-Time Prediction of Joint Forces by Motion Capture and Machine Learning

Conventional biomechanical modelling approaches involve the solution of large systems of equations that encode the complex mathematical representation of human motion and skeletal structure. To improve stability and computational speed, being a common bottleneck in current approaches, we apply machine learning to train surrogate models and to predict in near real-time, previously calculated medial and lateral knee contact forces (KCFs) of 54 young and elderly participants during treadmill walking in a speed range of 3 to 7 km/h. Predictions are obtained by fusing optical motion capture and musculoskeletal modeling-derived kinematic and force variables, into regression models using artificial neural networks (ANNs) and support vector regression (SVR). Training schemes included either data from all subjects (LeaveTrialsOut) or only from a portion of them (LeaveSubjectsOut), in combination with inclusion of ground reaction forces (GRFs) in the dataset or not. Results identify ANNs as the best-performing predictor of KCFs, both in terms of Pearson R (0.89-0.98 for LeaveTrialsOut and 0.45-0.85 for LeaveSubjectsOut) and percentage normalized root mean square error (0.67-2.35 for LeaveTrialsOut and 1.6-5.39 for LeaveSubjectsOut). When GRFs were omitted from the dataset, no substantial decrease in prediction power of both models was observed. Our findings showcase the strength of ANNs to predict simultaneously multi-component KCF during walking at different speeds-even in the absence of GRFs-particularly applicable in real-time applications that make use of knee loading conditions to guide and treat patients.

Racial differences in gait mechanics

The effect of race has rarely been investigated in biomechanics studies despite racial health disparities in the incidence of musculoskeletal injuries and disease, hindering both treatment and assessment of rehabilitation. The purpose of this study was to test the hypothesis that racial differences in gait mechanics exist between African Americans (AA) and white Americans (WA). Ninety-two participants (18-30 years old) were recruited with equal numbers in each racial group and sex. Self-selected walking speed was measured for each participant. 3D motion capture and force plate data were recorded during 7 walking trials at regular and fast set speeds. Step length, step width, peak vertical ground reaction force, peak hip extension, peak knee flexion, and peak ankle plantarflexion were computed for all trials at both set speeds. Multivariate and post-hoc univariate ANOVA models were fit to determine main and interaction effects of sex and race (SPSS V26, α = 0.05). Self-selected walking speed was slower in AA (p = 0.004, ƞ_p² = 0.088). No significant interactions between race and sex were identified. Males took longer steps (regular: p < 0.001, ƞ_p² = 0.288, fast: p < 0.001, ƞ_p² = 0.193) and had larger peak knee flexion (regular: p = 0.007, ƞ_p² = 0.081, fast: p < 0.001, ƞ_p² = 0.188) and ankle plantarflexion angles (regular: p = 0.050, ƞ_p² = 0.044, fast: p = 0.049, ƞ_p² = 0.044). Peak ankle plantarflexion angle (regular: p = 0.012, ƞ_p² = 0.071, fast: p < 0.001, ƞ_p² = 0.137) and peak hip extension angle during fast walking (p = 0.007, ƞ_p² = 0.083) were smaller in AA. Equivalency in gait measures between racial groups should not be assumed. Racially diverse study samples should be prioritized in the development of future research and individualized treatment protocols.

Bioinspired material architectures from bighorn sheep horncore velar bone for impact loading applications

Rocky Mountain bighorn sheep rams (Ovis canadensis canadensis) routinely conduct intraspecific combat where high energy cranial impacts are experienced. Previous studies have estimated cranial impact forces to be up to 3400 N during ramming, and prior finite element modeling studies showed the bony horncore stores 3 × more strain energy than the horn during impact. In the current study, the architecture of the porous bone within the horncore was quantified, mimicked, analyzed by finite element modeling, fabricated via additive manufacturing, and mechanically tested to determine the suitability of the novel bioinspired material architecture for use in running shoe midsoles. The iterative biomimicking design approach was able to tailor the mechanical behavior of the porous bone mimics. The approach produced 3D printed mimics that performed similarly to ethylene–vinyl acetate shoe materials in quasi-static loading. Furthermore, a quadratic relationship was discovered between impact force and stiffness in the porous bone mimics, which indicates a range of stiffness values that prevents impact force from becoming excessively high. These findings have implications for the design of novel bioinspired material architectures for minimizing impact force.

Investigation of the Relationship Between Peak Vertical Accelerations and Aerobic Exercise Intensity During Graded Walking and Running in Postmenopausal Women

How exercise intensity targets, calibrated according to oxygen consumption, relate to vertical impacts during weight-bearing exercise is currently unknown. The authors investigated the relationship between vertical peaks (VPs) and metabolic equivalents (METs) of oxygen consumption in 82 women during walking and running. The magnitude of VPs, measured using a hip-worn triaxial accelerometer, was derived from recommended aerobic exercise intensity targets. VPs were 0.63 ± 0.18g at the lower recommended absolute exercise intensity target (3 METs) but >1.5g at the upper end of moderate-intensity activities (1.90 ± 1.13g at 6 METs). Multilevel linear regression analyses identified speed and type of locomotion as the strongest independent predictors of VPs, explaining 54% and 11% of variance, respectively. The authors conclude that, in contrast to lower intensities, exercising close to or above the 6-MET threshold generates VPs of osteogenic potential, suggesting this could provide simultaneous benefits to decrease all-cause mortality and osteoporosis risk.

Lower functioning patients demonstrate atypical hip joint loading before and following total hip arthroplasty for osteoarthritis

Previous studies have established that up to 1 year post total hip arthroplasty (THA), patients do not recover normal function and the magnitude of hip joint loading remains reduced compared to healthy individuals. However, the temporal nature of the loading profile has not been considered to identify individuals who are at a greater risk of poor functional outcomes following THA. This study aimed to determine changes to the profile and magnitude of the resultant hip joint reaction force before and up to 6 months post-primary THA, and factors associated with atypical loading profiles. Hip joint loading was computed using a personalized lower-limb musculoskeletal model in 43 participants awaiting primary THA for osteoarthritis (mean age: SD = 65, 14 years; body mass index: SD = 30, 5 kg/m² ) before and up to 6 months after THA. Atypical, single-peak loading profiles were observed for 11 patients before surgery, where four showed a single peak at 6 months. Patients displaying a single-peak profile walked slower (mean difference: -0.4 m/s) compared to individuals displaying double-peak profile (P = <.001) and had significantly reduced sagittal plane hip range of motion during gait (mean difference -9.6°, P = <.001). Self-reported pain, function, and stiffness did not differentiate between patients with a single or double-peak loading profile. Individuals with a single-peak force profile did not meet the minimal clinically important hip range of motion during gait and would be classified as low-functioning THA patients. Clinical Relevance: The temporal nature of the force profile may help to identify individuals who are at the greatest risk of poor functional outcomes after THA.

Bilateral concomitant femoral neck stress fracture in a sedentary patient with anorexia nervosa

A 27 years old sedentary woman presented bilateral femoral neck stress fractures after having clinically recovered from anorexia nervosa and was treated with bilateral internal fixation.

Conclusion

Although light exercise is usually considered after recovery from anorexia nervosa to improve bone quality, this case of a sedentary patient suggests that weight gain, per se, could increase the stress fracture risk. Because of the physiological and psychological characteristics, these patients should be treated with a multi-disciplinary approach.

All About the Ligamentum Teres: From Biomechanical Role to Surgical Reconstruction

Intriguing anatomists and surgeons for centuries, the exact function and biomechanical significance of the ligamentum teres (LT) remains incompletely understood. The LT, also described as the ligamentum femoris capitis, is an intra-articular extrasynovial ligament extending from the cotyloid fossa of the acetabulum to the fovea on the femoral head. Some studies have described it as a vestigial structure in the adult hip. More recent biomechanical studies, however, along with histological and anatomical studies, have suggested the LT to have an important function in proprioception, nociception, and as a secondary stabilizer of the hip joint. The advent and increased utilization of hip arthroscopy to treat hip pathology over the past two decades has ignited a renewed interest in the role of the LT, as well as techniques and indications for management of pathology. In the constellation of intra-articular pain generators of the hip, LT injuries have historically been difficult to diagnose through physical examination or advanced imaging. Numerous classification systems have been proposed based on arthroscopic appearance, and for most cases, conservative management is adequate. In patients undergoing hip arthroscopy, LT débridement usually suffices, although in cases of persistent pain and severe instability, reconstruction of the ligament may be indicated. Multiple methods for reconstruction have been described, with the greatest variation in the method of acetabular fixation of the graft. Future research should focus on clarifying the role of the LT, appropriate surgical indications for reconstruction, and optimization of graft fixation within the acetabulum.

Evidence for habitual climbing in a Pleistocene hominin in South Africa

Here we present evidence of hominin locomotor behavior from the trabecular bone of the femur. We show evidence for habitual use of highly flexed hip postures, which could potentially indicate regular climbing in a South African hominin from Sterkfontein, which is either Paranthropus robustus or Homo. Second, we present evidence that Australopithecus africanus likely did not climb at the frequencies seen in extant nonhuman apes, and exhibits a modern, human-like pattern of loading at the hip joint. These results challenge the prevailing view of a single transition to bipedalism within the hominin clade by providing evidence of climbing in a more recent, non-Australopithecus South African hominin, and add to the increasing evidence for locomotor diversity in the hominin clade.

Bipedalism is a defining trait of the hominin lineage, associated with a transition from a more arboreal to a more terrestrial environment. While there is debate about when modern human-like bipedalism first appeared in hominins, all known South African hominins show morphological adaptations to bipedalism, suggesting that this was their predominant mode of locomotion. Here we present evidence that hominins preserved in the Sterkfontein Caves practiced two different locomotor repertoires. The trabecular structure of a proximal femur (StW 522) attributed to Australopithecus africanus exhibits a modern human-like bipedal locomotor pattern, while that of a geologically younger specimen (StW 311) attributed to either Homo sp. or Paranthropus robustus exhibits a pattern more similar to nonhuman apes, potentially suggesting regular bouts of both climbing and terrestrial bipedalism. Our results demonstrate distinct morphological differences, linked to behavioral differences between Australopithecus and later hominins in South Africa and contribute to the increasing evidence of locomotor diversity within the hominin clade.

Effects of walking speed on gait biomechanics in healthy participants: a systematic review and meta-analysis

BACKGROUND

Understanding the effects of gait speed on biomechanical variables is fundamental for a proper evaluation of alterations in gait, since pathological individuals tend to walk slower than healthy controls. Therefore, the aim of the study was to perform a systematic review of the effects of gait speed on spatiotemporal parameters, joint kinematics, joint kinetics, and ground reaction forces in healthy children, young adults, and older adults.

METHODS

A systematic electronic search was performed on PubMed, Embase, and Web of Science databases to identify studies published between 1980 and 2019. A modified Quality Index was applied to assess methodological quality, and effect sizes with 95% confidence intervals were calculated as the standardized mean differences. For the meta-analyses, a fixed or random effect model and the statistical heterogeneity were calculated using the I2 index.

RESULTS

Twenty original full-length studies were included in the final analyses with a total of 587 healthy individuals evaluated, of which four studies analyzed the gait pattern of 227 children, 16 studies of 310 young adults, and three studies of 59 older adults. In general, gait speed affected the amplitude of spatiotemporal gait parameters, joint kinematics, joint kinetics, and ground reaction forces with a decrease at slow speeds and increase at fast speeds in relation to the comfortable speed. Specifically, moderate-to-large effect sizes were found for each age group and speed: children (slow, - 3.61 to 0.59; fast, - 1.05 to 2.97), young adults (slow, - 3.56 to 4.06; fast, - 4.28 to 4.38), and older adults (slow, - 1.76 to 0.52; fast, - 0.29 to 1.43).

CONCLUSIONS

This review identified that speed affected the gait patterns of different populations with respect to the amplitude of spatiotemporal parameters, joint kinematics, joint kinetics, and ground reaction forces. Specifically, most of the values analyzed decreased at slower speeds and increased at faster speeds. Therefore, the effects of speed on gait patterns should also be considered when comparing the gait analysis of pathological individuals with normal or control ones.

Patient characteristics affect hip contact forces during gait

OBJECTIVE

To examine hip contact force (HCF), calculated through multibody modelling, in a large total hip replacement (THR) cohort stratified by patient characteristics such as body mass index (BMI), age and function.

METHOD

132 THR patients undertook one motion capture session of gait analysis at a self-selected walking speed. HCFs were then calculated using the AnyBody Modelling System. Patients were stratified into three BMI groups, five age groups, and finally three functional groups determined by their self-selected gait speed. By means of statistical parametric mapping (SPM), statistical analyses of the 1-dimensional time series were performed to separately evaluate the influence of age, BMI and functionality on HCF.

RESULTS

The mean predicted HCFs were comparable to HCFs measured with instrumented prostheses reported in the literature. The SPM analysis revealed a statistically significant positive linear correlation between BMI and HCF, indicating that obese patients are more likely to experience higher HCF during most of the stance phase, while a statistically significant negative correlation with age was found only during the late swing-phase. Patients with higher functional ability exhibited significantly increased peak HCF, while patients with lower functional ability demonstrated lower HCFs overall and a pathological flattening of the typical double hump force profile.

CONCLUSION

HCFs experienced at the bearing surface are highly dependent on patient characteristics. BMI and functional ability were determined to have the biggest influence on contact forces. Current preclinical testing standards do not reflect this.

Foot Pronation Contributes to Altered Lower Extremity Loading After Long Distance Running

This study presents an investigation of the changes in foot posture, joint kinematics, joint moments and joint contact forces in the lower extremity following a 5 k treadmill run. A relationship between knee and ankle joint loading and foot posture index (FPI) is developed. Twenty recreational male heel-strike runners participated in this study. All participants had a history of running exercise and were free from lower extremity injuries and foot deformities. Foot posture was assessed from a six-item FPI to quantitatively classify high supination to high pronation foot poses. The FPI is scored using a combination of observations and foot palpations. The three-dimensional marker trajectories, ground reaction force and surface electromyography (EMG) were recorded at pre and post-gait sessions conducted over-ground and 5 k running was conducted on a treadmill. Joint kinematics, joint moments and joint contact forces were computed in OpenSim. Simulated EMG activations were compared against experimental EMG to validate the model. A paired sample t-test was conducted using a 1D statistical parametric mapping method computed temporally. Hip joint moments and contact forces increased during initial foot contact following 5 k running. Knee abduction moment and superior-inferior knee contact force increased, whereas the knee extension moment decreased. Ankle plantarflexion moment and ankle contact forces increased during stance. FPI was found to be moderately correlated with peak knee and ankle moments. Recreational male runners presented increased static foot pronation after 5 k treadmill running. These findings suggest that following mid distance running foot pronation may be an early indicator of increased lower limb joint loading. Furthermore, the FPI may be used to quantify the changes in knee and ankle joint moments.

Trabecular architecture of the great ape and human femoral head

Studies of femoral trabecular structure have shown that the orientation and volume of bone are associated with variation in loading and could be informative about individual joint positioning during locomotion. In this study, we analyse for the first time trabecular bone patterns throughout the femoral head using a whole-epiphysis approach to investigate how potential trabecular variation in humans and great apes relates to differences in locomotor modes. Trabecular architecture was analysed using microCT scans of Pan troglodytes (n = 20), Gorilla gorilla (n = 14), Pongo sp. (n = 5) and Homo sapiens (n = 12) in medtool 4.1. Our results revealed differences in bone volume fraction (BV/TV) distribution patterns, as well as overall trabecular parameters of the femoral head between great apes and humans. Pan and Gorilla showed two regions of high BV/TV in the femoral head, consistent with hip posture and loading during two discrete locomotor modes: knuckle-walking and climbing. Most Pongo specimens also displayed two regions of high BV/TV, but these regions were less discrete and there was more variability across the sample. In contrast, Homo showed only one main region of high BV/TV in the femoral head and had the lowest BV/TV, as well as the most anisotropic trabeculae. The Homo trabecular structure is consistent with stereotypical loading with a more extended hip compared with great apes, which is characteristic of modern human bipedalism. Our results suggest that holistic evaluations of femoral head trabecular architecture can reveal previously undetected patterns linked to locomotor behaviour in extant apes and can provide further insight into hip joint loading in fossil hominins and other primates.

Risk analysis of patients with an osteolytic acetabular defect after total hip arthroplasty using subject-specific finite-element modelling

Aims

Osteolysis, secondary to local and systemic physiological effects, is a major challenge in total hip arthroplasty (THA). While osteolytic defects are commonly observed in long-term follow-up, how such lesions alter the distribution of stress is unclear. The aim of this study was to quantitatively describe the biomechanical implication of such lesions by performing subject-specific finite-element (FE) analysis on patients with osteolysis after THA.

Patients and Methods

A total of 22 hemipelvis FE models were constructed in order to assess the transfer of load in 11 patients with osteolysis around the acetabular component of a THA during slow walking and a fall onto the side. There were nine men and two women. Their mean age was 69 years (55 to 81) at final follow-up. Changes in peak stress values and loads to fracture in the presence of the osteolytic defects were measured.

Results

The von Mises stresses were increased in models of those with and those without defects for both loading scenarios. Although some regions showed increases in stress values of up to 100%, there was only a moderate 11.2% increase in von Mises stress in the series as a whole. The site of fracture changed in some models with lowering of the load to fracture by 500 N. The most common site of fracture was the pubic ramus. This was more frequent in models with larger defects.

Conclusion

We conclude that cancellous defects cause increases in stress within cortical structures. However, these are likely to lead to a modest decrease in the load to fracture if the defect is large (> 20cm3) or if the patient is small with thin cortical structures and low bone mineral density. Cite this article: Bone Joint J 2018;100-B:1455–62.

Cancellous bone and theropod dinosaur locomotion. Part II-a new approach to inferring posture and locomotor biomechanics in extinct tetrapod vertebrates

This paper is the second of a three-part series that investigates the architecture of cancellous bone in the main hindlimb bones of theropod dinosaurs, and uses cancellous bone architectural patterns to infer locomotor biomechanics in extinct non-avian species. Cancellous bone is widely known to be highly sensitive to its mechanical environment, and therefore has the potential to provide insight into locomotor biomechanics in extinct tetrapod vertebrates such as dinosaurs. Here in Part II, a new biomechanical modelling approach is outlined, one which mechanistically links cancellous bone architectural patterns with three-dimensional musculoskeletal and finite element modelling of the hindlimb. In particular, the architecture of cancellous bone is used to derive a single 'characteristic posture' for a given species-one in which bone continuum-level principal stresses best align with cancellous bone fabric-and thereby clarify hindlimb locomotor biomechanics. The quasi-static approach was validated for an extant theropod, the chicken, and is shown to provide a good estimate of limb posture at around mid-stance. It also provides reasonable predictions of bone loading mechanics, especially for the proximal hindlimb, and also provides a broadly accurate assessment of muscle recruitment insofar as limb stabilization is concerned. In addition to being useful for better understanding locomotor biomechanics in extant species, the approach hence provides a new avenue by which to analyse, test and refine palaeobiomechanical hypotheses, not just for extinct theropods, but potentially many other extinct tetrapod groups as well.

Long-term hip loading in unilateral total hip replacement patients is no different between limbs or compared to healthy controls at similar walking speeds

Variation in hip joint contact forces directly influences the performance of total hip replacements (THRs). Measurement and calculation of contact forces in THR patients has been limited by small sample sizes, wide variation in patient and surgical factors, and short-term follow-up. This study hypothesised that, at long-term follow-up, unilateral THR patients have similar calculated hip contact forces compared to controls walking at similar (self-selected) speeds and, in contrast, THR patients walking at slower (self-selected) speeds have reduced hip contact forces. It was further hypothesised that there is no difference in calculated hip contact forces between operated and non-operated limbs at long-term follow-up for both faster and slower patients. Gait analysis data for THR patients walking at faster (walking speed: 1.29 ± 0.12 m/s; n = 11) and slower (walking speed: 0.72 ± 0.09 m/s; n = 11) speeds were used. Healthy subjects constituted the control group (walking speed: 1.36 ± 0.12 m/s; n = 10). Hip contact forces were calculated using static optimisation. There was no significant difference (p > 0.31) in hip contact forces between faster and control groups. Conversely, force was reduced at heel strike by 19% (p = 0.002), toe-off by 31% (p < 0.001) and increased at mid-stance by 15% (p = 0.02) for the slower group compared to controls. There were no differences between operated and non-operated limbs for the slower group or the faster group, suggesting good biomechanical recovery at long-term follow-up. Loading, at different walking speeds, presented here can improve the relevance of preclinical testing methods.

Mechanical loading characteristics of total hip prosthetics subjected to dynamic loading cycles

The selection of best material pair in the hip prosthetics design for improved performance and life relies on the estimation of hip joint contact stresses and contact pressure distribution during various dynamic loading cycles: Climbing Upstairs, Climbing downstairs and Knee bending. The maximum Von Mises stress, contact pressure and deformation are considered factors in selecting the material pair in this current study. This is done by analysis of a three-dimensional finite element model of the acetabular component during the different dynamics cycles using ANSYS®. The different material combination of bearing couples considered for this analysis are metal in contact with plastic, metal on metal, metal on ceramic, ceramic on plastic, ceramic on metal and ceramic on ceramic. The numerical results were validated by comparing them with the FEA results of Hai-Bo Jiang et al. for the existing material combinations and a high correlation of 92% was observed. We found that the Alumina femoral head paired with ultra-high molecular weight polyethylene (UHMWPE) cup reduces the maximum Von Mises stress and maximum contact pressure developed at the interface amongst other material pairs.