Scaffold-free tissue-engineered cartilage implants for laryngotracheal reconstruction

Challenges and Opportunities in Developing Tracheal Substitutes for the Recovery of Long-Segment Defects

Tracheal resection and reconstruction procedures are necessary when stenosis, tracheomalacia, tumors, vascular lesions, or tracheal injury cause a tracheal blockage. Replacement with a tracheal substitute is often recommended when the trauma exceeds 50% of the total length of the trachea in adults and 30% in children. Recently, tissue engineering and other advanced techniques have shown promise in fabricating biocompatible tracheal substitutes with physical, morphological, biomechanical, and biological characteristics similar to native trachea. Different polymers and biometals are explored. Even with limited success with tissue-engineered grafts in clinical settings, complete healing of tracheal defects remains a substantial challenge due to low mechanical strength and durability of the graft materials, inadequate re-epithelialization and vascularization, and restenosis. This review has covered a range of reconstructive and regenerative techniques, design criteria, the use of bioprostheses and synthetic grafts for the recovery of tracheal defects, as well as the traditional and cutting-edge methods of their fabrication, surface modification for increased immuno- or biocompatibility, and associated challenges.

A Pilot Study of Decellularized Cartilage for Laryngotracheal Reconstruction in a Neonatal Pig Model

OBJECTIVE

Severe subglottic stenosis develops as a response to intubation in 1% of the >200,000 neonatal intensive care unit infants per year and may require laryngotracheal reconstruction (LTR) with autologous hyaline cartilage. Although effective, LTR is limited by comorbidities, severity of stenosis, and graft integration. In children, there is a significant incidence of restenosis requiring revision surgery. Tissue engineering has been proposed to develop alterative grafting options to improve outcomes and eliminate donor-site morbidity. Our objective is to engineer a decellularized, channel-laden xenogeneic cartilage graft, that we deployed in a proof-of-concept, neonatal porcine LTR model.

METHODS

Meniscal porcine cartilage was freeze-thawed and washed with pepsin/elastase to decellularize and create microchannels. A 6 × 10-mm decellularized cartilage graft was then implanted in 4 infant pigs in an anterior cricoid split. Airway patency and host response were monitored endoscopically until sacrifice at 12 weeks, when the construct phenotype, cricoid expansion, mechanics, and histomorphometry were evaluated.

RESULTS

The selective digestion of meniscal components yielded decellularized cartilage with cell-size channels. After LTR with decellularized meniscus, neonatal pigs were monitored via periodic endoscopy observing re-epithelization, integration, and neocartilage formation. At 12 weeks, the graft appeared integrated and exhibited airway expansion of 4 mm in micro-CT and endoscopy. Micro-CT revealed a larger lumen compared with age-matched controls. Finally, histology showed significant neocartilage formation.

CONCLUSION

Our neonatal porcine LTR model with a decellularized cartilage graft is a novel approach to tissue engineered pediatric LTR. This pilot study sets the stage for "off-the-shelf" graft procurement and future optimization of MEND for LTR.

LEVEL OF EVIDENCE

NA Laryngoscope, 134:807-814, 2024.

Characterization of a decellularized rat larynx: comparison between microscopy techniques

BACKGROUND

No effective method has yet been developed to efficiently reconstruct the larynx and restore its function. Decellularization has recently been tested for this purpose with very promising results. The goal of decellularization is to remove cells leaving an intact scaffold made of an extracellular matrix (ECM). Although the use of hematoxylin/eosin and Masson trichrome stains is widely accepted to highlight tissue structure, the methods based on evaluation of collagen and elastin are considered highly variable. The aim of this study was to develop a whole organ decellularization protocol and compare the qualitative and quantitative efficiency of some microscopy techniques for collagen and elastin detection in paraffin-embedded tissues.

METHODS

H&E, Masson Trichrome and DAPI staining as well as DNA quantification were used to evaluate decellularization efficiency. Van Gieson stain, Picrosirius Red stain (PRS) and multiphoton laser scanning microscopy (MPM) were carried out for collagen detection and quantitative assessment. Polarized PRS was used to investigate collagen network, and Weigert stain and MPM were used to detect and estimate elastin content.

RESULTS

The decellularization process removed the cellular components without affecting glycosaminoglycan, collagen and elastin content. Concerning collagen quantification, Van Gieson stain underestimated collagen content, while PRS, apparently less fading, did not reach reliable results when used as quantitative method. MPM effectively quantified collagen content. Collagen fibers were visualized much better under polarized light microscopy, allowing to underline that decellularization process affects the homogeneity of 3D collagen network. Concerning elastin detection, Weigert stain and MPM produced overlapping results.

CONCLUSIONS

An efficient protocol to decellularize the whole larynx was developed, allowing the removal of cells without affecting ECM integrity. The results supported the use of non-polarized PRS to highlight collagen, even the thin fibers, second harmonic generation for major fibrillar collagens and polarized PRS for 3D collagen network. Concerning elastin, Weigert stain and MPM showed similar results, thus the use of MPM, rather than that of the Weigert stain, may be suitable to avoid the additional time and costs of a histological staining.

A Human Osteochondral Tissue Model Mimicking Cytokine-Induced Key Features of Arthritis In Vitro

Adequate tissue engineered models are required to further understand the (patho)physiological mechanism involved in the destructive processes of cartilage and subchondral bone during rheumatoid arthritis (RA). Therefore, we developed a human in vitro 3D osteochondral tissue model (OTM), mimicking cytokine-induced cellular and matrix-related changes leading to cartilage degradation and bone destruction in order to ultimately provide a preclinical drug screening tool. To this end, the OTM was engineered by co-cultivation of mesenchymal stromal cell (MSC)-derived bone and cartilage components in a 3D environment. It was comprehensively characterized on cell, protein, and mRNA level. Stimulating the OTM with pro-inflammatory cytokines, relevant in RA (tumor necrosis factor α, interleukin-6, macrophage migration inhibitory factor), caused cell- and matrix-related changes, resulting in a significantly induced gene expression of lactate dehydrogenase A, interleukin-8 and tumor necrosis factor α in both, cartilage and bone, while the matrix metalloproteases 1 and 3 were only induced in cartilage. Finally, application of target-specific drugs prevented the induction of inflammation and matrix-degradation. Thus, we here provide evidence that our human in vitro 3D OTM mimics cytokine-induced cell- and matrix-related changes—key features of RA—and may serve as a preclinical tool for the evaluation of both new targets and potential drugs in a more translational setup.

Tissue engineering of the larynx: A contemporary review

Objective

Tissue engineering has been a topic of extensive research in recent years and has been applied to the regeneration and restoration of many organs including the larynx. Currently, research investigating tissue engineering of the larynx is either ongoing or in the preclinical trial stage.

Methods

A literature search was performed on the Advanced search field of PubMed using the keywords: “(laryncheal tissue engineering) AND (cartilage regeneration OR scaffolds OR stem cells OR biomolecules).” After applying the selection criteria, 65 articles were included in the study.

Results

The present review focuses on the rapidly expanding field of tissue‐engineered larynx, which aims to provide stem cell–based scaffolds combined with biological active factors such as growth factors for larynx reconstruction and regeneration. The trend in recent studies is to use new techniques for scaffold construction, such as 3D printing, are developed. All of these strategies have been instrumental in guiding optimization of the tissue‐engineered larynx, leading to a level of clinical induction beyond the in vivo animal experimental phase.

Conclusions

This review summarizes the current progress and outlines the necessary basic components of regenerative laryngeal medicine in preclinical fields. Finally, it considers the design of scaffolds, support of growth factors, and cell therapies toward potential clinical application.

Physioxia Stimulates Extracellular Matrix Deposition and Increases Mechanical Properties of Human Chondrocyte-Derived Tissue-Engineered Cartilage

Cartilage tissue has been recalcitrant to tissue engineering approaches. In this study, human chondrocytes were formed into self-assembled cartilage sheets, cultured in physiologic (5%) and atmospheric (20%) oxygen conditions and underwent biochemical, histological and biomechanical analysis at 1- and 2-months. The results indicated that sheets formed at physiological oxygen tension were thicker, contained greater amounts of glycosaminoglycans (GAGs) and type II collagen, and had greater compressive and tensile properties than those cultured in atmospheric oxygen. In all cases, cartilage sheets stained throughout for extracellular matrix components. Type II-IX-XI collagen heteropolymer formed in the neo-cartilage and fibrils were stabilized by trivalent pyridinoline cross-links. Collagen cross-links were not significantly affected by oxygen tension but increased with time in culture. Physiological oxygen tension and longer culture periods both served to increase extracellular matrix components. The foremost correlation was found between compressive stiffness and the GAG to collagen ratio.

Standardization of Microcomputed Tomography for Tracheal Tissue Engineering Analysis

Tracheal tissue engineering has become an active area of interest among clinical and scientific communities; however, methods to evaluate success of in vivo tissue-engineered solutions remain primarily qualitative. These evaluation methods have generally relied on the use of photographs to qualitatively demonstrate tracheal patency, endoscopy to image healing over time, and histology to determine the quality of the regenerated extracellular matrix. Although those generally qualitative methods are valuable, they alone may be insufficient. Therefore, to quantitatively assess tracheal regeneration, we recommend the inclusion of microcomputed tomography (μCT) to quantify tracheal patency as a standard outcome analysis. To establish a standard of practice for quantitative μCT assessment for tracheal tissue engineering, we recommend selecting a constant length to quantify airway volume. Dividing airway volumes by a constant length provides an average cross-sectional area for comparing groups. We caution against selecting a length that is unjustifiably large, which may result in artificially inflating the average cross-sectional area and thereby diminishing the ability to detect actual differences between a test group and a healthy control. Therefore, we recommend selecting a length for μCT assessment that corresponds to the length of the defect region. We further recommend quantifying the minimum cross-sectional area, which does not depend on the length, but has functional implications for breathing. We present empirical data to elucidate the rationale for these recommendations. These empirical data may at first glance appear as expected and unsurprising. However, these standard methods for performing μCT and presentation of results do not yet exist in the literature, and are necessary to improve reporting within the field. Quantitative analyses will better enable comparisons between future publications within the tracheal tissue engineering community and empower a more rigorous assessment of results. Impact statement The current study argues for the standardization of microcomputed tomography (μCT) as a quantitative method for evaluating tracheal tissue-engineered solutions in vivo or ex vivo. The field of tracheal tissue engineering has generally relied on the use of qualitative methods for determining tracheal patency. A standardized quantitative evaluation method currently does not exist. The standardization of μCT for evaluation of in vivo studies would enable a more robust characterization and allow comparisons between groups within the field. The impact of standardized methods within the tracheal tissue engineering field as presented in the current study would greatly improve the quality of published work.

Platelet-rich plasma for laryngotracheal reconstruction: an experimental study

OBJECTIVES/HYPOTHESIS

This study was designed to evaluate the graft healing effect of topical application of platelet-rich plasma (PRP) for laryngotracheal reconstruction (LTR) in a rabbit model.

STUDY DESIGN

It is a prospective randomized control animal study.

MATERIALS AND METHODS

Sixteen healthy New Zealand White rabbits were assigned to two groups of eight animals each. The control group underwent LTR with anterior auricular cartilage graft. The PRP group underwent the same surgical procedure plus PRP application over the anastomosis and surgical field. Two animals in the PRP group and two animals in control group died due to severe respiratory distress on postoperative days 10, 12, 15, and 18. Six rabbits (n = 3 for control group and n = 3 for PRP group) were sacrificed at 4 weeks, and six rabbits (n = 3 for control group and n = 3 for PRP group) were sacrificed at 8 weeks. Laryngotracheal regions were evaluated histopathologically.

RESULTS

Macroscopically, the average anteroposterior and lateral diameter of the reconstructed region and the degree of lumen patency on postoperative 4th week and 8th week were not statistically different among two groups. There was no significant difference between the groups in terms of any of the microscopic findings when the analysis was made separately. However, analysis of the total number of rabbits has shown that new cartilage formation and angiogenesis were more pronounced in PRP group than control group.

CONCLUSIONS

Application of PRP contributed to better healing in airway surgery by promoting a release of growth factors that stimulate new cartilage formation and angiogenesis.

Biodegradable electrospun patch containing cell adhesion or antimicrobial compounds for trachea repair in vivo

Difficulty breathing due to tracheal stenosis (i.e. narrowed airway) diminishes the quality of life and can potentially be life-threatening. Tracheal stenosis can be caused by congenital anomalies, external trauma, infection, intubation-related injury, and tumors. Common treatment methods for tracheal stenosis requiring surgical intervention include end-to-end anastomosis, slide tracheoplasty and/or laryngotracheal reconstruction. Although the current methods have demonstrated promise for treatment of tracheal stenosis, a clear need exists for the development of new biomaterials that can hold the trachea open after the stenosed region has been surgically opened, and that can support healing without the need to harvest autologous tissue from the patient. The current study therefore evaluated the use of electrospun nanofiber scaffolds encapsulating 3D-printed PCL rings to patch induced defects in rabbit tracheas. The nanofibers were a blend of polycaprolactone (PCL) and polylactide-co-caprolactone (PLCL), and encapsulated either the cell adhesion peptide, RGD, or antimicrobial compound, ceragenin-131 (CSA). Blank PCL/PLCL and PCL were employed as control groups. Electrospun patches were evaluated in a rabbit tracheal defect model for 12 weeks, which demonstrated re-epithelialization of the luminal side of the defect. No significant difference in lumen volume was observed for the PCL/PLCL patches compared to the uninjured positive control. Only the RGD group did not lead to a significant decrease in the minimum cross-sectional area compared to the uninjured positive control. CSA reduced bacteria growth in vitro, but did not add clear value in vivo. Adequate tissue in-growth into the patches and minimal tissue overgrowth was observed inside the patch material. Areas of future investigation include tuning the material degradation time to balance cell adhesion and structural integrity.

Differential epithelial growth in tissue-engineered larynx and trachea generated from postnatal and fetal progenitor cells

Postnatal organ-specific stem and progenitor cells are an attractive potential donor cell for tissue-engineering because they can be harvested autologous from the recipient and have sufficient potential to regenerate the tissue of interest with less risk for ectopic growth or tumor formation compared to donor cells from embryonic or fetal sources. We describe the generation of tissue-engineered larynx and trachea (TELT) from human and mouse postnatal organoid units (OU) as well as from human fetal OU. Mouse TELT contained differentiated respiratory epithelium lining large lumens, cartilage and smooth muscle. In contrast, human postnatal TE trachea, formed small epithelial lumens with rare differentiation, in addition to smooth muscle and cartilage. Human fetal TELT contained the largest epithelial lumens with all differentiated cell types as well as smooth muscle and cartilage. Increased epithelial cytokeratin 14 was identified in both human fetal and postnatal TELT compared to native trachea, consistent with regenerative basal cells. Cilia in TELT epithelium also demonstrated function with beating movements. While both human postnatal and fetal progenitors have the potential to generate TELT, there is more epithelial growth and differentiation from fetal progenitors, highlighting fundamental differences in these cell populations.

A systematic review of simulated laryngotracheal reconstruction animal models

OBJECTIVES

Review of the literature to identify practical, high-fidelity, commercially available animal models for simulation training and surgical skills maintenance in laryngotracheal reconstruction (LTR).

METHODS

A systematic review of PubMed and Embase databases was conducted independently by two authors, according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Search terms included "laryngotracheal reconstruction," "laryngotracheoplasty," "pig and larynx," "sheep and larynx," and "rabbit and larynx." Articles were then assessed, identifying model cost and availability, model validation, feasibility as a training tool, and verisimilitude to pediatric LTR.

RESULTS

In total, 79 articles were considered suitable for inclusion in the study, incorporating both in vitro and in vivo models. Models utilized included rabbit (n = 69), pig (n = 7), sheep (n = 1), and goat (n = 2). The rabbit model was similar in size to the neonate, but differences in laryngeal anatomy and cartilage texture made graft insertion difficult. The anatomy of the pig, sheep, and goat larynges more closely resembled the pediatric patient, allowing improved grafting, but corresponded more in size to that of an older child. Commercial availability of the pig and sheep was considered greatest, and was reflected in cost. None of the animal models identified in the literature have been validated as a simulation tool.

CONCLUSIONS

The rabbit, sheep and pig models seemed to demonstrate the greatest potential for use as advanced pediatric airway surgery simulation models, with the rabbit model being most utilized in the literature. However, as yet there have been no models formally validated as a simulation training tool. Laryngoscope, 129:235-243, 2019.

A Modular Strategy to Engineer Complex Tissues and Organs

Currently, there are no synthetic or biologic materials suitable for long-term treatment of large tracheal defects. A successful tracheal replacement must (1) have radial rigidity to prevent airway collapse during respiration, (2) contain an immunoprotective respiratory epithelium, and (3) integrate with the host vasculature to support epithelium viability. Herein, biopolymer microspheres are used to deliver chondrogenic growth factors to human mesenchymal stem cells (hMSCs) seeded in a custom mold that self-assemble into cartilage rings, which can be fused into tubes. These rings and tubes can be fabricated with tunable wall thicknesses and lumen diameters with promising mechanical properties for airway collapse prevention. Epithelialized cartilage is developed by establishing a spatially defined composite tissue composed of human epithelial cells on the surface of an hMSC-derived cartilage sheet. Prevascular rings comprised of human umbilical vein endothelial cells and hMSCs are fused with cartilage rings to form prevascular-cartilage composite tubes, which are then coated with human epithelial cells, forming a tri-tissue construct. When prevascular- cartilage tubes are implanted subcutaneously in mice, the prevascular structures anastomose with host vasculature, demonstrated by their ability to be perfused. This microparticle-cell self-assembly strategy is promising for engineering complex tissues such as a multi-tissue composite trachea.

Trachea Mechanics for Tissue Engineering Design

Trachea replacement for nonoperable defects remains an unsolved problem due to complications with stenosis and mechanical insufficiency. While native trachea has anisotropic mechanical properties, the vast majority of engineered constructs focus on uniform cartilaginous-like conduits. These conduits often lack quantitative mechanical analysis at the construct level, which limits analysis of functional outcomes in vivo, as well as comparisons across studies. This review aims to present a clear picture of native tracheal mechanics at the tissue and organ level, as well as loading conditions to establish design criteria for trachea replacements. We further explore the implications of failing to match native properties with regards to implant collapse, stenosis, and infection.

Generating Mechanically Stable, Pediatric, and Scaffold-Free Nasal Cartilage Constructs In Vitro

Traditional methods of cartilage tissue engineering rely on the use of scaffolds. Although successful chondrogenesis has been reported in scaffold-based constructs, the use of exogenous materials has limited their application due to eliciting host immunogenic responses and potentially resulting in construct failure. As a result, tissue engineering approaches, which aim to generate scaffold-free cartilaginous constructs, have become of particular interest. Here, we generated stable three-dimensional scaffold-free cartilaginous constructs by cultivating expanded pediatric nasal chondrocyte multilayers in a slow turning lateral vessel bioreactor system under chemically defined media. Bioreactor cultivation resulted in increased construct cellularity, fourfold tissue thickness, and 200% sulfated glycosaminoglycan deposition with respect to static culture equivalent cultures. These improvements led to significantly enhanced mechanical and biochemical properties of bioreactor-cultivated constructs, allowing them to support their own weight, while static culture constructs remained fragile. Consequently, bioreactor-cultivated constructs closely resembled native nasal cartilage tissue histologically, mechanically, and biochemically. We propose that this method of cartilage construct formation could be used to obtain readily available human scaffold-free cartilaginous constructs.

Tissue engineering of a composite trachea construct using autologous rabbit chondrocytes

The repair of large tracheal segmental defects remains an unsolved problem. The goal of this study is to apply tissue engineering principles for the fabrication of large segmental trachea replacements. Engineered tracheal replacements composed of autologous cells (neotracheas) were tested in a New Zealand White rabbit model. Neotracheas were formed in the rabbit neck by wrapping a silicone tube with consecutive layers of skin epithelium, platysma muscle, and an engineered cartilage sheet and allowing the construct to mature for 8-12 weeks. In total, 28 rabbits were implanted and the neotracheas assessed for tissue morphology. In 11 cases, neotracheas deemed sufficiently strong were used to repair segmental tracheal defects. Initially, the success rate of producing structurally sound neotracheas was impeded by physical disruption of the cartilage sheets during animal handling, but by the end of the study, 15 of 18 neotracheas (83.3%) were structurally sound. Of the 15 structurally sound neotracheas, 11 were used for segmental reconstruction and were left in place for up to 21 days. Histological examination showed the presence of variable amounts of viable epithelium, a vascularized platysma flap, and a layer of safranin O-positive cartilage along with evidence of endochondral ossification. Rabbits that had undergone segmental reconstruction showed good tracheal integration, had a viable epithelium with vascular support, and the cartilage was sufficiently strong to maintain a lumen when palpated. The results demonstrated that viable, trilayered, scaffold-free neotracheas could be constructed from autologous cells and could be integrated into native trachea to repair a segmental defect.

Autologous Cell Seeding in Tracheal Tissue Engineering

Purpose of Review

There is no consensus on the best technology to be employed for tracheal replacement. One particularly promising approach is based upon tissue engineering and involves applying autologous cells to transplantable scaffolds. Here, we present the reported pre-clinical and clinical data exploring the various options for achieving such seeding.

Recent Findings

Various cell combinations, delivery strategies, and outcome measures are described. Mesenchymal stem cells (MSCs) are the most widely employed cell type in tracheal bioengineering. Airway epithelial cell luminal seeding is also widely employed, alone or in combination with other cell types. Combinations have thus far shown the greatest promise. Chondrocytes may improve mechanical outcomes in pre-clinical models, but have not been clinically tested. Rapid or pre-vascularization of scaffolds is an important consideration. Overall, there are few published objective measures of post-seeding cell viability, survival, or overall efficacy.

Summary

There is no clear consensus on the optimal cell-scaffold combination and mechanisms for seeding. Systematic in vivo work is required to assess differences between tracheal grafts seeded with combinations of clinically deliverable cell types using objective outcome measures, including those for functionality and host immune response.

Electronic supplementary material

The online version of this article (10.1007/s40778-017-0108-2) contains supplementary material, which is available to authorized users.

Scaffold-free approach produces neocartilage tissue of similar quality as the use of HyStem™ and Hydromatrix™ scaffolds

Numerous biomaterials are being considered for cartilage tissue engineering, while scaffold-free systems have also been introduced. Thus, it is important to know do the scaffolds improve the formation of manufactured neocartilages. This study compares scaffold-free cultures to two scaffold-containing ones. Six million bovine primary chondrocytes were embedded in HyStem™ or HydroMatrix™ scaffolds, or suspended in scaffold-free chondrocyte culture medium, and then loaded into agarose gel supported culture well pockets. Neocartilages were grown in the presence of hypertonic high glucose DMEM medium for up to 6 weeks. By the end of culture periods, the formed tissues were analyzed by histological staining for proteoglycans (PGs) and type II collagen, gene expression measurements of aggrecan, Sox9, procollagen α₁(II), and procollagen α₂(I) were performed using quantitative RT-PCR, and analyses of PG contents and structure were conducted by spectrophotometric and agarose gel electrophoretic methods. Histological stainings showed that the PGs and type II collagen were abundantly present in both the scaffold-free and the scaffold-containing tissues. The PG content gradually increased following the culture period. However, the mRNA expression levels of the cartilage-specific genes of aggrecan, procollagen α₁(II) and Sox9 gradually decreased following culture period, while procollagen α₂(I) levels increased. After 6-week-cultivations, the PG concentrations in neocartilage tissues manufactured with HyStem™ or HydroMatrix™ scaffolds, and in scaffold-free agarose gel-supported cell cultures, were similar to native cartilage. No obvious benefits could be seen on the extracellular matrix assembly in HyStem™ or HydroMatrix™ scaffolds cultures.

Tissue-engineered trachea: A review

Tracheal replacement is performed after resection of a portion of the trachea that was impossible to reconnect via direct anastomosis. A tissue-engineered trachea is one of the available options that offer many advantages compared to other types of graft. Fabrication of a functional tissue-engineered trachea for grafting is very challenging, as it is a complex organ with important components, including cartilage, epithelium and vasculature. A number of studies have been reported on the preparation of a graftable trachea. A laterally rigid but longitudinally flexible hollow cylindrical scaffold which supports cartilage and epithelial tissue formation is the key element. The scaffold can be prepared via decellularization of an allograft or fabricated using biodegradable or non-biodegradable biomaterials. Commonly, the scaffold is seeded with chondrocytes and epithelial cells at the outer and luminal surfaces, respectively, to hasten tissue formation and improve functionality. To date, several clinical trials of tracheal replacement with tissue-engineered trachea have been performed. This article reviews the formation of cartilage tissue, epithelium and neovascularization of tissue-engineered trachea, together with the obstacles, possible solutions and future. Furthermore, the role of the bioreactor for in vitro tracheal graft formation and recently reported clinical applications of tracheal graft were also discussed. Generally, although encouraging results have been achieved, however, some obstacles remain to be resolved before the tissue-engineered trachea can be widely used in clinical settings.

Bioengineering pediatric scaffold-free auricular cartilaginous constructs

OBJECTIVE

The use of exogenous materials as scaffolds in cartilage tissue engineering has limited the clinical application of resultant constructs due to the risk of postoperative complications. In an effort to minimize such complications, we aim to generate human, scaffold-free auricular cartilaginous constructs.

STUDY DESIGN

Laboratory study using pediatric auricular cartilage.

METHODS

Remnant, normal pediatric auricular cartilage samples that would have otherwise been discarded were collected and digested to free cells. Harvested cells were cultured and expanded in vitro for two passages and plated as micromass cultures. The culture medium was replaced with a chemically defined chondrogenic medium, and cellular monolayers surrounding micromass cultures were continuously scraped off. Constructs were allowed to mature for a period of 8 weeks.

RESULTS

Micromass constructs showed mechanical stability and structurally resembled native auricular tissue, with a perichondrium-like layer of cells surrounding the inner cartilaginous zone. Constructs accumulated equivalent sulphated glycosaminoglycan and 50% of collagen content compared to native auricular cartilage by mass, while displaying 156% more cellularity.

CONCLUSIONS

High-density micromass cultures of pediatric auricular chondrocytes can generate stable cartilaginous constructs following prolonged chondrogenic inductions in vitro. This technique is an essential step toward the development of three-dimensional constructs to recreate clinically applicable auricular cartilaginous constructs.

LEVEL OF EVIDENCE

NA. Laryngoscope, 127:E153-E158, 2017.

Scaffold-free cartilage tissue engineering with a small population of human nasoseptal chondrocytes

OBJECTIVE

Cartilage tissue engineering is a promising approach to provide suitable materials for nasal reconstruction; however, it typically requires large numbers of cells. We have previously shown that a small number of chondrocytes cultivated within a continuous flow bioreactor can elicit substantial tissue growth, but translation to human chondrocytes is not trivial. Here, we aimed to demonstrate the application of the bioreactor to generate large-sized tissues from a small population of primary human nasoseptal chondrocytes.

STUDY DESIGN

Experimental study.

METHODS

Chondrocytes were cultured in the bioreactor using different medium compositions, with varying amounts of serum and with or without growth factors. Resulting engineered tissues were analyzed for physical properties, biochemical composition, tissue microstructure, and protein localization.

RESULTS

Bioreactor-cultivated constructs grown with serum and growth factors (basic fibroblast growth factor and transforming growth factor beta 2) had greater thickness, as well as DNA and glycosaminoglycan (GAG) contents, compared to low serum and no growth factor controls. These constructs also showed the most intense proteoglycan and collagen II staining.

CONCLUSION

The combination of bioreactor conditions, serum, and growth factors allowed the generation of large, thick scaffold-free human cartilaginous tissues that resembled the native nasoseptal cartilage. There also may be implications for patient selection in future clinical applications of these engineered tissues because their GAG content decreased with donor age.

LEVEL OF EVIDENCE

NA. Laryngoscope, 127:E91-E99, 2017.

Clinical Translation of Tissue Engineered Trachea Grafts

OBJECTIVE

To provide a state-of-the-art review discussing recent achievements in tissue engineered tracheal reconstruction.

DATA SOURCES AND REVIEW METHODS

A structured PubMed search of the current literature up to and including October 2015. Representative articles that discuss the translation of tissue engineered tracheal grafts (TETG) were reviewed.

CONCLUSIONS

The integration of a biologically compatible support with autologous cells has resulted in successful regeneration of respiratory epithelium, cartilage, and vascularization with graft patency, although the optimal construct composition has yet to be defined. Segmental TETG constructs are more commonly complicated by stenosis and delayed epithelialization when compared to patch tracheoplasty.

IMPLICATIONS FOR PRACTICE

The recent history of human TETG recipients represents revolutionary proof of principle studies in regenerative medicine. Application of TETG remains limited to a compassionate use basis; however, defining the mechanisms of cartilage formation, epithelialization, and refinement of in vivo regeneration will advance the translation of TETG from the bench to the bedside.

Disparate response of articular- and auricular-derived chondrocytes to oxygen tension

PURPOSE/AIM

To determine the effect of reduced (5%) oxygen tension on chondrogenesis of auricular-derived chondrocytes. Currently, many cell and tissue culture experiments are performed at 20% oxygen with 5% carbon dioxide. Few cells in the body are subjected to this supra-physiological oxygen tension. Chondrocytes and their mesenchymal progenitors are widely reported to have greater chondrogenic expression when cultured at low, more physiological, oxygen tension (1-7%). Although generally accepted, there is still some controversy, and different culture methods, species, and outcome metrics cloud the field. These results are, however, articular chondrocyte biased and have not been reported for auricular-derived chondrocytes.

MATERIALS AND METHODS

Auricular and articular chondrocytes were isolated from skeletally mature New Zealand White rabbits, expanded in culture and differentiated in high density cultures with serum-free chondrogenic media. Cartilage tissue derived from aggregate cultures or from the tissue engineered sheets were assessed for biomechanical, glycosaminoglycan, collagen, collagen cross-links, and lysyl oxidase activity and expression.

RESULTS

Our studies show increased proliferation rates for both auricular and articular chondrocytes at low (5%) O2 versus standard (20%) O2. In our scaffold-free chondrogenic cultures, low O2 was found to increase articular chondrocyte accumulation of glycosaminoglycan, but not cross-linked type II collagen, or total collagen. Conversely, auricular chondrocytes accumulated less glycosaminoglycan, cross-linked type II collagen and total collagen under low oxygen tension.

CONCLUSIONS

This study highlights the dramatic difference in response to low O2 of chondrocytes isolated from different anatomical sites. Low O2 is beneficial for articular-derived chondrogenesis but detrimental for auricular-derived chondrogenesis.

Pediatric laryngotracheal reconstruction with tissue-engineered cartilage in a rabbit model

OBJECTIVES/HYPOTHESIS

To develop an effective rabbit model of in vitro- and in vivo-derived tissue-engineered cartilage for laryngotracheal reconstruction (LTR).

STUDY DESIGN

1) Determination of the optimal scaffold 1% hyaluronic acid (HA), 2% HA, and polyglycolic acid (PGA) and in vitro culture time course using a pilot study of 4 by 4-mm in vitro-derived constructs analyzed on a static culture versus zero-gravity bioreactor for 4, 8, and 12 weeks, with determination of compressive modulus and histology as outcome measures. 2) Three-stage survival rabbit experiment utilizing autologous auricular chondrocytes seeded in scaffolds, either 1% HA or PGA. The constructs were cultured for the determined in vitro time period and then cultured in vivo for 12 weeks. Fifteen LTRs were performed using HA cartilage constructs, and one was performed with a PGA construct. All remaining specimens and the final reconstructed larynx underwent mechanical testing, histology, and glycosaminoglycan (GAG) content determination, and then were compared to cricoid control specimens (n = 13) and control LTR using autologous thyroid cartilage (n = 18).

METHODS

1) One rabbit underwent an auricular punch biopsy, and its chondrocytes were isolated and expanded and then encapsulated in eight 4 by 4-mm discs of 1% HA, 2% HA, PGA either in rotary bioreactor or static culture for 4, 8, and 12 weeks, respectively, with determination of compressive modulus, GAG content, and histology. 2) Sixteen rabbits underwent ear punch biopsy; chondrocytes were isolated and expanded. The cells were seeded in 13 by 5 by 2.25-mm UV photopolymerized 1% HA (w/w) or calcium alginate encapsulated synthetic PGA (13 × 5 × 2 mm); the constructs were then incubated in vitro for 12 weeks (the optimal time period determined above in paragraph 1) on a shaker. One HA and one PGA construct from each animal was tested mechanically and histologically, and the remaining eight (4 HA and 4 PGA) were implanted in the neck. After 12 weeks in vivo, the most optimal-appearing HA construct was used as a graft for LTR in 15 rabbits and PGA in one rabbit. The seven remaining specimens underwent hematoxylin and eosin, Safranin O, GAG content determination, and flexural modulus testing. At 12 weeks postoperative, the animals were euthanized and underwent endoscopy. The larynges underwent mechanical and histological testing. All animals that died underwent postmortem examination, including gross and microhistological analysis of the reconstructed airway.

RESULTS

Thirteen of the 15 rabbits that underwent LTR with HA in vitro- and in vivo-derived tissue-engineered cartilage constructs survived. The 1% HA specimens had the highest modulus and GAG after 12 weeks in vitro. The HA constructs became well integrated in the airway, supported respiration for the 12 weeks, and were histologically and mechanically similar to autologous cartilage.

CONCLUSIONS

The engineering of in vitro- and in vivo-derived cartilage with HA is a novel approach for laryngotracheal reconstruction. The data suggests that the in vitro- and in vivo-derived tissue-engineered approaches may offer a promising alternative to current strategies used in pediatric airway reconstruction, as well as other head and neck applications.

LEVEL OF EVIDENCE

NA. Laryngoscope, 126:S5-S21, 2016.

Introducing a 3-dimensionally Printed, Tissue-Engineered Graft for Airway Reconstruction

Objective:

To use 3-dimensional (3D) printing and tissue engineering to create a graft for laryngotracheal reconstruction (LTR).

Study Design:

In vitro and in vivo pilot animal study.

Setting:

Large tertiary care academic medical center.

Subjects and Methods:

A 3D computer model of an anterior LTR graft was designed. That design was printed with polylactic acid on a commercially available 3D printer. The scaffolds were seeded with mature chondrocytes and collagen gel and cultured in vitro for up to 3 weeks. Scaffolds were evaluated in vitro for cell viability and proliferation. Anterior graft LTR was performed on 9 New Zealand white rabbits with the newly created scaffolds. Three animals were sacrificed at each time point (4, 8, and 12 weeks). The in vivo graft sites were assessed via bronchoscopy and histology.

Results:

The in vitro cell proliferation assay demonstrated initial viability of 87.5%. The cells proliferated during the study period, doubling over the first 7 days. Histology revealed that the cells retained their cartilaginous properties during the 21-day study period. In vivo testing showed that all animals survived for the duration of the study. Bronchoscopy revealed a well-mucosalized tracheal lumen with no evidence of scarring or granulation tissue. Histology indicated the presence of newly formed cartilage in the region where the graft was present.

Conclusions:

Our results indicate that it is possible to produce a custom-designed, 3D-printed, tissue-engineered graft for airway reconstruction.

Driving cartilage formation in high-density human adipose-derived stem cell aggregate and sheet constructs without exogenous growth factor delivery

An attractive cell source for cartilage tissue engineering, human adipose-derived stem cells (hASCs) can be easily expanded and signaled to differentiate into chondrocytes. This study explores the influence of growth factor distribution and release kinetics on cartilage formation within 3D hASC constructs incorporated with transforming growth factor-β1 (TGF-β1)-loaded gelatin microspheres. The amounts of microspheres, TGF-β1 concentration, and polymer degradation rate were varied within hASC aggregates. Microsphere and TGF-β1 loading concentrations were identified that resulted in glycosaminoglycan (GAG) production comparable to those of control aggregates cultured in TGF-β1-containing medium. Self-assembling hASC sheets were then engineered for the production of larger, more clinically relevant constructs. Chondrogenesis was observed in hASC-only sheets cultured with exogenous TGF-β1 at 3 weeks. Importantly, sheets with incorporated TGF-β1-loaded microspheres achieved GAG production similar to sheets treated with exogenous TGF-β1. Cartilage formation was confirmed histologically via observation of cartilage-like morphology and GAG staining. This is the first demonstration of the self-assembly of hASCs into high-density cell sheets capable of forming cartilage in the presence of exogenous TGF-β1 or with TGF-β1-releasing microspheres. Microsphere incorporation may bypass the need for extended in vitro culture, potentially enabling hASC sheets to be implanted more rapidly into defects to regenerate cartilage in vivo.

Engineered cartilaginous tubes for tracheal tissue replacement via self-assembly and fusion of human mesenchymal stem cell constructs

There is a critical need to engineer a neotrachea because currently there are no long-term treatments for tracheal stenoses affecting large portions of the airway. In this work, a modular tracheal tissue replacement strategy was developed. High-cell density, scaffold-free human mesenchymal stem cell-derived cartilaginous rings and tubes were successfully generated through employment of custom designed culture wells and a ring-to-tube assembly system. Furthermore, incorporation of transforming growth factor-β1-delivering gelatin microspheres into the engineered tissues enhanced chondrogenesis with regard to tissue size and matrix production and distribution in the ring- and tube-shaped constructs, as well as luminal rigidity of the tubes. Importantly, all engineered tissues had similar or improved biomechanical properties compared to rat tracheas, which suggests they could be transplanted into a small animal model for airway defects. The modular, bottom up approach used to grow stem cell-based cartilaginous tubes in this report is a promising platform to engineer complex organs (e.g., trachea), with control over tissue size and geometry, and has the potential to be used to generate autologous tissue implants for human clinical applications.

Construction of tissue-engineered laryngeal cartilage with a hollow, semi-flared shape using poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) as a scaffold

The aim of the present study was to construct tissue-engineered laryngeal cartilage with a hollow, semi-flared shape using a poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHH) scaffold. Porous PHBHH was prepared and formed into a hollow, semi-flared shape, and the cell-material composites were cultured for one week in vitro prior to implantation in vivo. Cells of the nine rabbits of the experimental group were filled and encapsulated in the myofascial flap-shaping material composite for in situ implantation. The three rabbits in the control group were treated with the shaping material without the chondrocytes. Cartilage regeneration was assessed at six, 12 and 18 weeks after surgery. In the experimental group, the shape and porosity of the material were ideal, the cells exhibited good adhesion with the material and the myofascial flap blood supply was rich. The engineered laryngeal cartilage with the hollow, semi-flared shape was ideally formed, and the cartilage formed at six weeks after the surgery. Further maturation of the cartilage was observed at 12 and 18 weeks after the surgery. PHBHH was a suitable material for the formation of a hollow, semi-flared shape with good cellular compatibility. Myofascial flap filling and wrapping can be used to build tissue-engineered laryngeal cartilage with a hollow, semi-flared shape.

Tissue engineered scaffolds for an effective healing and regeneration: reviewing orthotopic studies

It is commonly stated that tissue engineering is the most promising approach to treat or replace failing tissues/organs. For this aim, a specific strategy should be planned including proper selection of biomaterials, fabrication techniques, cell lines, and signaling cues. A great effort has been pursued to develop suitable scaffolds for the restoration of a variety of tissues and a huge number of protocols ranging from in vitro to in vivo studies, the latter further differentiating into several procedures depending on the type of implantation (i.e., subcutaneous or orthotopic) and the model adopted (i.e., animal or human), have been developed. All together, the published reports demonstrate that the proposed tissue engineering approaches spread toward multiple directions. The critical review of this scenario might suggest, at the same time, that a limited number of studies gave a real improvement to the field, especially referring to in vivo investigations. In this regard, the present paper aims to review the results of in vivo tissue engineering experimentations, focusing on the role of the scaffold and its specificity with respect to the tissue to be regenerated, in order to verify whether an extracellular matrix-like device, as usually stated, could promote an expected positive outcome.

Scaffold-free cartilage subjected to frictional shear stress demonstrates damage by cracking and surface peeling

Scaffold-free engineered cartilage is being explored as a treatment for osteoarthritis. In this study, frictional shear stress was applied to determine the friction and damage behaviour of scaffold-free engineered cartilage, and tissue composition was investigated as it related to damage. Scaffold-free engineered cartilage frictional shear stress was found to exhibit a time-varying response similar to that of native cartilage. However, damage occurred that was not seen in native cartilage, manifesting primarily as tearing through the central plane of the constructs. In engineered cartilage, cells occupied a significantly larger portion of the tissue in the central region where damage was most prominent (18 ± 3% of tissue was comprised of cells in the central region vs 5 ± 1% in the peripheral region; p < 0.0001). In native cartilage, cells comprised 1-4% of tissue for all regions. Average bulk cellularity of engineered cartilage was also greater (68 × 10³  ± 4 × 10³ vs 52 × 10³  ± 22 × 10³ cells/mg), although this difference was not significant. Bulk tissue comparisons showed significant differences between engineered and native cartilage in hydroxyproline content (8 ± 2 vs 45 ± 3 µg HYP/mg dry weight), solid content (12.5 ± 0.4% vs 17.9 ± 1.2%), shear modulus (0.06 ± 0.02 vs 0.15 ± 0.07 MPa) and aggregate modulus (0.12 ± 0.03 vs 0.32 ± 0.14 MPa), respectively. These data indicate that enhanced collagen content and more uniform extracellular matrix distribution are necessary to reduce damage susceptibility. Copyright © 2014 John Wiley & Sons, Ltd.

Demonstration of the role of an implantable bioscaffold in airway reconstruction: a pilot study utilizing an animal model

INTRODUCTION

Laryngotracheal reconstruction is a common procedure to repair subglottic stenosis. Despite a success rate upwards of 85%, this procedure has significant morbidity associated with it, specifically with the site of the graft harvest and recurrence of stenosis. We propose that a recently described cellular bioscaffold xenograft may be useful in reducing these complications.

METHODS AND MATERIALS

10 Sprague Dawley rats were divided into 2 groups of 5. One group underwent incision through the cricoid and the first two tracheal rings followed by primary closure (G1); the second group underwent incision through the cricoid and the first two tracheal rings followed by placement of the xenograft (G2); additionally, a specimen was harvested from an animal which did not undergo any surgical procedure to compare to the two surgical groups. Specimen harvest occurred on post-operative days 1, 7, 14, 21, and 28.

RESULTS

6 of 10 animals provided usable data. All animals receiving the xenograft survived until the time of specimen harvest. Only 1 animal undergoing primary closure survived beyond post-operative day one. On histology review, the xenograft animals showed a progressive decrease in fibrosis relative to the animals that underwent primary closure. On POD 28, restoration of the respiratory epithelium and intact basement membrane was noted in the xenograft group.

CONCLUSION

We believe that this pilot study shows the potential of utilizing bio-implantable biomaterials, specifically a cellular bioscaffold which encourages the ingrowth of native tissue instead of fibrosis. Histologic analysis shows that use of the xenograft can initiate the proliferation of native tissues decreasing the amount of fibrosis present post-operatively, although significant further analysis is needed before definitively concluding that this approach is superior to utilization of a graft.

Cell sources for trachea tissue engineering: past, present and future

Trachea tissue engineering has been one of the most promising approaches to providing a potential clinical application for the treatment of long-segment tracheal stenosis. The sources of the cells are particularly important as the primary factor for tissue engineering. The use of appropriate cells seeded onto scaffolds holds huge promise as a means of engineering the trachea. Furthermore, appropriate cells would accelerate the regeneration of the tissue even without scaffolds. Besides autologous mature cells, various stem cells, including bone marrow-derived mesenchymal stem cells, adipose tissue-derived stem cells, umbilical cord blood-derived mesenchymal stem cells, amniotic fluid stem cells, embryonic stem cells and induced pluripotent stem cells, have received extensive attention in the field of trachea tissue engineering. Therefore, this article reviews the progress on different cell sources for engineering tracheal cartilage and epithelium, which can lead to a better selection and strategy for engineering the trachea.

Methods for producing scaffold-free engineered cartilage sheets from auricular and articular chondrocyte cell sources and attachment to porous tantalum

Scaffold-free cartilage engineering techniques may provide a simple alternative to traditional methods employing scaffolds. We previously reported auricular chondrocyte-derived constructs for use in an engineered trachea model; however, the construct generation methods were not reported in detail. In this study, methods for cartilage construct generation from auricular and articular cell sources are described in detail, and the resulting constructs are compared for use in a joint resurfacing model. Attachment of cartilage sheets to porous tantalum is also investigated as a potential vehicle for future attachment to subchondral bone. Large scaffold-free cartilage constructs were produced from culture-expanded chondrocytes from skeletally mature rabbits, and redifferentiated in a chemically-defined culture medium. Auricular constructs contained more glycosaminoglycan (39.6±12.7 vs. 9.7±1.9 μg/mg wet weight, mean and standard deviation) and collagen (2.7±0.45 vs. 1.1±0.2 μg/mg wet weight, mean and standard deviation) than articular constructs. Aggregate modulus was also higher for auricular constructs vs. articular constructs (0.23±0.07 vs. 0.12±0.03 MPa, mean and standard deviation). Attachment of constructs to porous tantalum was achieved by neocartilage ingrowth into tantalum pores. These results demonstrate that large scaffold-free neocartilage constructs can be produced from mature culture-expanded chondrocytes in a chemically-defined medium, and that these constructs can be attached to porous tantalum.

Optimization of the Expansion and Differentiation of Rabbit Chondrocytes In Vitro

OBJECTIVE

To develop a tissue culture expansion method for rabbit chondrocytes that promotes robust expansion while preserving chondrogenic potential.

DESIGN

Rabbit chondrocytes isolated from articular or auricular chondrocytes were assessed for chondrogenic differentiation potential versus population doubling using different expansion and differentiation conditions. Expansion conditions included serum alone, serum plus basic fibroblast growth factor 2 (FGF-2), and serum plus insulin-like growth factor 1 (IGF-1) and FGF-2. Differentiation conditions consisted of defined medium with and without bone morphogenetic protein 2 (BMP-2).

RESULTS

Nonsupplemented chondrocytes showed limited expandability, whereas supplementation with FGF-2 allowed articular chondrocytes to be expanded past 10 population doublings (PDs) and allowed auricular chondrocytes to expand past 15 population doublings. Differentiation, as measured by glycosaminoglycan production in aggregate cultures, was minimal in articular chondrocytes without BMP-2 supplementation and diminished to less than 50% maximal in auricular chondrocytes by PD 20. However, when FGF-2 was used during expansion and BMP-2 used during differentiation, both articular and auricular chondrocytes retained greater than 50% maximal differentiation for more than 25 PDs. The addition of IGF-1 to FGF-2 during expansion decreased chondrogenicity of auricular chondrocytes exposed to BMP-2, whereas for articular chondrocytes, chondrogenic expression increased.

CONCLUSION

These results demonstrate that FGF-2, for expansion, and BMP-2, for differentiation, dramatically increase the functional expansion of auricular and articular chondrocytes and provide a methodology to expand sufficient numbers of chondrocytes for tissue engineering applications.

What can regenerative medicine offer for infants with laryngotracheal agenesis?

BACKGROUND

Laryngotracheal agenesis is a rare congenital disorder but has devastating consequences. Recent achievements in regenerative medicine have opened up new vistas in therapeutic strategies for these infants.

OBJECTIVE

To provide a state-of-the-art review concerning recent achievements in tissue engineering as applied to fetal airway reconstruction and to discuss the use of autologous human amniotic stem cells to prepare organs in advance for babies with laryngotracheal agenesis.

DATA SOURCES AND REVIEW METHODS

A structured search of the current literature (up to and including June 2011). The authors searched PubMed, EMBASE, CINAHL, Web of Science, BIOSIS Previews, Cambridge Scientific Abstracts, ICTRP, and additional sources for published and unpublished trials.

RESULTS

Over the past 15 years, progress has been made in advancing the boundaries of regenerative medicine from the laboratory to the clinical setting through translational research. Most experience has been gained with adult stem cells and synthetic materials or decellularized scaffolds. The optimal cell source for fetal tissue engineering remains to be determined, but a combination of decellularized scaffolds and amniotic fluid stem cells holds great promise for fetal tissue engineering.

CONCLUSIONS AND IMPLICATIONS FOR PRACTICE

Current treatment strategies for laryngotracheal agenesis are suboptimal, and fetal tissue engineering offers an alternative to conventional treatments. Use of human amniotic fluid stem cells for preparing autologous tissue-engineered organ constructs prenatally is an attractive concept. Although this approach is still in its experimental stages, further preclinical and clinical studies are encouraged to define its exact role in the pediatric laryngological setting.

Endogenous and exogenous stem cells: a role in lung repair and use in airway tissue engineering and transplantation

Rapid repair of the denuded alveolar surface after injury is a key to survival. The respiratory tract contains several sources of endogenous adult stem cells residing within the basal layer of the upper airways, within or near pulmonary neuroendocrine cell rests, at the bronchoalveolar junction, and within the alveolar epithelial surface, which contribute to the repair of the airway wall. Bone marrow-derived adult mesenchymal stem cells circulating in blood are also involved in tracheal regeneration. However, an organism is frequently incapable of repairing serious damage and defects of the respiratory tract resulting from acute trauma, lung cancers, and chronic pulmonary and airway diseases. Therefore, replacement of the tracheal tissue should be urgently considered. The shortage of donor trachea remains a major obstacle in tracheal transplantation. However, implementation of tissue engineering and stem cell therapy-based approaches helps to successfully solve this problem. To date, huge progress has been achieved in tracheal bioengineering. Several sources of stem cells have been used for transplantation and airway reconstitution in animal models with experimentally induced tracheal defects. Most tracheal tissue engineering approaches use biodegradable three-dimensional scaffolds, which are important for neotracheal formation by promoting cell attachment, cell redifferentiation, and production of the extracellular matrix. The advances in tracheal bioengineering recently resulted in successful transplantation of the world's first bioengineered trachea. Current trends in tracheal transplantation include the use of autologous cells, development of bioactive cell-free scaffolds capable of supporting activation and differentiation of host stem cells on the site of injury, with a future perspective of using human native sites as micro-niche for potentiation of the human body's site-specific response by sequential adding, boosting, permissive, and recruitment impulses.