pH-switchable self-assembled materials

Exerting pulling forces in fluids by directional disassembly of microcrystalline fibres

Biomolecular polymerization motors are biochemical systems that use supramolecular (de-)polymerization to convert chemical potential into useful mechanical work. With the intent to explore new chemomechanical transduction strategies, here we show a synthetic molecular system that can generate forces via the controlled disassembly of self-organized molecules in a crystal lattice, as they are freely suspended in a fluid. An amphiphilic monomer self-assembles into rigid, high-aspect-ratio microcrystalline fibres. The assembly process is regulated by a coumarin-based pH switching motif. The microfibre crystal morphology determines the monomer reactivity at the interface, resulting in anisotropic etching. This effect exerts a directional pulling force on microscopic beads adsorbed on the crystal surface through weak multivalent interactions. We use optical-tweezers-based force spectroscopy to extract mechanistic insights into this process, quantifying a stall force of 2.3 pN (±0.1 pN) exerted by the ratcheting mechanism produced by the disassembly of the microfibres.

CO2 induced phase transition on a self-standing droplet studied by X-ray scattering and magnetic resonance

HYPOTHESIS

Acoustic levitation is a suitable approach for studying processes occurring at the gas-liquid interfaces, as it allows its investigation in a contact-free manner while providing control over the gas phase. Here, we hypothesize that phase transitions induced by a CO2 rich atmosphere can be examined, at different length scales, in a contact-free manner.

EXPERIMENTAL

A system consisting of 12-hydroxysteric acid (HSA) soaps mixed with different ratios of monoethanolamine (MEA) and choline hydroxide, was prepared. Microliter droplets of the samples were acoustically levitated and monitored with a camera, while exposed to CO2 to modify the pH through diffusion at the air-liquid interface and inside the droplet. The phase transition and water mobility in the levitated droplets were evaluated through X-ray scattering (SAXS/WAXS) and magnetic resonance studies, in real-time. Finally, the droplets were collected and examined under the microscope.

FINDINGS

The introduction of CO2 gas induced a phase transition from micelles to multi-lamellar tubes, resulting in a gel-like behavior both in the bulk and at the interface. The high stability of the acoustic levitator allowed the investigation of this dynamic phenomenon, in real-time, in a contact-free environment. This study showcases the suitability of acoustic levitation as a tool to investigate complex chemical processes at interfaces.

Berberine and chlorogenic acid-assembled nanoparticles for highly efficient inhibition of multidrug-resistant Staphylococcus aureus

Due to the bacteria resistant to various first-line antibiotics, it is urgent to develop efficient antibiotic alternatives and formulate multidimensional strategies. Herein, supramolecular Chinese medicine nanoparticles are synthesized by self-assembly of berberine (BBR) and chlorogenic acid (CGA), which exhibit higher inhibitory effect against Staphylococcus aureus and multidrug-resistant Staphylococcus aureus (MRSA) than ampicillin, oxacillin, BBR, CGA, as well as mixture of BBR and CGA (minimum inhibitory concentration, MIC = 1.5 µM). The inhibition by BBR/CGA nanoparticles (2.5 µM) reaches 99.06 % for MRSA, which is significantly higher than ampicillin (29.03 %). The nanoparticles with 1/2 MIC can also synergistically restore the antimicrobial activity of ampicillin against MRSA. Moreover, in vivo therapeutic outcome in the murine skin wound infection model suggests that the nanoparticles are able to promote wound healing. This study provides new insights in the application of Chinese medicines self-assembly for MRSA inhibition, as well as solutions for potential persistent clinical infections and drug deficiencies.

Supramolecular Assembly and Thermogelation Strategies Using Peptide-Polymer Conjugates

Peptide-polymer conjugates (PPCs) are of particular interest in the development of responsive, adaptive, and interactive materials due to the benefits offered by combining both building blocks and components. This review presents pioneering work as well as recent advances in the design of peptide-polymer conjugates, with a specific focus on their thermoresponsive behavior. This unique class of materials has shown great promise in the development of supramolecular structures with physicochemical properties that are modulated using soft and biorthogonal external stimuli. The temperature-induced self-assembly of PPCs into various supramolecular architectures, gelation processes, and tuning of accessible processing parameters to biologically relevant temperature windows are described. The discussion covers the chemical design of the conjugates, the supramolecular driving forces involved, and the mutual influence of the polymer and peptide segments. Additionally, some selected examples for potential biomedical applications of thermoresponsive PPCs in tissue engineering, delivery systems, tumor therapy, and biosensing are highlighted, as well as perspectives on future challenges.

pH-Controlled Reversible Folding of Copolymers via Formation of β-sheet Secondary Structures

Protein functions are enabled by their perfectly arranged 3D structure, which is the result of a hierarchical intramolecular folding process. Sequence-defined polypeptide chains form locally ordered secondary structures (i.e., α-helix and β-sheet) through hydrogen bonding between the backbone amides, shaping the overall tertiary structure. To generate similarly complex macromolecular architectures based on synthetic materials, a plethora of strategies have been developed to induce and control the folding of synthetic polymers. However, the degree of complexity of the structure-driving ensemble of interactions demonstrated by natural polymers is unreached, as synthesizing long sequence-defined polymers with functional backbones remains a challenge. Herein, we report the synthesis of hybrid peptide-N,N-Dimethylacrylamide copolymers via radical Ring-Opening Polymerization (rROP) of peptide containing macrocycles. The resulting synthetic polymers contain sequence-defined regions of β-sheet encoding amino acid sequences. Exploiting the pH responsiveness of the embedded sequences, protonation or deprotonation in water induces self-assembly of the peptide strands at an intramacromolecular level, driving polymer chain folding via formation of β-sheet secondary structures. We demonstrate that the folding behavior is sequence dependent and reversible.

Impact of sample history and solvent effects on pathway control in the supramolecular polymerisation of Au(i)-metallopeptide amphiphiles

We investigate the kinetics of the supramolecular polymerisation of an Au(i)-metallopeptide amphiphile that assembles into exceptionally long and rigid nanofibers. We developed a precise preparation protocol to measure the concentration dependent assembly kinetics which elucidated a nucleation-elongation dominated supramolecular polymerisation process. We show striking differences in the assembly behavior and morphology in aqueous media, even at organic solvent contents as low as 1 vol%, compared to pure buffer.

Control of the stepwise self-assembly process of a pH-responsive amphiphilic 4-aminoquinoline-tetraphenylethene conjugate

Controlling the kinetic processes of self-assembly and switching their kinetic properties according to the changes in external environments are crucial concepts in the field of supramolecular polymers in water for biological and biomedical applications. Here we report a new self-assembling amphiphilic 4-aminoquinoline (4-AQ)-tetraphenylethene (TPE) conjugate that exhibits kinetically controllable stepwise self-assembly and has the ability of switching its kinetic nature in response to pH. The self-assembly process of the 4-AQ amphiphile comprises the formation of sphere-like nanoparticles, a transition to short nanofibers, and their growth to long nanofibers with ∼1 μm length scale at room temperature (RT). The timescale of the self-assembly process differs according to the pH-responsivity of the 4-AQ moiety in a weakly acidic to neutral pH range. Therefore, after aging for 24 h at RT, the 4-AQ amphiphile forms metastable short nanofibers at pH 5.5, while it forms thermodynamically favored long nanofibers at pH 7.4. Moreover, the modulation of nanofiber growth proceeding spontaneously at RT was achieved by switching the kinetic pathway through changing the pH between 7.4 and 5.5.

Self-assembly of a peptide sequence, EKKE, composed of exclusively charged amino acids: Role of charge in morphology and lead binding

The self-assembly of peptides is influenced by their amino acid sequence and other factors including pH, charge, temperature, and solvent. Herein, we explore whether a four-residue sequence, EKKE, consisting of exclusively charged amino acids shows the propensity to form self-assembled ordered nanostructures and whether the overall charge plays any role in morphological and functional properties. From a combination of experimental data provided by Thioflavin T fluorescence, Congo red absorbance, circular dichroism spectroscopy, dynamic light scattering, field emission-scanning electron microscopy, atomic force microscopy, and confocal microscopy, it is clear that the all-polar peptide and charged EKKE sequence shows a pH-dependent tendency to form amyloid-like structures, and the self-assembled entities under acidic, basic and neutral conditions exhibit morphological variation. Additionally, the ability of the self-assembled amyloid nanostructures to bind to the toxic metal, lead (Pb²⁺ ), was demonstrated from the analysis of the ultraviolet absorbance and X-ray photoelectron spectroscopy data. The modulation at the sequence level for the amyloid-forming EKKE scaffold can further extend its potential role not only in the remediation of other toxic metals but also towards biomedical applications.

Antibacterial hydrogels of aromatic tripeptides

Self-assembled peptide hydrogels have emerged as alternatives to the conventional approaches employed in controlled drug release, wound-healing, and drug delivery, and as anti-infective agents. However, peptide hydrogels possessing antibacterial properties are less explored. In this work, we have designed three ultrashort antibacterial peptide hydrogels: Fmoc-FFH-CONH₂, Fmoc-FHF-CONH₂, and Fmoc-HFF-CONH₂. The rheological study showed the higher storage modulus of Fmoc-FFH-CONH₂ (30.43 kPa) compared to Fmoc-FHF-CONH₂ and Fmoc-HFF-CONH₂, which may be attributed to the enhanced aromatic interaction in Fmoc-FFH-CONH₂ compared to the other two variants, resulting in more mechanical rigidity. Further, the prepared hydrogels were evaluated for their inherent antibacterial potency against Gram-positive (Staphylococcus aureus, strain MTCC 96) and Gram-negative (Pseudomonas aeruginosa, strain PA01) bacteria. Antibacterial experiments demonstrated the potency of the hydrogels in the order of Fmoc-FFH-CONH₂ > Fmoc-FHF-CONH₂ > Fmoc-HFF-CONH₂. The antibacterial effect of the hydrogels was predominantly due to the osmotic stress and membrane disruption, which was verified by reactive oxygen species (ROS) generation and outer membrane permeabilization assays. Our findings point to the scope of using the synthesized peptide hydrogels as agents for topical applications.

Supramolecular Vector/Drug Coassemblies of Polyglycerol Dendrons and Rutin Enhance the pH Response

A coassembly strategy for a supramolecular vector/drug was proposed with a biocompatible ternary dodecyl-bi(third-generation polyglycerol (PG) dendrons) (C₁₂-(G3)₂) amphiphile, dodecyl sulfobetaine (SB3-12) surfactant, and poorly water-soluble drug rutin. C₁₂-(G3)₂ and rutin will mutually enhance their pH response by protonation and deprotonation of dendritic PG and rutin's ionization as the pH changes from the acidic gastric lumen to the weakly alkaline intestine. SB3-12 may increase the payload and bring about sustained release for rutin by intermolecular interactions. Self-assembling behaviors of C₁₂-(G3)₂, SB3-12, sodium dodecyl sulfate (SDS), and dodecyl trimethylammonium bromide (DTAB) and their hybrids with rutin were characterized by UV-vis spectroscopy, a fluorescence probe, and ¹H NMR. UV-vis and ¹H NMR were used to identify the position and orientation of rutin in the vectors. The functions of the vector/drug were confirmed by measuring the solubility and in vitro release of rutin. The ternary coassembling vector/drug easily imparted functions of pH-responsive and sustained release without complex synthetic processes. The nanocaves framed by PG dendrons in the micelles provide pH-responsive compartments for rutin and SB3-12 in the supramolecular vector/drug anchors that accommodate rutin by weak interactions. The finely matched supramolecular vector/drug coassemblies exhibit the pH-responsive function for a potential application in the treatment of inflammatory bowel disease.

Drug Delivery Strategies and Biomedical Significance of Hydrogels: Translational Considerations

Hydrogels are a promising and attractive option as polymeric gel networks, which have immensely fascinated researchers across the globe because of their outstanding characteristics such as elevated swellability, the permeability of oxygen at a high rate, good biocompatibility, easy loading, and drug release. Hydrogels have been extensively used for several purposes in the biomedical sector using versatile polymers of synthetic and natural origin. This review focuses on functional polymeric materials for the fabrication of hydrogels, evaluation of different parameters of biocompatibility and stability, and their application as carriers for drugs delivery, tissue engineering and other therapeutic purposes. The outcome of various studies on the use of hydrogels in different segments and how they have been appropriately altered in numerous ways to attain the desired targeted delivery of therapeutic agents is summarized. Patents and clinical trials conducted on hydrogel-based products, along with scale-up translation, are also mentioned in detail. Finally, the potential of the hydrogel in the biomedical sector is discussed, along with its further possibilities for improvement for the development of sophisticated smart hydrogels with pivotal biomedical functions.

Bioinspired tunable hydrogels: An update on methods of preparation, classification, and biomedical and therapeutic applications

Hydrogels exhibit water-insoluble three-dimensional polymeric networks capable of absorbing large amounts of biological fluids. Both natural and synthetic polymers are used for the preparation of hydrogel networks. Such polymeric networks are fabricated through chemical or physical mechanisms of crosslinking. Chemical crosslinking is accomplished mainly through covalent bonding, while physical crosslinking involves self-healing secondary forces like H-bonding, host-guest interactions, and antigen-antibody interactions. The building blocks of the hydrogels play an important role in determining the mechanical, biological, and physicochemical properties. Hydrogels are used in a variety of biomedical applications like diagnostics (biodetection and bioimaging), delivery of therapeutics (drugs, immunotherapeutics, and vaccines), wound dressing and skin materials, cardiac complications, contact lenses, tissue engineering, and cell culture because of the inherent characteristics like enhanced water uptake and structural similarity with the extracellular matrix (ECM). This review highlights the recent trends and advances in the roles of hydrogels in biomedical and therapeutic applications. We also discuss the classification and methods of hydrogels preparation. A brief outlook on the future directions of hydrogels is also presented.

A mini-review on peptide-based self-assemblies and their biological applications

Peptide-based supramolecular self-assembly from peptide monomers into well-organized nanostructures, has attracted extensive attentions towards biomedical and biotechnological applications in recent decades. This spontaneous and reversible assembly process involving non-covalent bonding interactions can be artificially regulated. In this review, we have elaborated different strategies to modulate the peptide self-assembly through tuning the physicochemical and environmental conditions, includingpH, light, temperature, solvent, and enzyme. Detailed introduction of biological applications and future potential of the peptide-based nano-assemblies will also be given.

Formation of pH-Responsive Supramolecular Hydrogels in Basic Buffers: Self-assembly of Amphiphilic Tris-Urea

An amphiphilic tris-urea compound (1) containing hydrophilic resorcinol units was designed and synthesized. Compound 1 formed supramolecular hydrogels in basic buffers, such as glycine-NaOH, phosphate-NaOH, 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES)-NaOH, and borate-NaOH. The optimum pH range of the buffer solution for gelation was 10-11 and insoluble suspensions or solutions were formed when the pH was outside this range. When the borate-NaOH buffer was used, supramolecular hydrogels were formed over a wide pH range (7.5-11.0). The thermal stabilities and viscoelastic properties of the supramolecular hydrogels were determined from the gel-to-sol phase transition temperatures and rheological properties, respectively. The supramolecular hydrogel formed from compound 1 and the borate-NaOH buffer exhibited a pH-responsive reversible gel-to-sol phase transition property. Gel-to-sol phase transition could be achieved by adding NaOH and regelation of the sol was realized by adding an appropriate amount of boric acid. Increasing the amount of the acid resulted in a gel-to-sol phase transition.

Construction of a pH-sensitive self-assembly in aqueous solutions based on a dansyl-modified β-cyclodextrin

Here we present a pH-responsive self-assembly based on a β-cyclodextrin (β-CD) derivative bearing a dansyl terminus (βCD-C₆-Dns). Vesicular structures were formed over the entire studied pH range (8.5-0.7); however, the molecular configuration and packing within the vesicles were different at different pH values. Intramolecular host-guest complexation occurred mainly between the dansyl group and β-CD at pH values where the dansyl group was not protonated. The alkyl chain also acted as a competitive guest to form host-guest inclusions as confirmed by 2D ¹H NMR measurements. The pH-responsive βCD-C₆-Dns vesicles have potential application prospects in pH-controlled drug release based on the low cytotoxicity of βCD-C₆-Dns.

Water-Soluble Supramolecular Polymers of Paired and Stacked Heterocycles: Assembly, Structure, Properties, and a Possible Path to Pre-RNA

The hypothesis that RNA and DNA are products of chemical and biological evolution has motivated our search for alternative nucleic acids that may have come earlier in the emergence of life-polymers that possess a proclivity for covalent and non-covalent self-assembly not exhibited by RNA. Our investigations have revealed a small set of candidate ancestral nucleobases that self-assemble into hexameric rosettes that stack in water to form long, twisted, rigid supramolecular polymers. These structures exhibit properties that provide robust solutions to long-standing problems that have stymied the search for a prebiotic synthesis of nucleic acids. Moreover, their examination by experimental and computational methods provides insight into the chemical and physical principles that govern a particular class of water-soluble one-dimensional supramolecular polymers. In addition to efficient self-assembly, their lengths and polydispersity are modulated by a wide variety of positively charged, planar compounds; their assembly and disassembly are controlled over an exceedingly narrow pH range; they exhibit spontaneous breaking of symmetry; and homochirality emerges through non-covalent cross-linking during hydrogel formation. Some of these candidate ancestral nucleobases spontaneously form glycosidic bonds with ribose and other sugars, and, most significantly, functionalized forms of these heterocycles form supramolecular structures and covalent polymers under plausibly prebiotic conditions. This Perspective recounts a journey of discovery that continues to reveal attractive answers to questions concerning the origins of life and to uncover the principles that control the structure and properties of water-soluble supramolecular polymers.

De novo design of a pH-triggered self-assembled β-hairpin nanopeptide with the dual biological functions for antibacterial and entrapment

BACKGROUND

Acid-tolerant enteric pathogens can evade small intestinal acid barriers, colonize and infect the intestinal tract. However, broad-spectrum antibiotics are not the best therapeutic strategy because of the disruption of intestinal flora caused by its indiscriminate antimicrobial activity against beneficial and harmful bacteria. So that is what inspired us to combine pH regulation with nanotechnology to develop a pH-triggered site-targeted antimicrobial peptide with entrapping function.

RESULTS

A pH-triggered dual biological functional self-assembled peptide (SAP) was designed according to the features of amino-acid building blocks and the diagonal cation-π interaction principle. The results of characterization experiments showed that changes in pH conditions could trigger microstructural transformation of the nanopeptide from nanospheres to nanofibers. The subsequent antibacterial and toxicity experiments determined that SAP had great antimicrobial activity against Escherichia coli, Salmonella typhimurium, Listeria monocytogenes, and Bacillus cereus above 15.6 μg/mL under acidic conditions by disrupting bacterial membrane integrity, excellent biocompatibility in vitro even at 250 μg/mL and high tolerance in physical environment. Moreover, at peptide concentrations greater than 62.5 μg/mL, SAP showed the entrapment property, which played an important role in phagocytic clearance in infection forces. Meanwhile, the in vivo results revealed that SAP possessed excellent therapeutic effect and good biosafety.

CONCLUSIONS

Our study revealed the antibacterial activity of a short β-hairpin forming self-assembled peptide, and established an innovative design strategy for peptide-based nanomaterials and a new treatment strategy for gastrointestinal bacterial infections.

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications

This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.

Annealing Supramolecular Gels by a Reaction Relay

Supramolecular gels have potential in many areas. In many cases, a major drawback is that the gels are formed at a high rate. As a result, nonoptimal, kinetically trapped self-assembled structures are often formed, leading to gels that can be hard to reproduce and control. One method to get around kinetic trapping is annealing. Thermal annealing is one possibility, but it is not always desirable to heat the gels. Here, we describe a method to anneal pH-triggered gels after they are formed. We employ a reaction relay in a peptide-based hydrogel system to anneal the structures by a controlled and uniform pH change. Our method allows us to prepare gels with more controlled properties. We show that this can be used to enable homogeneous "molding and casting" of the hydrogels. This method of annealing is more effective in improving gel robustness than a conventional heat-cool cycle.

Transient supramolecular assembly of a functional perylene diimide controlled by a programmable pH cycle

Self-regulating materials require embedded control systems. Active networks of enzymes fulfill this function in living organisms, and the development of chemical controls for synthetic systems is still in its infancy. While previous work has focused on enzymatic controls, small-molecule networks have unexplored potential. We describe a simple small-molecule network that is able to produce transient pH cycles with tunable lagtimes and lifetimes, based on coupling the acid-to-alkali methylene glycol-sulfite reaction to 1,3-propanesultone, a slow acid generator. Applied to transient pH-driven supramolecular self-assembly of a perylene diimide, our system matches the flexibility of in vitro enzymatic systems, including the ability to perform repeated cycles of assembly and disassembly.

pH-Responsive Side Chains as a Tool to Control Aqueous Self-Assembly Mechanisms

pH-Tunable nanoscale morphology and self-assembly mechanism of a series of oligo(p-phenyleneethynylene) (OPE)-based bolaamphiphiles featuring poly(ethylene imine) (PEI) side chains of different length and degree of hydrolysis are described. Protonation and deprotonation of the PEI chains by changing the pH alters the hydrophilic/hydrophobic balance of the systems and, in turn, the strength of intermolecular interactions between the hydrophobic OPE moieties. Low pH values (3) lead to weak interaction between the OPEs and result in spherical nanoparticles, in which aggregation follows an isodesmic mechanism. In contrast, higher pH values (11) induce deprotonation of the polymer chains and lead to a stronger, cooperative aggregation into anisotropic nanostructures. Our results demonstrate that pH-responsive chains can be exploited as a tool to tune self-assembly mechanisms, which opens exciting possibilities to develop new stimuli-responsive materials.

Enzyme-Instructed Self-Assembly (EISA) and Hydrogelation of Peptides

Self-assembly is a powerful tool for constructing supramolecular materials for many applications, ranging from energy harvesting to biomedicine. Among the methods to prepare supramolecular materials for biomedical applications, enzyme-instructed self-assembly (EISA) has several advantages. Herein, the unique properties and advantages of EISA in preparing biofunctional supramolecular nanomaterials and hydrogels from peptides are highlighted. EISA can trigger molecular self-assembly in situ. Therefore, using overexpression enzymes in disease sites, supramolecular materials can be formed in situ to improve the selectivity and efficacy of the treatment. The precursor may be involved during the EISA process, and it is actually a two-component self-assembly process. The precursor can help to stabilize the assembled nanostructures of hydrophobic peptides formed by EISA. More importantly, the precursor may determine the outcome of molecular self-assembly. Recently, it was also observed that EISA can kinetically control the peptide folding and morphology and cellular uptake behavior of supramolecular nanomaterials. With the combination of other methods to trigger molecular self-assembly, researchers can form supramolecular nanomaterials in a more precise mode and sometimes under spatiotemporal control. EISA is a powerful and unique methodology to prepare supramolecular biofunctional materials that cannot be generated from other common methods.

Controlled binding of organic guests by stimuli-responsive macrocycles

Synthetic supramolecular chemistry pursues not only the construction of new matter, but also control over its inherently dynamic behaviour.

Advances in crosslinking strategies of biomedical hydrogels

Biomedical hydrogels as sole repair matrices or combined with pre-seeded cells and bioactive growth factors are extensively applied in tissue engineering and regenerative medicine. Hydrogels normally provide three dimensional structures for cell adhesion and proliferation or the controlled release of the loading of drugs or proteins. Various physiochemical properties of hydrogels endow them with distinct applications. In this review, we present the commonly used crosslinking method for hydrogel synthesis involving physical and chemical crosslinks and summarize their current progress and future perspectives.

Light-Responsive Arylazopyrazole Gelators: From Organic to Aqueous Media and from Supramolecular to Dynamic Covalent Chemistry

Versatile photoresponsive gels based on tripodal low molecular weight gelators (LMWGs) are reported. A cyclohexane-1,3,5-tricarboxamide (CTA) core provides face-to-face hydrogen bonding and a planar conformation, inducing the self-assembly of supramolecular polymers. The CTA core was substituted with three arylazopyrazole (AAP) arms. AAP is a molecular photoswitch that isomerizes reversibly under alternating UV and green light irradiation. The E isomer of AAP is planar, favoring the self-assembly, whereas the Z isomer has a twisted structure, leading to a disassembly of the supramolecular polymers. By using tailor-made molecular design of the tripodal gelator, light-responsive organogels and hydrogels were obtained. Additionally, in the case of the hydrogels, AAP was coupled to the core through hydrazones, so that the hydrogelator and, hence, the photoresponsive hydrogel could also be assembled and disassembled by using dynamic covalent chemistry.

Impact of "half-crown/two carbonyl"-Ca2+ metal ion interactions of a low molecular weight gelator (LMWG) on its fiber to nanosphere morphology transformation with a gel-to-sol phase transition

We report here a smart functional low molecular weight gelator (LMWG) L, containing an unusual metal ion coordination site, i.e. "half-crown/two carbonyl". The gelator L shows excellent gelation behavior with typical fibrillar morphology in acetonitrile, methanol and ethanol media. Upon Ca2+ ion binding with its "half-crown/two carbonyl" coordination site, the acetonitrile gel of L exhibits a fiber to nanosphere morphology transformation along with a gel-to-sol phase transition as confirmed by microscopic investigation and by direct naked eye visualization, respectively. The mechanism involved in this morphology transformation and gel-to-sol phase transition process was studied thoroughly with the help of computational calculations and various spectroscopic experiments and discussed.

Light-Responsive Shape: From Micrometer-Long Nanocylinders to Compact Particles in Electrostatic Self-Assembly

A light-triggered shape change of supramolecular nanostructures is achieved through electrostatically self-assembly of linear polyelectrolytes and oppositely charged dyes in aqueous solution: Upon UV-irradiation, 1-µm-long, flexible cylinders with a cross-section of 10 nm convert into ellipsoids of 400 nm × 40 nm. The nano-object shape is encoded in the molecular dye structure.

Multi-responsive coordination polymers utilising metal-stabilised, dynamic covalent imine bonds

We report how the combination of dynamic covalent imine bonds and coordination bonds in a single polymer material not only imparts enhanced stability to the final polymer, but also allows the material to be sensitive to a range of stimuli, offering more fine-grained control over its properties.

pH-Responsive self-assembly of cationic surfactants with a star-shaped tetra-carboxylate acid and the solubilization of hydrophobic drugs

This work involved the construction of pH-responsive self-assembly systems from a pH-sensitive four-arm carboxylate acid (4EOCOOH) and either the cationic single chain surfactant dodecyl trimethyl ammonium bromide (DTAB) or the cationic gemini surfactant hexamethylene-1,6-bis(dodecyldimethylammonium bromide) (12-6-12). It was found that the constructed oligomeric-like structures from the mixtures of 4EOCOOH with DTAB or 12-6-12 greatly enhance the aggregation ability of the mixtures, thus improving the pH-responsivity. In particular, surfactant concentrations significantly affect the pH-responsivity at a fixed 4EOCOOH concentration. At higher surfactant concentrations, the pH-responsivity is suppressed, while at lower surfactant concentrations, the mixed aggregates gradually change from micelles to unstable large spherical aggregates or vesicles, and then to stable spherical aggregates, with decreasing pH. Moreover, the surfactant/4EOCOOH systems have different solubilization abilities for three hydrophobic drugs. For quercetin and baicalein, the systems support much better solubilization at lower pH values, while for indomethacin, the systems show better solubilization at higher pH values. In particular, compared with DTAB, 12-6-12 is more efficient in constructing pH-responsive systems, and the 12-6-12/4EOCOOH mixture shows better ability for solubilizing hydrophobic drugs. This work will be helpful in the design of high-efficiency, pH-responsive surfactant systems for solubilizing hydrophobic drugs by simply mixing pH-sensitive molecules with surfactants.

Hierarchical Self-Assembly of Histidine-Functionalized Peptide Amphiphiles into Supramolecular Chiral Nanostructures

Controlling the hierarchical organization of self-assembling peptide amphiphiles into supramolecular nanostructures opens up the possibility of developing biocompatible functional supramolecular materials for various applications. In this study, we show that the hierarchical self-assembly of histidine- (His-) functionalized PAs containing d- or l-amino acids can be controlled by both solution pH and molecular chirality of the building blocks. An increase in solution pH resulted in the structural transition of the His-functionalized chiral PA assemblies from nanosheets to completely closed nanotubes through an enhanced hydrogen-bonding capacity and π-π stacking of imidazole ring. The effects of the stereochemistry and amino acid sequence of the PA backbone on the supramolecular organization were also analyzed by CD, TEM, SAXS, and molecular dynamics simulations. In addition, an investigation of chiral mixtures revealed the differences between the hydrogen-bonding capacities and noncovalent interactions of PAs with d- and l-amino acids.

Tuning the pH-Switch of Supramolecular Polymer Carriers for siRNA to Physiologically Relevant pH

The preparation of histidine enriched dendritic peptide amphiphiles and their self-assembly into multicomponent pH-switchable supramolecular polymers is reported. Alternating histidine and phenylalanine peptide synthons allow the assembly/disassembly to be adjusted in a physiologically relevant range of pH 5.3-6.0. Coassembly of monomers equipped with dendritic tetraethylene glycol chains with monomers bearing peripheral primary amine groups leads to nanorods with a tunable cationic surface charge density. These surface functional supramolecular polycations are able to reversibly bind short interfering RNA (siRNA). The nanorod-like supramolecular polymers, their complexation with siRNA, and the pH-triggered assembly/disassembly of the supramolecular carriers are characterized via circular dichroism spectroscopy, gel electrophoresis, as well as transmission electron microscopy. Multicomponent supramolecular polymers represent a modular and promising strategy for applications as responsive carrier vehicles, codelivery strategies, and gene therapy.

Mesoporous polydopamine nanoparticles with co-delivery function for overcoming multidrug resistance via synergistic chemo-photothermal therapy

Theranostic agents for combined chemo-photothermal therapy have attracted intensive interest in the treatment of multi-drug resistance (MDR) in cancer therapy. However, the development of simple theranostic agents as dual hosts for both heat and a high payload of chemotherapeutic agents remains a big challenge. Herein, mesoporous polydopamine nanoparticles (MPDA) were successfully developed with properties of a high payload of DOX (up to 2000 μg mg^-1) and the drug efflux inhibitor TPGS (d-α-tocopheryl polyethylene glycol 1000 succinate), as well as strong near-infrared absorption. Particularly, DOX and TPGS were sequentially loaded in the pore space and on the external particle surface of MPDA via π-π stacking and hydrophobic interactions, resulting in a MPDA-DOX@TPGS complex. The DOX release observably relies on the pH value and glutathione (GSH). Furthermore, it is possible to accelerate the rate of drug release by NIR irradiation. Importantly, the MPDA-DOX@TPGS complex was found to escape from endosomes after cellular uptake and release the loaded drugs into the cytosol. By TPGS mediated MDR reversal, the delivered DOX induced significant cytotoxicity to MCF-7/ADR cells. Besides, MPDA can absorb the NIR light and convert it into fatal heat to kill the cancer cells. As a consequence, the combined therapy in our system yields a synergistic effect with high therapeutic efficacy.

Reactive Oxygen Species and Glutathione Dual Redox-Responsive Supramolecular Assemblies with Controllable Release Capability

A dual redox and biorelevant triggered supramolecular system is developed through noncovalent supramolecular inclusion interactions between the ferrocene (Fc) modified on camptothecin (CPT) and β-cyclodextrin (β-CD) at the end of methoxy polyethylene glycol (mPEG). With these two segments, a stable noncovalent supramolecular structure, i.e., mPEG-β-CD/Fc-CPT, can be formed, and then self-assembled into micellar structures in water. Interestingly, these supramolecular micelles showed uniform sphere structure, high and constant drug loading content, hyper-fast redox-responsive drug release, and exhibited equal cellular proliferation inhibition toward A549 cancer cells. The cytotoxicity evaluation of mPEG-β-CD also indicated good biocompatibility. In vivo results revealed the mPEG-β-CD/Fc-CPT nanoparticles had higher in vivo efficacy without side effects. It is anticipated this supramolecular complex may serve as a new kind of promising alternative for drug delivery systems.