Poly(amino acid)-Based Gel Fibers with pH Responsivity by Coaxial Reactive Electrospinning

Enhanced UV protection in silk fibroin based electrospun fabrics realized via orientation induced high efficiency of azobenzene isomerization

Due to the poor UV protection capability, natural silk fabrics not only suffer from easy damage by sunshine but also induce possible sunburn in the human body. Efficient azobenzene isomerization and enhanced UV shielding are realized by replacing the natural silk with natural protein silk fibroin (SF) and electrospinning together with light-responsive copolymer P(MEO2-co-OEG300-co-AHMA). Compared to a solution cast film, the absorption peak intensity at 355 nm is 60 % higher in UV-Vis spectra of the electropsun SF/P(MEO2-co-OEG300-co-AHMA) fabrics. This improvement is related to the highly oriented chains, inducing more space and higher efficiency for azobenzene isomerization. Only exposure to visible light for 20 min, the absorption peak corresponding to the trans- state at 355 nm recovers to 92.5 % in the electrospun fabrics, which is at least 100 % faster than that in the solution cast film (50 min). It is related to the zip effect of the isomerization in the oriented chain structure. Thus, not only the absorption of UV radiation, but also the isomerization rate is enhanced. Based on these unique absorption and recovery capabilities, the SF based electrospun fabrics can be used to replace the natural silk fabrics for UV shielding in summer, especially for cyclic use.

Overview of Tissue Engineering and Drug Delivery Applications of Reactive Electrospinning and Crosslinking Techniques of Polymeric Nanofibers with Highlights on Their Biocompatibility Testing and Regulatory Aspects

Traditional electrospinning is a promising technique for fabricating nanofibers for tissue engineering and drug delivery applications. The method is highly efficient in producing nanofibers with morphology and porosity similar to the extracellular matrix. Nonetheless, and in many instances, the process has faced several limitations, including weak mechanical strength, large diameter distributions, and scaling-up difficulties of its fabricated electrospun nanofibers. The constraints of the polymer solution's intrinsic properties are primarily responsible for these limitations. Reactive electrospinning constitutes a novel and modified electrospinning techniques developed to overcome those challenges and improve the properties of the fabricated fibers intended for various biomedical applications. This review mainly addresses reactive electrospinning techniques, a relatively new approach for making in situ or post-crosslinked nanofibers. It provides an overview of and discusses the recent literature about chemical and photoreactive electrospinning, their various techniques, their biomedical applications, and FDA regulatory aspects related to their approval and marketing. Another aspect highlighted in this review is the use of crosslinking and reactive electrospinning techniques to enhance the fabricated nanofibers' physicochemical and mechanical properties and make them more biocompatible and tailored for advanced intelligent drug delivery and tissue engineering applications.

Surface Properties of N,N-Dimethylformamide-Water Mixtures, As Seen from Computer Simulations

The liquid-vapor interface of N,N-dimethylformamide (DMF)-water mixtures, spanning the entire composition range, is investigated in detail at 298 K by molecular dynamics simulation and intrinsic surface analysis. DMF molecules are found to adsorb strongly at the liquid surface, but this adsorption extends only to the first molecular layer. Water and DMF molecules mix with each other on the molecular scale even in the surface layer; thus, no marked self-association of any of the components is seen at the liquid surface. The major surface component prefers such orientation in which the molecular dipole vector lays parallel with the macroscopic plane of the surface. On the other hand, the preferred orientation of the minor component is determined, at both ends of the composition range, by the possibility of H-bond formation with the major component. The lack of H-donating ability of DMF leads to a rapid breakup of the percolating H-bond network at the surface; due to the strong adsorption of DMF, this breakup occurs below the bulk phase DMF mole fraction of 0.03. The disruption of the surface H-bond network also accelerates the exchange of both species between the liquid surface and bulk liquid phase, although, for water, this effect becomes apparent only above a bulk phase DMF mole fraction of 0.4. H-bonds formed by a DMF and a water molecule live, on average, 25-60% longer than those formed by two water molecules at the liquid surface. A similar, but smaller (i.e., about 10-20%) difference is seen in the bulk liquid phase. The enhanced surface mobility of the molecules results in 2-6 times larger diffusion coefficient and 2-5 times shorter H-bond lifetime values at the liquid surface than in the bulk liquid phase. The diffusion of both molecules is slowed down in the presence of the other species; in the case of DMF, this effect is caused by the formation of water-DMF H-bonds, whereas for water, steric hindrances imposed by the bulky DMF neighbors are responsible for this slowing down.

Local Structure of DMF-Water Mixtures, as Seen from Computer Simulations and Voronoi Analysis

Molecular dynamics simulations of mixtures of N,N-dimethylformamide (DMF) with water of various compositions, covering the entire composition range, are performed on the canonical (N,V,T) ensemble. The local structure of the mixtures is analyzed in terms of radial distribution functions and the contributions of the first five neighbors to them, various order parameters of the water molecules around each other, and properties of the Voronoi polyhedra of the molecules. The analyses lead to the following main conclusions. The two molecules are mixing with each other even on the molecular scale; however, small self-aggregates of both components persist even at their small mole fraction values. In particular, water-water H-bonds exist in the entire composition range, while water clusters larger than 3 and 2 molecules disappear above the DMF mole fraction values of about 0.7 and 0.9, respectively. The O atoms of the DMF molecules can well replace water O atoms in the hydrogen-bonding network. Further, the H-bonding structure is enhanced by the presence of the hydrophobic CH₃ groups of the DMF molecules. On the other hand, the H-bonding network of the molecules gradually breaks down upon the addition of DMF to the system due to the lack of H-donating groups of the DMF molecules. Finally, in neat DMF, the molecules form weak, CH-donated H-bonds with each other; however, these H-bonds disappear upon the addition of water due to the increasing competition with the considerably stronger OH-donated H-bonds DMF can form with the water molecules.

A Review on Electrospun Poly(amino acid) Nanofibers and Their Applications of Hemostasis and Wound Healing

The timely and effective control and repair of wound bleeding is a key research issue all over the world. From traditional compression hemostasis to a variety of new hemostatic methods, people have a more comprehensive understanding of the hemostatic mechanism and the structure and function of different types of wound dressings. Electrospun nanofibers stand out with nano size, high specific surface area, higher porosity, and a variety of complex structures. They are high-quality materials that can effectively promote wound hemostasis and wound healing because they can imitate the structural characteristics of the skin extracellular matrix (ECM) and support cell adhesion and angiogenesis. At the same time, combined with amino acid polymers with good biocompatibility not only has high compatibility with the human body but can also be combined with a variety of drugs to further improve the effect of wound hemostatic dressing. This paper summarizes the application of different amino acid electrospun wound dressings, analyzes the characteristics of different materials in preparation and application, and looks forward to the development of directions of poly(amino acid) electrospun dressings in hemostasis.

A Review of Sustained Drug Release Studies from Nanofiber Hydrogels

Polymer nanofibers have exceptionally high surface area. This is advantageous compared to bulk polymeric structures, as nanofibrils increase the area over which materials can be transported into and out of a system, via diffusion and active transport. On the other hand, since hydrogels possess a degree of flexibility very similar to natural tissue, due to their significant water content, hydrogels made from natural or biodegradable macromolecular systems can even be injectable into the human body. Due to unique interactions with water, hydrogel transport properties can be easily modified and tailored. As a result, combining nanofibers with hydrogels would truly advance biomedical applications of hydrogels, particularly in the area of sustained drug delivery. In fact, certain nanofiber networks can be transformed into hydrogels directly without the need for a hydrogel enclosure. This review discusses recent advances in the fabrication and application of biomedical nanofiber hydrogels with a strong emphasis on drug release. Most of the drug release studies and recent advances have so far focused on self-gelling nanofiber systems made from peptides or other natural proteins loaded with cancer drugs. Secondly, polysaccharide nanofiber hydrogels are being investigated, and thirdly, electrospun biodegradable polymer networks embedded in polysaccharide-based hydrogels are becoming increasingly popular. This review shows that a major outcome from these works is that nanofiber hydrogels can maintain drug release rates exceeding a few days, even extending into months, which is an extremely difficult task to achieve without the nanofiber texture. This review also demonstrates that some publications still lack careful rheological studies on nanofiber hydrogels; however, rheological properties of hydrogels can influence cell function, mechano-transduction, and cellular interactions such as growth, migration, adhesion, proliferation, differentiation, and morphology. Nanofiber hydrogel rheology becomes even more critical for 3D or 4D printable systems that should maintain sustained drug delivery rates.

Evidence for bicomponent fibers: A review

Recently, bicomponent fibers have been attracting much attention due to their unique structural characteristics and properties. A common concern was how to characterize a bicomponent fiber. In this review, we generally summarized the classification, structural characteristics, preparation methods of the bicomponent fibers, and focused on the experimental evidence for the identification of bicomponent fibers. Finally, the main challenges and future perspectives of bicomponent fibers and their characterization are provided. We hope that this review will provide readers with a comprehensive understanding of the design and characterization of bicomponent fibers.

Poly(amino acid) based fibrous membranes with tuneable in vivo biodegradation

In this work two types of biodegradable polysuccinimide-based, electrospun fibrous membranes are presented. One contains disulfide bonds exhibiting a shorter (3 days) in vivo biodegradation time, while the other one has alkyl crosslinks and a longer biodegradation time (more than 7 days). According to the mechanical measurements, the tensile strength of the membranes is comparable to those of soft the connective tissues and visceral tissues. Furthermore, the suture retention test suggests, that the membranes would withstand surgical handling and in vivo fixation. The in vivo biocompatibility study demonstrates how membranes undergo in vivo hydrolysis and by the 3rd day they become poly(aspartic acid) fibrous membranes, which can be then enzymatically degraded. After one week, the disulfide crosslinked membranes almost completely degrade, while the alkyl-chain crosslinked ones mildly lose their integrity as the surrounding tissue invades them. Histopathology revealed mild acute inflammation, which diminished to a minimal level after seven days.

Calculation of the Free Energy of Mixing as a Tool for Assessing and Improving Potential Models: The Case of the N,N-Dimethylformamide-Water System

The Helmholtz free energy, energy, and entropy of mixing of N,N-dimethylformamide (DMF) and water are calculated in the entire composition range by means of Monte Carlo computer simulations and thermodynamic integration using all possible combinations of five DMF and three widely used water models. Our results reveal that the mixing of DMF and water is highly non-ideal. Thus, in their dilute solutions, both molecules induce structural ordering of the major component, as evidenced by the concomitant decrease in the entropy. Among the 15 model combinations considered, only 4 reproduce the well-known full miscibility of DMF and water, 3 of which strongly exaggerate the thermodynamic driving force of the miscibility. Thus, the combination of the CS2 model of DMF and the TIP4P/2005 water model reproduces the properties of the DMF-water mixtures far better than the other combinations tested. Our results also reveal that moving a fractional negative charge from the N atom to the O atom of the DMF molecule, leading to the increase in its dipole moment, improves the miscibility of the model with water. Starting from the CS2 model and optimizing the charge to be moved, we propose a new model of DMF that reproduces very accurately both the Helmholtz free energy of mixing of aqueous DMF solutions in the entire composition range (when used in combination with the TIP4P/2005 water model) and also the internal energy of neat DMF.

Solvothermal preparation of luminescent zinc(II) and cadmium(II) coordination complexes based on the new bi-functional building block and photo-luminescent sensing for Cu2+, Al3+ and L-lysine

In industry, over usage of Cu²⁺ and Al³⁺ will lead to toxic wastewater, which further to give serious pollution for the environment. On the other hand, L-lysine can enhance serotonin release in the amygdala, with subsequent changes in psychobehavioral responses to stress. Therefore it is the urgent problem to design a method for detecting the amount of Cu²⁺, Al³⁺, and L-lysine. In this work, through the solvothermal synthesis method, two new coordination complexes based on the new bifunctional building block 4'-(1H-1,2,4-triazole-1-yl)- [1,1'-biphenyl]-4-carboxylic acid (HL) have been synthesized, namely, [Zn(L)₂·4H₂O] (complex 1) and [Cd(L)₂·4H₂O] (complex 2). X-ray single-crystal diffractometer was used to analyze its structure, powder X-ray diffraction (PXRD) patterns confirmed that 1 and 2 powder's purity and 1 can keep stable during the detection process of Cu²⁺, Al³⁺, and L-lysine, respectively. Elemental analysis, thermogravimetric analysis, infrared analysis, ultraviolet analysis and fluorescent spectrum have been used to characterize these complexes. The photo-luminescent test showed that 1 can accurately recognize Al³⁺ and Cu²⁺ among various cations. On the other hand, 1 can distinguish L-lysine among amino acid molecules. Therefore, 1 can be utilized as a multifunctional fluorescent probe for Al³⁺(K_sv = 1.5570 × 10⁴ [M]^-1), Cu²⁺(K_sv = 1.4948 × 10⁴ [M]^-1) and L-lysine (K_sv = 4.9118 × 10⁴ [M]^-1) with low detection limits (17.5 μM, 18.2 μM, 5.6 μM) respectively.

Convenient ultrasonic preparation of a water stable cluster-based Cadmium(II) coordination material and highly sensitive fluorescent sensing for biomarkers DPA and 5-HT

In recent years, a new type of micro-porous material, namely metal organic framework material, has received more and more attention from many basic and industrial fields because these materials possess unique advantages. In this work, through the powerful sonochemical preparation method, a three-dimensional cluster-based Cd^II-MOFs, {[Cd(abtz)₂(H₂O)₂]·(ClO₄)₂·H₂O}_n (1, abtz = 1-(4-aminobenzyl)-1H-1,2,4-triazole) can be quickly synthesized in the facile ultrasonic method. Powder X-ray diffraction (PXRD) measurement confirms that these bulky samples 1 (synthesized on different ultrasonic powers and ultrasonic time conditions) were pure. In addition, ultrasonic chemical time and irradiation power did not change the structure of composites materials 1. SEM and morphological changes of 1 in the ultrasonic synthesis are also determined. Moreover, 1 exhibits good stability, the structure of 1 can be maintained not just in various solvents, and in aqueous environments with pH values from 2 to 12. Photo-luminescent experiment also reveals that complex 1 has the excellent application prospect as highly sensitive sensing material for the biomarker DPA (2,6-pyridine dicarboxylic acid) and 5-HT (5-hydroxytryptamine) through the photo-luminescence "turn-on" and "turn-off" effect, respectively. Further photo-luminescent measurements also show that different ultrasonic powers and ultrasonic time can effectively induce fluorescent sensing enhancement for biomarkers DPA and 5-HT based on the water stable clustered-based cadmium(II) coordination framework.

Polyphenol scaffolds in tissue engineering

Polyphenols are a class of ubiquitous compounds distributed in nature, with fascinating inherent biocompatible, bioadhesive, antioxidant, and antibacterial properties. The unique polyphenolic structures based on catechol or pyrogallol moieties allow for strong non-covalent interactions (e.g., multiple hydrogen bonding, electrostatic, and cation-π interactions) as well as covalent interactions (e.g., Michael addition/Schiff-base reaction, radical coupling reaction, and dynamic coordination interactions with boronate or metal ions). This review article provides an overview of the polyphenol-based scaffolds including the hydrogels, films, and nanofibers that have emerged from chemical and functional signatures during the past years. A full description of the structure-function relationships in terms of their utilization in wound healing, bone regeneration, and electroactive tissue engineering is also carefully discussed, which may pave the path towards the rational design and facile preparation of next-generation polyphenol scaffolds for tissue engineering applications.

A review of smart electrospun fibers toward textiles

Electrospinning as a versatile technology has attracted a large amount of attention in the past few decades due to the facile way to produce micro- and nano-scale fibers featuring flexibility, large specific surface area and high porosity. Stimuli-responsive polymers are a class of smart materials that are capable of sensing surround environment and interacting with them. Therefore, the combination of electrospinning and smart materials could have a great deal of benefits over the development of smart fibers. In this review, it offers a comprehensive understanding of smart electrospun fibers toward textile applications. Firstly, the definition of smart fibers and the differences between interactive fibers and passive interactive fibers are briefly introduced. Then some interactive fibers made from temperature-, pH-, light-, electric field/electricity-, magnetic field-, multi-responsive polymers, as well as some polymers featuring piezoelectric and triboelectric effect which are suitable flexible electrics, are emphasized with their applications in the form of electrospun fibers. Afterwards, some passive and hybrid smart electrospun fibers are introduced. Finally, associated challenges and perspectives are summarized and discussed.

•

Understanding of passive smart electrospun fibers and interactive smart electrospun fibers.

•

The recent progress in flexible electronics from electrospun fibers.

•

The recent progress in stimuli-responsive polymers applied in interactive smart electrospun fibers.

Structural design toward functional materials by electrospinning: A review

Electrospinning as one of the most versatile technologies have attracted a lot of scientists’ interests in past decades due to its great diversity of fabricating nanofibers featuring high aspect ratio, large specific surface area, flexibility, structural abundance, and surface functionality. Remarkable progress has been made in terms of the versatile structures of electrospun fibers and great functionalities to enable a broad spectrum of applications. In this article, the electrospun fibers with different structures and their applications are reviewed. First, several kinds of electrospun fibers with different structures are presented. Then the applications of various structural electrospun fibers in different fields, including catalysis, drug release, batteries, and supercapacitors, are reviewed. Finally, the application prospect and main challenges of electrospun fibers are discussed. We hope that this review will provide readers with a comprehensive understanding of the structural design and applications of electrospun fibers in different fields.

Fabrication of flexible SiO2 nanofibrous yarn via a conjugate electrospinning process

Nowadays, different kinds of polymers, including ceramics, are electrospun into fibrous materials with different structures by electrospinning. Generally, the as-spun ceramic fibers are randomly oriented membranes and brittle without flexibility. Here, we report the fabrication of flexible SiO2 electrospun yarns using poly(vinyl alcohol) (PVA) as a template through a conjugate electrospinning process and calcination. It was found that the calcined as-spun fibers and yarns are obviously thinned with PVA component removal. Fourier transform infrared spectroscopy and energy-dispersive spectroscopy examinations suggested that the obtained yarn after calcination was SiO2 yarn. The SiO2 yarn showed good flexibility without cracking after 180° bending. The flexible ceramic yarn may have potential application in functional textiles.

Investigation of the Cytotoxicity of Electrospun Polysuccinimide-Based Fiber Mats

This study investigated cell viability in the presence of allylamine-modified and plasma-treated electrospun polysuccinimide fiber mats (PSI-AAmp). Low pressure non-equilibrium plasma was used for crosslinking the PSI-AAm. Comparison of FTIR and XPS analyses demonstrated that crosslinking occurred on the surface of the samples. Cell viability was investigated using the MG-63 osteosarcoma cell line and WST-1 viability reagent. Since PSI hydrolyzes to poly(aspartic acid) (PASP), PASP was used in addition to the regular controls (cells only). Phase contrast showed normal morphology in all cases at 24 h; however, in the presence of PSI-AAmp at 72 h, some rounded, dead cells could also be seen, and proliferation was inhibited. Since proliferation in the presence of PASP alone was not inhibited, the cause of inhibition was not the final product of the hydrolysis. Further investigations will be carried out to pinpoint the cause.

Recent advances in soft functional materials: preparation, functions and applications

Synthetic materials and biomaterials with elastic moduli lower than 10 MPa are generally considered as soft materials. Research studies on soft materials have been boosted due to their intriguing features such as light-weight, low modulus, stretchability, and a diverse range of functions including sensing, actuating, insulating and transporting. They are ideal materials for applications in smart textiles, flexible devices and wearable electronics. On the other hand, benefiting from the advances in materials science and chemistry, novel soft materials with tailored properties and functions could be prepared to fulfil the specific requirements. In this review, the current progress of soft materials, ranging from materials design, preparation and application are critically summarized based on three categories, namely gels, foams and elastomers. The chemical, physical and electrical properties and the applications are elaborated. This review aims to provide a comprehensive overview of soft materials to researchers in different disciplines.

Electrospun Environment Remediation Nanofibers Using Unspinnable Liquids as the Sheath Fluids: A Review

Electrospinning, as a promising platform in multidisciplinary engineering over the past two decades, has overcome major challenges and has achieved remarkable breakthroughs in a wide variety of fields such as energy, environmental, and pharmaceutics. However, as a facile and cost-effective approach, its capability of creating nanofibers is still strongly limited by the numbers of treatable fluids. Most recently, more and more efforts have been spent on the treatments of liquids without electrospinnability using multifluid working processes. These unspinnable liquids, although have no electrospinnability themselves, can be converted into nanofibers when they are electrospun with an electrospinnable fluid. Among all sorts of multifluid electrospinning methods, coaxial electrospinning is the most fundamental one. In this review, the principle of modified coaxial electrospinning, in which unspinnable liquids are explored as the sheath working fluids, is introduced. Meanwhile, several typical examples are summarized, in which electrospun nanofibers aimed for the environment remediation were prepared using the modified coaxial electrospinning. Based on the exploration of unspinnable liquids, the present review opens a way for generating complex functional nanostructures from other kinds of multifluid electrospinning methods.

Fully amino acid-based hydrogel as potential scaffold for cell culturing and drug delivery

Polymer hydrogels are ideal scaffolds for both tissue engineering and drug delivery. A great advantage of poly(amino acid)-based hydrogels is their high similarity to natural proteins. However, their expensive and complicated synthesis often limits their application. The use of poly(aspartic acid) (PASP) seems an appropriate solution for this problem due to the relatively cheap and simple synthesis of PASP. Using amino acids not only as building blocks in the polymer backbone but also as cross-linkers can improve the biocompatibility and the biodegradability of the hydrogel. In this paper, PASP cross-linked with cystamine (CYS) and lysine-methylester (LYS) was introduced as fully amino acid-based polymer hydrogel. Gels were synthesized employing six different ratios of CYS and LYS. The pH dependent swelling degree and the concentration of the elastically active chain were determined. After reduction of the disulfide bonds of CYS, the presence of thiol side groups was also detected. To determine the concentration of the reactive cross-linkers in the hydrogels, a new method based on the examination of the swelling behavior was established. Using metoprolol as a model drug, cell proliferation and drug release kinetics were studied at different LYS contents and in the presence of thiol groups. The optimal ratio of cross-linkers for the proliferation of periodontal ligament cells was found to be 60-80% LYS and 20-40% CYS. The reductive conditions resulted in an increased drug release due to the cleavage of disulfide bridges in the hydrogels. Consequently, these hydrogels provide new possibilities in the fields of both tissue engineering and controlled drug delivery.

Free thiol groups on poly(aspartamide) based hydrogels facilitate tooth-derived progenitor cell proliferation and differentiation

Cell-based tissue reconstruction is an important field of regenerative medicine. Stem and progenitor cells derived from tooth-associated tissues have strong regeneration potential. However, their in vivo application requires the development of novel scaffolds that will provide a suitable three-dimensional (3D) environment allowing not only the survival of the cells but eliciting their proliferation and differentiation. Our aim was to study the viability and differentiation capacity of periodontal ligament cells (PDLCs) cultured on recently developed biocompatible and biodegradable poly(aspartamide) (PASP)-based hydrogels. Viability and behavior of PDLCs were investigated on PASP-based hydrogels possessing different chemical, physical and mechanical properties. Based on our previous results, the effect of thiol group density in the polymer matrix on cell viability, morphology and differentiation ability is in the focus of our article. The chemical composition and 3D structures of the hydrogels were determined by FT Raman spectroscopy and Scanning Electron Microscopy. Morphology of the cells was examined by phase contrast microscopy. To visualize cell growth and migration patterns through the hydrogels, two-photon microscopy were utilized. Cell viability analysis was performed according to a standardized protocol using WST-1 reagent. PDLCs were able to attach and grow on PASP-based hydrogels. An increase in gel stiffness enhanced adhesion and proliferation of the cells. However, the highest population of viable cells was observed on the PASP gels containing free thiol groups. The presence of thiol groups does not only enhance viability but also facilitates the osteogenic direction of the differentiating cells. These cell-gel structures seem to be highly promising for cell-based tissue reconstruction purposes in the field of regenerative medicine.

Experimental Investigation of Damage Formation in Planar Fibrous Networks During Stretching

This paper presents the results of unidirectional strain-controlled experiments on fibrous electrospun networks used to study damage formation during elongation. The experimental loading curve shows a symmetrical parabolic type dependence at large scale and saw tooth-like force−extension behaviour at small scale. The damage formation was quantified by determining the number and the magnitude of abrupt force drops. The experiments evidenced that damage evolution is a consequence of strain induced random events. The frequency distribution of the number of damages as well as the magnitude of rupture force were represented by histograms. The results of the present study provide a better insight into damage tolerance and complex nonlinear tensile properties of electrospun networks. In addition, it could suggest a possible probabilistic approach to the fiber bundle model which has mainly motivated this study.

Investigating the draw ratio and velocity of an electrically charged liquid jet during electrospinning

The investigation of the draw ratio and velocity of an electrospinning polymer solution jet is of great interest for understanding the formation of nanofibers. During the electrospinning process, the charged polymer solution jets were stretched by electric force, resulting in the formation of ultrathin fibers. In this study, theoretical deduction and experimental calculation were applied to evaluate the velocities and draw ratios of the charged jets at different electrospinning stages. Depending on the diameter of the charged jets at different electrospinning stages, the velocities and draw ratios of the charged jets were calculated with values far lower than the data in a previous report. The theoretical calculation was compared with experimental data using polyamic acid as a model polymer for electrospinning. The results indicated that during electrospinning, as the collecting distance was increased from 0 to 30 cm, the diameter of the electrospinning jet decreased from 18 800 nm to a constant value of around 245 nm, the solvent in the jet decreased from 96.50 wt% to 25.45 wt%, and the density of the jet increased from 0.9504 to 1.0995 g cm⁻³. These parameters led to the draw ratio and velocity of the jet experiencing first an increase and then a decrease in the value, and the highest draw ratio and velocity were 869 and 867 m s⁻¹, respectively, which are quite different from the data in previous reports.

Theoretical calculations and experiments were performed to determine the draw ratio and velocity of an electrospinning jet.

Emerging biomedical applications of polyaspartic acid-derived biodegradable polyelectrolytes and polyelectrolyte complexes

A summary of positive biomedical attributes of biodegradable polyelectrolytes (PELs) prepared from aspartic acid is provided. The utility of these PELs in emerging applications such as biomineralization modulators, antimycobacterials, biocompatible cell encapsulants and tissue adhesives is highlighted.

Electrospun nanofiber reinforced composites: a review

High performance electrospun nanofibers could be used to fabricate nanofiber reinforced composites.