Boronolectins and fluorescent boronolectins: an examination of the detailed chemistry issues important for the design

Tetraborylation of p-Benzynes Generated by the Masamune-Bergman Cyclization through Reaction Design Based on the Reaction Path Network

Designing the reactant molecule of an initial reaction, based on quantum chemical pathway exploration, enabled us to access a new reaction, i.e., the tetraborylation reaction of p-benzynes generated from 1,2-diethynylbenzene derivatives, using bis(pinacolato)diborane(4) (B2pin2). Based on the reaction path network generated via the artificial-force-induced reaction (AFIR) method, desired and undesired paths were identified and used to modify the chemical structure of the reactant. After the in silico screening, the optimal structure of the reactant was determined to be a 1,2-diethynylbenzene derivative with a butylene linker. The reaction of the optimized reactant and its derivatives with an excess of B2pin2 gave the tetraborylated products in good yields (up to 58%). It is quite intriguing that the two carbons of p-benzyne behave formally as dicarbenes in this reaction.

Ratiometric fluorescence detection of dopamine based on copper nanoclusters and carbon dots

Nanoclusters for fluorescence detection are generally comprised of rare and expensive noble metals, and the nanoclusters based on more affordable transition metal have attracted increasing attention. This study designed a ratiometric fluorescent probe to detect dopamine (DA), an important neurotransmitter. With carbon dots encapsulated within silica (CDs@SiO2) as the reference, the emitted reference signal was almost unchanged due to the protection of inert silicon shell. Meanwhile, copper nanoclusters modified with 3-aminophenyl boronic acid (APBA-GSH-CuNCs) provided the sensing signal, in which the phenylboric acid could specifically recognize the cis-diol structure of DA, and caused the fluorescence quenching by photoinduced electron transfer. This dual emission ratiometric fluorescent probe exhibited high sensitivity and anti-interference, and was able to selectively responded to DA with a linear range of 0-1.4 mM, the detection limit of 5.6 nM, and the sensitivity of 815 mM-1. Furthermore, the probe successfully detected DA in human serum samples, yielding recoveries ranging from 92.5% to 102.7%. Overall, this study highlights the promising potential of this ratiometric probe for detecting DA.

Enlightening the Path to Protein Engineering: Chemoselective Turn-On Probes for High-Throughput Screening of Enzymatic Activity

Many successful stories in enzyme engineering are based on the creation of randomized diversity in large mutant libraries, containing millions to billions of enzyme variants. Methods that enabled their evaluation with high throughput are dominated by spectroscopic techniques due to their high speed and sensitivity. A large proportion of studies relies on fluorogenic substrates that mimic the chemical properties of the target or coupled enzymatic assays with an optical read-out that assesses the desired catalytic efficiency indirectly. The most reliable hits, however, are achieved by screening for conversions of the starting material to the desired product. For this purpose, functional group assays offer a general approach to achieve a fast, optical read-out. They use the chemoselectivity, differences in electronic and steric properties of various functional groups, to reduce the number of false-positive results and the analytical noise stemming from enzymatic background activities. This review summarizes the developments and use of functional group probes for chemoselective derivatizations, with a clear focus on screening for enzymatic activity in protein engineering.

Optical Chemical Sensing of Iodide Ions: A Comprehensive Review for the Synthetic Strategies of Iodide Sensing Probes, Challenges, and Future Aspects

Among several anions, iodide (I^- ) ions play a crucial role in human biological activities. In it's molecular form (I₂ ), iodine is utilized for several industrial applications such as syntheses of medicines, fabric dyes, food additives, solar cell electrolytes, catalysts, and agrochemicals. The excess or deficiency of I^- ions in the human body and environmental samples have certain consequences. Therefore, the selective and sensitive detection of I^- ions in the human body and environment is vital for monitoring their overall profile. Amongst various analytical techniques for the estimation of I^- ions, optical-chemical sensing possesses the merits of high sensitivity, selectivity, and utilizing the least amount of sensing materials. The distinctive aims of this manuscript are (i) To comprehensively review the development of optical chemical sensors (fluorescent & colorimetric) reported between 2001-2021 using organic fluorescent molecules, supramolecular materials, conjugated polymers, and metal-organic frameworks (MOFs). (ii) To illustrate the design and synthetic strategies to create specific binding and high affinity of I^- ions which could help minimize negative consequences associated with its large size and high polarizability. (iii) The challenges associated with sensitivity and selectivity of I^- ions in aqueous and real samples. The probable future aspects concerning the optical chemical detection of I^- ions have also been discussed in detail.

Advances in aggregation induced emission (AIE) materials in biosensing and imaging of bacteria

With their ubiquitous nature, bacteria have had a significant impact on human health and evolution. Though as commensals residing in/on our bodies several bacterial communities support our health in many ways, bacteria remain one of the major causes of infectious diseases that plague the human world. Adding to this, emergence of antibiotic resistant strains limited the use of available antibiotics. The current available techniques to prevent and control such infections remain insufficient. This has been proven during one of greatest pandemic of our generation, COVID-19. It has been observed that bacterial coinfections were predominantly observed in COVID-19 patients, despite antibiotic treatment. Such higher rates of coinfections in critical patients even after antibiotic treatment is a matter of concern. Owing to many reasons across the world drug resistance in bacteria is posing a major problem i. According to Center for Disease control (CDC) antibiotic report threats (AR), 2019 more than 2.8 million antibiotic resistant cases were reported, and more than 35,000 were dead among them in USA alone. In both normal and pandemic conditions, failure of identifying infectious agent has played a major role. This strongly prompts the need to improve upon the existing techniques to not just effective identification of an unknown bacterium, but also to discriminate normal Vs drug resistant strains. New techniques based on Aggregation Induced Emission (AIE) are not only simple and rapid but also have high accuracy to visualize infection and differentiate many strains of bacteria based on biomolecular variations which has been discussed in this chapter.

Borate-driven ionic rectifiers based on sugar-bearing single nanochannels

Recently, much scientific effort has been centered on the control of the ionic transport properties of solid state nanochannels and the rational design and integration of chemical systems to induce changes in the ionic transport by means of interactions with selected target molecules. Here, we report the fabrication of a novel nanofluidic device based on solid-state nanochannels, which combines silane chemistry with both track-etched and atomic layer deposition (ALD) technologies. Nanodevice construction involves the coating of bullet-shaped single-pore nanochannels with silica (SiO₂) by ALD and subsequent surface modification by reaction between silanol groups exposed on pore walls and N-(3-triethoxysilylpropyl)-gluconamide, in order to create a gluconamide-decorated nanochannel surface. The formation of a boroester derivative resulting from the selective reaction of borate with the appended saccharides leads to important changes in the surface charge density and, concomitantly, in the iontronic properties of the nanochannel. Furthermore, we propose a binding model to rationalize the specific interaction saccharide-borate in the surface. Besides, this unique nanodevice exhibits a highly selective and reversible response towards borate/fructose exposure. On the basis of the surface charge variation resulting from borate binding, the nanochannel can reversibly switch between "ON" and "OFF" states in the presence of borate and fructose, respectively. In addition, this work describes the first report of the functionalization of PET/SiO₂ nanochannels by the ALD technique. We believe that this work provides a promising framework for the development of new nanochannel-based platforms suitable for multiple applications, such as water quality monitoring or directed molecular transport and separation.

Boronic acid complexes with amino phenolic N,O-ligands and their use for non-covalent protein fluorescence labeling

Phenylboronic acid (PBA) forms neutral tetrahedral N,O-coordinated 6-membered cyclic complexes with stability constants reaching the values as large as 1.3 × 10⁴ M^-1 at pH 7.4 in water with amino phenolic compounds including 2-(2'-hydroxyphenyl)-1H-benzimidazole (HPBI) often used for protein probing and labeling. The crystal structures of isolated complexes demonstrate unusually high for boronate adducts degree of the tetrahedral character of the boron atom with short B-N bonds in agreement with their high solution stability. The complexation of PBA with HPBI, causes a strong enhancement of the fluorescence of the "enol" form of the ligand, increases the affinity of the dye to a protein (bovine serum albumin) and makes more pronounced the shift in emission maximum induced by the protein binding. Similar, but larger effects are observed with an amino HPBI derivative and with a stronger boronic acid benzoxaborole. Thus, the binding constant to the protein about 2 × 10⁴ M^-1 for free HPBI increases to 1.2 × 10⁶ M^-1 for the complex of 5-amino-HPBI with benzoxaborole making it suitable for an efficient non-covalent protein labeling or bioconjugation.

Triazole, imidazole, and thiazole-based compounds as potential agents against coronavirus

The expansion of the novel coronavirus known as SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2), COVID-19 (coronavirus disease 2019), or 2019-nCoV (2019 novel coronavirus) is a global concern over its pandemic potential. The need for therapeutic alternatives to stop this new pandemic is urgent. Nowadays, no efficacious therapy is available, and vaccines and drugs are underdeveloped to cure or prevent SARS-CoV-2 infections in many countries. Some vaccines candidates have been approved; however, a number of people are still skeptical of this coronavirus vaccines. Probably because of issues related to the quantity of the vaccine and a possible long-term side effects which are still being studied. The previous pandemics of infections caused by coronavirus, such as SARS-CoV in 2003, the Middle East respiratory syndrome coronavirus (MERS-CoV) in 2012, HCoV-229E, and HCoV-OC43 were described in the 1960 s, -HCoV-NL63 isolated in 2004, and HCoV-HKU1identified in 2005 prompted researchers to characterize many compounds against these viruses. Most of them could be potentially active against the currently emerging novel coronavirus. Five membered nitrogen heterocycles with a triazole, imidazole, and thiazole moiety are often found in many bioactive molecules such as coronavirus inhibitors. This present work summarizes to review the biological and structural studies of these compound types as coronavirus inhibitors.

Glucose Detection of 4-Mercaptophenylboronic Acid-Immobilized Gold-Silver Core-Shell Assembled Silica Nanostructure by Surface Enhanced Raman Scattering

The importance of glucose in many biological processes continues to garner increasing research interest in the design and development of efficient biotechnology for the sensitive and selective monitoring of glucose. Here we report on a surface-enhanced Raman scattering (SERS) detection of 4-mercaptophenyl boronic acid (4-MPBA)-immobilized gold-silver core-shell assembled silica nanostructure (SiO₂@Au@Ag@4-MPBA) for quantitative, selective detection of glucose in physiologically relevant concentration. This work confirmed that 4-MPBA converted to 4-mercaptophenol (4-MPhOH) in the presence of H₂O₂. In addition, a calibration curve for H₂O₂ detection of 0.3 µg/mL was successfully detected in the range of 1.0 to 1000 µg/mL. Moreover, the SiO₂@Au@Ag@4-MPBA for glucose detection was developed in the presence of glucose oxidase (GOx) at the optimized condition of 100 µg/mL GOx with 1-h incubation time using 20 µg/mL SiO₂@Au@Ag@4-MPBA and measuring Raman signal at 67 µg/mL SiO₂@Au@Ag. At the optimized condition, the calibration curve in the range of 0.5 to 8.0 mM was successfully developed with an LOD of 0.15 mM. Based on those strategies, the SERS detection of glucose can be achieved in the physiologically relevant concentration range and opened a great promise to develop a SERS-based biosensor for a variety of biomedicine applications.

Methodologies and Strategies for Selective Borylation of C-Het and C-C Bonds

Organoborons have emerged as versatile building blocks in organic synthesis to achieve molecular diversity and as carboxylic acid bioisosteres with broad applicability in drug discovery. Traditionally, these compounds are prepared by the substitution of Grignard/lithium reagents with electrophilic boron species and Brown hydroboration. Recent developments have provided new routes for the efficient preparation of organoborons by applying reactions using chemical feedstocks with leaving groups. As compared to the previous methods that used organic halides (I, Br, and Cl), the direct borylation of less reactive C-Het and C-C bonds has become highly important to get efficiency and functional-group compatibility. This Review aims to provide a comprehensive overview of this topic, including (1) C-F bond borylation, (2) C-O bond borylation, (3) C-S bond borylation, (4) C-N bond borylation, and (5) C-C bond borylation. Considerable attention is given to the strategies and mechanisms involved. We expect that this Review will inspire chemists to discover more efficient transformations to expand this field.

Stimuli-Responsive Polymeric Nanocarriers for Drug Delivery, Imaging, and Theragnosis

In the past few decades, polymeric nanocarriers have been recognized as promising tools and have gained attention from researchers for their potential to efficiently deliver bioactive compounds, including drugs, proteins, genes, nucleic acids, etc., in pharmaceutical and biomedical applications. Remarkably, these polymeric nanocarriers could be further modified as stimuli-responsive systems based on the mechanism of triggered release, i.e., response to a specific stimulus, either endogenous (pH, enzymes, temperature, redox values, hypoxia, glucose levels) or exogenous (light, magnetism, ultrasound, electrical pulses) for the effective biodistribution and controlled release of drugs or genes at specific sites. Various nanoparticles (NPs) have been functionalized and used as templates for imaging systems in the form of metallic NPs, dendrimers, polymeric NPs, quantum dots, and liposomes. The use of polymeric nanocarriers for imaging and to deliver active compounds has attracted considerable interest in various cancer therapy fields. So-called smart nanopolymer systems are built to respond to certain stimuli such as temperature, pH, light intensity and wavelength, and electrical, magnetic and ultrasonic fields. Many imaging techniques have been explored including optical imaging, magnetic resonance imaging (MRI), nuclear imaging, ultrasound, photoacoustic imaging (PAI), single photon emission computed tomography (SPECT), and positron emission tomography (PET). This review reports on the most recent developments in imaging methods by analyzing examples of smart nanopolymers that can be imaged using one or more imaging techniques. Unique features, including nontoxicity, water solubility, biocompatibility, and the presence of multiple functional groups, designate polymeric nanocues as attractive nanomedicine candidates. In this context, we summarize various classes of multifunctional, polymeric, nano-sized formulations such as liposomes, micelles, nanogels, and dendrimers.

Chitosan reinforced hydrogels with swelling-shrinking behaviors in response to glucose concentration

Different hydrogels of poly(acrylamide-co-3-acrylamido phenylboronic acid-co-chitosan grafted maleic acid) (P(AM-co-AAPBA-co-CSMA)s) were synthesized using poly(ethylene glycol) diacrylate (PEGDA) as a crosslinker to serve for glucose sensing and insulin delivery. The structure and morphology of the hydrogels, named as CSPBA were studied by FTIR and SEM, while the mechanical properties were tested using dynamic mechanical analysis (DMA) and universal testing machine. The prepared hydrogels shrinked at low glucose concentration due to the 2:1 boronate-glucose binding, and swelled at high glucose concentration because of 1:1 boronate-glucose complexation. Both binding mechanisms are useful for glucose sensing and insulin delivery. The integration of CSMA into hydrogels network not only enhanced the response to glucose at physiological pH, but also improved the mechanical properties and increased the encapsulation efficiency of the prepared hydrogels. These CSPBA may find potential as implantable hydrogels in applications were continuous glucose monitoring and controlled release is beneficial.

Examination of pinanediol-boronic acid ester formation in aqueous media: relevance to the relative stability of trigonal and tetrahedral boronate esters

The interaction of pinanediol with 2-fluorophenylboronic acid and several other substituted phenylboronic acids was studied in 40% vol. aqueous acetonitrile by 1H and 11B NMR, potentiometric and spectrophotometric titrations at variable pH values. The experimental results reveal the formation of a very stable trigonal ester (Ktrig ≈ 2 × 104 M-1) and a significantly less stable tetrahedral hydroxocomplex (Ktet ≈ 5 × 103 M-1) in contrast to the traditionally observed inverted order of stabilities Ktrig < Ktet. Comparison of the crystal structure of the trigonal ester isolated from aqueous acetonitrile with the DFT simulated structure of the respective hydroxocomplex shows that an unusual order of stabilities Ktrig > Ktet is observed in spite of the existence of the usual strain release effect in the O-B-O angle considered responsible for the typically observed increased stability of the tetrahedral hydroxocomplex. A complementary study of the stability of the six-membered cyclic boronate esters of chromotropic acid demonstrated the order Ktrig ≪ Ktet although the strain was absent in these esters. The results for m-, p-substituted phenylboronic acids show that the stability of both five- and six-membered trigonal esters formed with pinanediol and chromotropic acid, respectively, is insensitive to electronic effects but the electron accepting substituents stabilize the hydroxocomplexes. It follows from the whole set of results that Ktet can be much larger than Ktrig in the absence of the strain, but with a sufficiently acidic diol, and that the presence of the strain does not necessarily make Ktet larger than Ktrig for a less acidic diol with a purely saturated hydrocarbon backbone. Thus, the electronic effects manifested in the acidity of the diol appear to be more significant than the strain release effect in determining the Ktet/Ktrig ratio.

Hydrogel-Based Colloidal Photonic Crystal Devices for Glucose Sensing

Diabetes, a common epidemic disease, is increasingly hazardous to human health. Monitoring body glucose concentrations for the prevention and therapy of diabetes has become very important. Hydrogel-based responsive photonic crystal (PC) materials are noninvasive options for glucose detection. This article reviews glucose-sensing materials/devices composed of hydrogels and colloidal photonic crystals (CPCs), including the construction of 2D/3D CPCs and 2D/3D hydrogel-based CPCs (HCPCs). The development and mechanisms of glucose-responsive hydrogels and the achieved technologies of HCPC glucose sensors were also concluded. This review concludes by showing a perspective for the future design of CPC glucose biosensors with functional hydrogels.

Functional Carbon Quantum Dots as Medical Countermeasures to Human Coronavirus

Therapeutic options for the highly pathogenic human coronavirus (HCoV) infections are urgently needed. Anticoronavirus therapy is however challenging, as coronaviruses are biologically diverse and rapidly mutating. In this work, the antiviral activity of seven different carbon quantum dots (CQDs) for the treatment of human coronavirus HCoV-229E infections was investigated. The first generation of antiviral CQDs was derived from hydrothermal carbonization of ethylenediamine/citric acid as carbon precursors and postmodified with boronic acid ligands. These nanostructures showed a concentration-dependent virus inactivation with an estimated EC50 of 52 ± 8 μg mL-1. CQDs derived from 4-aminophenylboronic acid without any further modification resulted in the second-generation of anti-HCoV nanomaterials with an EC50 lowered to 5.2 ± 0.7 μg mL-1. The underlying mechanism of action of these CQDs was revealed to be inhibition of HCoV-229E entry that could be due to interaction of the functional groups of the CQDs with HCoV-229E entry receptors; surprisingly, an equally large inhibition activity was observed at the viral replication step.

Aggregation of Gold Nanoparticles Caused in Two Different Ways Involved in 4-Mercaptophenylboronic Acidand Hydrogen Peroxide

The difference in gold nanoparticle (AuNPs) aggregation caused by different mixing orders of AuNPs, 4-mercaptophenylboronic acid (4-MPBA), and hydrogen peroxide (H₂O₂) has been scarcely reported. We have found that the color change of a ((4-MPBA + AuNPs) + H₂O₂) mixture caused by H₂O₂ is more sensitive than that of a ((4-MPBA + H₂O₂) + AuNPs) mixture. For the former mixture, the color changes obviously with H₂O₂ concentrations in the range of 0~0.025%. However, for the latter mixture, the corresponding H₂O₂ concentration is in the range of 0~1.93%. The mechanisms on the color change originating from the aggregation of AuNPs occurring in the two mixtures were investigated in detail. For the ((4-MPBA + H₂O₂) + AuNPs) mixture, free 4-MPBA is oxidized by H₂O₂ to form bis(4-hydroxyphenyl) disulfide (BHPD) and peroxoboric acid. However, for the ((4-MPBA+AuNPs) + H₂O₂) mixture, immobilized 4-MPBA is oxidized by H₂O₂ to form 4-hydroxythiophenol (4-HTP) and boric acid. The decrease in charge on the surface of AuNPs caused by BHPD, which has alarger steric hindrance, is poorer than that caused by -4-HTP, and this is mainly responsible for the difference in the aggregation of AuNPs in the two mixtures. The formation of boric acid and peroxoboric acid in the reaction between 4-MPBA and H₂O₂ can alter the pH of the medium, and the effect of the pH change on the aggregation of AuNPs should not be ignored. These findings not only offer a new strategy in colorimetric assays to expand the detection range of hydrogen peroxide concentrations but also assist in deepening the understanding of the aggregation of citrate-capped AuNPs involved in 4-MPBA and H₂O₂, as well as in developing other probes.

Synthesis and Evaluation of Protein-Phenylboronic Acid Conjugates as Lectin Mimetics

Glycan-binding molecules, such as lectins, are very important tools for characterizing, imaging, or targeting glycans and are often involved in either physiological or pathological processes. However, their availability is far less compared to the diversity of native glycans. Therefore, development of lectin mimetics with desired specificity and affinity is in high demand. Boronic acid reacts with 1,2- and 1,3-diols of saccharides in aqueous media through reversible boronate ester formation and are regarded as synthetic lectin mimetics. In this study, bovine serum albumin (BSA)-phenylboronic acid (PBA) conjugates were synthesized in a density-controlled manner by targeting both aspartic and glutamic acids to afford lectin mimetics with multivalent PBA, as multivalency is a key factor for glycan recognition in both specificity and affinity. The resultant BSA-PBA conjugates were characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis. Their macrophage cell surface glycan-binding capacity was characterized by a competitive lectin-binding assay examined by flow cytometry, and 3-(4,5-di-methylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed biocompatibility. These novel lectin mimetics will find a broad range of applications as they can be wittingly modified, altering binding specificity and capacity.

Noninvasive Glucose Monitoring with a Contact Lens and Smartphone

Diabetes has become a chronic metabolic disorder, and the growing diabetes population makes medical care more important. We investigated using a portable and noninvasive contact lens as an ideal sensor for diabetes patients whose tear fluid contains glucose. The key feature is the reversible covalent interaction between boronic acid and glucose, which can provide a noninvasive glucose sensor for diabetes patients. We present a phenylboronic acid (PBA)-based HEMA contact lens that exhibits a reversible swelling/shrinking effect to change its thickness. The difference in thickness can be detected in a picture taken with a smartphone and analyzed using software. Our novel technique offers the following capabilities: (i) non-enzymatic and continuous glucose detection with the contact lens; (ii) no need for an embedded circuit and power source for the glucose sensor; and (iii) the use of a smartphone to detect the change in thickness of the contact lens with no need for additional photo-sensors. This technique is promising for a noninvasive measurement of the glucose level and simple implementation of glucose sensing with a smartphone.

Recent Chemical Biology Approaches for Profiling Cell Surface Sialylation Status

Sialic acids (SAs) often exist as the terminal sugars of glycans of either glycoproteins or glycolipids on the cell surface and thus are directly involved in biological processes, such as cell-cell, cell-ligand, and cell-pathogen interactions. Cell surface SA expression levels and their linkages are collectively termed cell surface sialylation status, which represent varying cellular states and contribute to the overall functionality of a cell. Accordingly, systemic and specific profiling of the cell surface sialyation status is critical in deciphering the structures and functions of cell surface glycoconjugates and the molecular mechanisms of their underlying biological processes. In recent decades, several advanced chemical biology approaches have been developed to profile the cell surface sialyation status of both in vitro and in vivo samples, including metabolic labeling, direct chemical modification, and boronic acid coupling approaches. Various investigative technologies have also been explored for their unique competence, including fluorescent imaging, flow cytometry, Raman imaging, magnetic resonance imaging (MRI), and matrix-assisted laser desorption ionization imaging mass spectrometry. In particular, the sialylation status of a specific glycoprotein on the cell surface has been investigated. This review highlights the recent advancements in chemical biology approaches for profiling cell surface sialyation status. It is expected that this review will provide researchers different choices for both biological and biomedical research and applications.

Detecting live bacteria instantly utilizing AIE strategies

A new class of biosensor molecules evoking fluorescent emission by rotation-restricted binding with bacteria was examined for its applicability in detecting live bacteria instantly. The fluorogens possessed multiple tetraphenylethene (TPE)-cored boronic acids to oligomerize through complexation with cis-diols on bacterial surfaces, resulting in aggregation-induced emission (AIE). The fluorogen having two boronic acid units discriminated between live and dead bacteria by showing AIE activity only with the latter. Live bacteria were instantly detected by consequent treatment with reagents of three and four di-boronates (which showed AIE activity with both live and dead bacteria). This phenomenon may lead to a practical method for live bacteria detection.

Self-Regulated Carboxyphenylboronic Acid-Modified Mesoporous Silica Nanoparticles with "Touch Switch" Releasing Property for Insulin Delivery

Glucose-responsive insulin delivery systems, which can maintain a stable level of blood glucose, have been proposed as a promising method to treat diabetes. Such systems can reduce potential toxicity and enhance patient compliance compared to traditional therapies. Accordingly, we designed a mesoporous silica nanoparticle (MSN)-based glucose-sensitive and self-regulated drug release system to achieve the goal of long circulation and "touch switch" in vivo. In this system, carboxyphenylboronic acid (CPBA) was first modified on the surface of MSN using amidation reaction. Insulin (INS) was then loaded in the channels of MSN (CPBA-MSN/INS) through physical adsorption, and sodium alginate (SA) was introduced onto the surface of the CPBA-MSN/INS nanoparticles as the gatekeeper via amidation reaction (SA/CPBA-MSN/INS). We found the drug loading capacity of INS was 261 mg/g. In the normal range of blood glucose, INS was scarcely released due to the reversible covalent interaction between 1,2-diols of SA and CPBA. Within the high concentration of glucose, the boronate esters could be dissociated, which results in the mesoporous channels opening and the release of INS. In vivo experiments on diabetic mice showed SA/CPBA-MSN/INS sustained a normal blood glucose level for up to 12 h with a single dose. Moreover, the lipid metabolism disorder and organ damage of diabetic mice were alleviated after treatment with SA/CPBA-MSN/INS. Therefore, SA/CPBA-MSN/INS characterized by an "on-off" regulated drug release property and high biosafety shows promise for applications in diabetes treatment.

Tuning Electrochemiluminescence in Multistimuli Responsive Hydrogel Films

Luminescent and redox properties of stimuli-responsive hydrogel materials have been modulated by different external stimuli which trigger swelling or collapse of the polymer matrix. There is very rapid development in the field of such "smart" materials particularly combined with other sensing functionalities. Here, a poly(N-isopropylacrylamide) matrix incorporating covalently bound phenylboronic acids as a saccharide-sensing unit and redox-active [Ru(bpy)₃]²⁺ luminophores was designed and exhibited multistimuli responsive electrochemical and luminescent switching behaviors. Redox activity of the films is reversibly changed by sequential stimuli (fructose and temperature) which control the swelling and the collapse of the films. Finally, electrogenerated chemiluminescence (ECL) is enhanced by a ∼16-fold factor during the film collapse induced by the temperature, whereas the swelling due to fructose provokes the decrease of the light emission. We demonstrate for the first time that ECL response correlates intrinsically with the swelling ratio and is finely modulated by both stimuli. The multistimuli responsive characteristics of such ECL-active hydrogels should find promising applications in biosensing, new luminescent materials, and logic gates in bioelectronic devices.

Trio Act of Boronolectin with Antibiotic-Metal Complexed Macromolecules toward Broad-Spectrum Antimicrobial Efficacy

Bacterial infections, particularly by Gram-negative pathogens, have become a serious threat to global healthcare due to the diminishing effectiveness of existing antibiotics. We report a nontraditional therapy to combine three components in one macromolecular system, in which boronic acid adheres to peptidoglycan or lipopolysaccharide via boron-polyol based boronolectin chemistry, cationic metal polymer frameworks interact with negatively charged cell membranes, and β-lactam antibiotics are reinstated with enhanced vitality to attack bacteria via evading the detrimental enzyme-catalyzed hydrolysis. These macromolecular systems exhibited high efficacy in combating pathogenic bacteria, especially Gram-negative strains, due to synergistic effects of multicomponents on interactions with bacterial cells. In vitro and in vivo cytotoxicity and hemolysis evaluation indicated that these multifunctional copolymers did not induce cell death by apoptosis, as well as did not alter the phenotypes of immune cells and did not show observable toxic effect on red blood cells.

Anion and sugar recognition by 2,6-pyridinedicarboxamide bis-boronic acid derivatives

Two 2,6-pyridinedicarboxamide derivatives containing arylboronic acid fragments were prepared and fully characterized including X-ray crystal diffraction analysis of a pinacol ester. These compounds are potential bifunctional receptors for sugars and anions. Acid dissociation and stability constants for complexation of both receptors with glucose and fructose were determined by potentiometric titrations in aqueous DMSO. Also, binding of alizarin red S indicator was studied spectrophotometrically and a highly sensitive detection of fructose by an indicator displacement assay was proposed. Complexation with anions was studied by 1H NMR titrations in DMSO-d6. Binding of acetate anion occurs only via hydrogen bonding to OH groups of boronic acid fragments and does not affect signals of NH protons but chloride anion induces large shift of the signals of NH protons and small shifts of the signals of OH groups. This behavior makes possible anion discrimination based on preference in the type of binding site rather than simply on anion basicity as is typical for majority of neutral hydrogen bonding anion receptors.

Boron-based small molecules in disease detection and treatment (2013–2016)

Recent years have seen tremendous development in the design and synthesis of boron-based compounds as potential therapeutics and for detection applications. The present review highlights the most recent development of these boron-based small molecules, covering clinically used ixazomib, tavaborole, crisaborole and other molecules from 2013 to 2016.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Nanoparticles in Antiviral Therapy

In addition to general unavailability of specific antiviral therapeutics for a variety of viral diseases, usage of most antiviral drugs is linked to their limited solubility in aqueous media, short half-life time, and inadequate penetration to specified anatomic compartments. Accordingly, there is continuous effort to improve physicochemical characteristics of existing antiviral drugs. Since nanomaterials display remarkable physical and chemical properties, high surface area to volume ratio, and increased reactivity, new approaches for antiviral therapies include combinations of nanomaterials and current antiviral agents. Multivalent nanostructures, polymers, dendrimers, and liposomes can establish multivalent binding interactions with many biological systems and thus can target pathogenic interactions. There are reports about anitiviral activities of different metal nanoparticles, especially silver nanoparticles and their potential for treatment, prophylaxis, and control of viral infections. Integration of classic antiviral drugs, in the form of multiple ligands, onto nanostructures provides the advantages by creating a high local concentration of active molecules. This article will summarize the antiviral activity of different nanoparticle-based approaches currently available for the treatment of viral infections, and it will discuss metal nanoparticles as possible future antiviral drugs.

A novel probe based on phenylboronic acid functionalized carbon nanotubes for ultrasensitive carbohydrate determination in biofluids and semi-solid biotissues

An ultrasensitive SPME probe based on phenylboronic acid functionalized CNTs is applied for direct in vitro or in vivo recognition of carbohydrates in biofluids as well as semi-solid biotissues.

Carbohydrates are known to be involved in a wide range of biological and pathological processes. However, due to the presence of multiple hydroxyl groups, carbohydrate recognition is a particular challenge. Herein, we reported an ultrasensitive solid-phase microextraction (SPME) probe based on phenylboronic acid (PBA) functionalized carbon nanotubes (CNTs) for direct in vitro or in vivo recognition of carbohydrates in biofluids as well as semi-solid biotissues. The coating of the proposed probe possessed a 3D interconnected porous architecture formed by the stacking of CNTs. As a result, the binding capacity toward carbohydrates was excellent. The proposed approach was demonstrated to be much superior to most carbohydrate sensors, including higher sensitivity, wider linear range, and excellent qualitative ability in multi-carbohydrate systems. Thus, this approach opens up new avenues for the facile and efficient recognition of carbohydrates for important applications such as glycomics.

Nanostructures for the Inhibition of Viral Infections

Multivalent interactions are omnipresent in biology and confer biological systems with dramatically enhanced affinities towards different receptors. Such multivalent binding interactions have lately been considered for the development of new therapeutic strategies against bacterial and viral infections. Multivalent polymers, dendrimers, and liposomes have successfully targeted pathogenic interactions. While a high synthetic effort was often needed for the development of such therapeutics, the integration of multiple ligands onto nanostructures turned to be a viable alternative. Particles modified with multiple ligands have the additional advantage of creating a high local concentration of binding molecules. This review article will summarize the different nanoparticle-based approaches currently available for the treatment of viral infections.

Pattern recognition of monosaccharides via a virtual lectin array constructed by boronate affinity-based pH-featured encoding

Lectin array is an important tool in the fields of carbohydrate chemistry, glycobiology, and glycomics. Because natural lectins are associated with some apparent disadvantages such as tedious purification and easy loss of activity, artificial materials are applied to overcome such shortages by mimicking and replacing lectins in an artificial lectin array, among which boronate affinity-based materials are very outstanding and widely used. However, complicated synthetic works are often involved to design and create boronate affinity-based lectin-mimics. In this work, a facile and novel method was proposed to establish a virtual lectin array based on boronate affinity-based pH-featured encoding for discrimination of monosaccharides by pattern recognition. The dependence of boronate affinity on environmental pH was selected to encode each monosaccharide for feature generation, and the pH-featured encoding was used to construct the virtual lectin array. On the basis of the virtual array, pattern recognition algorithms were applied for data analysis. Monosaccharides were discriminated by principal component analysis, and the relations in the virtual lectin array were unraveled by cluster analysis. In this proof-of-concept work, without complicated synthesis or preparation, the proposed method was successful in mimicking lectin array and discriminating nine elementary monosaccharides found in nature, and it was also a new way of encoding in expanding the applications of boronate affinity-based materials and methods in the field of biomimetics.

Recognition of saccharides in the NIR region with a novel fluorogenic boronolectin: in vitro and live cell labeling

The detection performance in solution and in live cells of a novel mono-boronic acid derivative of a near-infrared luminescent tricarbocyanine with OFF–ON response upon addition of saccharides.

A facile strategy to fabricate glucose-responsive vesicles via a template of thermo-sensitive micelles

Polymer vesicles fabricated based on the complexation between PBA- and GA containing block copolymers exhibited glucose-responsiveness at physiological pH.

Surface-enhanced Raman scattering behaviour of 4-mercaptophenyl boronic acid on assembled silver nanoparticles

SERS properties of 4-mercaptophenylboronic acid (4-MPBA) on AgNPs were studied systematically; a self-condensation reaction of 4-MPBA, competitor of the binding of glucose, was found to preferentially happen at higher pH values.

Fructose controlled ionophoric activity of a cholate-boronic acid

Wulff-type boronic acids have been shown to act as ionophores at pH 8.2 by transporting Na(+) through phospholipid bilayers. A cholate-boronic acid conjugate was synthesised and shown to be an ionophore, although the hydroxyl-lined face of the cholate moiety did not enhance ion transport. Mechanistic studies suggested a carrier mechanism for Na(+) transport. The addition of fructose (>5 mM) strongly inhibited ionophoric activity of the cholate-boronic acid conjugate, mirrored by a strong decrease in the ability of this compound to partition into an organic phase. Modelling of the partitioning and ion transport data, using a fructose/boronic acid binding constant measured at pH 8.2, showed a good correlation with the extent of fructose/boronic acid complexation and suggested high polarity fructose/boronic acid complexes are poor ionophores. The sensitivity of ion transport to fructose implies that boronic acid-based antibiotic ionophores with activity modulated by polysaccharides in the surrounding environment may be accessible.