Design of an amphiphilic polymer for nanoparticle coating and functionalization

NIR-II light powered hydrogel nanomotor for intravesical instillation with enhanced bladder cancer therapy

Intravesical instillation is the common therapeutic strategy for bladder cancer. Besides chemo drugs, nanoparticles are used as intravesical instillation reagents, offering appealing therapeutic approaches for bladder cancer treatment. Metal oxide nanoparticle based chemodynamic therapy (CDT) converts tumor intracellular hydrogen peroxide to ROS with cancer cell-specific toxicity, which makes it a promising approach for the intravesical instillation of bladder cancer. However, the limited penetration of nanoparticle based therapeutic agents into the mucosa layer of the bladder wall poses a great challenge for the clinical application of CDT in intravesical instillation. Herein, we developed a 1064 nm NIR-II light driven hydrogel nanomotor for the CDT for bladder cancer via intravesical instillation. The hydrogel nanomotor was synthesized via microfluidics, wrapped with a lipid bilayer, and encapsulates CuO2 nanoparticles as a CDT reagent and core-shell structured Fe3O4@Cu9S8 nanoparticles as a fuel reagent with asymmetric distribution in the nanomotor (LipGel-NM). An NIR-II light irradiation of 1064 nm drives the active motion of LipGel-NMs, thus facilitating their distribution in the bladder and deep penetration into the mucosa layer of the bladder wall. After FA-mediated endocytosis in bladder cancer cells, CuO2 is released from LipGel-NMs due to the acidic intracellular environment for CDT. The NIR-II light powered active motion of LipGel-NMs effectively enhances CDT, providing a promising strategy for bladder cancer therapy.

Encapsulation of Nanoparticles with Statistical Copolymers with Different Surface Charges and Analysis of Their Interactions with Proteins and Cells

Encapsulation with polymers is a well-known strategy to stabilize and functionalize nanomaterials and tune their physicochemical properties. Amphiphilic copolymers are promising in this context, but their structural diversity and complexity also make understanding and predicting their behavior challenging. This is particularly the case in complex media which are relevant for intended applications in medicine and nanobiotechnology. Here, we studied the encapsulation of gold nanoparticles and quantum dots with amphiphilic copolymers differing in their charge and molecular structure. Protein adsorption to the nanoconjugates was studied with fluorescence correlation spectroscopy, and their surface activity was studied with dynamic interfacial tensiometry. Encapsulation of the nanoparticles without affecting their characteristic properties was possible with all tested polymers and provided good stabilization. However, the interaction with proteins and cells significantly depended on structural details. We identified statistical copolymers providing strongly reduced protein adsorption and low unspecific cellular uptake. Interestingly, different zwitterionic amphiphilic copolymers showed substantial differences in their resulting bio-repulsive properties. Among the polymers tested herein, statistical copolymers with sulfobetaine and phosphatidylcholine sidechains performed better than copolymers with carboxylic acid- and dimethylamino-terminated sidechains.

Benzoxaborole-grafted high molecular weight chitosan from prawn: Synthesis, characterization, target recognition and antibacterial properties

Boronated polymers are in the focus of dynamic functional materials due to the versatility of the B-O interactions and accessibility of precursors. Polysaccharides are highly biocompatible, and therefore, an attractive platform for anchoring boronic acid groups for further bioconjugation of cis-diol containing molecules. We report for the first time the introduction of benzoxaborole by amidation of the amino groups of chitosan improving solubility and introducing cis-diol recognition at physiological pH. The chemical structures and physical properties of the novel chitosan-benzoxaborole (CS-Bx) as well as two phenylboronic derivatives synthesized for comparison, were characterized by nuclear magnetic resonance (NMR), infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic light scattering (DLS), rheology and optical spectroscopic methods. The novel benzoxaborole grafted chitosan was perfectly solubilized in an aqueous buffer at physiological pH, extending the possibilities of boronated materials derived from polysaccharides. The dynamic covalent interaction between boronated chitosan and model affinity ligands, was studied by means of spectroscopy methods. A glycopolymer derived from poly(isobutylene-alt-anhydride) was also synthesized to study the formation of dynamic assemblies with benzoxaborole-grafted chitosan. A first approximation to apply fluorescence microscale thermophoresis for the interactions of the modified polysaccharide is also discussed. Additionally, the activity of CSBx against bacterial adhesion was studied.

Bilayer-Coating Strategy for Hydrophobic Nanoparticles Providing Colloidal Stability, Functionality, and Surface Protection in Biological Media

The surface chemistry of nanoparticles is a key step on the pathway from particle design towards applications in biologically relevant environments. Here, a bilayer-based strategy for the surface modification of hydrophobic nanoparticles is introduced that leads to excellent colloidal stability in aqueous environments and good protection against disintegration, while permitting surface functionalization via simple carbodiimide chemistry. We have demonstrated the excellent potential of this strategy using upconversion nanoparticles (UCNPs), initially coated with oleate and therefore dispersible only in organic solvents. The hydrophobic oleate capping is maintained and a bilayer is formed upon addition of excess oleate. The bilayer approach renders protection towards luminescence loss by water quenching, while the incorporation of additional molecules containing amino functions yields colloidal stability and facilitates the introduction of functionality. The biological relevance of the approach was confirmed with the use of two model dyes, a photosensitizer and a nitric oxide (NO) probe that, when attached to the surface of the UCNPs, retained their functionality to produce singlet oxygen and detect intracellular NO, respectively. We present a simple and fast strategy to protect and functionalize inorganic nanoparticles in biological media, which is important for controlled surface engineering of nanosized materials for theranostic applications.

Are nanoplastics potentially toxic for plants and rhizobiota? Current knowledge and recommendations

Soil is now becoming a reservoir of plastics in response to global production, use/disposal patterns and low recovery rates. Their degradation is caused by numerous processes, and this degradation leads to the formation and release of plastic nanoparticles, i.e., nanoplastics. The occurrence of nanoplastics in the soil is expected to both directly and indirectly impact its properties and functioning. Nanoplastics may directly impact the physiology and development of living organisms, especially plants, e.g., by modifying their production yield. Nanoplastics can also indirectly modify the physicochemical properties of the soil and, as a result, favour the release of related contaminants (organic or inorganic) and have an impact on soil biota, and therefore have a negative effect on the functioning of rhizospheres. However all these results have to be taken carefully since performed with polymer nano-bead not representative of the nanoplastics observed in the environment. This review highlight thus the current knowledge on the interactions between plants, rhizosphere and nanoplastics, their consequences on plant physiology and development in order to identify gaps and propose scientific recommendations.

Preparation of Selenium-Based Drug-Modified Polymeric Ligand-Functionalised Fe3O4 Nanoparticles as Multimodal Drug Carrier and Magnetic Hyperthermia Inductor

In recent years, much effort has been invested into developing multifunctional drug delivery systems to overcome the drawbacks of conventional carriers. Magnetic nanoparticles are not generally used as carriers but can be functionalised with several different biomolecules and their size can be tailored to present a hyperthermia response, allowing for the design of multifunctional systems which can be active in therapies. In this work, we have designed a drug carrier nanosystem based on Fe₃O₄ nanoparticles with large heating power and 4-amino-2-pentylselenoquinazoline as an attached drug that exhibits oxidative properties and high selectivity against a variety of cancer malignant cells. For this propose, two samples composed of homogeneous Fe₃O₄ nanoparticles (NPs) with different sizes, shapes, and magnetic properties have been synthesised and characterised. The surface modification of the prepared Fe₃O₄ nanoparticles has been developed using copolymers composed of poly(ethylene-alt-maleic anhydride), dodecylamine, polyethylene glycol and the drug 4-amino-2-pentylselenoquinazoline. The obtained nanosystems were properly characterised. Their in vitro efficacy in colon cancer cells and as magnetic hyperthermia inductors was analysed, thereby leaving the door open for their potential application as multimodal agents.

Long-term retention of gold nanoparticles in the liver is not affected by their physicochemical characteristics

Gold nanoparticles (GNPs) are considered promising candidates for healthcare applications, however, their toxicity after long-term exposure to the material remains uncertain. Since the liver is the main filter organ for nanomaterials, this work was aimed at evaluating hepatic accumulation, internalisation and overall safety of well-characterised and endotoxin-free GNPs in healthy mice from 15 minutes to 7 weeks after a single administration. Our data demonstrate that GNPs were rapidly segregated into lysosomes of endothelial cells (LSEC) or Kupffer cells regardless of coating or shape but with different kinetics. Despite the long-lasting accumulation in tissues, the safety of GNPs was confirmed by liver enzymatic levels, as they were rapidly eliminated from the blood circulation and accumulated in the liver without inducing hepatic toxicity. Our results demonstrate that GNPs have a safe and biocompatibile profile despite their long-term accumulation.

Surface plasmon coupling effects on the photon color conversion behaviors of colloidal quantum dots in a GaN nanoscale hole with a nearby quantum-well structure

To improve color conversion performance for color display application, we study the near-field-induced nanoscale-cavity effects on the emission efficiency and Förster resonance energy transfer (FRET) under the condition of surface plasmon (SP) coupling by inserting colloidal quantum dots (QDs) and synthesized Ag nanoparticles (NPs) into surface nano-holes fabricated on a GaN template and an InGaN/GaN quantum-well (QW) template. In the QW template, the inserted Ag NPs are close to either QWs or QDs for producing three-body SP coupling to enhance color conversion. Time-resolved and continuous-wave photoluminescence (PL) behaviors of the QW- and QD-emitting lights are investigated. The comparison between the nano-hole samples and the reference samples of surface QD/Ag NP shows that the nanoscale-cavity effect of the nano-hole leads to the enhancements of QD emission, FRET between QDs, and FRET from QW into QD. The SP coupling induced by the inserted Ag NPs can enhance the QD emission and FRET from QW into QD. Its result is further enhanced through the nanoscale-cavity effect. The relative continuous-wave PL intensities among different color components also show the similar behaviors. By introducing SP coupling to a color conversion device with the FRET process in a nanoscale cavity structure, we can significantly improve the color conversion efficiency. Simulation results confirm the basic observations in experiment.

Variations in Biodistribution and Acute Response of Differently Shaped Titania Nanoparticles in Healthy Rodents

Titanium dioxide nanoparticles (TiO₂ NPs) are one of the main sources of the nanoparticulate matter exposure to humans. Although several studies have demonstrated their potential toxic effects, the real nature of the correlation between NP properties and their interaction with biological targets is still far from being fully elucidated. Here, engineered TiO₂ NPs with various geometries (bipyramids, plates, and rods) have been prepared, characterized and intravenously administered in healthy mice. Parameters such as biodistribution, accumulation, and toxicity have been assessed in the lungs and liver. Our data show that the organ accumulation of TiO₂ NPs, measured by ICP-MS, is quite low, and this is only partially and transiently affected by the NP geometries. The long-lasting permanence is exclusively restricted to the lungs. Here, bipyramids and plates show a higher accumulation, and interestingly, rod-shaped NPs are the most toxic, leading to histopathological pulmonary alterations. In addition, they are also able to induce a transient increase in serum markers related to hepatocellular injury. These results indicate that rods, more than bipyramidal and spherical geometries, lead to a stronger and more severe biological effect. Overall, small physico-chemical differences can dramatically modify both accumulation and safety.

Controlling self-assembling co-polymer coatings of hydrophilic polysaccharide substrates via co-polymer block length ratio

HYPOTHESIS

The degree of polymerization of amphiphilic di-block co-polymers, which can be varied with ease in computer simulations, provides a means to control self-assembling di-block co-polymer coatings on hydrophilic substrates.

SIMULATIONS

We examine self-assembly of linear amphiphilic di-block co-polymers on hydrophilic surface via dissipative particle dynamics simulations. The system models a glucose based polysaccharide surface on which random co-polymers of styrene and n-butyl acrylate, as the hydrophobic block, and starch, as the hydrophilic block, forms a film. Such setups are common in e.g. hygiene, pharmaceutical, and paper product applications.

FINDINGS

Variation of the block length ratio (35 monomers in total) reveals that all examined compositions readily coat the substrate. However, strongly asymmetric block co-polymers with short hydrophobic segments are best in wetting the surface, whereas approximately symmetric composition leads to most stable films with highest internal order and well-defined internal stratification. At intermediate asymmetries, isolated hydrophobic domains form. We map the sensitivity and stability of the assembly response for a large variety of interaction parameters. The reported response persists for a wide polymer mixing interactions range, providing general means to tune surface coating films and their internal structure, including compartmentalization.

Quantitative Comparison of Gold Nanoparticle Delivery via the Enhanced Permeation and Retention (EPR) Effect and Mesenchymal Stem Cell (MSC)-Based Targeting

There are still some gaps in existing knowledge in the field of cancer nanotheranostics, e.g., the efficiency of nanoparticle-loaded cells for targeted delivery. In the current study, gold nanoparticles (Au NPs) were delivered to tumors in both subcutaneous tumor and lung metastasis tumor models by intravenous injection of either free Au NPs or of human bone marrow mesenchymal stem cells (MSCs), which were loaded with endocytosed Au NPs. By making injections with the same dose of administrated Au NPs, it was possible to directly compare tumor targeting of both delivery modes. Hereby, the passive targeting of tumor by the plain Au NPs was facilitated by the enhanced permeation and retention (EPR) effect. Au NP retention by tumors, as well as tumor penetration, were found to be improved up to 2.4-to-9.3-fold when comparing the MSC-mediated delivery of Au NPs to the delivery of the plain Au NPs via EPR effect on day 7 post administration. While the absolute retention of Au NPs in the tumor remained low, our data show that, upon injection of the same amount of Au NPs, in fact MSC-mediated delivery is quantitatively higher than EPR-mediated delivery of NPs by half an order of magnitude.

Photon color conversion enhancement of colloidal quantum dots inserted into a subsurface laterally-extended GaN nano-porous structure in an InGaN/GaN quantum-well template

To improve the color conversion performance, we study the nanoscale-cavity effects on the emission efficiency of a colloidal quantum dot (QD) and the Förster resonance energy transfer (FRET) from quantum well (QW) into QD in a GaN porous structure (PS). For this study, we insert green-emitting QD (GQD) and red-emitting QD (RQD) into the fabricated PSs in a GaN template and a blue-emitting QW template, and investigate the behaviors of the photoluminescence (PL) decay times and the intensity ratios of blue, green, and red lights. In the PS samples fabricated on the GaN template, we observe the efficiency enhancements of QD emission and the FRET from GQD into RQD, when compared with the samples of surface QDs, which is attributed to the nanoscale-cavity effect. In the PS samples fabricated on the QW template, the FRET from QW into QD is also enhanced. The enhanced FRET and QD emission efficiencies in a PS result in an improved color conversion performance. Because of the anisotropic PS in the sample surface plane, the polarization dependencies of QD emission and FRET are observed.

NIR-II Light Powered Asymmetric Hydrogel Nanomotors for Enhanced Immunochemotherapy

Nanomotors are appealing drug carriers, and the strength of the propelling force is important for their motion capability. Though high motion efficiency has been achieved with 808 nm light driven Janus-structured noble metal nanomotors, the NIR-I light penetration depth and material biocompatibility limit their broad application. Herein, we develop a 1064 nm NIR-II light driven asymmetric hydrogel nanomotor (AHNM) with high motion capability and load it with doxorubicin for enhanced immunochemotherapy. Magnetic field assisted photopolymerization generates an asymmetric distribution of Fe₃ O₄ @Cu₉ S₈ nanoparticles in the AHNM, producing self-thermophoresis as driving force under NIR-II irradiation. The AHNM is also functionalized with dopamine for the capture and retention of tumor-associated antigens to boost immune activation. The as-obtained NIR-II light driven AHNM has a high tumor tissue penetration capability and enhances immunochemotherapy, providing a promising strategy for cancer therapy.

Effects of Surface Plasmon Coupling on the Color Conversion of an InGaN/GaN Quantum-Well Structure into Colloidal Quantum Dots Inserted into a Nearby Porous Structure

To further enhance the color conversion from a quantum-well (QW) structure into a color-converting colloidal quantum dot (QD) through Förster resonance energy transfer (FRET), we designed and implemented a device structure with QDs inserted into a GaN nano-porous structure near the QWs to gain the advantageous nanoscale-cavity effect. Additionally, surface Ag nanoparticles were deposited for inducing surface plasmon (SP) coupling with the QW structure. Based on the measurements of time-resolved and continuous-wave photoluminescence spectroscopies, the FRET efficiency from QW into QD is enhanced through the SP coupling. In particular, performance in the polarization perpendicular to the essentially extended direction of the fabricated pores in the nano-porous structure is more strongly enhanced when compared with the other linear polarization. A numerical simulation study was undertaken, and showed consistent results with the experimental observations.

One-Step Ligand-Exchange Method to Produce Quantum Dot-DNA Conjugates for DNA-Directed Self-Assembly

To address the current challenges in making bright, stable, and small DNA-functionalized quantum dots (QDs), we have developed a one-step ligand-exchange method to produce QD-DNA conjugates from commonly available hydrophobic QDs. We show that by systematically adjusting the reaction conditions such as ligand-to-nanoparticle molar ratio, pH, and solvent composition, stable and highly photoluminescent water-soluble QD-DNA conjugates with relatively high ligand loadings can be produced. Moreover, by site specifically binding these QD-DNA conjugates to a DNA origami template, we demonstrate that these bioconjugates have sufficient colloidal stability for DNA-directed self-assembly. Fluorescence quenching by an adjacent gold nanoparticle (AuNP) was demonstrated. Such QD-AuNP dimers may serve as biosensors with improved sensitivity and reproducibility. Moreover, our simple method can facilitate the assembly of QDs into more complex superlattices and discrete clusters that may enable novel photophysical properties.

Magnetoelectric core-shell CoFe2O4@BaTiO3 nanorods: their role in drug delivery and effect on multidrug resistance pump activity in vitro

Nanoparticle mediated targeted drug delivery has become a widespread area of cancer research to address premature drug delivery problems. We report the synthesis of magneto-electric (ME) core-shell cobalt ferrite-barium titanate nanorods (CFO@BTO NRs) to achieve "on demand" drug release in vitro. Physical characterizations confirmed the formation of pure CFO@BTO NRs with appropriate magnetic and ferroelectric response, favorable for an externally controlled drug delivery system. Functionalization of NRs with doxorubicin (DOX) and methotrexate (MTX) achieved up to 98% drug release in 20 minutes, under a 4 mT magnetic field (MF). We observed strong MF and dose dependent cytotoxic response in HepG2 and HT144 cells and 3D spheroid models (p < 0.05). Cytotoxicity was characterized by enhanced oxidative stress, causing p53 mediated cell cycle arrest, DNA damage and cellular apoptosis via downregulation of Bcl-2 expression. In addition, MF and dose dependent inhibition of Multidrug Resistance (MDR) pump activity was also observed (p < 0.05) indicating effectivity in chemo-resistant cancers. Hence, CFO@BTO NRs represent an efficient carrier system for controlled drug delivery in cancer nanotherapeutics, where higher drug uptake is a prerequisite for effective treatment.

Nanoscale-cavity enhancement of color conversion with colloidal quantum dots embedded in the surface nano-holes of a blue-emitting light-emitting diode

Although the method of inserting colloidal quantum dots (QDs) into deep nano-holes fabricated on the top surface of a light-emitting diode (LED) has been widely used for producing effective Förster resonance energy transfer (FRET) from the LED quantum wells (QWs) into the QDs to enhance the color conversion efficiency, an important mechanism for enhancing energy transfer in such an LED structure was overlooked. This mechanism, namely, the nanoscale-cavity effect, represents a near-field Purcell effect and plays a crucially important role in enhancing the color conversion efficiency. Here, we demonstrate the results of LED performance, time-resolved photoluminescence (TRPL), and numerical simulation to elucidate the nanoscale-cavity effect on color conversion by inserting a photoresist solution of red-emitting QDs into the nano-holes fabricated on a blue-emitting QW LED. Based on the TRPL study of the inserted QDs in a nano-hole structure fabricated on an un-doped GaN template of no QW, it is found that the emission efficiency of the inserted QDs is significantly increased due to the nanoscale-cavity effect. From the simulation study, it is confirmed that this effect can also increase the FRET efficiency, particularly for those radiating dipoles in the QWs oriented perpendicular to the sidewalls of the nano-holes. In the nanoscale-cavity effect, the enhanced near field distribution inside a nano-hole excited by a light emitter modifies its own radiation behavior through the Purcell effect such that its far-field emission becomes stronger.

Fluorescent Nanoparticles for Super-Resolution Imaging

Super-resolution imaging techniques that overcome the diffraction limit of light have gained wide popularity for visualizing cellular structures with nanometric resolution. Following the pace of hardware developments, the availability of new fluorescent probes with superior properties is becoming ever more important. In this context, fluorescent nanoparticles (NPs) have attracted increasing attention as bright and photostable probes that address many shortcomings of traditional fluorescent probes. The use of NPs for super-resolution imaging is a recent development and this provides the focus for the current review. We give an overview of different super-resolution methods and discuss their demands on the properties of fluorescent NPs. We then review in detail the features, strengths, and weaknesses of each NP class to support these applications and provide examples from their utilization in various biological systems. Moreover, we provide an outlook on the future of the field and opportunities in material science for the development of probes for multiplexed subcellular imaging with nanometric resolution.

Specific immunosuppressive role of nanodrugs targeting calcineurin in innate myeloid cells

Calcineurin (CN) inhibitors currently used to avoid transplant rejection block the activation of adaptive immune responses but also prevent the development of tolerance toward the graft, by directly inhibiting T cells. CN, through the transcription factors of the NFAT family, plays an important role also in the differentiation dendritic cells (DCs), the main cells responsible for the activation of T lymphocytes. Therefore, we hypothesized that the inhibition of CN only in DCs and not in T cells could be sufficient to prevent T cell responses, while allowing for the development of tolerance. Here, we show that inhibition of CN/NFAT pathway in innate myeloid cells, using a new nanoconjugate capable of selectively targeting phagocytes in vivo, protects against graft rejection and induces a longer graft acceptance compared to common CN inhibitors. We propose a new generation of nanoparticles-based selective immune suppressive agents for a better control of transplant acceptance.

•

Calcineurin/NFATc2 pathway is required to enable DC migration to draining lymph nodes

•

Calcineurin/NFATc2 pathway in DCs is required for type I immune responses activation

•

Superparamagnetic iron oxide NPs can be used to efficiently target phagocytes in vivo

•

Specific delivery of calcineurin inhibitor by NPs to phagocytes induce graft acceptance

Construction and Evaluation of Traceable rhES-QDs-M-MS Protein Delivery System: Sustained-Release Properties, Targeted Effect, and Antitumor Activity

Recombinant human endostatin (rhES) is a protein drug with poor stability and short in vivo circulation time. The present study was therefore aimed at developing sustained-release lung targeted microspheres drug delivery system and evaluating its targeting efficiency using in vivo imaging techniques with quantum dots (QDs) as the imaging material. The oil-soluble QDs were coated with amphiphilic polymers to obtain a polymer-quantum dots micelle (QDs-M) with the potential to stably disperse in water. The rhES and QDs-M were combined using covalent bonds. The rhES-QDs-M microspheres (rhES-QDs-M-MS) were prepared using electrostatic spray technology and also evaluated via in vivo imaging techniques. The pharmacodynamics was further studied in mice. The rhES-QDs-M-MS (4-8 μm) were stable in an aqueous medium with good optical properties. The in vitro studies showed that the rhES-QDs-M-MS had sustained release which was maintained for at least 15 days (cumulative release >80%) without any burst release. The rhES-QDs-M-MS had a very high safety profile and also effectively inhibited the in vitro proliferation of human umbilical vein endothelial cells by about 70%. The pharmacokinetic results showed that the rhES could still be detected at 72 h in the experimental group which meant that the rhES-QDs-M-MS had a significant sustained-release effect. The rhES-QDs-M-MS had a better lung targeting effect and higher antitumor activity compared with the rhES. The traceable rhES-QDs-M-MS served as a promising drug delivery system for the poorly stable rhES proteins and significantly increased its lung-targeted effect, sustained-release properties, and antitumor activities.

2D Covalent Organic Framework Direct Osteogenic Differentiation of Stem Cells

2D covalent organic frameworks (COFs) are an emerging class of crystalline porous organic polymers with a wide-range of potential applications. However, poor processability, aqueous instability, and low water dispersibility greatly limit their practical biomedical implementation. Herein, a new class of hydrolytically stable 2D COFs for sustained delivery of drugs to direct stem cell fate is reported. Specifically, a boronate-based COF (COF-5) is stabilized using amphiphilic polymer Pluronic F127 (PLU) to produce COF-PLU nanoparticles with thickness of ≈25 nm and diameter ≈200 nm. These nanoparticles are internalized via clathrin-mediated endocytosis and have high cytocompatibility (half-inhibitory concentration ≈1 mg mL^-1 ). Interestingly, the 2D COFs induce osteogenic differentiation in human mesenchymal stem cells, which is unique. In addition, an osteogenic agent-dexamethasone-is able to be loaded within the porous structure of COFs for sustained delivery which further enhances the osteoinductive ability. These results demonstrate for the first time the fabrication of hydrolytically stable 2D COFs for sustained delivery of dexamethasone and demonstrate its osteoinductive characteristics.

Development of amyloid beta gold nanorod aggregates as optoacoustic probes

Propagation of small amyloid beta (Aβ) aggregates (or seeds) has been suggested as a potential mechanism of Alzheimer’s disease progression. Monitoring the propagation of Aβ seeds in an organism would enable testing of this hypothesis and, if confirmed, provide mechanistic insights. This requires a contrast agent for long-term tracking of the seeds. Gold nanorods combine several attractive features for this challenging task, in particular, their strong absorbance in the infrared (enabling optoacoustic imaging) and the availability of several established protocols for surface functionalisation. In this work, polymer-coated gold nanorods were conjugated with anti-Aβ antibodies and attached to pre-formed Aβ seeds. The resulting complexes were characterised for their optical properties by UV/Vis spectroscopy and multispectral optoacoustic tomography. The complexes retained their biophysical properties, i.e. their ability to seed Aβ fibril formation. They remained stable in biological media for at least 2 days and showed no toxicity to SH-SY5Y neuroblastoma cells up to 1.5 nM and 6 μM of gold nanorods and Aβ seeds, respectively. Taken together, this study describes the first steps in the development of probes for monitoring the spread of Aβ seeds in animal models.

Enhancement of the Modulation Response of Quantum-Dot-Based Down-Converted Light through Surface Plasmon Coupling

In this paper, we first elaborate on the effects of surface plasmon (SP) coupling on the modulation responses of the emission of a light-emitting diode (LED) and its down-converted lights through colloidal quantum dots (QDs). The results of our past efforts for this subject are briefly discussed. The discussions lay the foundation for the presentation of the new experimental data of such down-converted lights in this paper. In particular, the enhancement of the modulation bandwidth (MB) of a QD-based converted light through SP coupling is demonstrated. By linking green-emitting QDs (GQDs) and/or red-emitting QDs (RQDs) with synthesized Ag nano-plates via surface modifications and placing them on a blue-emitting LED, the MBs of the converted green and red emissions are significantly increased through the induced SP coupling of the Ag nano-plates. When both GQD and RQD exist and are closely spaced in a sample, the energy transfer processes of emission-reabsorption and Förster resonance energy transfer from GQD into RQD occur, leading to the increase (decrease) in the MB of green (red) light. With SP coupling, the MB of a mixed light is significantly enhanced.

Towards the design of contrast-enhanced agents: systematic Ga3+ doping on magnetite nanoparticles

The main objective of the preparation of the Fe_3-xGa_xO₄ (0.14 ≤ x ≤ 1.35) system was to further the knowledge of the magnetic response of Ga³⁺-doped magnetite for application as MRI contrast agents. With this purpose, monodisperse nanoparticles between 7 and 10 nm with different amounts of gallium were prepared from an optimized protocol based on thermal decomposition of metallo-organic precursors. Thorough characterization of the sample was conducted in order to understand the influence of gallium doping on the structural, morphological and magnetic properties of the Fe_3-xGa_xO₄ system. X-ray diffraction and X-ray absorption near-edge structure measurements have proved the progressive incorporation of Ga in the spinel structure, with different occupations in both tetrahedral and octahedral sites. Magnetization measurements as a function of field temperature have shown a clear dependence of magnetic saturation on the gallium content, reaching an M_s value of 110 Am² kg^-1 at 5 K for x = 0.14 (significantly higher than bulk magnetite) and considerably decreasing for amounts above x = 0.57 of gallium. For this reason, nanoparticles with moderate Ga quantities were water-transferred by coating them with the amphiphilic polymer PMAO to further analyse their biomedical potential. Cytotoxicity assays have demonstrated that Fe_3-xGa_xO₄@PMAO formulations with x ≤ 0.57, which are the ones with better magnetic response, are not toxic for cells. Finally, the effect of gallium doping on relaxivities has been analysed by measuring longitudinal (T₁^-1) and transverse (T₁^-1) proton relaxation rates at 1.4 T revealing that nanoparticles with x = 0.14 Ga³⁺ content present remarkable T₂ contrast and the nanoparticles with x = 0.26 have great potential to act as dual T₁-T₂ contrast agents.

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

In this study, poly(isobutylene-alt-maleic anhydride) (PMA)-coated spinel ferrite (MFe2O4, where M = Fe, Co, Ni, or Zn) nanoparticles (NPs) were developed as carriers of the anticancer drugs doxorubicin (DOX) and methotrexate (MTX). Physical characterizations confirmed the formation of pure cubic structures (14-22 nm) with magnetic properties. Drug-loaded NPs exhibited tumor specificity with significantly higher (p < 0.005) drug release in an acidic environment (pH 5.5). The nanoparticles were highly colloidal (zeta potential = -35 to -26 mV) in deionized water, phosphate buffer saline (PBS), and sodium borate buffer (SBB). They showed elevated and dose-dependent cytotoxicity in vitro compared to free drug controls. The IC50 values ranged from 0.81 to 3.97 μg/mL for HepG2 and HT144 cells, whereas IC50 values for normal lymphocytes were 10 to 35 times higher (18.35-43.04 µg/mL). Cobalt ferrite (CFO) and zinc ferrite (ZFO) NPs were highly genotoxic (p < 0.05) in cancer cell lines. The nanoparticles caused cytotoxicity via oxidative stress, causing DNA damage and activation of p53-mediated cell cycle arrest (significantly elevated expression, p < 0.005, majorly G1 and G2/M arrest) and apoptosis. Cytotoxicity testing in 3D spheroids showed significant (p < 0.05) reduction in spheroid diameter and up to 74 ± 8.9% of cell death after two weeks. In addition, they also inhibited multidrug resistance (MDR) pump activity in both cell lines suggesting effectivity in MDR cancers. Among the tested MFe2O4 NPs, CFO nanocarriers were the most favorable for targeted cancer therapy due to excellent magnetic, colloidal, cytotoxic, and biocompatible aspects. However, detailed mechanistic, in vivo cytotoxicity, and magnetic-field-assisted studies are required to fully exploit these nanocarriers in therapeutic applications.

Emerging Application of Magnetic Nanoparticles for Diagnosis and Treatment of Cancer

Cancer is a disease that has resulted in millions of deaths worldwide. The current conventional therapies utilized for the treatment of cancer have detrimental side effects. This led scientific researchers to explore new therapeutic avenues with an improved benefit to risk profile. Researchers have found nanoparticles, particles between the 1 and 100 nm range, to be encouraging tools in the area of cancer. Magnetic nanoparticles are one of many available nanoparticles at present. Magnetic nanoparticles have increasingly been receiving a considerable amount of attention in recent years owing to their unique magnetic properties, among many others. Magnetic nanoparticles can be controlled by an external magnetic field, signifying their ability to be site specific. The most popular approaches for the synthesis of magnetic nanoparticles are co-precipitation, thermal decomposition, hydrothermal, and polyol synthesis. The functionalization of magnetic nanoparticles is essential as it significantly increases their biocompatibility. The most utilized functionalization agents are comprised of polymers. The synthesis and functionalization of magnetic nanoparticles will be further explored in this review. The biomedical applications of magnetic nanoparticles investigated in this review are drug delivery, magnetic hyperthermia, and diagnosis. The diagnosis aspect focuses on the utilization of magnetic nanoparticles as contrast agents in magnetic resonance imaging. Clinical trials and toxicology studies relating to the application of magnetic nanoparticles for the diagnosis and treatment of cancer will also be discussed in this review.

Dual Targeting with Cell Surface Electrical Charge and Folic Acid via Superparamagnetic Fe3O4@Cu2-xS for Photothermal Cancer Cell Killing

Simple Summary

There are two critical issues in cancer hyperthermia: (1) photothermal effect and (2) cancer cell targeting efficiency. While the former can be addressed by rendering the nano carriers with significant IR absorptions, the latter is dealt with using a novel dual-targeting strategy. In this study, the Fe₃O₄ nanoparticle was coated with a shell of Cu_2–xS; the resulting Fe₃O₄@Cu_2–xS exhibited strong IR absorption for enhanced photothermal cancer cell killing. The Fe₃O₄@Cu_2–xS nanoparticles are surface functionalized with amphiphilic polyethylenimine (LA-PEI) and Folic acid-TPGS (FA-TPGS) for two purposes: (1) the PEI surface coating renders the particles positively charged, enabling them to effectively bind with negatively-charged cancer cells for more intimate nano/bio contact resulting in much stronger cancer cell ablation; (2) the folic acid modification further increases the targeting efficiency via the folic receptors on the cancer cell surface. Dual-targeting with the surface electrical charge and the tumor-specific folic acid synergistically facilitates both passive and active targeting for significantly improved photothermal killing.

Abstract

A major challenge in cancer therapy is to achieve high cell targeting specificity for the highest therapeutic efficacy. Two major approaches have been shown to be quite effective, namely, (1) bio-marker mediated cell targeting, and (2) electrical charge driven cell binding. The former utilizes the tumor-specific moieties on nano carrier surfaces for active targeting, while the latter relies on nanoparticles binding onto the cancer cell surfaces due to differences in electrical charge. Cancer cells are known for their hallmark metabolic pattern: high rates of glycolysis that lead to negatively charged cell surfaces. In this study, the nanoparticles of Fe₃O₄@Cu_2–xS were rendered positively charged by conjugating their surfaces with different functional groups for strong electrostatic binding onto the negatively-charged cancer cells. In addition to the positively charged surfaces, the Fe₃O₄@Cu_2–xS nanoparticles were also modified with folic acid (FA) for biomarker-based cell targeting. The dual-targeting approach synergistically utilizes the effectiveness of both charge- and biomarker-based cell binding for enhanced cell targeting. Further, these superparamagnetic Fe₃O₄@Cu_2–xS nanoparticles exhibit much stronger IR absorptions compared to Fe₃O₄, therefore much more effective in photothermal therapy.

Aerogelation of Polymer-Coated Photoluminescent, Plasmonic, and Magnetic Nanoparticles for Biosensing Applications

Macroscopic materials with nanoscopic properties have recently been synthesized by self-assembling defined nanoparticles to form self-supported networks, so-called aerogels. Motivated by the promising properties of this class of materials, the search for versatile routes toward the controlled assembly of presynthesized nanoparticles into such ultralight macroscopic materials has become a great interest. Overcoating procedures of colloidal nanoparticles with polymers offer versatile means to produce aerogels from nanoparticles, regardless of their size, shape, or properties while retaining their original characteristics. Herein, we report on the surface modification and assembly of various building blocks: photoluminescent nanorods, magnetic nanospheres, and plasmonic nanocubes with particle sizes between 5 and 40 nm. The polymer employed for the coating was poly(isobutylene-alt-maleic anhydride) modified with 1-dodecylamine side chains. The amphiphilic character of the polymer facilitates the stability of the nanocrystals in aqueous media. Hydrogels are prepared via triggering the colloidally stable solutions, with aqueous cations acting as linkers between the functional groups of the polymer shell. Upon supercritical drying, the hydrogels are successfully converted into macroscopic aerogels with highly porous, open structure. Due to the noninvasive preparation method, the nanoscopic properties of the building blocks are retained in the monolithic aerogels, leading to the powerful transfer of these properties to the macroscale. The open pore system, the universality of the polymer-coating strategy, and the large accessibility of the network make these gel structures promising biosensing platforms. Functionalizing the polymer shell with biomolecules opens up the possibility to utilize the nanoscopic properties of the building blocks in fluorescent probing, magnetoresistive sensing, and plasmonic-driven thermal sensing.

Impact of Tuning the Surface Charge Distribution on Colloidal Iron Oxide Nanoparticle Toxicity Investigated in Caenorhabditis elegans

Assessing the toxic effect in living organisms remains a major issue for the development of safe nanomedicines and exposure of researchers involved in the synthesis, handling and manipulation of nanoparticles. In this study, we demonstrate that Caenorhabditis elegans could represent an in vivo model alternative to superior mammalians for the collection of several physiological functionality parameters associated to both short-term and long-term effects of colloidally stable nanoparticles even in absence of microbial feeding, usually reported to be necessary to ensure appropriate intake. Contextually, we investigated the impact of surface charge on toxicity of superparamagnetic iron oxide coated with a wrapping polymeric envelop that confers them optimal colloidal stability. By finely tuning the functional group composition of this shallow polymer–obtaining totally anionic, partially pegylated, partially anionic and partially cationic, respectively–we showed that the ideal surface charge organization to optimize safety of colloidal nanoparticles is the one containing both cationic and anionic groups. Our results are in accordance with previous evidence that zwitterionic nanoparticles allow long circulation, favorable distribution in the tumor area and optimal tumor penetration and thus support the hypothesis that zwitterionic iron oxide nanoparticles could be an excellent solution for diagnostic imaging and therapeutic applications in nanooncology.

Surface plasmon coupling effects on the förster resonance energy transfer from quantum dot into rhodamine 6G

Rhodamine 6G (R6G) molecules linked CdZnSeS/ZnS green-emitting quantum dots (QDs) are self-assembled onto Ag nanoparticles (NPs) for studying the surface plasmon (SP) coupling effect on the Förster resonance energy transfer (FRET) process from QD into R6G. SP coupling can enhance the emission efficiency of QD such that FRET has to compete with QD emission for transferring energy into R6G. It is found that FRET efficiency is reduced under the SP coupling condition. Although R6G emission efficiency can also be enhanced through SP coupling when it is directly linked onto Ag NP, the enhancement decreases when R6G is linked onto QD and then the QD-R6G complex is self-assembled onto Ag NP. In particular, R6G emission efficiency can be reduced through SP coupling when the number of R6G molecules linked onto a QD is high. A rate-equation model is built for resembling the measured photoluminescence decay profiles and providing us with more detailed explanations for the observed FRET and SP coupling behaviors.

Functionalization of colloidal nanoparticles with a discrete number of ligands based on a "HALO-bioclick" reaction

A recombinant HALO-GFP fusion protein was designed and isolated to demonstrate the feasibility of controlling the number and orientation of protein ligands to be conjugated on colloidal gold nanoparticles. AuNPs functionalized with exactly one or exactly two GFP molecules exhibited fully preserved functionality of the protein. The method is very straightforward and generally provides highly bioactive nanoparticle-protein conjugates.

The Effect of Surface Coating of Iron Oxide Nanoparticles on Magnetic Resonance Imaging Relaxivity

Iron oxide nanoparticles (IONPs) with acceptable biocompatibility and size-dependent magnetic properties can be used as efficient contrast agents in magnetic resonance imaging (MRI). Herein, we have investigated the impact of particle size and surface coating on the proton relaxivity of IONPs, as well as engineering of small IONPs' surface coating as a strategy for achieving gadolinium-free contrast agents. Accordingly, polymer coating using poly(isobutylene-alt-maleic anhydride) (PMA) with overcoating of the original ligands was applied for providing colloidal stability to originally oleic acid–capped IONPs in aqueous solution. In case of replacement of the original ligand shell, the polymer had been modified with dopamine. Furthermore, the colloidal stability of the polymer-coated IONPs was evaluated in NaCl and bovine serum albumin (BSA) solutions. The results indicate that the polymer-coated IONPs which involved replacement of the original ligands exhibited considerably better colloidal stability and higher proton relaxivity in comparison to polymer-coated IONPs with maintained ligand shell. The highest r2/r1 we obtained was around 300.

Luminescent Nanomaterials (I)

From molecular probes, also known as fluorophores (typically emitting a longer wavelength than the absorbing wavelength), to inorganic nanoparticles, various light-emitting materials have been actively studied and developed for various applications in life science owing to their superior imaging and sensing ability. Especially after the breakthrough development of quantum dots (QDs), studies have pursued the development of the optical properties and biological applications of luminescent inorganic nanoparticles such as upconversion nanoparticles (UCNPs), metal nanoclusters, carbon dots, and so on. In this review, we first provide a brief explanation about the theoretical background and traditional concepts of molecular fluorophores. Then, currently developed luminescent nanoparticles are described as sensing and imaging platforms from general aspects to technical views.

Inositol 1,4,5-trisphosphate 3-kinase B promotes Ca2+ mobilization and the inflammatory activity of dendritic cells

Innate immune responses to Gram-negative bacteria depend on the recognition of lipopolysaccharide (LPS) by a receptor complex that includes CD14 and TLR4. In dendritic cells (DCs), CD14 enhances the activation not only of TLR4 but also that of the NFAT family of transcription factors, which suppresses cell survival and promotes the production of inflammatory mediators. NFAT activation requires Ca²⁺ mobilization. In DCs, Ca²⁺ mobilization in response to LPS depends on phospholipase C γ2 (PLCγ2), which produces inositol 1,4,5-trisphosphate (IP₃). Here, we showed that the IP₃ receptor 3 (IP₃R3) and ITPKB, a kinase that converts IP₃ to inositol 1,3,4,5-tetrakisphosphate (IP₄), were both necessary for Ca²⁺ mobilization and NFAT activation in mouse and human DCs. A pool of IP₃R3 was located on the plasma membrane of DCs, where it colocalized with CD14 and ITPKB. Upon LPS binding to CD14, ITPKB was required for Ca²⁺ mobilization through plasma membrane-localized IP₃R3 and for NFAT nuclear translocation. Pharmacological inhibition of ITPKB in mice reduced both LPS-induced tissue swelling and the severity of inflammatory arthritis to a similar extent as that induced by the inhibition of NFAT using nanoparticles that delivered an NFAT-inhibiting peptide specifically to phagocytic cells. Our results suggest that ITPKB may represent a promising target for anti-inflammatory therapies that aim to inhibit specific DC functions.

Combined effects of surface plasmon coupling and Förster resonance energy transfer on the light color conversion behaviors of colloidal quantum dots on an InGaN/GaN quantum-well nanodisk structure

By forming nanodisk (ND) structures on a blue-emitting InGaN/GaN quantum-well (QW) template, the QWs become close to the red-emitting quantum dots (QDs) and Ag nanoparticles (NPs) attached onto the sidewalls of the NDs such that Förster resonance energy transfer (FRET) and surface plasmon (SP) coupling can occur to enhance the efficiency of blue-to-red color conversion. With a larger ND height, more QWs are exposed to open air on the sidewall for more QD/Ag NP attachment through QD self-assembly and Ag NP drop casting such that the FRET and SP coupling effects, and hence the color conversion efficiency can be enhanced. A stronger FRET process leads to a longer QD photoluminescence (PL) decay time and a shorter QW PL decay time. It is shown that SP coupling can enhance the FRET efficiency.

In depth characterisation of the biomolecular coronas of polymer coated inorganic nanoparticles with differential centrifugal sedimentation

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can be utilised as a high-precision tool for the reliable characterisation of functional nanoparticles of different materials. We report a method to correlate the sedimentation shift with the polymer and biomolecule adsorption on the nanoparticle surface, validating the developed core–shell model. We also highlight its limit when measuring nanoparticles of smaller size and the need to use several complementary methods when characterising nanoparticle corona complexes.

Förster resonance energy transfer in surface plasmon coupled color conversion processes of colloidal quantum dots

Förster resonance energy transfer (FRET) from a green-emitting quantum dot (GQD) into a red-emitting quantum dot (RQD) is an important mechanism in a multiple-color conversion process, particularly under the surface plasmon (SP) coupling condition for enhancing color conversion efficiency. Here, the dependencies of FRET efficiency on the relative concentrations of GQD and RQD in their mixtures and their surface molecule coatings for controlling surface charges are studied. Also, the SP coupling effects induced by two kinds of Ag nanoparticles on the emission behaviors of GQD and RQD are demonstrated, particularly when FRET is involved in the coupling process. FRET efficiency is reduced under the SP coupling condition. SP coupling can enhance the color conversion efficiency of either GQD or RQD. The combination of SP coupling and FRET can be used for controlling the relative converted light intensities in a multiple-color conversion process.

Recent Advances in Microfluidics for the Preparation of Drug and Gene Delivery Systems

Drug delivery systems (DDSs) have great potential for improving the treatment of several diseases, especially microbial infections and cancers. However, the formulation procedures of DDSs remain challenging, especially at the nanoscale. Reducing batch-to-batch variation and enhancing production rate are some of the essential requirements for accelerating the translation of DDSs from a small scale to an industrial level. Microfluidic technologies have emerged as an alternative to the conventional bench methods to address these issues. By providing precise control over the fluid flows and rapid mixing, microfluidic systems can be used to fabricate and engineer different types of DDSs with specific properties for efficient delivery of a wide range of drugs and genetic materials. This review discusses the principles of controlled rapid mixing that have been employed in different microfluidic strategies for producing DDSs. Moreover, the impact of the microfluidic device design and parameters on the type and properties of DDS formulations was assessed, and recent applications in drug and gene delivery were also considered.

Human metabolite-derived alkylsuccinate/dilinoleate copolymers: from synthesis to application

The advances in polymer chemistry have allowed the preparation of biomedical polymers using human metabolites as monomers that can hold unique properties beyond the required biodegradability and biocompatibility. Herein, we demonstrate the use of endogenous human metabolites (succinic and dilinoleic acids) as monomeric building blocks to develop a new series of renewable resource-based biodegradable and biocompatible copolyesters. The novel copolyesters were characterized in detail employing several standard techniques, namely 1H NMR, 13C NMR, and FTIR spectroscopy and SEC, followed by an in-depth thermomechanical and surface characterization of their resulting thin films (DSC, TGA, DMTA, tensile tests, AFM, and contact angle measurements). Also, their anti-fungal biofilm properties were assessed via an anti-fungal biofilm assay and the biological properties were evaluated in vitro using relevant human-derived cells (human mesenchymal stem cells and normal human dermal fibroblasts). These novel highly biocompatible polymers are simple and cheap to prepare, and their synthesis can be easily scaled-up. They presented good mechanical, thermal and anti-fungal biofilm properties while also promoting cell attachment and proliferation, outperforming well-known polymers used for biomedical applications (e.g. PVC, PLGA, and PCL). Moreover, they induced morphological changes in the cells, which were dependent on the structural characteristics of the polymers. In addition, the obtained physicochemical and biological properties can be design-tuned by the synthesis of homo- and -copolymers through the selection of the diol moiety (ES, PS, or BS) and by the addition of a co-monomer, DLA. Consequently, the copolyesters presented herein have high application potential as renewable and cost-effective biopolymers for various biomedical applications.

Dual activatable self-assembled nanotheranostics for bioimaging and photodynamic therapy

Multifunctional nanosystems that can transport therapeutic and diagnostic agents into tumor sites and activate their respective functions via tumor-microenvironment recognition are highly desirable for clinical applications. We fabricated pH and redox dual-activatable self-assembled nanotheranostics (named as DA-SNs) via coordination-driven self-assembly of chlorin e6 (Ce6) disulfide-linked pH sensitive polymer ligand, poly (isobutylene-alt-maleic anhydride-graft-methoxy-poly (ethyleneglycol)-graft-imidazole-graft-Cystamine-Ce6) [PIMA-mPEG-API-SS-Ce6], and gadolinium ions (Gd³⁺). DA-SNs exhibited uniform particle size of ~48 nm, excellent stability, and inherent biosafety. Negatively charged DA-SNs could prolong blood circulation time (t_1/2 = 2.91 h) and improve tumor accumulation. Moreover, DA-SNs could undergo surface charge switch from negative charge to positive one in a slightly acidic tumor extracellular environment (pH 6.8), thus enhancing cellular uptake. After entering tumor cells, fluorescence, photodynamic therapeutic activity, and T₁MR contrast from DA-SNs could be activated within this intracellular environment with lowered pH and high level of GSH. Importantly, human tumors implanted in mice could be successfully visualized via distinct pH and redox dual-sensitive T₁MR contrast and fluorescence imaging, indicating that DA-SNs could serve as a dual-modal MR/fluorescence imaging probe for tumor-targeting diagnosis. In addition, DA-SNs exhibited superior photodynamic therapeutic efficiency with negligible side effects. Therefore, this DA-SN shows great promise for synergistic photodynamic therapy and diagnostic imaging.

Colloidal polymer-coated Zn-doped iron oxide nanoparticles with high relaxivity and specific absorption rate for efficient magnetic resonance imaging and magnetic hyperthermia

Colloidally stable nanoparticles-based magnetic agents endowed with very high relaxivity and specific absorption rate are extremely desirable for efficient magnetic resonance imaging and magnetic hyperthermia, respectively. Here, we report a water dispersible magnetic agent consisting of zinc-doped superparamagnetic iron oxide nanoparticles (i.e., Zn-SPIONs) of 15 nm size with high saturation magnetization coated with an amphiphilic polymer for effective magnetic resonance imaging and magnetic hyperthermia of glioblastoma cells. These biocompatible polymer-coated Zn-SPIONs had 24 nm hydrodynamic diameter and exhibited high colloidal stability in various aqueous media, very high transverse relaxivity of 471 mM^-1 s^-1, and specific absorption rate up to 743.8 W g^-1, which perform better than most iron oxide nanoparticles reported in the literature, including commercially available agents. Therefore, using these polymer-coated Zn-SPIONs even at low concentrations, T₂-weighted magnetic resonance imaging and moderate magnetic hyperthermia of glioblastoma cells under clinically relevant magnetic field were successfully implemented. In addition, the results of this in vitro study suggest the superior potential of Zn-SPIONs as a theranostic nanosystem for brain cancer treatment, simultaneously acting as a contrast agent for magnetic resonance imaging and a heat mediator for localized magnetic hyperthermia.

Modeling the interaction of amphiphilic polymer nanoparticles with biomembranes to Guide rational design of drug delivery systems

Nanoparticle assisted drug delivery to the cytoplasm is limited by sequestration of nanoparticles in endosomes. Endosomal escape through polymer-induced membrane destabilization is one of a few well characterized mechanisms to overcome it. Aiming to utilize this method in vivo, it is necessary to understand how modulating the structural and chemical features of the polymer and the presence of proteins in biological fluids can affect this activity. Here, as a model for the endosomal membrane, we use the membrane of red blood cells to evaluate the membrane destabilization ability of a model amphiphilic polymer in the presence of blood plasma using a hemolysis assay. This allows determination of red blood cells membrane permeabilization through the quantification of hemoglobin leakage. Our results showed a strong inhibitory effect of plasma, and that hemolytic activity can be improved by chemical modification of the polymeric micelle, reducing its interaction with plasma proteins. Finally, a second mechanism of pH-induced direct diffusion is proposed and tested using an oil/water partitioning model. These results offer a body of knowledge to improve delivery of drugs across biological membranes using carefully designed polymeric nanocarriers.

From mono-PEGylation towards anti-nonspecific protein interaction: comparison of dihydrolipoic acid versus glutathione-capped fluorescent gold nanoclusters using gel electrophoresis

Ultrafine fluorescent gold nanoclusters (AuNCs) have emerged as biocompatible nanoprobes for biomedical imaging in vivo, and the precision surface chemistry of AuNCs is the key for attaining their clinical application. Comparison of two promising candidates for future nanomedicine, i.e. dihydrolipoic acid- versus glutathione-capped AuNCs (AuNC@DHLA vs. AuNC@GSH), was conducted for the first time to clarify their polyethylene glycol-related bioconjugate chemistry (PEGylation) and protein interactions. Gel electrophoresis was performed to separate the number of AuNCs PEGylation, and the molecular weight of the PEG spacer dominated the resolution of the separation in the gel. We have engineered and isolated the mono-PEGylated AuNCs either from the indirect carbodiimide bioconjugate chemistry or the direct Au-S binding. One-pot synthesis showed great efficiency for isolating mono-PEGylated AuNC@GSH from the tailored controlled aggregation of Au(i)-thiolate complexes on in situ generated Au(0) cores. Post-PEGylation of AuNC@GSH was also feasible using monodendate thiol-terminated PEG, but bidendate ligands of AuNC@DHLA exhibited low PEGylated efficiency by Au-S binding. In addition, mono-PEGylated AuNC@GSH significantly enhanced the ability of anti-nonspecific protein adsorption, but mono-PEGylated AuNC@DHLA cannot avoid the nonspecific binding with serum albumin. In addition, specific nano-assembly involving mono-biotinylated AuNCs with streptavidin were also compared using gel electrophoresis. These results provide key insights into the selection, preparation and design of functional AuNCs as nanoprobes for versatile biomedical applications.

Field-controlled magnetoelectric core-shell CoFe2O4@BaTiO3 nanoparticles as effective drug carriers and drug release in vitro

The targeted drug release at tumor cells while sparing normal cells is a huge challenge. Core-shell magnetoelectric (ME) nanoparticles have addressed this problem using shape-dependent magneto-electric attributes. The colloidally stable, core-shell cobalt ferrite@barium titanate (CFO@BTO) ME nanoparticles (NPs) used for in vitro study were synthesized using sonochemical method. The structural characteristics and core-shell morphology were analyzed by X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) respectively. Further magnetic and exchange coupling between two phases of ME nanostructures were studied at room temperature. Colloidal stability was studied in different suspension solutions (Water, SBB, PBS, and DMEM) using dynamic light scattering. Subsequently, the synthesized nanoparticles were functionalized with anticancer drugs including doxorubicin and methotrexate up to 80% via (EDC) chemistry. In vitro cytotoxicity studies carried out on human hepatocellular carcinoma (HepG2) and human malignant melanoma (HT144), cells validated the magneto-electric property of CFO@BTO nano-carriers in the presence of external magnetic field (5 mT), with significantly enhanced cytotoxicity when compared to free drugs and without field replicates. The resulted IC₅₀ values ranging from 5.3-7.3 μg/ml compared to 30.1-43.1 μg/ml in the absence of a magnetic field also confirmed the involved physical attributes of magnetoelectric nanostructures. The fluorescent microscopy results also indicated the increased apoptosis in magnetic field-assisted samples. Finally, hemolysis assay indicated the suitability of CFO@BTO nano-carriers for intravenous applications at IC₅₀ concentration.

Shielded Silver Nanorods for Bioapplications

Silver is arguably the best plasmonic material in terms of optical performance. However, wide application of Ag and Ag-containing nanoparticles is usually hindered by two major drawbacks, namely, chemical degradation and cytotoxicity. We report herein a synthetic method for highly monodisperse polymer-coated Ag nanorods, which are thereby protected against external stimuli (oxidation, light, heat) and are noncytotoxic to various cell lines. The monodispersity of Ag nanorods endows them with narrow plasmon bands, which are tunable into the near-infrared biological transparency window, thus facilitating application in bioanalytical and therapeutic techniques. We demonstrate intracellular surface-enhanced Raman scattering (SERS) imaging using Ag nanorods encoded with five different Raman reporter molecules. Encoded Ag nanorods display long-term stability in terms of size, shape, optical response, and SERS signal. Our results help eliminate concerns of instability and cytotoxicity in the application of Ag-containing nanoparticles with enhanced optical response, toward the development of bioapplications.