Nanostructured polymeric coatings based on chitosan and dopamine-modified hyaluronic acid for biomedical applications

Mussel-inspired chitosan and its applications in the biomedical field

Chitosan (CS) has physicochemical properties including solubility, crystallinity, swellability, viscosity, and cohesion, along with biological properties like biocompatibility, biodegradation, antioxidant, antibacterial, and antitumor effects. However, these characteristics of CS are greatly affected by its degree of deacetylation, molecular weight, pH and other factors, which limits the application of CS in biomedicine. The modification of CS with catechol-containing substances inspired by mussels can not only improve these properties of CS, but also endow it with self-healing property, providing an environmentally friendly and sustainable way to promote the application of CS in biomedicine. In this paper, the properties of CS and its limitation in the biomedical filed are introduced in detail. Then, the modification methods and properties of substances with catechol groups inspired by mussels on CS are reviewed. Finally, the applications of modified CS in the biomedical field of wound healing, drug delivery, anticancer therapy, biosensor and 3D printing are further discussed. This review can provide valuable information for the design and exploitation of mussel-inspired CS in the biomedical field.

Tuning stiffness of hyaluronan-cholesterol nanogels by mussel-inspired dopamine-Fe3+ coordination: Preparation and properties evaluation

In the evolving field of nanomedicine, tailoring the mechanical properties of nanogels to fine-tune their biological performance is a compelling avenue of research. This work investigates an innovative method for modulating the stiffness of hyaluronan-cholesterol (HACH) nanogels, an area that remains challenging. By grafting dopamine (DOPA) onto the HA backbone, characterized through UV, 1H NMR, and FT-IR analyses, we synthesized a novel polymer that spontaneously forms nanogels in aqueous environments. These HACH-DOPA nanogels are characterized by their small size (~170 nm), negative charge (around -32 mV), high stability, efficient drug encapsulation, and potent antioxidant activities (measured by ABTS test). Leveraging mussel-inspired metal coordination chemistry, the DOPA moieties enable stiffness modulation of the nanogels through catechol-Fe3+ interactions. This modification leads to increased crosslinking and, consequently, nanogels with a significantly increased stiffness, as measured by atomic force microscopy (AFM), with the formation of the HACH-DOPA@Fe3+ complex being pH-dependent and reversible. The cytocompatibility was evaluated via WST-1 cell proliferation assays on HUVEC and HDF cell lines, showing no evident cytotoxicity. Furthermore, the modified nanogels demonstrated enhanced cellular uptake, suggesting their substantial potential for intracellular drug delivery applications, a hypothesis supported by confocal microscopy assays. This work not only provides valuable insight into modulating nanogel stiffness but also advances new nanosystems for promising biomedical applications.

Integrated Electrochemical Aptamer Biosensing and Colorimetric pH Monitoring via Hydrogel Microneedle Assays for Assessing Antibiotic Treatment

Current methods for therapeutic drug monitoring (TDM) have a long turnaround time as they involve collecting patients' blood samples followed by transferring the samples to medical laboratories where sample processing and analysis are performed. To enable real-time and minimally invasive TDM, a microneedle (MN) biosensor to monitor the levels of two important antibiotics, vancomycin (VAN) and gentamicin (GEN) is developed. The MN biosensor is composed of a hydrogel MN (HMN), and an aptamer-functionalized flexible (Flex) electrode, named HMN-Flex. The HMN extracts dermal interstitial fluid (ISF) and transfers it to the Flex electrode where sensing of the target antibiotics happens. The HMN-Flex performance is validated ex vivo using skin models as well as in vivo in live rat animal models. Data is leveraged from the HMN-Flex system to construct pharmacokinetic profiles for VAN and GEN and compare these profiles with conventional blood-based measurements. Additionally, to track pH and monitor patient's response during antibiotic treatment, an HMN is developed that employs a colorimetric method to detect changes in the pH, named HMN-pH assay, whose performance has been validated both in vitro and in vivo. Further, multiplexed antibiotic and pH detection is achieved by simultaneously employing the HMN-pH and HMN-Flex on live animals.

Mucoadhesive chitosan-catechol as an efficient vaccine delivery system for intranasal immunization

The mucosal barrier and scavenging effect of the mucosal layer are two main obstacles in inducing mucosal immunization. To overcome these obstacles, we synthesized a bio-inspired mucoadhesive material, chitosan-catechol (ChiC), for surface modification of inactive porcine epidemic diarrhea virus (PEDV). Studies have revealed that PEDV particles can be facilely and mildly modified by Chi-C forming Chi-C-PEDV nanoparticles (Chic-Ps) through the covalent and electrostatic bond, which effectively prolongs the retention time of PEDV in the nasal mucosa. The cell co-culture model demonstrated that Chic-Ps exhibit enhanced recruitment of dendritic cells via the secretion of stimulating chemokine CCL20 and improving antigen permeability by disruption the distribution of ZO-1 protein in epithelial cells. Additionally, the flow cytometry (FCM) analysis revealed that Chic-Ps facilitate trafficking to lymph nodes and induce stronger cellular and humoral immune responses compared to unmodified PEDV. Notably, Chic-Ps induced a higher level of PEDV neutralizing antibody was induced by Chic-Ps in the nasal washes, as confirmed by a plaque reduction neutralization test. These results demonstrate that Chi-C is a promising nasal delivery system for vaccines. Proof of principle was obtained for inactivated PEDV, but similar delivery mechanisms could be applied in other vaccines when intranasal administration is needed.

Recent Advances in Environmentally Friendly Dual-crosslinking Polymer Networks

Environmentally friendly crosslinked polymer networks feature degradable covalent or non-covalent bonds, with many of them manifesting dynamic characteristics. These attributes enable convenient degradation, facile reprocessibility, and self-healing capabilities. However, the inherent instability of these crosslinking bonds often compromises the mechanical properties of polymer networks, limiting their practical applications. In this context, environmentally friendly dual-crosslinking polymer networks (denoted EF-DCPNs) have emerged as promising alternatives to address this challenge. These materials effectively balance the need for high mechanical properties with the ability to degrade, recycle, and/or self-heal. Despite their promising potential, investigations into EF-DCPNs remain in their nascent stages, and several gaps and limitations persist. This Review provides a comprehensive overview of the synthesis, properties, and applications of recent progress in EF-DCPNs. Firstly, synthetic routes to a rich variety of EF-DCPNs possessing two distinct types of dynamic bonds (i.e., imine, disulfide, ester, hydrogen bond, coordination bond, and other bonds) are introduced. Subsequently, complex structure- and dynamic nature-dependent mechanical, thermal, and electrical properties of EF-DCPNs are discussed, followed by their exemplary applications in electronics and biotechnology. Finally, future research directions in this rapidly evolving field are outlined.

Local and Sustained Baricitinib Delivery to the Skin through Injectable Hydrogels Containing Reversible Thioimidate Adducts

Janus kinase (JAK) inhibitors are approved for many dermatologic disorders, but their use is limited by systemic toxicities including serious cardiovascular events and malignancy. To overcome these limitations, injectable hydrogels are engineered for the local and sustained delivery of baricitinib, a representative JAK inhibitor. Hydrogels are formed via disulfide crosslinking of thiolated hyaluronic acid macromers. Dynamic thioimidate bonds are introduced between the thiolated hyaluronic acid and nitrile-containing baricitinib for drug tethering, which is confirmed with 1H and 13C nuclear magnetic resonance (NMR). Release of baricitinib is tunable over six weeks in vitro and active in inhibiting JAK signaling in a cell line containing a luciferase reporter reflecting interferon signaling. For in vivo activity, baricitinib hydrogels or controls are injected intradermally into an imiquimod-induced mouse model of psoriasis. Imiquimod increases epidermal thickness in mice, which is unaffected when treated with baricitinib or hydrogel alone. Treatment with baricitinib hydrogels suppresses the increased epidermal thickness in mice treated with imiquimod, suggesting that the sustained and local release of baricitinib is important for a therapeutic outcome. This study is the first to utilize a thioimidate chemistry to deliver JAK inhibitors to the skin through injectable hydrogels, which has translational potential for treating inflammatory disorders.

Dipeptide-Based Photoreactive Instant Glue for Environmental and Biomedical Applications

Nature-inspired smart materials offer numerous advantages over environmental friendliness and efficiency. Emulating the excellent adhesive properties of mussels foot proteins, where the lysine is in close proximity with the 3,4-dihydroxy-l-phenylalanine (DOPA), we report the synthesis of a novel photocurable peptide-based adhesive consisting exclusively of these two amino acids. Our adhesive is a highly concentrated aqueous solution of a monomer, a cross-linker, and a photoinitiator. Lap-shear adhesion measurements on plastic and glass surfaces and comparison with different types of commercial adhesives showed that the adhesive strength of our glue is comparable when applied in air and superior when used underwater. No toxicity of our adhesive was observed when the cytocompatibility on human dermal fibroblast cells was assessed. Preliminary experiments with various tissues and coral fragments showed that our adhesive could be applied to wound healing and coral reef restoration. Given the convenience of the facile synthesis, biocompatibility, ease of application underwater, and high adhesive strength, we expect that our adhesive may find application, but not limited, to the biomedical and environmental field.

Injectable, pore-forming, self-healing, and adhesive hyaluronan hydrogels for soft tissue engineering applications

Most existing injectable hydrogels are non-porous, thereby lacking a microporous structure to promote cell ingrowth. Also, most hydrogels do not effectively adhere to the host tissue. The present study describes an injectable double network hydrogel formed by combining two hyaluronic acid (HA) derivatives, namely dopamine grafted HA (DAHA) and methacrylated HA (HAMA). These constituents instantly form a physically crosslinked network through Fe3+-dopamine coordination, and confer fast gelation, pore formation, and self-healing properties to the hydrogel. Photocroslinked upon UV exposure, HAMA forms a chemically crosslinked network, thereby improving mechanical and degradation properties. The adhesive properties of this hydrogel are attributed to the presence of dopamine groups, inspired by mussel creatures. Proper modification of HA chains was confirmed by NMR spectroscopy. The physical, mechanical, rheological, and biological properties of the new hydrogels were quantified in wet laboratory conditions. The results revealed that the DAHA/HAMA hydrogel rapidly forms a self-healing microporous adhesive scaffold with a 26.9 µm pore size, 29.4 kPa compressive modulus, and 12.8 kPa adhesion strength in under 6 s. These findings suggest that the new hydrogel is a promising candidate for in situ repair of soft tissues, particularly mechanically dynamic ones such as the vocal folds, cartilage, and dermis.

Photocatalytic and Photothermal Antimicrobial Mussel-Inspired Nanocomposites for Biomedical Applications

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications.

Hyaluronic Acid-Based Bioconjugate Systems, Scaffolds, and Their Therapeutic Potential

In recent years, the development of hyaluronic acid or hyaluronan (HA) based scaffolds, medical devices, bioconjugate systems have expanded into a broad range of research and clinical applications. Research findings over the last two decades suggest that the abundance of HA in most mammalian tissues with distinctive biological roles and chemical simplicity for modifications have made it an attractive material with a rapidly growing global market. Besides its use as native forms, HA has received much interest on so-called "HA-bioconjugates" and "modified-HA systems". In this review, the importance of chemical modifications of HA, underlying rationale approaches, and various advancements of bioconjugate derivatives with their potential physicochemical, and pharmacological advantages are summarized. This review also highlights the current and emerging HA-based conjugates of small molecules, macromolecules, crosslinked systems, and surface coating strategies with their biological implications, including their potentials and key challenges discussed in detail.

Evaluation of Cytotoxicity of Hyaluronic Acid/Chitosan/Bacterial Cellulose-Based Membrane

Novel wound dressing materials are required to non-cytotoxic with a viable cell ratio of above 92%. Herein, the cytotoxicity of hyaluronic acid/chitosan/bacterial cellulose-based (BC(CS/HA)) membranes are evaluated and compared to that of alginate/chitosan/bacterial cellulose-based (BC(CS/Alg)) membranes was investigated. Multilayer membranes with up to ten CS/HA or CS/Alg layers were prepared using the layer-by-layer (LBL) method. Scanning electron microscopy showed that the diameters of the fibers in the BC(CS/Alg) and BC(CS/HA) membranes were larger than those in a BC membrane. The cytotoxicity was analyzed using BALB-3T3 clone A31 cells (mouse fibroblasts, 1 × 10⁴ cells/well). The BC(CS/HA)₅ and BC(CS/HA)₁₀ membranes exhibited high biocompatibility, with the cell viabilities of 94% and 87% at 5 d, respectively, compared to just 82% for the BC(CS/Alg)₅ and BC(CS/Alg)₁₀ membranes with same numbers of layers. These results suggested that BC(CS/HA)₅ is a promising material for wound dressings.

Physical dual-network photothermal antibacterial multifunctional hydrogel adhesive for wound healing of drug-resistant bacterial infections synthesized from natural polysaccharides

Wound-healing of drug-resistant bacterial infections has always been a clinical challenge. The design and development of effective and economically safe wound dressings with antimicrobial activity and healing-promoting properties is highly desirable, especially in the context of wound-infections. Herein, we designed a physical dual-network multifunctional hydrogel adhesive based on polysaccharide material for the treatment of full-thickness skin defects infected with multidrug-resistant bacteria. The hydrogel utilized ureido-pyrimidinone (UPy)-modified Bletilla striata polysaccharide (BSP) as the first physical interpenetrating network for providing some brittleness and rigidity; and then branched macromolecules formed after cross-linking Fe³⁺ with dopamine-conjugated di-aldehyde-hyaluronic acid as the second physical interpenetrating network for providing some flexibility and elasticity. In this system, BSP and hyaluronic acid (HA) are used as synthetic matrix materials to provide strong biocompatibility and wound-healing ability. In addition, ligand cross-linking of catechol-Fe³⁺ and quadrupole hydrogen-bonding cross-linking of UPy-dimer can form a highly dynamic physical dual-network structure, which imparts good rapid self-healing, injectability, shape-adaptation, NIR/pH responsiveness, high tissue-adhesion and mechanical properties of this hydrogel. Meanwhile, bioactivity experiments demonstrated that the hydrogel also possesses powerful antioxidant, hemostatic, photothermal-antibacterial and wound-healing effects. In conclusion, this functionalized hydrogel is a promising candidate for clinical treatment of full-thickness bacteria-stained wound dressing materials.

Marine-origin polysaccharides-based free-standing multilayered membranes as sustainable nanoreservoirs for controlled drug delivery

The layer-by-layer (LbL) assembly technology has been widely used to functionalise surfaces and precisely engineer robust multilayered bioarchitectures with tunable structures, compositions, properties, and functions at the nanoscale by resorting to a myriad of building blocks exhibiting complementary interactions. Among them, marine-origin polysaccharides are a sustainable renewable resource for the fabrication of nanostructured biomaterials for biomedical applications owing to their wide bioavailability, biocompatibility, biodegradability, non-cytotoxicity, and non-immunogenic properties. Chitosan (CHT) and alginate (ALG) have been widely employed as LbL ingredients to shape a wide repertoire of size- and shape-tunable electrostatic-driven multilayered assemblies by exploring their opposite charge nature. However, the insolubility of CHT in physiological conditions intrinsically limits the range of bioapplications of the as-developed CHT-based LbL structures. Herein, we report the preparation of free-standing (FS) multilayered membranes made of water-soluble quaternised CHT and ALG biopolymers for controlled release of model drug molecules. The influence of the film structure in the drug release rate is studied by assembling two distinct set-ups of FS membranes, having the model hydrophilic drug fluorescein isothiocyanate-labelled bovine serum albumin (FITC-BSA) either as an intrinsic building block or added as an outer layer after the LbL assembly process. Both FS membranes are characterised for their thickness, morphology, in vitro cytocompatibility, and release profile, with those having FITC-BSA as an intrinsic LbL ingredient denoting a more sustained release rate. This work opens up new avenues for the design and development of a wide array of CHT-based devices for biomedical applications, overcoming the limitations associated with the insolubility of native CHT under physiological conditions.

Chitosan-Based Biomaterials: Insights into Chemistry, Properties, Devices, and Their Biomedical Applications

Chitosan is a marine-origin polysaccharide obtained from the deacetylation of chitin, the main component of crustaceans’ exoskeleton, and the second most abundant in nature. Although this biopolymer has received limited attention for several decades right after its discovery, since the new millennium chitosan has emerged owing to its physicochemical, structural and biological properties, multifunctionalities and applications in several sectors. This review aims at providing an overview of chitosan properties, chemical functionalization, and the innovative biomaterials obtained thereof. Firstly, the chemical functionalization of chitosan backbone in the amino and hydroxyl groups will be addressed. Then, the review will focus on the bottom-up strategies to process a wide array of chitosan-based biomaterials. In particular, the preparation of chitosan-based hydrogels, organic–inorganic hybrids, layer-by-layer assemblies, (bio)inks and their use in the biomedical field will be covered aiming to elucidate and inspire the community to keep on exploring the unique features and properties imparted by chitosan to develop advanced biomedical devices. Given the wide body of literature that has appeared in past years, this review is far from being exhaustive. Selected works in the last 10 years will be considered.

An ECM-Mimicking, Injectable, Viscoelastic Hydrogel for Treatment of Brain Lesions

Brain lesions can arise from traumatic brain injury, infection, and craniotomy. Although injectable hydrogels show promise for promoting healing of lesions and health of surrounding tissue, enabling cellular ingrowth and restoring neural tissue continue to be challenging. It is hypothesized that these challenges arise in part from the mismatch of composition, stiffness, and viscoelasticity between the hydrogel and the brain parenchyma, and this hypothesis is tested by developing and evaluating a self-healing hydrogel that not only mimics the composition, but also the stiffness and viscoelasticity of native brain parenchyma. The hydrogel is crosslinked by dynamic boronate ester bonds between phenylboronic acid grafted hyaluronic acid (HA-PBA) and dopamine grafted gelatin (Gel-Dopa). This HA-PBA/Gel-Dopa hydrogel could be injected into a lesion cavity in a shear-thinning manner with rapid hemostasis, high tissue adhesion, and efficient self-healing. In an in vivo mouse model of brain lesions, the multi-functional injectable hydrogel is found to support neural cell infiltration, decrease astrogliosis and glial scars, and close the lesions. The results suggest a role for extracellular matrix-mimicking viscoelasticity in brain lesion healing, and motivate additional experimentation in larger animals as the technology progresses toward potential application in humans.

A biocompatible double-crosslinked gelatin/ sodium alginate/dopamine/quaterniazed chitosan hydrogel for wound dressings based on 3D bioprinting technology

438Severe skin injuries can cause serious problems, which could affect the patient's normal life, if not dealt properly in a timely and effective manner. It is an urgent requirement to develop personalized wound dressings with excellent antibacterial activity and biocompatibility to match the shape of the wound to facilitate clinical application. In this study, a bioink (GAQ) based on gelatin (Gel)/sodium alginate (SA)/ quaternized chitosan (QCS) was prepared, and GAQ hydrogel dressing grafting with dopamine (GADQ) was fabricated by an extrusion three-dimensional (3D) printing technology. QCS was synthesized by modifying quaternary ammonium group on chitosan, and its structure was successfully characterized by nuclear magnetic resonance (1H NMR) and Fourier-transform infrared spectroscopy (FT-IR). Our results showed that the GADQ hydrogel dressing that was double-crosslinked by EDC/ NHS and Ca²⁺ had good tensile strength, considerable swelling ratio, and effective antioxidation properties. It also showed that GADQ1.5% had 93.17% and 91.06% antibacterial activity against Staphylococcus aureus and Escherichia coli, respectively. Furthermore, the relative survival ratios of fibroblast cells seeded on these hydrogels exceeded 350% after cultured for 7 days, which proved the biocompatibility of these hydrogels. Overall, this advanced 3D-printed GADQ1.5% hydrogels with effective antioxidation, excellent antibacterial activity and good biocompatibility had a considerable application potential for wound healing.

Characterization of Polymer Coating on Palm Kernel Shell-Reinforced Polypropylene Composites

Natural fibers are increasingly used in the polymer industry as bio-composites for a wide range of applications, such as the interior part of the automobile, interior material boards, decking panels, and many others. The presence of cellulose, which is hydrophilic in nature, lessens the mechanical properties of the bio-composites by increasing water uptake into the composites or also may affect the interfacial bonding between the polymer matrix and the fibers because the matrix is hydrophobic. The former may occur due to the surface of the bio-composites being highly exposed to water sources, e.g., high humidity in the air, rainwater, and many more. Thus, an additional layer on the surface of the bio-composites needs to be applied to protect the surface from water sources. The coating may be used for decorative, protective, or both purposes. This study aims to investigate the performance of polymer coating on a bio-composite substrate. The coating solution, chitosan-pectin-calcium chloride (CPC) solution was prepared, and the compatibility and wettability of the coating solution with the polymer-based bio-composites substrate were evaluated. The substrate was dipped into the coating solution for two minutes and hung to allow the excess coating solution to drop while drying the substrate. The performance of coating on the bio-composite substrate is evaluated by measuring the contact angle θ and average maximum bond strength σb of the sample with the different numbers of coating layers. It is found that the wettability of the contact angle indicates a lower contact angle for two-layer compared to one layer of the CPC coating due to the hydrophilicity of the coating materials.

Mussel-Inspired Lego Approach for Controlling the Wettability of Surfaces with Colorless Coatings

The control of surface wettability with polyphenol coatings has been at the forefront of materials research since the late 1990s, when robust underwater adhesion was linked to the presence of L-DOPA-a catecholic amino acid-in unusually high amounts, in the sequences of several mussel foot proteins. Since then, several successful approaches have been reported, although a common undesired feature of most of them is the presence of a remnant color and/or the intrinsic difficulty in fine-tuning and controlling the hydrophobic character. We report here a new family of functional catechol-based coatings, grounded in the oxidative condensation of readily available pyrocatechol and thiol-capped functional moieties. The presence of at least two additional thiol groups in their structure allows for polymerization through the formation of disulfide bonds. The synthetic flexibility, together with its modular character, allowed us to: (I) develop coatings with applications exemplified by textiles for oil-spill water treatment; (II) develop multifunctional coatings, and (III) fine-tune the WCA for flat and textile surfaces. All of this was achieved with the application of colorless coatings.

Inspired by the Periodontium: A Universal Bacteria-Defensive Hydrogel for Preventing Percutaneous Device-Related Infection

Percutaneous device-related infection has greatly shortened the service period of devices and seriously reduced the quality of life of patients. Bacteria are one of the main pathogenic factors and cannot be effectively and conveniently eradicated by traditional strategies (e.g., construct coatings and introduce antibiotics), due to the complex interface among medical devices, surrounding tissue, and colonizing bacteria. Inspired by the periodontium, a universal bacteria-defensive hydrogel adapting to the complicated interface is fabricated by introducing phenol-amine chemistry to a polymeric matrix of N-hydroxyethyl acrylamide (HPC hydrogels). The HPC hydrogels with excellent toughness (2.1 MJ/m3), adhesion (10.2 and 13.2 kPa for pigskin and Ti-6Al-4V alloy, respectively), and antibacterial property (up to 99.9% for both Escherichia coli and Staphylococcus aureus) contributed to the innate microbe barrier via sealing the tissue-device interface and adaptive defense to eradicate bacteria. Meanwhile, bacterial invasion experiments demonstrate HPC hydrogels possess both a bacteria-defensive property (up to 24 h) and cell-protecting function at the same time. Furthermore, the biocompatibility of HPC hydrogels is verified in tests for in vitro cytotoxicity and in vivo irritation. Hence, the designed HPC hydrogels are considered as an emerging and universal candidate for preventing bacterial infection and can protect the deep tissue around a percutaneous device.

Adhesive and Injectable Hydrogel Microspheres for Inner Ear Treatment

The least damaging and most economical method to deliver drugs or carriers into the inner ear for treatment of disease is through the middle ear. However, the retention of drug in the middle ear is an obstacle. Here, inspired by the adhesion of mussels, a methacrylate gelatin microspheres (GM) coupling polydopamine (PDA) layer (GM@PDA) with excellent adhesive ability is constructed, and Ebselen liposomes are further loaded into the GM@PDA (GM@PDA@Lipo-Ebselen). The loading capacity of GM@PDA for Ebselen liposomes is 25 ± 1 µg mg^-1 microspheres. GM@PDA@Lipo-Ebselen could be injected on round windows membrane (RWM) and tightly adheres to the surface of RWM by PDA, and the microspheres are even still attached to the RWM after 360° rotation and inverted shaking. The in vivo imaging system shows that the adhesive microspheres can prolong the retention of the middle ear cavity for more than 7 days. The hearing of mice in the GM@PDA@Lipo-Ebselen group is significantly recovered, especially on day 14 after noise exposure, and the hearing of each frequency is restored to baseline level. At 32 kHz frequency, the survival of outer hair cells recovers from 48 0± 6% to 93 ± 2%. Therefore, the adhesive and injectable hydrogel microspheres provide a promising strategy for the treatment of hearing loss.

Hyaluronic acid-entecavir conjugates-core/lipid-shell nanohybrids for efficient macrophage uptake and hepatotropic prospects

Drug covalently bound to polymers had formed, lately, platforms with great promise in drug delivery. These drug polymer conjugates (DPC) boosted drug loading and controlled medicine release with targeting ability. Herein, the ability of entecavir (E) conjugated to hyaluronic acid (HA) forming the core of vitamin E coated lipid nanohybrids (EE-HA LPH), to target Kupffer cells and hepatocyte had been proved. The drug was associated to HA with efficiency of 93.48 ± 3.14 % and nanohybrids loading of 22.02 ± 2.3 %. DiI labelled lipidic nanohybrids improved the macrophage uptake in J774 cells with a 21 day hepatocytes retention post intramuscular injection. Finally, in vivo biocompatibility and safety with respect to body weight, organs indices and histopathological alterations were demonstrated. Coating with vitamin E and conjugation of E to HA (a CD44 ligand), could give grounds for prospective application for vectored nano-platform in hepatitis B.

Addressing the Shortcomings of Polyphenol-Derived Adhesives: Achievement of Long Shelf Life for Effective Hemostasis

For rapid and effective hemostasis of uncontrollable bleeding, versatile hemostatic agents have been emerging. Among them, polyphenol-derived adhesives have attracted those hemostatic materials due to instantaneous formation of sticky barriers by robust interactions between the material and the serum proteins from wound. However, a critical challenge in such phenolic materials lies in long-term storage due to spontaneous oxidation under humid environments, leading to changes in hemostatic capability and adhesive strength. Here, we report a transparent hemostatic film consisting of gallol-conjugated chitosan (CHI-G) for minimizing the phenolic oxidation even for 3 months and maintaining strong tissue adhesiveness and its hemostatic ability. The film undergoes a phase transition from solid to injectable hydrogels at physiological pH for efficiently stopping internal and external hemorrhage. Interestingly, the hemostatic capability of the CHI-G hydrogels after 3 month storage depends on (i) the folded microstructure of the polymer with optimal gallol modification and (ii) an initial phase of either a solution state or a solid film. When the hydrogels are originated from the dehydrated film, their successful hemostasis is observed in a liver bleeding model. Our finding would provide an insight for design rationale of hemostatic formulations with long shelf-life.

Multifunctional injectable hydrogel for effective promotion of cartilage regeneration and protection against osteoarthritis: combined chondroinductive, antioxidative and anti-inflammatory strategy

The regeneration of the articular cartilage defects is characterized by the improvement in the quality of the repaired tissue and the reduction in the potential development of perifocal osteoarthritis (OA). Usually, the injection of dexamethasone (Dex) in the OA joints slows down the progression of inflammation and relieves pain. However, the anti-inflammatory Dex injected in the joint cavity is rapidly cleared, leading to a poor therapeutic effect. Multifunctional hydrogels with simultaneous chondrogenic differentiation, antioxidative, and anti-inflammatory capacities may represent a promising solution. Therefore, in this work, a novel injectable hydrogel based on double cross-linking of Schiff base bonds and coordination of catechol-Fe was developed. The obtained hydrogel (Gel-DA/DOHA/DMON@Dex@Fe) possessed molding performance in situ, excellent mechanical strength, controllable biodegradability, the on-demand release of the drug, and biocompatibility. The hydrogel system stimulated the HIF-1α signaling pathway and suppressed inflammation thanks to the introduction of DMON@Fe, consequently facilitating chondrogenic differentiation. The synergistic anti-inflammatory effect together with the induction of chondrogenesis by Dex-loaded Gel-DA/DOHA/DMON@Fe hydrogel allowed the promotion of cartilage repair, as demonstrated by in vivo experiments. Hence, the proposed multifunctional scaffold provides a promising advancement in articular cartilage tissue engineering and may have great prospects in the prevention of OA.

Injectable multifunctional CMC/HA-DA hydrogel for repairing skin injury

Injectable Hydrogels with adhesive, antioxidant and hemostatic properties are highly desired for promoting skin injury repair. In this study, we prepared a multi-functional carboxymethyl chitosan/hyaluronic acid-dopamine (CMC/HA-DA) hydrogel, which can be crosslinked by horseradish peroxidase and hydrogen peroxide. The antioxidation, gelation time, degradability, rheology and antihemorrhagic properties of hydrogels can be finely tuned by varying composition ratio. The cytocompatibility test and hemolysis test confirmed that the designed hydrogel holds good biocompatibility. More importantly, the repair effect of the hydrogel on full-thickness skin injury model in mice was studied. The results of wound healing, collagen deposition, immunohistochemistry and immunofluorescence showed that CMC/HA-DA hydrogel could significantly promote angiogenesis and cell proliferation at the injured site. Notably, the inflammatory response can also be regulated to promote the repair of full-thickness skin defect in mice. Results indicate that this injectable CMC/HA-DA hydrogel holds high application prospect for promising wound healing.

Dopamine-conjugated hyaluronic acid delivered via intra-articular injection provides articular cartilage lubrication and protection

Due to its high molecular weight and viscosity, hyaluronic acid (HA) is widely used for viscosupplementation to provide joint pain relief in osteoarthritis. However, this benefit is temporary due to poor adhesion of HA on articular surfaces. In this study, we therefore conjugated HA with dopamine to form HADN, which made the HA adhesive while retaining its viscosity enhancement capacity. We hypothesized that HADN could enhance cartilage lubrication through adsorption onto the exposed collagen type II network and repair the lamina splendens. HADN was synthesized by carbodiimide chemistry between hyaluronic acid and dopamine. Analysis of Magnetic Resonance (NMR) and Ultraviolet spectrophotometry (Uv-vis) showed that HADN was successfully synthesized. Adsorption of HADN on collagen was demonstrated using Quartz crystal microbalance with dissipation (QCM-D). Ex vivo tribological tests including measurement of coefficient of friction (COF), dynamic creep, in stance (40 N) and swing (4 N) phases of gait cycle indicated adequate protection of cartilage by HADN with higher lubrication compared to HA alone. HADN solution at the cartilage-glass sliding interface not only retains the same viscosity as HA and provides fluid film lubrication, but also ensures better boundary lubrication through adsorption. To confirm the cartilage surface protection of HADN, we visualized cartilage wear using optical coherence tomography (OCT) and atomic force microscopy (AFM).

Polydopamine nanoparticles and hyaluronic acid hydrogels for mussel-inspired tissue adhesive nanocomposites

Bioadhesives are intended to facilitate the fast and efficient reconnection of tissues to restore their functionality after surgery or injury. The use of mussel-inspired hydrogel systems containing pendant catechol moieties is promising for tissue attachment under wet conditions. However, the adhesion strength is not yet ideal. One way to overcome these limitations is to add polymeric nanoparticles to create nanocomposites with improved adhesion characteristics. To further enhance adhesiveness, polydopamine nanoparticles with controlled size prepared using an optimized process, were combined with a mussel-inspired hyaluronic acid (HA) hydrogel to form a nanocomposite. The effects of sizes and concentrations of polydopamine nanoparticles on the adhesive profiles of mussel-inspired HA hydrogels were investigated. Results show that the inclusion of polydopamine nanoparticles in nanocomposites increased adhesion strength, as compared to the addition of poly (lactic-co-glycolic acid) (PLGA), and PLGA-(N-hydroxysuccinimide) (PLGA-NHS) nanoparticles. A nanocomposite with demonstrated cytocompatibility and an optimal lap shear strength (47 ± 3 kPa) was achieved by combining polydopamine nanoparticles of 200 nm (12.5% w/v) with a HA hydrogel (40% w/v). This nanocomposite adhesive shows its potential as a tissue glue for biomedical applications.

Surface Coating of Pulmonary siRNA Delivery Vectors Enabling Mucus Penetration, Cell Targeting, and Intracellular Radical Scavenging for Enhanced Acute Lung Injury Therapy

Pulmonary delivery of anti-inflammatory siRNA presents a promising approach for localized therapy of acute lung injury (ALI), while polycationic vectors can be easily trapped by the negatively charged airway mucin glycoproteins and arbitrarily internalized by epithelial cells with nontargetability for immunological clearance. Herein, we report a material, the dopamine (DA)-grafted hyaluronic acid (HA-DA), coating on an anti-TNF-α vector to address these limitations. HA-DA was simply synthesized and facilely coated on poly(β-amino ester) (BP)-based siRNA vectors via electrostatic attraction. The resulting HA-DA/BP/siRNA displayed significantly enhanced mucus penetration, attributable to the charge screen effect of HA-DA and the bioadhesive nature of the grafting DA. After transmucosal delivery, the nanosystem could target diseased macrophages via CD44-mediated internalization and rapidly escape from endo/lysosomes through the proton sponge effect, resulting in effective TNF-α regulation. Meanwhile, DA modification endowed the coating material with robust antioxidative capability to scavenge a broad spectrum of reactive oxygen/nitrogen species (RONS), which protected the lung tissue from oxidative damage and synergized with anti-TNF-α to inhibit a cytokine storm. As a result, a remarkable amelioration of ALI was achieved in a lipopolysaccharide (LPS)-stimulated mice model. This study provides a multifunctional coating material to facilitate pulmonary drug delivery for the treatment of lung diseases.

Dual-Targeted Fe₃O₄@MnO₂ Nanoflowers for Magnetic Resonance Imaging-Guided Photothermal-Enhanced Chemodynamic/Chemotherapy for Tumor

The construction of high-efficiency tumor theranostic platform will be of great interest in the treatment of cancer patients; however, significant challenges are associated with developing such a platform. In this study, we developed high-efficiency nanotheranostic agent based on ferroferric oxide, manganese dioxide, hyaluronic acid and doxorubicin (FMDH-D NPs) for dual targeting and imaging guided synergetic photothermal-enhanced chemodynamic/chemotherapy for cancer, which improved the specific uptake of drugs at tumor site by the dual action of CD44 ligand hyaluronic acid and magnetic nanoparticles guided by magnetic force. Under the acidic microenvironment of cancer cells, FMDH-D could be decomposed into Mn²⁺ and Fe²⁺ to generate •OH radicals by triggering a Fenton-like reaction and responsively releasing doxorubicin to kill cancer cells. Meanwhile, alleviating tumor hypoxia improved the efficacy of chemotherapy in tumors. The photothermal properties of FMDH generated high temperatures, which further accelerated the generation of reactive oxygen species, and enhanced effects of chemodynamic therapy. Furthermore, FMDH-D NPs proved to be excellent T₁/T₂-weighted magnetic resonance imaging contrast agents for monitoring the tumor location. These results confirmed the considerable potential of FMDH-D NPs in a highly efficient synergistic therapy platform for cancer treatment.

Versatile antibacterial surface with amphiphilic quaternized chitin-based derivatives for catheter associated infection prevention

Microbial colonization of catheter surfaces is responsible for most healthcare-associated infections. Quaternized chitin and chitosan have excellent antimicrobial and biocompatible properties and can be used to provide safe and prolonged protection for biomedical catheters. Herein, we prepared quaternized β-chitin derivative (QC)- and quaternized chitosan derivative (QCS)-based antimicrobial surfaces. The quaternized polysaccharides modified TPU surfaces exhibited hydrophilicity, good biocompatibility. Among these, QCS2-modified TPU exhibited excellent antibacterial properties against Gram-positive and Gram-negative bacteria, and prevented the adherence of bacteria compared with pristine TPU. The antibacterial activity of QCS2-modified surfaces maintained for 8 weeks under the condition of immersion in serum. An in vivo subcutaneous implantation experiment revealed 99.87% reduction of bacteria and reduced expression of inflammation-related factors in the surrounding tissue five days after implantation with QCS2-modified TPU. Therefore, quaternized polysaccharide-modified surfaces have promising potential in preventing medical catheter-associated infections.

Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting

Efficient wound treatments to target specific events in the healing process of chronic wounds constitute a significant aim in regenerative medicine. In this sense, nanomedicine can offer new opportunities to improve the effectiveness of existing wound therapies. The aim of this study was to develop catechol bearing polymeric nanoparticles (NPs) and to evaluate their potential in the field of wound healing. Thus, NPs wound healing promoting activities, potential for drug encapsulation and controlled release, and further incorporation in a hydrogel bioink formulation to fabricate cell-laden 3D scaffolds are studied. NPs with 2 and 29 M % catechol contents (named NP2 and NP29) were obtained by nanoprecipitation and presented hydrodynamic diameters of 100 and 75 nm respectively. These nanocarriers encapsulated the hydrophobic compound coumarin-6 with 70% encapsulation efficiency values. In cell culture studies, the NPs had a protective effect in RAW 264.7 macrophages against oxidative stress damage induced by radical oxygen species (ROS). They also presented a regulatory effect on the inflammatory response of stimulated macrophages and promoted upregulation of the vascular endothelial growth factor (VEGF) in fibroblasts and endothelial cells. In particular, NP29 were used in a hydrogel bioink formulation using carboxymethyl chitosan and hyaluronic acid as polymeric matrices. Using a reactive mixing bioprinting approach, NP-loaded hydrogel scaffolds with good structural integrity, shape fidelity and homogeneous NPs dispersion, were obtained. The in vitro catechol NPs release profile of the printed scaffolds revealed a sustained delivery. The bioprinted scaffolds supported viability and proliferation of encapsulated L929 fibroblasts over 14 days. We envision that the catechol functionalized NPs and resulting bioactive bioink presented in this work offer promising advantages for wound healing applications, as they: 1) support controlled release of bioactive catechol NPs to the wound site; 2) can incorporate additional therapeutic functions by co-encapsulating drugs; 3) can be printed into 3D scaffolds with tailored geometries based on patient requirements.

Recent developments in mussel-inspired materials for biomedical applications

Over the decades, researchers have strived to synthesize and modify nature-inspired biomaterials, with the primary aim to address the challenges of designing functional biomaterials for regenerative medicine and tissue engineering. Among these challenges, biocompatibility and cellular interactions have been extensively investigated. Some of the most desirable characteristics for biomaterials in these applications are the loading of bioactive molecules, strong adhesion to moist areas, improvement of cellular adhesion, and self-healing properties. Mussel-inspired biomaterials have received growing interest mainly due to the changes in mechanical and biological functions of the scaffold due to catechol modification. Here, we summarize the chemical and biological principles and the latest advancements in production, as well as the use of mussel-inspired biomaterials. Our main focus is the polydopamine coating, the conjugation of catechol with other polymers, and the biomedical applications that polydopamine moieties are used for, such as matrices for drug delivery, tissue regeneration, and hemostatic control. We also present a critical conclusion and an inspired view on the prospects for the development and application of mussel-inspired materials.

Polyelectrolyte Multilayer Films Based on Natural Polymers: From Fundamentals to Bio-Applications

Natural polymers are of great interest in the biomedical field due to their intrinsic properties such as biodegradability, biocompatibility, and non-toxicity. Layer-by-layer (LbL) assembly of natural polymers is a versatile, simple, efficient, reproducible, and flexible bottom-up technique for the development of nanostructured materials in a controlled manner. The multiple morphological and structural advantages of LbL compared to traditional coating methods (i.e., precise control over the thickness and compositions at the nanoscale, simplicity, versatility, suitability, and flexibility to coat surfaces with irregular shapes and sizes), make LbL one of the most useful techniques for building up advanced multilayer polymer structures for application in several fields, e.g., biomedicine, energy, and optics. This review article collects the main advances concerning multilayer assembly of natural polymers employing the most used LbL techniques (i.e., dipping, spray, and spin coating) leading to multilayer polymer structures and the influence of several variables (i.e., pH, molar mass, and method of preparation) in this LbL assembly process. Finally, the employment of these multilayer biopolymer films as platforms for tissue engineering, drug delivery, and thermal therapies will be discussed.

Self-crosslinkable hyaluronate-based hydrogels as a soft tissue filler

With increasing interest in aging and skin care, the use of fillers to increase the volume of soft tissue volume is increasing globally. However, the side effects caused by the residual chemical crosslinking agents present in these fillers limit the effective application of commercialized filler products. Therefore, the development of a novel crosslinking system with a non-toxic chemical crosslinking agent is required to overcome the limitations of commercial hyaluronate (HA)-based fillers. In this paper, a new injectable hydrogel with enhanced mechanical properties, tissue adhesion, injectability, and biocompatibility is reported. The HA derivatives modified with catechol groups (HA-DA) were crosslinked by self-oxidation under in vivo physiological conditions (pH 7.4) without chemical crosslinkers to form hydrogels, which can be further accelerated by the dissolved oxygen in the body. The fabricated HA-DA filler showed excellent mechanical properties and could be easily injected with a low injection force. Further, the HA-DA filler stably attached to the injection site due to the tissue adhesion properties of the catechol groups, thus leading to an improved displacement stability. In addition, the HA-DA filler showed excellent cell viability, cell proliferation, and biocompatibility. Therefore, the HA-DA hydrogel is a novel soft tissue filler with great potential to overcome the limitations of commercial soft tissue fillers.

Gelatin-based adhesive hydrogel with self-healing, hemostasis, and electrical conductivity

As a kind of natural protein derived material, gelatin has been widely used in the preparation of medical hydrogels due to its good biocompatibility, non-immunogenicity and the ability of promoting cell adhesion. Functionalization of gelatin-based hydrogels is a hot topic in research and its clinic application. Herein, a novel gelatin-based adhesive hydrogel was prepared via mussel-inspired chemistry. Gelatin was firstly functionalized by dopamine to form dopamine grafted gelatin (GelDA). After the mixture with 1,4-phenylenebisboronic acid and graphene oxide (GO), the GelDA/GO hydrogels were obtained by H₂O₂/HRP (horseradish peroxidase) catalytic system. Based on the self-healing and tissue adhesion of the hydrogels, the hemostatic property has been exhibited in the rat hepatic hemorrhage model. Additionally, the incorporation of GO endowed conductivity and enhanced the mechanical property of GelDA/GO hydrogels. The electromyography (EMG) signals of finger movement were successfully monitored by using hydrogel as the adhesive electrodes of EMG monitor. L929 cell experiments showed that the hydrogels had good cytocompatibility. The results indicated the potential application of GelDA/GO hydrogels in tissue adhesives, wound dressings, and wearable devices.

Bioinspired polysaccharide hybrid hydrogel promoted recruitment and chondrogenic differentiation of bone marrow mesenchymal stem cells

Cartilage regeneration by biomimetic cartilage matrix with synchronously recruited stem cells was one of ideal strategies. Inspired by catechol for proteins adhesion, dopamine modified polysaccharide hybrid hydrogel (HD-C) was prepared by integrating collagen I (Col I) and hyaluronic acid derivatives (HA-DN) with sulfhydryl modified polysaccharide hybrid hydrogel (HS-C) as control. Because of double-crosslinking architecture, HD-C hydrogel was endowed with a more compact pore structure, higher mechanical properties and water retention ability in comparison with those of HS-C hydrogel. Meanwhile, it significantly promoted the proliferation and spread of rabbit bone marrow stem cells (rBMSCs), and accelerated cartilaginous matrix secretion. RT-PCR results also verified higher related gene expression of chondrogenesis (Sox 9, Agg and Col II). Moreover, HD-C hydrogel could enhance the enrichment and migration of rBMSCs in vitro by potential functional protein adsorption mechanisms, and this phenomenon was further confirmed by more rBMSCs migration in short-term joint implantation experiments in vivo.

Encapsulation and pH-responsive release of bortezomib by dopamine grafted hyaluronate nanogels

Hydrophobic drugs loaded nanogels were always associated with low encapsulation efficiency and immature burst release. In this work, dopamine grafted hyaluronate nanogels were designed for bortezomib (BTZ), a hydrophobic anticancer drug and a proteasome inhibitor. It was found that there was a more efficient loading and pH-controlled release of BTZ due to the presence of dopamine groups on the skeleton of the nanogels. The drug loading content (DLC) were up to 8.58% as the nanogels modified with 29% dopamine, compared to the DLC of less than 1% for nanogels without dopamine modification. It was the pH-sensitive nature of the borated bonds between BTZ and catechol groups that endowed the pH-responsive release behavior of BTZ in vitro. In vitro study proved good biocompatibility and efficient cell uptake of the nanogels. In vivo anti-tumor experiments demonstrated that bortezomib loading into the nanogel significantly enhanced the therapeutic effect of the drug. After 14-day treatment, the average tumor volume of BTZ loaded nanogel group was reduced by 200% more than that of free BTZ group. Combined with CD44 receptor targeting ability of hyaluronate and the merits of nanogel, the catechol modified hyaluronate nanogel exhibited as an efficient chemotherapeutic formulation of BTZ for cancer treatment.

A physicochemical double cross-linked multifunctional hydrogel for dynamic burn wound healing: shape adaptability, injectable self-healing property and enhanced adhesion

Burn wounds are one of the most destructive skin traumas that cause more than 180000 deaths each year. Patients with large, irregular burn wounds suffer from slow healing. Dynamic burn wounds have special requirements for hydrogel dressing due to their high frequency movement. To focus on dynamic burn wounds, we designed a novel double cross-linked hydrogel prepared by Schiff base and catechol-Fe³⁺ chelation bond. The unique double cross-linked structure of the hydrogel resulted in better physicochemical properties and enhanced efficacy. The enhanced physicochemical properties, such as faster gelation time (52 ± 2 s), stronger mechanical property (535 kPa of G'), enhanced adhesive strength (19.3 kPa) and better self-healing property, made the hydrogel suitable for dynamic wounds. The excellent shape adaptability (97.1 ± 1.3% of recovery) made the hydrogel suitable for wounds with irregular shapes. The hydrogel exhibited not only biodegradability during the wound healing process but also superior inherent antibacterial activity (100% killing ratio) and hemostatic property. The results showed that the hydrogel shortened the healing time of burn wounds to 13 days, and accelerated the reconstruction of skin structure and function. This double cross-linked multifunctional hydrogel is a promising candidate as a dynamic burn wound dressing.

Phenolic-enabled nanotechnology: versatile particle engineering for biomedicine

Phenolics are ubiquitous in nature and have gained immense research attention because of their unique physiochemical properties and widespread industrial use. In recent decades, their accessibility, versatile reactivity, and relative biocompatibility have catalysed research in phenolic-enabled nanotechnology (PEN) particularly for biomedical applications which have been a major benefactor of this emergence, as largely demonstrated by polydopamine and polyphenols. Therefore, it is imperative to overveiw the fundamental mechanisms and synthetic strategies of PEN for state-of-the-art biomedical applications and provide a timely and comprehensive summary. In this review, we will focus on the principles and strategies involved in PEN and summarize the use of the PEN synthetic toolkit for particle engineering and the bottom-up synthesis of nanohybrid materials. Specifically, we will discuss the attractive forces between phenolics and complementary structural motifs in confined particle systems to synthesize high-quality products with controllable size, shape, composition, as well as surface chemistry and function. Additionally, phenolic's numerous applications in biosensing, bioimaging, and disease treatment will be highlighted. This review aims to provide guidelines for new scientists in the field and serve as an up-to-date compilation of what has been achieved in this area, while offering expert perspectives on PEN's use in translational research.

Electrical and visible light dual-responsive ZnO nanocomposite with multiple wound healing capability

The healing process of open wounds is a competition between cells and bacteria. Therefore, a strategy that can quickly remove bacteria and promote cell proliferation to accelerate wound healing is urgently needed. Inspired by photoelectric synergy tactics, we improved both the optical and electrical response of zinc oxide (ZnO) through the modification of polydopamine (PDA) and reduced graphene oxide (rGO), thus obtaining a ZnO composite named PDA-rGO-ZnO (PrZ). Combined with the photoelectric double stimulation, the sterilization target could be completed from multiple physical levels simultaneously. More importantly, the band gap of ZnO was considerably narrowed by PDA encapsulation. The encapsulated ZnO thus could be effectively excited by pure yellow light (YL) with a moderate long wavelength, which fundamentally improved its safety in exerting photocatalytic antibacterial properties. In addition, we found that electrical stimulation (ES) could not only help to clear bacteria, but also facilitate the formation of new blood vessels. Animal experiments further showed that PrZ efficaciously regulated the immune response around the wound surface, promoted cell proliferation and the formation of collagen fibers, thereby accelerating wound healing.

Cartilage lamina splendens inspired nanostructured coating for biomaterial lubrication

Biomaterials that are used in biological systems, such as polycarbonate urethane (PCU) knee joint implants and contact lenses, generally lack lubrication. This limits their integration with the body and impedes their function. Here, we propose a nanostructured film based on hydrophilic polysaccharide hyaluronic acid conjugated with dopamine (HADN) and zwitterionic reduced glutathione (Glu), which forms a composite coating (HADN-Glu) to enhance the lubrication between cartilage and PCU. HADN was synthesized by carbodiimide chemistry between hyaluronic acid and dopamine and deposited on PCU surface under mild oxidative conditions. Then, zwitterionic peptide-reduced glutathione was bioconjugated to HADN, forming a lubrication film. Analysis based on X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and wettability indicated that HADN and Glu had grafted successfully onto the PCU surface. Measurements of the coefficient of friction (COF), friction energy dissipation and cartilage roughness indicated that cartilage was effectively protected by the high lubrication of HADN-Glu. Both at low and high applied loads, this effect was likely due to the enhanced boundary lubrication enabled by HADN-Glu on the PCU surface. Moreover, HADN-Glu is highly biocompatible with chondrocyte cells, suggesting that this film will benefit the design of implants where lubrication is needed.

Dopamine-Functionalized Gellan Gum Hydrogel as a Candidate Biomaterial for a Retinal Pigment Epithelium Cell Delivery System

In this study, dopamine-functionalized gellan gum (DFG) hydrogel was prepared as a carrier for retinal pigment epithelium (RPE) cell delivery via a carbodiimide reaction. The carboxylic acid of gellan gum (GG) was replaced with catechol in a 21.3% yield, which was confirmed by NMR. Sol fraction and weight loss measurements revealed that dopamine improved degradability in the GG hydrogel. Measurements of the viscosity, injection force, and compressibility also showed that dopamine-functionalized GG hydrogels had more desirable rheological/mechanical properties for improving injectability. These characteristics were confirmed to arise from the GG's helix structure loosened by the dopamine's bulky nature. Moreover, dopamine's hydrophilic characteristics were confirmed to create a more favorable microenvironment for cell growth by promoting swelling capability and cell attachment. This improved biocompatibility became more pronounced when the hydrophilicity of dopamine was combined with a larger specific surface area stemming from the less porous structure of the dopamine-grafted hydrogels. This effect was apparent from the live/dead staining images of the as-prepared hydrogels. Meanwhile, the nonionic cross-linked DFG (DG) hydrogel showed the lowest protein expression in the immunofluorescence staining images obtained after 28 days of culture, supporting that it had the highest degradability and associated cell-releasing ability. That tendency was also observed in the gene expression data acquired by real-time polymerase chain reaction (RT-PCR) analysis. RT-PCR analysis also revealed that the DG hydrogel carrier could upregulate the visual function-related gene of RPE. Overall, the DG hydrogel system demonstrated its feasibility as a carrier of RPE cells and its potential as a means of improving visual function.

Serially pH-Modulated Hydrogels Based on Boronate Ester and Polydopamine Linkages for Local Cancer Therapy

Elaborately and serially pH-modulated hydrogels possessing optimized viscoelastic natures for short gelation time and single syringe injection were designed for peritumoral injection of an anticancer agent. Boronate ester bonds between phenylboronic acid (PBA) (installed in HA-PBA (HP)) and dopamine (included in HA-dopamine (HD)) along with self-polymerization of dopamine (via interactions between HD conjugates) were introduced as the main cross-linking strategies of a hyaluronic acid (HA) hydrogel. Considering pK_a values (8.0-9.5) of PBA and dopamine, the pH of each polymer dispersion was controlled elaborately for injection through a single syringe, and the final pH was tuned nearby the physiological pH (pH 7.8). The shear-thinning behavior, self-healing property, and single syringe injectability of a designed hydrogel cross-linked nearby physiological pH may provide its convenient application to peritumoral injection and prolonged retention in local cancer therapy. Erlotinib (ERT) was encapsulated in a microsphere (MS), and it was further embedded in an HP/HD-based hydrogel for sustained and locoregional delivery. A rheologically tuned hydrogel containing an ERT MS exhibited superior tumor-suppressive efficiencies compared to the other groups in A549 tumor-bearing mice. A designed injectable hydrogel through a single syringe system may be efficiently applied to local cancer therapy with lower toxicities to healthy organs.

Magnetic Polydopamine Modified with Choline-Based Deep Eutectic Solvent for the Magnetic Solid-Phase Extraction of Sulfonylurea Herbicides in Water Samples

A novel magnetic solid-phase extraction technique coupled to ultraperformance liquid chromatography has been developed for separation and preconcentration of four sulfonylurea herbicides (sulfosulfuron, bensulfuron-methyl, pyrazosulfuron-ethyl and halosulfuro-methyl) in aqueous samples. The key point of this method was the application of a novel magnetic nanomaterial that composed of a low eutectic solvent as a shell coated on the magnetic core modified by polydopamine. The extensive active sites outside the low eutectic solvent can effectively adsorb the target herbicide in the extraction process. The obtained magnetic adsorbent was characterized with fourier transform infrared spectrometry, scanning electron microscopy and vibrating sample magnetometer. The influence parameters relevant to this method were optimized. Under the optimum conditions, good linearities could be obtained within the range of 1.0-200 μg L-1 for all analytes, with correlation coefficients ≥0.9908. The limit of detections of the method was between 0.0074 and 0.0100 μg L-1 and the relative standard deviations were 1.1-3.6%. The enrichment factor is 66.6. In the final experiment, the proposed method was successfully applied to the analysis of sulfonylurea herbicides residue in environment and drinking-water samples, and the obtained recoveries were between 70.6% and 109.4%.

Adhesive Catechol-Conjugated Hyaluronic Acid for Biomedical Applications: A Mini Review

Recently, catechol-containing polymers have been extensively developed as promising materials for surgical tissue adhesives, wound dressing, drug delivery depots, and tissue engineering scaffolds. Catechol conjugation to the polymer backbone provides adhesive properties to the tissue and does not significantly affect the intrinsic properties of the polymers. An example of a catecholic polymer is catechol-conjugated hyaluronic acid. In general, hyaluronic acid shows excellent biocompatibility and biodegradability; thus, it is used in various medical applications. However, hyaluronic acid alone has poor mechanical and tissue adhesion properties. Catechol modification considerably increases the mechanical and underwater adhesive properties of hyaluronic acid, while maintaining its biocompatibility and biodegradability and enabling its use in several biomedical applications. In this review, we briefly describe the synthesis and characteristics of catechol-modified hyaluronic acid, with a specific focus on catechol-involving reactions. Finally, we discuss the basic concepts and therapeutic effects of catechol-conjugated hyaluronic acid for biomedical applications.