Carbon-Based Sorbents with Three-Dimensional Architectures for Water Remediation

Water-Based Route for Dopamine and Reduced Graphene Oxide Aerogel Production

Water pollution caused by domestic waste oil and accidents with oil/organic spill needs immediate remediation, as such a pollution causes serious threats to health and the environment. Development of absorbent materials for the treatment of oil-polluted waters in a green and energy-efficient manner is highly desired. In this study, a green and simple strategy is proposed to prepare aerogels by hydrothermal reaction of graphene oxide (GO) dispersions using dopamine (DOPA) as the cross-linker. Concentrations of GO and DOPA were changed to determine their effects on absorption capacities. Aerogels produced had low densities ranging from 2.90 to 4.34 mg/cm3. Various organics, diesel oil, and sunflower oil were used to evaluate the absorption capacity of aerogels. It was observed that even with a mild thermal reduction at 150 °C, aerogels exhibited very high absorption capacities of up to 445 mg/mg. The produced aerogels showed high reusability (80%) and structural stability even after 10 absorption/desorption cycles. They possess great potential in oil/organic removal and water treatment based on their high absorption capacities and performances in separating organics/liquids from water.

A Conjugated Microporous Polymer/Wood Aerogel with Physical Adsorption, Chemical Degradation and Antibacterial Self-Cleaning Triple Sewage Treatment Functions

Conjugated microporous polymers (CMPs) have important applications in the fields of optoelectronics and sewage treatment due to their high specific surface area, broad visible absorption, processability and simple synthesis process. Biocompatibility, recycling, mass production and solar photodegradation are particularly important in wastewater treatment. Here, A CMP with a high specific surface area and a hierarchical pore structure (CPOP) was constructed based on 4,4',4″-Tris(carbazol-9-yl)-triphenylamine (3CZ-TPA). Furthermore, a CMP-loaded wood aerogel (CPOP/wood aerogel) with physical adsorption, chemical degradation, bacterial inhibition and self-cleaning properties was prepared by in situ polymerization and used for wastewater treatment. The obtained CPOP/wood aerogel is highly biocompatible and easy to recycle. In addition, the inherent broad visible light absorption property of CPOP endows it with promising photocatalytic properties. Subsequently, we investigated the photocatalytic mechanism of CPOP, and the results showed that it was mainly affected by peroxyl radicals, which implied and confirmed its microbial self-cleaning for secondary cleaning of water pollutants. The reported studies on CPOP/wood aerogel provide a new direction for water purification materials with excellent adsorption, degradation and antibacterial properties.

Functional Carbon from Nature: Biomass-Derived Carbon Materials and the Recent Progress of Their Applications

Biomass is considered as a promising source to fabricate functional carbon materials for its sustainability, low cost, and high carbon content. Biomass-derived-carbon materials (BCMs) have been a thriving research field. Novel structures, diverse synthesis methods, and versatile applications of BCMs have been reported. However, there has been no recent review of the numerous studies of different aspects of BCMs-related research. Therefore, this paper presents a comprehensive review that summarizes the progress of BCMs related research. Herein, typical types of biomass used to prepare BCMs are introduced. Variable structures of BCMs are summarized as the performance and properties of BCMs are closely related to their structures. Representative synthesis strategies, including both their merits and drawbacks are reviewed comprehensively. Moreover, the influence of synthetic conditions on the structure of as-prepared carbon products is discussed, providing important information for the rational design of the fabrication process of BCMs. Recent progress in versatile applications of BCMs based on their morphologies and physicochemical properties is reported. Finally, the remaining challenges of BCMs, are highlighted. Overall, this review provides a valuable overview of current knowledge and recent progress of BCMs, and it outlines directions for future research development of BCMs.

Solar light-based advanced oxidation processes for degradation of methylene blue dye using novel Zn-modified CeO2@biochar

Herein, a novel nanocomposite, namely, Zn-modified CeO₂@biochar (Zn/CeO₂@BC), is synthesized via facile one-step sol-precipitation to study its photocatalytic activity towards the removal of methylene blue dye. Firstly, Zn/Ce(OH)₄@biochar was precipitated by adding sodium hydroxide to cerium salt precursor; then, the composite was calcined in a muffle furnace to convert Ce(OH)₄ into CeO₂. The crystallite structure, topographical and morphological properties, chemical compositions, and specific surface area of the synthesized nanocomposite are characterized by XRD, SEM, TEM, XPS, EDS, and BET analysis. The nearly spherical Zn/CeO₂@BC nanocomposite has an average particle size of 27.05 nm and a specific surface area of 141.59 m²/g. All the tests showed the agglomeration of Zn nanoparticles over the CeO₂@biochar matrix. The synthesized nanocomposite showed remarkable photocatalytic activity towards removing methylene blue, an organic dye commonly found in industrial effluents. The kinetics and mechanism of Fenton-activated dye degradation were studied. The nanocomposite exhibited the highest degradation efficiency of 98.24% under direct solar irradiation of 90 min, at an optimum dosage of 0.2 g l^-1 catalyst and 10 ppm dye concentration, in the presence of 25% (V/V) 0.2 ml (4 µl/ml) hydrogen peroxide. The hydroxyl radical generated from H₂O₂ during the photo-Fenton reaction process was attributed to the nanocomposite's improved photodegradation performance. The degradation process followed pseudo-first-order kinetics having a rate constant (k) value of 0.0274 min^-1.

Iodide Removal by Resorcinol-Formaldehyde Carbon Aerogels

The adsorption technique is widely used in water purification, and its efficiency can be significantly improved by target-specific adsorbent design. Research on iodine and its ion removal from water has attracted a great deal of interest due to increased concentrations in the environment and acute toxic effects, e.g., in human thyroid cells. In this work, the iodide removal performance of two high-surface-area resorcinol-formaldehyde-based carbon aerogels was studied under acidic conditions. The BET surface area was 790 m²/g (RF_ac) and 375 m²/g (RMF-GO), with a corresponding micropore ratio of 36 and 26%, respectively. Both aerogels showed outstanding adsorption capacity, exceeding the reported performance of other carbons and Ag-doped materials. Owing to its basic nature, the RMF-GO carbon aerogel showed higher I^- capacity, up to 97 mg/g, than the acidic RF_ac, which reached a capacity of 82 mg/g. The surface chemistry of the aerogels also played a distinct role in the removal. In terms of kinetics, RF_ac removed 60% of the iodide ions and RMF-GO 30% within 8 h. The removal kinetics was of the first order, with a half-life of 1.94 and 1.70 h, respectively.

Robust and Multifunctional 3D Graphene-Based Aerogels Reinforced by Hydroxyapatite Nanowires for Highly Efficient Organic Solvent Adsorption and Fluoride Removal

In view of the serious perniciousness and complex diversity of actual wastewater systems, exploiting a robust and multifunctional adsorbent material featuring high sorption efficiency, broad-spectrum applicability, and excellent recyclability in treating multifarious pollutants in water (such as oils and fluoride ions) is highly required; however, it is still a daunting goal to pursue to date. In this work, novel mechanically robust and exceptional graphene oxide/hydroxyapatite nanowire (GO/HAPNW) aerogels (RGHAs/polydopamine (PDA)@RGHAs) with adjustable surface wettability were developed through a facile sol-gel self-assembly technology and subsequently optional bioinspired hydrophilic modification. Thanks to the reinforcing effect of HAPNWs with higher aspect ratio, a remarkably improved mechanical robustness (including superior compressibility and superelasticity) was acquired for the resulting aerogels. Based on the cooperative effect of the favorable selective wetting properties (i.e., hydrophobic/oleophilic for RGHAs) and the excellent mechanic stability, the aerogels displayed an outstanding sorption performance for diverse oils/organic solvents accompanied with a prominent recyclability. Specifically, a fairly high adsorption capacity of as high as 191 times of its own mass (for pump oil) was achieved based on a fast adsorption kinetic process. More importantly, superamphiphilic three-dimensional (3D) PDA@RGHAs revealed an extraordinary removal capability for water-soluble fluoride ions, exhibiting a superior equilibrium adsorption capacity (q_e, 9.93 mg/g), which is distinctly superior to those of low-dimensional fluorine adsorbent materials recently reported. Accordingly, the as-prepared 3D aerogels combining both superior oil/organic solvent adsorption and excellent defluorination capability reveal a competitive application prospect toward effective intricate oily wastewater purification.

Highly efficient and rapid purification of organic dye wastewater using lignin-derived hierarchical porous carbon

Coating manufacturing, textile processing, and plastic industry have led to dramatical release levels of hazardous organic dye pollutants threatening public health and the environment. To solve this problem, porous carbon materials are being developed following with the United Nations initiative on water purification. However, conventional porous carbon materials face many challenges, such as limited removal rates, low adsorption capacity, and high chemicals consumption, hampering their large-scale utilization in dye wastewater treatment. Herein, we demonstrate a high-performance lignin-derived hierarchical porous carbon (LHPC) material directly prepared from renewable lignin through a low-cost activation procedure. The large specific surface area (1824 m²/g) enables the rapid and effective adsorption of organic dyes. Therefore, the LHPC exhibits an ultrahigh adsorption ability (1980.63 mg/g) and removal rate (99.03% in 10 min) for Azure B, superior to that of other adsorbents. Additionally, the LHPC adsorbent, organic dyes, eluting agent, and water all can be recycled and reused in a designed close-looped system. Its high removal ability and rate, strong retrievability, low-cost and scalable production combined with high dyes adsorption universality, positions our LHPC as a promising commercial adsorbent candidate for the purification of harmful organic dye wastewater, especially for heavily polluted area with an insistent demand for clear water.

Facile metal-free synthesis of pyrrolo[3,2-b]pyrrolyl-based conjugated microporous polymers for high-performance photocatalytic degradation of organic pollutants

An efficient and metal-free approach to the synthesis of new kinds of CMPs (pyrrolo[3,2-b]pyrrolyl-based CMPs) on a gram scale within a short time has been developed for remarkable adsorbent and photocatalytic degradation of organic pollutants.

Promoting the stability and adsorptive capacity of Fe3O4-embedded expanded graphite with an aminopropyltriethoxysilane-polydopamine coating for the removal of copper(ii) from water

In this study, three magnetic graphites, namely, EGF, GAF, and GFA + KH550, were prepared, which were loaded either with Fe₃O₄ or with Fe₃O₄ and PDA or with Fe₃O₄, PDA, and KH550 onto expanded graphite. ATR-FTIR, XRD, XPS, SEM, TEM, and TGA characterization results showed that EGF, GAF, and GFA + KH550 were successfully prepared. Under the same initial copper concentration, the removal rates of copper ions by EGF, GFA, and GFA + KH550 were 86.2%, 96.9%, and 97.0%, respectively and the hazard index reductions of the three adsorbents were 2191 ± 71 (EGF), 1843 ± 68 (GFA), and 1664 ± 102 (GFA + KH550), respectively. Therefore GFA + KH550 exhibited better removal of Cu(ii) than EGF and GFA, for PDA and KH550 provided more adsorption-active sites like –OH and –NH. Here, the adsorption of GFA + KH550 fitted the pseudo-second-order kinetic and Langmuir models well within the testing range, which means that adsorption occurs on a monolayer surface between Cu(ii) and the adsorption sites. The intraparticle diffusion model and various thermodynamic parameters demonstrated that Cu(ii) was adsorbed on GFA + KH550 mainly via external surface diffusion and that the process was both endothermic and spontaneous. Recycling experiments show that GFA + KH550 has a satisfactory recyclability, and the way of direct recovery by magnets exhibits good magnetic induction. GFA + KH550 was applied in lake water and artificial seawater samples, and exhibited better removal of copper than that in DI water under the same environmental conditions for the existence of macromolecular organic matter. Furthermore, the adsorption capacity of copper ions was not relative to the salinity of water. The application of GFA + KH550 demonstrated the potential for application in water treatment procedures.

In this study, three magnetic graphites, namely, EGF, GAF, and GFA + KH550, were prepared, which were loaded either with Fe₃O₄ or with Fe₃O₄ and PDA or with Fe₃O₄, PDA, and KH550 onto expanded graphite.

Efficient Removal of Chromium(VI) Using a Novel Waste Biomass Chestnut Shell-Based Carbon Electrode by Electrosorption

Biomass-derived porous carbon materials have a good application prospect in electrosorption because of their low cost, abundant natural resources, and excellent performance. In this work, three-dimensional interconnected structure porous carbon (CPC) was successfully synthesized from waste biomass chestnut shells by carbonization and chemical activation processes. The unique structure of CPC could offer superior double-layer capacitance and excellent conductivity. The as-obtained CPC was applied as an electrosorption electrode. In the deionization experiments, the removal efficiency of the CPC electrode in a 30 mg L^-1 chromium(VI) aqueous solution at 1.0 V was 90.5%. The electrosorption follows pseudo-second-order kinetics. The CPC electrode also presented good regeneration performance in the regeneration test. These results demonstrate that the as-prepared carbonaceous material is an ideal material for capacitive deionization electrodes.

Advances in decontamination of wastewater using biomass-basedcomposites: A critical review

Contaminant removal from wastewater using natural biosorbents has been widely studied as a suitable and environmentally benign alternative for conventional techniques. Currently, researchers are working on various biomass-based composites for wastewater remediation to improve the performance of natural biosorbents. This review takes into focus a wide range of biomass-based composites like hydrogel composites, metal oxide composites, magnetic composites, polymer composites, carbon nanotubes (CNTs) and graphene composites, metal organic framework composites (MOFs) and clay composites for the removal of various contaminants from wastewater. It is evident from the literature survey that the composite fabrication involves the modification of morphological and textural features of the biomass which results in significant enhancement of adsorption capacity. Apart from this, regeneration of the used biomass-based composite is also studied in depth in order to overcome the problem of solid waste generation. This review would prove to be beneficial for researchers who are currently focusing on the development of cost-effective, easily available, recyclable biomass-based composites with enhanced adsorption capacities for wastewater treatment.

Electrophoretic Deposition of Graphene Oxide on Stainless Steel Substrate

We demonstrated the deposition of the architecture of graphene oxide on stainless steel substrate and its potential environmental application. The synthesis and characterization of graphene oxide were described. The controlled formation of graphene oxide coatings in the form of the homogenous structure on stainless steel is demonstrated by scanning electron microscopy (SEM). The structure, morphology and properties of the material were assessed by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, transmission electron microscopy (TEM) and atomic force microscopy (AFM). The morphology and stability of these structures are shown to be particularly related to the pre-treatment of stainless steel substrate before the electrophoretic deposition. This approach opens up a new route to the facile fabrication of advanced electrode coatings with potential use in environmental applications.

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe3O4 composites (Fe3O4@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe3O4) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe3O4@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe3O4@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe3O4@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe3O4@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g-1 of Cd (II). The adsorption of Cd (II) on the Fe3O4@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.

Hydrogen Nanometrology in Advanced Carbon Nanomaterial Electrodes

A comparative experimental study between advanced carbon nanostructured electrodes, in similar hydrogen uptake/desorption conditions, is investigated making use of the recent molecular beam-thermal desorption spectrometry. This technique is used for monitoring hydrogen uptake and release from different carbon electrocatalysts: 3D-graphene, single-walled carbon nanotube networks, multi-walled carbon nanotube networks, and carbon nanotube thread. It allows an accurate determination of the hydrogen mass absorbed in electrodes made from these materials, with significant enhancement in the signal-to-noise ratio for trace hydrogen avoiding recourse to ultra-high vacuum procedures. The hydrogen mass spectra account for the enhanced surface capability for hydrogen adsorption in the different types of electrode in similar uptake conditions, and confirm their enhanced hydrogen storage capacity, pointing to a great potential of carbon nanotube threads in replacing the heavier metals or metal alloys as hydrogen storage media.

Functional Porous Organic Polymers with Conjugated Triaryl Triazine as the Core for Superfast Adsorption Removal of Organic Dyes

Developing efficient adsorbents for the removal of water pollutants is of great significance for environmental protection. In this study, conjugated triaryl triazines (CTT), containing intramolecular hydrogen-bonding patterns, were recognized to be intriguing building blocks for the construction of porous organic polymer (POP) adsorbents. These planar monomers with multiple phenolic hydroxyl groups facilitated the formation of aza-linked polymers with hierarchical porous structures, sheet-like morphology, good surface wettability, and high degree of functionality. Such structural characteristics of the CTT-POP adsorbents provided superfast adsorption of various cationic dyes from water. For the adsorption of methylene blue dye, the pseudo-second-order rate constant of CTT-POP-1 is 12.9 g mg^-1 min^-1, superior to those reported in the existing literature. In addition, CTT-POP-1 can be regenerated at least seven times with no loss in performance, indicating its potential application in water treatment.

Three dimensional graphene materials doped with heteroatoms for extraction and adsorption of environmental pollutants in wastewater

Environmental pollution by heavy metal ions, organic pollutants, oils, pesticides or dyes is a ubiquitous problem adversely affecting human health and environmental ecology. Development and application novel adsorbents in full-scale treatment systems with effectiveness properties could effective ways to facilitate the extraction and adsorption of environment pollutants from wastewater. Graphene materials have drawn much attention due to their extraordinary electron mobilities, high surface areas, good thermal conductivities, and excellent mechanical properties. Three-dimensional graphene materials can provide the inherent advantages of 2D graphene sheets and exhibit micro/nanoporous structures, increased specific surface areas, high electron conductivities, fast mass transport kinetics, and strong mechanical strength. Potential applications for 3D graphene materials include environmental remediation, chemical and biological sensing, catalysis, and super capacitors. Recent advances in the applications of 3D functionalized graphene materials (3D FGMs) doped with heteroatoms for the extraction and adsorption of environmental pollutants in wastewater are summarized in this review.

Bio-mass derived functionalized graphene aerogel: a sustainable approach for the removal of multiple organic dyes and their mixtures

Herein, fabrication of a functionalized graphene aerogel (f-GA) from a biomass (pear fruit)-derived graphene aerogel (GA) is described. f-GA is showing better adsorption capacity towards CV, MB and RhB dyes than GA and activated charcoal.

Metal oxide decorated porous carbons from controlled calcination of a metal-organic framework

Thermal decomposition of an iron-based MOF was conducted under controlled gas environments to understand the resulting porous carbon structure. Different phases and crystallite sizes of iron oxide are produced based on the specific gas species. In particular, air resulted in iron(iii) oxide, and D₂O and CO₂ resulted in the mixed valent iron(ii,iii) oxide. Performing the carbonization under non-oxidative or reducing conditions (N₂, He, H₂) resulted in the formation of a mixture of both iron(ii,iii) oxide and iron(iii) oxide. Based on in situ and air-free handling experiments, it was observed that this is partially due to the formation of zero-valent iron metal that is rapidly oxidized when exposed to air. Neutron pair distribution function analysis provided insight into the effect of the gas environment on the local structure of the porous carbon, indicating a noticeable change in local order between the D₂O and the N₂ calcined samples.

Honeycomb-like structure-tunable chitosan-based porous carbon microspheres for methylene blue efficient removal

Chitosan (CS) can be used for the preparation of carbon materials with different morphologies due to its excellent properties, but there are no reports on its spherical morphology. In this study, a feasible step-by-step strategy was proposed to fabricate nitrogen-containing chitosan-based porous carbon microspheres (CPCM) in HCl and KOH. The unique spherical morphology and honeycomb-like porous structure of CPCM were accurately regulated. A great quantity of micro/mesopores endowed CPCM an ultra-high specific surface area up to 2463.9 m² g^-1. Moreover, CPCM exhibited an ultra-high maximum adsorption capacity up to 1599.03 mg g^-1 for methylene blue (MB), meanwhile the adsorption process was in well agreement with the Langmuir isotherm and pseudo-second-order kinetic models. It was simultaneously a favorable reusable adsorbent with high regenerative capacity. The high dye adsorption properties suggest that chitosan can be a promising candidate for sewage treatment in the form of carbon microspheres.

Synthesis and Characterization of Magnetic Superadsorbent Fe3O4-PEG-Mg-Al-LDH Nanocomposites for Ultrahigh Removal of Organic Dyes

Considering the huge demands for economical and reliable eco-remediation applications, the goal of the present work is to synthesize cost-effective and functionally efficient magnetic layered nanocomposite adsorbents for the effective adsorption of dyes followed by easy separation from wastewater. This would ensure good reusability of adsorbents without altering its adsorption capacity in a relatively short time manner. To achieve this, different molecular weights of polyethylene glycol (PEG)-modified Fe₃O₄ combined with Mg-Al-layered double hydroxides (MAN-LDH) were synthesized and characterized using powder X-ray diffraction, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, differential thermal analysis, energy-dispersive X-ray, and inductively coupled plasma optical emission spectroscopy. The efficacy of various adsorption parameters for the removal of methyl orange (MO) from water using Fe₃O₄-PEG-Mg-Al-LDH (FPL) adsorbents with different molecular weights of PEG (2FPL, 4FPL, and 6FPL) were investigated, and the results were compared. The maximum adsorption capacities of 2FPL, 4FPL, and 6FPL for MO were found to be 775.19, 826.44, and 833.33 mg/g, respectively. Detailed adsorption studies confirm that the higher adsorption capacity of 6FPL is due to the fast exchange of anions (NO₃ ^-) by MO in the interlayers of MAN-LDH, larger surface area, hydrogen bonding, and electrostatic interaction between adsorbate and adsorbent. The thermodynamic data indicate that the adsorption behavior is spontaneous and endothermic in nature. The reusability of all FPL adsorbents is observed to be excellent. The MAN-LDH recoated after the 31st-cycle nanocomposites show a recovery of 100% adsorption efficiency, similar to the freshly prepared 6FPL. Such systematic studies greatly help in advancing the applications of newly functionalized nanomaterials toward eco-remediation approaches.

Willow Catkins-Derived Porous Carbon Membrane with Hydrophilic Property for Efficient Solar Steam Generation

Biomass wastes are abundant and common in our daily life, and they are cost-effective, promising, and renewable. Herein, collected willow catkins were used to prepare a hydrophilic biochar composite membrane, which was placed in a tree-like evaporation configuration to simulate a natural transpiration process. The strong light absorption (∼96%) of the biochar layer could harvest light and convert it into thermal energy, which then is used to heat the surrounding water pumped by a porous water channel via capillary action. A hydrophilic light-absorber layer remarkably increased the attachment sites of water molecules, thereby maximizing the use of thermal energy. At the same time, hierarchically porous structure and large specific surface area (∼1380 m² g^-1) supplied more available channels for rapid water vapor diffusion. The as-prepared composite membrane with a low-cost advantage realized a high evaporation rate (1.65 kg m^-2 h^-1) only under 1 sun illumination (1 kW m^-2), which was improved by roughly 27% in comparison with the unmodified hydrophobic composite membrane. The tree-like evaporation configuration with excellent heat localization resulted in the evaporator achieving a high solar-to-vapor conversion efficiency of ∼90.5%. Besides, the composite membrane could remove 99.9% sodium ions from actual seawater and 99.5% heavy metal ions from simulated wastewater, and the long-term stable evaporation performance proved its potential in actual solar desalination. This work not only fabricated an efficient evaporator but also provided a strategy for reusing various natural wastes for water purification.

Nanotechnology-based sorption and membrane technologies for the treatment of petroleum-based pollutants in natural ecosystems and wastewater streams

Petroleum processing wastewater (PPW) is a complex mixture of free, soluble, and emulsive hydrocarbons that often contain heavy metals and/or solid particles. As these hazardous constituents can accumulate in human beings and the environment, exposure to the PPW can have harmful effects in various respects. The use of environmental nanotechnologies (E-Nano) is considered an attractive option to resolve the problems associated with PPW. Among different treatment technologies, E-Nano-based sorption (adsorption/absorption) and membrane filtration approaches have been proven to have outstanding efficacy in remediation of PPW pollutants. It is, however, crucial to determine the appropriate technological option (e.g., low-cost operational conditions) for the practical application of such technologies. In this review, the potential of E-Nano-based sorption and membrane technologies in the treatment of various PPW pollutants is discussed based on their performances in comparison to traditional technologies. Their suitability is evaluated further in relation to their merits/disadvantages and economic feasibility with the goal of constructing a perspective map to efficiently implement the E-Nano technologies.

Green Synthesis of Composite Graphene Aerogels with Robust Magnetism for Effective Water Remediation

Graphene-based three-dimensional (3D) magnetic assemblies have attracted great research attention owing to their multiple natures inherited from 3D graphene assemblies and magnetic materials. However, at present, the practical applications of graphene-based magnetic materials are limited by the relative complex synthesis procedure and harsh operation conditions. Hence, a facile and green synthesis strategy is highly desired. Herein, a magnetic graphene aerogel with magnetite nanoparticles in-situ synthesized on the surface of its frameworks was fabricated through a green and facile strategy. The synthesis process was performed in a gentle condition with low energy consumption. The obtained graphene aerogels exhibited superior magnetism with a saturation magnetization of 55.7 emu·g-1. With the merits of well-developed pore structures, high surface area, and robust magnetic property, the obtained composite aerogels exhibited intriguing adsorption and photo-Fenton catalytic degradation performances for the organic dyes in water. Moreover, the utilized graphene aerogels could be recycled from the water due to their effective magnetic separation performance, indicating a promising capability for practical applications in the area of water remediation. We anticipate this synthesis strategy could provide some guidance for the design and development of 3D magnetic assemblies.

Improvement in Heavy Metal Removal from Wastewater Using an External Magnetic Inductor

Magnetite nanoparticles (Fe₃O₄) of 12 ± 4 nm diameter are electrochemically synthesized for the adsorption and magnetic harvesting of Cr(VI) from contaminated simulated solutions. The removal of Cr(VI) from aqueous media follows pseudo-second-order kinetics. The adsorption efficiency is evaluated in three different scenarios. In standard conditions, i.e., at room temperature; in a thermal bath working at 60 °C, where the temperature could be considered homogeneous within the solution; and finally, under magnetic induction heating, while adjusting the frequency and magnetic field used to attain the same temperature as in the bath experiments. Two benefits of using a magnetic inductor are demonstrated. First, the removal efficiency is almost doubled in comparison to that of the room temperature experiments, and it is higher by 30% compared to that of the bath setup. At the same time as the adsorption occurs, a redox reaction occurs on the surface of the nanoparticles, and Cr(VI), the predominant species in the contaminated solution, is significantly reduced to Cr(III). Through X-ray photoelectron spectroscopy, it is shown that a greater reduction effect is achieved when working in induction conditions than at room temperature. This is the first time that this synergistic effect using magnetic induction heating has been demonstrated for heavy metal decontamination of wastewater.

Soluble Graphene Nanosheets for the Sunlight-Induced Photodegradation of the Mixture of Dyes and its Environmental Assessment

Currently, the air and water pollutions are presenting the most serious global concerns. Despite the well known tremendous efforts, it could be a promising sustainability if the black carbon (BC) soot can be utilized for the practical and sustainable applications. For this, the almost complete aqueous phase photodegradation of the three well-known organic pollutant dyes as crystal violet (CV); rhodamine B (RhB); methylene blue (MB) and their mixture (CV + RhB + MB), by using water-soluble graphene nanosheets (wsGNS) isolated from the BC soot under the influence of natural sunlight is described. The plausible mechanism behind the photocatalytic degradation of dyes and their mixture has been critically analyzed via the trapping of active species and structural analysis of photodegraded products. The impact of diverse interfering ions like Ca2+, Fe3+, SO42-, HPO42-, NO3-, and Cl- on the photodegradation efficiency of wsGNS was also investigated. Importantly, the environmental assessment of the whole process has been evaluated towards the growth of wheat plants using the treated wastewater. The initial studies for the fifteen days confirmed that growth of wheat plants was almost the same in the photodegraded wastewater as being noticed in the control sample, while in case of dyes contaminated water it showed the retarded growth. Using the natural sunlight, the overall sustainability of the presented work holds the potential for the utilization of pollutant soot in real-practical applications related to the wastewater remediation and further the practical uses of treated water.

Environmental performance of graphene-based 3D macrostructures

Three-dimensional macrostructures (3DMs) of graphene and graphene oxide are being developed for fast and efficient removal of contaminants from water and air. The large specific surface area, versatile surface chemistry and exceptional mechanical properties of graphene-based nanosheets enable the formation of robust and high-performance 3DMs such as sponges, membranes, beads and fibres. However, little is known about the relationship between the materials properties of graphene-based 3DMs and their environmental performance. In this Review, we summarize the self-assembly and environmental applications of graphene-based 3DMs in removing contaminants from water and air. We also develop the critical link between the materials properties of 3DMs and their environmental performance, and identify the key parameters that influence their capacities for contaminant removal.

Preparation of gemini surfactant/graphene oxide composites and their superior performance for Congo red adsorption

Gemini surfactant/GO composites (10-2-10/GO, 12-2-12/GO, and 14-2-14/GO) have been successfully prepared using three gemini surfactants with different tail chain lengths. The morphology and physicochemical properties of the as-synthesized composites were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform-infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The gemini surfactant/GO composites were applied to the adsorption of Congo red dye, and from the experimental data, optimum adsorption conditions, adsorption kinetics, and isotherms were obtained. The removal process was favorable at acidic pH and reached equilibrium in ∼60 min. The results showed that the pseudo-second-order model and the Langmuir adsorption isotherm were a good fit for the adsorption of Congo red onto gemini surfactant/GO composites. Compared with other adsorbents reported in the literature, these composites showed superior Congo red adsorption capabilities, with absorption capacities as high as 2116, 2193, and 2325 mg g⁻¹ for 10-2-10/GO, 12-2-12/GO, and 14-2-14/GO, respectively. Moreover, the adsorption capacities were more than 1000 mg g⁻¹ even for the fifth cycle. The results of the present study substantiate that the gemini surfactant/GO composites are promising adsorbents for the removal of organic dyes in wastewater treatment.

Gemini surfactant/GO composites were prepared for the removal of Congo red dye, and show excellent adsorption capacities and reusabilities.

Rational design of materials interface at nanoscale towards intelligent oil-water separation

Oil-water separation is critical for the water treatment of oily wastewater or oil-spill accidents. The oil contamination in water not only induces severe water pollution but also threatens human beings' health and all living species in the ecological system. To address this challenge, different nanoscale fabrication methods have been applied for endowing biomimetic porous materials, which provide a promising solution for oily-water remediation. In this review, we present the state-of-the-art developments in the rational design of materials interface with special wettability for the intelligent separation of immiscible/emulsified oil-water mixtures. A mechanistic understanding of oil-water separation is firstly described, followed by a summary of separation solutions for traditional oil-water mixtures and special oil-water emulsions enabled by self-amplified wettability due to nanostructures. Guided by the basic theory, the rational design of interfaces of various porous materials at nanoscale with special wettability towards superhydrophobicity-superoleophilicity, superhydrophilicity-superoleophobicity, and superhydrophilicity-underwater superoleophobicity is discussed in detail. Although the above nanoscale fabrication strategies are able to address most of the current challenges, intelligent superwetting materials developed to meet special oil-water separation demands and to further promote the separation efficiency are also reviewed for various special application demands. Finally, challenges and future perspectives in the development of more efficient oil-water separation materials and devices by nanoscale control are provided. It is expected that the biomimetic porous materials with nanoscale interface engineering will overcome the current challenges of oil-water emulsion separation, realizing their practical applications in the near future with continuous efforts in this field.

Adsorption studies of cadmium onto magnetic Fe3O4@FePO4 and its preconcentration with detection by electrothermal atomic absorption spectrometry

Superparamagnetic Fe₃O₄@FePO₄ nanoparticles with core shell structure were prepared by coating iron phosphate on the surface of Fe₃O₄ nanoparticles by liquid phase deposition method. The prepared materials were characterized by vibrating sample magnetometer, scanning electron microscopy, X-ray diffractometer, Fourier transform infrared spectrometer, nano Zetasizer, X-ray photoelectron spectroscopy and Raman spectrometer. These characterization methods were also used to describe the adsorption mechanism. The obtained composite material was used for the adsorption of a heavy metal element, cadmium. Its unique magnetic properties are favorable for rapid separation and preconcentration of trace cadmium from aqueous solutions. About 100% sorption was achieved at pH 7 for 1mL, 10μgL^-1 of cadmium. Batch adsorption experiments show that the adsorption fits Langmuir model, and a maximum adsorption capacity 13.51mgg^-1 is derived for Cd(II). The retained Cd(II) could be readily recovered by 200μL of HNO₃ (0.01molL^-1). The cadmium in the eluate is quantified with detection by electrothermal atomic absorption spectrometry (ETAAS). A sample volume of 2000μL creates an enrichment factor of 10.3, along with a detection limit of 0.021µgL^-1 (3σ, n=7) and a RSD of 1.3% (0.1µgL^-1, n=7) within a linear calibration range of 0.05-0.5µgL^-1. The practical applicability of this procedure was validated by analyzing cadmium contents in a certified reference material (GBW08608) and two environmental water samples.

Three-dimensional honeycomb-like porous carbon derived from corncob for the removal of heavy metals from water by capacitive deionization

In this study, porous carbon (3DHPC) with a 3D honeycomb-like structure was synthesized from waste biomass corncob via hydrothermal carbonization coupled with KOH activation and investigated as a capacitive deionization (CDI) electrode material. The obtained 3DHPC possesses a hierarchal macroporous and mesoporous structure, and a large accessible specific surface area (952 m² g⁻¹). Electrochemical tests showed that the 3DHPC electrode exhibited a specific capacitance of 452 F g⁻¹ and good electric conductivity. Moreover, the feasibility of electrosorptive removal of chromium(vi) from an aqueous solution using the 3DHPC electrode was demonstrated. When 1.0 V was applied to a solution containing 30 mg L⁻¹ chromium(vi), the 3DHPC electrode exhibited a higher removal efficiency of 91.58% compared with that in the open circuit condition. This enhanced adsorption results from the improved affinity between chromium(vi) and the electrode under electrochemical assistance involving a non-faradic process. Consequently, the 3DHPC electrode with typical double-layer capacitor behavior is demonstrated to be a favorable electrode material for capacitive deionization.

A porous carbon electrode with a 3D honeycomb-like structure demonstrates a high removal efficiency for the removal of chromium(vi) from water.

A Janus oil barrel with tapered microhole arrays for spontaneous high-flux spilled oil absorption and storage

Porous oil/water separation materials show excellent prospects in the remediation of oil spill accidents. However, several drawbacks such as low flux, limited absorption and storage capacity restrict their practical applications. Hence, a novel Janus oil barrel (superhydrophobic outside wall and superhydrophilic inside wall) constituted by tapered microhole arrayed aluminium foil is designed, which is demonstrated to be a promising device for the remediation of oil spill accidents. Furthermore, the investigation shows that the tapered microholes (taper angle 25-30°) can significantly enhance oil/water intrusion pressures (1-3 times higher than cylindrical holes) and unidirectional transferability which can eliminate the secondary leakage when salvaging full oil barrels without an additional procedure. It is indicated that the Janus oil barrel can spontaneously absorb spilled oil with a high flux (45 000 Lm^-2 h^-1), and synchronously store the absorbed oil. In addition, the barrel can absorb oil from surfactant-free oil-in-water emulsions appearing in oil spills and industrial processes. The distinct design combining excellent controllability, high precision and flexibility of the femtosecond laser micro/nanofabrication technology provides a general strategy in oil spill remediation.

Highly Efficient and Robust Oil/Water Separation Materials Based on Wire Mesh Coated by Reduced Graphene Oxide

We develop a simple approach for the preparation of oil/water separation material based on the reduced graphene oxide. First, the graphene oxide (GO) is coated on the commercially available wire mesh. The treatment of O₂ plasma is exploited to open the pores from the back side using the wire mesh as a ready-made mask, and the GO-coated mesh is subjected to the thermal annealing at 200 °C for 2 h to form stable superhydrophobic reduced graphene oxide (RGO) coating. The as-prepared mesh has excellent stability and reusability and the separation selectivity is above 98% for a variety of mixtures of oil and water. Meanwhile, the as-prepared RGO@mesh-300 shows stable and robust superhydrophobic properties including the stability of long-term storage, the resistance to high temperatures, high humidities, and mechanical abrasion. It is expected that this method of fabricating superhydrophobic materials can find more practical applications, especially in the oil/water separation.

Electrochemical Exfoliation of Graphite in Aqueous Sodium Halide Electrolytes toward Low Oxygen Content Graphene for Energy and Environmental Applications

Graphene and graphene-based materials have shown great promise in many technological applications, but their large-scale production and processing by simple and cost-effective means still constitute significant issues in the path of their widespread implementation. Here, we investigate a straightforward method for the preparation of a ready-to-use and low oxygen content graphene material that is based on electrochemical (anodic) delamination of graphite in aqueous medium with sodium halides as the electrolyte. Contrary to previous conflicting reports on the ability of halide anions to act as efficient exfoliating electrolytes in electrochemical graphene exfoliation, we show that proper choice of both graphite electrode (e.g., graphite foil) and sodium halide concentration readily leads to the generation of large quantities of single-/few-layer graphene nanosheets possessing a degree of oxidation (O/C ratio down to ∼0.06) lower than that typical of anodically exfoliated graphenes obtained with commonly used electrolytes. The halide anions are thought to play a role in mitigating the oxidation of the graphene lattice during exfoliation, which is also discussed and rationalized. The as-exfoliated graphene materials exhibited a three-dimensional morphology that was suitable for their practical use without the need to resort to any kind of postproduction processing. When tested as dye adsorbents, they outperformed many previously reported graphene-based materials (e.g., they adsorbed ∼920 mg g^-1 for methyl orange) and were useful sorbents for oils and nonpolar organic solvents. Supercapacitor cells assembled directly from the as-exfoliated products delivered energy and power density values (up to 15.3 Wh kg^-1 and 3220 W kg^-1, respectively) competitive with those of many other graphene-based devices but with the additional advantage of extreme simplicity of preparation.

Nitrogen-Doped Graphene Nanoscroll Foam with High Diffusion Rate and Binding Affinity for Removal of Organic Pollutants

A nitrogen-doped 3D graphene foam assembled with nanoscroll structure is constructed via a facile mild-heating methodology using a polar molecule of formamide as the driving regent. The as-prepared graphene nanoscroll foam exhibits promising performance in organic pollutant removal with improved adsorption rate and high binding affinity, and is thought to be a novel adsorption material.

Carbon-Based Functional Materials Derived from Waste for Water Remediation and Energy Storage

Carbon-based functional materials hold the key for solving global challenges in the areas of water scarcity and the energy crisis. Although carbon nanotubes (CNTs) and graphene have shown promising results in various fields of application, their high preparation cost and low production yield still dramatically hinder their wide practical applications. Therefore, there is an urgent call for preparing carbon-based functional materials from low-cost, abundant, and sustainable sources. Recent innovative strategies have been developed to convert various waste materials into valuable carbon-based functional materials. These waste-derived carbon-based functional materials have shown great potential in many applications, especially as sorbents for water remediation and electrodes for energy storage. Here, the research progress in the preparation of waste-derived carbon-based functional materials is summarized, along with their applications in water remediation and energy storage; challenges and future research directions in this emerging research field are also discussed.