Radially Aligned Electrospun Fibers with Continuous Gradient of SDF1α for the Guidance of Neural Stem Cells

Electrospun radially oriented berberine-PHBV nanofiber dressing patches for accelerating diabetic wound healing

A dressing patch made of radially oriented poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibers was successfully manufactured with a modified electrospinning strategy. The as-electrospun PHBV radially oriented nanofiber dressing patch exhibited uniform and bead-free nanofibrous morphology and innovative radially oriented arrangement, which was demonstrated to possess obviously improved mechanical property, increased surface hydrophilicity and enhanced biological properties compared to the PHBV nanofiber dressing patch control with traditionally randomly oriented pattern. Interestingly, it was found that the radially oriented pattern could induce the cell migration from the periphery to the center along the radially oriented nanofibers in a rapid manner. To further improve the biofunction of PHBV radially oriented nanofiber dressing patch, berberine (Beri, an isoquinoline alkaloid) with two different concentrations were encapsulated into PHBV nanofibers during electrospinning, which were found to present a sustained drug release behavior for nearly one month. Importantly, the addition of Beri could impart the dressing patch with excellent anti-inflammatory property by significantly inhibiting the secretion of pro-inflammatory factors of M1 macrophages, and also showed an additive influence on promoting the proliferation of human dermal fibroblasts (HDFs), as well as inhibiting the growth of E. coli, S. aureus and C. albicans, compared with the Beri-free dressing patch. In the animal studies, the electrospun PHBV radially oriented nanofiber dressing patch loading with high Beri content was found to obviously accelerate the healing process of diabetic mouse full-thickness skin wound with shortened healing time (100% wound closure rate after 18 days' treatment) and improved healing quality (improved collagen deposition, enhanced re-epithelialization and neovascularization and increased hair follicles). In all, this study reported an innovative therapeutic strategy integrating the excellent physical cues of electrospun PHBV radially oriented nanofiber dressing patch with the multiple biological cues of Beri for the effective treatment of hard-to-heal diabetic wounds.

Advances in Material-Assisted Electromagnetic Neural Stimulation

Bioelectricity plays a crucial role in organisms, being closely connected to neural activity and physiological processes. Disruptions in the nervous system can lead to chaotic ionic currents at the injured site, causing disturbances in the local cellular microenvironment, impairing biological pathways, and resulting in a loss of neural functions. Electromagnetic stimulation has the ability to generate internal currents, which can be utilized to counter tissue damage and aid in the restoration of movement in paralyzed limbs. By incorporating implanted materials, electromagnetic stimulation can be targeted more accurately, thereby significantly improving the effectiveness and safety of such interventions. Currently, there have been significant advancements in the development of numerous promising electromagnetic stimulation strategies with diverse materials. This review provides a comprehensive summary of the fundamental theories, neural stimulation modulating materials, material application strategies, and pre-clinical therapeutic effects associated with electromagnetic stimulation for neural repair. It offers a thorough analysis of current techniques that employ materials to enhance electromagnetic stimulation, as well as potential therapeutic strategies for future applications.

Quantitative Biofabrication Platform for Collagen-Based Peripheral Nerve Grafts with Structural and Chemical Guidance

Owing to its crucial role in the human body, collagen has immense potential as a material for the biofabrication of tissues and organs. However, highly refined fabrication using collagen remains difficult, primarily because of its notably soft properties. A quantitative biofabrication platform to construct collagen-based peripheral nerve grafts, incorporating bionic structural and chemical guidance cues, is introduced. A viscoelastic model for collagen, which facilitates simulating material relaxation and fabricating collagen-based neural grafts, achieving a maximum channel density similar to that of the native nerve structure of longitudinal microchannel arrays, is established. For axonal regeneration over considerable distances, a gradient printing control model and quantitative method are developed to realize the high-precision gradient distribution of nerve growth factor required to obtain nerve grafts through one-step bioprinting. Experiments verify that the bioprinted graft effectively guides linear axonal growth in vitro and in vivo. This study should advance biofabrication methods for a variety of human tissue-engineering applications requiring tailored cues.

Functional Hydrogel Co-Remolding Migration and Differentiation Microenvironment for Severe Spinal Cord Injury Repair

Spinal cord injury (SCI) activates nestin+ neural stem cells (NSCs), which can be regarded as potential seed cells for neuronal regeneration. However, the lesion microenvironment seriously hinders the migration of the nestin+ cells to the lesion epicenter and their differentiation into neurons to rebuild neural circuits. In this study, a photosensitive hydrogel scaffold is prepared as drug delivery carrier. Genetically engineered SDF1α and NT3 are designed and the scaffold is binary modified to reshape the lesion microenvironment. The binary modified scaffold can effectively induce the migration and neuronal differentiation of nestin+ NSCs in vitro. When implanted into a rat complete SCI model, many of the SCI-activated nestin+ cells migrate into the lesion site and give rise to neurons in short-term. Meanwhile, long-term repair results also show that implantation of the binary modified scaffold can effectively promote the maturation, functionalization and synaptic network reconstruction of neurons in the lesion site. In addition, animals treated with binary scaffold also showed better improvement in motor functions. The therapeutic strategy based on remolding the migration and neuronal differentiation lesion microenvironment provides a new insight into SCI repair by targeting activated nestin+ cells, which exhibits excellent clinical transformation prospects.

Individually Tailored Modular "Egg" Hydrogels Capable of Spatiotemporally Controlled Drug Release for Spinal Cord Injury Repair

Controllable drug delivery systems (DDS) can overcome the disadvantages of conventional drug administration processes, such as high dosages or repeated administration. Herein, a smart DDS collagen hydrogel is deployed for spinal cord injury (SCI) repair based on modular designing of "egg" nanoparticles (NPs) that ingeniously accomplish controlled drug release via inducing a signaling cascade in response to external and internal stimuli. The "egg" NPs consist of a three-layered structure: tannic acid/Fe3+ /tetradecanol "eggshell," zeolitic imidazolate framework-8 (ZIF-8) "egg white," and paclitaxel "yolk." Then NPs served as a crosslinking epicenter, blending with collagen solutions to generate functional hydrogels. Remarkably, the "eggshell" efficiently converts near-infrared (NIR) irradiation into heat. Subsequently, tetradecanol can be triggered to disintegrate via heat, exposing the structure of ZIF-8. The Zn-imidazolium ion coordination bond of the "egg white" is susceptible to cleaving at the acidic SCI site, decomposing the skeleton to release paclitaxel on demand. As expected, the paclitaxel release rate upon NIR irradiation increased up to threefold on the seventh day, which matches endogenous neural stem/progenitor cell migration process. Taken together, the collagen hydrogels facilitate the neurogenesis and motor function recovery, demonstrating a revolutionary strategy for spatiotemporally controlled drug release and providing guidelines for the design of DDS.

Promoting neurite outgrowth and neural stem cell migration using aligned nanofibers decorated with protrusions and galectin-1 coating

Biomaterials integrated with both topological cues and biological modifications are urgently needed in regenerative medicine. Here, aligned nanofibrous scaffolds decorated with nanoscale SiO2 protrusions and galectin-1 coating are reported. Prospects in neurite outgrowth and neural stem cell migration are discussed for suitable use in neural tissue engineering.

Radially Electrospun Fibrous Membrane Incorporated with Copper Peroxide Nanodots Capable of Self-Catalyzed Chemodynamic Therapy for Angiogenesis and Healing Acceleration of Diabetic Wounds

Vascular dysfunction severely hinders the healing process of diabetic wounds. Therefore, a radially structured fibrous membrane was fabricated through electrospinning by using a polycaprolactone (PCL) and polyvinylpyrrolidone (PVP) mixed solution containing copper peroxide nanoparticles (CPs) as the chemodynamic therapy (CDT) agents, aiming to simultaneously accelerate tissue regeneration and angiogenesis. The fabricated membrane allowed for the in situ H₂O₂ generation activated by the acidic diabetic microenvironment and the subsequent Fenton-type reactions to realize 99.4% elimination against Staphylococcus aureus. Besides, the released Cu²⁺ ions significantly enhanced the expression of hypoxia-inducible factor-1α (HIF-1α) and vascular endothelial growth factor (VEGF) in human umbilical vein endothelial cells (HUVECs), and they showed enhanced in vitro angiogenesis. Interestingly, the CP-embedded membrane also guided cell spreading and orientated migration of L929 fibroblasts along the fiber distribution through the radially aligned topology. The in vivo implantation indicated that the raidally structured membrane modified by CPs not only dramatically accelerated wound healing of diabetic Sprague-Dawley (SD) rats in 14 days but also promoted angiogenesis in wound sites. The combination of the in situ CDT with the radially structured morphology of the functional membrane is highly promising in applications to promote diabetic wound healing through anti-infection and revascularization.

In-vivo programmable acoustic manipulation of genetically engineered bacteria

Acoustic tweezers can control target movement through the momentum interaction between an acoustic wave and an object. This technology has advantages over optical tweezers for in-vivo cell manipulation due to its high tissue penetrability and strong acoustic radiation force. However, normal cells are difficult to acoustically manipulate because of their small size and the similarity between their acoustic impedance and that of the medium. In this study, we use the heterologous expression of gene clusters to generate genetically engineered bacteria that can produce numerous sub-micron gas vesicles in the bacterial cytoplasm. We show that the presence of the gas vesicles significantly enhances the acoustic sensitivity of the engineering bacteria, which can be manipulated by ultrasound. We find that by employing phased-array-based acoustic tweezers, the engineering bacteria can be trapped into clusters and manipulated in vitro and in vivo via electronically steered acoustic beams, enabling the counter flow or on-demand flow of these bacteria in the vasculature of live mice. Furthermore, we demonstrate that the aggregation efficiency of engineering bacteria in a tumour is improved by utilizing this technology. This study provides a platform for the in-vivo manipulation of live cells, which will promote the progress of cell-based biomedical applications.

Collagen for neural tissue engineering: Materials, strategies, and challenges

Neural tissue engineering (NTE) has made remarkable strides in recent years and holds great promise for treating several devastating neurological disorders. Selecting optimal scaffolding material is crucial for NET design strategies that enable neural and non-neural cell differentiation and axonal growth. Collagen is extensively employed in NTE applications due to the inherent resistance of the nervous system against regeneration, functionalized with neurotrophic factors, antagonists of neural growth inhibitors, and other neural growth-promoting agents. Recent advancements in integrating collagen with manufacturing strategies, such as scaffolding, electrospinning, and 3D bioprinting, provide localized trophic support, guide cell alignment, and protect neural cells from immune activity. This review categorises and analyses collagen-based processing techniques investigated for neural-specific applications, highlighting their strengths and weaknesses in repair, regeneration, and recovery. We also evaluate the potential prospects and challenges of using collagen-based biomaterials in NTE. Overall, this review offers a comprehensive and systematic framework for the rational evaluation and applications of collagen in NTE.

Designing of gradient scaffolds and their applications in tissue regeneration

Gradient scaffolds are isotropic/anisotropic three-dimensional structures with gradual transitions in geometry, density, porosity, stiffness, etc., that mimic the biological extracellular matrix. The gradient structures in biological tissues play a major role in various functional and metabolic activities in the body. The designing of gradients in the scaffold can overcome the current challenges in the clinic compared to conventional scaffolds by exhibiting excellent penetration capacity for nutrients & cells, increased cellular adhesion, cell viability & differentiation, improved mechanical stability, and biocompatibility. In this review, the recent advancements in designing gradient scaffolds with desired biomimetic properties, and their implication in tissue regeneration applications have been briefly explained. Furthermore, the gradients in native tissues such as bone, cartilage, neuron, cardiovascular, skin and their specific utility in tissue regeneration have been discussed in detail. The insights from such advances using gradient-based scaffolds can widen the horizon for using gradient biomaterials in tissue regeneration applications.

Biomimetic three-layer hierarchical scaffolds for efficient water management and cell recruitment

Taking inspiration from the structures of roots, stems and leaves of trees in nature, a biomimetic three-layered scaffold was designed for efficient water management and cell recruitment. Using polycaprolactone (PCL) and polyacrylonitrile (PAN) as raw materials, radially oriented nanofiber films and multistage adjustable nanofiber films were prepared through electrospinning technology as the base skin-friendly layer (roots) and middle unidirectional moisture conductive material (stems), the porous polyurethane foam was integrated as the outer moisturizing layer (leaves). Among which, radially oriented nanofiber films could promote the directional migration of fibroblasts and induce cell morphological changes. For the spatially hierarchically nanofiber films, the unidirectional transport of liquid was effectively realized. While the porous polyurethane foam membrane could absorb 9 times its weight in biofluid and retain moisture for up to 10 h. As a result, the biomimetic three-layered scaffolds with different structures can promote wound epithelization and drain biofluid while avoiding wound inflammation caused by excessive biofluid, which is expected to be applied in the field of skin wounds.

Collagen Alignment via Electro-Compaction for Biofabrication Applications: A Review

As the most prevalent structural protein in the extracellular matrix, collagen has been extensively investigated for biofabrication-based applications. However, its utilisation has been impeded due to a lack of sufficient mechanical toughness and the inability of the scaffold to mimic complex natural tissues. The anisotropic alignment of collagen fibres has been proven to be an effective method to enhance its overall mechanical properties and produce biomimetic scaffolds. This review introduces the complicated scenario of collagen structure, fibril arrangement, type, function, and in addition, distribution within the body for the enhancement of collagen-based scaffolds. We describe and compare existing approaches for the alignment of collagen with a sharper focus on electro-compaction. Additionally, various effective processes to further enhance electro-compacted collagen, such as crosslinking, the addition of filler materials, and post-alignment fabrication techniques, are discussed. Finally, current challenges and future directions for the electro-compaction of collagen are presented, providing guidance for the further development of collagenous scaffolds for bioengineering and nanotechnology.

The roles and applications of neural stem cells in spinal cord injury repair

Spinal cord injury (SCI), which has no current cure, places a severe burden on patients. Stem cell-based therapies are considered promising in attempts to repair injured spinal cords; such options include neural stem cells (NSCs). NSCs are multipotent stem cells that differentiate into neuronal and neuroglial lineages. This feature makes NSCs suitable candidates for regenerating injured spinal cords. Many studies have revealed the therapeutic potential of NSCs. In this review, we discuss from an integrated view how NSCs can help SCI repair. We will discuss the sources and therapeutic potential of NSCs, as well as representative pre-clinical studies and clinical trials of NSC-based therapies for SCI repair.

Recent Advances in Cell and Functional Biomaterial Treatment for Spinal Cord Injury

Spinal cord injury (SCI) is a devastating central nervous system disease caused by accidental events, resulting in loss of sensory and motor function. Considering the multiple effects of primary and secondary injuries after spinal cord injury, including oxidative stress, tissue apoptosis, inflammatory response, and neuronal autophagy, it is crucial to understand the underlying pathophysiological mechanisms, local microenvironment changes, and neural tissue functional recovery for preparing novel treatment strategies. Treatment based on cell transplantation has become the forefront of spinal cord injury therapy. The transplanted cells provide physical and nutritional support for the damaged tissue. At the same time, the implantation of biomaterials with specific biological functions at the site of the SCI has also been proved to improve the local inhibitory microenvironment and promote axonal regeneration, etc. The combined transplantation of cells and functional biomaterials for SCI treatment can result in greater neuroprotective and regenerative effects by regulating cell differentiation, enhancing cell survival, and providing physical and directional support for axon regeneration and neural circuit remodeling. This article reviews the pathophysiology of the spinal cord, changes in the microenvironment after injury, and the mechanisms and strategies for spinal cord regeneration and repair. The article will focus on summarizing and discussing the latest intervention models based on cell and functional biomaterial transplantation and the latest progress in combinational therapies in SCI repair. Finally, we propose the future prospects and challenges of current treatment regimens for SCI repair, to provide references for scientists and clinicians to seek better SCI repair strategies in the future.

Nerve implants with bioactive interfaces enhance neurite outgrowth and nerve regeneration in vivo

Nerve implants functionalized with growth factors and stem cells are critical to promote neurite outgrowth, regulate neurodifferentiation, and facilitate nerve regeneration. In this study, human umbilical cord mesenchymal stem cells (hUCMSCs) and 3,4-hydroxyphenalyalanine (DOPA)-containing insulin-like growth factor 1 (DOPA-IGF-1) were simultaneously applied to enhance the bioactivity of poly(lactide-co-glycolide) (PLGA) substrates which will be potentially utilized as nerve implants. In vitro and in vivo evaluations indicated that hUCMSCs and DOPA-IGF-1 could synergistically regulate neurite outgrowth of PC12 cells, improve intravital recovery of motor functions, and promote conduction of nerve electrical signals in vivo. The enhanced functional and structural nerve regeneration of injured spinal cord might be mainly attributable to the synergistically enhanced biofunctionality of hUCMSCs and DOPA-IGF-1/PLGA on the bioactive interfaces. Findings from this study demonstrate the potential of hUCMSC-seeded, DOPA-IGF-1-modified PLGA implants as promising candidates for promoting axonal regeneration and motor functional recovery in spinal cord injury treatment.

An overview on electrospinning and its advancement toward hard and soft tissue engineering applications

One of the emerging technologies of the recent times harboring nanotechnology to fabricate nanofibers for various biomedical and environmental applications are electrospinning (nanofiber technology). Their relative ease in use, simplicity, functionality and diversity has surpassed the pitfalls encountered with the conventional method of generating fibers. This review aims to provide an overview of electrospinning, principle, methods, feed materials, and applications toward tissue engineering. To begin with, evolution of electrospinning and its typical apparatus have been briefed. Simultaneously, discussion on the production of nanofibers with diversified feed materials such as polymers, small molecules, colloids, and nanoparticles and its transformation into a powerful technology has been dealt with. Further, highlights on the application of nanofibers in tissue engineering and the commercialized products developed using nanofiber technology have been summed up. With this rapidly emerging technology, there would be a great demand pertaining to scalability and environmental challenge toward tissue engineering applications.

Electrospun piezoelectric scaffolds for cardiac tissue engineering

The use of smart materials in tissue engineering is becoming increasingly appealing to provide additional functionalities and control over cell fate. The stages of tissue development and regeneration often require various electrical and electromechanical cues supported by the extracellular matrix, which is often neglected in most tissue engineering approaches. Particularly, in cardiac cells, electrical signals modulate cell activity and are responsible for the maintenance of the excitation-contraction coupling. Addition of electroconductive and topographical cues improves the biomimicry of cardiac tissues and plays an important role in driving cells towards the desired phenotype. Current platforms used to apply electrical stimulation to cells in vitro often require large external equipment and wires and electrodes immersed in the culture media, limiting the scalability and applicability of this process. Piezoelectric materials represent a shift in paradigm in materials and methods aimed at providing electrical stimulation to cardiac cells since they can produce and deliver electrical signals to cells and tissues by mechanoelectrical transduction. Despite the ability of piezoelectric materials to mimic the mechanoelectrical transduction of the heart, the use of these materials is limited in cardiac tissue engineering and methods to characterise piezoelectricity are often built in-house, which poses an additional difficulty when comparing results from the literature. In this work, we aim at providing an overview of the main challenges in cardiac tissue engineering and how piezoelectric materials could offer a solution to them. A revision on the existing literature in electrospun piezoelectric materials applied to cardiac tissue engineering is performed for the first time, as electrospinning plays an important role in the manufacturing of scaffolds with enhanced piezoelectricity and extracellular matrix native-like morphology. Finally, an overview of the current techniques used to evaluate piezoelectricity and their limitations is provided.

Nonwoven spidroin materials as scaffolds for ex vivo cultivation of aortic fragments and dorsal root ganglia

Recombinant spidroins (RS; the analogues of silk proteins of spider's web) have multiple properties beneficial for bioengineering, including their suitability for electrospinning and thus, for production of materials with oriented fibers. This makes RS-based matrices potentially effective in stimulating regeneration of peripheral nerves. The restoration of injured nerves also depends on prompt regrowth of blood vessels. Therefore, prospective scaffold materials for neuro-regenerative therapy should positively affect both the nerves and the blood vessels. Currently, the experimental models suitable for culturing and quantitative assessment of the vascular and neuronal cells on the same material are lacking. Here, we assessed the suitability of electrospun RS-based matrices for cultivation of the mouse aorta and dorsal root ganglia (DRG) explants. We also quantified the effects of matrix topography upon both types of tissues. The RS-based materials have effectively supported aortic explants survival and sprouting. The cumulative length of endothelial sprouts on rS1/9-coated inserts was significantly higher as compared to type I collagen coatings, suggesting stimulatory effects on angiogenesis in vitro. In contrast to matrices with random fibers, on matrices with parallel fibers the migration of both smooth muscle and endothelial cells was highly oriented. Furthermore, alignment of RS fibers effectively directs the growth of axons and the migration of Schwann cells from DRGs. Thus, the electrospun RS matrices are highly suitable to culture both, the DRGs and aortic explants and to study the effects of matrix topography on cell migration. This model has a high potential for further endeavor into interactions of nerve and vascular cells and tissues.

Accelerating Cell Migration along Radially Aligned Nanofibers through the Addition of Electrosprayed Nanoparticles in a Radial Density Gradient

Scaffolds capable of promoting cell migration from the periphery towards the center along the radial direction hold promises for tissue regeneration. Here we report a simple and general method based on masked electrospray for the fabrication of such scaffolds by depositing collagen nanoparticles on radially-aligned nanofibers in a radial density gradient. Placed between the metallic needle and the collector, an aperture with tunable opening sizes serves as the mask. By increasing the size of the opening at a fixed speed, the electrosprayed particles take a radial density gradient that decreases from the center to the periphery. When deposited on a glass slide, the radial density gradient of collagen nanoparticles promotes the migration of fibroblasts from the periphery towards the center. By replacing the glass slide with a scaffold comprised of radially-aligned nanofibers, a synergetic effect arises to further accelerate cell migration along the radial direction. The synergistic effect can be attributed to a unique combination of the topographic cue arising from the aligned nanofibers and the haptotactic cue enabled by the graded nanoparticles. This work demonstrates a method to maximize cell migration from the periphery towards the center through a combination of topographic and haptotactic cues.

Nanofiber curvature with Rho GTPase activity increases mouse embryonic fibroblast random migration velocity

Mechanotransduction arises from information encoded in the shape of materials such as curvature. It induces activation of small GTPase signaling affecting cell phenotypes including differentiation. We carried out a set of preliminary experiments to test the hypothesis that curvature (1/radius) would also affect cell motility due to signal pathway crosstalk. High molecular weight poly (methyl methacrylate) straight nanofibers were electrospun with curvature ranging from 41 to 1 μm-1 and collected on a passivated glass substrate. The fiber curvature increased mouse mesenchymal stem cell aspect ratio (P < 0.02) and decreased cell area (P < 0.01). Despite little effect on some motility patterns such as polarity and persistence, we found selected fiber curvatures can increase normalized random fibroblastic mouse embryonic cell (MEF) migration velocity close to 2.5 times compared with a flat surface (P < 0.001). A maximum in the velocity curve occurred near 2.5 μm-1 and may vary with the time since initiation of attachment to the surface (range of 0-20 h). In the middle range of fiber curvatures, the relative relationship to curvature was similar regardless of treatment with Rho-kinase inhibitor (Y27632) or cdc42 inhibitor (ML141), although it was decreased on most curvatures (P < 0.05). However, below a critical curvature threshold MEFs may not be able to distinguish shallow curvature from a flat surface, while still being affected by contact guidance. The preliminary data in this manuscript suggested the large low curvature fibers were interpreted in a manner similar to a non-curved surface. Thus, curvature is a biomaterial construct design parameter that should be considered when specific biological responses are desired. Statement of integration, innovation, and insight  Replacement of damaged or diseased tissues that cannot otherwise regenerate is transforming modern medicine. However, the extent to which we can rationally design materials to affect cellular outcomes remains low. Knowing the effect of material stiffness and diameter on stem cell differentiation, we investigated cell migration and signaling on fibrous scaffolds. By investigating diameters across orders of magnitude (50-2000 nm), we identified a velocity maximum of ~800 nm. Furthermore, the results suggest large fibers may not be interpreted by single cells as a curved surface. This work presents insight into the design of constructs for engineering tissues.

Neuroinduction and neuroprotection co-enhanced spinal cord injury repair based on IL-4@ZIF-8-loaded hyaluronan-collagen hydrogels with nano-aligned and viscoelastic cues

Spontaneous recovery after spinal cord injury (SCI) is extremely limited since the severe inflammatory responses lead to secondary damage, and the diseased extracellular matrix (ECM) fails to provide inductive cues...

Spinal Cord Repair: From Cells and Tissue Engineering to Extracellular Vesicles

Spinal cord injury (SCI) is a debilitating condition, often leading to severe motor, sensory, or autonomic nervous dysfunction. As the holy grail of regenerative medicine, promoting spinal cord tissue regeneration and functional recovery are the fundamental goals. Yet, effective regeneration of injured spinal cord tissues and promotion of functional recovery remain unmet clinical challenges, largely due to the complex pathophysiology of the condition. The transplantation of various cells, either alone or in combination with three-dimensional matrices, has been intensively investigated in preclinical SCI models and clinical trials, holding translational promise. More recently, a new paradigm shift has emerged from cell therapy towards extracellular vesicles as an exciting "cell-free" therapeutic modality. The current review recapitulates recent advances, challenges, and future perspectives of cell-based spinal cord tissue engineering and regeneration strategies.

Scar tissue removal-activated endogenous neural stem cells aid Taxol-modified collagen scaffolds in repairing chronic long-distance transected spinal cord injury

Scar tissue removal combined with biomaterial implantation is considered an effective measure to repair chronic transected spinal cord injury (SCI). However, whether more scar tissue removal surgeries could affect the treatment effects of biomaterial implantation still needs to be explored. In this study, we performed the first scar tissue removal surgery in the 3^rd month and the second in the 6^th month after completely removing 1 cm of spinal tissue in canines. We found that Taxol-modified linear ordered collagen scaffold (LOCS + Taxol) implantation could promote axonal regeneration, neurogenesis, and electrophysiological and functional recovery only in canines at the first scar tissue removal surgery, but not in canines at the second scar tissue removal surgery. Interestingly, we found that more endogenous neural stem cells (NSCs) around the injured site could be activated in canines with the first rather than the second scar tissue removal. Furthermore, we demonstrated that Taxol could promote the neuronal differentiation of NSCs in the myelin inhibition microenvironment through the p38 MAPK signaling pathway in vitro. Therefore, we speculated that endogenous NSC activation by the first scar tissue removal surgery and its further differentiation into neurons induced by Taxol may contribute to functional recovery in canines. Together, LOCS + Taxol implantation in combination with the first scar tissue removal provides a promising therapy for chronic long-distance transected SCI repair with the help of scar tissue removal activated endogenous NSCs.

Dual-Cues Laden Scaffold Facilitates Neurovascular Regeneration and Motor Functional Recovery After Complete Spinal Cord Injury

Complete transection spinal cord injury (SCI) severely disrupts the integrity of both neural circuits and the microvasculature system. Hence, fabricating a functional bio-scaffold that could coordinate axonal regeneration and vascular reconstruction in the lesion area may emerge as a new paradigm for complete SCI repair. In this study, a photosensitive hydrogel scaffold loaded with collagen-binding stromal cell-derived factor-1a and Taxol liposomes is capable of inducing migration of endothelial cells and promoting neurite outgrowth of neurons in vitro. In addition, when implanted into a rat T8 complete transection SCI model, the above dual-cues laden scaffold exhibits a synergistic effect on facilitating axon and vessel regeneration in the lesion area within 10 days after injury. Moreover, long-term therapeutic effects are also observed after dual-cues laden scaffold implantation, including revascularization, descending and propriospinal axonal regeneration, fibrotic scar reduction, electrophysiological recovery, and motor function improvement. In summary, the dual-cues laden scaffold has good clinical application potential for patients with severe SCI.

Engineering multi-tissue units for regenerative Medicine: Bone-tendon-muscle units of the rotator cuff

Our body systems are comprised of numerous multi-tissue units. For the musculoskeletal system, one of the predominant functional units is comprised of bone, tendon/ligament, and muscle tissues working in tandem to facilitate locomotion. To successfully treat musculoskeletal injuries and diseases, critical consideration and thoughtful integration of clinical, biological, and engineering aspects are necessary to achieve translational bench-to-bedside research. In particular, identifying ideal biomaterial design specifications, understanding prior and recent tissue engineering advances, and judicious application of biomaterial and fabrication technologies will be crucial for addressing current clinical challenges in engineering multi-tissue units. Using rotator cuff tears as an example, insights relevant for engineering a bone-tendon-muscle multi-tissue unit are presented. This review highlights the tissue engineering strategies for musculoskeletal repair and regeneration with implications for other bone-tendon-muscle units, their derivatives, and analogous non-musculoskeletal tissue structures.

3D bioprinted neural tissue constructs for spinal cord injury repair

Three-dimensional (3D) bioprinting has emerged as a promising approach to fabricate living neural constructs with anatomically accurate complex geometries and spatial distributions of neural stem cells (NSCs) for spinal cord injury (SCI) repair. The NSC-laden 3D bioprinting, however, still faces some big challenges, such as cumbersome printing process, poor cell viability, and minimal cell-material interaction. To address these issues, we have fabricated NSC-laden scaffolds by 3D bioprinting and explore for the first time their application for in vivo SCI repair. In our strategy, we have developed a novel biocompatible bioink consisting of functional chitosan, hyaluronic acid derivatives, and matrigel. This bioink shows fast gelation (within 20 s) and spontaneous covalent crosslinking capability, facilitating convenient one-step bioprinting of spinal cord-like constructs. Thus-fabricated scaffolds maintain high NSC viability (about 95%), and offer a benign microenvironment that facilitates cell-material interactions and neuronal differentiation for optimal formation of neural network. The in vivo experiment has further demonstrated that the bioprinted scaffolds promoted the axon regeneration and decreased glial scar deposition, leading to significant locomotor recovery of the SCI model rats, which may represent a general and versatile strategy for precise engineering of central nervous system and other neural organs/tissues for regenerative medicine application.

Collagen-Based Electrospun Materials for Tissue Engineering: A Systematic Review

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.

Binary scaffold facilitates in situ regeneration of axons and neurons for complete spinal cord injury repair

The limited regrowth of transected axons and insufficient regeneration of lost neurons in adult mammals collectively hinder complete spinal cord injury (SCI) repair. Hence, designing an ideal bio-scaffold which could coordinate the regeneration of axons and neurons in situ might be able to effectively facilitate the reconstruction of neural circuits and the recovery of nerve function after complete SCI. In this study, a sponge-like collagen scaffold with good drug release characteristics and good nerve cell compatibility was prepared and used as a drug delivery platform. When doubly modified with Taxol liposomes and collagen-binding neurotrophic factor 3, the scaffold dually alleviated myelin-derived inhibition on neurite outgrowth of neurons and neuronal differentiation of neural stem cells in vitro. Meanwhile, the binary-drug modified scaffold was also able to simultaneously promote both axonal and neuronal regeneration when implanted into a complete transected SCI model. Additionally, the regenerated axons and neurons throughout the lesion site formed extensive synaptic connections. Finally, complete SCI rats that received binary scaffold implantation exhibited optimal neuroelectrophysiological recovery and hindlimb locomotor improvement. Taken together, implantation of the binary scaffold can establish neural bridging networks for functional recovery, representing a clinically promising strategy for complete SCI repair.

Immunomodulatory Layered Double Hydroxide Nanoparticles Enable Neurogenesis by Targeting Transforming Growth Factor-β Receptor 2

Immune microenvironment amelioration and reconstruction by functional biomaterials has become a promising strategy for spinal cord injury (SCI) recovery. In this study, we evaluated the neural regeneration and immunoregulation functions of Mg/Al layered double hydroxide (Mg/Al-LDH) nanoparticles in completely transected and excised mice and revealed the immune-related mechanisms. LDH achieved significant performance in accelerating neural stem cells (NSCs) migration, neural differentiation, L-Ca²⁺ channel activation, and inducible action potential generation. In vivo, the behavioral and electrophysiological performance of SCI mice was significantly improved by LDH implantation, with BrdU⁺ endogenous NSCs and neurons clearly observed in the lesion sites. According to RNA-seq and ingenuity pathway analysis, transforming growth factor-β receptor 2 (TGFBR2) is the key gene through which LDH inhibits inflammatory responses and accelerates neural regeneration. Significant colocalization of TGFBR2 and LDH was found on the cell membranes of NSCs both in vitro and in vivo, and LDH increased the expression of TGF-β2 in NSCs and activated the proliferation of precursor neural cells. LDH decreased the expression of M1 markers and increased the expression of M2 markers in both microglia and bone marrow-derived macrophages, and these effects were reversed by a TGFBR2 inhibitor. In addition, as a carrier, LDH loaded with NT3 exhibited better recovery effects with regard to the basso mouse scale score, motor evoked potential performance, and regenerated neural cell numbers than LDH itself. Thus, we have developed Mg/Al-LDH that can be used to construct a suitable immune microenvironment for SCI recovery and have revealed the targeted receptor.

3D Printed Hydrogels with Aligned Microchannels to Guide Neural Stem Cell Migration

Following traumatic or ischemic brain injury, rapid cell death and extracellular matrix degradation lead to the formation of a cavity at the brain lesion site, which is responsible for prolonged neurological deficits and permanent disability. Transplantation of neural stem/progenitor cells (NSCs) represents a promising strategy for reconstructing the lesion cavity and promoting tissue regeneration. In particular, the promotion of neuronal migration, organization, and integration of transplanted NSCs is critical to the success of stem cell-based therapy. This is particularly important for the cerebral cortex, the most common area involved in brain injuries, because the highly organized structure of the cerebral cortex is essential to its function. Biomaterials-based strategies show some promise for conditioning the lesion site microenvironment to support transplanted stem cells, but the progress in demonstrating organized cell engraftment and integration into the brain is very limited. An effective approach to sufficiently address these challenges has not yet been developed. Here, we have implemented a digital light-processing-based 3D printer and printed hydrogel scaffolds with a designed shape, uniaxially aligned microchannels, and tunable mechanical properties. We demonstrated the capacity to achieve high shape precision to the lesion site with brain tissue-matching mechanical properties. We also established spatial control of bioactive molecule distribution within 3D printed hydrogel scaffolds. These printed hydrogel scaffolds have shown high neuro-compatibility with aligned neuronal outgrowth along with the microchannels. This study will provide a biomaterial-based approach that can serve as a protective and guidance vehicle for transplanted NSC organization and integration for brain tissue regeneration after injuries.

Mechanical Properties of Electrospun, Blended Fibrinogen: PCL Nanofibers

Electrospun nanofibers manufactured from biocompatible materials are used in numerous bioengineering applications, such as tissue engineering, creating organoids or dressings, and drug delivery. In many of these applications, the morphological and mechanical properties of the single fiber affect their function. We used a combined atomic force microscope (AFM)/optical microscope technique to determine the mechanical properties of nanofibers that were electrospun from a 50:50 fibrinogen:PCL (poly-ε-caprolactone) blend. Both of these materials are widely available and biocompatible. Fibers were spun onto a striated substrate with 6 μm wide grooves, anchored with epoxy on the ridges and pulled with the AFM probe. The fibers showed significant strain softening, as the modulus decreased from an initial value of 1700 MPa (5–10% strain) to 110 MPa (>40% strain). Despite this extreme strain softening, these fibers were very extensible, with a breaking strain of 100%. The fibers exhibited high energy loss (up to 70%) and strains larger than 5% permanently deformed the fibers. These fibers displayed the stress–strain curves of a ductile material. We provide a comparison of the mechanical properties of these blended fibers with other electrospun and natural nanofibers. This work expands a growing library of mechanically characterized, electrospun materials for biomedical applications.

Spatiotemporally Controlling the Release of Biological Effectors Enhances Their Effects on Cell Migration and Neurite Outgrowth

It is a major challenge to coordinate topographic cues from scaffolds with the on-demand, sustained release of biological effectors to maximize their performance in tissue regeneration. Here, a system involving masked, photo-triggered release of biological effectors from a temperature-sensitive scaffold for augmented cell migration and neurite outgrowth is reported. The scaffold contains microparticles of a phase-change material (PCM) sandwiched between two layers of electrospun fibers. The biological effectors are co-loaded with a photothermal dye in the PCM microparticles. Under irradiation with a near-infrared laser, the PCM will be melted to swiftly release the biological effectors. By imposing a photomask between the scaffold and the laser, only those microparticles in the irradiated region are melted, enabling a spatial control over the release. By adjusting the photomask, different regions of the scaffold can be sequentially irradiated at designated times, realizing on-demand and sustained release of the biological effectors with spatiotemporal controls. In one demonstration, this method is used to accelerate the directional migration of NIH-3T3 fibroblasts along the uniaxial or radial direction of fiber alignment by controlling the release of epidermal growth factor. In another demonstration, the release of nerve growth factor is managed to significantly promote neurite outgrowth from PC12 cells.

Electrospinning and emerging healthcare and medicine possibilities

Electrospinning forms fibers from either an electrically charged polymer solution or polymer melt. Over the past decades, it has become a simple and versatile method for nanofiber production. Hence, it has been explored in many different applications. Commonly used electrospinning assembles fibers from polymer solutions in various solvents, known as solution electrospinning, while melt and near-field electrospinning techniques enhance the versatility of electrospinning. Adaption of additive manufacturing strategy to electrospinning permits precise fiber deposition and predefining pattern construction. This manuscript critically presents the potential of electrospun nanofibers in healthcare applications. Research community drew impetus from the similarity of electrospun nanofibers to the morphology and mechanical properties of fibrous extracellular matrices (ECM) of natural human tissues. Electrospun nanofibrous scaffolds act as ECM analogs for specific tissue cells, stem cells, and tumor cells to realize tissue regeneration, stem cell differentiation, and in vitro tumor model construction. The large surface-to-volume ratio of electrospun nanofibers offers a considerable number of bioactive agents binding sites, which makes it a promising candidate for a number of biomedical applications. The applications of electrospinning in regenerative medicine, tissue engineering, controlled drug delivery, biosensors, and cancer diagnosis are elaborated. Electrospun nanofiber incorporations in medical device coating, in vitro 3D cancer model, and filtration membrane are also discussed.

Combining Electrospinning and Electrospraying to Prepare a Biomimetic Neural Scaffold with Synergistic Cues of Topography and Electrotransduction

The nerve tissue consists of aligned fibrous nerve bundles, in which neurons communicate and transmit information through electrical signals. Hence, biocompatibility, oriented fibrous structure, and electrical conductivity are key factors for the biomimetic design of nerve scaffolds. Herein, we built a technical platform to combine electrospinning and electrospraying for preparing a biomimetic scaffold with conductivity and aligned fibrous structure. The highly aligned polycaprolactone (PCL) microfibrous scaffolds with co-sprayed collagen and conductive polypyrrole nanoparticles (PPy NPs) showed good bioactivity, supplying a platform for exploring the effects of topographical guidance, fiber conductivity, and its mediated external electrical signals on neurogenesis. The results revealed that collagen-coated highly aligned PCL microfibrous scaffold induced PC12 cells oriented and elongated along the direction of fibers. In addition, the improved conductivity of PPy-coated aligned fibers and its mediated external electrical stimulation collectively contributed to the functional expression, including elongation, gene expression, and protein expression, of PC12 cells. We further demonstrated the potential mechanism where the fiber conductivity and its mediated external electrical signals resulted in the upregulation of voltage-gated calcium channel, leading to the influx of Ca²⁺, thereby activating intracellular signaling cascades, ultimately enhancing neurogenesis. This approach provides a strategy to design aligned fibrillary scaffolds with bioactive adhesion domains and electroconductivity for neural regeneration.

Maneuvering the Migration and Differentiation of Stem Cells with Electrospun Nanofibers

Electrospun nanofibers have been extensively explored as a class of scaffolding materials for tissue regeneration, because of their unique capability to mimic some features and functions of the extracellular matrix, including the fibrous morphology and mechanical properties, and to a certain extent the chemical/biological cues. This work reviews recent progress in applying electrospun nanofibers to direct the migration of stem cells and control their differentiation into specific phenotypes. First, the physicochemical properties that make electrospun nanofibers well-suited as a supporting material to expand stem cells by controlling their migration and differentiation are introduced. Then various systems are analyzed in conjunction with mesenchymal, neuronal, and embryonic stem cells, as well as induced pluripotent stem cells. Finally, some perspectives on the challenges and future opportunities in combining electrospun nanofibers with stem cells are offered to address clinical issues.

Postfabrication Tethering of Molecular Gradients on Aligned Nanofibers of Functional Poly(ε-caprolactone)s

Substrates with combinations of topographical and biochemical cues are highly useful for a number of fundamental biological investigations. Tethered molecular concentration gradients in particular are highly desired for a number of biomedical applications including cell migration. Herein, we report a versatile method for the fabrication of aligned nanofiber substrates with a tunable concentration gradient along the fiber direction. 4-Dibenzocyclooctynol (DIBO) was used as an initiator for the ring-opening copolymerization of ε-caprolactone (εCL) and allyl-functionalized ε-caprolactone (AεPCL), which yielded a well-defined polymer with orthogonal functional handles. These materials were fabricated into aligned nanofiber substrates via touch-spinning. Fibers were modified post-spinning with a concentration gradient of fluorescently labeled dye via a light activated thiol-ene reaction through a photomask. As a demonstration, the cell adhesive peptide RGD was chemically tethered to the fiber surface at a second functionalization site via strain-promoted azide-alkyne cycloaddition (SPAAC). This novel approach affords fabrication of dual functional nanofiber substrates.

Progress in electrospun composite nanofibers: composition, performance and applications for tissue engineering

The discovery of novel methods to fabricate optimal scaffolds that mimic both mechanical and functional properties of the extracellular matrix (ECM) has always been the "holy grail" in tissue engineering. In recent years, electrospinning has emerged as an attractive material fabrication method and has been widely applied in tissue engineering due to its capability of producing non-woven and nanoscale fibers. However, from the perspective of biomimicry, it is difficult for single-component electrospun fiber membranes to achieve the biomimetic purposes of the multi-component extracellular matrix. Based on electrospinning, various functional components can be efficiently and expediently introduced into the membranes, and through the complementation and correlation of the properties of each component, composite materials with comprehensive and superior properties are obtained while maintaining the primitive merits of each component. In this review, we will provide an overview of the attempts made to fabricate electrospinning-based composite tissue engineering materials in the past few decades, which have been divided into organic additives, inorganic additives and organic-inorganic additives.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.

Three-Dimensional Objects Consisting of Hierarchically Assembled Nanofibers with Controlled Alignments for Regenerative Medicine

Assembling electrospun nanofibers with controlled alignment into three-dimensional (3D), complex, and predesigned shapes has proven to be a difficult task for regenerative medicine. Herein, we report a novel approach inspired by solids of revolution that transforms two-dimensional (2D) nanofiber mats of a controlled thickness into once-inaccessible 3D objects with predesigned shapes. The 3D objects are highly porous, consisting of layers of aligned nanofibers separated by gaps ranging from several micrometers to several millimeters. Upon compression, the objects are able to recover their original shapes. The porous objects can serve as scaffolds, guiding the organization of cells and producing highly ordered 3D tissue constructs. Additionally, subcutaneous implantation in rats demonstrates that the 3D objects enable rapid cell penetration, new blood vessel formation, and collagen matrix deposition. This new class of 3D hierarchical nanofiber architectures offers promising advancements in both in vitro engineering of complex 3D tissue constructs/models or organs and in vivo tissue repair and regeneration.

Aligned Scaffolds with Biomolecular Gradients for Regenerative Medicine

Aligned topography and biomolecular gradients exist in various native tissues and play pivotal roles in a set of biological processes. Scaffolds that recapitulate the complex structure and microenvironment show great potential in promoting tissue regeneration and repair. We begin with a discussion on the fabrication of aligned scaffolds, followed by how biomolecular gradients can be immobilized on aligned scaffolds. In particular, we emphasize how electrospinning, freeze drying, and 3D printing technology can accomplish aligned topography and biomolecular gradients flexibly and robustly. We then highlight several applications of aligned scaffolds and biomolecular gradients in regenerative medicine including nerve, tendon/ligament, and tendon/ligament-to-bone insertion regeneration. Finally, we finish with conclusions and future perspectives on the use of aligned scaffolds with biomolecular gradients in regenerative medicine.

Scaffold-facilitated locomotor improvement post complete spinal cord injury: Motor axon regeneration versus endogenous neuronal relay formation

Complete transected spinal cord injury (SCI) severely influences the quality of life and mortality rates of animals and patients. In the past decade, many simple and combinatorial therapeutic treatments have been tested in improving locomotor function in animals with this extraordinarily challenging SCI. The potential mechanism for promotion of locomotor function relies either on direct motor axon regeneration through the lesion gap or indirect neuronal relay bridging to functionally reconnect transected spinal stumps. In this review, we first compare the advantages and problems of complete transection SCI animal models with other prevailing SCI models used in motor axon regeneration research. Next, we enumerate some of the popular bio-scaffolds utilized in complete SCI repair in the last decade. Then, the current state of motor axon regeneration as well as its role on locomotor improvement of animals after complete SCI is discussed. Last, the current approach of directing endogenous neuronal relays formation to achieve motor function recovery by well-designed functional bio-scaffolds implantation in complete transected SCI animals is reviewed. Although facilitating neuronal relays formation by bio-scaffolds implantation appears to be more practical and feasible than directing motor axon regeneration in promoting locomotor outcome in animals after complete SCI, there are still challenges in neuronal relays formation, maintaining and debugging for spinal cord regenerative repair.

Perspective: Aligned arrays of electrospun nanofibers for directing cell migration

Cell migration plays an important role in a wide variety of biological processes, including embryogenesis, wound healing, inflammation, cancer metastasis, and tissue repair. Electrospun nanofibers have been extensively explored as scaffolds to manipulate cell migration owing to their unique characteristics in mimicking the hierarchical architecture of extracellular matrix. In particular, aligned arrays of electrospun nanofibers are capable of guiding and promoting the directional migration of cells. The physical parameters and properties of the aligned nanofibers, including their size, modulus, and surface chemistry, can all affect the migratory behaviors of cells, while the controlled release of growth factors and drugs from the nanofibers can also be utilized to influence cell migration. By manipulating cell migration, electrospun nanofibers have been applied to promote tissue repair and help eradicate tumors in vivo. In this perspective, we highlight recent developments in collecting electrospun nanofibers as aligned arrays and then illustrate how the aligned nanofibers can be utilized to manipulate cell migration.

Regulation of Inflammatory Cytokines for Spinal Cord Injury Repair Through Local Delivery of Therapeutic Agents

The balance of inflammation is critical to the repair of spinal cord injury (SCI), which is one of the most devastating traumas in human beings. Inflammatory cytokines, the direct mediators of local inflammation, have differential influences on the repair of the injured spinal cord. Some inflammatory cytokines are demonstrated beneficial to spinal cord repair in SCI models, while some detrimental. Various animal researches have revealed that local delivery of therapeutic agents efficiently regulates inflammatory cytokines and promotes repair from SCI. Quite a few clinical studies have also shown the promotion of repair from SCI through regulation of inflammatory cytokines. However, local delivery of a single agent affects only a part of the inflammatory cytokines that need to be regulated. Meanwhile, different individuals have differential profiles of inflammatory cytokines. Therefore, future studies may aim to develop personalized strategies of locally delivered therapeutic agent cocktails for effective and precise regulation of inflammation, and substantial functional recovery from SCI.

Electrospinning: An enabling nanotechnology platform for drug delivery and regenerative medicine

Electrospinning provides an enabling nanotechnology platform for generating a rich variety of novel structured materials in many biomedical applications including drug delivery, biosensing, tissue engineering, and regenerative medicine. In this review article, we begin with a thorough discussion on the method of producing 1D, 2D, and 3D electrospun nanofiber materials. In particular, we emphasize on how the 3D printing technology can contribute to the improvement of traditional electrospinning technology for the fabrication of 3D electrospun nanofiber materials as drug delivery devices/implants, scaffolds or living tissue constructs. We then highlight several notable examples of electrospun nanofiber materials in specific biomedical applications including cancer therapy, guiding cellular responses, engineering in vitro 3D tissue models, and tissue regeneration. Finally, we finish with conclusions and future perspectives of electrospun nanofiber materials for drug delivery and regenerative medicine.

[Review of the regeneration mechanism of complete spinal cord injury]

Spinal cord injury (SCI), especially the complete SCI, usually results in complete paralysis below the level of the injury and seriously affects the patient's quality of life. SCI repair is still a worldwide medical problem. In the last twenty years, Professor DAI Jianwu and his team pioneered complete SCI model by removing spinal tissue with varied lengths in rodents, canine, and non-human primates to verify therapeutic effect of different repair strategies. Moreover, they also started the first clinical study of functional collagen scaffold on patients with acute complete SCI on January 16th, 2015. This review mainly focusses on the possible mechanisms responsible for complete SCI. In common, recovery of some sensory and motor functions post complete SCI include the following three contributing reasons. ① Regeneration of long ascending and descending axons throughout the lesion site to re-connect the original targets; ② New neural circuits formed in the lesion site by newly generated neurons post injury, which effectively re-connect the transected stumps; ③ The combined effect of ① and ②. The numerous studies have confirmed that neural circuits rebuilt across the injury site by newborn neurons might be the main mechanisms for functional recovery of animals from rodents to dogs. In many SCI model, especially the complete spinal cord transection model, many studies have convincingly demonstrated that the quantity and length of regenerated long descending axons, particularly like CST fibers, are too few to across the lesion site that is millimeters in length to realize motor functional recovery. Hence, it is more feasible in guiding neuronal relays formation by bio-scaffolds implantation than directing long motor axons regeneration in improving motor function of animals with complete spinal cord transection. However, some other issues such as promoting more neuronal relays formation, debugging wrong connections, and maintaining adequate neural circuits for functional recovery are urgent problems to be addressed.

General Method for Generating Circular Gradients of Active Proteins on Nanofiber Scaffolds Sought for Wound Closure and Related Applications

Scaffolds functionalized with circular gradients of active proteins are attractive for tissue regeneration because of their enhanced capability to accelerate cell migration and/or promote neurite extension in a radial fashion. Here, we report a general method for generating circular gradients of active proteins on scaffolds composed of radially aligned nanofibers. In a typical process, the scaffold, with its central portion raised using a copper wire to take a cone shape, was placed in a container (upright or up-side-down), followed by dropwise addition of bovine serum albumin (BSA) solution into the container. As such, a circular gradient of BSA was generated along each nanofiber. The bare regions uncovered by BSA were then filled with an active protein of interest. In demonstrating their potential applications, we used different model systems to examine the effects of two types of protein gradients. While the gradient of laminin and epidermal growth factor accelerated the migration of fibroblasts and keratinocytes, respectively, from the periphery toward the center of the scaffold, the gradient of nerve growth factor promoted the radial extension of neurites from the embryonic chick dorsal root ganglion. This method for generating circular gradients of active proteins can be readily extended to different types of scaffolds to suit wound closure and related applications that involve cell migration and/or neurite extension in a radial fashion.