Toward Wearable Self-Charging Power Systems: The Integration of Energy-Harvesting and Storage Devices

High Performance Piezoelectric Nanogenerators Based on Polyvinylidene Fluoride-Graphene Nanoribbon Composite Thin Films

In this study, a highly efficient, sensitive, and lightweight piezoelectric nanogenerator (PENG) is developed using graphene nanoribbons (GNRs) incorporated into the polyvinylidene fluoride (PVDF) matrix. Unzipping multi-walled carbon nanotubes is an effective and scalable strategy for synthesizing graphene nanoribbons. The synthesized GNRs are employed to prepare nanometer-scale piezoelectric polymer composite films showing higher piezoelectric performance than neat PVDF. The impact of GNR concentration in the PVDF matrix on the electroactive phase content and piezoelectric properties of the composites is systematically investigated. X-ray diffraction (XRD) and Fourier-transformed infrared spectroscopy (FT-IR) analysis demonstrate an increase in the electroactive β and γ phases of PVDF by incorporating GNRs in the composites. With the optimized concentration of GNRs (1 wt%), the fabricated piezoelectric device can generate open-circuit voltage and an output power density of 26 V and 16.52 µWcm2, respectively. It is also found that the PVDF-GNR 1 nanogenerator can be used to generate electrical power by converting mechanical energy from different human activities such as wrist bending, palm tapping, and toe tapping. The findings indicate that (PVDF-GNR 1) PENG can be applied in self-powered portable and wearable electronic devices.

Advanced Energy Harvesters and Energy Storage for Powering Wearable and Implantable Medical Devices

Wearable and implantable active medical devices (WIMDs) are transformative solutions for improving healthcare, offering continuous health monitoring, early disease detection, targeted treatments, personalized medicine, and connected health capabilities. Commercialized WIMDs use primary or rechargeable batteries to power their sensing, actuation, stimulation, and communication functions, and periodic battery replacements of implanted active medical devices pose major risks of surgical infections or inconvenience to users. Addressing the energy source challenge is critical for meeting the growing demand of the WIMD market that is reaching valuations in the tens of billions of dollars. This review critically assesses the recent advances in energy harvesting and storage technologies that can potentially eliminate the need for battery replacements. With a key focus on advanced materials that can enable energy harvesters to meet the energy needs of WIMDs, this review examines the crucial roles of advanced materials in improving the efficiencies of energy harvesters, wireless charging, and energy storage devices. This review concludes by highlighting the key challenges and opportunities in advanced materials necessary to achieve the vision of self-powered wearable and implantable active medical devices, eliminating the risks associated with surgical battery replacement and the inconvenience of frequent manual recharging.

Effective Charging of Commercial Lithium Cell by Triboelectric Nanogenerator with Ultrahigh Voltage Energy Management

It is an increasingly mature application solution that triboelectric nanogenerator (TENG) supplies power to electronic devices through its power management system (PMS). However, the previous PMS is able to manage a limited voltage magnitude and the energy storage elements are limited to capacitors. This work proposes an ultrahigh voltage PMS (UV-PMS) to realize the charging of commercial lithium cells (LCs) by TENG. The design of UV-PMS enables energy management of TENGs with ultrahigh open-circuit voltages up to 3500 V and boosts the peak charging current from 30.9 µA to 2.77 mA, an increase of 89.64 times. With the introduction of UV-PMS, the effective charging capacity of LC charged by a TENG at a working frequency of 1.5 Hz for 1 h comes to 429.7 µAh, making a 75.3 times enhancement compared to charging by TENG directly. The maximum charging power comes to 1.56 mW. The energy storage efficiency is above 97% and the overall charge efficiency can be maintained at 81.2%. This work provides a reliable strategy for TENG to store energy in LC, and has promising applications in energy storage, LC's life, and self-powered systems.

Flexible Aqueous Supercapacitors for Long Cycle-Life Using Electrode with Multiple Active C═S Sites

Even though a few organic materials have attracted considerable attention for energy storage applications, their dissolution in the electrolyte during the charging-discharging processes presents a formidable challenge to their long-term performance. In this work, according to the principle of like dissolves like, non-polar trithiocyanuric acid (TCA) can effectively inhibit dissolution in an aqueous electrolyte, hence prolonging the cycle life. Moreover, theoretical calculations suggest that TCA lowers lowest unoccupied molecular orbital (LUMO) energy level, thereby promoting reaction kinetics. The CV curves of TCA maintain a rectangular structure even at a high scan rate of 1000 mV s‒1 and exhibit a remarkable capacitance retention rate of 93.1% after 50,000 cycles. Asymmetric flexible supercapacitors utilizing the TCA exhibit an impressive energy density. Moreover, they maintain 94.2% of their capacitance after undergoing 80,000 cycles. Their integration with perovskite solar cells to facilitate the rapid storage of photogenerated charges enables efficient solar energy utilization, providing a practical solution for capturing and storing renewable energy.

Multi-Interface Engineering of MXenes for Self-Powered Wearable Devices

Self-powered wearable devices with integrated energy supply module and sensitive sensors have significantly blossomed for continuous monitoring of human activity and the surrounding environment in healthcare sectors. The emerging of MXene-based materials has brought research upsurge in the fields of energy and electronics, owing to their excellent electrochemical performance, large surface area, superior mechanical performance, and tunable interfacial properties, where their performance can be further boosted via multi-interface engineering. Herein, a comprehensive review of recent progress in MXenes for self-powered wearable devices is discussed from the aspects of multi-interface engineering. The fundamental properties of MXenes including electronic, mechanical, optical, and thermal characteristics are discussed in detail. Different from previous review works on MXenes, multi-interface engineering of MXenes from termination regulation to surface modification and their impact on the performance of materials and energy storage/conversion devices are summarized. Based on the interfacial manipulation strategies, potential applications of MXene-based self-powered wearable devices are outlined. Finally, proposals and perspectives are provided on the current challenges and future directions in MXene-based self-powered wearable devices.

Recent Trends in Supercapacitor Research: Sustainability in Energy and Materials

Supercapacitors (SCs) have emerged as critical components in applications ranging from transport to wearable electronics due to their rapid charge-discharge cycles, high power density, and reliability. This review offers an analysis of recent strides in supercapacitor research, emphasizing pivotal developments in sustainability, electrode materials, electrolytes, and 'smart SCs' designed for modern microelectronics with attributes such as flexibility, stretchability, and biocompatibility. Central to this discourse are two dominant electrode materials: carbon materials (CMs), primarily in electric double layer capacitors (EDLCs), and pseudocapacitive materials, involving oxides/hydroxides, chalcogenides, metal-organic frameworks, conductive polymers and metal nitrides such as MXene. Despite EDLCs' historical use, challenges such as low energy density persist, with heteroatom introduction into the carbon lattice seen as a solution. Concurrently, pseudocapacitive materials dominate recent studies, with efficiency enhancement strategies, such as the creation of hybrids based on different types of materials, surface structural engineering and doping, under exploration. Electrolyte innovation, especially the shift towards gel polymer electrolytes for flexible SCs, and the harmonization of electrode materials with SC designs are highlighted. Emphasis is given to smart SCs with novel attributes such as self-charging, self-healing, biocompatibility, and environmentally conscious designs. In summary, the article underscores the drive in sustainable supercapacitor research to achieve high energy and power density, steering towards SCs that are efficient and versatile and involving bioderived/biocompatible SC materials. This brief review is based on selected recent references, offering depth combined with an accessible overview of the SC landscape.

Bio-catalyzed oxidation self-charging zinc-polymer batteries

Oxidation self-charging batteries have emerged with the demand for powering electronic devices around the clock. The low efficiency of self-charging has been the key challenge at present. Here, a more efficient autoxidation self-charging mechanism is realized by introducing hemoglobin (Hb) as a positive electrode additive in the polyaniline (PANI)-zinc battery system. The heme acts as a catalyst that reduces the energy barrier of the autoxidation reaction by regulating the charge and spin state of O2. To realize self-charging, the adsorbed O2 molecules capture electrons of the reduced (discharged state) PANI, leading to the desorption of zinc ions and the oxidation of PANI to complete self-charging. The battery can discharge for 12 min (0.5 C) after 50 self-charging/discharge cycles, while there is nearly no discharge capacity in the absence of Hb. This biology-inspired electronic regulation strategy may inspire new ideas to boost the performance of self-charging batteries.

An Ultrafast Air Self-Charging Zinc Battery

Air self-charging power systems possess the capability of energy harvesting, conversion, and storage simultaneously. However, in general, their self-charging rate is slow and the batteries cannot be oxidized to the fully charged state due to the weak oxidizability of O2 . Herein, an ultrafast air self-charging aqueous zinc battery is designed by constructing a polyaniline@Pt/C (PANI@Pt/C) composite cathode. The introduction of Pt/C catalyst endows the redox reaction between PANI and O2 with fast reaction kinetics and extended redox potential difference. Therefore, the self-charging rate of the Zn/PANI@Pt/C batteries is effectively accelerated and they can be self-charged to fully charged state. Furthermore, the PANI can be recharged by O2 simultaneously during discharging process to compensate the consumed electrical energy, achieving prolonged energy supply. In addition, the PANI@Pt/C cathodes can be directly used as the cathodes of flexible self-charging zinc batteries due to their excellent mechanical properties. As a proof of concept, flexible soft-packaged Zn/PANI@Pt/C batteries are fabricated and displayed stable electrochemical performance and self-rechargeability even at different bending states. A route is provided here to design ultrafast chemical self-charging energy storage devices and the horizons of flexible energy storage devices are broadened.

Perovskite-Solar-Cell-Powered Integrated Fuel Conversion and Energy-Storage Devices

Metal halide hybrid perovskite solar cells (PSCs) have received considerable attention over the past decade owing to their potential for low-cost, solution-processable, earth-abundant, and high-performance superiority, increasing power conversion efficiencies of up to 25.7%. Solar energy conversion into electricity is highly efficient and sustainable, but direct utilization, storage, and poor energy diversity are difficult to achieve, resulting in a potential waste of resources. Considering its convenience and feasibility, converting solar energy into chemical fuels is regarded as a promising pathway for boosting energy diversity and expanding its utilization. In addition, the energy conversion-storage integrated system can efficiently sequentially capture, convert, and store energy in electrochemical energy storage devices. However, a comprehensive overview focusing on PSC-self-driven integrated devices with a discussion of their development and limitations remains lacking. Here, focus is on the development of representative configurations of emerging PSC-based photo-electrochemical devices including self-charging power packs, unassisted solar water splitting/CO2 reduction. The advanced progresses in this field, including configuration design, key parameters, working principles, integration strategies, electrode materials, and their performance evaluations are also summarized. Finally, scientific challenges and future perspectives for ongoing research in this field are presented.

Enabling giant thermopower by heterostructure engineering of hydrated vanadium pentoxide for zinc ion thermal charging cells

Flexible power supply devices provide possibilities for wearable electronics in the Internet of Things. However, unsatisfying capacity or lifetime of typical batteries or capacitors seriously limit their practical applications. Different from conventional heat-to-electricity generators, zinc ion thermal charging cells has been a competitive candidate for the self-power supply solution, but the lack of promising cathode materials has restricted the achievement of promising performances. Herein, we propose an attractive cathode material by rational heterostructure engineering of hydrated vanadium pentoxide. Owing to the integration of thermodiffusion and thermoextraction effects, the thermopower is significantly improved from 7.8 ± 2.6 mV K-1 to 23.4 ± 1.5 mV K-1. Moreover, an impressive normalized power density of 1.9 mW m-2 K-2 is achieved in the quasi-solid-state cells. In addition, a wearable power supply constructed by three units can drive the commercial health monitoring system by harvesting body heat. This work demonstrates the effectiveness of electrodes design for wearable thermoelectric applications.

Photoelectrochemical Engineering for Light-Assisted Rechargeable Metal Batteries: Mechanism, Development, and Future

Rechargeable battery devices with high energy density are highly demanded by  our  modern society. The use of metal anodes is extremely attractive for future rechargeable battery devices. However, the notorious metal dendritic and instability of solid electrolyte interface issues pose a series of challenges for metal anodes. Recently, considering the indigestible dynamical behavior of metal anodes, photoelectrochemical engineering of light-assisted metal anodes have been rapidly developed since they efficiently utilize the integration and synergy of oriented crystal engineering and photocatalysis engineering, which provided a potential way to unlock the interface electrochemical mechanism and deposition reaction kinetics of metal anodes. This review starts with the fundamentals of photoelectrochemical engineering and follows with the state-of-art advance of photoelectrochemical engineering for light-assisted rechargeable metal batteries where photoelectrode materials, working principles, types, and practical applications are explained. The last section summarizes the major challenges and some invigorating perspectives for future research on light-assisted rechargeable metal batteries.

Mosaic Charge Distribution-Based Sliding and Pressing Triboelectrification under Wavy Configuration

As high-voltage output and fast response devices, triboelectric nanogenerators (TENGs) are widely used for sensors with fast and high-sensitivity performance. As a primary electrical signal, the waveform output provides an accurate and rapid response to external stimulus parameters such as press and slide. Here, based on mosaic charging and residual charge theories, the contact charging principle of TENGs is further discussed. Moreover, a wavy structure is obtained in the vertical contact separation and lateral sliding modes to further study the influence of external parameters applied to TENGs, which thus helps further the understanding of the output waveforms. The experimental results show that wavy TENGs have output properties that are excellent compared to those of TENGs with flat structures, such as longer charging and discharging times and more complex waveforms. By researching the waveform in depth, our work will provide new prospects for application in various sensors of interactive wearable systems, intelligent robots, and optoelectronic devices based on TENGs.

Enhancement of thermoelectric power factor via electron energy filtering in Cu doped MoS2 on carbon fabric for wearable thermoelectric generator applications

The design and construction of state-of-the-art wearable thermoelectric materials are important for the development of self-powered wearable thermoelectric generators (WTEGs). Molybdenum disulfide (MoS₂) has been reported as a noteworthy thermoelectric (TE) material because of its large intrinsic bandgap and high carrier mobility. In this work, Cu-doped two-dimensional layered MoS₂ nanosheets were grown on carbon fabric (CF) via a hydrothermal method. The electrical conductivity, Seebeck coefficient, and power factor for the Cu-doped MoS₂ were found to increase with increasing temperature. The maximum Seebeck coefficient was obtained for a MoS₂ sample doped with 4 at% of Cu (CM4) was ∼10 μV/K at 303 K and ∼13 μV/K at 373 K. The enhancement in the Seebeck coefficient was attributed to an energy-filtering effect caused by the interfacial barrier between MoS₂ and Cu. In addition, a thermoelectric device was designed with four pairs of TE materials, where CM4 (4 at%) was used as a p-type material and Cu wire was used as an n-type material. These p- and n-type materials were connected electrically in series and thermally in parallel to generate a voltage of 190.7 μV at a temperature gradient of 8 K.

High Thermoelectric Performance and Ultrahigh Flexibility Ag2S1-xSex film on a Nylon Membrane

Flexible thermoelectric (TE) generators have recently attracted increasing attention as they have the potential to power wearable devices using the temperature difference between the human body and the environment. Ag₂S is recently reported to have plasticity near room temperature; however, it has very low electrical conductivity, leading to its poor TE property. Here, to improve the TE property, different amounts of Se (Se/Ag₂S molar ratios being 0.4, 0.5, and 0.6) solid solution-substituted Ag₂S films on a nylon membrane are prepared by combing wet-chemical synthesis, vacuum filtration, and hot-pressing. The film (Se/Ag₂S molar ratio = 0.6) exhibits a better TE performance with a power factor of 477.4 ± 15.20 μW m^-1 K^-2 at room temperature, which is comparable to that of bulk Ag₂S_1-xSe_x. In addition, the film possesses excellent flexibility (only ∼5.4% decrease in electrical conductivity after 2000 times bending along a rod with a radius of 4 mm). The power density of a 6-leg TE generator assembled with the film is 6.6 W/m² under a temperature difference of 28.8 K. This work provides a facile new route to Ag₂S-based TE films with low cost, high TE performance, and ultrahigh flexibility.

Functional Fiber Materials to Smart Fiber Devices

The development of fiber materials has accompanied the evolution of human civilization for centuries. Recent advances in materials science and chemistry offered fibers new applications with various functions, including energy harvesting, energy storing, displaying, health monitoring and treating, and computing. The unique one-dimensional shape of fiber devices endows them advantages to work as human-interfaced electronics due to the small size, lightweight, flexibility, and feasibility for integration into large-scale textile systems. In this review, we first present a discussion of the basics of fiber materials and the design principles of fiber devices, followed by a comprehensive analysis on recently developed fiber devices. Finally, we provide the current challenges facing this field and give an outlook on future research directions. With novel fiber devices and new applications continuing to be discovered after two decades of research, we envision that new fiber devices could have an important impact on our life in the near future.

Intelligent wearable devices based on nanomaterials and nanostructures for healthcare

Emerging classes of flexible electronic sensors as alternatives to conventional rigid sensors offer a powerful set of capabilities for detecting and quantifying physiological and physical signals from human skin in personal healthcare. Unfortunately, the practical applications and commercialization of flexible sensors are generally limited by certain unsatisfactory aspects of their performance, such as biocompatibility, low sensing range, power supply, or single sensory function. This review intends to provide up-to-date literature on wearable devices for smart healthcare. A systematic review is provided, from sensors based on nanomaterials and nanostructures, algorithms, to multifunctional integrated devices with stretchability, self-powered performance, and biocompatibility. Typical electromechanical sensors are investigated with a specific focus on the strategies for constructing high-performance sensors based on nanomaterials and nanostructures. Then, the review emphasizes the importance of tailoring the fabrication techniques in order to improve stretchability, biocompatibility, and self-powered performance. The construction of wearable devices with high integration, high performance, and multi-functionalization for multiparameter healthcare is discussed in depth. Integrating wearable devices with appropriate machine learning algorithms is summarized. After interpretation of the algorithms, intelligent predictions are produced to give instructions or predictions for smart implementations. It is desired that this review will offer guidance for future excellence in flexible wearable sensing technologies and provide insight into commercial wearable sensors.

Correlating multimode strain and electrode configurations for high-performance gradient-index phononic crystal-based piezoelectric energy harvesting

A gradient-index phononic crystal (GRIN PnC) capable of manipulating wave propagation can serve as an excellent input wave energy focusing platform for amplifying energy harvesting power generation. However, despite its remarkable focusing capability, the finite wavelength of the propagating elastic waves in the focal area causes voltage cancellation inside a piezoelectric element under multimode strains having opposite directions; this limits the capacity of the GRIN PnC-based energy harvesting system. This study demonstrates a rational electrode configuration for a piezoelectric energy harvesting (PEH) device that can maximize the performance of a given GRIN PnC platform. The multimode strain analysis experimentally performed on the PEHs distributed over the focusing area confirms that the patterned electrode PEH configuration is the most effective in alleviating strain and voltage cancellation while efficiently transferring the focused elastic wave energy. Furthermore, a proper combination of electrical connections between the patterned electrodes substantially increases the piezoelectric potential across the ceramic by maximizing the strain difference. The simultaneous tailoring of the piezoelectric ceramic composition and the electrode configuration leads to a maximum power generation of 7.06 mW even under off-resonance conditions, the largest ever reported in elastic wave energy harvesting.

Fabrication of Conductive Fabrics Based on SWCNTs, MWCNTs and Graphene and Their Applications: A Review

In recent years, the field of conductive fabrics has been challenged by the increasing popularity of these materials in the production of conductive, flexible and lightweight textiles, so-called smart textiles, which make our lives easier. These electronic textiles can be used in a wide range of human applications, from medical devices to consumer products. Recently, several scientific results on smart textiles have been published, focusing on the key factors that affect the performance of smart textiles, such as the type of substrate, the type of conductive materials, and the manufacturing method to use them in the appropriate application. Smart textiles have already been fabricated from various fabrics and different conductive materials, such as metallic nanoparticles, conductive polymers, and carbon-based materials. In this review, we study the fabrication of conductive fabrics based on carbon materials, especially carbon nanotubes and graphene, which represent a growing class of high-performance materials for conductive textiles and provide them with superior electrical, thermal, and mechanical properties. Therefore, this paper comprehensively describes conductive fabrics based on single-walled carbon nanotubes, multi-walled carbon nanotubes, and graphene. The fabrication process, physical properties, and their increasing importance in the field of electronic devices are discussed.

Perovskite Piezoelectric-Based Flexible Energy Harvesters for Self-Powered Implantable and Wearable IoT Devices

In the ongoing fourth industrial revolution, the internet of things (IoT) will play a crucial role in collecting and analyzing information related to human healthcare, public safety, environmental monitoring and home/industrial automation. Even though conventional batteries are widely used to operate IoT devices as a power source, these batteries have a drawback of limited capacity, which impedes broad commercialization of the IoT. In this regard, piezoelectric energy harvesting technology has attracted a great deal of attention because piezoelectric materials can convert electricity from mechanical and vibrational movements in the ambient environment. In particular, piezoelectric-based flexible energy harvesters can precisely harvest tiny mechanical movements of muscles and internal organs from the human body to produce electricity. These inherent properties of flexible piezoelectric harvesters make it possible to eliminate conventional batteries for lifetime extension of implantable and wearable IoTs. This paper describes the progress of piezoelectric perovskite material-based flexible energy harvesters for self-powered IoT devices for biomedical/wearable electronics over the last decade.

Elastic Fibers/Fabrics for Wearables and Bioelectronics

Wearables and bioelectronics rely on breathable interface devices with bioaffinity, biocompatibility, and smart functionality for interactions between beings and things and the surrounding environment. Elastic fibers/fabrics with mechanical adaptivity to various deformations and complex substrates, are promising to act as fillers, carriers, substrates, dressings, and scaffolds in the construction of biointerfaces for the human body, skins, organs, and plants, realizing functions such as energy exchange, sensing, perception, augmented virtuality, health monitoring, disease diagnosis, and intervention therapy. This review summarizes and highlights the latest breakthroughs of elastic fibers/fabrics for wearables and bioelectronics, aiming to offer insights into elasticity mechanisms, production methods, and electrical components integration strategies with fibers/fabrics, presenting a profile of elastic fibers/fabrics for energy management, sensors, e-skins, thermal management, personal protection, wound healing, biosensing, and drug delivery. The trans-disciplinary application of elastic fibers/fabrics from wearables to biomedicine provides important inspiration for technology transplantation and function integration to adapt different application systems. As a discussion platform, here the main challenges and possible solutions in the field are proposed, hopefully can provide guidance for promoting the development of elastic e-textiles in consideration of the trade-off between mechanical/electrical performance, industrial-scale production, diverse environmental adaptivity, and multiscenario on-spot applications.

Design and Testing of Autonomous Chargeable and Wearable Sweat/Ionic Liquid-Based Supercapacitors

This work demonstrates ionic liquid electrolyte-inscribed sweat-based dual electrolyte functioning supercapacitors capable of self-charging through sweat electrolyte function under a non-enzymatic route. The supercapacitor electrodes are fabricated from TREN (tris(2-aminoethyl)amine), poly-3,4-ethylenedioxythiophene, and a graphene oxide mixture with copper-mediated chelate, and this polymer-GO-metal chelate film can produce excellent energy harvest/storage performance from a sweat and ionic liquid integrated electrolyte system. The fabricated device is specifically designed to reduce deterioration using a typical planar structure. In the presence of sweat with ionic liquid, the dual electrolyte mode supercapacitor exhibits a maximum areal capacitance of 3600 mF cm^-2 , and the energy density is 450 mWhcm^-2 , which is more than 100 times greater than that from previously reported supercapacitors. The supercapacitors were fabricated/attached directly to textile fabrics as well as ITO-PET (Indium tin oxide (ITO)-polyethylene terephthalate (PET) film to study their performance on the human body during exercise. The self-charging performance with respect to sweat wetting time for the sweat@ionic liquid dual electrolyte showed that the supercapacitor performed well on both fabric and film. These devices exhibited good response for pH effect and biocompatibility, and as such present a promising multi-functional energy system as a stable power source for next-generation wearable smart electronics.

Energy Interplay in Materials: Unlocking Next-Generation Synchronous Multisource Energy Conversion with Layered 2D Crystals

Layered 2D crystals have unique properties and rich chemical and electronic diversity, with over 6000 2D crystals known and, in principle, millions of different stacked hybrid 2D crystals accessible. This diversity provides unique combinations of properties that can profoundly affect the future of energy conversion and harvesting devices. Notably, this includes catalysts, photovoltaics, superconductors, solar-fuel generators, and piezoelectric devices that will receive broad commercial uptake in the near future. However, the unique properties of layered 2D crystals are not limited to individual applications and they can achieve exceptional performance in multiple energy conversion applications synchronously. This synchronous multisource energy conversion (SMEC) has yet to be fully realized but offers a real game-changer in how devices will be produced and utilized in the future. This perspective highlights the energy interplay in materials and its impact on energy conversion, how SMEC devices can be realized, particularly through layered 2D crystals, and provides a vision of the future of effective environmental energy harvesting devices with layered 2D crystals.

Recent progress in electrospun nanomaterials for wearables

Wearables have garnered significant attention in recent years not only as consumer electronics for entertainment, communications, and commerce but also for real-time continuous health monitoring. This has been spurred by advances in flexible sensors, transistors, energy storage, and harvesting devices to replace the traditional, bulky, and rigid electronic devices. However, engineering smart wearables that can seamlessly integrate with the human body is a daunting task. Some of the key material attributes that are challenging to meet are skin conformability, breathability, and biocompatibility while providing tunability of its mechanical, electrical, and chemical properties. Electrospinning has emerged as a versatile platform that can potentially address these challenges by fabricating nanofibers with tunable properties from a polymer base. In this article, we review advances in wearable electronic devices and systems that are developed using electrospinning. We cover various applications in multiple fields including healthcare, biomedicine, and energy. We review the ability to tune the electrical, physiochemical, and mechanical properties of the nanofibers underlying these applications and illustrate strategies that enable integration of these nanofibers with human skin.

A Robust Silicone Rubber Strip-Based Triboelectric Nanogenerator for Vibration Energy Harvesting and Multi-Functional Self-Powered Sensing

Vibration is a common phenomenon in various fields which can not only indicate the working condition of the installation, but also serve as an energy source if it is efficiently harvested. In this work, a robust silicone rubber strip-based triboelectric nanogenerator (SRS-TENG) for vibration energy harvesting and multi-functional self-powered sensing is proposed and systematically investigated. The SRS-TENG consists of a silicone rubber strip and two aluminum electrode layers supported by polylactic acid (PLA), and acts as a sustainable power source and vibration frequency, amplitude and acceleration sensor as well. The soft contact between the aluminum electrode and silicone rubber strip makes it robust and stable even after 14 days. It can be applied in ranges of vibration frequencies from 5 to 90 Hz, and amplitudes from 0.5 to 9 mm, which shows it has advantages in broadband vibration. Additionally, it can achieve lower startup limits due to its soft structure and being able to work in multi-mode. The output power density of the SRS-TENG can reach 94.95 W/m³, matching a resistance of 250 MΩ, and it can light up more than 100 LEDs and power a commercial temperature sensor after charging capacitors. In addition, the vibration amplitude can be successfully detected and displayed on a human–machine interface. Moreover, the frequency beyond a specific limit can be distinguished by the SRS-TENG as well. Therefore, the SRS-TENG can be utilized as an in situ power source for distributed sensor nodes and a multifunctional self-powered vibration sensor in many scenarios.

Harvesting circuits for triboelectric nanogenerators for wearable applications

Internet of Things (IoT) and recently Internet of Nano Things (IoNT) bear the promise of new devices able to communicate and assist our daily lives toward wearable technologies which demand a versatile integration such as in wireless body networks (WBN), sensing, and health monitorization. These must comply with stringent constraints on energy usage. Dimensions and complexity intensify the need for small and maintenance-free power sources. Environment energy harvesting and storage is an important approach to sustain operation for a long time. Triboelectric nanogenerators (TENGs) arise as a strong and promising solution to power the new field of outcoming self-sustainable devices, implantable, and wearable devices. They can transform mechanical energy in different modes, have simple structures, and use vulgar and sustainable materials. This paper makes a review about TENGs technology, construction, materials, operation, and focus on strategies for harvesting circuits. Main challenges like efficiency, reliability, energy storage, and sustainability are discussed.

Piezoelectric nanogenerators for personalized healthcare

The development of flexible piezoelectric nanogenerators has experienced rapid progress in the past decade and is serving as the technological foundation of future state-of-the-art personalized healthcare. Due to their highly efficient mechanical-to-electrical energy conversion, easy implementation, and self-powering nature, these devices permit a plethora of innovative healthcare applications in the space of active sensing, electrical stimulation therapy, as well as passive human biomechanical energy harvesting to third party power on-body devices. This article gives a comprehensive review of the piezoelectric nanogenerators for personalized healthcare. After a brief introduction to the fundamental physical science of the piezoelectric effect, material engineering strategies, device structural designs, and human-body centered energy harvesting, sensing, and therapeutics applications are also systematically discussed. In addition, the challenges and opportunities of utilizing piezoelectric nanogenerators for self-powered bioelectronics and personalized healthcare are outlined in detail.

Micro Energy Storage Systems in Energy Harvesting Applications: Analytical Evaluation towards Future Research Improvement

During the last decade, countless advancements have been made in the field of micro-energy storage systems (MESS) and ambient energy harvesting (EH) shows great potential for research and future improvement. A detailed historical overview with analysis, in the research area of MESS as a form of ambient EH, is presented in this study. The top-cited articles in the field of MESS ambient EH were selected from the Scopus database, and based on articles published from 2010 to 2021, and the number of citations. The search for these top-cited articles was conducted in the third week of December 2021. Mostly the manuscripts were technical and contained an experimental setup with algorithm development (65%), whereas 27.23% of the articles were survey-based. One important observation was that the top 20 selected articles, which are the most-cited articles in the different journals, come from numerous countries of origin. This study revealed that the MESS integrated renewable energy sources (RESs) are an enhancement field of research for EH applications. On the basis of this survey, we hope to identify and solve research problems in the field of MESS and RESs integration, and provide suggestions for future developments for EH applications.

Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect

The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.

Self-Rebound Cambered Triboelectric Nanogenerator Array for Self-Powered Sensing in Kinematic Analytics

In challenging and dangerous equestrian sports, kinematic analysis and injury prevention based on distributed, portable, and real-time sensing technology is particularly important. Here, we report a flexible self-rebound cambered triboelectric nanogenerator that addresses the concerns and shows its applications for self-powered sensing in kinematic analysis. Benefiting from simple and effective design, ordinary materials by means of self-rebound cambered structure evolved into a micro-biomechanical energy harvester with mechanical properties including over 3000 cycles durability and superior resiliency and stability. At a size of 4.52 cm², it could deliver a power density of 1.25 mW/m² under an external load resistance of 60 MΩ. A self-powered riding characteristic sensing system has been developed with fast response time of 16 ms, to provide real-time statistics data and fall prediction for both horsemen and coaches, to take traditional equestrian sports to a advanced state. This work not only can promote the development of triboelectric nanogenerators in micro-biomechanical energy harvesting, but also could expand the application range of the self-powered system to intelligent sport monitoring and assisting.

Artificial Intelligence-Enabled Caregiving Walking Stick Powered by Ultra-Low-Frequency Human Motion

The increasing population of the elderly and motion-impaired people brings a huge challenge to our social system. However, the walking stick as their essential tool has rarely been investigated into its potential capabilities beyond basic physical support, such as activity monitoring, tracing, and accident alert. Here, we report a walking stick powered by ultra-low-frequency human motion and equipped with deep-learning-enabled advanced sensing features to provide a healthcare-monitoring platform for motion-impaired users. A linear-to-rotary structure is designed to achieve highly efficient energy harvesting from the linear motion of a walking stick with ultralow frequency. Besides, two kinds of self-powered triboelectric sensors are proposed and integrated to extract the motion features of the walking stick. Augmented sensing functionalities with high accuracies have been enabled by deep-learning-based data analysis, including identity recognition, disability evaluation, and motion status distinguishing. Furthermore, a self-sustainable Internet of Things (IoT) system with global positioning system tracing and environmental temperature and humidity amenity sensing functions is obtained. Combined with the aforementioned functionalities, this walking stick is demonstrated in various usage scenarios as a caregiver for real-time well-being status and activity monitoring. The caregiving walking stick shows the potential of being an intelligent aid for motion-impaired users to help them live life with adequate autonomy and safety.

Bio-inspired strategies for next-generation perovskite solar mobile power sources

Smart electronic devices are becoming ubiquitous due to many appealing attributes including portability, long operational time, rechargeability and compatibility with the user-desired form factor. Integration of mobile power sources (MPS) based on photovoltaic technologies with smart electronics will continue to drive improved sustainability and independence. With high efficiency, low cost, flexibility and lightweight features, halide perovskite photovoltaics have become promising candidates for MPS. Realization of these photovoltaic MPS (PV-MPS) with unconventionally extraordinary attributes requires new 'out-of-box' designs. Natural materials have provided promising designing solutions to engineer properties under a broad range of boundary conditions, ranging from molecules, proteins, cells, tissues, apparatus to systems in animals, plants, and humans optimized through billions of years of evolution. Applying bio-inspired strategies in PV-MPS could be biomolecular modification on crystallization at the atomic/meso-scale, bio-structural duplication at the device/system level and bio-mimicking at the functional level to render efficient charge delivery, energy transport/utilization, as well as stronger resistance against environmental stimuli (e.g., self-healing and self-cleaning). In this review, we discuss the bio-inspired/-mimetic structures, experimental models, and working principles, with the goal of revealing physics and bio-microstructures relevant for PV-MPS. Here the emphasis is on identifying the strategies and material designs towards improvement of the performance of emerging halide perovskite PVs and strategizing their bridge to future MPS.

Designing flexible, smart and self-sustainable supercapacitors for portable/wearable electronics: from conductive polymers

The rapid development of portable/wearable electronics proposes new demands for energy storage devices, which are flexibility, smart functions and long-time outdoor operation. Supercapacitors (SCs) show great potential in portable/wearable applications, and the recently developed flexible, smart and self-sustainable supercapacitors greatly meet the above demands. In these supercapacitors, conductive polymers (CPs) are widely applied due to their high flexibility, conductivity, pseudo-capacitance, smart characteristics and moderate preparation conditions. Herein, we'd like to introduce the CP-based flexible, smart and self-sustainable supercapacitors for portable/wearable electronics. This review first summarizes the flexible SCs based on CPs and their composites with carbon materials and metal compounds. The smart supercapacitors, i.e., electrochromic, electrochemical actuated, stretchable, self-healing and stimuli-sensitive ones, are then presented. The self-sustainable SCs which integrate SC units with energy-harvesting units in one compact configuration are also introduced. The last section highlights some current challenges and future perspectives of this thriving field.

Flexible, anti-freezing self-charging power system composed of cellulose based supercapacitor and triboelectric nanogenerator

A self-charging power system composed of cellulose organohydrogel based supercapacitor and triboelectric nanogenerator is constructed in the present work. Cellulose organohydrogels with flexibility, optical transparency, conductivity and excellent low temperature tolerance are fabricated via a dissolution and regeneration process. The optical transmittance, elongation at break, and conductivity of the cellulose organohydrogel reach 93%, 242%, and 1.92 S/m, as well as excellent anti-freezing property down to -54.3 °C, potential as flexible conductive device in harsh conditions. When demonstrated as energy storage device, the cellulose organohydrogel based supercapacitor demonstrates excellent supercapacitor performances, durability against deformation and resistance to low temperature. When demonstrated as energy harvesting device, the cellulose organohydrogel based triboelectric nanogenerator displays stability, and resistance to both low temperature and a large number of operation cycles. As the cellulose based triboelectric nanogenerator is integrated with cellulose based supercapacitor, a flexible and anti-freezing self-charging power system is built, capable of driving miniaturized electronics, demonstrating great potential as wearable power system in harsh conditions.

Ultra-Flexible Organic Photovoltaics with Low-Temperature Deposited IZTO on a Cyclic Polymer Substrate Having Excellent Mechanical Properties

In this study, ultra-flexible organic photovoltaics (OPVs) with a new device structure are developed as a power source for ultra-flexible wearable devices with excellent biocompatibility. To fabricate ultra-flexible OPVs with excellent mechanical properties, we develop an ultra-flexible substrate with a bilayer structure based on polymers and transparent conducting oxides. An amorphous perfluorinated polymer (cyclic transparent optical polymer, CYTOP) is introduced as an ultra-flexible substrate by a solution process. An indium zinc tin oxide (IZTO) transparent electrode possessing an amorphous structure is fabricated via pulsed DC magnetron sputtering at room temperature using a target containing 80 atom % In₂O₃-10 atom % ZnO-10 atom % SnO₂. Ultra-flexible OPVs with a one-dimensional (1D) grating pattern are fabricated on the buffer layer and photoactive layer. These OPVs exhibit an increase of 12% in power conversion efficiency (PCE) (maximum PCE: 8.52%) compared to the reference, thereby minimizing reliance on the incident angle of light. In addition, even after 1000 compression/relaxation tests with a compression strain of 33%, the PCE of the ultra-flexible OPVs is maintained up to 94.8% of its initial value.

Solution-Synthesized SnSe1-xSx: Dual-Functional Materials with Enhanced Electrochemical Storage and Thermoelectric Performance

The exploration of materials with multifunctional properties, such as energy harvesting and storage, is crucial in integrated energy devices and technologies. Herein, through an organic-free "soft chemical" solution method, a series of dual-functional SnSe_1-xS_x (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) nanoparticles have been developed toward high-performance electrochemical energy storage and thermoelectric conversion. Among the synthesized S-substituted SnSe, SnSe_0.5S_0.5 exhibits the highest rate capacity (546.1 mA h g^-1 at 2 A g^-1) and the best reversible capacity (556.2 mA h g^-1 at 0.1 A g^-1 after 100 cycles), which are much enhanced compared to those of SnSe. Density functional theory calculation confirms that the composition regulation by S substitution can lower the diffusion barrier of Li⁺, boost the diffusion rate of Li⁺, and in turn enhance the electrochemical kinetics, thus increasing the Li⁺ storage performance. Meanwhile, partially replacing Se by S decreases the lattice thermal conductivity, leading to an improved peak zT of 0.64 at 773 K in SnSe_0.9S_0.1, which is enhanced compared to the value for SnSe obtained at the same temperature. This study develops a combined composition tuning-nanostructuring approach for optimizing the electrochemical and thermoelectric performance of dual-functional SnSe.

Metal-Nitrogen-Carbon Catalysts of Specifically Coordinated Configurations toward Typical Electrochemical Redox Reactions

Metal-nitrogen-carbon (M-N-C) material with specifically coordinated configurations is a promising alternative to costly Pt-based catalysts. In the past few years, great progress is made in the studies of M-N-C materials, including the structure modulation and local coordination environment identification via advanced synthetic strategies and characterization techniques, which boost the electrocatalytic performances and deepen the understanding of the underlying fundamentals. In this review, the most recent advances of M-N-C catalysts with specifically coordinated configurations of M-N_x (x = 1-6) are summarized as comprehensively as possible, with an emphasis on the synthetic strategy, characterization techniques, and applications in typical electrocatalytic reactions of the oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, CO₂ reduction reaction, etc., along with mechanistic exploration by experiments and theoretical calculations. Furthermore, the challenges and potential perspectives for the future development of M-N-C catalysts are discussed.

Printable elastomeric electrodes with sweat-enhanced conductivity for wearables

We rationally synthesized the thermoplastic and hydrophilic poly(urethane-acrylate) (HPUA) binder for a type of printable and stretchable Ag flakes-HPUA (Ag-HPUA) electrodes in which the conductivity can be enhanced by human sweat. In the presence of human sweat, the synergistic effect of Cl- and lactic acid enables the partial removal of insulating surfactant on silver flakes and facilitates sintering of the exposed silver flakes, thus the resistance of Ag-HPUA electrodes can be notably reduced in both relaxed and stretched state. The on-body data show that the resistance of one electrode has been decreased from 3.02 to 0.62 ohm during the subject's 27-min sweating activity. A stretchable textile sweat-activated battery using Ag-HPUA electrodes as current collectors and human sweat as the electrolyte was constructed for wearable electronics. The enhanced conductivity of the wearable wiring electrode from the reaction with sweat would provide meritorious insight into the design of wearable devices.

Wearable Helical Molybdenum Nitride Supercapacitors for Self-Powered Healthcare Smartsensors

To meet the increasing demand for wearable sensing devices, flexible supercapacitors (SCs) as energy storage devices play significant roles in powering sensors/biosensors for healthcare monitoring. Because of its high conductivity and remarkable specific capacitance in SCs, molybdenum nitride (MoN) has been widely used. Herein, a flexible helical structure of MoN modified on nitrogen-doped carbon cloth (CC@CN@MoN) has been prepared by a simple nitride process, delivering an ultralong cycle life of 10,000 cycles and high areal capacitance of 467.6 mF cm^-2 as SCs. Moreover, the as-fabricated flexible all-solid-state asymmetrical SCs (ASCs) of CC@CN@MoN//CC@NiCo₂O₄ demonstrated outstanding electrochemical behavior after 10,000 cycles and over 90% retention, and the value of areal capacitance could reach 90.8 mF cm^-2 at 10 mA cm^-2. Integrated with solar energy, ASCs could be used as a self-powered energy system for strain sensors in detecting human movement, and finger movements could be further real-time monitored remotely via a smartphone. Prospectively, wearable helical MoN solid-state SCs for self-powered strain smartsensors would inspire the development of structured materials in the application of energy storage, portable self-powering, and strain or chemical/biochemical smartsensors.

Electronic fibers and textiles: Recent progress and perspective

Wearable electronics are receiving increasing attention with the advances of human society and technologies. Among various types of wearable electronics, electronic fibers/textiles, which integrate the comfort and appearance of conventional fibers/textiles with the functions of electronic devices, are expected to play important roles in remote health monitoring, disease diagnosis/treatment, and human-machine interface. This article aims to review the recent advances in electronic fibers/textiles, thus providing a comprehensive guiding reference for future work. First, we review the selection of functional materials and fabrication strategies of fiber-shaped electronic devices with emphasis on the newly developed functional materials and technologies. Their applications in sensing, light emitting, energy harvest, and energy storage are discussed. Then, the fabrication strategies and applications of electronic textiles are summarized. Furthermore, the integration of multifunctional electronic textiles and their applications are summarized. Finally, we discuss the existing challenges and propose the future development of electronic fibers/textiles.

Enhanced thermoelectric performance of graphene based nanocomposite coated self-powered wearable e-textiles for energy harvesting from human body heat

The demand for highly flexible and self-powered wearable textile devices has increased in recent years. Graphene coated textile-based wearable devices have been used for energy harvesting and storage due to their outstanding mechanical, electrical and electronic properties. However, the use of metal based nanocomposites is limited in textiles, due to their poor bending, fixation, and binding on textiles. We present here reduced graphene oxide (rGO) as an n-type and conductive polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as a p-type material for a wearable thermoelectric nanogenerator (TEG) using a (pad–dry–cure) technique. We developed a reduced graphene oxide (rGO) coated textile-based wearable TEG for energy harvesting from low-grade human body heat. The conductive polymer (PEDOT:PSS) and (rGO) nanocomposite were coated using a layer by layer approach. The resultant fabric showed higher weight pickup of 60–80%. The developed textile based TEG device showed an enhanced Seebeck coefficient of (25–150 μV K⁻¹), and a power factor of (2.5–60 μW m⁻¹ K⁻¹). The developed TE device showed a higher potential to convert the low-grade body heat into electrical energy, between the human body temperature of (36.5 °C) and an external environment of (20.0 ± 5 °C) with a temperature difference of (2.5–16.5 °C). The wearable textile-based TEG is capable of producing an open circuit output voltage of 12.5–119.5 mV at an ambient fixed temperature of (20 °C). The rGO coated textile fabric also showed reduced electrical sheet resistance by increasing the number of dyeing cycles (10) and increased with the number of (20) washing cycles. The developed reduced graphene oxide (rGO) coated electrodes showed a sheet resistance of 185–45 kΩ and (15 kΩ) for PEDOT:PSS–rGO nanocomposites respectively. Furthermore, the mechanical performance of the as coated textile fabric was enhanced from (20–80 mPa) with increasing number of padding cycles. The thermoelectric performance was significantly improved, without influencing the breath-ability and comfort properties of the resultant fabric. This study presents a promising approach for the fabrication of PEDOT:PSS/rGO nano-hybrids for textile-based wearable thermoelectric generators (TEGs) for energy harvesting from low-grade body heat.

Experimental process diagram for the fabrication of PEDOT:PSS–rGO based electronic textiles on a mass scale.

Flourishing energy harvesters for future body sensor network: from single to multiple energy sources

Body sensor network (bodyNET) offers possibilities for future disease diagnosis, preventive health care, rehabilitation, and treatment. However, the eventual realization demands reliable and sustainable power sources. The flourishing energy harvesters (EHs) have provided prominent techniques for practically addressing the concurrent energy issue. Targeting for a specific energy source, wearable EHs with a sole conversion mechanism are well investigated. Hybrid EHs integrating different effects for a single source or multi-sources are attaining growing attention, for they provide another degree of freedom concerning a higher-level energy utility. Merging EHs with other functional electronics, diversified functional self-sustainable systems are developed, paving the way for the accomplishment of bodyNET. This review introduces the evolution of wearable EHs from a single effect to hybridized mechanisms for multiple energy sources and wearable to implantable self-sustainable systems. Last, we provide our perspectives on the future development of hybrid EHs to be more competitive with conventional batteries.

Polysaccharides and proteins-based nanogenerator for energy harvesting and sensing: A review

Nanogenerator is a promising energy harvesting device that can scavenge tiny mechanical energy from the surrounding environment, and then convert it into electricity. Natural bio-polymers are the potential candidates for the design of nanogenerators due to their excellent characteristics like piezoelectricity, triboelectricity, non-toxicity, biocompatibility and biodegradability. Especially, nanogenerators using bio-sourced polymers as the core raw materials are suitable for wearable and implantable devices. In this review, major advancements in the sensing field of nanogenerators based on natural polysaccharides and proteins (cellulose, chitosan, alginate, agarose, starch, lignin, silk fibroin, collagen, gelatin, keratin, peptide, M13 bacteriophage, β-cyclodextrin, spider silk, etc.) are summarized. Also, challenges in the improvement of electric output performance, flexibility, anti-humidity and energy management for natural polymers based-nanogenerators are proposed. In the future, they will be applied in daily life as an alternative for traditional power source after addressing issues mentioned above.

Hybrid dual-function thermal energy harvesting and storage technologies: towards self-chargeable flexible/wearable devices

The worldwide energy scarcity arising from the massive consumption of nonrenewable energy sources raised a global awareness of the need for cleaner and affordable energy solutions to mitigate climate change and ensure the world sustainable development. The rise of the Internet of Things and the fast growth of the groundbreaking market of wearable electronics boosted a major quest for self-powered technologies merging energy harvesting and energy storage functionalities to meet the demands of a myriad of market segments, such as healthcare, transportation, defense and sports. Thermoelectric devices are a green energy harvesting solution for wearable electronics since they harness the low-grade waste heat from ubiquitous thermal energy sources and convert it into electrical energy. However, these systems generate electrical energy in an intermittent manner, depend on the local heat release availability and require an additional unit to store energy. Flexible and wearable supercapacitors are a safe and eco-friendly energy storage solution to power wearables, offering advantages of security, longer cycle life, higher power density and faster charging over batteries. However, an additional unit that generates energy or that is able to charge the storage device is required. More recently, a new class of all-in-one thermally-chargeable supercapacitors blossomed to meet the requirements of the next generation of autonomous wearable electronics and ensure an endurable energy supply. This self-chargeable hybrid technology combines the functionalities of thermal energy harvesting and supercapacitive energy storage in a single multitasking device. In this Perspective, the advances in the burgeoning field of all-in-one thermally-chargeable supercapacitors for flexible/wearable applications will be critically examined, ranging from their structure and working principle to the rational design of the composing materials and of tailor-made architectures. It will start by introducing the foundations of single flexible/wearable thermoelectric generators and supercapacitors and will evolve into the pioneering venture of fully-integrated thermal energy harvesting/storage systems. It will end by highlighting the current bottlenecks and future pathways for advancing the development of this sophisticated smart technology.

Flexible/Stretchable Supercapacitors with Novel Functionality for Wearable Electronics

With the miniaturization of personal wearable electronics, considerable effort has been expended to develop high-performance flexible/stretchable energy storage devices for powering integrated active devices. Supercapacitors can fulfill this role owing to their simple structures, high power density, and cyclic stability. Moreover, a high electrochemical performance can be achieved with flexible/stretchable supercapacitors, whose applications can be expanded through the introduction of additional novel functionalities. Here, recent advances in and future prospects for flexible/stretchable supercapacitors with innate functionalities are covered, including biodegradability, self-healing, shape memory, energy harvesting, and electrochromic and temperature tolerance, which can contribute to reducing e-waste, ensuring device integrity and performance, enabling device self-charging following exposure to surrounding stimuli, displaying the charge status, and maintaining the performance under a wide range of temperatures. Finally, the challenges and perspectives of high-performance all-in-one wearable systems with integrated functional supercapacitors for future practical application are discussed.

Self-charging power system for distributed energy: beyond the energy storage unit

Power devices for the smart sensor networks of Internet of things (IoT) are required with minimum or even no maintenance due to their enormous quantities and widespread distribution. Self-charging power systems (SCPSs) refer to integrated energy devices with simultaneous energy harvesting, power management and effective energy storage capabilities, which may need no extra battery recharging and can sustainably drive sensors. Herein, we focus on the progress made in the field of nanogenerator-based SCPSs, which harvest mechanical energy using the Maxwell displacement current arising from the variation in the surface-polarized-charge-induced electrical field. Prototypes of different nanogenerator-based SCPSs will be overviewed. Finally, challenges and prospects in this field will be discussed.

Flexible Quasi-Solid-State Sodium Battery for Storing Pulse Electricity Harvested from Triboelectric Nanogenerators

In order to satisfy the increasing requirements on operation time of wearable and portable electronic devices, novel self-powered systems by integrating triboelectric nanogenerator (TENG) with an energy storage device have emerged as a promising technology to provide sustainable power. Here, a flexible sodium composite anode (Na@CC) was prepared by infusing the molten sodium into flexible sodiophilic carbon cloth. The symmetric cell with the Na@CC anode shows stable sodium plating and stripping for 400 h. The full cell with a flexible quasi-solid-state electrolyte, Na₃V₂(PO₄)₃@C nanofiber cathode, and Na@CC anode delivers an excellent rate capacity of 72.5 mAh g^-1 at 5 C and also exhibits stable cycling performance under different bent degrees. By combining with TENG to form a self-powered system, the flexible quasi-solid-state sodium battery can effectively store the pulse current and shows stable discharging capacity for over 100 cycles. The advanced flexible battery demonstrates its capability as a promising energy storage part in combination with TENGs and shows great potential in powerful flexible self-powered systems.

A flexible triboelectric nanogenerator based on a super-stretchable and self-healable hydrogel as the electrode

Stretchable electronic devices nowadays have become more and more necessary in our daily lives, and most of the present electronic devices are based on inorganic materials. The obtained electronic devices can hardly bear various deformations in practical applications because of the poor flexibility and stretchability of these conventional inorganic materials. However, the biggest challenge for producing flexible and stretchable electronic devices is that each component of the device should endure deformations, and in the meantime, ensure that the whole electronic devices not only have excellent flexibility and stretchability, but also maintain excellent electrical output performances even under the situation of being deformed. In this work, a kind of super-stretchable, self-healable, and conductive hydrogel which could bear about sixty times stretching compared with its original state (∼ 6000%) is prepared; it could self-heal in about 10 min after being cut. More importantly, the hydrogel can greatly enhance the output performances of the TENG compared with the conventional copper foil as the electrode. Furthermore, when used as the electrode in flexible TENGs, relatively stable and excellent electrical output performances could be maintained even after being seriously stretched. Consequently, this study provides an ideal candidate for the electrode material of electric devices.