Research Advances of Amorphous Metal Oxides in Electrochemical Energy Storage and Conversion

Partially amorphous NiFe layered double hydroxides enabling highly-efficiency oxygen evolution reaction at high current density

Layered double hydroxide (LDH) serves as an innovative catalyst for water electrolysis, showcasing outstanding performance in the oxygen evolution reaction (OER) under alkaline conditions. However, it faces challenges due to its low electrical conductivity and limited accessibility to active sites. In this work, the flexibility advantages of disordered amorphous and ordered crystals in NiFe LDH were combined to improve OER performance and maintain long-term stability. This combination induces a variety of effects, including improving the intrinsic activity, changing the OER mechanism from adsorb evolution mechanism (AEM) to lattice oxygen mechanism (LOM), and promoting the reaction kinetics of the catalyst. Moreover, the porous structure of NiFe LDH can efficiently alleviate the issue of local acidic environment induced by prolonged OER reaction, satisfying the criteria for long-term stability. Therefore, the NiFe-2.0 LDH catalyst only requires an ultralow overpotential of 189 mV at a current density of 10 mA cm-2 with Tafel slope of 43 mV dec-1. More importantly, the catalyst not only displays excellent electrocatalytic activity with an overpotential of 289 mV but also represents an outstanding stability over 80 h at an ultra-high current density of 1 A cm-2. This study provides a promising strategy for optimizing the catalytic activity and stability of catalyst at ampere current density, which is expected to achieve commercial applications.

Ultrafast Na-Ion Storage in Amorphization Engineered Hollow Vanadium Oxide/MXene Nanohybrids for High-Performance Sodium-Ion Hybrid Capacitors

Sodium ion hybrid capacitors (SIHCs) address the high power and energy requirements in energy storage devices but face significant challenges arising from the slow kinetics and cycling instability of the anode side. Introducing atomic disorder and employing structural engineering in anode materials proves to be effective strategies for achieving rapid charge storage. Here, it is demonstrated that N-doped MXene encapsulated amorphous vanadium oxide hollow spheres (VOx@N-MXene HSs) offer multidirectional open pathways and sufficient vacancies, enabling reversible and fast Na+ insertion/extraction. Machine learning potentials, coupled with molecular simulation techniques, confirm the presence of more abundant pores within the amorphous vanadium oxide (VOx) structure. The simulation of the charging/discharging process elucidates the authentic reaction path and structural evolutions of the VOx@N-MXene HSs, providing sufficient insight into the atomic-scale mechanisms associated with these structural superiorities. The full SIHCs devices demonstrate a high energy density of 198.3 Wh kg-1, along with a long-term cycling lifespan of 8000 cycles. This study offers valuable strategies into the intricate design and exploration of amorphous electrodes, contributing to the advancement of next-generation electrochemical energy devices.

Unveiling the potential of amorphous nanocatalysts in membrane-based hydrogen production

Hydrogen, as a clean and renewable energy source, is a promising candidate to replace fossil fuels and alleviate the environmental crisis. Compared with the traditional H-type cells with a finite-gap, the design of membrane electrodes can reduce the gas transmission resistance, enhance the current density, and improve the efficiency of hydrogen production. However, the harsh environment in the electrolyser makes the membrane electrode based water electrolysis technology still limited by the lack of catalyst activity and stability under the working conditions. Due to the abundant active sites and structural flexibility, amorphous nanocatalysts are alternatives. In this paper, we review the recent research progress of amorphous nanomaterials as electrocatalysts for hydrogen production by electrolysis at membrane electrodes, illustrate and discuss their structural advantages in membrane electrode catalytic systems, as well as explore the significance of the amorphous structure for the development of membrane electrode systems. Finally, the article also looks at future opportunities and adaptations of amorphous catalysts for hydrogen production at membrane electrodes. The authors hope that this review will deepen the understanding of the potential of amorphous nanomaterials for application in electrochemical hydrogen production, facilitating future nanomaterials research and new sustainable pathways for hydrogen production.

Electrochemically Assisted Single Crystal Growth of Reduced Preyssler Polyoxometalates Decorated with M2+ (M = Co, Ni) and Cubane-Like Ni4O4 Units

Polyoxometalates (POMs) are of great interest to the scientific community, and their reduction and nucleation have been well-established by multi-step techniques. The present study develops an electrochemical approach for simultaneous reduction and nucleation of polyoxometalate-containing solids. Herein we report crystal growth of reduced Preyssler polyoxotungstate-based (anionic formula [NaP5W30O110]14-) new crystalline solids made of Preyssler anions interlinked by Co2+ and Ni2+ ions. Crystal nucleation and in situ reduction were achieved at room temperature using a two silver wire electrode setup in various aqueous solutions under constant applied potentials. The POM material was deposited on the cathode, and its structure was characterized by X-ray diffraction techniques. The primary structure type observed involves POMs decorated by disordered Co2+/Ni2+ octahedra and fused into 1-D pillars by additional Co2+/Ni2+ octahedra. A secondary phase was observed in the Ni-based reactions, where reduced Preyssler anions are decorated by Ni4O4 cubane-like units. To understand the electrochemical process, polarization curves of the electrolyte solutions are presented, suggesting an applied potential best suited for crystal growth. The work highlights the effectiveness of an electrochemical pathway where nucleation and simultaneous reduction of POMs can make novel reduced POM solids.

Tubular-like Nanocomposites with Embedded Cu9S5-MoSx Crystalline-Amorphous Heterostructure in N-Doped Carbon as Li-Ion Batteries Anode toward Ultralong Cycling Stability

Transition metal sulfides (TMSs) show the potential to be competitive candidates as next-generation anode materials for Li-ion batteries (LIBs) due to their high theoretical specific capacity. However, sluggish ionic/electronic transportation and huge volume change upon lithiation/delithiation remain major challenges in developing practical TMS anodes. We rationally combine structural design and interface engineering to fabricate a tubular-like nanocomposite with embedded crystalline Cu9S5 nanoparticles and amorphous MoSx in a carbon matrix (C/Cu9S5-MoSx NTs). On the one hand, the hybrid integrated the advantages of 1D hollow nanostructures and carbonaceous materials, whose high surface-to-volume ratios, inner void, flexibility, and high electronic conductivity not only enhance ion/electron transfer kinetics but also effectively buffer the volume changes of metal sulfides during charge/discharge. On the other hand, the formation of crystalline-amorphous heterostructures between Cu9S5 and MoSx could further boost charge transfer due to an induced built-in electric field at the interface and the presence of a long-range disorder phase. In addition, amorphous MoSx offers an extra elastic buffer layer to release the fracture risk of Cu9S5 crystalline nanoparticles during repetitive electrochemical reactions. Benefiting from the above synergistic effect, the C/Cu9S5-MoSx electrode as an LIB anode in an ether-based electrolyte achieves a high-rate capability (445 mAh g-1 at 6 A g-1) and superior ultralong-term cycling stability, which delivers an initial discharge capacity of 561 mAh g-1 at 2 A g-1 and its retention capacity after 3600 cycles (376 mAh g-1) remains higher than that of commercial graphite (372 mAh g-1).

Amorphous Anode Materials for Fast-charging Lithium-ion Batteries

Fast-charging technology is set to revolutionize the field of lithium-ion batteries (LIBs), driving the creation of next-generation devices with the ability to get charged within a short span of time. From the anode perspective, it is of paramount importance to design materials that can withstand continuous Li+ insertion/deinsertion at high charging rates and still remain unaffected by factors such as mechanical fractures, electrolyte side reactions, polarisation, lithium plating and heat generation. Herein, the recent advancements in the design of amorphous materials as anodes for fast-charging LIBs have been discussed. While the development of this particular class of materials for application in high-rate anodes has been paid limited attention in recent literature, it holds immense promise for improving the fast-charging capabilities. This concept summarizes the recent strides made in this emerging field, outlining the strategies employed in the design of amorphous anodes and emphasizing the crucial role played by the amorphous nature in achieving fast-charging performance. Further, the successive initiatives that can be undertaken to drive the progress of amorphous materials for fast charging LIBs have also been detailed, which could potentially improve their commercial viability.

In Situ Flash Synthesis of Ultra-High-Performance Metal Oxide Anode through Shunting Current-Based Electrothermal Shock

The synthesis of anode materials plays an important role in determining the production efficiency, cost, and performance of lithium-ion batteries (LIBs). However, a low-cost, high-speed, scalable manufacturing process of the anode with the desired structural feature for practical technology adoption remains elusive. In this study, we propose a novel method called in situ flash shunt-electrothermal shock (SETS) which is controllable, fast, and energy-saving for synthesizing metal oxide-based materials. By using the example of direct electrothermal decomposition of ZIF-67 precursor loaded onto copper foil support, we achieve rapid (0.1-0.3 s) pyrolysis and generate porous hollow cubic structure material consisting of carbon-coated ultrasmall (10-15 nm) subcrystalline CoO/Co nanoparticles with controllable morphology. It was shown that CoO/Co@N-C exhibits prominent electrochemical performance with a high reversible capacity up to 1503.7 mA h g-1 after 150 cycles at 0.2 A g-1and stable capacities up to 434.1 mA h g-1 after 400 cycles at a high current density of 6 A g-1. This fabrication technique integrates the synthesis of active materials and the formation of electrode sheets into one process, thus simplifying the preparation of electrodes. Due to the simplicity and scalability of this process, it can be envisaged to apply it to the synthesis of metal oxide-based materials and to achieve large-scale production in a nanomanufacturing process.

Amorphous Materials for Lithium-Ion and Post-Lithium-Ion Batteries

Lithium-ion and post-lithium-ion batteries are important components for building sustainable energy systems. They usually consist of a cathode, an anode, an electrolyte, and a separator. Recently, the use of solid-state materials as electrolytes has received extensive attention. The solid-state electrolyte materials (as well as the electrode materials) have traditionally been overwhelmingly crystalline materials, but amorphous (disordered) materials are gradually emerging as important alternatives because they can increase the number of ion storage sites and diffusion channels, enhance solid-state ion diffusion, tolerate more severe volume changes, and improve reaction activity. To develop superior amorphous battery materials, researchers have conducted a variety of experiments and theoretical simulations. This review highlights the recent advances in using amorphous materials (AMs) for fabricating lithium-ion and post-lithium-ion batteries, focusing on the correlation between material structure and properties (e.g., electrochemical, mechanical, chemical, and thermal ones).  We  review both the conventional and the emerging characterization methods for analyzing AMs and present the roles of disorder in influencing the performances of various batteries such as those based on lithium, sodium, potassium, and zinc. Finally,  we  describe the challenges and perspectives for commercializing rechargeable AMs-based batteries.

Telluride-Based Materials: A Promising Route for High Performance Supercapacitors

As supercapacitor (SC) technology continues to evolve, there is a growing need for electrode materials with high energy/power densities and cycling stability. However, research and development of electrode materials with such characteristics is essential for commercialization the SC. To meet this demand, the development of superior electrode materials has become an increasingly critical step. The electrochemical performance of SCs is greatly influenced by various factors such as the reaction mechanism, crystal structure, and kinetics of electron/ion transfer in the electrodes, which have been challenging to address using previously investigated electrode materials like carbon and metal oxides/sulfides. Recently, tellurium and telluride-based materials have garnered increasing interest in energy storage technology owing to their high electronic conductivity, favorable crystal structure, and excellent volumetric capacity. This review provides a comprehensive understanding of the fundamental properties and energy storage performance of tellurium- and Te-based materials by introducing their physicochemical properties. First, we elaborate on the significance of tellurides. Next, the charge storage mechanism of functional telluride materials and important synthesis strategies are summarized. Then, research advancements in metal and carbon-based telluride materials, as well as the effectiveness of tellurides for SCs, were analyzed by emphasizing their essential properties and extensive advantages. Finally, the remaining challenges and prospects for improving the telluride-based supercapacitive performance are outlined.

Conformal Coverage of ZnO Nanowire Arrays by ZnMnO3 : Room-temperature Photodeposition from Aqueous Solution

Compositionally and structurally complex semiconductor oxide nanostructures gain importance in many energy-related applications. Simple and robust synthesis routes ideally complying with the principles of modern green chemistry are therefore urgently needed. Here we report on the one-step, room-temperature synthesis of a crystalline-amorphous biphasic ternary metal oxide at the ZnO surface using aqueous precursor solutions. More specifically, conformal and porous ZnMnO3 shells are photodeposited from KMnO4 solution onto immobilized ZnO nanowires acting not only as the substrate but also as the Zn precursor. This water-based, low temperature process yields ZnMnO3 /ZnO composite electrodes featuring in 1 M Na2 SO4 aqueous solution capacitance values of 80-160 F g-1 (as referred to the total mass of the porous film i. e. the electroactive ZnMnO3 phase and the ZnO nanowire array). Our results highlight the suitability of photodeposition as a simple and green route towards complex functional materials.

Boosting Oxygen Evolution Reaction of (Fe,Ni)OOH via Defect Engineering for Anion Exchange Membrane Water Electrolysis Under Industrial Conditions

Developing non-precious catalysts with long-term catalytic durability and structural stability under industrial conditions is the key to practical alkaline anion exchange membrane (AEM) water electrolysis. Here, an energy-saving approach is proposed to synthesize defect-rich iron nickel oxyhydroxide for stability and efficiency toward the oxygen evolution reaction. Benefiting from in situ cation exchange, the nanosheet-nanoflake-structured catalyst is homogeneously embedded in, and tightly bonded to, its substrate, making it ultrastable at high current densities. Experimental and theoretical calculation results reveal that the introduction of Ni in FeOOH reduces the activation energy barrier for the catalytic reaction and that the purposely created oxygen defects not only ensure the exposure of active sites and maximize the effective catalyst surface but also modulate the local coordination environment and chemisorption properties of both Fe and Ni sites, thus lowering the energy barrier from *O to *OOH. Consequently, the optimized d-(Fe,Ni)OOH catalyst exhibits outstanding catalytic activity with long-term durability under both laboratory and industrial conditions. The large-area d-(Fe,Ni)OOH||NiMoN pair requires 1.795 V to reach a current density of 500 mA cm-2 at an absolute current of 12.5 A in an AEM electrolyzer for overall water electrolysis, showing great potential for industrial water electrolysis.

Brookite TiO2 Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows

Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO2 ) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO2 NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO2 NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm2  C-1 at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li+ ion intercalation.

Amorphous Ni-Mo-B-O Bifunctional Electrocatalyst for Simultaneous Production of Hydrogen and Value-added Chemicals

Hydrogen evolution reaction (HER) coupled with biomass conversion is a sustainable route to produce clean energy H2 and value-added chemicals simultaneously. Herein, an amorphous Ni-Mo-B-O bifunctional electrocatalyst was synthesized through a facile electrodeposition method and employed as a cathode for HER to produce H2 and as an anode for the conversion of hydroxymethylfurfural (HMF) to furandicarboxylic acid (FDCA). Besides leading to the formation of amorphous structures, the introduction of Mo and B can increase the electron density and optimize the electronic structure of the electrocatalyst, thus substantially increasing the catalytic activity of the catalyst. After continuous reaction at a constant potential of 0.58 V vs. Hg/HgO for 8 hours, the conversion of HMF reached 98.86 %, and the selectivity of the target product FDCA was as high as 92.97 %. Finally, a two-electrolyzer system was constructed using the amorphous Ni-Mo-B-O as both cathode and anode to achieve simultaneous H2 production in the cathode chamber and FDCA production in the anode chamber at a low voltage. This work presents a promising strategy for the design and synthesis of high-performance non-noble metal electrocatalysts for efficient and cost-effective H2 production.

Constructing Highly Active Metal Oxides for Toluene Degradation by Fenton Iron Mud Modulation

Fenton iron mud (IM) is a hazardous solid waste produced by Fenton oxidation technology after treating industrial wastewater. Thus, it is necessary and challenging to develop a recycling technology to back-convert dangerous materials into useful products. Herein, we develop a sustainable approach to prepare highly active metal oxides via a solid-state grinding method. IM, as an amorphous material, can disperse and interact well with these supported metal oxides, boosting toluene degradation significantly. Among these IM-based catalysts, the catalyst 8% MnO_x/IM-0.2VC exhibits the best performance (T₁₀₀ = 290 °C), originating from the oxide-support interaction and optimal balance between low-temperature reducibility and oxygen vacancy concentration. In addition, in situ diffuse reflectance infrared Fourier transform spectrometry (DRIFTS) results expound that ring breakage is prone to occur on MnO_x, and oxygen vacancies are beneficial to adsorb oxygen and activate oxygen species to boost toluene oxidation following the Mars-van Krevelen mechanism. This work advances a complete industrial hazardous waste recycling route to develop extremely active catalysts.

Biomimetic Construction of Ferrite Quantum Dot/Graphene Heterostructure for Enhancing Ion/Charge Transfer in Supercapacitors

Spinel ferrites are regarded as promising electrode materials for supercapacitors (SCs) in virtue of their low cost and high theoretical specific capacitances. However, bulk ferrites suffer from limited electrical conductivity, sluggish ion transport, and inadequate active sites. Therefore, rational structural design and composition regulation of the ferrites are approaches to overcome these limitations. Herein, a general biomimetic mineralization synthetic strategy is proposed to synthesize ferrite (XFe₂ O₄ , X = Ni, Co, Mn) quantum dot/graphene (QD/G) heterostructures. Anchoring ferrite QD on the graphene sheets not only strengthens the structural stability, but also forms the electrical conductivity network needed to boost the ion diffusion and charge transfer. The optimized NiFe₂ O₄ QD/G heterostructure exhibits specific capacitances of 697.5 F g^-1 at 1 A g^-1 , and exceptional cycling performance. Furthermore, the fabricated symmetrical SCs deliver energy densities of 24.4 and 17.4 Wh kg^-1 at power densities of 499.3 and 4304.2 W kg^-1 , respectively. Density functional theory calculations indicate the combination of NiFe₂ O₄ QD and graphene facilitates the adsorption of potassium atoms, ensuring rapid ion/charge transfer. This work enriches the application of the biomimetic mineralization synthesis and provides effective strategies for boosting ion/charge transfer, which may offer a new way to develop advanced electrodes for SCs.

Ce Site in Amorphous Iron Oxyhydroxide Nanosheet toward Enhanced Electrochemical Water Oxidation

Iron oxyhydroxide has been considered an auspicious electrocatalyst for the oxygen evolution reaction (OER) in alkaline water electrolysis due to its suitable electronic structure and abundant reserves. However, Fe-based materials seriously suffer from the tradeoff between activity and stability at a high current density above 100 mA cm^-2 . In this work, the Ce atom is introduced into the amorphous iron oxyhydroxide (i.e., CeFeO_x H_y ) nanosheet to simultaneously improve the intrinsic electrocatalytic activity and stability for OER through regulating the redox property of iron oxyhydroxide. In particular, the Ce substitution leads to the distorted octahedral crystal structure of CeFeO_x H_y , along with a regulated coordination site. The CeFeO_x H_y electrode exhibits a low overpotential of 250 mV at 100 mA cm^-2 with a small Tafel slope of 35.1 mVdec^-1 . Moreover, the CeFeO_x H_y electrode can continuously work for 300 h at 100 mA cm^-2 . When applying the CeFeO_x H_y nanosheet electrode as the anode and coupling it with the platinum mesh cathode, the cell voltage for overall water splitting can be lowered to 1.47 V at 10 mA cm^-2 . This work offers a design strategy for highly active, low-cost, and durable material through interfacing high valent metals with earth-abundant oxides/hydroxides.

Vanadium Oxides with Amorphous-Crystalline Heterointerface Network for Aqueous Zinc-Ion Batteries

Rechargeable aqueous Zn-VO_x batteries are attracting attention in large scale energy storage applications. Yet, the sluggish Zn²⁺ diffusion kinetics and ambiguous structure-property relationship are always challenging to fulfil the great potential of the batteries. Here we electrodeposit vanadium oxide nanobelts (VO-E) with highly disordered structure. The electrode achieves high capacities (e.g., ≈5 mAh cm^-2 , 516 mAh g^-1 ), good rate and cycling performances. Detailed structure analysis indicates VO-E is composed of integrated amorphous-crystalline nanoscale domains, forming an efficient heterointerface network in the bulk electrode, which accounts for the good electrochemical properties. Theoretical calculations indicate that the amorphous-crystalline heterostructure exhibits the favorable cation adsorption and lower ion diffusion energy barriers compared to the amorphous and crystalline counterparts, thus accelerating charge carrier mobility and electrochemical activity of the electrode.

Research Advances in Amorphous-Crystalline Heterostructures Toward Efficient Electrochemical Applications

Interface engineering of heterostructures has proven a promising strategy to effectively modulate their physicochemical properties and further improve the electrochemical performance for various applications. In this context related research of the newly proposed amorphous-crystalline heterostructures have lately surged since they combine the superior advantages of amorphous- and crystalline-phase structures, showing unusual atomic arrangements in heterointerfaces. Nonetheless, there has been much less efforts in systematic analysis and summary of the amorphous-crystalline heterostructures to examine their complicated interfacial interactions and elusory active sites. The critical structure-activity correlation and electrocatalytic mechanism remain rather elusive. In this review, the recent advances of amorphous-crystalline heterostructures in electrochemical energy conversion and storage fields are amply discussed and presented, along with remarks on the challenges and perspectives. Initially, the fundamental characteristics of amorphous-crystalline heterostructures are introduced to provide scientific viewpoints for structural understanding. Subsequently, the superiorities and current achievements of amorphous-crystalline heterostructures as highly efficient electrocatalysts/electrodes for hydrogen evolution reaction, oxygen evolution reaction, supercapacitor, lithium-ion battery, and lithium-sulfur battery applications are elaborated. At the end of this review, future outlooks and opportunities on amorphous-crystalline heterostructures are also put forward to promote their further development and application in the field of clean energy.

The versatile family of molybdenum oxides: synthesis, properties, and recent applications

The family of molybdenum oxides has numerous advantages that make them strong candidates for high-value research and various commercial applications. The variation of their multiple oxidation states allows their existence in a wide range of compositions and morphologies that converts them into highly versatile and tunable materials for incorporation into energy, electronics, optical, and biological systems. In this review, a survey is presented of the most general properties of molybdenum oxides including the crystalline structures and the physical properties, with emphasis on present issues and challenging scientific and technological aspects. A section is devoted to the thermodynamical properties and the most common preparation techniques. Then, recent applications are described, including photodetectors, thermoelectric devices, solar cells, photo-thermal therapies, gas sensors, and energy storage.

Modelling amorphous materials via a joint solid-state NMR and X-ray absorption spectroscopy and DFT approach: application to alumina

Understanding a material's electronic structure is crucial to the development of many functional devices from semiconductors to solar cells and Li-ion batteries. A material's properties, including electronic structure, are dependent on the arrangement of its atoms. However, structure determination (the process of uncovering the atomic arrangement), is impeded, both experimentally and computationally, by disorder. The lack of a verifiable atomic model presents a huge challenge when designing functional amorphous materials. Such materials may be characterised through their local atomic environments using, for example, solid-state NMR and XAS. By using these two spectroscopy methods to inform the sampling of configurations from ab initio molecular dynamics we devise and validate an amorphous model, choosing amorphous alumina to illustrate the approach due to its wide range of technological uses. Our model predicts two distinct geometric environments of AlO₅ coordination polyhedra and determines the origin of the pre-edge features in the Al K-edge XAS. From our model we construct an average electronic density of states for amorphous alumina, and identify localized states at the conduction band minimum (CBM). We show that the presence of a pre-edge peak in the XAS is a result of transitions from the Al 1s to Al 3s states at the CBM. Deconvoluting this XAS by coordination geometry reveals contributions from both AlO₄ and AlO₅ geometries at the CBM give rise to the pre-edge, which provides insight into the role of AlO₅ in the electronic structure of alumina. This work represents an important advance within the field of solid-state amorphous modelling, providing a method for developing amorphous models through the comparison of experimental and computationally derived spectra, which may then be used to determine the electronic structure of amorphous materials.

An Amorphous Anode for Proton Battery

Developing advanced electrode materials is crucial for improving the electrochemical performances of proton batteries. Currently, the anodes are primarily crystalline materials which suffer from inferior cyclic stability and high electrode potential. Herein, we propose amorphous electrode materials for proton batteries by using a general ion-exchange protocol to introduce multivalent metal cations for activating the host material. Taking Al3+ as an example, theoretical and experimental analysis demonstrates electrostatic interaction between metal cations and lattice oxygen, which is the primary barrier for direct introduction of the multivalent cations, is effectively weakened through ion exchange between Al3+ and pre-intercalated K+. The as-prepared Al-MoOx anode therefore delivered a remarkable capacity and outstanding cycling stability that outperforms most of the state-of-the-art counterparts. The assembled full cell also achieved a high voltage of 1.37 V. This work opens up new opportunities for developing high-performance electrodes of proton batteries by introducing amorphous materials.

High-Performance Aqueous Zinc-Ion Batteries Enabled by Binder-Free and Ultrathin V2O5-x@Graphene Aerogels with Intercalation Pseudocapacitance

As a result of the absence of solid-state diffusion limitation, intercalation pseudocapacitance behavior is emerging as an attractive charge-storage mechanism that can greatly facilitate the ion kinetics to boost the rate capability and cycle stability of batteries; however, related research in the field of zinc-ion batteries (ZIBs) is still in the initial stage and only found in limited cathode materials. In this study, a novel V₂O_5-x@rGO hybrid aerogel consisting of ultrathin V₂O₅ nanosheets (∼1.26 nm) with abundant oxygen vacancies (Vö) and a three-dimensional (3D) graphene conductive network was specifically designed and used as a freestanding and binder-free electrode for ZIBs. As expected, the ideal microstructure of both the material and the electrode enable fast electron/ion diffusion kinetics of the electrode, which realize a typical intercalation pseudocapacitance behavior as demonstrated by the simulation calculation of cyclic voltammetry (CV), ex situ X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and first-principles density functional theory (DFT) calculation. Thanks to the elimination of solid-state diffusion limitation, the V₂O_5-x@rGO electrode delivers a high reversible rate capacity of 153.9 mAh g^-1 at 15 A g^-1 and 90.6% initial capacity retention at 0.5 A g^-1 after 1050 cycles in ZIBs. The intercalation pseudocapacitance behavior is also realized in the assembled soft-pack battery, showing promising practical application prospects.

Defect-Induced Dense Amorphous/Crystalline Heterophase Enables High-Rate and Ultrastable Sodium Storage

Currently, the construction of amorphous/crystalline (A/C) heterophase has become an advanced strategy to modulate electronic and/or ionic behaviors and promote structural stability due to their concerted advantages. However, their different kinetics limit the synergistic effect. Further, their interaction functions and underlying mechanisms remain unclear. Here, a unique engineered defect-rich V2 O3 heterophase structure (donated as A/C-V2 O3- x @C-HMCS) composed of mesoporous oxygen-deficient amorphous - hollow core (A-V2 O3- x /HMC) and lattice-distorted crystalline shell (C-V2 O3 /S) encapsulated by carbon is rationally designed via a facile approach. Comprehensive density functional theory (DFT) calculations disclose that the lattice distortion enlarges the porous channels for Na+ diffusion in the crystalline phase, thereby optimizing its kinetics to be compatible with the oxygen-vacancy-rich amorphous phase. This significantly reduces the high contrast of the kinetic properties between the crystalline and amorphous phases in A/C-V2 O3- x @C-HMCS and induces the formation of highly dense A/C interfaces with a strong synergistic effect. As a result, the dense heterointerface effectively optimizes the Na+ adsorption energy and lowers the diffusion barrier, thus accelerating the overall kinetics of A/C-V2 O3- x @C-HMCS. In contrast, the perfect heterophase (defects-free) A/C-V2 O3 @C-HCS demonstrates sparse A/C interfacial sites with limited synergistic effect and sluggish kinetics. As expected, the A/C-V2 O3- x @C-HMCS achieves a high rate and ultrastable performance (192 mAh g-1 over 6000 cycles at 10 A g-1 ) when employed for the first time as a cathode for sodium-ion batteries (SIBs). This work provides general guidance for realizing dense heterophase cathode design for high-performance SIBs and beyond.

Engineering Amorphous/Crystalline Structure of Manganese Oxide for Superior Oxygen Catalytic Performance in Rechargeable Zinc-Air Batteries

Although amorphous materials are popular in oxygen electrocatalysis, their performance requires further improvement to meet the need for rechargeable zinc-air batteries. In this work, an amorphous/crystalline layered manganese oxide (ACMO) was designed, and its unique amorphous/crystalline homogeneous structure activated its oxygen reduction activity with a positive half-wave potential of 0.81 V and oxygen evolution activity with a moderate overpotential of 407 mV at 10 mA cm^-2 . Moreover, the amorphous/crystalline structure endowed ACMO with excellent stability. While employed as the air-electrode material for rechargeable zinc-air batteries, ACMO overcame the poor cycling stability of manganese oxide and cycled stably for 1000 cycles (≈17 days) at 10 mA cm^-2 . Besides, it delivered a high power density of 159.7 mW cm^-2 and a narrow voltage gap of 0.66 V. This work gives an insight into designing oxide materials with amorphous/crystalline structure and feasible guidance for harmonizing electrochemical activity and stability.

Local Disordering in the Amorphous Network of a Solution-Processed Indium Tin Oxide Thin Film

The polyhedra unit structure (MO_x) in an amorphous metal oxide network has more freedom and flexibility than the same unit structure in a crystalline phase. Consequently, a mild external stimulus (e.g., instant photonic and acoustic energy) could affect and change this network parameter, thereby enhancing and modulating the electrical properties. However, it is difficult to tune these atomic parameters solely while maintaining the metal oxide's initial global amorphous phase and thereby preventing mechanical instability at the film-substrate interface (i.e., cracking or distortion). Here, we report local disordering in an amorphous network of a solution-processable indium tin oxide (ITO) film, where the disordering is triggered by mild-light irradiation (<0.1 mJ/cm²). Through a combination of systematic characterizations of the global structural and chemical compositional changes in conjunction with extended X-ray absorption fine structure analyses, we revealed the distortion of the atomic structure in the amorphous network of the ITO film led to the formation of additional structural oxygen vacancies. Our findings enabled us to fabricate mechanical-instability-free, perfect amorphous-phase ITO thin films on plastic substrates, where the sheet resistance substantially decreased to ∼ 2 × 10³ Ω/□. Furthermore, this sheet resistance did not vary when the film and substrate were bent to a radius of 2 mm and could operate at low temperatures. This work can pave the novel way to fabricate high-quality flexible transparent electrodes suitable for rapid, cost-effective, and patternable processing on plastic substrates, and the domain can be extended to flexible electronics.

Efficient Alkaline Water/Seawater Hydrogen Evolution by a Nanorod-Nanoparticle-Structured Ni-MoN Catalyst with Fast Water-Dissociation Kinetics

Achieving efficient and durable nonprecious hydrogen evolution reaction (HER) catalysts for scaling up alkaline water/seawater electrolysis is desirable but remains a significant challenge. Here, a heterogeneous Ni-MoN catalyst consisting of Ni and MoN nanoparticles on amorphous MoN nanorods that can sustain large-current-density HER with outstanding performance is demonstrated. The hierarchical nanorod-nanoparticle structure, along with a large surface area and multidimensional boundaries/defects endows the catalyst with abundant active sites. The hydrophilic surface helps to achieve accelerated gas-release capabilities and is effective in preventing catalyst degradation during water electrolysis. Theoretical calculations further prove that the combination of Ni and MoN effectively modulates the electron redistribution at their interface and promotes the sluggish water-dissociation kinetics at the Mo sites. Consequently, this Ni-MoN catalyst requires low overpotentials of 61 and 136 mV to drive current densities of 100 and 1000 mA cm^-2 , respectively, in 1 m KOH and remains stable during operation for 200 h at a constant current density of 100 or 500 mA cm^-2 . This good HER catalyst also works well in alkaline seawater electrolyte and shows outstanding performance toward overall seawater electrolysis with ultralow cell voltages.

Highly Active and Selective Electroreduction of N2 by the Catalysis of Ga Single Atoms Stabilized on Amorphous TiO2 Nanofibers

The electroreduction of N₂ under ambient conditions has emerged as one of the most promising technologies in chemistry, since it is a greener way to make NH₃ than the traditional Haber-Bosch process. However, it is greatly challenged with a low NH₃ yield and faradaic efficiency (FE) because of the lack of highly active and selective catalysts. Inherently, transition (d-block) metals suffer from inferior selectivity due to fierce competition from H₂ evolution, while post-transition (p-block) metals exhibit poor activity due to insufficient "π back-donation" behavior. Considering their distinct yet complementary electronic structures, here we propose a strategy to tackle the activity and selectivity challenge through the atomic dispersion of p-block metal on an all-amorphous transition-metal matrix. To address the activity issue, lotus-root-like amorphous TiO₂ nanofibers are synthesized which, different from vacancy-engineered TiO₂ nanocrystals reported previously, possess abundant intrinsic oxygen vacancies (V_O) together with under-coordinated dangling bonds in nature, resulting in significantly enhanced N₂ activation and electron transport capacity. To address the selectivity issue, well-isolated single atoms (SAs) of Ga are successfully synthesized through the confinement effect of V_O, resulting in Ga-V_O reactive sites with the maximum availability. It is revealed by density functional theory calculations that Ga SAs are favorable for the selective adsorption of N₂ at the catalyst surface, while V_O can facilitate N₂ activation and reduction subsequently. Benefiting from this coupled activity/selectivity design, high NH₃ yield (24.47 μg h^-1 mg^-1) and FE (48.64%) are achieved at an extremely low overpotential of -0.1 V vs RHE.

In Situ-Grown Heterostructured Co3S4/CNTs/C Nanocomposites with a Bridged Structure for High-Performance Supercapacitors

As one of the most competitive candidates for energy storage devices, supercapacitors have attracted extensive research interest due to their incomparable power density and ultralong cycling stability. However, the large surface area required for charge storage is an irreconcilable contradiction with the requirement of energy density. Therefore, a high energy density is a major challenge for supercapacitors. To solve the contradiction, Co₃S₄/CNTs/C with a bridged structure is designed, where CNTs generated in situ serve as a bridge to connect a porous carbon matrix and a Co₃S₄ nanoparticle, and Co₃S₄ nanoparticles are anchored on the topmost of CNTs. The porous carbon and Co₃S₄ are used for electrochemical double-layer capacitors and pseudocapacitors, respectively. This bridged structure can efficiently utilize the surface of Co₃S₄ nanoparticles to increase the overall energy storage capacity and provide more electrochemically active sites for charge storage and delivery. The materials show an energy density of 41.3 Wh kg^-1 at 691.9 W kg^-1 power density and a retaining energy density of 33.1 Wh kg^-1 at a high power density of 3199.9 W kg^-1 in an asymmetrical supercapacitor. The synthetic technique provides a simple method to obtain heterostructured nanocomposites with a high energy density by maximizing the effect of pseudocapacitor electrode active materials.

Structural Variations of Metal Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Electrocatalytic oxygen evolution reaction (OER), an important electrode reaction in electrocatalytic and photoelectrochemical cells for a carbon-free energy cycle, has attracted considerable attention in the last few years. Metal oxides have been considered as good candidates for electrocatalytic OER because they can be easily synthesized and are relatively stable during the OER process. However, inevitable structural variations still occur to them due to the complex reaction steps and harsh working conditions of OER, thus impending the further insight into the catalytic mechanism and rational design of highly efficient electrocatalysts. The aim of this review is to disclose the current research progress toward the structural variations of metal oxide-based OER electrocatalysts. The origin of structural variations of metal oxides is discussed. Based on some typical oxides performing OER activity, the external and internal factors that influence the structural stability are summarized and then some general approaches to regulate the structural variation process are provided. Some operando methods are also concluded to monitor the structural variation processes and to identify the final active structure. Additionally, the unresolved problems and challenges are presented in an attempt to get further insight into the mechanism of structural variations and establish a rational structure-catalysis relationship.

Probing Multiscale Disorder in Pyrochlore and Related Complex Oxides in the Transmission Electron Microscope: A Review

Transmission electron microscopy (TEM), and its counterpart, scanning TEM (STEM), are powerful materials characterization tools capable of probing crystal structure, composition, charge distribution, electronic structure, and bonding down to the atomic scale. Recent (S)TEM instrumentation developments such as electron beam aberration-correction as well as faster and more efficient signal detection systems have given rise to new and more powerful experimental methods, some of which (e.g., 4D-STEM, spectrum-imaging, in situ/operando (S)TEM)) facilitate the capture of high-dimensional datasets that contain spatially-resolved structural, spectroscopic, time- and/or stimulus-dependent information across the sub-angstrom to several micrometer length scale. Thus, through the variety of analysis methods available in the modern (S)TEM and its continual development towards high-dimensional data capture, it is well-suited to the challenge of characterizing isometric mixed-metal oxides such as pyrochlores, fluorites, and other complex oxides that reside on a continuum of chemical and spatial ordering. In this review, we present a suite of imaging and diffraction (S)TEM techniques that are uniquely suited to probe the many types, length-scales, and degrees of disorder in complex oxides, with a focus on disorder common to pyrochlores, fluorites and the expansive library of intermediate structures they may adopt. The application of these techniques to various complex oxides will be reviewed to demonstrate their capabilities and limitations in resolving the continuum of structural and chemical ordering in these systems.

Fascinating Tin Effects on the Enhanced and Large-Current-Density Water Splitting Performance of Sn-Ni(OH)2

Ni(OH)₂-based materials are widely studied in oxygen evolution reaction (OER), but no related synthesis, electrocatalytic application, or theoretical analysis of Sn⁴⁺-doped Ni(OH)₂ has been reported. In this work, Sn-Ni(OH)₂ with a homogeneously distributed nanosheet array was synthesized through a one-step hydrothermal process. It displays a hugely enhanced catalytic activity compared to undoped Ni(OH)₂ throughout the OER and hydrogen evolution reaction (HER) processes. The overpotentials at 100 mA cm^-2 of Sn-Ni(OH)₂ are 312 mV (OER) and 298 mV (HER), which are lower than the corresponding 396 and 427 mV of Ni(OH)₂, respectively. In addition, Sn-Ni(OH)₂ can deliver stable large current densities (at ≈500 and ≈1000 mA cm^-2) for the long-term (>100 h) chronoamperometry testing. Moreover, Sn-Ni(OH)₂ illustrates catalytic activity comparable to that of a commercial Pt/C||RuO₂ electrode pair during the overall water splitting course. Both experimental phenomena and relevant computed theoretical data confirm that the enhanced water splitting activity is mainly due to the introduced Sn⁴⁺ site, which acts as the active center activates the nearby Ni sites during the OER, while acting as the most active reaction site that participates in the HER. Although the doped Sn⁴⁺ has two different effects on OER and HER proceedings, water splitting performance of Sn-Ni(OH)₂ has been conspicuously improved.

Two-Phase Transition Induced Amorphous Metal Phosphides Enabling Rapid, Reversible Alkali-Metal Ion Storage

Metal phosphides as anode materials for alkali-metal ion batteries have captured considerable interest due to their high theoretical capacities and electronic conductivity. However, they suffer from huge volume expansion and element segregation during repetitive insertion/extraction of guest ions, leading to structure deterioration and rapid capacity decay. Herein, an amorphous Sn_0.5Ge_0.5P₃ was constructed through a two-phase intermediate strategy based on the elemental composition modulation from two crystalline counterparts and applied in alkali-metal ion batteries. Differing from crystalline P-based compounds, the amorphous structure of Sn_0.5Ge_0.5P₃ effectively reduces the volume variation from above 300% to 225% during cycling. The ordered distribution of cations and anions in the short-range ensures the uniform distribution of each element during cycles and thus contributes to durable cycling stability. Moreover, the long-range disordered structure of amorphous material shortens the ion transport distance, which facilitates diffusion kinetics. Benefiting from the aforementioned effects, the amorphous Sn_0.5Ge_0.5P₃ delivers a high Na storage capacity of 1132 mAh g^-1 at 0.1 A g^-1 over 100 cycles. Even at high current densities of 2 and 10 A g^-1, its capacities still reach 666 and 321 mAh g^-1, respectively. As an anode for Li storage, the Sn_0.5Ge_0.5P₃ similarly also exhibits better cycling stability and rate performance compared to its crystalline counterparts. Significantly, the two-phase transition strategy is generally applicable to achieving other amorphous metal phosphides such as GeP₂. This work would be helpful for constructing high-performance amorphous anode materials for alkali-metal ion batteries.

A Highly-Efficient Oxygen Evolution Electrocatalyst Derived from a Metal-Organic Framework and Ketjenblack Carbon Material

The composite of the metal-organic framework (MOF) Ni(Fe)-MOF-74 and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the in-situ MOF synthesis in a one-step solvothermal reaction. The composite material features a remarkable electrochemical oxygen evolution reaction (OER) performance where the overpotential at 10 mA/cm2 and the current density at 1.7 VRHE are recorded as 0.274 VRHE and 650 mA/cm2 , respectively, in 1 mol/L KOH. In particular, the activation of nickel-iron clusters from the MOF under an applied anodic bias steadily boosts the OER performance. Although Ni(Fe)-MOF-74 goes through some structural modification during the electrochemical measurements, the stabilized and optimized composite material shows excellent OER performance. This simple strategy to design highly-efficient electrocatalysts, utilizing readily available precursors and carbon materials, will leverage the use of diverse metal-organic complexes into electrode fabrication with a high energy conversion efficiency.

Synergistic Interface-Assisted Electrode-Electrolyte Coupling Toward Advanced Charge Storage

Owing to the limited charge storage capability of transitional metal oxides in aqueous electrolytes, the use of redox electrolytes (RE) represents a promising strategy to further increase the energy density of aqueous batteries or pseudocapacitors. The usual coupling of an electrode and an RE possesses weak electrode/RE interaction and weak adsorption of redox moieties on the electrode, resulting in a low capacity contribution and fast self-discharge. In this work, Fe(CN)₆ ^4- groups are grafted on the surface of Co₃ O₄ electrode via formation of CoN bonds, creating a synergistic interface between the electrode and the RE. With such an interface, the coupled Co₃ O₄ -RE system exhibits greatly enhanced charge storage from both Co₃ O₄ and RE, delivering a large reversible capacity of ≈1000 mC cm^-2 together with greatly reduced self-discharge. The significantly improved electrochemical activity of Co₃ O₄ can be attributed to the tuned work function via charge injection from Fe(CN)₆ ^4- , while the greatly enhanced adsorption of K₃ Fe(CN)₆ molecules is achieved by the interface induced dipole-dipole interaction on the liquid side. Furthermore, this enhanced electrode-electrolyte coupling is also applicable in the NiO-RE system, demonstrating that the synergistic interface design can be a general strategy to integrate electrode and electrolyte for high-performance energy storage devices.

Achieving Fast and Durable Lithium Storage through Amorphous FeP Nanoparticles Encapsulated in Ultrathin 3D P-Doped Porous Carbon Nanosheets

Conversion-type transition-metal phosphide anode materials with high theoretical capacity usually suffer from low-rate capability and severe capacity decay, which are mainly caused by their inferior electronic conductivities and large volumetric variations together with the poor reversibility of discharge product (Li₃P), impeding their practical applications. Herein, guided by density functional theory calculations, these obstacles are simultaneously mitigated by confining amorphous FeP nanoparticles into ultrathin 3D interconnected P-doped porous carbon nanosheets (denoted as FeP@CNs) via a facile approach, forming an intriguing 3D flake-CNs-like configuration. As an anode for lithium-ion batteries (LIBs), the resulting FeP@CNs electrode not only reaches a high reversible capacity (837 mA h g^-1 after 300 cycles at 0.2 A g^-1) and an exceptional rate capability (403 mA h g^-1 at 16 A g^-1) but also exhibits extraordinary durability (2500 cycles, 563 mA h g^-1 at 4 A g^-1, 98% capacity retention). By combining DFT calculations, in situ transmission electron microscopy, and a suite of ex situ microscopic and spectroscopic techniques, we show that the superior performances of FeP@CNs anode originate from its prominent structural and compositional merits, which render fast electron/ion-transport kinetics and abundant active sites (amorphous FeP nanoparticles and structural defects in P-doped CNs) for charge storage, promote the reversibility of conversion reactions, and buffer the volume variations while preventing pulverization/aggregation of FeP during cycling, thus enabling a high rate and highly durable lithium storage. Furthermore, a full cell composed of the prelithiated FeP@CNs anode and commercial LiFePO₄ cathode exhibits impressive rate performance while maintaining superior cycling stability. This work fundamentally and experimentally presents a facile and effective structural engineering strategy for markedly improving the performance of conversion-type anodes for advanced LIBs.

Free-Standing Crystalline@Amorphous Core-Shell Nanoarrays for Efficient Energy Storage

Structures comprising high capacity active material are highly desirable in the development of advanced electrodes for energy storage devices. However, the structure degradation of such material still remains a challenge. The construction of amorphous and crystalline heterostructure appears to be a novel and effectual strategy to figure out the problem, owing to the distinct properties of the amorphous protective layer. Herein, crystalline-Co₃ O₄ @amorphous-TiO₂ core-shell nanoarrays directly grown on the carbon cloth substrate are rationally designed to construct the free-standing electrode. In the unique structure, the 3D porous nanoarrays provide increased availability of electrochemical active sites, and the array with a unique heterostructure of crystalline Co₃ O₄ core and amorphous TiO₂ shell exhibits intriguing synergistic properties. Besides, the amorphous TiO₂ protective layer shows elastic behavior to mitigate the volume effect of Co₃ O₄ . Benefiting from these structural advantages, the as-prepared free-standing electrode exhibits superior lithium storage properties, including high coulombic efficiency, outstanding cyclic stability, and rate capability. Pouch cells with high flexibility are also fabricated and show remarkable electrochemical performances, holding great potential for flexible electronic devices in the future.

A General Strategy to Glassy M-Te (M = Ru, Rh, Ir) Porous Nanorods for Efficient Electrochemical N2 Fixation

Electrochemical conversion of nitrogen (N₂ ) into value-added ammonia (NH₃ ) is highly desirable yet formidably challenging due to the extreme inertness of the N₂ molecule, which makes the development of a robust electrocatalyst prerequisite. Herein, a new class of bullet-like M-Te (M = Ru, Rh, Ir) glassy porous nanorods (PNRs) is reported as excellent electrocatalysts for N₂ reduction reaction (NRR). The optimized IrTe₄ PNRs present superior activity with the highest NH₃ yield rate (51.1 µg h^-1 mg^-1 _cat. ) and Faraday efficiency (15.3%), as well as long-term stability of up to 20 consecutive cycles, making them among the most active NRR electrocatalysts reported to date. Both the N₂ temperature-programmed desorption and valence band X-ray photoelectron spectroscopy data show that the strong chemical adsorption of N₂ is the key for enhancing the NRR and suppressing the hydrogen evolution reaction of IrTe₄ PNRs. Density functional theory calculations comprehensively identify that the superior adsorption strength of IrTe₄ adsorptions originates from the synergistic collaboration between electron-rich Ir and the highly electroactive surrounding Te atoms. The optimal adsorption of both N₂ and H₂ O in alkaline media guarantees the superior consecutive NRR process. This work opens a new avenue for designing high-performance NRR electrocatalysts based on glassy materials.

Amorphous Intermediate Derivative from ZIF-67 and Its Outstanding Electrocatalytic Activity

Increasing active sites is an effective method to enhance the catalytic activity of catalysts. Amorphous materials have attracted considerable attention in catalysis because of their abundant catalytic active sites. Herein, a series of derivatives is prepared via the low-temperature heat treatment of ZIF-67 hollow sphere at different temperatures. An intermediate product with an amorphous structure is formed during transformation from ZIF-67 to Co₃ O₄ nanocrystallines when ZIF-67 hollow sphere is heat treated at 260 °C for 3 h. The chemical composition of the amorphous derivative is similar to that of ZIF-67, and the carbon and nitrogen contents of the amorphous derivative are obviously higher than those of crystalline samples obtained at 270 °C or higher. As electrocatalysts for the oxygen evolution reaction (OER) and nonenzymatic glucose sensing, the amorphous derivative exhibits significantly better catalytic activity than crystalline Co₃ O₄ samples. The amorphous sample as an OER catalyst has a low overpotential of 352 mV at 10 mA cm^-2 . The amorphous sample as an enzyme-free glucose sensing catalyst can provide a low detection limit of 3.9 × 10^-6 m and a high sensitivity of 1074.22 µA mM^-1 cm^-2 .

Co-Evaporated CuO-Doped In2O3 1D-Nanostructure for Reversible CH4 Detection at Low Temperatures: Structural Phase Change and Properties

In order to improve the sensitivity and to reduce the working temperature of the CH₄ gas sensor, a novel 1D nanostructure of CuO-doped In₂O₃ was synthesized by the co-evaporation of Cu and In granules. The samples were prepared with changing the weight ratio between Cu and In. Morphology, structure, and gas sensing properties of the prepared films were characterized. The planned operating temperatures for the fabricated sensors are 50-200 °C, where the ability to detect CH₄ at low temperatures is rarely reported. For low Cu content, the fabricated sensors based on CuO-doped In₂O₃ showed very good sensing performance at low operating temperatures. The detection of CH₄ at these low temperatures exhibits the potential of the present sensors compared to the reported in the literature. The fabricated sensors showed also good reversibility toward the CH₄ gas. However, the sensor fabricated of CuO-mixed In₂O₃ with a ratio of 1:1 did not show any response toward CH₄. In other words, the mixed-phase of p- and n-type of CuO and In₂O₃ materials with a ratio of 1:1 is not recommended for fabricating sensors for reducing gas, such as CH₄. The gas sensing mechanism was described in terms of the incorporation of Cu in the In₂O₃ matrix and the formation of CuO and In₂O₃ phases.