Retrosynthesis of Tunable Fluorescent Carbon Dots for Precise Long-Term Mitochondrial Tracking

Advances on carbon nanomaterials and their applications in medical diagnosis and drug delivery

Carbon nanomaterials are indispensable due to their unique properties of high electrical conductivity, mechanical strength and thermal stability, which makes them important nanomaterials in biomedical applications and waste management. Limitations of conventional nanomaterials, such as limited surface area, difficulty in fine tuning electrical or thermal properties and poor dispersibility, calls for the development of advanced nanomaterials to overcome such limitations. Commonly, carbon nanomaterials were synthesized by chemical vapor deposition (CVD), laser ablation or arc discharge methods. The advancement in these techniques yielded monodispersed carbon nanotubes (CNTs) and allows p-type and n-type doping to enhance its electrical and catalytic activities. The functionalized CNTs showed exceptional mechanical, electrical and thermal conductivity (3500-5000 W/mK) properties. On the other hand, carbon quantum dots (CQDs) exhibit strong photoluminescence properties with high quantum yield. Carbon nanohorns are another fascinating type of nanomaterial that exhibit a unique structure with high surface area and excellent adsorption properties. These carbon nanomaterials could improve waste management by adsorbing pollutants from water and soil, enabling precise environmental monitoring, while enhancing wastewater treatment and drug delivery systems. Herein, we have discussed the potentials of all these carbon nanomaterials in the context of innovative waste management solutions, fostering cleaner environments and healthier ecosystems for diverse biomedical applications such as biosensing, drug delivery, and environmental monitoring.

Carbon Dots in Photodynamic/Photothermal Antimicrobial Therapy

Antimicrobial resistance (AMR) presents an escalating global challenge as conventional antibiotic treatments become less effective. In response, photodynamic therapy (PDT) and photothermal therapy (PTT) have emerged as promising alternatives. While rooted in ancient practices, these methods have evolved with modern innovations, particularly through the integration of lasers, refining their efficacy. PDT harnesses photosensitizers to generate reactive oxygen species (ROS), which are detrimental to microbial cells, whereas PTT relies on heat to induce cellular damage. The key to their effectiveness lies in the utilization of photosensitizers, especially when integrated into nano- or micron-scale supports, which amplify ROS production and enhance antimicrobial activity. Over the last decade, carbon dots (CDs) have emerged as a highly promising nanomaterial, attracting increasing attention owing to their distinctive properties and versatile applications, including PDT and PTT. They can not only function as photosensitizers, but also synergistically combine with other photosensitizers to enhance overall efficacy. This review explores the recent advancements in CDs, underscoring their significance and potential in reshaping advanced antimicrobial therapeutics.

User-Friendly Multifunctional Red-Emissive Carbon Dots for Rapid Cell Nucleus Staining via Targeting Nuclear Proteins

Cytoarchitectural staining is of great importance in disease diagnosis and cell biology research. This study developed user-friendly multifunctional red-emissive carbon dots (R-CDs) for rapid cell nucleus staining via targeting nuclear proteins. R-CDs, simply prepared by electrochemical treatment of 1,2,4-benzenetriamine, exhibit strong emission at 635 nm when excited at 507 nm. The R-CDs can rapidly stain the nucleus of human SH-SY5Y, HepG2, and HUH-7 cells with a high signal-to-noise ratio owing to fluorescence enhancement after entering the nucleus. Compared to conventional cytosolic dyes such as Hoechst and DAPI, R-CDs are cheaper, more highly dispersed in water, and more stable (requiring no stringent storage conditions). The R-CDs show stable optical properties with insignificant photobleaching over 7 days and salt resistance up to 2 M of NaCl. More importantly, R-CDs, possessing a positive charge, allow rapid staining of live cells (3 min) and dead cells (10 s) in saline. According to kinetic variation, R-CDs can distinguish live cells from dead cells. Staining exhibits high efficiency in onion epidermal cells, Aspergillus niger, Caenorhabditis elegans, and human spermatozoa. The mechanism for efficient staining is based on their fast accumulation in the nucleus due to their small size and positive charge and strong interaction with nuclear proteins at amino acid residues of histidine and arginine, resulting in fluorescence enhancement by dozens of times. The developed R-CDs do not bind to DNA and would not cause genetic damage and will find various safe applications in biological and medical fields.

Carbon Dots: From Synthesis to Unraveling the Fluorescence Mechanism

Carbon dots (CDs) being a new type of carbon-based nanomaterial have attracted intensive interest from researchers owing to their excellent biophysical properties. CDs are a class of fluorescent carbon nanomaterials that have emerged as a promising alternative to traditional quantum dots and organic dyes in applications including bioimaging, sensing, and optoelectronics. CDs possess unique optical properties, such as tunable emission, facile synthesis, and low toxicity, making them attractive for many applications in biology, medicine, and environmental areas. The synthesis of CDs is achievable by a variety of methods, including bottom-up and top-down approaches, involving the use of different carbon sources and surface functionalization strategies. However, understanding the fluorescence mechanism of CDs remains a challenge. Various mechanistic models have been proposed to explain their origin of luminescence. This review summarizes the recent developments in the synthesis and functionalization of CDs and provides an overview of the current understanding of the fluorescence mechanism.

Polyphenolic Carbon Quantum Dots with Intrinsic Reactive Oxygen Species Amplification for Two-Photon Bioimaging and In Vivo Tumor Therapy

Recent studies indicate that mitochondrial dysfunctions and DNA damage have a critical influence on cell survival, which is considered one of the therapeutic targets for cancer therapy. In this study, we demonstrated a comparative study of the effect of polyphenolic carbon quantum dots (CQDs) on in vitro and in vivo antitumor efficacy. Dual emissive (green and yellow) shape specific polyphenolic CQDs (G-CQDs and Y-CQDs) were synthesized from easily available nontoxic precursors (phloroglucinol), and the antitumor property of the as-synthesized probe was investigated as compared to round-shaped blue emissive CQDs (B-CQDs) derived from well-reported precursor citric acid and urea. The B-CQDs had a nuclei-targeting property, and G-CQDs and Y-CQDs had mitochondria-targeting properties. We have found that the polyphenol containing CQDs (at a dose of 100 μg mL-1) specifically attack mitochondria by excess accumulation, altering the metabolism, inhibiting branching pattern, imbalanced Bax/Bcl-2 homeostasis, and ultimately generating oxidative stress levels, leading to oxidative stress-induced cell death in cancer cells in vitro. We show that G-CQDs are the main cause of oxidative stress in cancer cells because of their ability to produce sufficient •OH- and 1O2 radicals, evidenced by electron paramagnetic resonance spectroscopy and a terephthalic acid test. Moreover, the near-infrared absorption properties of the CQDs were exhibited in two-photon (TP) emission, which was utilized for TP cellular imaging of cancer cells without photobleaching. The in vivo antitumor test further discloses that intratumoral injection of G-CQDs can significantly augment the treatment efficacy of subcutaneous tumors without any adverse effects on BalB/c nude mice. We believe that shape-specific polyphenolic CQD-based nanotheranostic agents have a potential role in tumor therapy, thus proving an insight on treatment of malignant cancers.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Meticulously Designed Carbon Dots as Photo-Triggered RNA-Destroyer for Evoking Pyroptosis

An ideal photosensitizer for photodynamic therapy should not only possess high reactive oxygen species (ROS) generation efficiency but also maximize utilization of the in situ produced ROS species, where the latter is closely related to its intracellular location. However, rational design of such photosensitizer without tedious conjugation procedures remains a grand challenge. Here, we report the one-pot preparation of carbon dots (CDs)-based photosensitizer from levofloxacin and neutral red featuring both high 1O2 quantum yield (φΔ = 38.85%) and superior RNA selectivity. Moreover, the φΔ value shows a further 40% improvement and reaches 54.33% in response to RNA binding. Owing to these combined attributes, the CDs could exert great damage to the cellular RNA system (termed the RNA-destroyer) under extremely low dosage of light irradiation (15 mW cm-2, 1 min). It induces pyroptotic cell death and causes rapid release of different cytokines that served as molecular markers in photodynamic immunotherapy. This work represents the meticulously designed CDs with high ROS generation and utilization efficiency via good organization of the photosensitive and targeting modularity. Moreover, it is the first CDs-based pyroptosis inducer to the best of our knowledge.

Highly luminescent nitrogen and sulfur co-doped carbon dots for Sn2+ and S2- sensing and dual-mode anti-counterfeiting

The preparation of nitrogen and sulfur co-doped carbon dots (N, S-CDs) with highly bright orange-red fluorescence is reported through a facile solvothermal approach with naphthalenetetracarboxylic dianhydride as starting material. The N, S-CDs exhibited superior properties, including intense long-wavelength emission with a narrow full width at half maxima (FWHM) of 33 nm, high fluorescence quantum yield (QY) of 60.5% in aqueous solution, excitation-independent emission behavior, and excellent water dispersibility. In addition, sulfide ions (S^2-) could selectively recover the fluorescence of N, S-CDs quenched by Sn²⁺. The selective experiment suggested that the N, S-CDs/Sn²⁺ complex could be used as a fluorescence-enhancement sensor for sulfide ions (S^2-), with the linear range of 5-50 μM and the LOD of 0.35 μM. The practicality and feasibility of this sensor for the determination of sulfide ions in tap and lake water were verified with good recoveries. Furthermore, because of their highly bright fluorescence and strong water solubility, the N, S-CDs could be easily fabricated into fluorescent ink and transparent films, demonstrating the promising application in anti-counterfeiting. Therefore, the designed N, S-CDs exhibited the advantages of facile preparation, intense fluorescence, high stability, easy processing, and selective fluorescence change for specific analytes, which showed high potential in fluorescence detection and anti-counterfeiting.

RNA-Targeting Carbon Dots for Live-Cell Imaging of Granule Dynamics

It is significant to monitor the different RNA granules dynamics and phase separation process inside cells under various stresses, for example, oxidative stress. The current small-molecule RNA probes work well only in fixed cells and usually encounter problems such as insufficient stability and biocompatibility, and thus a specific RNA-targeting fluorescent nanoprobe that can be used in the living cells is urgently desired. Here, the de novo design and microwave-assisted synthesis of a novel RNA-targeting, red-emissive carbon dots (named as M-CDs) are reported by choosing neutral red and levofloxacin as precursors. The as-synthesized M-CDs is water-soluble with a high fluorescence quantum yield of 22.83% and can selectively bind to RNA resulting in an enhanced red fluorescence. More interestingly, such an RNA-targeting, red-emissive M-CDs can be fast internalized into cells within 5 s and thus used for real-time imaging the dynamic process of intracellular stress granules under oxidative stress, revealing some characteristics of granules that have not been identified by previously reported RNA and protein biomarkers. This research paves a new pathway for visualizing bulk RNA dynamics and studying phase-separation behaviors in living cells by rational design of the fluorescent carbon dots in terms of structure and functionality.

Synergism of Photo-Induced Electron Transfer and Aggregation-Induced Quenching Mechanisms for Highly Sensitive Detection of Silver Ion and Captopril

Carbon-based nanoprobes, with excellent physicochemical performance and biocompatibility, are a kind of ideal nanomaterial for biosensing. Herein, we designed and prepared novel oxygen-doped nitrogen-enrichment carbon nanoribbons (ONCNs) with an excellent optical performance and uniform morphology, which could be used as a dual-mode fluorescence probe for the detection of Ag⁺ ion and captopril (Ctl) based on the synergism of photo-induced electron transfer and aggregation-induced quenching mechanisms. By recording the changes in fluorescent intensities of ONCNs, the Ag⁺ ion and Ctl concentrations can be easily tested in real samples. The results displayed that two good linear relationships existed between the change in fluorescent intensity of ONCNs and the concentrations of Ag⁺ ion and Ctl in the ranges of 3 μM to 30 μM and 1 μM to 30 μM, with the detection limit of 0.78 µM and 74 nM, respectively. The proposed sensing platform has also been successfully applied for the Ctl analysis in commercial tablet samples based on its high selectivity, proving its value in practical applications.

Carbon nanosphere based bifunctional oxidoreductase nano-catalytic agent to mitigate hypoxia in cancer cells

Developing metal-free carbon nanozyme for tumor hypoxia is difficult. In biomedical applications, especially in the case of biomolecular detection, extensive research has been done on nanozymes with enzyme-mimicking catalytic activity. However, there are considerably fewer investigations on targeted nano-catalytic tumor therapy. Nano catalytic medicine-enabled chemotherapy is a safe and promising treatment strategy that involves the conversion of excess H₂O₂ into O₂ in a tumor environment. Here we have synthesized carbon nanosphere (CNS) using the Camellia sinensis plant (CS-CNS). Further surface functionalization was achieved via nitrilotriacetic acid conjugation (NTA@CS-CNS). A stability study of synthesized nanozyme in the presence of various cations, anions, and 5 different pH range suggested the robustness of carbon based nanoassembly. The catalytic in vitro study shows that NTA@CS-CNS mimics peroxidase and catalase using TMB and H₂O₂ as substrates. NTA@CS-CNS showed K_m and V_max values of ~ 193.2 μM and 0.43 μM/s, ~ 413 μM and 1.42 μM/s, and ~ 378 μM and 1.63 μM/s, respectively when H₂O₂ and TMB was used for CAT and POD activity. Results showed that NTA@CS-CNS in combination with SFN and laser irradiation reduces hypoxia. Hence, our study could pave the path for the development of different non-toxic nano catalytic therapy for tumors in cancerous cells.

Orange-Emissive Carbon Dots with High Photostability for Mitochondrial Dynamics Tracking in Living Cells

Mitochondria play significant roles in maintaining a stable internal environment for cell metabolism. Hence, real-time monitoring of the dynamics of mitochondria is essential for further understanding mitochondria-related diseases. Fluorescent probes provide powerful tools for visualizing dynamic processes. However, most mitochondria-targeted probes are derived from organic molecules with poor photostability, making long-term dynamic monitoring challenging. Herein, we design a novel mitochondria-targeted probe based on carbon dots with high performance for long-term tracking. Considering that the targeting ability of CDs is related to surface functional groups, which are generally determined by the reaction precursors, we successfully constructed mitochondria-targeted O-CDs with emission at 565 nm through solvothermal treatment of m-diethylaminophenol. The O-CDs are bright with a high quantum yield of 12.61%, high mitochondria-targeting ability, and good stability. The O-CDs possess a high quantum yield (12.61%), specific mitochondria-targeting ability, and outstanding optical stability. Owing to the abundant hydroxyl and ammonium cations on the surface, O-CDs showed obvious accumulation in mitochondria with a high colocalization coefficient of up to 0.90 and remained steady even after fixation. Besides, O-CDs showed outstanding compatibility and photostability under various interruptions or long-time irradiation. Therefore, O-CDs are preferable for the long-term tracking of dynamic mitochondrial behavior in live cells. We first observed the mitochondrial fission and fusion behaviors in HeLa cells, and then, the size, morphology, and distribution of mitochondria in physiological or pathological conditions were clearly recorded. More importantly, we observed different dynamics interactions between mitochondria and lipid droplets during the apoptosis and mitophagy processes. This study provides a potential tool for exploring interactions between mitochondria and other organelles, further promoting the research on mitochondria-related diseases.

Rational synthesis of carbon dots with phosphate ester group for direct mapping of endogenous alkaline phosphatase and polarity monitoring in living cells

Carbon dots (CDs) have been extensively employed in biomolecule imaging. However, the imaging of biological enzymes with CDs has not been reported, which greatly limits their application in biological imaging. Herein, for the first time, a new type of fluorescent CDs is elaborately designed to realize the direct mapping of alkaline phosphatase (ALP) in cells. The obtained phosphorus and nitrogen co-doped CDs (P, N-CDs) generate specific structures including xanthene oxide and phosphate ester, thereby enabling P, N-CDs to be exclusively cleaved by ALP without auxiliary media. The fluorescence intensity of P, N-CDs can be specifically turned on in the presence of ALP, making them powerful probes for sensitive sensing of ALP activity with a detection limit of 1.27 U·L^-1. Meanwhile, P, N-CDs possessing electron deficiency structure fulfill sensitive responding to polarity variations. The excellent photo-bleaching resistance and biocompatibility of the P, N-CDs are taken for directly mapping the intracellular endogenous ALP via turned-on fluorescence imaging, as well as real-time monitoring the polarity fluctuation in cells through ratiometric fluorescence imaging. The present work offers a new way to design and synthesize functional CDs for direct imaging of intracellular enzymes.

Kinetically Controlled Synthesis of Highly Emissive Au18SG14 Clusters and Their Phase Transfer: Tips and Tricks

Glutathione (GSH) protected gold nanoclusters (Au _n SG _m NCs) have been attractive because of their novel properties such as enhanced luminescence and band gap tunability at their quantum confinement region (below ∼2 nm). Initial synthetic routes of mixed-size clusters and size-based separation techniques had latter evolved toward atomically precise nanoclusters via thermodynamic and kinetic control routes. One such exemplary synthesis taking the advantages of a kinetically controlled approach is producing highly red-emissive Au₁₈SG₁₄ NCs (where SG = thiolate of glutathione), thanks to the slow reduction kinetics provided by the mild reducing agent NaBH₃CN. Despite the developments in the direct synthesis of Au₁₈SG₁₄, several meticulous reaction conditions still need to be understood for the highly adaptable synthesis of atomically pure NCs irrespective of the laboratory conditions. Herein, we have systematically studied a series of reaction steps involved in this kinetically controlled approach starting from the role of the antisolvent, formation of precursors to Au-SG thiolates, growth of Au-SG thiolates as a function of aging time, and exploring an optimal reaction temperature to optimize the desired nucleation under slow reduction kinetics. The crucial parameters derived in our studies guide the successful and large-scale production of Au₁₈SG₁₄ at any laboratory condition. Next, we investigated the effect of pH on the NCs to study the stability and the best suitable condition for the phase transfer of Au₁₈SG₁₄ clusters. The commonly implemented method of phase transfer at the basic conditions (pH > 9) is not successful in this case. However, we developed a feasible method for the phase transfer by diluting the aqueous NC solution to enhance the negative charges on the NCs' surface by increasing the degree of dissociation at the carboxylic acid group. It is interesting to note that after the phase transfer, the Au₁₈SG₁₄-TOA NCs in toluene as well as in other organic solvents exhibited enhanced luminescence quantum yields from 9 to 3 times and increased average photoluminescence lifetimes by 1.5-2.5 times, respectively.

Facile synthesis of nitrogen-doped carbon dots as sensitive fluorescence probes for selective recognition of cinnamaldehyde and l-Arginine/l-Lysine in living cells

The disorder of amino acid metabolism and the abuse of small molecule drugs pose serious threats to public health. However, due to the limitations of existing detection technologies in sensing cinnamaldehyde (CAL) and l-Arginine/l-Lysine (l-Arg/l-Lys), there is an urgent need to develop new sensing strategies to meet the severe challenges currently facing. Herein, nitrogen-doped carbon dots (N-CDs) were developed using a simple one-pot hydrothermal carbonization method. These N-CDs exhibited numerous distinctive characteristics such as excellent photoluminescence, high water dispersibility, favorable biocompatibility, and superior chemical inertness. Strikingly, the as-prepared CDs as a highly efficient fluorescent probe possessed significant sensitivity and selectivity toward CAL and l-Arg/l-Lys over other analytes with a low detection limit of 58 nM and 16 nM/18 nM, respectively. The fluorescence of N-CDs could be quenched by CAL through an electron transfer process. Then, the strong electrostatic interaction between l-Arg/l-Lys and N-CDs induced the efficient fluorescence recovery. More importantly, the outstanding biosafety and excellent analyte-responsive fluorescence characteristics of N-CDs have also been verified in living cells as well as in serum and urine. Overall, the N-CDs had a wide application prospect in the diagnosis of amino acid metabolic diseases and small molecule drug sensing.

Carbon Dot@MXene Nanozymes with Triple Enzyme-Mimic Activities for Mild NIR-II Photothermal-Amplified Nanocatalytic Therapy

Nanozymes have shown promising potential in disease treatment owing to the advantages of low-cost, facile fabrication, and high stability. However, the highly complex tumor microenvironment (TME) and inherent low catalytic activity severely restrict the clinical applications of nanozymes. Herein, a novel mild hyperthermia-enhanced nanocatalytic therapy platform based on Z-scheme heterojunction nanozymes by depositing N-doped carbon dots (CDs) onto Nb₂ C nanosheets is constructed. CD@Nb₂ C nanozymes not only display outstanding photothermal effects in the safe and efficient NIR-II window but also possess triple enzyme-mimic activities to obtain amplified ROS levels. The triple enzyme-mimic activities and NIR-II photothermal properties of CD nanozymes are enhanced by the construction of Z-scheme heterojunctions owing to the accelerated carrier transfer process. More importantly, the introduction of mild hyperthermia can further improve the peroxidase-mimic and catalase-mimic activities as well as the glGSH depletion abilities of CD@Nb₂ C nanozymes, thereby producing more ROS to efficiently inhibit tumor growth. The combined therapy effect of CD@Nb₂ C nanozymes through mild NIR-II photothermal-enhanced nanocatalytic therapy can achieve complete tumor eradication. This work highlights the efficient tumor therapy potential of heterojunction nanozymes.

The Emerging Development of Multicolor Carbon Dots

As a relatively new type of fluorescent carbon-based nanomaterials, multicolor carbon dots (MCDs) have attracted much attention because of their excellent biocompatibility, tunable photoluminescence (PL), high quantum yield, and unique electronic and physicochemical properties. The multicolor emission characteristics of carbon dots (CDs) obviously depend on the carbon source precursor, reaction conditions, and reaction environment, which directly or indirectly determines the multicolor emission characteristics of CDs. Therefore, this review is the first systematic classification and summary of multiple regulation methods of synthetic MCDs and reviews the recent research progress in the synthesis of MCDs from a variety of precursor materials such as aromatic molecules, small organic molecules, and natural biomass, focusing on how different regulation methods produce corresponding MCDs. This review also introduces the innovative applications of MCDs in the fields of biological imaging, light-emitting diodes (LEDs), sensing, and anti-counterfeiting due to their excellent PL properties. It is hoped that by selecting appropriate adjustment methods, this review can inspire and guide the future research on the design of tailored MCDs, and provide corresponding help for the development of multifunctional MCDs.

Dual-emission carbon dots for sensitive fluorescence detection of metal ions and ethanol in water

Carbon dots (CDs) have been widely used in biomedical fields because of their superior optical properties, high sensitivity and high selectivity to specific substances. However, there are few studies on trace detection of the ethanol content in aqueous solution using CDs. Herein, novel red fluorescent CDs with dual emission are synthesized and show good dispersibility in various solvents and excitation independence of photoluminescence (PL). After investigating the structure and properties of the red CDs, a multifunctional fluorescent nanoprobe based on the red CDs with high-sensitivity detection for dual-ion trace detection of Fe³⁺ and Cu²⁺ can be successfully constructed. The limit of detection of Fe³⁺ and Cu²⁺ can be up to 0.024 μM and 0.036 μM, respectively, which is superior to that in previous reports. Meanwhile, in view of the specific solvent effect on their PL, the red CDs are able to be applied for trace detection of the ethanol content in aqueous solution. The methods of colorimetry and fluorescence spectrometry are utilized to perform the threshold test and high-sensitivity quantitative analysis of the ethanol content in aqueous solution. Based on this, a multifunctional fluorescent nanoprobe based on the dual-emission red CDs can be obtained, which provides a promising way for their applications in detection and sensing fields.

Carbon dots for multicolor cell imaging and ultra-sensitive detection of multiple ions in living cells: One Stone for multiple Birds

Given the significant impact of ions on environment pollution and human health, it is urgently needed to establish effective and convenient ion detection approaches, particularly in living cells. In this paper, we constructed multicolor N-doped-carbon dots (mPD-CDs) by facile one-step hydrothermal carbonization of m-phenylenediamine (mPD). mPD-CDs were successfully deployed for multicolor cellular imaging for animal cells, fungi, and bacteria in a wash-free way with high photostability and satisfactory biocompability. Moreover, mPD-CDs can be used as a fluorescent sensing probe for ultrasensitive detection of both iodide ion (I^-) and typical heavy metals such as cadmium (Cd²⁺), copper (Cu²⁺), mercury (Hg²⁺), gadolinium (Gd³⁺), ferrous ion (Fe²⁺), Zinc (Zn²⁺), and ferric ion (Fe³⁺). This is the first report using CDs as optical sensing probe for the detection of Gd³⁺, and for detection of Fe³⁺ with fluorescence "turn on". More significantly, with these versatile and fascinating properties, we applied mPD-CDs for intracellular ion detection in living cells like Hep G2 and S. cerevisiae, and zebra fish. Altogether, mPD-CDs displayed great potential for multicolor cell imaging and the multiple ion detection in vitro and in vivo, presenting a promising strategy for in-situ ultrasensitive sensing of multiple metal ions in the environment and the biological systems.

A novel carbon-nanodots-based theranostic nano-drug delivery system for mitochondria-targeted imaging and glutathione-activated delivering camptothecin

Chemotherapy is severely limited by continuously decreased therapeutic efficacy and uncontrolled side effects on normal tissue, which can be improved by constructing a nanoparticle-based drug delivery system (DDS). Nevertheless, no studies have reported on DDS-based on carbon-nanodots (CNDs), combining subcellular organelle-targeted imaging/drug delivery, high drug loading content, and glutathione (GSH)-sensitive drug release into one system. Herein, the as-fabricated CNDs can be covalently conjugated with a mitochondria-targeting ligand (triphenylphosphine, TPP), a smart GSH-responsive disulfide linker (S-S), and the anticancer drug (camptothecin, CPT) to initially prepare a theranostic nano-DDS (TPP-CNDs-S-CPT) with the drug loading efficiency of 64.6 wt%. Owing to excellent water dispersibility, superior fluorescence properties, satisfactory cell permeability, and favorable biocompatibility, TPP-CNDs-S-CPT was successfully used for intracellular mitochondrial-targeted imaging in vitro. High intracellular GSH concentrations in tumor cells caused the cleavage of S-S, resulting in concomitant activation and release of CPT, as well as significant fluorescence enhancement. In vivo, TPP-CNDs-S-CPT exhibited lower biological toxicity and even higher tumor-activatable performance than free CPT, as well as specific cancer therapy with few side effects. The mitochondria-targeted ability and the precise drug-release in tumor make TPP-CNDs-S-CPT a hopeful chemotherapy prodrug, providing significant theoretical basis and data support for in-depth understanding and exploration of chemotherapeutic DDS-based on CNDs.

Evaluation of chemotherapeutic response in living cells using subcellular Organelle‒Selective amphipathic carbon dots

Monitoring of structural changes in subcellular organelles is critical to evaluate the chemotherapeutic response of cells. However, commercial organelle selective fluorophores are easily photobleached, and thus are unsuitable for real-time and long-term observation. We have developed photostable carbon-dot liposomes (CDsomes)-based fluorophores for organellar and suborganellar imaging to circumvent these issues. The CDs synthesized through a mild pyrolysis/hydrolysis process exhibit amphipathic nature and underwent self-assembly to form liposome-like structures (CDsomes). The controlled hydrophilicity or hydrophobicity-guided preparation of CDsomes are used to selectively and rapidly (<1 min) stain nucleolus, cytoplasm, and membrane. In addition, the CDsomes offer universal high-contrast staining not only in fixed cells but also in living cells, allowing real-time observation and morphological identification in the specimen. The as-prepared CDsomes exhibit excitation-dependent fluorescence, and are much more stable under photoirradiation (e.g., ultraviolet light) than traditional subcellular dyes. Interestingly, the CDsomes can be transferred to daughter cells by diluting the particles, enabling multigenerational tracking of suborganelle for up to six generations, without interrupting the staining pattern. Therefore, we believe that the ultra-photostable CDsomes with high biocompatibility, and long-term suborganellar imaging capabilities, hold a great potential for screening and evaluating therapeutic performance of various chemotherapeutic drugs.

Facile and Green Synthesis of Highly Fluorescent Carbon Quantum Dots from Water Hyacinth for the Detection of Ferric Iron and Cellular Imaging

Natural biomass is used for facile synthesis of carbon quantum dots (CQDs) with high fluorescence, owing to its abundance, low cost, and eco-friendliness. In this study, a bottom-up hydrothermal method was used to prepare CQDs from water hyacinth (wh) at a constant temperature of 180 °C for 12 h. The synthesized wh-CQDs had uniform size, amorphous graphite structure, high water solubility (containing multiple hydroxyl and carboxyl groups on the surface), excitation light-dependent characteristics, and high photostability. The results showed that the aqueous solution of CQDs could detect Fe³⁺ rapidly, sensitively, and highly selectively with a detection limit of 0.084 μM in the linear range of 0–330 μM, which is much lower than the detection limit of 0.77 μM specified by the World Health Organization. More importantly, because the wh-CQDs were synthesized without any additives, they exhibited low toxicity to Klebsiella sp. cells even at high concentrations. Moreover, wh-CQDs emitted bright blue fluorescence in Klebsiella sp. cells, indicating its strong penetrating ability. Correspondingly, the fluorescent cell sorting results also revealed that the proportion of cell internalization reached 41.78%. In this study, wh-CQDs derived from natural biomass were used as high-performance fluorescent probes for Fe³⁺ detection and Klebsiella sp. imaging. This study is expected to have great significance for the application of biomass carbon spots in the field of cellular imaging and biology.

An insight into the potentials of carbon dots for in vitro live-cell imaging: recent progress, challenges, and prospects

Carbon dots (CDs) are a strong alternative to conventional fluorescent probes for cell imaging due to their brightness, photostability, tunable fluorescence emission, low toxicity, inexpensive preparation, and chemical diversity. Improving the targeting efficiency by modulation of the surface functional groups and understanding the mechanisms of targeted imaging are the most challenging issues in cell imaging by CDs. Firstly, we briefly discuss important features of fluorescent CDs for live-cell imaging application in this review. Then, the newest modulated CDs for targeted live-cell imaging of whole-cell, cell organelles, pH, ions, small molecules, and proteins are elaborately discussed, and their challenges in these fields are explained.

Enhanced Fluorescence and Environmental Stability of Red-Emissive Carbon Dots via Chemical Bonding with Cellulose Films

The development of red emission carbon dots with bright solid-state fluorescence would significantly broaden their application in optoelectronic devices and sensors. Herein, a red-emissive carbon dot-based nanocomposite has been synthesized through chemical bonding with cellulose films. The red emission originating from the surface states of carbon dots was maintained in the cellulose films. Due to the stable chemical bonding, the photoluminescence intensity and emission wavelength remained unchanged for 12 months, and the quantum yield of the composite was enhanced over 4 times. It also showed outstanding stability in water or weak acid-base environments under pHs ranging from 2 to 11. Therefore, the mechanism of chemical bonding that eliminated the defects and preserved the efficient radiative process through surface states was proposed.

Lipophilic Red-Emitting Carbon Dots for Detecting and Tracking Lipid Droplets in Live Cells

Lipid droplets (LDs), a dynamic organelle, are of vital importance in regulating the storage of neutral lipids and energy homeostasis. The aberrant expression of LDs is found to be highly associated with diverse metabolic diseases. Thus, detecting and monitoring LDs are essential to study the pathological and physiological processes of LDs in living bodies. However, it remains challenging to obtain suitable imaging probes to track LDs in vivo. Fortunately, the emergence of carbon dots (CDs), which are fluorescent nanomaterials with good biocompatibility and high stability, has provided us an unprecedented choice. In this work, CDs were synthesized via a solvothermal treatment of commercial reagents, 3-dimethylaminophenol. Interestingly, the prepared CDs show an intense red emission in non-hydrogen-bonding solution and have strong LD-targeting ability without any postmodification of ligands. Moreover, due to their low phototoxicity and excellent photostability, CDs were successfully applied to track the dynamics of LDs in live cells and image LDs in different cell lines and lipid-rich tissues. Overall, this work here proposed an LD-specific red-emitting CD probe, which will be of great value for learning more about LD-associated behaviors and diseases.

A novel fluorescence ratio probe based on dual-emission carbon dots for highly selective and sensitive detection of chlortetracycline and cell imaging

The novel dual-emission carbon dots (DECDs) for highly selective and sensitive recognition of chlortetracycline (CTC) and cell imaging were synthesized successfully by one-step synthesis. The obtained DECDs possessed two fluorescence peaks (345 nm and 450 nm) and showed specific response to CTC, resulting in a decrease in fluorescence intensity at 345 nm, a blue shift, and an increase in fluorescence intensity at 450 nm. The obtained DECDs exhibited highly selective response to CTC and not to its analogues, such as tetracycline, doxycycline, and oxytetracycline. Thus, an excellent ratiometric probe for the detection of CTC was fabricated successfully and used for the detection of CTC in real samples with the detection limit (LOD) of 16.45 nM. More importantly, the DECDs were used for quantitative detection of CTC in living cells, which demonstrated excellent biocompatibility and broad prospects in biomedicine application. Finally, the excellent selectivity of DECDs toward CTC was attributed to the FRET mechanism and the formation of complexes.

RGB-multicolor fluorescent carbon dots by changing the reaction solvent type for white light-emitting diodes

RGB-multicolor fluorescent carbon dots from o-phenylenediamine and phenylalanine by changing the solvent type and for white light-emitting diodes.

Fluorescent Probes for STED Optical Nanoscopy

Progress in developing fluorescent probes, such as fluorescent proteins, organic dyes, and fluorescent nanoparticles, is inseparable from the advancement in optical fluorescence microscopy. Super-resolution microscopy, or optical nanoscopy, overcame the far-field optical resolution limit, known as Abbe's diffraction limit, by taking advantage of the photophysical properties of fluorescent probes. Therefore, fluorescent probes for super-resolution microscopy should meet the new requirements in the probes' photophysical and photochemical properties. STED optical nanoscopy achieves super-resolution by depleting excited fluorophores at the periphery of an excitation laser beam using a depletion beam with a hollow core. An ideal fluorescent probe for STED nanoscopy must meet specific photophysical and photochemical properties, including high photostability, depletability at the depletion wavelength, low adverse excitability, and biocompatibility. This review introduces the requirements of fluorescent probes for STED nanoscopy and discusses the recent progress in the development of fluorescent probes, such as fluorescent proteins, organic dyes, and fluorescent nanoparticles, for the STED nanoscopy. The strengths and the limitations of the fluorescent probes are analyzed in detail.

Nitrogen and sulfur co-doped carbon dots with bright fluorescence for intracellular detection of iron ion and thiol

Carbon dots (CDs) have been widely used in recent years because of their excellent water solubility and abundant surface functional groups. However, compared with quantum dots or biological probes, the quantum yield of CDs is lower, and the fluorescence mainly concentrated in the blue-green range, which significantly limits the biological applications of CDs. Heteroatoms doping is the most common method to improve the luminescence of CDs. In this work, nitrogen and sulfur co-doped luminescent CDs were successfully synthesized by microwave assisted method using glutathione (GSH) and p-phenylenediamine (PPD) as raw materials. It can emit bright green fluorescence in ethanol solution, and the maximum emission wavelength is 535 nm when excited at 374 nm, and the absolute quantum yield is as high as 63%. Iron ion (Fe³⁺) can interact with the functional groups on the surface of the CDs to form CDs/Fe³⁺, which is a non-fluorescence complex, and Fe³⁺ can be reduced to ferrous ion (Fe²⁺). In other words, the reaction mechanism of CDs and Fe³⁺ is a combination of dynamic quenching and static quenching. The fluorescence of CDs quenched by Fe³⁺ can be restored by thiol, because there is a stronger binding force between sulfhydryl (-SH) on the surface of thiol and Fe³⁺, which enables CDs to be released. In addition, the CDs has good biocompatibility and stability, indicating that it has excellent potential in bioimaging. This discovery will expand the application of CDs in the fields of biosensing and imaging.

Lighting up Individual Organelles With Fluorescent Carbon Dots

Cell organelles play crucial roles in the normal functioning of an organism, therefore the disruption of their operation is associated with diseases and in some cases death. Thus, the detection and monitoring of the activities within these organelles are of great importance. Several probes based on graphene oxide, small molecules, and other nanomaterials have been developed for targeting specific organelles. Among these materials, organelle-targeted fluorescent probes based on carbon dots have attracted substantial attention in recent years owing to their superior characteristics, which include facile synthesis, good photostability, low cytotoxicity, and high selectivity. The ability of these probes to target specific organelles enables researchers to obtain valuable information for understanding the processes involved in their functions and/or malfunctions and may also aid in effective targeted drug delivery. This review highlights recently reported organelle-specific fluorescent probes based on carbon dots. The precursors of these carbon dots are also discussed because studies have shown that many of the intrinsic properties of these probes originate from the precursor used. An overview of the functions of the discussed organelles, the types of probes used, and their advantages and limitations are also provided. Organelles such as the mitochondria, nucleus, lysosomes, and endoplasmic reticulum have been the central focus of research to date, whereas the Golgi body, centrosome, vesicles, and others have received comparatively little attention. It is therefore the hope of the authors that further studies will be conducted in an effort to design probes with the ability to localize within these less studied organelles so as to fully elucidate the mechanisms underlying their function.

Photostable Red-Emitting Fluorescent Rhein-Magnesium(Ⅱ) Coordination Polymer Nanodot-Based Nanostructures With a Large Stokes Shift for Imaging Mitochondria in Cancer Cell

The mitochondria play a significant role in many cellular processes and are recognized as one of the most important therapeutic targets in cancer. Direct long-term imaging of the mitochondria is very crucial for treating cancer. However, the development of a red-emitting mitochondrial probe with a large Stokes shift and photostability remains highly challenging. Fluorescent metal complexes with superior physicochemical property have emerged as new fluorescent nanomaterials due to their increasing advantages in bioimaging. Herein, a luminescent pitaya-type nanostructure based on rhein-magnesium(II) (Rh-Mg) coordination polymer nanodots was used as a fluorescent nanoprobe to selectively image the mitochondria benefiting from the introduction of triphenylphosphine. The as-prepared Rh-Mg nanodot-based nanoprobe showed red emission peaking at 620 nm, a large Stokes shift (100 nm), and excellent photostability as compared with commercial mitochondrial probes. Due to these extraordinary features, this fluorescent nanoprobe was successfully used for mitochondrial targeting imaging of live cancer cell line Neuro-2a (mouse neuroblastoma) and BV2 microglial cells. Therefore, our results pave a new way for the design of fluorescent nanoprobes for imaging mitochondria in cancer cell.

Responsive Carbonized Polymer Dots for Optical Super-resolution and Fluorescence Lifetime Imaging of Nucleic Acids in Living Cells

The rapid development of advanced optical imaging methods including stimulated emission depletion (STED) and fluorescence lifetime imaging microscopy (FLIM) has provided powerful tools for real-time observation of submicrometer biotargets to achieve unprecedented spatial and temporal resolutions. However, the practical imaging qualities are often limited by the performance of fluorescent probes, leading to unsatisfactory results. In particular, long-term imaging of nucleic acids in living cells with STED and FLIM remained desirable yet challenging due to the lack of competent probes combining targeting specificity, biocompatibility, low power requirement, and photostability. In this work, we rationally designed and synthesized a nanosized carbonized polymer dot (CPD) material, CPDs-3, with highly efficient and photostable emission for the super-resolution and fluorescence lifetime imaging of nucleic acids in living cells. The as-fabricated nanoprobe showed responsive emission properties upon binding with nucleic acids, providing an excellent signal-to-noise ratio in both spatial and temporal dimensions. Moreover, the characteristic saturation intensity value of CPDs-3 was as low as 0.68 mW (0.23 MW/cm²), allowing the direct observation of chromatin structures with subdiffraction resolution (90 nm) at very low excitation (<1 μW) and depletion power (<5 mW). Owing to its low toxicity, high photonic efficiency, and outstanding photostability, CPDs-3 was capable of performing long-term imaging both with STED and FLIM setups, demonstrating great potential for the dynamic study of nucleic acid functionalities in the long run.

Cobalt-Doped Carbon Quantum Dots with Peroxidase-Mimetic Activity for Ascorbic Acid Detection through Both Fluorometric and Colorimetric Methods

In this work, we fabricated cobalt-doped carbon quantum dots (Co-CQDs) by a one-pot hydrothermal method with cobalt tetraphenylporphyrin and 1,2-ethanediamine as precursors. The morphology and structure of the Co-CQDs were characterized through transmission electron microscopy, X-ray diffraction spectra, Fourier transform infrared, and X-ray photoelectron spectra. The Co-CQDs emitted intense blue luminescence under ultraviolet irradiation and exhibited a typical excitation-dependent emission property. Moreover, they can act as a fluorescent probe for the detection of Fe³⁺ and ascorbic acid (AA) with high selectivity and sensitivity through an "on-off-on" mode. The limit of detection (LOD) of Fe³⁺ was measured as 38 μM (S/N = 3). The quenched emission of carbon quantum dots can be recovered with the addition of ascorbic acid (AA) to the Co-CQDs/Fe³⁺ system. The change of fluorescence was linear with the concentration of AA (0.6-1.6 mM) with the LOD of 18 μM. Furthermore, the Co-CQDs exhibited high oxidase-like catalytic behavior, which could convert transparent 3,3',5,5'-tetramethylbenzidine (TMB) into blue ox-TMB by dissolved oxygen. After adding ascorbic acid to the Co-CQDs/TMB system, the blue color of the solution faded due to the reduction of blue ox-TMB to colorless TMB. Based on this phenomenon, the Co-CQDs were capable of detecting AA (10-400 μM) with the LOD of 0.27 μM. The fluorometric and colorimetric assays based on the Co-CQDs for the AA detection were then successfully applied in fresh fruits. Furthermore, the high biocompatibility of the Co-CQDs against HeLa cells was verified by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method. Thus, the Co-CQDs could be used as a powerful tool for the detection of AA in real samples through a dual-mode method.

Research Progress in the Synthesis of Targeting Organelle Carbon Dots and Their Applications in Cancer Diagnosis and Treatment

With increasing knowledge about diseases at the histological, cytological to sub-organelle level, targeting organelle therapy has gradually been envisioned as an approach to overcome the shortcomings of poor specificity and multiple toxic side effects on tissues and cell-level treatments using the currently available therapy. Organelle carbon dots (CDs) are a class of functionalized CDs that can target organelles. CDs can be prepared by a "synchronous in situ synthesis method" and "asynchronous modification method." The superior optical properties and good biocompatibility of CDs can be preserved, and they can be used as targeting particles to carry drugs into cells while reducing leakage during transport. Given the excellent organelle fluorescence imaging properties, targeting organelle CDs can be used to monitor the physiological metabolism of organelles and progression of human diseases, which will provide advanced understanding and accurate diagnosis and targeted treatment of cancers. This study reviews the methods used for preparation of targeting organelle CDs, mechanisms of accurate diagnosis and targeted treatment of cancer, as well as their application in the area of cancer diagnosis and treatment research. Finally, the current difficulties and prospects for targeting organelle CDs are prospected.

Tunable Organelle Imaging by Rational Design of Carbon Dots and Utilization of Uptake Pathways

Employing one-step hydrothermal treatment of o-phenylenediamine and lysine to exploit their self- and copolymerization, four kinds of CDs (ECDs, NCDs, GCDs, and LCDs) are synthesized, possessing different surface groups (CH₃, C-O-C, NH₂, and COOH) and lipophilicity which endow them with various uptake pathways to achieve tunable organelle imaging. Specifically, highly lipophilic ECDs with CH₃ group and NCDs with C-O-C group select passive manner to target to endoplasmic reticulum and nucleus, respectively. Amphiphilic GCDs with CH₃, C-O-C and NH₂ groups prefer caveolin-mediated endocytosis to locate at Golgi apparatus. Highly hydrophilic LCDs with CH₃, NH₂ and COOH groups are involved in clathrin-mediated endocytosis to localize in lysosomes. Besides, imaging results of cell division, three-dimensional reconstruction and living zebrafish demonstrate that the obtained CDs are promising potential candidates for specific organelle-targeting imaging.

Quantitative Structure-Activity Relationship Enables the Rational Design of Lipid Droplet-Targeting Carbon Dots for Visualizing Bisphenol A-Induced Nonalcoholic Fatty Liver Disease-like Changes

Lipid droplets (LDs) play indispensable roles in numerous physiological processes; hence, the visualization of the dynamic behavior of LDs in living cells is of great importance in physiological and pathological research. In this article, the quantitative structure-activity relationship (QSAR) theory was employed as an effective design strategy for the development of organelle-targeting carbon dots (CDs). The lipid-water partition coefficient (Log P) of the QSAR was adopted as a key parameter to predict the cellular uptake and subcellular localization of CDs in live cells. By carefully adjusting the molecular structure and lipophilicity of the precursors, p-phenylenediamine-derivatized nucleolus-targeting hydrophilic CDs were converted to lipophilic CDs [4-piperidinoaniline (PA) CDs] with inherent LD-targeting performance. The PA CDs were able to indicate the dynamic behavior of LDs and visualize the changes of bisphenol A-induced nonalcoholic fatty liver disease-like changes in a cellular model. The QSAR strategy of CDs demonstrated here is expected to be increasingly exploited as a powerful design tool for developing various organelle-targeting CDs.

Engineering Mitochondriotropic Carbon Dots for Targeting Cancer Cells

Aiming to understand and enhance the capacity of carbon dots (CDs) to transport through cell membranes and target subcellular organelles—in particular, mitochondria—a series of nitrogen-doped CDs were prepared by the one-step microwave-assisted pyrolysis of citric acid and ethylenediamine. Following optimization of the reaction conditions for maximum fluorescence, functionalization at various degrees with alkylated triphenylphosphonium functional groups of two different alkyl chain lengths afforded a series of functionalized CDs that exhibited either lysosome or mitochondria subcellular localization. Further functionalization with rhodamine B enabled enhanced fluorescence imaging capabilities in the visible spectrum and allowed the use of low quantities of CDs in relevant experiments. It was thus possible, by the appropriate selection of the alkyl chain length and degree of functionalization, to attain successful mitochondrial targeting, while preserving non-toxicity and biocompatibility. In vitro cell experiments performed on normal as well as cancer cell lines proved their non-cytotoxic character and imaging potential, even at very low concentrations, by fluorescence microscopy. Precise targeting of mitochondria is feasible with carefully designed CDs that, furthermore, are specifically internalized in cells and cell mitochondria of high transmembrane potential and thus exhibit selective uptake in malignant cells compared to normal cells.

Preparation of carbon dots-based nanoparticles and their research of bioimaging and targeted antitumor therapy

Carbon dots (CDs) are nanomaterials with excellent photoluminescence property, usually used in the field of bioimaging tumor cells. However, its practical applicability in cancer therapeutics is limited by CDs' insensitive surface properties to complicated tumor microenvironment in vivo. Herein, a new type of innovative biomimetic nanoparticles has been formed with HeLa cell membranes (CM) and multifunctional CDs containing antitumor and bioimaging activities. The CDs are prepared by a facile one-step microwave-assisted procedure. Gallic acid is used as carbon resource and antitumor active molecule. Gelatin is treated as the nitrogen resource. Citric acid monohydrate is used as the auxiliary carbon source and the Hela CM is used for tumor targeting. A series of fluorescence analyses has proved its homotypic targeting and ability of diagnosis. Besides, in vitro and in vivo antitumor experiments further indicate their better antitumor efficiency. The findings show the totally new nanoparticles' feasibilities of dealing with the clinical therapy problems as well as applying for the integration of diagnosis and targeting therapy.

Spying on the Polarity Dynamics during Wound Healing of Zebrafish by Using Rationally Designed Carbon Dots

Wound healing is an essential and complex biological process. Research into its mechanism and factors that influence its effectiveness has led to better treatments. Changes in the microenvironment are demonstrated to affect wound healing. Cell polarity is a significant microenvironment-related parameter that is associated with many physiological and pathological activities. However, dynamic changes in polarity during wound healing have not been investigated. Monitoring cell polarity during wound healing may open up a new avenue for developing better treatments. Here, a method is developed to monitor cell polarity that involved taking advantage of the fascinating optical properties and biocompatibility of carbon dots (CDs). Specifically, near-infrared (NIR) polarity-sensitive N-phenyl-p-phenylenediamine (PPh-CDs) are successfully prepared, which exhibit high sensitivity to polarity, with 509-fold stronger fluorescence in dioxane than in water. The PPh-CDs are successfully applied to monitor the changes of lysosomal polarity during starvation conditions. Using this method, dynamic changes of polarity during wound healing of zebrafish are monitored for the first time. Upon an amputation performed at the zebrafish tail, stronger PPh-CDs fluorescence appeared at the wound sites, and the intensity increased for 25 min and then gradually decreased. This report provides an important experimental basis for investigating wound healing by employing polarity-sensitive CDs.

An understanding of mitochondria and its role in targeting nanocarriers for diagnosis and treatment of cancer

Nanotechnology has changed the entire paradigm of drug targeting and has shown tremendous potential in the area of cancer therapy due to its specificity. In cancer, several targets have been explored which could be utilized for the better treatment of disease. Mitochondria, the so-called powerhouse of cell, portrays significant role in the survival and death of cells, and has emerged as potential target for cancer therapy. Direct targeting and nanotechnology based approaches can be tailor-made to target mitochondria and thus improve the survival rate of patients suffering from cancer. With this backdrop, in present review, we have reemphasized the role of mitochondria in cancer progression and inhibition, highlighting the different targets that can be explored for targeting of disease. Moreover, we have also summarized different nanoparticulate systems that have been used for treatment of cancer via mitochondrial targeting.

Dual-signal uric acid sensing based on carbon quantum dots and o-phenylenediamine

Fluorescent carbon quantum dots (CQDs), which showed excitation-dependent emission characteristics, were prepared using a facile hydrothermal method. The structure and optical properties of CQDs were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-Vis spectroscopy, and fluorescence spectroscopy. These CQDs also showed peroxidase-like activity and could catalyze the H₂O₂-mediated oxidation of o-phenylenediamine (OPD) to form 2,3-diaminophenazine (DAP) with an absorption peak at 420 nm. DAP exhibited an obvious fluorescence emission at 550 nm under the excitation of 360 nm. On the other hand, it decreased the fluorescence of CQDs at 450 nm via inner filter effect. The experimental results indicated that the H₂O₂ concentration affected the color of DAP and the fluorescence intensity of CQDs and DAP. Thus, a colorimetric and ratiometric fluorescence dual-signal method was established for measuring the concentrations of H₂O₂ and uric acid (UA). The effects of pH, incubation temperature, incubation time, and OPD concentration on the response were investigated. Under the conditions of pH 7.5, temperature 50 °C, incubation time 30 min, and OPD 1.5 mM, the absorbance and fluorescence intensity ratio responses were linearly dependent on UA concentration ranging from 5.0 μM to 100 μM. The limits of detection were 0.7 and 0.5 μM with a colorimetric method and ratiometric fluorescence method, respectively. More importantly, this dual responsive method has been applied to the determination of UA in urine samples with satisfactory results.

Shedding New Lights Into STED Microscopy: Emerging Nanoprobes for Imaging

First reported in 1994, stimulated emission depletion (STED) microscopy has long been regarded as a powerful tool for real-time superresolved bioimaging . However, high STED light power (101∼3 MW/cm2) is often required to achieve significant resolution improvement, which inevitably introduces phototoxicity and severe photobleaching, damaging the imaging quality, especially for long-term cases. Recently, the employment of nanoprobes (quantum dots, upconversion nanoparticles, carbon dots, polymer dots, AIE dots, etc.) in STED imaging has brought opportunities to overcoming such long-existing issues. These nanomaterials designed for STED imaging show not only lower STED power requirements but also more efficient photoluminescence (PL) and enhanced photostability than organic molecular probes. Herein, we review the recent progress in the development of nanoprobes for STED imaging, to highlight their potential in improving the long-term imaging quality of STED microscopy and broadening its application scope. We also discuss the pros and cons for specific classes of nanoprobes for STED bioimaging in detail to provide practical references for biological researchers seeking suitable imaging kits, promoting the development of relative research field.

One-step synthesis of red emission multifunctional carbon dots for label-free detection of berberine and curcumin and cell imaging

In this work, the red emission multifunctional carbon dots (R-CDs) were prepared via one-pot hydrothermal strategy of neutral red (NR) and ethylenediamine (EDA) for the label-free detection of berberine and curcumin, cell imaging, and fluorescent flexible film. The as-fabricated R-CDs not only possess good water dispersibility and excellent fluorescence stability, but also were successfully employed as a photoluminescent nanoprobe for label-free monitoring of berberine (BRH) and curcumin (Cur) based on dynamic quenching and internal filter effect (IFE), respectively. More importantly, as-proposed R-CDs displayed outstanding cellular permeability and lower cytotoxicity for cellular applications, which was consistent with the results of confocal fluorescence imaging and cell viability measurement of SMMC7721 cells. Thus, the multifunctional R-CDs may provide a rich tool library for biosensing and cellular imaging reagent applications. Interestingly, R-CDs were also used to manufacture R-CDs/PVA composites as fluorescent flexible films. To the best of our knowledge, this is the first demonstration of a label-free multifunctional fluorescent nanoprobe for berberine and curcumin based on red emission CDs.

Novel yellow solid-state fluorescent-emitting carbon dots with high quantum yield for white light-emitting diodes

Fluorescence quenching of carbon dots (CDs) occurs in their aggregated state ascribed to direct π-π interactions or excessive resonance energy transfer (RET). Thus, CDs have been severely restricted for applications requiring phosphors that emit in the solid state, such as the fabrication of white light-emitting diodes (WLEDs). In this report, novel CDs with bright solid-state fluorescence (SSF) were synthesized by simple microwave-assisted synthesis method, using 1,4,7,10-tetraazacyclododecane (cyclen) and citric acid as precursors. Under 365 nm UV light, these CDs emit bright yellow SSF, indicating they successfully overcome the aggregation-induced fluorescence quenching (ACQ) effect. When the excitation wavelength (λ_ex) is fixed at 450 nm, the emission peak of the CDs is centered at 546 nm with the Commission Internationale de l'Eclairage chromaticity (CIE) coordinates of (0.43, 0.55), which means that they can be combined with a blue-emitting chip in order to fabricate WLEDs. More importantly, the absolute quantum yield (QY) of these CDs powder reached 48% at λ_ex of 450 nm, which was much higher than many previously reported SSF-emitting CDs and indicating their high light conversion ability in solid-state. Thanks to the excellent optical property of these CDs powder, they were successfully used in the preparation of high-performance WLEDs. This study not only enriches SSF-emitting CD-based nanomaterials with good prospects for application, but also provides valuable reference for subsequent research on the synthesis of solid-state fluorescent CDs.