Aggregation Behavior of Tyloxapol, a Nonionic Surfactant Oligomer, in Aqueous Solution

Enhancement of therapeutic efficacy of Brinzolamide for Glaucoma by nanocrystallization and tyloxapol addition

BACKGROUND

Brinzolamide (BRI) suspensions are used for the treatment of glaucoma; however, sufficient drug delivery to the target tissue after eye drop administration is hampered by poor solubility. To address this issue, we focused on nanocrystal technology, which is expected to improve the bioavailability of poor-solubility drugs, and investigated the effect of BRI nanocrystal formulations on corneal permeability and intraocular pressure (IOP)-reducing effect.

METHODS

BRI nanocrystal formulations were prepared by the wet-milling method with beads and additives. The particle size was measured by NANOSIGHT LM10, and the morphology was determined using a scanning probe microscope (SPM-9700) and a scanning electron microscope (SEM). Corneal permeability was evaluated in vitro using a Franz diffusion cell with rat corneas and in vivo using rabbits, and the IOP-reducing effect was investigated using a rabbit hypertensive model.

RESULTS

The particle size range for prepared BRI nanocrystal formulation was from 50 to 300 nm and the mean particle size was 135 ± 4 nm. The morphology was crystalline, and the nanoparticles were uniformly dispersed. In the corneal permeability study, BRI nanocrystallization exhibited higher corneal permeability than non-milled formulations. This result may be attributed to the increased solubility of BRI by nanocrystallization and the induction of energy-dependent endocytosis by the attachment of BRI nanoparticles to the cell membrane. Furthermore, the addition of tyloxapol to BRI nanocrystal formulation further improved the intraocular penetration of BRI and showed a stronger IOP-reducing effect than the commercial product.

CONCLUSIONS

The combination of BRI nanocrystallization and tyloxapol is expected to be highly effective in glaucoma treatment and a useful tool for new ophthalmic drug delivery.

The Salt-Induced Diffusiophoresis of Nonionic Micelles-Does the Salt-Induced Growth of Micelles Influence Diffusiophoresis?

Salt-induced diffusiophoresis is the migration of a colloidal particle in water due to a directional salt concentration gradient. An important example of colloidal particles is represented by micelles, generated by surfactant self-assembly in water. For non-ionic surfactants containing polyethylene glycol (PEG) groups, PEG preferential hydration at the micelle-water interface is expected to drive micelle diffusiophoresis from high to low salt concentration. However, micelles are reversible supramolecular assemblies, with salts being able to promote a significant change in micelle size. This phenomenon complicates the description of diffusiophoresis. Specifically, it is not clear to what extent the salt-induced growth of micelles affects micelle diffusiophoresis. In this paper, a multiple-equilibrium model is developed for assessing the contribution of the micelle growth and preferential hydration mechanisms to the diffusiophoresis of non-ionic micelles. The available experimental data characterizing the effect of NaCl on Triton X-100 aggregation number are combined with data on diffusiophoresis and the preferential hydration of PEG chains to show that the contribution of the micelle growth mechanism to overall diffusiophoresis is small compared to that of preferential hydration.

Nanostructured Lipid Carriers for Enhanced Transscleral Delivery of Dexamethasone Acetate: Development, Ex Vivo Characterization and Multiphoton Microscopy Studies

Corticosteroids, although highly effective for the treatment of both anterior and posterior ocular segment inflammation, still nowadays struggle for effective drug delivery due to their poor solubilization capabilities in water. This research work aims to develop nanostructured lipid carriers (NLC) intended for periocular administration of dexamethasone acetate to the posterior segment of the eye. Pre-formulation studies were initially performed to find solid and liquid lipid mixtures for dexamethasone acetate solubilization. Pseudoternary diagrams at 65 °C were constructed to select the best surfactant based on the macroscopic transparency and microscopic isotropy of the systems. The resulting NLC, obtained following an organic solvent-free methodology, was composed of triacetin, Imwitor® 491 (glycerol monostearate >90%) and tyloxapol with Z-average = 106.9 ± 1.2 nm, PDI = 0.104 ± 0.019 and zeta potential = -6.51 ± 0.575 mV. Ex vivo porcine sclera and choroid permeation studies revealed a considerable metabolism in the sclera of dexamethasone acetate into free dexamethasone, which demonstrated higher permeation capabilities across both tissues. In addition, the NLC behavior once applied onto the sclera was further studied by means of multiphoton microscopy by loading the NLC with the fluorescent probe Nile red.

Esterase-Responsive Polymeric Micelles Containing Tetraphenylethene and Poly(ethylene glycol) Moieties for Efficient Doxorubicin Delivery and Tumor Therapy

Enzyme-responsive drug delivery systems have drawn much attention in the field of cancer theranostics due to their high sensitivity and substrate specificity under mild conditions. In this study, an amphiphilic polymer T1 is reported, which contains a tetraphenylethene unit and a poly(ethylene glycol) chain linked by an esterase-responsive phenolic ester bond. In aqueous solution, T1 formed stable micelles via self-assembly, which showed an aggregation-induced emission enhancement of 32-fold at 532 nm and a critical micelle concentration of 0.53 μM as well as esterase-responsive activity. The hydrophobic drug doxorubicin (DOX) was efficiently encapsulated into the micelles with a drug loading of 21%. In the presence of the esterase, the selective decomposition of drug-loaded T1 micelles was observed, and DOX was subsequently released with a half-life of 5 h. In vitro antitumor studies showed that T1@DOX micelles exhibited good therapeutic effects on HeLa cells, while normal cells remained mostly intact. In vivo anticancer experiments revealed that T1@DOX micelles indeed suppressed tumor growth and had reduced side effects compared to DOX·HCl. The present work showed the potential clinical application of esterase-responsive drug delivery in cancer therapy.

Solution behavior and encapsulation properties of fatty acid-elastin-like polypeptide conjugates

Developing new biomaterials is an active research area owing to their applications in regenerative medicine, tissue engineering and drug delivery. Elastin-like polypeptides (ELPs) are good candidates for these applications because they are biosourced, biocompatible and biodegradable. With the aim of developing ELP-based micelles for drug delivery applications we have synthesized 15 acyl-ELP compounds by conjugating myristic, palmitic, stearic, oleic or linoleic acid to the N-terminus of three ELPs differing in molar mass. The ELP-fatty acid conjugates have interesting solution behavior. They form micelles at low temperatures and aggregate above the cloud point temperature (Tcp). The critical micelle concentration depends on the fatty acid nature while the micelle size is mainly determined by the ELP block length. We were able to show that ELPs were better hydrated in the micelles than in their individual state in solution. The micelles are stable in phosphate-buffered saline at temperatures below the Tcp, which can vary between 20 °C and 38 °C depending on the length or hydrophilicity of the ELP. Acyl-ELP micelles were loaded with the small hydrophobic molecule Nile red. The encapsulation efficiency and release kinetics showed that the best loading conditions were achieved with the largest ELP conjugated to stearic acid.

Isolation of Environmental Bacteria Able to Degrade Sterols and/or Bile Acids: Determination of Cholesterol Oxidase and Several Hydroxysteroid Dehydrogenase Activities in Rhodococcus, Gordonia, and Pseudomonas putida

Interest about the isolation and characterization of steroid-catabolizing bacteria has increased over time due to the massive release of these recalcitrant compounds and their deleterious effects or their biotransformation derivatives as endocrine disruptors for wildlife, as well as their potential use in biotechnological approaches for the synthesis of pharmacological compounds. Thus, in this chapter, an isolation protocol to select environmental bacteria able to degrade sterols, bile acids, and androgens is shown. Moreover, procedures for the determination of cholesterol oxidase or different hydroxysteroid dehydrogenase activities in Pseudomonas putida DOC21, Rhodococcus sp. HE24.12, Gordonia sp. HE24.4J and Gordonia sp. HE24.3 are also detailed.

3D Porous Collagen Matrices-A Reservoir for In Vitro Simultaneous Release of Tannic Acid and Chlorhexidine

The treatment of wounds occurring accidentally or as a result of chronic diseases most frequently requires the use of appropriate dressings, mainly to ensure tissue regeneration/healing, at the same time as treating or preventing potential bacterial infections or superinfections. Collagen type I-based scaffolds in tandem with adequate antimicrobials can successfully fulfill these requirements. In this work, starting from the corresponding hydrogels, we prepared a series of freeze-dried atelocollagen type I-based matrices loaded with tannic acid (TA) and chlorhexidine digluconate (CHDG) as active agents with a broad spectrum of antimicrobial activity and also as crosslinkers for the collagen network. The primary aim of this study was to design an original and reliable algorithm to in vitro monitor and kinetically analyze the simultaneous release of TA and CHDG from the porous matrices into an aqueous solution of phosphate-buffered saline (PBS, pH 7.4, 37 °C) containing micellar carriers of a cationic surfactant (hexadecyltrimethylammonium bromide, HTAB) as a release environment that roughly mimics human extracellular fluids in living tissues. Around this central idea, a comprehensive investigation of the lyophilized matrices (morpho-structural characterization through FT-IR spectroscopy, scanning electron microscopy, swelling behavior, resistance against the collagenolytic action of collagenase type I) was carried out. The kinetic treatment of the release data displayed a preponderance of non-Fickian-Case II diffusion behavior, which led to a general anomalous transport mechanism for both TA and CHDG, irrespective of their concentrations. This is equivalent to saying that the release regime is not governed only by the gradient concentration of the releasing components inside and outside the matrix (like in ideal Fickian diffusion), but also, to a large extent, by the relaxation phenomena of the collagen network (determined, in turn, by its crosslinking degree induced by TA and CHDG) and the dynamic capacity of the HTAB micelles to solubilize the two antimicrobials. By controlling the degree of physical crosslinking of collagen with a proper content of TA and CHDG loaded in the matrix, a tunable, sustainable release profile can be obtained.

Diffusiophoresis of a Nonionic Micelle in Salt Gradients; Roles of Preferential Hydration and Salt-Induced Surfactant Aggregation

Diffusiophoresis is the migration of a colloidal particle in water driven by concentration gradients of cosolutes such as salts. We have experimentally characterized the diffusiophoresis of tyloxapol micelles in the presence of MgSO4, a strong salting-out agent. Specifically, we determined the multicomponent-diffusion coefficients using Rayleigh interferometry, cloud points, and dynamic-light-scattering diffusion coefficients on the ternary tyloxapol-MgSO4-water system at 25 °C. Our experimental results show that micelle diffusiophoresis occurs from a high to a low salt concentration (positive diffusiophoresis). Moreover, our data were used to characterize the effect of salt concentration on micelle size and salt osmotic diffusion, which occurs from a high to a low surfactant concentration. Although micelle diffusiophoresis can be attributed to the preferential hydration of the polyethylene glycol surface groups, salting-out salts also promote an increase in the size of micellar aggregates, ultimately leading to phase separation at high salt concentration. This complicates diffusiophoresis description, as it is not clear how salt-induced surfactant aggregation contributes to micelle diffusiophoresis. We, therefore, developed a two-state aggregation model that successfully describes the observed effect of salt concentration on the size of tyloxapol micelles, in the case of MgSO4 and the previously reported case of Na2SO4. Our model was then used to theoretically evaluate the contribution of salt-induced aggregation to diffusiophoresis. Our analysis indicates that salt-induced aggregation promotes micelle diffusiophoresis from a low to a high salt concentration (negative diffusiophoresis). However, we also determined that this mechanism marginally contributes to overall diffusiophoresis, implying that preferential hydration is the main mechanism causing micelle diffusiophoresis. Our results suggest that sulfate salts may be exploited to induce the diffusiophoresis of PEG-functionalized particles such as micelles, with potential applications to microfluidics, enhanced oil recovery, and controlled-release technologies.

Rhamnolipid Micellization and Adsorption Properties

Biosurfactants are naturally occurring amphiphiles that are being actively pursued as alternatives to synthetic surfactants in cleaning, personal care, and cosmetic products. On the basis of their ability to mobilize and disperse hydrocarbons, biosurfactants are also involved in the bioremediation of oil spills. Rhamnolipids are low molecular weight glycolipid biosurfactants that consist of a mono- or di-rhamnose head group and a hydrocarbon fatty acid chain. We examine here the micellization of purified mono-rhamnolipids and di-rhamnolipids in aqueous solutions and their adsorption on model solid surfaces. Rhamnolipid micellization in water is endothermic; the CMC (critical micellization concentration) of di-rhamnolipid is lower than that of mono-rhamnolipid, and both CMCs decrease upon NaCl addition. Rhamnolipid adsorption on gold surface is mostly reversible and the adsorbed layer is rigid. A better understanding of biosurfactant self-assembly and adsorption properties is important for their utilization in consumer products and environmental applications.

Structure-antitumor activity relationships of tripodal imidazolium-amino acid based salts. Effect of the nature of the amino acid, amide substitution and anion

The antitumor activity of imidazolium salts is highly dependent upon their lipophilicity that can be tuned by the introduction of different hydrophobic substituents on the nitrogen atoms of the imidazolium ring of the molecule. Taking this into consideration, we have synthesized and characterized a series of tripodal imidazolium salts derived from L-valine and L-phenylalanine containing different hydrophobic groups and tested them against four cancer cell lines at physiological and acidic pH. At acidic pH (6.2) the anticancer activity of some of the tripodal compounds changes dramatically, and this parameter is crucial to control their cytotoxicity and selectivity. Moreover, several of these compounds displayed selectivity against the control healthy cell line higher than four. The transmembrane anion transport studies revealed moderate transport abilities suggesting that the observed biological activity is likely not the result of just their transport activity. The observed trends in biological activity at acidic pH agree well with the results for the CF leakage assay. These results strongly suggest that this class of compounds can serve as potential chemotherapeutic agents.

Imidazole and Imidazolium Antibacterial Drugs Derived from Amino Acids

The antibacterial activity of imidazole and imidazolium salts is highly dependent upon their lipophilicity, which can be tuned through the introduction of different hydrophobic substituents on the nitrogen atoms of the imidazole or imidazolium ring of the molecule. Taking this into consideration, we have synthesized and characterized a series of imidazole and imidazolium salts derived from L-valine and L-phenylalanine containing different hydrophobic groups and tested their antibacterial activity against two model bacterial strains, Gram-negative E. coli and Gram-positive B. subtilis. Importantly, the results demonstrate that the minimum bactericidal concentration (MBC) of these derivatives can be tuned to fall close to the cytotoxicity values in eukaryotic cell lines. The MBC value of one of these compounds toward B. subtilis was found to be lower than the IC₅₀ cytotoxicity value for the control cell line, HEK-293. Furthermore, the aggregation behavior of these compounds has been studied in pure water, in cell culture media, and in mixtures thereof, in order to determine if the compounds formed self-assembled aggregates at their bioactive concentrations with the aim of determining whether the monomeric species were in fact responsible for the observed antibacterial activity. Overall, these results indicate that imidazole and imidazolium compounds derived from L-valine and L-phenylalanine—with different alkyl lengths in the amide substitution—can serve as potent antibacterial agents with low cytotoxicity to human cell lines.

Bi-functional sterically hindered phenol lipid-based delivery systems as potential multi-target agents against Alzheimer's disease via an intranasal route

New lipid-based nanomaterials and multi-target directed ligands (MTDLs) based on sterically hindered phenol, containing a quaternary ammonium moiety (SHP-s-R, with s = 2,3) of varying hydrophobicity (R = CH2Ph and CnH2n+1, with n = 8, 10, 12, 16), have been prepared as potential drugs against Alzheimer's disease (AD). SHP-s-R are inhibitors of human cholinesterases with antioxidant properties. The inhibitory potency of SHP-s-R and selectivity ratio of cholinesterase inhibition were found to significantly depend on the length of the methylene spacer (s) and alkyl chain length. The compound SHP-2-16 showed the best IC50 for human AChE and the highest selectivity, being 30-fold more potent than for human BChE. Molecular modeling of SHP-2-16 binding to human AChE suggests that this compound is a dual binding site inhibitor that interacts with both the peripheral anionic site and catalytic active site. The relationship between self-assembly parameters (CMC, solubilization capacity, aggregation number), antioxidant activity and a toxicological parameter (hemolytic action on human red blood cells) was investigated. Two sterically hindered phenols (SHP-2-Bn and SHP-2-R) were loaded into L-α-phosphatidylcholine (PC) nanoparticles by varying the SHP alkyl chain length. For the brain AChE inhibition assay, PC/SHP-2-Bn/SHP-2-16 nanoparticles were administered to rats intranasally at a dose of 8 mg kg-1. The Morris water maze experiment showed that scopolamine-induced AD-like dementia in rats treated with PC/SHP-2-Bn/SHP-2-16 nanoparticles was significantly reduced. This is the first example of cationic SHP-phospholipid nanoparticles for inhibition of brain cholinesterases realized by the use of intranasal administration. This route has promising potential for the treatment of AD.

Synthesis, structure-activity relationship and biological evaluation of tetracationic gemini Dabco-surfactants for transdermal liposomal formulations

In this study, we report the relationship between structure, self-assembly behavior and antimicrobial activity of multicationic gemini surfactants and their successful use as stabilizers of a new liposomal formulation for transdermal drug delivery. New surfactants containing natural moiety 1,4-diazabicyclo[2.2.2]octane with four charges and two hydrophobic chains (n-Dabco-s-Dabco-n, where s = 2, 6, 12 and n = 12, 14, 16, 18) were synthesized. A linear dependence of the CMC decrease, with the increase of the number of carbon atoms in alkyl groups (slope 0.23) was shown. The aggregation numbers of n-Dabco-2-Dabco-n are smaller than 30 and they decrease with increasing alkyl chain length. This is in compliance with the larger surface area per n-Dabco-2-Dabco-n molecule. New liposomal formulations loading Rhodamine B phosphatidylcholine (with mean size about 100 nm and increased zeta potential from -7 ± 2 mV to +55 ± 2 mV) have been successfully stabilized by n-Dabco-s-Dabco-n surfactants. These formulations were designed to improve the bioavailability and skin permeation of loaded compound. The antibacterial activity of Dabco-surfactants was shown to be strongly affected by their structure (alkyl chain length and number of charged nitrogen). 12-Dabco-2-Dabco-12 was the most active (MIC = 0.48, 0.98 and 15.6 µg/mL against S. aureus, B. cereus and E. coli, respectively) without hemolytic activity at 3.1 µg/mL concentration. PC/14-Dabco-2-Dabco-14-liposomes were shown to be the best formulation, with the highest antibacterial activity against Sa (MIC = 7.8 μg‧mL^-1) and lowest cytotoxicity (IC₅₀ > 125). The modification of liposomes by Dabco-surfactants stabilizes the membrane of the vesicles, preventing the release of rhodamine B and impairing the penetration of the dye across Strat-M® membrane. Cellular uptake of rhodamine B-loaded PC/12-Dabco-2-Dabco-12-liposomes was also reported. This is the first example of cationic mixed liposomes containing Dabco-surfactants of potential interest for transdermal drug delivery.

Aggregation determines the selectivity of membrane-active anticancer and antimicrobial peptides: The case of killerFLIP

Host defense peptides selectively kill bacterial and cancer cells (including those that are drug-resistant) by perturbing the permeability of their membranes, without being significantly toxic to the host. Coulombic interactions between these cationic and amphipathic peptides and the negatively charged membranes of pathogenic cells contribute to the selective toxicity. However, a positive charge is not sufficient for selectivity, which can be achieved only by a finely tuned balance of electrostatic and hydrophobic driving forces. A common property of amphipathic peptides is the formation of aggregated structures in solution, but the role of this phenomenon in peptide activity and selectivity has received limited attention. Our data on the anticancer peptide killerFLIP demonstrate that aggregation strongly increases peptide selectivity, by reducing the effective peptide hydrophobicity and thus the affinity towards membranes composed of neutral lipids (like the outer layer of healthy eukaryotic cell membranes). Aggregation is therefore a useful tool to modulate the selectivity of membrane active peptides and peptidomimetics.

Delivery nanosystems based on sterically hindered phenol derivatives containing a quaternary ammonium moiety: Synthesis, cholinesterase inhibition and antioxidant activity

Multitarget ligands (MTL) based on sterically hindered phenol and containing a quaternary ammonium moiety (SHP-n-Q) were synthesized. These compounds are inhibitors of cholinesterases with antioxidant properties. The inhibitory selectivity is 10-fold potent for BChE than for AChE. IC₅₀ of SHP-n-Q for BChE is 20 μM. SHP-n-Q and their nanosystems exhibit more pronounced antioxidant properties than the synthetic antioxidant (hindered phenol, butylated hydroxytoluene). These compounds display a low hemolytic activity against human red blood cells. The nanotechnological approach was used to increase the bioavailability of SHP-n-Q derivatives. For water soluble SHP-n-Q derivative, the self-assembled structures have a size close to 100 nm at critical association concentration (0.01 M). Mixed cationic liposomes based on l-α-phosphatidylcholine and SHP-n-Q of 100 nm diameter were prepared. The stability, encapsulation efficacy and release from liposomes of a model drug, Rhodamine B, depend on the structure of SHP-n-Q. Cationic liposomes based on l-α-phosphatidylcholine and SHP-3-Q show a good stability in time (1year) and a sustained release (>65 h). They are promising templates for the development of anti-Alzheimer MT-drug delivery systems.

Fluorescence Study of Aggregation Behaviour of Cationic Surfactant Carbethopendecinium Bromide and its Comparison with Cetyltrimethylammonium Bromide

The aggregation behaviour of the cationic surfactant carbethopendecinium bromide (Septonex) and cetyltrimethylammonium bromide (CTAB) in aqueous solution was investigated by steady-state and time-resolved fluorescence experiments. Values of critical micelle concentration were obtained from the pyrene emission polarity index. The micellar aggregation numbers for four different concentrations of both surfactants were determined by steady-state and time-resolved fluorescence quenching methods, using pyrene as a probe and cetylpyridinium chloride as a quencher. The results obtained for Septonex were compared with the aggregation parameters of CTAB. Generally, Septonex micelles were formed by a smaller number of surfactant monomers than in the case of CTAB and the critical micelle concentration of Septonex is lower than that of CTAB. Also, the concentration dependence of the micelle aggregation number was found.

The Study of the Aggregated Pattern of TX100 Micelle by Using Solvent Paramagnetic Relaxation Enhancements

TX100 (Triton X-100) is a typical nonionic surfactant that is widely used in biology. However, the detailed aggregated conformation of TX100, such as the boundary between the polar region and the nonpolar region, and the arrangement of hydrophobic chains in micelles, are still controversial. In the manuscript, the aggregation pattern of TX100 has been studied using sPREs (solvent Paramagnetic Relaxation Enhancements)-based NMR (Nuclear Magnetic Resonance spectroscopy). It was found that the average positions of the protons in the TX100 micelle are consistent with those in the multilayer staggered spherical micelle model with the p-tertoctylphenyl groups dispersing in the different layers.

Effect of [Zr(α-PW11O39)2]10− Polyoxometalate on the Self-Assembly of Surfactant Molecules in Water Studied by Fluorescence and DOSY NMR Spectroscopy

The catalytic fragmentation of hydrophobic proteins by polyoxometalates (POMs) requires the presence of surfactants in order to increase the solubility of the protein. Depending on the nature of the surfactant, different effects on the kinetics of protein hydrolysis are observed. As the molecular interactions between the POMs and surfactants in solutions have been scarcely explored, in this study, the interaction between the catalytically active Keggin polyoxometalate [Zr(α-PW11O39)2]10− and four different surfactants—sodium dodecyl sulfate (SDS), dodecyldimethyl(3-sulfopropyl)ammonium (Zw3-12), dodecyldimethyl(3-sulfopropyl) ammonium (CHAPS), and polyethylene glycol tert-octylphenyl ether (TX-100)—have been studied in aqueous media. The effect of polyoxometalate on the self-assembly of surfactant molecules into micelles and on the critical micellar concentration (CMC) has been examined by fluorescence spectroscopy and diffusion ordered NMR spectroscopy (DOSY).

Critical aggregates concentration of fatty esters present in biodiesel determined by turbidity and fluorescence

Biodiesel for combustible engine is available as mixture of fossil diesel and fatty esters obtained by transesterification of vegetable oils. The use of biodiesel reduces the amount of SO_x, mainly. However, it was already observed that biodiesel has a different behavior in environment in cases of accidental spill and groundwater contamination. It was noticed that the biodegradation of hydrocarbons (cyclic and aliphatic) in the presence of biodiesel are speeded, although the mechanism is still unclear. Considering the chemical structure of fatty esters, it was investigated the formation of aggregates in water solution by fatty esters present in commercial biodiesel. In Brazil, biodiesel is composed by 95% of fossil diesel and 5% of fatty esters mixture. In this work, fatty esters were treated as neutral surfactant, i.e., it was treated as a molecule with polar and non-polar part. Turbidity and fluorescence were used to determine the critical aggregates concentration (CAC). Water solutions containing fatty esters were examined exploiting changes in turbidity and fluorescence intensity of pyrene. Abrupt changes were attributed to aggregates formation, following the same behavior of traditional amphiphilic compounds. It was determined the CAC for ethyl palmitate, ethyl stearate, ethyl oleate, and ethyl linoleate. The values of CAC for fatty esters varied from 1.91 to 4.27 μmol/L, while CAC for the mixture of esters (biodiesel) was 2.01 for methyl esters and 1.19 for ethyl esters, both prepared using soybean oil. The aggregates formation was also determined by fluorescence measurements considering the changes in intensity of peaks I and III of pyrene. Pyrene senses the changes in environment polarity. The values found of CAC by fluorescence for individual ethyl esters varied from 1.85 to 3.21 μmol/L, while mixtures of ethyl esters was 2.23 and 2.07 μmol/L for mixture of methyl esters. The results clearly showed that fatty esters form aggregates and might be responsible for speed degradation of compounds by accommodation of them in inner part of aggregates.

Nanostructured DPA-MPC-DPA triblock copolymer gel for controlled drug release of ketoprofen and spironolactone

OBJECTIVE

Uncontrolled rapid release of drugs can reduce their therapeutic efficacy and cause undesirable toxicity; however, controlled release from reservoir materials helps overcome this issue. The aims of this study were to determine the release profiles of ketoprofen and spironolactone from a pH-responsive self-assembling DPA-MPC-DPA triblock copolymer gel and elucidate underlying physiochemical properties.

METHODS

Drug release profiles from DPA₅₀ -MPC₂₅₀ -DPA₅₀ gel (pH 7.5), over 32 h (37 °C), were determined using UV-Vis spectroscopy. Nanoparticle size was measured by dynamic light scattering (DLS) and critical micelle concentration (CMC) by pyrene fluorescence. Polymer gel viscosity was examined via rheology, nanoparticle morphology investigated using scanning transmission electron microscopy (STEM) and the gel matrix observed using cryo-scanning electron microscopy (Cryo-SEM).

KEY FINDINGS

DPA₅₀ -MPC₂₅₀ -DPA₅₀ copolymer (15% w/v) formed a free-standing gel (pH 7.5) that controlled drug release relative to free drugs. The copolymer possessed a low CMC, nanoparticle size increased with copolymer concentration, and DLS data were consistent with STEM. The gel displayed thermostable viscosity at physiological temperatures, and the gel matrix was a nanostructured aggregation of smaller nanoparticles.

CONCLUSIONS

The DPA₅₀ -MPC₂₅₀ -DPA₅₀ copolymer gel could be used as a drug delivery system to provide the controlled drug release of ketoprofen and spironolactone.

Substituted Polyesters by Thiol-Ene Modification: Rapid Diversification for Therapeutic Protein Stabilization

Many proteins, especially those used as therapeutics, are unstable to storage and shipping temperatures, leading to increased costs in research and industry. Therefore, the design and synthesis of novel stabilizers is an important area of investigation. Herein we report new degradable polymers that stabilize proteins to environmental stressors such as refrigeration and elevated temperature. Specifically, polycaprolactones with different pendant groups were synthesized and surveyed for their ability to stabilize an important therapeutic protein to storage and shipping conditions. Ring-opening polymerization (ROP) of an allyl-substituted caprolactone monomer was carried out using the organocatalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) to yield a well-defined, alkene-substituted degradable polymer, which was used as a common backbone to control for the degree of polymerization. Relevant side chains such as trehalose, lactose, glucose, carboxybetaine, and oligo(ethylene glycol) were installed via postpolymerization thiol-ene reactions. These degradable polymers were then employed as excipients for the stabilization of the therapeutic protein granulocyte colony-stimulating factor (G-CSF) against storage at 4 °C and shipping temperatures of 60 °C. The best stabilization was observed using the trehalose- and zwitterion- substituted polyesters. Both the trehalose- and carboxybetaine-substituted pCL were further investigated with regard to molecular weight dependence, and it was found that the molecular weight was minimally important for stabilization to refrigeration, but critical for G-CSF stabilization at elevated temperatures. Both high performing zwitterionic and trehalose polyesters were also degraded, and the polymers and degradation products were shown to be noncytotoxic. This work provides potential biocompatible polymers for stabilization of the important therapeutic G-CSF, as well as a general platform for the future discovery of new polymeric protein stabilizers.

Interaction of nonionic detergents with the specific sites of lysozyme amyloidogenic region - inhibition of amyloid fibrillization

Two nonionic detergents, Triton X-100 (TX-100) and n-dodecyl-β-d-maltoside (DDM) were tested for their ability to affect lysozyme amyloid aggregation. We have demonstrated that fibrillization of lysozyme is completely inhibited by low sub-micellar concentrations of both of these detergents. The apparent IC₅₀ values were calculated to be 22μM and 26μM for TX-100 and DDM, respectively. The detergent/protein ratio is not the only parameter controlling inhibition. The precise timing of the detergent addition was found to be also crucial. It appears that the primary inhibitory activity of detergents resulted from inhibition of nuclei formation, in addition to inhibition of fibril polymerization at the early stage of protofibrils growth. The docking study revealed that Asn-59, Trp-63 and Ala-107, all present within the lysozyme amyloidogenic region, were involved in the interaction with both detergents. In addition, TX-100 also interacted with Gln-57 and Asp-103 within lysozyme. Moreover, based on our computational results, TX-100 bridges the Gln-57 and Ala-107 amino acids of the amyloidogenic segment of lysozyme and therefore inhibits more effectively the amyloid fibril formation. Along these lines, the knowledge gained from our study indicates that the detergents or their derivatives may be applicable as a promising strategy for the modulation of lysozyme protein aggregation.

Structuration in the interface of direct and reversed micelles of sucrose esters, studied by fluorescent techniques

BACKGROUND

Reactors found in nature can be described as micro-heterogeneous systems, where media involved in each micro-environment can behave in a markedly different way compared with the properties of the bulk solution. The presence of water molecules in micro-organized assemblies is of paramount importance for many chemical processes, ranging from biology to environmental science. Self-organized molecular assembled systems are frequently used to study dynamics of water molecules because are the simplest models mimicking biological membranes. The hydrogen bonds between sucrose and water molecules are described to be stronger (or more extensive) than the ones between water molecules themselves. In this work, we studied the capability of sucrose moiety, attached to alkyl chains of different length, as a surface blocking agent at the water-interface and we compared its properties with those of polyethylenglycol, a well-known agent used for this purposes. Published studies in this topic mainly refer to the micellization process and the stability of mixed surfactant systems using glycosides. We are interested in the effect induced by the presence of sucrose monoesters at the interface (direct and reverse micelles) and at the palisade (mixtures with Triton X-100). We believe that the different functional group (ester), the position of alkyl chain (6-O) and the huge capability of sucrose to interact with water will dramatically change the water structuration at the interface and at the palisade, generating new possibilities for technological applications of these systems.

RESULTS

Our time resolved and steady state fluorescence experiments in pure SEs micelles show that sucrose moieties are able to interact with a high number of water molecules promoting water structuration and increased viscosity. These results also indicate that the barrier formed by sucrose moieties on the surface of pure micelles is more effective than the polyoxyethylene palisade of Triton X-100. The fluorescence quenching experiments of SEs at the palisade of Triton X-100 micelles indicate a blocking effect dependent on the number of methylene units present in the hydrophobic tail of the surfactant. A remarkable blocking effect is observed when there is a match in size between the hydrophobic regions forming the apolar core (lauryl SE/ Triton X-100). This blocking effect disappears when a mismatch in size between hydrophobic tails, exists due to the disturbing effect on the micelle core.

Tyloxapol niosomes as prospective drug delivery module for antiretroviral drug nevirapine

With the aim of assuring more patient compliant pharmacotherapy for acquired immuno deficiency syndrome, a formulation of the first line anti-retroviral drug, nevirapine (NVP), has been developed by encapsulating it within niosomes. Biocompatible niosomes were fabricated using a biological surfactant, tyloxapol, with variable cholesterol concentrations. Formulation with surfactant/cholesterol molar ratio 1:0.1 exhibits maximum stability and optimum hydrophobicity. Thus, it is most suitable for the entrapment of NVP and has high entrapment efficiency of 94.3%. FTIR and DSC results indicate that NVP has sufficient compatibility with the excipients of the formulation. Photoluminescence quenching measurements were employed to elucidate the position of drug molecules in niosome bilayer along with the partition coefficient. Dissolution results indicate that the efflux of drug is sustained which creates a depot effect and decreases the fluctuations in drug release. Such a versatile and improved formulation of NVP is expected to increase its therapeutic index and alleviate toxic systemic side effects while improving the quality of life and duration of survival of the patients.

Fluorescence emission of pyrene in surfactant solutions

The systematic description of the complex photophysical behaviour of pyrene in surfactant solutions in combination with a quantitative model for the surfactant concentrations reproduces with high accuracy the steady-state and the time resolved fluorescence intensity of pyrene in surfactant solutions near the cmc, both in the monomer and in the excimer emission bands. We present concise model equations that can be used for the analysis of the pyrene fluorescence intensity in order to estimate fundamental parameters of the pyrene-surfactant system, such as the binding equilibrium constant K of pyrene to a given surfactant micelle, the rate constant of excimer formation in micelles, and the equilibrium constant of pyrene-surfactant quenching. The values of the binding equilibrium constant K(TX100)=3300·10³ M⁻¹ and K(SDS)=190·10³ M⁻¹ for Triton X-100 (TX100) and SDS micelles, respectively, show that the partition of pyrene between bulk water and micelles cannot be ignored, even at relatively high surfactant concentrations above the cmc. We apply the model to the determination of the cmc from the pyrene fluorescence intensity, especially from the intensity ratio at two vibronic bands in the monomer emission or from the ratio of excimer to monomer emission intensity. We relate the finite width of the transition region below and above the cmc with the observed changes in the pyrene fluorescence in this region.

Thermodynamics of Micellization of Triton X-100 in Aqueous Glycine: Tensiometric and Ultrasonic Studies

Surface tension and compressibility behavior of p-(1,1,3,3-tetramethylbutyl) phenoxypoly(oxyethylene glycol) (Triton X-100, TX-100) in aqueous mixture of glycine (Gly) have been studied at 298.15, 303.15, 308.15, and 313.15 K below and above the micellar composition range. Critical micelle concentration, cmc, of the surfactant TX-100 was obtained by surface tension, γ, density, ρ, and ultrasonic velocity, u, measurements at different temperatures. From the surface tension data, the surface excess concentration, Γ  max  σ , minimum area per molecule, A  min , Gibbs free energy, ΔG mic 0, enthalpy, ΔH mic 0, and entropy, ΔS mic 0 of micelle formation have been evaluated. Apparent molar adiabatic compressibility, κ ϕ , was calculated from density and ultrasonic velocity data. The values of κ ϕ and apparent molar adiabatic compressibility at infinite dilution, κ ϕ 0, in the pre-micellar region and apparent molar compressibility upon micellization, Δκ ϕ m , were obtained. The observed cmc of TX-100 in aqueous glycine is found to be smaller than its value in pure water. A comparison of Γ  max  σ in aqueous glycine with that in pure water suggests higher adsorption of TX-100 molecules at the air–liquid interface in the former solvent than in the latter one. This was attributed to the highly hydrophilic nature of glycine molecules, causing dehydration of the surfactant molecules, thereby, facilitating the adsorption of TX-100 molecules at the air–liquid interface in the presence of glycine than in its absence. The calculated values of the Gordon parameter, G parameter, suggest that aqueous glycine acts as a good solvent for the micellization of TX-100 amphiphiles. Negative values of ΔG mic 0 and ΔH mic 0 indicate that the process of micellization of the surfactant is spontaneous and exothermic. Moreover, higher values of − TΔS mic 0 than those of ΔH mic 0 truly endorse the view that micellization of TX-100 in aqueous glycine is primarily governed by the entropy gain due to the transfer of hydrophobic groups of the surfactant from the solvent environment to the interior of the micelle. The trends in the behavior of the compressibility parameters also endorse the micellization of TX-100 in aqueous glycine.