Population and coherence transfer induced by double frequency sweeps in half-integer quadrupolar spin systems

High-resolution heteronuclear correlations between spin-1/2 and half-integer quadrupolar nuclei under fast MAS solid-state NMR

High isotropic resolution is essential for the structural elucidation of samples with multiple sites. In this study, utilizing the benefits of TRAPDOR-based heteronuclear multiple quantum coherence (T-HMQC) and a pair of one rotor period long cosine amplitude modulated low-power (cos-lp) pulse-based symmetric-split-t1 multiple-quantum magic angle spinning (MQMAS) methods, we have developed a proton-detected 2D 35Cl/1H T-HMQC-MQMAS pulse sequence under fast MAS (70 kHz) to achieve high-resolution in the indirect dimension of the spin-3/2 (35Cl) nuclei connected via protons. As T-HMQC polarizes not only single-quantum central transition (SQCT) but also triple-quantum (TQ) coherences, the proposed 2D pulse sequence is implemented via selection of two coherence pathways (SQCT→TQ →SQCT and TQ → SQCT→TQ) resulting in the 35Cl isotropic dimension and is superior to the existing double-quantum satellite-transition (DQST) T-HMQC in terms of resolution.

Cation Distribution and Anion Transport in the La3Ga5-xGe1+xO14+0.5x Langasite Structure

Exploration of compositional disorder using conventional diffraction-based techniques is challenging for systems containing isoelectronic ions possessing similar coherent neutron scattering lengths. Here, we show that a multinuclear solid-state Nuclear Magnetic Resonance (NMR) approach provides compelling insight into the Ga3+/Ge4+ cation distribution and oxygen anion transport in a family of solid electrolytes with langasite structure and La3Ga5-xGe1+xO14+0.5x composition. Ultrahigh field 71Ga Magic Angle Spinning (MAS) NMR experiments acquired at 35.2 T offer striking resolution enhancement, thereby enabling clear detection of Ga sites in different coordination environments. Three-connected GaO4, four-connected GaO4 and GaO6 polyhedra are probed for the parent La3Ga5GeO14 structure, while one additional spectral feature corresponding to the key (Ga,Ge)2O8 structural unit which forms to accommodate the interstitial oxide ions is detected for the Ge4+-doped La3Ga3.5Ge2.5O14.75 phase. The complex spectral line shapes observed in the MAS NMR spectra are reproduced very accurately by the NMR parameters computed for a symmetry-adapted configurational ensemble that comprehensively models site disorder. This approach further reveals a Ga3+/Ge4+ distribution across all Ga/Ge sites that is controlled by a kinetically governed cation diffusion process. Variable temperature 17O MAS NMR experiments up to 700 °C importantly indicate that the presence of interstitial oxide ions triggers chemical exchange between all oxygen sites, thereby enabling atomic-scale understanding of the anion diffusion mechanism underpinning the transport properties of these materials.

Advanced solid-state NMR spectroscopy and its applications in zeolite chemistry

Solid-state NMR spectroscopy (ssNMR) can provide details about the structure, host-guest/guest-guest interactions and dynamic behavior of materials at atomic length scales. A crucial use of ssNMR is for the characterization of zeolite catalysts that are extensively employed in industrial catalytic processes. This review aims to spotlight the recent advancements in ssNMR spectroscopy and its application to zeolite chemistry. We first review the current ssNMR methods and techniques that are relevant to characterize zeolite catalysts, including advanced multinuclear and multidimensional experiments, in situ NMR techniques and hyperpolarization methods. Of these, the methodology development on half-integer quadrupolar nuclei is emphasized, which represent about two-thirds of stable NMR-active nuclei and are widely present in catalytic materials. Subsequently, we introduce the recent progress in understanding zeolite chemistry with the aid of these ssNMR methods and techniques, with a specific focus on the investigation of zeolite framework structures, zeolite crystallization mechanisms, surface active/acidic sites, host-guest/guest-guest interactions, and catalytic reaction mechanisms.

Well-Defined Ti Surface Sites in Ziegler-Natta Pre-Catalysts from 47/49Ti Solid-State Nuclear Magnetic Resonance Spectroscopy

Treatment of Ziegler-Natta (ZN) catalysts with BCl3 improves their activity by increasing the number of active sites. Here we show how 47/49Ti solid-state nuclear magnetic resonance (NMR) spectroscopy enables us to understand the electronic structure of the Ti surface sites present in such treated ZN pre-catalysts, prior to activation with alkyl aluminum. High-field (21.1 T) and low-temperature (∼100 K) NMR augmented by DFT modeling on the pre-catalyst and corresponding molecular analogues enables the detection of 47/49Ti NMR signatures and a molecular level understanding of the electronic structure of Ti surface sites. The associated Ti surface sites exhibit 49Ti NMR signatures (δiso, exp = -170 ppm; CQ, exp = 9.3 MHz; κ = 0.05) corresponding to well-defined fully chlorinated hexacoordinated Ti sites adsorbed on a distorted surface of the MgCl2 support, formed upon post-treatment with BCl3 and removal of the alkoxo ligands, paralleling the increased polymerization activity.

Of Glasses and Crystals: Mitigating the Deactivation of CaO-Based CO2 Sorbents through Calcium Aluminosilicates

CaO-based sorbents are cost-efficient materials for high-temperature CO2 capture, yet they rapidly deactivate over carbonation-regeneration cycles due to sintering, hindering their utilization at the industrial scale. Morphological stabilizers such as Al2O3 or SiO2 (e.g., introduced via impregnation) can improve sintering resistance, but the sorbents still deactivate through the formation of mixed oxide phases and phase segregation, rendering the stabilization inefficient. Here, we introduce a strategy to mitigate these deactivation mechanisms by applying (Al,Si)Ox overcoats via atomic layer deposition onto CaCO3 nanoparticles and benchmark the CO2 uptake of the resulting sorbent after 10 carbonation-regeneration cycles against sorbents with optimized overcoats of only alumina/silica (+25%) and unstabilized CaCO3 nanoparticles (+55%). 27Al and 29Si NMR studies reveal that the improved CO2 uptake and structural stability of sorbents with (Al,Si)Ox overcoats is linked to the formation of glassy calcium aluminosilicate phases (Ca,Al,Si)Ox that prevent sintering and phase segregation, probably due to a slower self-diffusion of cations in the glassy phases, reducing in turn the formation of CO2 capture-inactive Ca-containing mixed oxides. This strategy provides a roadmap for the design of more efficient CaO-based sorbents using glassy stabilizers.

NMR Signatures and Electronic Structure of Ti Sites in Titanosilicalite-1 from Solid-State 47/49Ti NMR Spectroscopy

Although titanosilicalite-1 (TS-1) is among the most successful oxidation catalysts used in industry, its active site structure is still debated. Recent efforts have mostly focused on understanding the role of defect sites and extraframework Ti. Here, we report the ^47/49Ti signature of TS-1 and molecular analogues [Ti(OTBOS)₄] and [Ti(OTBOS)₃(OⁱPr)] using novel MAS CryoProbe to enhance the sensitivity. While the dehydrated TS-1 displays chemical shifts similar to those of molecular homologues, confirming the tetrahedral environment of Ti consistent with X-ray absorption spectroscopy, it is associated with a distribution of larger quadrupolar coupling constants, indicating an asymmetric environment. Detailed computational studies on cluster models highlights the high sensitivity of the NMR signatures (chemical shift and quadrupolar coupling constant) to small local structural changes. These calculations show that, while it will be difficult to distinguish mono- vs dinuclear sites, the sensitivity of the ^47/49Ti NMR signature should enable distinguishing the Ti location among specific T site positions.

Frequency swept pulses for the enhanced resolution of ENDOR spectra detecting on higher spin transitions of Gd(III)

Half-Integer High Spin (HIHS) systems with zero-field splitting (ZFS) parameters below 1 GHz are generally dominated by the spin |─1/2>→|+1/2 > central transition (CT). Accordingly, most pulsed Electron Paramagnetic Resonance (EPR) experiments are performed at this position for maximum sensitivity. However, in certain cases it can be desirable to detect higher spin transitions away from the CT in such systems. Here, we describe the use of frequency swept Wideband, Uniform Rate, Smooth Truncation (WURST) pulses for transferring spin population from the CT, and other transitions, of Gd(III) to the neighbouring higher spin transition |─3/2>→|─1/2 > at Q- and W-band frequencies. Specifically, we demonstrate this approach to enhance the sensitivity of ¹H Mims Electron-Nuclear Double Resonance (ENDOR) measurements on two model Gd(III) aryl substituted 1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid (DO3A) complexes, focusing on transitions other than the CT. We show that an enhancement factor greater than 2 is obtained for both complexes at Q- and W-band frequencies by the application of two polarising pulses prior to the ENDOR sequence. This is in agreement with simulations of the spin dynamics of the system during WURST pulse excitation. The technique demonstrated here should allow more sensitive experiments to be measured away from the CT at higher operating temperatures, and be combined with any relevant pulse sequence.

Active Site Descriptors from 95Mo NMR Signatures of Silica-Supported Mo-Based Olefin Metathesis Catalysts

The olefin metathesis activity of silica-supported molybdenum oxides depends strongly on metal loading and preparation conditions, indicating that the nature and/or amounts of the active sites vary across compositionally similar catalysts. This is illustrated by comparing Mo-based (pre)catalysts prepared by impregnation (2.5-15.6 wt % Mo) and a model material (2.3 wt % Mo) synthesized via surface organometallic chemistry (SOMC). Analyses of FTIR, UV-vis, and Mo K-edge X-ray absorption spectra show that these (pre)catalysts are composed predominantly of similar isolated Mo dioxo sites. However, they exhibit different reaction properties in both liquid and gas-phase olefin metathesis with the SOMC-derived catalyst outperforming a classical catalyst of a similar Mo loading by ×1.5-2.0. Notably, solid-state ⁹⁵Mo NMR analyses leveraging state-of-the-art high-field (28.2 T) measurement conditions resolve four distinct surface Mo dioxo sites with distributions that depend on the (pre)catalyst preparation methods. The intensity of a specific deshielded ⁹⁵Mo NMR signal, which is most prominent in the SOMC-derived catalyst, is linked to reducibility and catalytic activity. First-principles calculations show that ⁹⁵Mo NMR parameters directly manifest the local strain and coordination environment: acute (SiO-Mo(O)₂-OSi) angles and low coordination numbers at Mo lead to highly deshielded ⁹⁵Mo chemical shifts and small quadrupolar coupling constants, respectively. Natural chemical shift analyses relate the ⁹⁵Mo NMR signature of strained species to low LUMO energies, which is consistent with their high reducibility and corresponding reactivity. The ⁹⁵Mo chemical shifts of supported Mo dioxo sites are thus linked to their specific electronic structures, providing a powerful descriptor for their propensity toward reduction and formation of active sites.

Pushing the limit of MQMAS for low-γ quadrupolar nuclei in pharmaceutical hydrochlorides

Solid-state NMR of quadrupolar nuclei such as 35Cl has become a useful tool to characterize polymorphism in pharmaceutical hydrochlorides. The two-dimensional multiple-quantum magic-angle spinning (MQMAS) experiment can achieve isotropic resolution, and separate quadrupolar line shapes for samples with multiple sites but the pulse sequence efficiency is often low, limiting applications due to the intrinsically low NMR signals and rf field from the low gyromagnetic ratios γ. The use of cosine low-power MQMAS pulse sequences and high magnetic fields is presented to push the limit of MQMAS for insensitive low-γ quadrupolar nuclei. The improved efficiency and fields up to 35.2 T enable the acquisition of MQMAS spectra for pharmaceutical samples with multiple 35Cl sites, large quadrupolar couplings and/or in diluted dosage forms.

Spin Hyperpolarization in Modern Magnetic Resonance

Magnetic resonance techniques are successfully utilized in a broad range of scientific disciplines and in various practical applications, with medical magnetic resonance imaging being the most widely known example. Currently, both fundamental and applied magnetic resonance are enjoying a major boost owing to the rapidly developing field of spin hyperpolarization. Hyperpolarization techniques are able to enhance signal intensities in magnetic resonance by several orders of magnitude, and thus to largely overcome its major disadvantage of relatively low sensitivity. This provides new impetus for existing applications of magnetic resonance and opens the gates to exciting new possibilities. In this review, we provide a unified picture of the many methods and techniques that fall under the umbrella term "hyperpolarization" but are currently seldom perceived as integral parts of the same field. Specifically, before delving into the individual techniques, we provide a detailed analysis of the underlying principles of spin hyperpolarization. We attempt to uncover and classify the origins of hyperpolarization, to establish its sources and the specific mechanisms that enable the flow of polarization from a source to the target spins. We then give a more detailed analysis of individual hyperpolarization techniques: the mechanisms by which they work, fundamental and technical requirements, characteristic applications, unresolved issues, and possible future directions. We are seeing a continuous growth of activity in the field of spin hyperpolarization, and we expect the field to flourish as new and improved hyperpolarization techniques are implemented. Some key areas for development are in prolonging polarization lifetimes, making hyperpolarization techniques more generally applicable to chemical/biological systems, reducing the technical and equipment requirements, and creating more efficient excitation and detection schemes. We hope this review will facilitate the sharing of knowledge between subfields within the broad topic of hyperpolarization, to help overcome existing challenges in magnetic resonance and enable novel applications.

Exploring the Potential of Multinuclear Solid-State 1 H, 13 C, and 35 Cl Magnetic Resonance To Characterize Static and Dynamic Disorder in Pharmaceutical Hydrochlorides

Crystallographic disorder, whether static or dynamic, can be detrimental to the physical and chemical stability, ease of crystallization and dissolution rate of an active pharmaceutical ingredient. Disorder can result in a loss of manufacturing control leading to batch-to-batch variability and can lengthen the process of structural characterization. The range of NMR active nuclei makes solid-state NMR a unique technique for gaining nucleus-specific information about crystallographic disorder. Here, we explore the use of high-field ³⁵ Cl solid-state NMR at 23.5 T to characterize both static and dynamic crystallographic disorder: specifically, dynamic disorder occurring in duloxetine hydrochloride (1), static disorder in promethazine hydrochloride (2), and trifluoperazine dihydrochloride (3). In all structures, the presence of crystallographic disorder was confirmed by ¹³ C cross-polarization magic-angle spinning (CPMAS) NMR and supported by GIPAW-DFT calculations, and in the case of 3, ¹ H solid-state NMR provided additional confirmation. Applying ³⁵ Cl solid-state NMR to these compounds, we show that higher magnetic fields are beneficial for resolving the crystallographic disorder in 1 and 3, while broad spectral features were observed in 2 even at higher fields. Combining the data obtained from ¹ H, ¹³ C, and ³⁵ Cl NMR, we show that 3 exhibits a unique case of disorder involving the ⁺ N-H hydrogen positions of the piperazinium ring, driving the chloride anions to occupy three distinct sites.

Quadrupolar Isotope-Correlation Spectroscopy in Solid-State NMR

Quadrupolar solid-state NMR carries a wealth of structural information, including insights about chemical environments arising through the determination of local coupling parameters. Current methods can successfully resolve these parameters for individual sites using sample-spinning methods techniques applicable to quadrupolar I ≥ 1 nuclei, provided second-order central transition broadenings do not exceed by much the spinning rate. For large quadrupolar coupling (C Q) values, however, static acquisitions are often preferable, leading to challenges in extracting local structural information. This study explores the use of two-dimensional QUadrupolar Isotope Correlation SpectroscopY (QUICSY) experiments as a means to increase the NMR spectral resolution and enrich the characterization of quadrupolar NMR patterns under static conditions. QUICSY seeks to correlate the solid-state NMR powder line shapes for two quadrupolar isotopes belonging to the same element via a 2D experiment. In general, two isotopes of the same element will have different nuclear quadrupole moments, gyromagnetic ratios, and spin numbers but essentially identical chemical environments. The possibility then arises of obtaining sharp "ridges" in these 2D correlations, even in static samples showing large quadrupolar effects, which lead to second-order line shapes that are several kilohertz wide. Moreover, pairs of quadrupolar isotopes are recurrent in the periodic table and include important elements such as 35,37Cl, 69,71Ga, 79,81Br, and 85,87Rb. The potential of this approach is explored theoretically and experimentally on two rubidium-containing salts: RbClO4 and Rb2SO4. We find that each compound gives rise to distinctive 2D QUICSY line shapes, depending on the quadrupolar and chemical shift anisotropy (CSA) parameters of its sites. These experimental line shapes show good agreement with analytically derived 2D spectra relying on literature values of the quadrupolar and CSA tensors of these compounds. The approach underlined here paves the way toward better characterization of wideline NMR spectra of quadrupolar nuclei possessing different nuclear isotopes.

From Operando Raman Mechanochemistry to "NMR Crystallography": Understanding the Structures and Interconversion of Zn-Terephthalate Networks Using Selective 17O-Labeling

The description of the formation, structure, and reactivity of coordination networks and metal-organic frameworks (MOFs) remains a real challenge in a number of cases. This is notably true for compounds composed of Zn2+ ions and terephthalate ligands (benzene-1,4-dicarboxylate, BDC) because of the difficulties in isolating them as pure phases and/or because of the presence of structural defects. Here, using mechanochemistry in combination with operando Raman spectroscopy, the observation of the formation of various zinc terephthalate compounds was rendered possible, allowing the distinction and isolation of three intermediates during the ball-milling synthesis of Zn3(OH)4(BDC). An "NMR crystallography" approach was then used, combining solid-state NMR (1H, 13C, and 17O) and density functional theory (DFT) calculations to refine the poorly described crystallographic structures of these phases. Particularly noteworthy are the high-resolution 17O NMR analyses, which were made possible in a highly efficient and cost-effective way, thanks to the selective 17O-enrichment of either hydroxyl or terephthalate groups by ball-milling. This allowed the presence of defect sites to be identified for the first time in one of the phases, and the nature of the H-bonding network of the hydroxyls to be established in another. Lastly, the possibility of using deuterated precursors (e.g., D2O and d 4-BDC) during ball-milling is also introduced as a means for observing specific transformations during operando Raman spectroscopy studies, which would not have been possible with hydrogenated equivalents. Overall, the synthetic and spectroscopic approaches developed herein are expected to push forward the understanding of the structure and reactivity of other complex coordination networks and MOFs.

A 43 Ca nuclear magnetic resonance perspective on octacalcium phosphate and its hybrid derivatives

⁴³ Ca nuclear magnetic resonance (NMR) spectroscopy has been extensively applied to the detailed study of octacalcium phosphate (OCP), Ca₈ (HPO₄ )₂ (PO₄ )₄ .5H₂ O, and hybrid derivatives involving intercalated metabolic acids (viz., citrate, succinate, formate, and adipate). Such phases are of importance in the development of a better understanding of bone structure. High-resolution ⁴³ Ca magic angle spinning (MAS) experiments, including double-rotation (DOR) ⁴³ Ca NMR, as well as ⁴³ Ca{¹ H} rotational echo DOR (REDOR) and ³¹ P{⁴³ Ca} REAPDOR NMR spectra, were recorded on a ⁴³ Ca-labeled OCP phase at very high magnetic field (20 T), and complemented by ab initio calculations of NMR parameters using the Gauge-Including Projector Augmented Wave-density functional theory (GIPAW-DFT) method. This enabled a partial assignment of the eight inequivalent Ca²⁺ sites of OCP. Natural-abundance ⁴³ Ca MAS NMR spectra were then recorded for the hybrid organic-inorganic derivatives, revealing changes in the ⁴³ Ca lineshape. In the case of the citrate derivative, these could be interpreted on the basis of computational models of the structure. Overall, this study highlights the advantages of combining high-resolution ⁴³ Ca NMR experiments and computational modeling for studying complex hybrid biomaterials.

Through-space 11 B-27 Al correlation: Influence of the recoupling channel

Through-space heteronuclear correlation (D-HETCOR) experiments based on heteronuclear multiple-quantum correlation (D-HMQC) and refocused insensitive nuclei enhanced by polarization transfer (D-RINEPT) sequences have been proven to be useful approaches for the detection of the spatial proximity between half-integer quadrupolar nuclei in solids under magic-angle spinning (MAS) conditions. The corresponding pulse sequences employ coherence transfers mediated by heteronuclear dipolar interactions, which are reintroduced under MAS by radiofrequency irradiation of only one of the two correlated nuclei. We investigate herein using numerical simulations of spin dynamics and solid-state NMR experiments on magnesium aluminoborate glass how the choice of the channel to which the heteronuclear dipolar recoupling is applied affects the transfer efficiency of D-HMQC and D-RINEPT sequences between ¹¹ B and ²⁷ Al nuclei. Experimental results show that maximum transfer efficiency is achieved when the recoupling scheme is applied to the channel, for which the spin magnetization is parallel to the B₀ axis in average.

A novel multinuclear solid-state NMR approach for the characterization of kidney stones

The spectroscopic study of pathological calcifications (including kidney stones) is extremely rich and helps to improve the understanding of the physical and chemical processes associated with their formation. While Fourier transform infrared (FTIR) imaging and optical/electron microscopies are routine techniques in hospitals, there has been a dearth of solid-state NMR studies introduced into this area of medical research, probably due to the scarcity of this analytical technique in hospital facilities. This work introduces effective multinuclear and multidimensional solid-state NMR methodologies to study the complex chemical and structural properties characterizing kidney stone composition. As a basis for comparison, three hydrates (n = 1 , 2 and 3) of calcium oxalate are examined along with nine representative kidney stones. The multinuclear magic angle spinning (MAS) NMR approach adopted investigates the 1 H , 13 C , 31 P and 31 P nuclei, with the 1 H and 13 C MAS NMR data able to be readily deconvoluted into the constituent elements associated with the different oxalates and organics present. For the first time, the full interpretation of highly resolved 1 H NMR spectra is presented for the three hydrates, based on the structure and local dynamics. The corresponding 31 P MAS NMR data indicates the presence of low-level inorganic phosphate species; however, the complexity of these data make the precise identification of the phases difficult to assign. This work provides physicians, urologists and nephrologists with additional avenues of spectroscopic investigation to interrogate this complex medical dilemma that requires real, multitechnique approaches to generate effective outcomes.

IRMOF-74(n)-Mg: a novel catalyst series for hydrogen activation and hydrogenolysis of C-O bonds

Metal-Organic Frameworks (MOFs) that catalyze hydrogenolysis reactions are rare and there is little understanding of how the MOF, hydrogen, and substrate molecules interact. In this regard, the isoreticular IRMOF-74 series, two of which are known catalysts for hydrogenolysis of aromatic C-O bonds, provides an unusual opportunity for systematic probing of these reactions. The diameter of the 1D open channels can be varied within a common topology owing to the common secondary building unit (SBU) and controllable length of the hydroxy-carboxylate struts. We show that the first four members of the IRMOF-74(Mg) series are inherently catalytic for aromatic C-O bond hydrogenolysis and that the conversion varies non-monotonically with pore size. These catalysts are recyclable and reusable, retaining their crystallinity and framework structure after the hydrogenolysis reaction. The hydrogenolysis conversion of phenylethylphenyl ether (PPE), benzylphenyl ether (BPE), and diphenyl ether (DPE) varies as PPE > BPE > DPE, consistent with the strength of the C-O bond. Counterintuitively, however, the conversion also follows the trend IRMOF-74(III) > IRMOF-74(IV) > IRMOF-74(II) > IRMOF-74(I), with little variation in the corresponding selectivity. DFT calculations suggest the unexpected behavior is due to much stronger ether and phenol binding to the Mg(ii) open metal sites (OMS) of IRMOF-74(III), resulting from a structural distortion that moves the Mg2+ ions toward the interior of the pore. Solid-state 25Mg NMR data indicate that both H2 and ether molecules interact with the Mg(ii) OMS and hydrogen-deuterium exchange reactions show that these MOFs activate dihydrogen bonds. The results suggest that both confinement and the presence of reactive metals are essential for achieving the high catalytic activity, but that subtle variations in pore structure can significantly affect the catalysis. Moreover, they challenge the notion that simply increasing MOF pore size within a constant topology will lead to higher conversions.

Interstitial Oxide Ion Conductivity in the Langasite Structure: Carrier Trapping by Formation of (Ga,Ge)2O8 Units in La3Ga5-x Ge1+x O14+x/2 (0 < x ≤ 1.5)

Framework oxides with the capacity to host mobile interstitial oxide anions are of interest as electrolytes in intermediate temperature solid oxide fuel cells (SOFCs). High performance materials of this type are currently limited to the anisotropic oxyapatite and melilite structure types. The langasite structure is based on a corner-shared tetrahedral network similar to that in melilite but is three-dimensionally connected by additional octahedral sites that bridge the layers by corner sharing. Using low-temperature synthesis, we introduce interstitial oxide charge carriers into the La₃Ga_5-x Ge_1+x O_14+x/2 langasites, attaining a higher defect content than reported in the lower dimensional oxyapatite and melilite systems in La₃Ga_3.5Ge_2.5O_14.75 (x = 1.5). Neutron diffraction and multinuclear solid state ¹⁷O and ⁷¹Ga NMR, supported by DFT calculations, show that the excess oxygen is accommodated by the formation of a (Ge,Ga)₂O₈ structural unit, formed from a pair of edge-sharing five-coordinated Ga/Ge square-based pyramidal sites bridged by the interstitial oxide and a strongly displaced framework oxide. This leads to more substantial local deformations of the structure than observed in the interstitial-doped melilite, enabled by the octahedral site whose primary coordination environment is little changed by formation of the pair of square-based pyramids from the originally tetrahedral sites. AC impedance spectroscopy on spark plasma sintered pellets showed that, despite its higher interstitial oxide content, the ionic conductivity of the La₃Ga_5-x Ge_1+x O_14+x/2 langasite family is lower than that of the corresponding melilites La_1+y Sr_1-y Ga₃O_7+y/2. The cooperative structural relaxation that forms the interstitial-based (Ga,Ge)₂O₈ units stabilizes higher defect concentrations than the single-site GaO₅ trigonal bipyramids found in melilite but effectively traps the charge carriers. This highlights the importance of controlling local structural relaxation in the design of new framework electrolytes and suggests that the propensity of a framework to form extended units around defects will influence its ability to generate high mobility interstitial carriers.

Sensitivity improvement in 5QMAS NMR experiments using FAM-N pulses

The multiple-quantum magic-angle spinning (MQMAS) experiment is a popular choice for obtaining high-resolution solid-state NMR spectra of quadrupolar nuclei with half-integer spin quantum number. However, its inherently poor sensitivity limits its application in more challenging systems. In particular, the use of higher-order multiple-quantum coherences, which have the potential to provide higher resolution in the isotropic spectrum, results in a further decrease in sensitivity. Here we extend our recent work, which introduced an automated, high-throughput approach to generate amplitude-modulated composite pulses (termed FAM-N) to improve the efficiency of the conversion of three-quantum coherences, and explore the use of similar pulses in five-quantum MAS experiments. We consider three different approaches, and are able to demonstrate that all three provide good enhancements over single pulse conversion in all but the most extreme cases, and work well at a range of spinning rates. We show that FAM-N pulses are robust to variation in the quadrupolar coupling and rf nutation rate, demonstrating their applicability in multisite systems and systems where direct experimental optimisation of complex composite pulses is not feasible. This work will ease the implementation of higher-order MQMAS experiments and enable their application to materials and systems that were previously deemed too difficult to study.

Single-Crystal NMR Characterization of Halogen Bonds

Oxygen-17-enriched triphenylphosphine oxide and three of its halogen-bonded cocrystals featuring 1,4-diiodotetrafluorobenzene and 1,3,5-trifluoro-2,4,6-triiodobenzene as halogen bond donors have been characterized by ³¹P and ¹⁷O single-crystal NMR spectroscopy. Single-crystal NMR allows for the measurement of not only the magnitudes of various NMR interaction tensors, but also their orientations relative to the crystal lattice and therefore relative to the halogen bonds themselves. ³¹P chemical shift tensors, ¹⁷O chemical shift tensors, ¹⁷O quadrupolar coupling tensors, and ³¹P-¹⁷O indirect nuclear spin-spin (J) coupling tensors are reported here for P═O···I halogen bonds. The angular deviations in the directions of the pseudo-unique components of the ³¹P chemical shift tensors, the ¹⁷O chemical shift tensors, and the ¹⁷O quadrupolar coupling tensors from the direction of the oxygen-iodine halogen bond correlate with the deviations in linearity of the P═O···I halogen bond. There is also a clear decrease in anisotropy and an increase in asymmetry of the J(³¹P,¹⁷O) coupling tensors attributable to the formation of iodine-oxygen halogen bonds. The small but quantifiable changes in the tensors are consistent with the weak nature of these halogen bonds relative to the P═O motif. Overall, this work establishes single-crystal NMR as a novel probe of halogen bonds in solids. Analysis of the results has provided insights into the correlations between the magnitude and orientation of various NMR interaction tensors and the local geometry of the halogen bond. Gauge-including projector-augmented wave computations corroborate the experimental findings.

Recent advances in solid-state nuclear magnetic resonance spectroscopy of exotic nuclei

We present a review of recent advances in solid-state nuclear magnetic resonance (SSNMR) studies of exotic nuclei. Exotic nuclei may be spin-1/2 or quadrupolar, and typically have low gyromagnetic ratios, low natural abundances, large quadrupole moments (when I > 1/2), or some combination of these properties, generally resulting in low receptivities and/or prohibitively broad line widths. Some nuclides are little studied for other reasons, also rendering them somewhat exotic. We first discuss some of the recent progress in pulse sequences and hardware development which continues to enable researchers to study new kinds of materials as well as previously unfeasible nuclei. This is followed by a survey of applications to a wide range of exotic nuclei (including e.g., ⁹Be, ²⁵Mg, ³³S, ³⁹K, ⁴³Ca, ^47/49Ti, ⁵³Cr, ⁵⁹Co, ⁶¹Ni, ⁶⁷Zn, ⁷³Ge, ⁷⁵As, ⁸⁷Sr, ¹¹⁵In, ¹¹⁹Sn, ^121/123Sb, ^135/137Ba, ^185/187Re, ²⁰⁹Bi), most of them quadrupolar. The scope of the review is the past ten years, i.e., 2007-2017.

Oxo- and Oxofluoroaluminates in the RbF-Al2O3 System: Synthesis and Structural Characterization

Precise research on the RbF-Al₂O₃ system was carried out by means of combining X-ray powder diffraction, high-field solid-state NMR spectroscopy, and thermal analysis methods. α-Rb₃AlF₆, RbAlO₂, Rb₂Al₂₂O₃₄, and new phase, Rb₂Al₂O₃F₂, were identified in the system. The structure of this new rubidium oxofluoroaluminate was determined. It is built up from single layers of oxygen-connected AlO₃F tetrahedra, those layers beeing separated by fluorine atoms. This type of structure exhibits a decent ionic conductivity at ambient temperature, 1.74 × 10^-6 S cm^-1. The similar structural arrangement of O₃Al-O-AlO₃ and FO₂Al-O-AlO₂F tetrahedra of the conduction planes in Rb₂Al₂₂O₃₄ and Rb₂Al₂O₃F₂ were confirmed by ²⁷Al NMR measurements. A thermal analysis of the RbF-Al₂O₃ system revealed that it can be defined as a pseudobinary subsystem of the more general quaternary RbF-AlF₃-Al₂O₃-Rb₂O phase diagram. From a phase analysis of individual phase fields, the mutual metastable behavior of all founded phases can be considered. It was observed that fluoro- and oxoaluminates exist together. Rb₂Al₂O₃F₂ is more stable under high temperature. Rubidium fluoro- and oxoaluminates are metastable precursors of the thermodynamically more stable structure of rubidium oxofluoroaluminate.

Cost-effective 17O enrichment and NMR spectroscopy of mixed-metal terephthalate metal-organic frameworks

17O solid-state NMR spectroscopy is employed to investigate the cation disorder in metal-organic frameworks containing two different types of metal cations. Although NMR offers exquisite sensitivity to the local, atomic-scale structure, making it an ideal tool for the characterisation of disordered materials, the low natural abundance of 17O (0.037%) necessitates expensive isotopic enrichment to acquire spectra on a reasonable timescale. Using dry gel conversion and a novel steaming method we show that cost-effective and atom-efficient enrichment of MOFs is possible, and that high-resolution 17O NMR spectra are sensitive both to the structural forms of the MOF and the presence of guest molecules. For mixed-metal forms of MIL-53, NMR can also provide information on the final composition of the materials (notably different to that of the initial starting material) and the preference for cation clustering/ordering within the MOFs. For Al, Ga MIL-53, the distribution of cations results in a mixed-pore form upon exposure to water, unlike the different structures seen for the corresponding end members. This work shows that as good levels of enrichment can be achieved at reasonable cost, 17O NMR spectroscopy should be an invaluable tool for the study of these important functional materials.

(Oxo)(Fluoro)-Aluminates in KF-Al2O3 System: Thermal Stability and Structural Correlation

Precise investigation of part of the phase diagram of KF-Al₂O₃ system was performed in an experiment combining different techniques. Solidified mixtures of KF-Al₂O₃ were studied by X-ray powder diffraction and high-field solid-state NMR spectroscopy over a wide range of compositions. To help with the interpretation of the NMR spectra of the solidified samples found as complex admixtures, we synthesized the following pure compounds: KAlO₂, K₂Al₂₂O₃₄, α-K₃AlF₆, KAlF₄, and K₂Al₂O₃F₂. These compounds were then characterized using various solid-state NMR techniques, including MQ-MAS and D-HMQC. NMR parameters of the pure compounds were finally determined using first-principles density functional theory calculations. The phase diagram of KF-Al₂O₃ with the alumina content up to 30 mol % was determined by means of thermal analysis. Thermal analysis was also used for the description of the thermal stability of one synthesized compound, K₂Al₂O₃F₂.

Interfacial Ca2+ environments in nanocrystalline apatites revealed by dynamic nuclear polarization enhanced 43Ca NMR spectroscopy

The interfaces within bones, teeth and other hybrid biomaterials are of paramount importance but remain particularly difficult to characterize at the molecular level because both sensitive and selective techniques are mandatory. Here, it is demonstrated that unprecedented insights into calcium environments, for example the differentiation of surface and core species of hydroxyapatite nanoparticles, can be obtained using solid-state NMR, when combined with dynamic nuclear polarization. Although calcium represents an ideal NMR target here (and de facto for a large variety of calcium-derived materials), its stable NMR-active isotope, calcium-43, is a highly unreceptive probe. Using the sensitivity gains from dynamic nuclear polarization, not only could calcium-43 NMR spectra be obtained easily, but natural isotopic abundance 2D correlation experiments could be recorded for calcium-43 in short experimental time. This opens perspectives for the detailed study of interfaces in nanostructured materials of the highest biological interest as well as calcium-based nanosystems in general.

Adsorption of benzoxaboroles on hydroxyapatite phases

Benzoxaboroles are a family of molecules that are finding an increasing number of applications in the biomedical field, particularly as a "privileged scaffold" for the design of new drugs. Here, for the first time, we determine the interaction of these molecules with hydroxyapatites, in view of establishing (i) how benzoxaborole drugs may adsorb onto biological apatites, as this could impact on their bioavailability, and (ii) how apatite-based materials can be used for their formulation. Studies on the adsorption of the benzoxaborole motif (C7H7BO2, referred to as BBzx) on two different apatite phases were thus performed, using a ceramic hydroxyapatite (HAceram) and a nanocrystalline hydroxyapatite (HAnano), the latter having a structure and composition more similar to the one found in bone mineral. In both cases, the grafting kinetics and mechanism were studied, and demonstration of the surface attachment of the benzoxaborole under the form of a tetrahedral benzoxaborolate anion was established using (11)B solid state NMR (including (11)B-(31)P correlation experiments). Irrespective of the apatite used, the grafting density of the benzoxaborolates was found to be low, and more generally, these anions demonstrated a poor affinity for apatite surfaces, notably in comparison with other anions commonly found in biological media, such as carboxylates and (organo)phosphates. The study was then extended to the adsorption of a molecule with antimicrobial and antifungal properties (3-piperazine-bis(benzoxaborole)), showing, on a more general perspective, how hydroxyapatites can be used for the development of novel formulations of benzoxaborole drugs.

STATEMENT OF SIGNIFICANCE

Benzoxaboroles are an emerging family of molecules which have attracted much attention in the biomedical field, notably for the design of new drugs. However, the way in which these molecules, once introduced in the body, may interact with bone mineral is still unknown, and the possibility of associating benzoxaboroles to calcium phosphates for drug-formulation purposes has not been looked into. Here, we describe the first study of the adsorption of benzoxaboroles on hydroxyapatite, which is the main mineral phase present in bone. We describe the mode of grafting of benzoxaboroles on this material, and show that they only weakly bind to its surface, especially in comparison to other ionic species commonly found in physiological media, such as phosphates and carboxylates. This demonstrates that administered benzoxaborole drugs are unlikely to remain adsorbed on hydroxyapatite surfaces for long periods of time, which means that their biodistribution will not be affected by such phenomena. Moreover, this work shows that the formulation of benzoxaborole drugs by association to calcium phosphates like hydroxyapatite will lead to a rapid release of the molecules.

From crystalline to amorphous calcium pyrophosphates: A solid state Nuclear Magnetic Resonance perspective

Hydrated calcium pyrophosphates (CPP, Ca2P2O7·nH2O) are a fundamental family of materials among osteoarticular pathologic calcifications. In this contribution, a comprehensive multinuclear NMR (Nuclear Magnetic Resonance) study of four crystalline and two amorphous phases of this family is presented. (1)H, (31)P and (43)Ca MAS (Magic Angle Spinning) NMR spectra were recorded, leading to informative fingerprints characterizing each compound. In particular, different (1)H and (43)Ca solid state NMR signatures were observed for the amorphous phases, depending on the synthetic procedure used. The NMR parameters of the crystalline phases were determined using the GIPAW (Gauge Including Projected Augmented Wave) DFT approach, based on first-principles calculations. In some cases, relaxed structures were found to improve the agreement between experimental and calculated values, demonstrating the importance of proton positions and pyrophosphate local geometry in this particular NMR crystallography approach. Such calculations serve as a basis for the future ab initio modeling of the amorphous CPP phases.

STATEMENT OF SIGNIFICANCE

The general concept of NMR crystallography is applied to the detailed study of calcium pyrophosphates (CPP), whether hydrated or not, and whether crystalline or amorphous. CPP are a fundamental family of materials among osteoarticular pathologic calcifications. Their prevalence increases with age, impacting on 17.5% of the population after the age of 80. They are frequently involved or associated with acute articular arthritis such as pseudogout. Current treatments are mainly directed at relieving the symptoms of joint inflammation but not at inhibiting CPP formation nor at dissolving these crystals. The combination of advanced NMR techniques, modeling and DFT based calculation of NMR parameters allows new original insights in the detailed structural description of this important class of biomaterials.

17O MAS NMR studies of oxo-based olefin metathesis catalysts: a critical assessment of signal enhancement methods

We assessed the DFS parameters for robust and optimal signal enhancement in ¹⁷O NMR studies of silica-supported catalysts.

35Cl solid-state NMR spectroscopy of HCl pharmaceuticals and their polymorphs in bulk and dosage forms

Herein, we demonstrate the use of 35Cl SSNMR for the structural fingerprinting of HCl salts of pharmaceuticals in both bulk and dosage forms.

High sensitivity and resolution in 43Ca solid-state NMR experiments

A thorough investigation of solid-state NMR signal enhancement schemes and high-resolution techniques for application to the spin-7/2 43Ca nuclide are presented. Signal enhancement experiments employing double frequency sweeps, hyperbolic secant pulses, and rotor-assisted population transfer, which manipulate the satellite transitions of half-integer quadrupolar nuclei to polarize the central transition (m = + 1/2 ↔ –1/2), are carried out on four well-characterized 43Ca isotopically enriched calcium salts: Ca(NO3)2, Ca(OD)2, CaSO4·2H2O, and Ca(OAc)2·H2O. These results, in conjunction with numerical simulations of 43Ca NMR spectra under magic-angle spinning conditions, are used to identify the technique that provides the most uniform (or quantitative) polarization enhancement as well as the largest signal enhancement factors independent of size of the 43Ca quadrupolar coupling constant, which is the most significant source of resonance broadening in 43Ca NMR spectra. These samples are further investigated using 43Ca double-rotation NMR spectroscopy to yield isotropic, or solution-like, NMR spectra with exquisite resolution. In addition, three unique calcium sites are resolved for the hemihydrated form of calcium acetate (unknown structure), Ca(OAc)2·0.5H2O, with double-rotation NMR, whereas the more common, but more time-consuming, multiple quantum magic-angle spinning technique only clearly resolves two calcium sites. The results shown herein will be useful for other NMR spectroscopists attempting to acquire 43Ca solid-state NMR data for unknown and more complex materials with a higher degree of both sensitivity and resolution.

A 3D experiment that provides isotropic homonuclear correlations of half-integer quadrupolar nuclei

Two 3D experiments, capable of producing enhanced resolution two-spin double-quantum (DQ) homonuclear correlations for half-integer quadrupolar nuclei, are described. The first uses a split-t1 MQMAS sequence followed by a sandwiched oR(3) symmetry-based dipolar recoupling sequence to directly excite DQ coherences. In this case an isotropic single-quantum (SQ) coherence starts the homonuclear DQ excitation. In the second experiment a single strong pulse is used to create triple quantum (TQ) coherence followed by a further single pulse conversion to zero-order before a non-sandwiched oR(3) DQ sequence. The first experiment is demonstrated using (87)Rb in RbNO3, with three Rb sites in a ∼5ppm range, and the second to (11)B in caesium triborate, CsB3O5, with two three-coordinated sites separated by ∼2ppm and one four-coordinated boron site. In both cases, all sites are clearly resolved and their connections observed. The second experiment has higher sensitivity and a good signal to noise is obtained in a reasonable time despite the long T1 relaxation time of (11)B in this material.

Efficient amplitude-modulated pulses for triple- to single-quantum coherence conversion in MQMAS NMR

The conversion between multiple- and single-quantum coherences is integral to many nuclear magnetic resonance (NMR) experiments of quadrupolar nuclei. This conversion is relatively inefficient when effected by a single pulse, and many composite pulse schemes have been developed to improve this efficiency. To provide the maximum improvement, such schemes typically require time-consuming experimental optimization. Here, we demonstrate an approach for generating amplitude-modulated pulses to enhance the efficiency of the triple- to single-quantum conversion. The optimization is performed using the SIMPSON and MATLAB packages and results in efficient pulses that can be used without experimental reoptimisation. Most significant signal enhancements are obtained when good estimates of the inherent radio-frequency nutation rate and the magnitude of the quadrupolar coupling are used as input to the optimization, but the pulses appear robust to reasonable variations in either parameter, producing significant enhancements compared to a single-pulse conversion, and also comparable or improved efficiency over other commonly used approaches. In all cases, the ease of implementation of our method is advantageous, particularly for cases with low sensitivity, where the improvement is most needed (e.g., low gyromagnetic ratio or high quadrupolar coupling). Our approach offers the potential to routinely improve the sensitivity of high-resolution NMR spectra of nuclei and systems that would, perhaps, otherwise be deemed “too challenging”.

Recent NMR developments applied to organic-inorganic materials

In this contribution, the latest developments in solid state NMR are presented in the field of organic-inorganic (O/I) materials (or hybrid materials). Such materials involve mineral and organic (including polymeric and biological) components, and can exhibit complex O/I interfaces. Hybrids are currently a major topic of research in nanoscience, and solid state NMR is obviously a pertinent spectroscopic tool of investigation. Its versatility allows the detailed description of the structure and texture of such complex materials. The article is divided in two main parts: in the first one, recent NMR methodological/instrumental developments are presented in connection with hybrid materials. In the second part, an exhaustive overview of the major classes of O/I materials and their NMR characterization is presented.

Understanding multi-quantum NMR through secular approximation

With the development of technology and improved understanding of nuclear spin-spin interactions and their behavior in static/oscillating magnetic fields, NMR spectroscopy has emerged as a powerful tool for characterizing molecular structure in a wide range of systems of chemical, physical and biological relevance. Here in this article, we revisit the important connection between "Secular-Approximation" (a well-known fundamental concept) and NMR spectroscopy. Employing recent experimental results as the background, an alternate interpretation of the secular approximation is presented for describing and understanding the nuances of Multi-Quantum (MQ) NMR spectroscopy of quadrupolar nuclei. Since MQ NMR spectroscopy of quadrupolar nuclei forms the basis of the structural characterization of inorganic solids and clusters, we believe that the analytic theory presented herein would be beneficial both in the understanding and design of MQ NMR experiments. Additionally, the analytic results are corroborated with rigorous numerical simulations and could be employed in the quantitative interpretation of experimental results.

Signal enhancement in solid-state NMR of quadrupolar nuclei

Recent progress in the development and application of signal enhancement methods for NMR of quadrupolar nuclei in solids is presented. First, various pulse schemes for manipulating the populations of the satellite transitions in order to increase the signal of the central transition (CT) in stationary and rotating solids are evaluated (e.g., double-frequency sweeps, hyperbolic secant pulses). Second, the utility of the quadrupolar Carr-Purcell-Meiboom-Gill (QCPMG) and WURST-QCPMG pulse sequences for the rapid and efficient acquisition of particularly broad CT powder patterns is discussed. Third, less frequently used experiments involving polarization transfer from abundant nuclear spins (cross-polarization) or from unpaired electrons (dynamic nuclear polarization) are assessed in the context of recent examples. Advantages and disadvantages of particular enhancement schemes are highlighted and an outlook on possible future directions for the signal enhancement of quadrupolar nuclei in solids is offered.

Dynamic nuclear polarization enhanced natural abundance 17O spectroscopy

We show that natural abundance oxygen-17 NMR of solids could be obtained in minutes at a moderate magnetic field strength by using dynamic nuclear polarization (DNP). Electron spin polarization could be transferred either directly to (17)O spins or indirectly via (1)H spins in inorganic oxides and hydroxides using an oxygen-free solution containing a biradical polarization agent (bTbK). The results open up a powerful method for rapidly acquiring high signal-to-noise ratio solid-state NMR spectra of (17)O nuclear spins and to probe sites on or near the surface, without the need for isotope labeling.

Enhancing the central-transition NMR signal of quadrupolar nuclei by spin population transfer using SW-FAM pulse trains with a tangent-shaped sweep profile

Solid-state NMR of quadrupolar nuclei with half-integer spin, such as (25)Mg (I=5/2) or (43)Ca (I=7/2), suffers from low sensitivity, which may be improved using spin population transfer (SPT) from the satellite transitions. Effecting SPT with good efficiency is especially challenging under static conditions, and several techniques such as double-frequency sweeps (DFS), hyperbolic secant pulses (HS) and frequency-swept fast-amplitude modulated pulses (SW-FAM) have been suggested for achieving the necessary manipulations of the satellite transitions. We here investigate the SPT properties of an SW-FAM sequence with a tangent-shaped profile. The new SW(tan)-FAM pulse train is shown to possess superior SPT performance to the SW(1/τ)-FAM sequence, which hitherto has been considered to be the best FAM method for signal enhancement of static spectra, by both numerical simulations on a (27)Al model system, and experimental results on aluminium acetyl acetonate, Al(acac)(3). In addition, the CT enhancement of individual crystallites from the polycrystalline sample with a defined angle between principal z-axis of the diagonal Q-tensor and the external field was considered by numerical simulations. In the vicinity of the magic angle θ(m)=54.7°, a region of zero enhancement exists. Use of the SW(tan)-FAM sequence allows extending the frequency sweep further into this region, with beneficial effects for the overall enhancement and the faithfulness of the line shape. In agreement with previously published studies, our numerical simulations on SPT for single crystals again evidence that the enhancement factors for a polycrystalline sample range from zero enhancement to the maximum gain of 2I, with the total enhancement factor of the full powder pattern being the summation of these strongly varying individual factors. This variation is the cause for line shape distortions in SPT-enhanced spectra. At the same time, these findings prove the capability of frequency sweeps (i.e., DFS and SW-FAM) to fully invert the satellite transitions under certain conditions.

Repetitive sideband-selective double frequency sweeps for sensitivity enhancement of MAS NMR of half-integer quadrupolar nuclei

A sensitivity enhancement scheme aiming at selective adiabatic inversion of a single set of satellite transition sidebands under magic angle spinning has been employed on samples of albite containing a single moderately distorted (27)Al site and zoisite containing two highly distorted octahedral (27)Al sites. Overall enhancements of ∼2.5 for albite and ∼3 for the two AlO(6) sites of zoisite are reported by applying this scheme at different spinning speeds reflecting the versatility of this enhancement scheme which achieves significant signal-to-noise enhancements for the systems with moderately high quadrupolar coupling and high quadrupolar coupling. Repeating the sensitivity enhancement scheme and signal readout several times without allowing for spin-lattice relaxation leads to sensitivity enhancements of factors of ∼4 for albite and ∼5 for zoisite which substantially increases the detectability of the quadrupolar sites. The effectiveness of this scheme at high magnetic field under very fast magic angle spinning has been demonstrated. Finally, the possibility of performing spectral editing by selective enhancement of one of the quadrupolar sites in zoisite whilst keeping the other site unaffected has been explored.