Using monomolecular films to characterize lipid lateral interactions

Does deacclimation reverse the changes in structural/physicochemical properties of the chloroplast membranes that are induced by cold acclimation in oilseed rape?

Winter crops acquire frost tolerance during the process of cold acclimation when plants are exposed to low but non-freezing temperatures that is connected to specific metabolic adjustments. Warm breaks during/after cold acclimation disturb the natural process of acclimation, thereby decreasing frost tolerance and can even result in a resumption of growth. This phenomenon is called deacclimation. In the last few years, studies that are devoted to deacclimation have become more important (due to climate changes) and necessary to be able to understand the mechanisms that occur during this phenomenon. In the acclimation of plants to low temperatures, the importance of plant membranes is indisputable; that is why the main aim of our studies was to answer the question of whether (and to what extent) deacclimation alters the physicochemical properties of the plant membranes. The studies were focused on chloroplast membranes from non-acclimated, cold-acclimated and deacclimated cultivars of winter oilseed rape. The analysis of the membranes (formed from chloroplast lipid fractions) using the Langmuir technique revealed that cold acclimation increased membrane fluidity (expressed as the Alim values), while deacclimation generally decreased the values that were induced by cold. Moreover, because the chloroplast membranes were penetrated by lipophilic molecules such as carotenoids or tocopherols, the relationships between the structure of the lipids and the content of these antioxidants in the chloroplast membranes during the process of the cold acclimation and deacclimation of oilseed rape are discussed.

Lipid Specificity of the Fusion of Bacterial Extracellular Vesicles with the Host Membrane

Bacterial membrane vesicles (MVs) facilitate the long-distance delivery of virulence factors crucial for pathogenicity. The entry and trafficking mechanisms of virulence factors inside host cells are recently emerging; however, whether bacterial MVs can fuse and modulate the physicochemical properties of the host lipid membrane and membrane lipid parameter for fusion remains unknown. In this study, we reconstituted the interaction of bacterial MVs with host cell lipid membranes and quantitatively showed that bacterial MV interaction increases the fluidity, dipole potential, and compressibility of a biologically relevant multicomponent host membrane upon fusion. The presence of cylindrical lipids, such as phosphatidylcholine, and a moderate acyl chain length of C16 help the MV interaction. While significant binding of bacterial MVs to the raft-like lipid membranes with phase-separated regions of the membrane was observed, however, MVs prefer binding to the liquid-disordered regions of the membrane. Furthermore, the elevated levels of cholesterol tend to hinder the interaction of bacterial MVs, as evident from the favorable excess Gibbs free energy of mixing bacterial MVs with host lipid membranes. The findings provide new insights that might have implications for the regulation of host machinery by bacterial pathogens through manipulation of the host membrane properties.

Understanding Aβ Peptide Binding to Lipid Membranes: A Biophysical Perspective

Aβ peptides are known to bind neural plasma membranes in a process leading to the deposit of Aβ-enriched plaques. These extracellular structures are characteristic of Alzheimer's disease, the major cause of late-age dementia. The mechanisms of Aβ plaque formation and deposition are far from being understood. A vast number of studies in the literature describe the efforts to analyze those mechanisms using a variety of tools. The present review focuses on biophysical studies mostly carried out with model membranes or with computational tools. This review starts by describing basic physical aspects of lipid phases and commonly used model membranes (monolayers and bilayers). This is followed by a discussion of the biophysical techniques applied to these systems, mainly but not exclusively Langmuir monolayers, isothermal calorimetry, density-gradient ultracentrifugation, and molecular dynamics. The Methodological Section is followed by the core of the review, which includes a summary of important results obtained with each technique. The last section is devoted to an overall reflection and an effort to understand Aβ-bilayer binding. Concepts such as Aβ peptide membrane binding, adsorption, and insertion are defined and differentiated. The roles of membrane lipid order, nanodomain formation, and electrostatic forces in Aβ-membrane interaction are separately identified and discussed.

Effect of cationic dendrimer on membrane mimetic systems in the form of monolayer and bilayer

Interactions between a zwitterionic phospholipid, 1, 2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and four anionic phospholipids dihexadecyl phosphate (DHP), 1, 2-dimyristoyl-sn-glycero-3-phosphoglycerol (DMPG), 1, 2-dipalmitoyl-sn-glycero-3-phosphate (DPP) and 1, 2-dipalmitoyl-sn-glycero-3-phospho ethanol (DPPEth) in combination with an additional amount of 30 mol% cholesterol were separately investigated at air-buffer interface through surface pressure (π) - area (A) measurements. π-A isotherm derived parameters revealed maximum negative deviation from ideality for the mixtures comprising 30 mol% anionic lipids. Besides the film functionality, structural changes of the monomolecular films at different surface pressures in the absence and presence of polyamidoamine (PAMAM, generation 4), a cationic dendrimer, were visualised through Brewster angle microscopy and fluorescence microscopic studies. Fluidity/rigidity of monolayers were assessed by surface dilatational rheology studies. Effect of PAMAM on the formation of adsorbed monolayer, due to bilayer disintegration of liposomes (DPPC:anionic lipids= 7:3 M/M, and 30 mol% cholesterol) were monitored by surface pressure (π) - time (t) isotherms. Bilayer disintegration kinetics were dependent on lipid head group and chain length, besides dendrimer concentration. Such studies are considered to be an in vitro cell membrane model where the alteration of molecular orientation play important roles in understanding the nature of interaction between the dendrimer and cell membrane. Liposome-dendrimer aggregates were nontoxic to breast cancer cell line as well as in doxorubicin treated MDA-MB-468 cell line suggesting their potential as drug delivery systems.

An in silico osmotic pressure approach allows characterization of pressure-area isotherms of lipid monolayers at low molecular areas

Surface pressure-area isotherms of lipid monolayers at the air-water interface provide essential information about the structure and mechanical behaviour of lipid membranes. These curves can be readily obtained through Langmuir trough measurements and, as such, have been collected for decades in the field of membrane biochemistry. However, it is still challenging to directly observe and understand nanoscopic features of monolayers through such experiments, and molecular dynamics (MD) simulations are generally used to provide a molecular view of such interfaces. In MD simulations, the surface pressure-area (Π-A) isotherms are generally computed using the Kirkwood-Irving formula, that relies on the evaluation of the pressure tensor. This approach, however, has intrinsic limitations when the molecular area in the monolayer is low (typically < 60 Ų per lipid). Recently, an alternative method to compute Π-A isotherms of surfactants, based on the calculation of the three-dimensional osmotic pressure via the implementation of semipermeable barriers was proposed. In this work, we investigate the feasibility of this approach for long-chain surfactants such as phospholipids. We identify some discrepancies between the computed values and experimental results, and we propose a semi-empirical correction based on the molecular structure of the surfactants at the monolayer interface. To validate the potential of this new approach, we simulate several phosphatidylcholine and phosphatidylethanolamine lipids at various temperatures using all-atom and coarse-grained force fields, and we compute the corresponding Π-A isotherms. Our results show that the Π-A isotherms obtained using the new method are in very good agreement with experiments and far superior to the canonical pressure tensor-based method at low molecular areas. This corrected osmotic pressure method allows for accurate characterization of the molecular packing in monolayers in various physical phases.

“Interplay of lipid-head group and packing defects in driving Amyloid-beta mediated myelin-like model membrane deformation”

Accumulating evidence suggests that amyloid plaque associated myelin lipid loss as a result of elevated amyloid burden might also contribute to Alzheimer's disease. The amyloid fibrils though closely associated with lipids under physiological conditions, however, the progression of membrane remodeling events leading to lipid-fibril assembly remains unknown. Here we first reconstitute the interaction of Aβ-40 with myelin-like model membrane and show that the binding of Aβ-40 induces extensive tubulation. To look into the mechanism of membrane tubulation we chose a set of membrane conditions varying in lipid packing density and net charge that allows us to dissect the contribution of lipid specificity of Aβ-40 binding, aggregation kinetics, and subsequent changes in membrane parameters such as fluidity, diffusion, and compressibility modulus. We show that the binding of Aβ-40 depends predominantly on the lipid packing defect densities and electrostatic interactions and results in rigidification of the myelin-like model membrane during the early phase of amyloid aggregation. Furthermore, elongation of Aβ-40 into higher oligomeric and fibrillar species leads to eventual fluidization of the model membrane followed by extensive lipid membrane tubulation observed in the late phase. Taken together, our results capture mechanistic insights into snapshots of temporal dynamics of Aβ-40 - myelin-like model membrane interaction and demonstrate how short timescale, local phenomena of binding, and fibril-mediated load generation results in the consequent association of lipids with growing amyloid fibrils.

Study of Interactions between Saponin Biosurfactant and Model Biological Membranes: Phospholipid Monolayers and Liposomes

The aim of this study was to determine the effect of saponins-rich plant extract on two model biological membranes: phospholipid monolayers and liposomes. The Langmuir monolayer technique was used to study the interactions of model phospholipid membranes with saponins. The π-A isotherms were determined for DPPE (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine) monolayer with the addition of various concentrations of licorice saponins extracts and subjected to qualitative as well as quantitative analysis. Additionally, relaxation studies of the obtained monolayers were carried out and morphological changes were examined using Brewster angle microscopy. Moreover, changes in the structure of phospholipid vesicles treated with solutions of saponins-rich plant extracts were assessed using the FTIR technique. The size and zeta potential of the liposomes were estimated based on DLS methods. The obtained results indicated that the saponins interact with the phospholipid membrane formed by DPPE molecules and that the stability of the mixed DPPE/saponins monolayer strongly depends on the presence of impurities in saponins. Furthermore, it was found that the plant extract rich in saponins biosurfactant interacts mainly with the hydrophilic part of liposomes.

Reorganization of the outer layer of a model of the plasma membrane induced by a neuroprotective aminosterol

Trodusquemine is an amphipathic aminosterol that has recently shown therapeutic benefit in neurodegenerative diseases altering the binding of misfolded proteins to the cell membrane. To unravel the underlying mechanism, we studied the interactions between Trodusquemine (TRO) and lipid monolayers simulating the outer layer of the plasma membrane. We selected two different compositions of dioleoylphosphatidylcholine (DOPC), sphingomyelin (SM), cholesterol (Chol) and monosialotetrahexosylganglioside (GM1) lipid mixture mimicking either a lipid-raft containing membrane (L_d+S_o phases) or a single-phase disordered membrane (L_d phase). Surface pressure-area isotherms and surface compressional modulus-area combined with Brewster Angle Microscopy (BAM) provided the thermodynamic and morphological information on the lipid monolayer in the presence of increasing amounts of TRO in the monolayer. Experiments revealed that TRO forms stable spreading monolayers at the buffer-air interface where it undergoes multiple reversible phase transitions to bi- and tri-layers at the interface. When TRO was spread at the interface with the lipid mixtures, we found that it distributes in the lipid monolayer for both the selected lipid compositions, but a maximum TRO uptake in the rafts-containing monolayer was observed for a Lipid/TRO molar ratio equal to 3:2. Statistical analysis of BAM images revealed that TRO induces a decrease in the size of the condensed domains, an increase in their number and in the thickness mismatch between the L_d and S_o phase. Experiments and MD simulations converge to indicate that TRO adsorbs preferentially at the border of the S_o domains. Removal of GM1 from the lipid L_d+S_o mixture resulted in an even greater TRO-mediated reduction of the size of the S_o domains suggesting that the presence of GM1 hinders the localization of TRO at the S_o domains boundaries. Taken together these observations suggest that Trodusquemine influences the organization of lipid rafts within the neuronal membrane in a dose-dependent manner whereas it evenly distributes in disordered expanded phases of the membrane model.

Nucleic Acid-Loaded Lipid Nanoparticle Interactions with Model Endosomal Membranes

Lipid nanoparticles (LNPs) are important delivery systems for RNA-based therapeutics, yet the mechanism of their interaction with endosomal membranes remains unclear. Here, the interactions of nucleic acid-loaded LNPs that contain an ionizable lipid with models of the early and late endosomal membranes are studied, for the first time, using different reflectometry techniques. Novel insight is provided with respect to the subphase pH, the stage of the endosome, and the nature of the nucleic acid cargo. It is found that the insertion of lipids from the LNPs into the model membrane is greatest at pH 6.5 and 5.5, whereas at higher pH, lipid insertion is suppressed with evidence instead for the binding of intact LNPs, demonstrating the importance of the pH in the fusion of LNPs undergoing the endosomal pathway. Furthermore, and independently of the pH, the effect of the early- versus late-stage endosomal models is minimal, suggesting that the increased fluidity and anionic nature of the late endosome has little effect on the extent of LNP interaction. Last, there is greater nucleic acid delivery from LNPs containing mRNA than Poly(A), indicating that the extent of interaction can be tuned according to the nature of the nucleic acid cargo. Such new information on the relative impact of factors influencing nucleic acid delivery by LNP interactions with endosomal membranes is important in the design and tuning of vehicles with improved nucleic acid delivery capacities.

Biophysical analysis of gelatin and PLGA nanoparticle interactions with complex biomimetic lung surfactant models

Biocompatible materials are increasingly used for pulmonary drug delivery, and it is essential to understand their potential impact on the respiratory system, notably their effect on lung surfactant, a monolayer of lipids and proteins, responsible for preventing alveolar collapse during breathing cycles. We have developed a complex mimic of lung surfactant composed of eight lipids mixed in ratios reported for native lung surfactant. A synthetic peptide based on surfactant protein B was added to better mimic the biological system. This model was used to evaluate the impact of biocompatible gelatin and poly(lactic-co-glycolic acid) nanoparticles. Surface pressure–area isotherms were used to assess lipid packing, film compressibility and stability, whereas the lateral organization was visualized by Brewster angle microscopy. Nanoparticles increased film fluidity and altered the monolayer collapse pressure. Bright protruding clusters formed in their presence indicate a significant impact on the lateral organization of the surfactant film. Altogether, this work indicates that biocompatible materials considered to be safe for drug delivery still need to be assessed for their potential detrimental impact before use in therapeutic applications

Biodegradable nanoparticles drastically alters lateral organization of lung surfactant lipid- peptide model system.

Interfacial behavior of phospholipid monolayers revealed by mesoscopic simulation

A mesoscopic model with molecular resolution is presented for dipalmitoyl phosphatidylcholine (DPPC) and palmitoyl oleoyl phosphatidylcholine (POPC) monolayer simulations at the air-water interface using many-body dissipative particle dynamics (MDPD). The parameterization scheme is rigorously based on reproducing the physical properties of water and alkane and the interfacial property of the phospholipid monolayer by comparison with experimental results. Using much less computing cost, these MDPD simulations yield a similar surface pressure-area isotherm as well as similar pressure-related morphologies as all-atom simulations and experiments. Moreover, the compressibility modulus, order parameter of lipid tails, and thickness of the phospholipid monolayer are quantitatively in line with the all-atom simulations and experiments. This model also captures the sensitive changes in the pressure-area isotherms of mixed DPPC/POPC monolayers with altered mixing ratios, indicating that the model is promising for applications with complex natural phospholipid monolayers. These results demonstrate a significant improvement of quantitative phospholipid monolayer simulations over previous coarse-grained models.

Simple Does Not Mean Trivial: Behavior of Phosphatidic Acid in Lipid Mono- and Bilayers

Phosphatidic acid (PA) is one of the simplest membrane phospholipids, yet it plays a crucial role in various biologically relevant processes that take place in cells. Since PA generation may be triggered by a variety of factors, very often of antagonistic character, the specific nature of physiological responses driven by PA is not clear. In order to shed more light on these issues, we carried out a systematic characterization of membranes containing one of the three biologically significant PA molecular species. The effect of these molecules on the properties of membranes composed of phosphatidylcholine and/or cholesterol was assessed in a multidisciplinary approach, including molecular dynamic simulations, flicker noise spectroscopy, and Langmuir monolayer isotherms. The first enables the determination of various macroscopic and microscopic parameters such as lateral diffusion, membrane thickness, and defect analysis. The obtained data revealed a strong interaction between unsaturated PA species and phosphatidylcholine. On the other hand, the behavior of saturated PA was greatly influenced by cholesterol. Additionally, a strong effect on mechanical properties was observed in the case of three-component systems, which could not be explained by the simple extrapolation of parameters of the corresponding two-component systems. Our data show that various PA species are not equivalent in terms of their influence on lipid mono- and bilayers and that membrane composition/properties, particularly those related to the presence of cholesterol, may strongly modulate PA behavior.

Triglyceride Lenses at the Air-Water Interface as a Model System for Studying the Initial Stage in the Biogenesis of Lipid Droplets

Lipid droplets (LD) are intracellular structures consisting of an apolar lipid core, composed mainly of triglycerides (TG) and steryl esters, coated by a lipid-protein mixed monolayer. The mechanisms underlying LD biogenesis at the endoplasmic reticulum membrane are a matter of many current investigations. Although models explaining the budding-off of protuberances of phase-segregated TG inside bilayers have been proposed recently, the assumption of such initial blisters needs further empirical support. Here, we study mixtures of egg phosphatidylcholine (EPC) and TG at the air-water interface in order to describe some physical properties and topographic stability of TG bulk structures in contact with interfaces. Brewster angle microscopy images revealed the appearance of microscopic collapsed structures (CS) with highly reproducible lateral size (∼1 μm lateral radius) not varying with lateral packing changes and being highly stable at surface pressures (π) beyond collapse. By surface spectral fluorescence microscopy, we were able to characterize the solvatochromism of Nile Red both in monolayers and inside CS. This allowed to conclude that CS corresponded to a phase of liquid TG and to characterize them as lenses forming a three-phase (oil-water-air) system. Thereby, the thicknesses of the lenses could be determined, observing that they were dramatically flattened when EPC was present (6-12 nm compared to 30-50 nm for lenses on EPC/TG and TG films, respectively). Considering the shape of lenses, the interfacial tensions, and the Neumann's triangle, this experimental approach allows one to estimate the oil-water interfacial tension acting at each individual microscopic lens and at varying compression states of the surrounding monolayer. Thus, lenses formed on air-water Langmuir films can serve to assess variables of relevance to the initial step of LD biogenesis, such as the degree of dispersion of excluded-TG phase and shape, spatial distribution, and oil-water interfacial tension of lenses.

Langmuir Monolayer Techniques for the Investigation of Model Bacterial Membranes and Antibiotic Biodegradation Mechanisms

The amounts of antibiotics of anthropogenic origin released and accumulated in the environment are known to have a negative impact on local communities of microorganisms, which leads to disturbances in the course of the biodegradation process and to growing antimicrobial resistance. This mini-review covers up-to-date information regarding problems related to the omnipresence of antibiotics and their consequences for the world of bacteria. In order to understand the interaction of antibiotics with bacterial membranes, it is necessary to explain their interaction mechanism at the molecular level. Such molecular-level interactions can be probed with Langmuir monolayers representing the cell membrane. This mini-review describes monolayer experiments undertaken to investigate the impact of selected antibiotics on components of biomembranes, with particular emphasis on the role and content of individual phospholipids and lipopolysaccharides (LPS). It is shown that the Langmuir technique may provide information about the interactions between antibiotics and lipids at the mixed film surface (π–A isotherm) and about the penetration of the active substances into the phospholipid monolayer model membranes (relaxation of the monolayer). Effects induced by antibiotics on the bacterial membrane may be correlated with their bactericidal activity, which may be vital for the selection of appropriate bacterial consortia that would ensure a high degradation efficiency of pharmaceuticals in the environment.

Quantitative methods to detect phospholipids at the oil-water interface

Phospholipids are the main constituents of cell membranes and act as natural stabilizers of milk fat globules. Phospholipids are used in a wide range of applications, e.g. as emulsifiers in cosmetic, pharmaceutical and food products. While processed emulsion droplets are usually stabilized by a monolayer of phospholipids, cell membranes have a phospholipid bilayer structure and milk fat globules are stabilized by a complex phospholipid trilayer membrane. Despite the broad relevance of phospholipids, there are still many scientific challenges in understanding how their behavior at the fluid-fluid interface affects microstructure, stability, and physico-chemical properties of natural and industrial products. Most of these challenges arise from the experimental difficulties related to the investigation of the molecular arrangement of phospholipids in situ at the fluid-fluid interface and the quantification of their partitioning between the bulk phase and the interface, both under static and flow conditions. This task is further complicated by the presence of other surface-active components, such as proteins, that can interact with phospholipids and compete for space at the interface. Here, we review the methodologies available from the literature to detect and quantify phospholipids, focusing on oil-water interfaces, and highlight current limitations and future perspectives.

Dengue fusion peptide in Langmuir monolayers: A binding parameter study

Membrane fusion is known to be the primary mechanism of entry of flaviviruses into host cells. Several studies reported the investigation of the membrane fusion mechanism mediated by the fusion peptide, a component of the membrane protein surrounding the flaviviruses. In this study, we investigated the interaction of Dengue fusion peptide (FLAg) with Langmuir monolayers to uncover the role of membrane charges and organization in its membrane binding. Binding parameters of FLAg were obtained by measuring its adsorption onto Langmuir monolayers of different types of individual lipids, as well as their mixtures. Specific peptide binding was observed in the presence of charged lipid monolayers at different pHs, revealing that the lipid composition of the membrane modulates peptide interaction, and the preference of the peptide for negatively charged lipids.

Partitioning of Seven Different Classes of Antibiotics into LPS Monolayers Supports Three Different Permeation Mechanisms through the Outer Bacterial Membrane

The outer membrane (OM) of Gram-negative (G-) bacteria presents a barrier for many classes of antibacterial agents. Lipopolysaccharide (LPS), present in the outer leaflet of the OM, is stabilized by divalent cations and is considered to be the major impediment for antibacterial agent permeation. However, the actual affinities of major antibiotic classes toward LPS have not yet been determined. In the present work, we use Langmuir monolayers formed from E. coli Re and Rd types of LPS to record pressure-area isotherms in the presence of antimicrobial agents. Our observations suggest three general types of interactions. First, some antimicrobials demonstrated no measurable interactions with LPS. This lack of interaction in the case of cefsulodin, a third-generation cephalosporin antibiotic, correlates with its low efficacy against G- bacteria. Ampicillin and ciprofloxacin also show no interactions with LPS, but in contrast to cefsulodin, both exhibit good efficacy against G- bacteria, indicating permeation through common porins. Second, we observe substantial intercalation of the more hydrophobic antibiotics, novobiocin, rifampicin, azithromycin, and telithromycin, into relaxed LPS monolayers. These largely repartition back to the subphase with monolayer compression. We find that the hydrophobic area, charge, and dipole all show correlations with both the mole fraction of antibiotic retained in the monolayer at the monolayer-bilayer equivalence pressure and the efficacies of these antibiotics against G- bacteria. Third, amine-rich gentamicin and the cationic antimicrobial peptides polymyxin B and colistin show no hydrophobic insertion but are instead strongly driven into the polar LPS layer by electrostatic interactions in a pressure-independent manner. Their intercalation stably increases the area per molecule (by up to 20%), which indicates massive formation of defects in the LPS layer. These defects support a self-promoted permeation mechanism of these antibiotics through the OM, which explains the high efficacy and specificity of these antimicrobials against G- bacteria.

Lacritin proteoforms prevent tear film collapse and maintain epithelial homeostasis

Lipids in complex, protein-enriched films at air/liquid interfaces reduce surface tension. In the absence of this benefit, the light refracting and immunoprotective tear film on eyes would collapse. Premature collapse, coupled with chronic inflammation compromising visual acuity, is a hallmark of dry eye disease affecting 7 to 10% of individuals worldwide. Although collapse seems independent of mutation (unlike newborn lung alveoli), selective proteome and possible lipidome changes have been noted. These include elevated tissue transglutaminase and consequent inactivation through C-terminal cross-linking of the tear mitogen lacritin, leading to significant loss of lacritin monomer. Lacritin monomer restores homeostasis via autophagy and mitochondrial fusion and promotes basal tearing. Here, we discover that lacritin monomer C-terminal processing, inclusive of cysteine, serine, and metalloproteinase activity, generates cationic amphipathic α-helical proteoforms. Such proteoforms (using synthetic peptide surrogates) act like alveolar surfactant proteins to rapidly bind and stabilize the tear lipid layer. Immunodepletion of C- but not N-terminal proteoforms nor intact lacritin, from normal human tears promotes loss of stability akin to human dry eye tears. Stability of these and dry eye tears is rescuable with C- but not N-terminal proteoforms. Repeated topical application in rabbits reveals a proteoform turnover time of 7 to 33 h with gradual loss from human tear lipid that retains bioactivity without further processing. Thus, the processed C-terminus of lacritin that is deficient or absent in dry eye tears appears to play a key role in preventing tear film collapse and as a natural slow release mechanism that restores epithelial homeostasis.

Supported polymer/lipid hybrid bilayers formation resembles a lipid-like dynamic by reducing the molecular weight of the polymer

Amphiphilic block copolymers form self-assembled bilayers even in combination with phospholipids. They represent an attractive alternative to native lipid-based membrane systems for supported bilayer formation with applications in biomedical research, sensoring and drug delivery. Their enhanced stability and excellent mechanical properties are linked to their higher molecular weight which generates thicker bilayers. Hypothesis: It is hypothesized that reducing the molecular weight of the polymer facilitates the formation of a thinner, more homogeneous polymer/lipid hybrid bilayer which would benefit the formation of supported bilayers on silicon oxide. Experiment: We investigated hybrid bilayers composed of mixtures of 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine and increasing amounts of a low molecular weight polybutadiene-b-polyethylene oxide copolymer (1050 g/mol). By assessing the bilayer thickness and the molecular packing behavior we sought to demonstrate how reducing the polymer molecular weight increases the tendency to form supported hybrid bilayers in a lipid-like manner. Findings: The formation of a supported hybrid bilayers occurs at polymer contents <70 mol% in a lipid-like fashion and is proportional to the cohesive forces between the bilayer components and inversely related to the bilayer hydrophobic core thickness and the extended brush regime of the PEGylated polymeric headgroup.

Combined Effect of Nitrofurantoin and Plant Surfactant on Bacteria Phospholipid Membrane

Due to the increasing use of antibiotics, measures are being taken to improve their removal from the natural environment. The support of biodegradation with natural surfactants that increase the bioavailability of impurities for microorganisms that degrade them, raises questions about their effect on bacterial cells. In this paper we present analysis of the interaction of nitrofurantoin (NFT) and saponins from the Saponaria officinalis on the environmental bacteria membrane and the model phospholipid membrane mimicking it. A wide perspective of the process is provided with the Langmuir monolayer technique and membrane permeability test with bacteria. The obtained results showed that above critical micelle concentration (CMC), saponin molecules are incorporated into the POPE monolayer, but the NFT impact was ambiguous. What is more, differences in membrane permeability between the cells exposed to NFT in comparison to that of the non-exposed cells were observed above 1.0 CMC for Achromobacter sp. KW1 or above 0.5 CMC for Pseudomonas sp. MChB. In both cases, NFT presence lowered the membrane permeability. Moreover, the Congo red adhesion to the cell membrane also decreased in the presence of a high concentration of surfactants and NFT. The results suggest that saponins are incorporated into the bacteria membrane, but their sugar hydrophilic part remains outside, which modifies the adsorption properties of the cell surface as well as the membrane permeability.

Biomimetic Models to Investigate Membrane Biophysics Affecting Lipid-Protein Interaction

Biological membranes are highly dynamic in their ability to orchestrate vital mechanisms including cellular protection, organelle compartmentalization, cellular biomechanics, nutrient transport, molecular/enzymatic recognition, and membrane fusion. Controlling lipid composition of different membranes allows cells to regulate their membrane characteristics, thus modifying their physical properties to permit specific protein interactions and drive structural function (membrane deformation facilitates vesicle budding and fusion) and signal transduction. Yet, how lipids control protein structure and function is still poorly understood and needs systematic investigation. In this review, we explore different in vitro membrane models and summarize our current understanding of the interplay between membrane biophysical properties and lipid-protein interaction, taken as example few proteins involved in muscular activity (dystrophin), digestion and Legionella pneumophila effector protein DrrA. The monolayer model with its movable barriers aims to mimic any membrane deformation while surface pressure modulation imitates lipid packing and membrane curvature changes. It is frequently used to investigate peripheral protein binding to the lipid headgroups. Examples of how lipid lateral pressure modifies protein interaction and organization within the membrane are presented using various biophysical techniques. Interestingly, the shear elasticity and surface viscosity of the monolayer will increase upon specific protein(s) binding, supporting the importance of such mechanical link for membrane stability. The lipid bilayer models such as vesicles are not only used to investigate direct protein binding based on the lipid nature, but more importantly to assess how local membrane curvature (vesicles with different size) influence the binding properties of a protein. Also, supported lipid bilayer model has been used widely to characterize diffusion law of lipids within the bilayer and/or protein/biomolecule binding and diffusion on the membrane. These membrane models continue to elucidate important advances regarding the dynamic properties harmonizing lipid-protein interaction.

Mixed polar-nonpolar lipid films as minimalistic models of Tear Film Lipid Layer: A Langmuir trough and fluorescence microscopy study

The Tear Film Lipid Layer (TFLL) covering the surface of the aqueous film at human cornea forms a first barrier between the eye and environment. Its alterations are related to dry eye disease. TFLL is formed by a complex mixture of lipids, with an excess of nonpolar components and a minor fraction of polar molecules. Its thickness is up to 160 nm, hence a multilayer-like structure of TFLL is assumed. However, details of TFLL organization are mostly unavailable in vivo due to the dynamic nature of the human tear film. To overcome this issue, we employ a minimalistic in vitro lipid model of TFLL. We study its biophysical characteristics by using a combination of the Langmuir trough with fluorescence microscopy. The model consists of two-component polar-nonpolar lipid films with a varying component ratio spread on the aqueous subphase at physiologically relevant temperature. We demonstrate that the model lipid mixture undergoes substantial structural reorganization as a function of lateral pressure and polar to nonpolar lipid ratio. In particular, the film is one-molecule-thick and homogenous under low lateral pressure. Upon compression, it transforms into a multilayer structure with inhomogeneities in the form of polar-nonpolar lipid assemblies. Based on this model, we hypothesize that TFLL in vivo has a duplex polar-nonpolar structure and it contains numerous mixed lipid aggregates formed because of film restructuring. These findings, despite the simplified character of the model, seem relevant for TFLL physiology as well as for understanding pathological conditions related to the lipids of the tear film.

Influence of Ca2+ on the surface behavior of phosphatidic acid and its mixture with diacylglycerol pyrophosphate at different pHs

The signaling lipids phosphatidic acid (PA) and diacylglycerol pyrophosphate (DGPP) are involved in regulating the stress response in plants. PA and DGPP are anionic lipids consisting of a negatively charged phosphomonoester or pyrophosphate group attached to diacylglycerol, respectively. Changes in the pH modulate the protonation of their head groups modifying the interaction with other effectors. Here, we examine in a controlled system how the presence of Ca²⁺ modulates the surface organization of dioleyl diacylglycerol pyrophosphate (DGPP) and its interaction with dioleoyl phosphatidic acid (DOPA) at different pHs. Both lipids formed expanded monolayers at pH 5 and 8. At acid and basic pHs, monolayers formed by DOPA or DGPP became denser when Ca²⁺ was added to the subphase. At pH 5, Ca²⁺ also induced an increase of surface potential of both lipids. Conversely, at pH 8 the effects induced by the presence of Ca²⁺ on the surface potential were reversed. Mixed monolayers of DOPA and DGPP showed a non-ideal behavior. The addition of even tiny amounts of DGPP to DOPA films caused a reduction of the mean molecular area. This effect was more evident at pH 8 compared to pH 5. Our finding suggests that low amounts of DGPP in an film enriched in DOPA could lead to a local increase in film packing with a concomitant change in the local polarization, further regulated by local pH. This fact may have implications for the assigned role of PA as a pH-sensing phospholipid or during its interaction with proteins.

Structural basis of phosphatidylcholine recognition by the C2-domain of cytosolic phospholipase A2α

Ca2+-stimulated translocation of cytosolic phospholipase A2α (cPLA2α) to the Golgi induces arachidonic acid production, the rate-limiting step in pro-inflammatory eicosanoid synthesis. Structural insights into the cPLA2α preference for phosphatidylcholine (PC)-enriched membranes have remained elusive. Here, we report the structure of the cPLA2α C2-domain (at 2.2 Å resolution), which contains bound 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC) and Ca2+ ions. Two Ca2+ are complexed at previously reported locations in the lipid-free C2-domain. One of these Ca2+ions, along with a third Ca2+, bridges the C2-domain to the DHPC phosphate group, which also interacts with Asn65. Tyr96 plays a key role in lipid headgroup recognition via cation-π interaction with the PC trimethylammonium group. Mutagenesis analyses confirm that Tyr96 and Asn65 function in PC binding selectivity by the C2-domain and in the regulation of cPLA2α activity. The DHPC-binding mode of the cPLA2α C2-domain, which differs from phosphatidylserine or phosphatidylinositol 4,5-bisphosphate binding by other C2-domains, expands and deepens knowledge of the lipid-binding mechanisms mediated by C2-domains.

Clearly Detectable, Kinetically Restricted Solid-Solid Phase Transition in cis-Ceramide Monolayers

Sphingosine [(2 S,3 R,4 E)-2-amino-4-octadecene-1,3-diol] is the most common sphingoid base in mammals. Ceramides are N-acyl sphingosines. Numerous small variations on this canonical structure are known, including the 1-deoxy, the 4,5-dihydro, and many others. However, whenever there is a Δ4 double bond, it adopts the trans (or E) configuration. We synthesized a ceramide containing 4 Z-sphingosine and palmitic acid ( cis-pCer) and studied its behavior in the form of monolayers extended on an air-water interface. cis-pCer acted very differently from the trans isomer in that, upon lateral compression of the monolayer, a solid-solid transition was clearly observed at a mean molecular area ≤44 Ų·molecule^-1, whose characteristics depended on the rate of compression. The solid-solid transition, as well as states of domain coexistence, could be imaged by atomic force microscopy and by Brewster-angle microscopy. Atomistic molecular dynamics simulations provided results compatible with the experimentally observed differences between the cis and trans isomers. The data can help in the exploration of other solid-solid transitions in lipids, both in vitro and in vivo, that have gone up to now undetected because of their less obvious change in surface properties along the transition, as compared to cis-pCer.

Psychosine remodels model lipid membranes at neutral pH

β-Galactosylsphingosine or psychosine (PSY) is a single chain sphingolipid with a cationic group, which is degraded in the lysosome lumen by β-galactosylceramidase during sphingolipid biosynthesis. A deficiency of this enzyme activity results in Krabbe's disease and PSY accumulation. This favors its escape to extralysosomal spaces, with its pH changing from acidic to neutral. We studied the interaction of PSY with model lipid membranes in neutral conditions, using phospholipid vesicles and monolayers as classical model systems, as well as a complex lipid mixture that mimics the lipid composition of myelin. At pH 7.4, when PSY is mainly neutral, it showed high surface activity, self-organizing into large structures, probably lamellar in nature, with a CMC of 38 ± 3 μM. When integrated into phospholipid membranes, PSY showed preferential partition into disordered phases, shifting phase equilibrium. The presence of PSY reduces the compactness of the membrane, making it more easily compressible. It also induces lipid domain disruption in vesicles composed of the main myelin lipids. The surface electrostatics of lipid membranes was altered by PSY in a complex manner. A shift to positive zeta potential values evidenced its presence in the vesicles. Furthermore, the increase of surface potential and surface water structuring observed may be a consequence of its location at the interface of the positively charged layer. As Krabbe's disease is a demyelinating process, PSY alteration of the membrane phase state, lateral lipid distribution and surface electrostatics appears important to the understanding of myelin destabilization at the supramolecular level.

Biophysical and biochemical strategies to understand membrane binding and pore formation by sticholysins, pore-forming proteins from a sea anemone

Actinoporins constitute a unique class of pore-forming toxins found in sea anemones that are able to bind and oligomerize in membranes, leading to cell swelling, impairment of ionic gradients and, eventually, to cell death. In this review we summarize the knowledge generated from the combination of biochemical and biophysical approaches to the study of sticholysins I and II (Sts, StI/II), two actinoporins largely characterized by the Center of Protein Studies at the University of Havana during the last 20 years. These approaches include strategies for understanding the toxin structure-function relationship, the protein-membrane association process leading to pore formation and the interaction of toxin with cells. The rational combination of experimental and theoretical tools have allowed unraveling, at least partially, of the complex mechanisms involved in toxin-membrane interaction and of the molecular pathways triggered upon this interaction. The study of actinoporins is important not only to gain an understanding of their biological roles in anemone venom but also to investigate basic molecular mechanisms of protein insertion into membranes, protein-lipid interactions and the modulation of protein conformation by lipid binding. A deeper knowledge of the basic molecular mechanisms involved in Sts-cell interaction, as described in this review, will support the current investigations conducted by our group which focus on the design of immunotoxins against tumor cells and antigen-releasing systems to cell cytosol as Sts-based vaccine platforms.

Cyclization Improves Membrane Permeation by Antimicrobial Peptoids

The peptidomimetic approach has emerged as a powerful tool for overcoming the inherent limitations of natural antimicrobial peptides, where the therapeutic potential can be improved by increasing the selectivity and bioavailability. Restraining the conformational flexibility of a molecule may reduce the entropy loss upon its binding to the membrane. Experimental findings demonstrate that the cyclization of linear antimicrobial peptoids increases their bactericidal activity against Staphylococcus aureus while maintaining high hemolytic concentrations. Surface X-ray scattering shows that macrocyclic peptoids intercalate into Langmuir monolayers of anionic lipids with greater efficacy than for their linear analogues. It is suggested that cyclization may increase peptoid activity by allowing the macrocycle to better penetrate the bacterial cell membrane.

Sphingolipid transfer proteins defined by the GLTP-fold

Glycolipid transfer proteins (GLTPs) originally were identified as small (~24 kDa), soluble, amphitropic proteins that specifically accelerate the intermembrane transfer of glycolipids. GLTPs and related homologs now are known to adopt a unique, helically dominated, two-layer 'sandwich' architecture defined as the GLTP-fold that provides the structural underpinning for the eukaryotic GLTP superfamily. Recent advances now provide exquisite insights into structural features responsible for lipid headgroup selectivity as well as the adaptability of the hydrophobic compartment for accommodating hydrocarbon chains of differing length and unsaturation. A new understanding of the structural versatility and evolutionary premium placed on the GLTP motif has emerged. Human GLTP-motifs have evolved to function not only as glucosylceramide binding/transferring domains for phosphoinositol 4-phosphate adaptor protein-2 during glycosphingolipid biosynthesis but also as selective binding/transfer proteins for ceramide-1-phosphate. The latter, known as ceramide-1-phosphate transfer protein, recently has been shown to form GLTP-fold while critically regulating Group-IV cytoplasmic phospholipase A2 activity and pro-inflammatory eicosanoid production.

Zn(2+)-dependent surface behavior of diacylglycerol pyrophosphate and its mixtures with phosphatidic acid at different pHs

Diacylglycerol pyrophosphate (DGPP) is a minor lipid that attenuates the phosphatidic acid (PA) signal, and also DGPP itself would be a signaling lipid. Diacylglycerol pyrophosphate is an anionic phospholipid with a pyrophosphate group attached to diacylglycerol that was shown to respond to changes of pH, thus affecting the surface organization of DGPP and their interaction with PA. In this work, we have investigated how the presence of Zn(2+) modulates the surface organization of DGPP and its interaction with PA at acidic and basic pHs. Both lipids formed expanded monolayers at pHs 5 and 8. At pH 5, monolayers formed by DGPP became stiffer when Zn(2+)was added to the subphase, while the surface potential decreased. At this pH, Zn(2+) induced a phase transition from an expanded to a condensed-phase state in monolayers formed by PA. Conversely, at pH 8 the effects induced by the presence of Zn(2+) on the surface behaviors of the pure lipids were smaller. Thus, the interaction of the bivalent cation with both lipids was modulated by pH and by the ionization state of the polar head groups. Mixed monolayers of PA and DGPP showed a non-ideal behavior and were not affected by the presence of Zn(2+) at pH 8. This could be explained considering that when mixed, the lipids formed a closely packed monolayer that could not be further modified by the cation. Our results indicate that DGPP and PA exhibit expanded- and condensed-phase states depending on pH, on the proportion of each lipid in the film and on the presence of Zn(2+). This may have implications for a possible role of DGPP as a signaling lipid molecule.

Surface behavior of sphingomyelins with very long chain polyunsaturated fatty acids and effects of their conversion to ceramides

Molecular species of sphingomyelin (SM) with nonhydroxy (n) and 2-hydroxy (h) very long chain polyunsaturated fatty acids (n- and h-28:4, 30:5, and 32:5) abound in rat spermatogenic cells and spermatozoa. These SMs are located on the sperm head, where they are converted to the corresponding ceramides (Cer) after the completion of the acrosomal reaction, as induced in vitro. The aim of this study was to look into the surface properties of these unique SM species and how these properties change by the SM → Cer conversion. After isolation by HPLC, these SMs were organized in Langmuir films and studied alone, in combination with different proportions of Cer, and during their conversion to Cer by sphingomyelinase. Compression isotherms for all six SMs under study were compatible with a liquid-expanded (LE) state and showed large molecular areas. Only the longest SMs (n-32:5 and h-32:5 SM) underwent a phase transition upon cooling. Interestingly, the abundant h-28:4 Cer exhibited a highly compressible liquid-condensed (LC) phase compatible with a high conformational freedom of Cer molecules but with the characteristic low diffusional properties of the LC phase. In mixed films of h-28:4 SM/h-28:4 Cer, the components showed favorable mixing in the LE phase. The monolayer exhibited h-28:4 Cer-rich domains both in premixed films and when formed by the action of sphingomyelinase on pure h-28:4 SM films. Whereas the SMs from sperm behaved in a way similar to that of shorter acylated SMs, the corresponding Cers showed atypical rheological properties that may be relevant to the membrane structural rearrangements that take place on the sperm head after the completion of the acrosomal reaction.

Nanoscale packing differences in sphingomyelin and phosphatidylcholine revealed by BODIPY fluorescence in monolayers: physiological implications

Phosphatidycholines (PC) with two saturated acyl chains (e.g., dipalmitoyl) mimic natural sphingomyelin (SM) by promoting raft formation in model membranes. However, sphingoid-based lipids, such as SM, rather than saturated-chain PCs have been implicated as key components of lipid rafts in biomembranes. These observations raise questions about the physical packing properties of the phase states that can be formed by these two major plasma membrane lipids with identical phosphocholine headgroups. To investigate, we developed a monolayer platform capable of monitoring changes in surface fluorescence by acquiring multiple spectra during measurement of a lipid force-area isotherm. We relied on the concentration-dependent emission changes of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-labeled PC to detect nanoscale alterations in lipid packing and phase state induced by monolayer lateral compression. The BODIPY-PC probe contained an indacene ring with four symmetrically located methyl (Me) substituents to enhance localization to the lipid hydrocarbon region. Surface fluorescence spectra indicated changes in miscibility even when force-area isotherms showed no deviation from ideal mixing behavior in the surface pressure versus cross-sectional molecular area response. We detected slightly better mixing of Me4-BODIPY-8-PC with the fluid-like, liquid expanded phase of 1-palmitoyl-2-oleoyl-PC compared to N-oleoyl-SM. Remarkably, in the gel-like, liquid condensed phase, Me4-BODIPY-8-PC mixed better with N-palmitoyl-SM than dipalmitoyl-PC, suggesting naturally abundant SMs with saturated acyl chains form gel-like lipid phase(s) with enhanced ability to accommodate deeply embedded components compared to dipalmitoyl-PC gel phase. The findings reveal a fundamental difference in the lateral packing properties of SM and PC that occurs even when their acyl chains match.

Structural properties of POPC monolayers under lateral compression: computer simulations analysis

1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), a lipid comprising a saturated and an unsaturated acyl chain, belongs to the class of glycerophosphatidylcholines, major lipids in eukaryotic cell membranes. To get insight into the structural properties of this lipid within monolayers as membrane models, we performed molecular dynamics (MD) simulations of POPC monolayers under compression at the air/water interface. MD simulations were carried out at 300 K and at different surface pressures using the all-atom general Amber force field (GAFF). A good agreement was found between the simulated data and experimental isotherms. At surface pressures greater than 15 mN/m, two orientations of the head groups clearly appear: one nearly parallel to the monolayer interface and another one pointing toward the water. On the basis of the analysis of headgroup dihedral angles, we propose that the conformational variations around the bonds connecting the phosphorus atom to the adjacent oxygens are involved in these two orientations of the headgroup. The glycerol group orientation is characterized by a large distribution centered around 50° with respect to the monolayer normal. The acyl chains are predominantly in trans configuration from 7.5 to 43 mN/m surface pressures. Moreover, the calculated order parameter profiles of both chains suggest an independent behavior of the saturated and unsaturated chains that could be correlated with the formation of chain-type clusters observed along the simulated trajectories.

Stiffness of lipid monolayers with phase coexistence

The surface dilational modulus--or compressibility modulus--has been previously studied for monolayers composed of pure materials, where a jump in this modulus was related with the onset of percolation as a result of the establishment of a connected structure at the molecular level. In this work, we focused on monolayers composed of two components of low lateral miscibility. Our aim was to investigate the compressibility of mixed monolayers at pressures and compositions in the two-phase region of the phase diagram, in order to analyze the effect of the mechanical properties of each phase on the stiffness of the composite. In nine different systems with distinct molecular dipoles and charges, the stiffness of each phase and the texture at the plane of the monolayer were studied. In this way, we were able to analyze the general compressibility of two-phase lipid monolayers, regardless of the properties of their constituent parts. The results are discussed in the light of the following two hypotheses: first, the stiffness of the composite could be dominated by the stiffness of each phase as a weighted sum according to the percentage of each phase area, regardless of the distribution of the phases in the plane of the monolayer. Alternatively, the stiffness of the composite could be dominated by the mechanical properties of the continuous phase. Our results were better explained by this latter proposal, as in all the analyzed mixtures it was found that the mechanical properties of the percolating phase were the determining factors. The value of the compression modulus was closer to the value of the connected phase than to that of the dispersed phase, indicating that the bidimensional composites displayed mechanical properties that were related to the properties of each phases in a rather complex manner.

Physicochemical and biological characterization of synthetic phosphatidylinositol dimannosides and analogues

Native phosphatidylinositol mannosides (PIMs), isolated from the cell wall of Mycobacterium bovis, and synthetic PIM analogues have been reported to offer a variety of immunomodulating properties, including both suppressive and stimulatory activity. While numerous studies have examined the biological activity of these molecules, the aim of this research was to assess the physicochemical properties at a molecular level and correlate these characteristics with biological activity in a mouse model of airway eosinophilia. To accomplish this, we varied the flexibility and lipophilicity of synthetic PIMs by changing the polar headgroup (inositol- vs glycerol-based core) and the length of the acyl chains of the fatty acid residues (C0, C10, C16, and C18). A series of six phosphatidylinositol dimannosides (PIM2s) and phosphatidylglycerol dimannosides (PGM2s) were synthesized and characterized in this study. Langmuir monolayer studies showed that surface pressure-area (π-A) isotherms were greatly influenced by the length of the lipid acyl chains as well as the steric hindrance and volume of the headgroups. In aqueous solution, lipidated PIM2 and PGM2 compounds were observed to self-assemble into circular aggregates, as confirmed by dynamic light scattering and transmission electron microscopic investigations. Removal of the inositol ring but retention of the three-carbon glycerol unit maintained biological activity. We found that the deacylated PGM2, which did not show self-organization, had no effect on the eosinophil numbers but did have an impact on the expansion of OVA-specific CD4(+) Vα2Vβ5 T cells.

Hg- and Cd-induced modulation of lipid packing and monolayer fluidity in biomimetic erythrocyte model systems

The public health consequences that are associated with the low level exposure of various human populations to Cd(2+) and Hg(2+) are incompletely understood. In order to assess if interactions between these inorganic pollutants and erythrocyte biomembranes may contribute to their chronic toxicity, we have used a Langmuir trough to probe the effect of HgCl2 and CdCl2 on the packing and elasticity properties of biomimetic lipid monolayers using different lipid mixtures. These lipid films were deposited at room temperature on a biologically relevant subphase (1mM phosphate, 100mM NaCl at pH 7.4) in the absence and presence of 100μM HgCl2, CdCl2 and 1:1 mixtures thereof. The interactions of heavy metals with the lipids were monitored as changes in the surface pressure (π)-area (A) isotherms. In addition, metal induced changes to the elastic properties of the model systems were analyzed by area and compressibility data of phosphatidylcholine (PC) systems containing 0, 15, 30, 45 and 100% phosphatidylethanolamine (PE) and phosphatidylserine (PS). These mixtures revealed changes in lateral lipid packing as indicated by area expansion as well as enhanced film rigidity. The results demonstrate that both heavy metals affected the various lipid matrices, but metal mixtures showed the strongest impact. Based on these data, the adverse interaction of Hg(2+) and Cd(2+) with lipid bilayer membranes is identified as a feasible mechanism by which these toxic metals exert toxicity in mammalian cells. Interestingly, these metal interactions were found to depend on the lipid composition.

Oxidized phosphatidylcholines promote phase separation of cholesterol-sphingomyelin domains

Lipid lateral segregation in the plasma membrane is believed to play an important role in cell physiology. Sphingomyelin (SM) and cholesterol (Chol)-enriched microdomains have been proposed as liquid-ordered phase platforms that serve to localize signaling complexes and modulate the intrinsic activities of the associated proteins. We modeled plasma membrane domain organization using Langmuir monolayers of ternary POPC/SM/Chol as well as DMPC/SM/Chol mixtures, which exhibit a surface-pressure-dependent miscibility transition of the coexisting liquid-ordered and -disordered phases. Using Brewster angle microscopy and Langmuir monolayer compression isotherms, we show that the presence of an oxidatively modified phosphatidylcholine, 1-palmitoyl-2-azelaoyl-sn-glydecero-3-phosphocholine, efficiently opposes the miscibility transition and stabilizes micron-sized domain separation at lipid lateral packing densities corresponding to the equilibrium lateral pressure of ∼32 mN/m that is suggested to prevail in bilayer membranes. This effect is ascribed to augmented hydrophobic mismatch induced by the oxidatively truncated phosphatidylcholine. To our knowledge, our results represent the first quantitative estimate of the relevant level of phospholipid oxidation that can potentially induce changes in cell membrane organization and its associated functions.

Surface phase behavior and domain topography of ascorbyl palmitate monolayers

Ascorbyl palmitate (ASC(16)) is a molecule of potential pharmacological interest due to its antioxidant properties and amphiphilic nature. The surface behavior of ASC(16) was studied using Langmuir monolayers and Brewster angle microscopy. This molecule formed stable monolayers at room temperature that showed phase transition from a liquid-expanded to liquid-condensed or crystalline phase, depending on the subphase conditions. Using a theoretical approach, we were able to explain the behavior of the ASC(16) film at different bulk pH values and salt conditions based on the surface pH and the dissociation fraction of the film. Both condensed phases corresponded to highly packed conditions with the crystalline phase occurring at a low charge density, showing molecular tilting and preferential growth at characteristic angles, while the liquid-condensed phase formed in highly charged surfaces revealed small flowerlike domains probably as a consequence of internal dipole repulsion. A smaller perpendicular dipole moment was observed for the crystalline than the liquid-condensed phase which may explain the domain features. In conclusion, ASC(16) showed a complex surface behavior that was highly sensitive to subphase conditions.

Thermodynamic and physical interactions between novel polymeric surfactants and lipids: toward designing stable polymer-lipid complexes

Surfactant amphiphilic macromolecules (AMs) were complexed with a 1:1 ratio of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), either by a coevaporation (CE) or postaddition (PA) method, to form AM-lipid complexes with enhanced drug delivery applications. By characterizing the surfactant-lipid interactions, these heterogeneous drug delivery systems can be better controlled and engineered for optimal therapeutic outcomes. In this study, the physical interactions between DOPE:DOTAP liposomes and AM surfactants were investigated. Langmuir film balance and isothermal calorimetry studies showed cooperative intermolecular interactions between pure lipids and AM in monolayers and high thermostability of structure formed by the addition of AM micelles to DOTAP:DOPE vesicles in buffer solution respectively. Increasing the AM weight ratio in the complexes via the CE method led to complete vesicle solubilization--from lamellar aggregates, to a mixture of coexisting vesicles and micelles, to mixed micelles. Isothermal calorimetry evaluation of AM-lipid complexes shows that, at higher AM weight ratios, PA-produced complexes exhibit greater stability than complexes at lower AM weight ratios. Similar studies show that AM-lipid complexes produced by the CE methods display stronger interactions between AM-lipid components than complexes produced by the PA method. The results suggest that the PA method produces vesicles with AM molecules associated with its outer leaflet only (i.e., an AM-coated vesicle), while the CE method produces complexes ranging from mixed vesicles to mixed micelle in which the AM-lipid components are more intimately associated. These results will be helpful in the design of AM-lipid complexes as structurally defined, stable, and effective drug delivery systems.

Rheological properties of a two phase lipid monolayer at the air/water interface: effect of the composition of the mixture

Many biologically relevant monolayers show coexistence of discrete domains of a long-range ordered condensed phase dispersed in a continuous, disordered, liquid-expanded phase. In this work, we determined the viscous and elastic components of the compressibility modulus and the shear viscosity of monolayers exhibiting phase coexistence with the aim at elucidating the contribution of each phase to the observed monolayer mechanical properties. To this purpose, mixed monolayers with different proportions of distearoylphosphatidylcholine (DSPC) and dimyristoylphosphatidylcholine (DMPC) were prepared and their rheological properties were analyzed. The relationship between the phase diagram of the mixture at 10 mN m(-1) and the rheological properties was studied. We found that the monolayer shear viscosity is highly dependent on the presence of domains and on the domain density. In turn, the monolayer compressibility is only influenced by the presence of domains for high domain densities. For monolayers that look homogeneous on the micrometer scale (DSPC amount lower that 23 mol %), all the analyzed rheological properties remain similar to those observed for pure DMPC monolayers, indicating that in this proportion range the DSPC molecules contribute as DMPC to the surface rheology in spite of having hydrocarbon chains four carbons longer.