Micrococcus luteus strain CGK112 isolated from cow dung demonstrated efficient biofilm-forming ability and degradation potential toward high-density polyethylene (HDPE)

Isolation and characterization of bio-prospecting gut strains Bacillus safensis CGK192 and Bacillus australimaris CGK221 for plastic (HDPE) degradation

The present work reports the application of novel gut strains Bacillus safensis CGK192 (Accession No. OM658336) and Bacillus australimaris CGK221 (Accession No. OM658338) in the biological degradation of synthetic polymer i.e., high-density polyethylene (HDPE). The biodegradation assay based on polymer weight loss was conducted under laboratory conditions for a period of 90 days along with regular evaluation of bacterial biomass in terms of total protein content and viable cells (CFU/cm2). Notably, both strains achieved significant weight reduction for HDPE films without any physical or chemical pretreatment in comparison to control. Hydrophobicity and biosurfactant characterization were also done in order to assess strains ability to form bacterial biofilm over the polymer surface. The post-degradation characterization of HDPE was also performed to confirm degradation using analytical techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Field emission scanning electronic microscopy (FE-SEM) coupled with energy dispersive X-ray (EDX), and Gas chromatography-mass spectrometry (GC-MS). Interestingly strain CGK221 was found to be more efficient in forming biofilm over polymer surface as indicated by lower half-life (i.e., 0.00032 day-1) and higher carbonyl index in comparison to strain CGK192. The findings reflect the ability of our strains to develop biofilm and introduce an oxygenic functional group into the polymer surface, thereby making it more susceptible to degradation.

Microbial degradation of low-density polyethylene (LDPE) and polystyrene using Bacillus cereus (OR268710) isolated from plastic-polluted tropical coastal environment

The study focused on marine bacteria, specifically Bacillus cereus, sourced from heavily polluted coastal areas in Tamil Nadu, aiming to assess their efficacy in degrading low-density polyethylene (LDPE) and polystyrene over a 42-day period. When LDPE and polystyrene films were incubated with Bacillus cereus, they exhibited maximum weight losses of 4.13 ± 0.81 % and 14.13 ± 2.41 %, respectively. Notably, polystyrene exhibited a higher reduction rate (0.0036 day-1) and a shorter half-life (195.29 days). SEM images of the treated LDPE and polystyrene unveiled surface erosion with cracks. The energy dispersive X-ray (EDX) analysis revealed elevated carbon content and the presence of oxygen in the treated LDPE and polystyrene films. The ATR-FTIR spectra exhibited distinctive peaks corresponding to functional groups, with observable peak shifts in the treated films. Notable increases were detected in carbonyl, internal double bond, and vinyl indices across all treated groups. Additionally, both treated LDPE and polystyrene showed reduced crystallinity. This research sheds light on Bacillus cereus (OR268710) biodegradation capabilities, emphasizing its potential for eco-friendly waste management in coastal regions.

Bacterial screening in Indian coastal regions for efficient polypropylene microplastics biodegradation

Polypropylene based medical devices significantly increased production and usage in COVID-19 pandemic states, and this material is very resilient in the environment. Thus, more than ever, rapid action is needed to reduce this pollution. This study focuses on the degradation of polypropylene microplastics (PP MPs) by unique marine bacterial strains obtained from the Thoundi (Bacillus tropicus, Bacillus cereus, Stenotrophomonas acidaminiphila, and Brucella pseudintermedia) and Rameshwaram coasts (Bacillus cereus). Those above five bacterial strains were chosen after preliminary screening of their hydrophobicity, biofilm-forming capabilities, and responsiveness to the zone of clearance technique. During the biodegradation process (28 days), the growth, metabolic activity, and viability of these five isolates were all raised. After the post-biodegradation process, the weight loss percentages of the mentioned bacterial strains treated with PP MPs gradually decreased, with values of 51.5 ± 0.5 %, 47.5 ± 0.5 %, 33 ± 1 %, 28.5 ± 0.5 and 35.5 ± 0.5 %, respectively. UV-Vis DRS and SEM analysis confirmed that bacterial strains adhering to MPs cause cracks and cavities on their surface. The degradation of PP MPs can be inferred from alterations in the FT-IR spectrum, specifically in the carbonyl group range of 1100-1700 cm-1, as well as changes in the 1H NMR spectrum, including chemical shift and proton peak pattern alterations. Bacterial strains facilitated the degradation of PP MPs through the secretion of hydrolase-categorized enzymes of protease, lipase, and esterase. The findings of this study indicate that marine bacteria may possess distinctive characteristics that facilitate the degradation of plastic waste and contribute to environmental conservation.

Production, characterization and in vitro biological activities of crude pigment from endophytic Micrococcus luteus associated with Avicennia marina

Due to their non-toxic and non-carcinogenic nature, biopigments have a phenomenal benefit over synthetic pigments, making them a desirable source for human utilization and a potential alternative to traditional synthetic pigments that are hazardous to the environment and public health. Endosymbiotic interactions between mangrove plants and bacteria could provide an alternate source for the synthesis of unique compounds with potent biomedical applications. Pigmented endophytic bacteria were screened from the explants of Avicennia marina, a mangrove plant, and identified as Micrococcus luteus by molecular characterization. The intracellular pigment was successfully extracted using the sonication-assisted solvent extraction method, and screening factors impacting the pigmentation bioprocess were determined using a one-factor-at-a-time approach. The endophyte produced yellow pigment in the liquid medium, with the maximum growth and pigment production recorded in nutrient broth at 37 ℃ and pH 7 after 96 h of incubation, while the maximum accumulation of pigment was observed in the media supplemented with glucose and tryptone as carbon and nitrogen sources, respectively. The extracted crude pigment was further characterized by ultraviolet, followed by Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry. The obtained crude pigment has been evaluated for its antioxidant and anticancer activity by various assays, such as DPPH radical scavenging activity, FRAP assay, superoxide anion and nitric oxide radical scavenging, metal chelating activity, phosphomolybdenum assay, and MTT assay, respectively, at varying concentrations. The results of our study revealed that the yellow pigment produced by the endophyte showed significant dose-dependent antioxidant and anticancer activity.

Biodegradation of low-density polyethylene (LDPE) through application of indigenous strain Alcaligenes faecalis ISJ128

The resiliency of plastic products against microbial degradation in natural environment often creates devastating changes for humans, plants, and animals on the earth's surface. Biodegradation of plastics using indigenous bacteria may serve as a critical approach to overcome this resulting environmental stress. In the present work, a polyethylene degrading bacterium Alcaligenes faecalis strain ISJ128 (Accession No. MK968769) was isolated from partially degraded polyethylene film buried in the soil at plastic waste disposal site. The biodegradation studies were conducted by employing various methods such as hydrophobicity assessment of the strain ISJ128, measurement of viability and total protein content of bacterial biofilm attached to the polyethylene surface. The proliferation of bacterial cells on polyethylene film, as indicated by high growth response in terms of protein content (85.50 µg mL-1) and viability (1010 CFU mL-1), proposed reasonable suitability of our strain A. faecalis ISJ128 toward polyethylene degradation. The results of biodegradation assay revealed significant degradation (10.40%) of polyethylene film within a short period of time (i.e., 60 days), whereas no signs of degradation were seen in control PE film. A. faecalis strain ISJ128 also demonstrated a removal rate of 0.0018 day-1 along with half-life of 462 days. The scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy studies not only displayed changes on polyethylene surface but also altered level of intensity of functional groups and an increase in the carbonyl indexes justifying the degradation of polyethylene film due to bacterial activity. In addition, the secondary structure prediction (M fold software) of 16SrDNA proved the stable nature of the bacterial strain, thereby reflecting the profound scope of A. faecalis strain ISJ128 as a potential degrader for the eco-friendly disposal of polyethylene waste. Schematic representation of methodology.

Assembly strategies for polyethylene-degrading microbial consortia based on the combination of omics tools and the "Plastisphere"

Numerous microorganisms and other invertebrates that are able to degrade polyethylene (PE) have been reported. However, studies on PE biodegradation are still limited due to its extreme stability and the lack of explicit insights into the mechanisms and efficient enzymes involved in its metabolism by microorganisms. In this review, current studies of PE biodegradation, including the fundamental stages, important microorganisms and enzymes, and functional microbial consortia, were examined. Considering the bottlenecks in the construction of PE-degrading consortia, a combination of top-down and bottom-up approaches is proposed to identify the mechanisms and metabolites of PE degradation, related enzymes, and efficient synthetic microbial consortia. In addition, the exploration of the plastisphere based on omics tools is proposed as a future principal research direction for the construction of synthetic microbial consortia for PE degradation. Combining chemical and biological upcycling processes for PE waste could be widely applied in various fields to promote a sustainable environment.