Simultaneous determination by ultra-performance liquid chromatography–atmospheric pressure chemical ionization time-of-flight mass spectrometry of nitrated and oxygenated PAHs found in air and soot particles

A method for measuring the bioaccessibility of polycyclic aromatic hydrocarbons in cell culture media

Airborne polycyclic aromatic hydrocarbons (PAHs) and their derivatives are of particular concern for population health due to their abundance and toxicity via inhalation. Lung toxicity testing includes exposing lung epithelial cell lines to PAHs in a culture medium containing inorganic species, lipids, proteins, and other biochemicals where the cell response is influenced among others by the toxic chemical accessibility in the medium. While inhalation bioaccessibility of PAHs and other toxicants was previously studied in surrogate lung fluids, studies measuring bioaccessibility in cell culture media are rare. In this work, a method was developed to characterize PAH bioaccessibility in a culture medium used for mouse lung epithelial (FE1) cells. Further, the optimised method was tested using commercially available standard reference material of urban particulate matter (PM) as well as polyurethane foam passive air samplers (PUF-PAS). The method provided a high precision and recovery of analytes, indicating no losses during sample processing and analysis. PAHs had non-linear concentration-responses, with the culture medium approaching saturation with PM concentration of 500 μg mL-1. The results showed that phenanthrene, a 3-ring PAH, was significantly more bioaccessible than ≥4-ring congeners in the culture medium (up to ∼2.5 folds; p < 0.05). Finally, using pre-deployed PUF-PAS from a residential and an industrial site, five PAHs were found in the culture medium, including naphthalene, phenanthrene, anthracene, fluoranthene, and pyrene. This work provides a proof of concept to enable future studies to assess the inhalation bioaccessibility of polycyclic aromatic compounds and other airborne pollutants collected using PUF-PAS.

Evaluation of Mass Spectrometric Methods for Screening Polycyclic Aromatic Hydrocarbons in the Particulate Phase of Wildfire/Biomass Smoke

Polycyclic aromatic hydrocarbons (PAHs) are a class of compounds containing multiple aromatic rings formed during incomplete combustion. Since many of them are known mutagens and carcinogens, PAHs found in the particulate matter (PM) from the wildfire smoke may pose significant health risks to the wildland firefighters. It is pivotal to determine the levels of PAHs in the PM to evaluate the health effects of their inhalation exposure. However, the determination of PAHs using the conventional chromatographic approaches is often time-consuming and laborious. Herein, we describe a novel method for screening nonpolar and polar PAHs in the PM of smoke by direct analysis in real-time mass spectrometry (DART-MS). PM2.5 and PM10 samples were collected on the quartz filters with a sampling system consisting of a cascade impactor with a portable sampling pump. Various indoor and outdoor experiments from biomass burns were conducted to evaluate the PM sampling systems. PAHs were analyzed by DART-MS and gas chromatography-mass spectrometry (GC-MS) methods. The PM samples were collected in California during the wildfire season of fall 2020, and significant levels of multiple nonpolar PAHs and polar PAHs were detected. Overall, the DART-MS method has shown promising ability for high-throughput screening of PAHs in the PM of smoke. Further studies are currently under way to apply this method to study the particulate phase PAH exposures of wildland firefighters during their firefighting activities.

Investigation of PAHs, nitrated PAHs and oxygenated PAHs in PM10 urban aerosols. A comprehensive data analysis

Polycyclic aromatic compounds (PACs) in particulate matter contribute considerably to the health risk of air pollution. As such, we have optimized a method to determine the levels of polycyclic aromatic hydrocarbons, especially nitrated and oxygenated polycyclic aromatic hydrocarbons, in samples of PM₁₀ particulate matter using microwave-assisted extraction (MAE) and gas chromatography coupled to a triple quadrupole mass spectrometer (GC-MS/MS). The proposed method was applied to the analysis of real samples collected in the urban area of Ciudad Real (Spain) during one year. The median total concentrations of eighteen PAHs (∑PAHs) and seven OPAHs (∑OPAHs) were 0.54 and 0.23 ng m^-3, respectively, with the corresponding value for NPAH (∑NPAHs) being 0.03 ng m^-3 (only detected in 40% of samples). A clear seasonal trend was observed, with higher levels in the cold season and lower in the warm season for ∑PAHs. The same effect was observed for ∑OPAHs, which exhibited a median concentration of 0.72 ng m^-3 in the cold season and 0.10 ng m^-3 in the warm season, and for ∑NPAH, which exhibited a median of 0.04 ng m^-3 in the cold season but were not detected in the warm season. Molecular diagnostic ratios and PCA (principal component analysis) showed a predominantly traffic origin for PACs. The sources of PAHs also depend on meteorological conditions and/or atmospheric reactions, as confirmed by means of statistical analysis. The ∑OPAH/∑PAH and ∑NPAH/∑PAH ratios were higher in the cold season than the warm season, thus suggesting that PAH derivatives originated from primary combustion emission sources together with their parent PAHs. The concentration range found for benzo(a)pyrene was 0.006-0.542 ng m^-3, which is below the threshold value of 1 ng m^-3 established in European legislation as the annual average value. The lifetime lung risk from inhalation of PM₁₀-bound PACs was estimated to be six cancer cases per million people using the World Health Organization method.

A Review on Atmospheric Analysis Focusing on Public Health, Environmental Legislation and Chemical Characterization

Atmospheric pollution has been considered one of the most important topics in environmental science once it can be related to the incidence of respiratory diseases, climate change, and others. Knowing the composition of this complex and variable mixture of gases and particulate matter is crucial to understand the damages it causes, help establish limit levels, reduce emissions, and mitigate risks. In this work, the current scenario of the legislation and guideline values for indoor and outdoor atmospheric parameters will be reviewed, focusing on the inorganic and organic compositions of particulate matter and on biomonitoring. Considering the concentration level of the contaminants in air and the physical aspects (meteorological conditions) involved in the dispersion of these contaminants, different approaches for air sampling and analysis have been developed in recent years. Finally, this review presents the importance of data analysis, whose main objective is to transform analytical results into reliable information about the significance of anthropic activities in air pollution and its possible sources. This information is a useful tool to help the government implement actions against atmospheric air pollution.

Quantitation of ultra-trace nitrated polycyclic aromatic hydrocarbons isomers in water by online solid-phase extraction coupled-liquid chromatography-mass spectrometry

An online solid-phase extraction (SPE)-coupled liquid chromatography-mass spectrometry (LC-MS) method was established for the determination of 10 nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) in water. Water samples were mixed with methanol to generate 40% methanol solutions (v/v), and filtered by 0.45 μm membrane. The filtration with polytetrafluoroethylene(PTFE) membrane got higher recovery rates than nylon membrane, especially for 4-ring and 5-ring nitro-PAHs. 2.5 mL solution was directly injected into online SPE flow path to allow for online purification and enrichment of target analytes in the SPE column. The nitro-PAHs eluted from the SPE column were automatically transferred to the analytical flow path by a well-designed valve-switching system. With the optimization of LC and MS condition, ten nitro-PAH isomers was separated and detected from each other by LC-MS/MS with negative atmospheric pressure chemical ionization (APCI). It was firstly found that nitro-PAHs could produce strong [M-H]^- precursor ions in the primary MS besides [M+e]^- and [M+15]^-. In the secondary MS, the precursor ions mainly lose NO neutral molecule (30 Daltons) to produce daughter ions. The online SPE and LC-MS analysis process was completed in 15.5 min. The linear correlation coefficients of 10 nitro-PAH standard curves were higher than 0.99. The detection limits of nitro-PAHs were about 1.2~22.2 ng/L (S/N=3). The intra-day and inter-day reproducibility (RSD, n=6) were 1.6%~8.4% and 5.3%~16.9%, respectively. The recoveries of 10, 40 and 200 ng/L in tap water were 71.7%~106.4%, 79.7%~100.9% and 73.0%~105.5%, with the corresponding RSD of 2.4%~10.5%, 2.1%~8.6% and 2.7%~6.2%, respectively.

Identification and quantification of phenanthrene ortho-quinones in human urine and their association with lipid peroxidation

Although human exposure to polycyclic aromatic hydrocarbons (PAH) has been associated with in vivo oxidative damage, and hydroxyPAH metabolites have been used as biomarkers to assess PAH-induced oxidative stress, few studies have looked at the likely causative compounds for oxidative stress in humans - PAH quinones. We developed a method using pre-column derivatization - liquid chromatography-heated electrospray ionization-tandem mass spectrometry (LC-HESI-MS/MS) to analyze ortho-phenanthrene quinones (PheQs) in human urine. 1,2-PheQ and 3,4-PheQ were identified and quantified in 3 mL of human urine; their total concentrations were higher in cigarette smokers (0.79 ± 0.98 nmol/6h urine) than in nonsmokers (0.20 ± 0.98 nmol/6h urine) (p < 0.01). The total of 1,2-PheQ and 3,4-PheQ were more strongly correlated with urinary (Z)-7-[1R,2R,3R,5S)-3,5-dihydroxy-2-[(E,3S)-3-hydroxyoct-1-enyl]cyclopentyl]hept-5-enoic acid (8-iso-PGF_2α), a biomarker of lipid peroxidation (R² = 0.53, p < 0.001), than the other phenanthrene metabolites including phenanthrene tetraol (PheT), phenanthrene-1,2-dihydrodiol (1,2-PheD), and total phenanthrene phenols (OHPhe), consistent with the concept that PheQs and likely other PAH quinones play a causal role in the generation of reactive oxygen species (ROS) in humans. Thus, PheQs may be suitable as biomarkers to assess human exposure to oxygenated PAH and the subsequent oxidative damage. This study provides unique support, by analysis of human urinary metabolites, for the PAH quinone mediated oxidative damage hypothesis of PAH carcinogenesis.

Solid-Phase Extraction Combined with Ultra-High-Performance Liquid Chromatography-Tandem Mass Spectrometry for the Determination of 5 Trace Nitro-Polycyclic Aromatic Hydrocarbons in Barbecued Foods

BACKGROUND

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are the derivatives of polycyclic aromatic hydrocarbon which are direct mutagens and carcinogens to human. Nitro-PAHs can be produced in the process of food barbecuing/grilling. At present, there are few studies for the determination of nitro-PAHs in food.

OBJECTIVE

To assess the effect of barbecued food to human health, we have established a method for the determination of 5 nitro-PAHs in barbecued foods.

METHODS

The target nitro-PAHs were extracted with the mixture of methanol/acetone and then purified with an HLB SPE cartridge and finally analyzed by ultra-high-performance liquid chromatography-tandem mass spectrometry. Two pairs of target multiple reaction monitoring (MRM) ion pairs have been successfully identified for the target nitro-PAHs, and confirmed by high-resolution mass spectrometry to explore their formation mechanism.

RESULTS

The method had linear ranges of 2.0-500 µg/L (except 1-nitronaphthalene 20-5000 µg/L) with the correlation coefficients greater than 0.995. The extraction recoveries were between 70.1% and 85.6% with the relative standard deviations less than 10.0%. The limits of detection of the method were less than 0.60 µg/L (except 1-nitronaphthalene 6.0 µg/L).

CONCLUSIONS

The method has been successfully applied to the analysis of 5 nitro-PAHs in barbecued foods. 1-nitronaphthalene, 1,8-dinitropyrene , 1-nitropyrene were detected in some charcoal grilled samples with the contents of 1.35-12.9 µg/kg. 1,8-Dinitropyrene was detected in some oil-fried samples with the contents of 2.12-5.12 µg/kg.

HIGHLIGHTS

This work presents an ultra-high-performance liquid chromatography-tandem mass spectrometry method for the determination of 5 nitro-PAHs in barbecued foods for the first time. The method has been successfully applied to the analysis of 5 nitro-PAHs in various barbecued foods and the nitro-PAHs were detected in some barbecued food samples. The mechanism of mass spectrometric decomposition of nitro-PAHs was investigated as well.

Pressurized liquid extraction followed by liquid chromatography coupled to a fluorescence detector and atmospheric pressure chemical ionization mass spectrometry for the determination of benzo(a)pyrene metabolites in liver tissue of an animal model of colon cancer

Since metabolism is implicated in the carcinogenesis of toxicants, an efficient extraction method together with an analytical method is warranted to quantify tissue burdens of a carcinogen and/or its metabolites. Therefore, the aim of this study was to validate a pressurized liquid extraction (PLE) method for measuring metabolites of benzo(a)pyrene [B(a)P; a food-borne carcinogen] from tissue samples. The sample extraction was performed separately by PLE and liquid-liquid extraction (LLE). PLE followed by high-performance liquid chromatography coupled to online fluorescence detector (HPLC-FLD) was used to quantify separated analytes; and by ultra-high-performance liquid chromatography (UHPLC) coupled to atmospheric pressure chemical ionization tandem mass spectrometry (UHPLC-APCI-MS/MS) were used for confirmation purposes. The UHPLC-MS/MS was set-up in the atmospheric pressure chemical ionization (APCI) positive interface with selective reaction monitoring (SRM). The analytical performance characteristics of the PLE technique was assessed at different temperatures, pressure, number of cycles and solvent types. A methanol + chloroform + water mixture (30:15:10, v/v/v) yielded greater recoveries at an extraction temperature range of 60-80°C, pressure of 10 MPa and an extraction time of 10 min. The PLE method was validated by the analysis of spiked tissue samples and measuring recoveries and limits of quantitation for the analytes of interest using HPLC-FLD equipment. The optimized PLE-HPLC-FLD method was used to quantify the concentrations of B(a)P metabolites in liver samples obtained from a colon cancer animal model. Overall, PLE performed better in terms of extraction efficiency, recovery of B(a)P metabolites and shortened sample preparation time when compared with the classic LLE method.

Polycyclic aromatic compounds in urban air and associated inhalation cancer risks: A case study targeting distinct source sectors

Passive air sampling was conducted in Toronto and the Greater Toronto Area from 2016 to 2017 for 6 periods, in order to investigate ambient levels of polycyclic aromatic compounds (PACs) associated with different source types. The selected sampling sites (n = 8) cover geographical areas with varying source emissions including background, traffic, urban, industrial and residential sites. Passive air samples were analyzed for PACs which include PAHs, alkylated PAHs (alk-PAHs), dibenzothiophene and alkylated dibenzothiophenes (DBTs) and results for PAHs were used to calculate inhalation cancer risks using different approaches. The samples were also characterized for PAH derivatives including nitrated PAHs (NPAHs) and oxygenated PAHs (OPAHs). Concentrations of Σalk-PAHs and DBTs, which are known to be enriched in fossil fuels, as well as ΣNPAHs, were highest at a traffic site (MECP) located adjacent to the 18-lane Highway 401 that runs across Toronto. Except for an industrial site (HH/BU), PAC compositions were similar across the sampling sites with Σalk-PAHs being the most abundant class of PACs suggesting traffic emission was a major contributor to PACs in the atmosphere of Toronto. The industrial site exhibited a distinct chemical composition with ΣPAHs dominating over Σalk-PAHs and with elevated levels of fluoranthene, 9-nitroanthracene, and 9,10-anthraquinone, which likely reflects emissions from nearby industrial sources. MECP and HH/BU exhibited higher lifetime excess inhalation cancer risks indicating an association with traffic and industrial sources. The importance of the traffic sector as a source of PACs to ambient air is further supported by strong correlations of the ΣPAHs, Σalk-PAHs, DBTs, and ΣOPAHs with NO_x. This study highlights the importance of traffic as an emission source of PACs to urban air and the relevance of PAC classes other than just unsubstituted PAHs that are important but currently not included in air quality guidelines or for assessing inhalation cancer risks.

Magnetic halloysite nanotube/polyaniline/copper composite coupled with gas chromatography-mass spectrometry: A rapid approach for determination of nitro-phenanthrenes in water and soil samples

A fast, sensitive and reliable ultrasound-assisted magnetic dispersive solid-phase microextraction (UAMDSPME) setup was developed and evaluated for the enrichment of nitro- phenanthrenes compound in environmental samples prior to GC-MS determination. A new type of nanocomposite sorbent was made based on halloysite nanotubes (HNTs). HNTs is a type of natural material, have attracted great interest because of their large surface area and high chemical and thermal stability. The hybrid nanocomposite (magnetic HNT@PANI@Cu) was obtained by coating the magnetic HNTs by polyaniline (PANI) and afterwards decorating with metalic copper. Its morphology and surface properties were characterized using Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy dispersive spectroscopy and vibrating sample magnetometry. In this work several factors that may affect the extraction efficiencies such as desorption solvent type and its volume, sonication times for extraction and desorption, sorbent amount, organic modifier content, salt concentration and matrix effect were investigated in detail. Under the optimal conditions, the limit of detection (S/N = 3) was 0.25 ng L^-1 and the linearity was in the range of 0.01-100 μg L^-1. The method precision expressed as relative standard deviations (RSDs%) were 4.6-6.1% (intra-day), and 7.2-9.6% (inter-day). Finally, the presented method was successfully applied to the rapid determination of trace levels of nitro-phenanthrenes in spiked water and soil samples.

Chemical toxicology of reactive species in the atmosphere: two decades of progress in an electron acceptor and an electrophile

Air pollutants such as diesel exhaust particles (DEP) are thought to cause pulmonary diseases such as asthma as a result of oxidative stress. While DEP contain a large number of polycyclic aromatic hydrocarbons, we have focused on 9,10-phenanthrenequinone (9,10-PQ) and 1,2-naphthoquinone (1,2-NQ) because of their chemical properties based on their oxidative and chemical modification capabilities. We have found that 9,10-PQ interacts with electron donors such as NADPH (in the presence of enzymes) and dithiols, resulting in generation of excess reactive oxygen species (ROS) through redox cycling. We have also shown that 1,2-NQ is able to modify protein thiols, leading to protein adducts associated with activation of redox signal transduction pathways at lower concentrations and toxicity at higher concentrations. In this review, we briefly introduce our findings from the last two decades.

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) in the environment - A review

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are derivatives of PAHs with at least one nitro-functional group (-NO₂) on the aromatic ring. The toxic effects of several nitro-PAHs are more pronounced than those of PAHs. Some nitro-PAHs are classified as possible or probable human carcinogens by the International Agency for Research on Cancer. Nitro-PAHs are released into the environment from combustion of carbonaceous materials (e.g. fossil fuels, biomass, waste) and post-emission transformation of PAHs. Most studies on nitro-PAHs are about air (gas-phase and particulate matter), therefore less is known about the occurrence, concentrations, transport and fate of nitro-PAHs in soils, aquatic environment and biota. Studies on partition and exchange of nitro-PAHs between adjacent environmental compartments are also sparse. The concentrations of nitro-PAHs cannot easily be predicted from the intensity of anthropogenic activity or easily related to those of PAHs. This is because anthropogenic source strengths of nitro-PAHs are different from those of PAHs, and also nitro-PAHs have additional sources (formed by photochemical conversion of PAHs). The fate and transport of nitro-PAHs could be considerably different from their related PAHs because of their higher molecular weights and considerably different sorption mechanisms. Hence, specific knowledge on nitro-PAHs is required. Regulations on nitro-PAHs are also lacking. We present an extensive review of published literature on the sources, formation, physico-chemical properties, methods of determination, occurrence, concentration, transport, fate, (eco)toxicological and adverse health effects of nitro-PAHs. We also make suggestions and recommendations about data needs, and future research directions on nitro-PAHs. It is expected that this review will stimulate scientific discussion and provide the basis for further research and regulations on nitro-PAHs.

Suspect screening of OH-PAHs and non-target screening of other organic compounds in wood smoke particles using HR-Orbitrap-MS

Wood combustion has been shown to contribute significantly to emissions of polycyclic aromatic hydrocarbons and hydroxylated polycyclic aromatic hydrocarbons, compounds with toxic and carcinogenic properties. However, only a small number of hydroxylated polycyclic aromatic hydrocarbons have been determined in particles from wood combustion, usually compounds with available reference standards. In this present study, suspect and non-target screening strategies were applied to characterize the wood smoke particles from four different wood types and two combustion conditions with respect to hydroxylated polycyclic aromatic hydrocarbons and other organic compounds. In the suspect screening, 32 peaks corresponding to 12 monohydroxylated masses were tentatively identified by elemental composition assignments and matching of isotopic pattern and fragments. More than one structure was suggested for most of the measured masses. Statistical analysis was performed on the non-target screening data in order to single out significant peaks having intensities that depend on the wood type and/or combustion condition. Significant peaks were found in both negative and positive ionization modes, with unique peaks for each wood type and combustion condition, as well as a combination of both factors. Furthermore, structural elucidation of some peaks was done by comparing the spectra in the samples with spectra found in the spectral databases. Six compounds were tentatively identified in positive ionization mode, and 19 in negative ionization mode. The results in this present study demonstrate that there are significant overall differences in the chemistry of wood smoke particles that depends on both the wood type and the combustion condition used.

One-year study of polycyclic aromatic compounds at an urban site in Grenoble (France): Seasonal variations, gas/particle partitioning and cancer risk estimation

21 PAHs, 27 oxy-PAHs and 32 nitro-PAHs were measured every third day over a year in both gaseous (G) and particulate PM10 (P) phases in ambient air of Grenoble (France). Mean total concentrations (G+P) of PAHs and oxy-PAHs were in the same range and about 10ngm(-3). Nitro-PAHs were 50 to 100 times less concentrated averaging 100pgm(-3). Polycyclic aromatic compound (PAC) concentrations were 5 to 7 times higher in "cold" period (October to March) than in "warm" period (April to September). Seasonal variations may be explained by higher primary emissions from residential heating, especially biomass burning in "cold" season. Meteorological conditions and influence of the geomorphology around Grenoble, with the formation of thermal inversion layers leading to the stagnation of pollutants, were additional key parameters. Maximum individual PAC concentrations were observed during two PM10 pollution events in December and February-March. Chemical processes and secondary formation of oxy- and nitro-PAH were probably enhanced by the accumulation of the pollutants during these events. PAC gas/particle partitioning depended on compound molecular weight and vapour pressure. Gas/particle partitioning of oxy- and nitro-PAHs were evaluated using a multi-phase poly-parameter linear free energy relationship model. The PAC cancer risk was assessed using toxic equivalency factors available in the literature (19 PAHs, 10 nitro-PAHs and 1 oxy-PAH). Overall, particle-bound PACs contributed about 76% of the cancer risk. While PAHs accounted for most of the total PAC cancer risk, oxy- and nitro-PAHs could account for up to 24%. The risk quantification across substance classes is limited by toxicological data availability.

Polycyclic aromatic hydrocarbons (PAHs) and their derivatives (alkyl-PAHs, oxygenated-PAHs, nitrated-PAHs and azaarenes) in urban road dusts from Xi'an, Central China

Urban road dusts are carriers of polycyclic aromatic compounds (PACs) and are therefore considered to be a major source of contamination of other environmental compartments and a source of exposure to PACs for urban populations. We determined the occurrence, composition pattern and sources of several PACs (29 alkyl- and parent-PAHs, 15 oxygenated-PAHs (OPAHs), 4 azaarenes (AZAs), and 11 nitrated-PAHs (NPAHs)) in twenty urban road dusts and six suburban surface soils (0-5cm) from Xi'an, central China. The average concentrations of ∑29PAHs, ∑4AZAs, ∑15OPAHs, and ∑11NPAHs were 15767, 673, 4754, and 885 n gg(-1) in road dusts and 2067, 784, 854, and 118 ng g(-1) in surface soils, respectively. The concentrations of most individual PACs were higher in street dusts than suburban soils, particularly for PACs with molecular weight>192 g mol(-1). The enrichment factors of individual PACs were significantly positively correlated with log KOA and log KOW, indicating an increasing deposition and co-sorption of the PACs in urban dusts with decreasing volatility and increasing hydrophobicity. Significant correlations between the concentrations of individual and sum of PACs, carbon fractions (soot and char), and source-characteristic PACs (combustion-derived PAHs and retene, etc.), indicated that PAHs, OPAHs and AZAs were mostly directly emitted from combustion activities and had similar post-emission fates, but NPAHs were possibly more intensely photolyzed after deposition as well as being emitted from vehicle exhaust sources. The incremental lifetime cancer risk (ILCR) resulting from exposure to urban dust bound-PACs was higher than 10(-6), indicating a non-negligible cancer risk to residents of Xi'an.

Fast analysis of 29 polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs with ultra-high performance liquid chromatography-atmospheric pressure photoionization-tandem mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs are ubiquitous in the environment. Some of them are probable carcinogens and some are source markers. This work presents an ultra-high performance liquid chromatography-atmospheric pressure photoionization-tandem mass spectrometry (UHPLC-APPI-MS/MS) method for simultaneous analysis of 20 PAHs and nine nitro-PAHs. These compounds are separated in 15 minutes in the positive mode and 11 minutes in the negative mode, one half of GC/MS analysis time. Two pairs of precursor/product ions are offered, which is essential for confirmation. This method separates and quantifies benzo[a]pyrene (the most toxic PAHs) and non-priority benzo[e]pyrene (isomers, little toxicity) to avoid overestimation of toxin levels, demonstrating its importance for health-related researches. With 0.5% 2,4-difluoroanisole in chlorobenzene as the dopant, limits of detection of PAHs except acenaphthylene and those of nitro-PAHs except 2-nitrofluoranthene are below 10 pg and 3 pg, respectively, mostly lower than or comparable to those reported using LC-related systems. The responses were linear over two orders of magnitude with fairly good accuracy and precision. Certified reference materials and real aerosol samples were analyzed to demonstrate its applicability. This fast, sensitive, and reliable method is the first UHPLC-APPI-MS/MS method capable of simultaneously analyzing 29 environmentally and toxicologically important PAHs and nitro-PAHs.

Determination of oxygenated and native polycyclic aromatic hydrocarbons in urban dust and diesel particulate matter standard reference materials using pressurized liquid extraction and LC-GC/MS

The objective of this study was to develop a novel analytical chemistry method, comprised of a coupled high-performance liquid chromatography-gas chromatography/mass spectrometry system (LC-GC/MS) with low detection limits and high selectivity, for the identification and determination of oxygenated polycyclic aromatic hydrocarbons (OPAHs) and polycyclic aromatic hydrocarbons (PAHs) in urban air and diesel particulate matter. The linear range of the four OPAHs, which include 9,10-anthraquinone, 4H-cyclopenta[def]phenanthrene-4-one, benzanthrone, and 7,12-benz[a]anthraquinone, was 0.7 pg-43.3 ng with limits of detection (LODs) and limits of quantification (LOQs) on the order of 0.2-0.8 and 0.7-1.3 pg, respectively. The LODs in this study are generally lower than values reported in the literature, which can be explained by using large-volume injection. The recoveries of the OPAHs spiked onto glass fiber filters using two different pressurized liquid extraction (PLE) methods were in the ranges of 84-107 and 67-110 %, respectively. The analytical protocols were validated using the following National Institute of Standards and Technology standard reference materials: SRM 1649a (Urban Dust), SRM 1650b (Diesel Particulate Matter), and SRM 2975 (Diesel Particulate Matter, Industrial Forklift). The measured mass fractions of the OPAHs in the standard reference materials (SRMs) in this present study are higher than the values from the literature, except for benzanthrone in SRM 1649a (Urban Dust). In addition to the OPAHs, 44 PAHs could be detected and quantified from the same particulate extract used in this protocol. Using data from the literature and applying a two-sided t test at the 5 % level using Bonferroni correction, significant differences were found between the tested PLE methods for individual PAHs. However, the measured mass fractions of the PAHs were comparable, similar to, or higher than those previously reported in the literature.

Factors and Trends Affecting the Identification of a Reliable Biomarker for Diesel Exhaust Exposure

The monitoring of human exposures to diesel exhaust continues to be a vexing problem for specialists seeking information on the potential health effects of this ubiquitous combustion product. Exposure biomarkers have yielded a potential solution to this problem by providing a direct measure of an individual's contact with key components in the exhaust stream. Spurred by the advent of new, highly sensitive, analytical methods capable of detecting substances at very low levels, there have been numerous attempts at identifying a stable and specific biomarker. Despite these new techniques, there is currently no foolproof method for unambiguously separating diesel exhaust exposures from those arising from other combustion sources. Diesel exhaust is a highly complex mixture of solid, liquid, and gaseous components whose exact composition can be affected by many variables, including engine technology, fuel composition, operating conditions, and photochemical aging. These factors together with those related to exposure methodology, epidemiological necessity, and regulatory reform can have a decided impact on the success or failure of future research aimed at identifying a suitable biomarker of exposure. The objective of this review is to examine existing information on exposure biomarkers for diesel exhaust and to identify those factors and trends that have had an impact on the successful identification of metrics for both occupational and community settings. The information will provide interested parties with a template for more thoroughly understanding those factors affecting diesel exhaust emissions and for identifying those substances and research approaches holding the greatest promise for future success.

An analytical investigation of 24 oxygenated-PAHs (OPAHs) using liquid and gas chromatography-mass spectrometry

We developed two independent approaches for separation and quantitation of 24 oxygenated polycyclic aromatic hydrocarbons (OPAHs) using both liquid chromatography-atmospheric pressure chemical ionization/mass spectrometry (LC-APCI/MS) and gas chromatography-electron impact/mass spectrometry (GC-EI/MS). Building on previous OPAH research, we examined laboratory stability of OPAHs, improved existing method parameters, and compared quantification strategies using standard addition and an internal standard on an environmental sample. Of 24 OPAHs targeted in this research, 19 compounds are shared between methods, with 3 uniquely quantitated by GC-EI/MS and 2 by LC-APCI/MS. Using calibration standards, all GC-EI/MS OPAHs were within 15 % of the true value and had less than 15 % relative standard deviations (RSDs) for interday variability. Similarly, all LC-APCI/MS OPAHs were within 20 % of the true value and had less than 15 % RSDs for interday variability. Instrument limits of detection ranged from 0.18 to 36 ng mL⁻¹ on the GC-EI/MS and 2.6 to 26 ng mL⁻¹ on the LC-APCI/MS. Four standard reference materials were analyzed with each method, and we report some compounds not previously published in these materials, such as perinaphthenone and xanthone. Finally, an environmental passive sampling extract from Portland Harbor Superfund, OR was analyzed by each method using both internal standard and standard addition to compensate for potential matrix effects. Internal standard quantitation resulted in increased precision with similar accuracy to standard addition for most OPAHs using 2-fluoro-fluorenone-¹³C as an internal standard. Overall, this work improves upon OPAH analytical methods and provides some considerations and strategies for OPAHs as focus continues to expand on this emerging chemical class.

Figure

Determination of selected oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) in diesel and air particulate matter standard reference materials (SRMs)

Oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) have recently received much attention in discussions regarding the negative impacts of particulate matter (PM) on human health and the environment. The National Institute of Standards and Technology provides several environmental matrix standard reference materials (SRMs) with certified and reference values for polycyclic aromatic hydrocarbons (PAHs) and nitrated PAHs. In this study, the concentrations of oxygenated PAHs are determined in three air PM SRMs (1649b, 1648a, and 2786) and three diesel PM SRMs (1650b, 2975, and 1975) using two independent gas chromatography-mass spectrometry methods. Concentrations of oxy-PAHs were at the milligrams per kilogram level with higher overall concentrations in diesel PM (up to 50 mg/kg for 9,10-anthraquinone). One of the highest oxy-PAH concentrations (up to 5 mg/kg) measured in the air particulate SRMs was for 7,12-benz[a]anthracenquinone. These results suggest that oxygenated PAHs should not be neglected in the analysis of PM as their concentrations can be as high as those of some PAHs and are one to two orders of magnitude higher than those for nitro-PAHs.

Liquid chromatography tandem mass spectrometry method for characterization of monoaromatic nitro-compounds in atmospheric particulate matter

Nitrogen-containing organic compounds in the atmosphere have drawn attention owing to their impact on aerosol chemistry and physics and their potential adverse effects on the biosphere. Among them, nitrocatechols and their homologs have recently been associated with biomass burning. In the present study, nitrocatechols, nitrophenols, nitroguaiacols and nitrosalicylic acids (NSAs) were simultaneously quantified for the first time by using a new analytical method based on liquid chromatography/tandem mass spectrometry, which was systematically optimized and validated. Several analyte specific issues regarding the sample preparation and chromatographic analysis were addressed in order to ensure method sensitivity, precision, and accuracy. Sample matrix effects were thoroughly investigated in order to ensure method specificity. The method was found to be sensitive with limits of detection ranging from 0.1 to 1.0 μg L(-1), and with accuracy generally between 90 and 104%. The relative standard deviations for repeatability and intermediate precision were better than 4% and 9%, respectively. The method was applied to the analysis of winter and summer PM(10) samples from the city of Ljubljana, Slovenia. Aerosol concentrations as high as 152 and 134 ng m(-3) were obtained for the major aerosol nitro-aromatics: 4-nitrocatechol (4NC) and methyl-nitrocatechols (MNCs), respectively. Up to 500-times higher concentrations of 4NC and MNCs were found in winter compared to summer aerosols. The correlation analysis for winter samples showed that 4NC, MNCs, and NSAs are strongly inter-correlated (R(2)=0.84-0.96). Significant correlations between these analytes and anhydrosugars support their proposed origin from biomass burning. The studied nitro-aromatics were found to constitute a non-negligible fraction (around 1%) of the organic carbon.

Mass spectrometry of atmospheric aerosols--recent developments and applications. Part I: Off-line mass spectrometry techniques

Many of the significant advances in our understanding of atmospheric particles can be attributed to the application of mass spectrometry. Mass spectrometry provides high sensitivity with a fast response time to probe chemically complex particles. This review focuses on recent developments and applications in the field of mass spectrometry of atmospheric aerosols. In Part I of this two-part review, we concentrate on off-line mass spectrometry techniques, which require sample collection on filters but can provide detailed molecular speciation. In particular, off-line mass spectrometry techniques utilizing tandem mass spectrometry experiments and high resolution mass analyzers provide improved insight into secondary organic aerosol formation and heterogeneous reaction pathways through detailed structural elucidation at the molecular level.