Redox electrodeposition polymers: adaptation of the redox potential of polymer-bound Os complexes for bioanalytical applications

Real-Time Measurement of Cellobiose and Glucose Formation during Enzymatic Biomass Hydrolysis

Enzymatic hydrolysis of lignocellulosic biomass for biofuel production relies on complex multi-enzyme ensembles. Continuous and accurate measurement of the released key products is crucial in optimizing the industrial degradation process and also investigating the activity and interaction between the involved enzymes and the insoluble substrate. Amperometric biosensors have been applied to perform continuous cellobiose measurements during the enzymatic hydrolysis of pure cellulose powders. The oxygen-sensitive mediators used in these biosensors restricted their function under physiological or industrial conditions. Also, the combined measurements of the hydrolysis products cellobiose and glucose require a high selectivity of the biorecognition elements. We employed an [Os(2,2′-bipyridine)₂Cl]Cl-modified polymer and cellobiose dehydrogenase to fabricate a cellobiose biosensor, which can accurately and specifically detect cellobiose even in the presence of oxygen and the other main product glucose. Additionally, a glucose biosensor was fabricated to simultaneously measure glucose produced from cellobiose by β-glucosidases. The cellobiose and glucose biosensors work at applied potentials of +0.25 and +0.45 V versus Ag|AgCl (3 M KCl), respectively, and can selectively detect their substrate. Both biosensors were used in combination to monitor the hydrolysis of pure cellulose of low crystallinity or industrial corncob samples. The obtained results correlate with the high-performance liquid chromatography pulsed amperometric detection analysis and demonstrate that neither oxygen nor the presence of redox-active compounds from the lignin fraction of the corncob interferes with the measurements.

Addressing the Selectivity of Enzyme Biosensors: Solutions and Perspectives

Enzymatic biosensors enjoy commercial success and are the subject of continued research efforts to widen their range of practical application. For these biosensors to reach their full potential, their selectivity challenges need to be addressed by comprehensive, solid approaches. This review discusses the status of enzymatic biosensors in achieving accurate and selective measurements via direct biocatalytic and inhibition-based detection, with a focus on electrochemical enzyme biosensors. Examples of practical solutions for tackling the activity and selectivity problems and preventing interferences from co-existing electroactive compounds in the samples are provided such as the use of permselective membranes, sentinel sensors and coupled multi-enzyme systems. The effect of activators, inhibitors or enzymatic substrates are also addressed by coupled enzymatic reactions and multi-sensor arrays combined with data interpretation via chemometrics. In addition to these more traditional approaches, the review discusses some ingenious recent approaches, detailing also on possible solutions involving the use of nanomaterials to ensuring the biosensors' selectivity. Overall, the examples presented illustrate the various tools available when developing enzyme biosensors for new applications and stress the necessity to more comprehensively investigate their selectivity and validate the biosensors versus standard analytical methods.

Rational design of artificial redox-mediating systems toward upgrading photobioelectrocatalysis

Photobioelectrocatalysis has recently attracted particular research interest owing to the possibility to achieve sunlight-driven biosynthesis, biosensing, power generation, and other niche applications. However, physiological incompatibilities between biohybrid components lead to poor electrical contact at the biotic-biotic and biotic-abiotic interfaces. Establishing an electrochemical communication between these different interfaces, particularly the biocatalyst-electrode interface, is critical for the performance of the photobioelectrocatalytic system. While different artificial redox mediating approaches spanning across interdisciplinary research fields have been developed in order to electrically wire biohybrid components during bioelectrocatalysis, a systematic understanding on physicochemical modulation of artificial redox mediators is further required. Herein, we review and discuss the use of diffusible redox mediators and redox polymer-based approaches in artificial redox-mediating systems, with a focus on photobioelectrocatalysis. The future possibilities of artificial redox mediator system designs are also discussed within the purview of present needs and existing research breadth.

PQQ-GDH - Structure, function and application in bioelectrochemistry

This review summarizes the basic features of the PQQ-GDH enzyme as one of the sugar converting biocatalysts. Focus is on the membrane -bound and the soluble form. Furthermore, the main principles of enzymatic catalysis as well as studies on the physiological importance are reviewed. A short overview is given on developments in protein engineering. The major part, however, deals with the different fields of application in bioelectrochemistry. This includes approaches for enzyme-electrode communication such as direct electron transfer, mediator-based systems, redox polymers or conducting polymers and holoenzyme reconstitution, and covers applied areas such as biosensing, biofuel cells, recycling schemes, enzyme competition, light-directed sensing, switchable detection schemes, logical operations by enzyme electrodes and immune sensing.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Extracellular electron transfer features of Gram-positive bacteria

Electroactive microorganisms possess the unique ability to transfer electrons to or from solid phase electron conductors, e.g., electrodes or minerals, through various physiological mechanisms. The processes are commonly known as extracellular electron transfer and broadly harnessed in microbial electrochemical systems, such as microbial biosensors, microbial electrosynthesis, or microbial fuel cells. Apart from a few model microorganisms, the nature of the microbe-electrode conductive interaction is poorly understood for most of the electroactive species. The interaction determines the efficiency and a potential scaling up of bioelectrochemical systems. Gram-positive bacteria generally have a thick electron non-conductive cell wall and are believed to exhibit weak extracellular electron shuttling activity. This review highlights reported research accomplishments on electroactive Gram-positive bacteria. The use of electron-conducting polymers as mediators is considered as one promising strategy to enhance the electron transfer efficiency up to application scale. In view of the recent progress in understanding the molecular aspects of the extracellular electron transfer mechanisms of Enterococcus faecalis, the electron transfer properties of this bacterium are especially focused on. Fundamental knowledge on the nature of microbial extracellular electron transfer and its possibilities can provide insight in interspecies electron transfer and biogeochemical cycling of elements in nature. Additionally, a comprehensive understanding of cell-electrode interactions may help in overcoming insufficient electron transfer and restricted operational performance of various bioelectrochemical systems and facilitate their practical applications.

Tuned Amperometric Detection of Reduced β-Nicotinamide Adenine Dinucleotide by Allosteric Modulation of the Reductase Component of the p-Hydroxyphenylacetate Hydroxylase Immobilized within a Redox Polymer

We report the fabrication of an amperometric NADH biosensor system that employs an allosterically modulated bacterial reductase in an adapted osmium(III)-complex-modified redox polymer film for analyte quantification. Chains of complexed Os(III) centers along matrix polymer strings make electrical connection between the immobilized redox protein and a graphite electrode disc, transducing enzymatic oxidation of NADH into a biosensor current. Sustainable anodic signaling required (1) a redox polymer with a formal potential that matched the redox switch of the embedded reductase and avoided interfering redox interactions and (2) formation of a cross-linked enzyme/polymer film for stable biocatalyst entrapment. The activity of the chosen reductase is enhanced upon binding of an effector, i.e. p-hydroxy-phenylacetic acid ( p-HPA), allowing the acceleration of the substrate conversion rate on the sensor surface by in situ addition or preincubation with p-HPA. Acceleration of NADH oxidation amplified the response of the biosensor, with a 1.5-fold increase in the sensitivity of analyte detection, compared to operation without the allosteric modulator. Repetitive quantitative testing of solutions of known NADH concentration verified the performance in terms of reliability and analyte recovery. We herewith established the use of allosteric enzyme modulation and redox polymer-based enzyme electrode wiring for substrate biosensing, a concept that may be applicable to other allosteric enzymes.

Connecting Biology to Electronics: Molecular Communication via Redox Modality

Biology and electronics are both expert at for accessing, analyzing, and responding to information. Biology uses ions, small molecules, and macromolecules to receive, analyze, store, and transmit information, whereas electronic devices receive input in the form of electromagnetic radiation, process the information using electrons, and then transmit output as electromagnetic waves. Generating the capabilities to connect biology-electronic modalities offers exciting opportunities to shape the future of biosensors, point-of-care medicine, and wearable/implantable devices. Redox reactions offer unique opportunities for bio-device communication that spans the molecular modalities of biology and electrical modality of devices. Here, an approach to search for redox information through an interactive electrochemical probing that is analogous to sonar is adopted. The capabilities of this approach to access global chemical information as well as information of specific redox-active chemical entities are illustrated using recent examples. An example of the use of synthetic biology to recognize external molecular information, process this information through intracellular signal transduction pathways, and generate output responses that can be detected by electrical modalities is also provided. Finally, exciting results in the use of redox reactions to actuate biology are provided to illustrate that synthetic biology offers the potential to guide biological response through electrical cues.

Review of Electrochemically Triggered Macromolecular Film Buildup Processes and Their Biomedical Applications

Macromolecular coatings play an important role in many technological areas, ranging from the car industry to biosensors. Among the different coating technologies, electrochemically triggered processes are extremely powerful because they allow in particular spatial confinement of the film buildup up to the micrometer scale on microelectrodes. Here, we review the latest advances in the field of electrochemically triggered macromolecular film buildup processes performed in aqueous solutions. All these processes will be discussed and related to their several applications such as corrosion prevention, biosensors, antimicrobial coatings, drug-release, barrier properties and cell encapsulation. Special emphasis will be put on applications in the rapidly growing field of biosensors. Using polymers or proteins, the electrochemical buildup of the films can result from a local change of macromolecules solubility, self-assembly of polyelectrolytes through electrostatic/ionic interactions or covalent cross-linking between different macromolecules. The assembly process can be in one step or performed step-by-step based on an electrical trigger affecting directly the interacting macromolecules or generating ionic species.

Bimolecular Rate Constants for FAD-Dependent Glucose Dehydrogenase from Aspergillus terreus and Organic Electron Acceptors

The flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) from Aspergillus species require suitable redox mediators to transfer electrons from the enzyme to the electrode surface for the application of bioelectrical devices. Although several mediators for FAD-GDH are already in use, they are still far from optimum in view of potential, kinetics, sustainability, and cost-effectiveness. Herein, we investigated the efficiency of various phenothiazines and quinones in the electrochemical oxidation of FAD-GDH from Aspergillus terreus. At pH 7.0, the logarithm of the bimolecular oxidation rate constants appeared to depend on the redox potentials of all the mediators tested. Notably, the rate constant of each molecule for FAD-GDH was approximately 2.5 orders of magnitude higher than that for glucose oxidase from Aspergillus sp. The results suggest that the electron transfer kinetics is mainly determined by the formal potential of the mediator, the driving force of electron transfer, and the electron transfer distance between the redox active site of the mediator and the FAD, affected by the steric or chemical interactions. Higher k₂ values were found for ortho-quinones than for para-quinones in the reactions with FAD-GDH and glucose oxidase, which was likely due to less steric hindrance in the active site in the case of the ortho-quinones.

Fusing Sensor Paradigms to Acquire Chemical Information: An Integrative Role for Smart Biopolymeric Hydrogels

The Information Age transformed our lives but it has had surprisingly little impact on the way chemical information (e.g., from our biological world) is acquired, analyzed and communicated. Sensor systems are poised to change this situation by providing rapid access to chemical information. This access will be enabled by technological advances from various fields: biology enables the synthesis, design and discovery of molecular recognition elements as well as the generation of cell-based signal processors; physics and chemistry are providing nano-components that facilitate the transmission and transduction of signals rich with chemical information; microfabrication is yielding sensors capable of receiving these signals through various modalities; and signal processing analysis enhances the extraction of chemical information. The authors contend that integral to the development of functional sensor systems will be materials that (i) enable the integrative and hierarchical assembly of various sensing components (for chemical recognition and signal transduction) and (ii) facilitate meaningful communication across modalities. It is suggested that stimuli-responsive self-assembling biopolymers can perform such integrative functions, and redox provides modality-spanning communication capabilities. Recent progress toward the development of electrochemical sensors to manage schizophrenia is used to illustrate the opportunities and challenges for enlisting sensors for chemical information processing.

Design of an Os Complex-Modified Hydrogel with Optimized Redox Potential for Biosensors and Biofuel Cells

Multistep synthesis and electrochemical characterization of an Os complex-modified redox hydrogel exhibiting a redox potential ≈+30 mV (vs. Ag/AgCl 3 M KCl) is demonstrated. The careful selection of bipyridine-based ligands bearing N,N-dimethylamino moieties and an amino-linker for the covalent attachment to the polymer backbone ensures the formation of a stable redox polymer with an envisaged redox potential close to 0 V. Most importantly, the formation of an octahedral N6-coordination sphere around the Os central atoms provides improved stability concomitantly with the low formal potential, a low reorganization energy during the Os(3+/2+) redox conversion and a negligible impact on oxygen reduction. By wiring a variety of enzymes such as pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase, flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase and the FAD-dependent dehydrogenase domain of cellobiose dehydrogenase, low-potential glucose biosensors could be obtained with negligible co-oxidation of common interfering compounds such as uric acid or ascorbic acid. In combination with a bilirubin oxidase-based biocathode, enzymatic biofuel cells with open-circuit voltages of up to 0.54 V were obtained.

Poly(benzoxazine)s Modified with Osmium Complexes as a Class of Redox Polymers for Wiring of Enzymes to Electrode Surfaces

Benzoxazine-based redox polymers bearing Os complexes are synthesized and used as an immobilization matrix for glucose oxidase (GOx) as a model system for a reagentless biosensor. The polymers are formed by electrochemically induced anodic polymerization of the corresponding benzoxazine monomers modified with Os complexes. The precursors are synthesized in a Mannich-type reaction between bisphenol A, formaldehyde, and the corresponding Os complexes or ligands, which contain free amino groups. The Os complexes are redox active within the polymer films, and thus, can be used as redox relays for the electron transfer between the electrode surface and the prosthetic group within the enzyme. Entrapment of GOx within the poly(benzoxazine) film is achieved successfully, as shown by the biocatalytic activity of the poly(benzoxazine)/GOx films upon the addition of glucose.

Light Induced H2 Evolution from a Biophotocathode Based on Photosystem 1--Pt Nanoparticles Complexes Integrated in Solvated Redox Polymers Films

We report on a biophotocathode based on photosystem 1 (PS1)-Pt nanoparticle complexes integrated in a redox hydrogel for photoelectrocatalytic H2 evolution at low overpotential. A poly(vinyl)imidazole Os(bispyridine)2Cl polymer serves as conducting matrix to shuttle the electrons from the electrode to the PS1-Pt complexes embedded within the hydrogel. Light induced charge separation at the PS1-Pt complexes results in the generation of photocurrents (4.8 ± 0.4 μA cm(-2)) when the biophotocathodes are exposed to anaerobic buffer solutions. Under these conditions, the protons are the sole possible electron acceptors, suggesting that the photocurrent generation is associated with H2 evolution. Direct evidence for the latter process is provided by monitoring the H2 production with a Pt microelectrode in scanning electrochemical microscopy configuration over the redox hydrogel film containing the PS1-Pt complexes under illumination.

Organometallic polymers for electrode decoration in sensing applications

Macromolecules containing metals combine the processing advantages of polymers with the functionality offered by the metal centers. The developments in the area of electrochemical chemo/biosensors based on organometallic polymers are reviewed.

Photoelectrochemistry of photosystem I bound in nafion

Developing a solid state Photosystem I (PSI) modified electrode is attractive for photoelectrochemical applications because of the quantum yield of PSI, which approaches unity in the visible spectrum. Electrodes are constructed using a Nafion film to encapsulate PSI as well as the hole-scavenging redox mediator Os(bpy)2Cl2. The photoactive electrodes generate photocurrents of 4 μA/cm(2) when illuminated with 1.4 mW/cm(2) of 676 nm band-pass filtered light. Methyl viologen (MV(2+)) is present in the electrolyte to scavenge photoelectrons from PSI in the Nafion film and transport charges to the counter electrode. Because MV(2+) is positively charged in both reduced and oxidized states, it is able to diffuse through the cation permeable channels of Nafion. Photocurrent is produced when the working electrode is set to voltages negative of the Os(3+)/Os(2+) redox potential. Charge transfer through the Nafion film and photohole scavenging at the PSI luminal surface by Os(bpy)2Cl2 depends on the reduction of Os redox centers to Os(2+) via hole scavenging from PSI. The optimal film densities of Nafion (10 μg/cm(2) Nafion) and PSI (100 μg/cm(2) PSI) are determined to provide the highest photocurrents. These optimal film densities force films to be thin to allow the majority of PSI to have productive electrical contact with the backing electrode.

Cellobiose dehydrogenase modified electrodes: advances by materials science and biochemical engineering

The flavocytochrome cellobiose dehydrogenase (CDH) is a versatile biorecognition element capable of detecting carbohydrates as well as quinones and catecholamines. In addition, it can be used as an anode biocatalyst for enzymatic biofuel cells to power miniaturised sensor-transmitter systems. Various electrode materials and designs have been tested in the past decade to utilize and enhance the direct electron transfer (DET) from the enzyme to the electrode. Additionally, mediated electron transfer (MET) approaches via soluble redox mediators and redox polymers have been pursued. Biosensors for cellobiose, lactose and glucose determination are based on CDH from different fungal producers, which show differences with respect to substrate specificity, pH optima, DET efficiency and surface binding affinity. Biosensors for the detection of quinones and catecholamines can use carbohydrates for analyte regeneration and signal amplification. This review discusses different approaches to enhance the sensitivity and selectivity of CDH-based biosensors, which focus on (1) more efficient DET on chemically modified or nanostructured electrodes, (2) the synthesis of custom-made redox polymers for higher MET currents and (3) the engineering of enzymes and reaction pathways. Combination of these strategies will enable the design of sensitive and selective CDH-based biosensors with reduced electrode size for the detection of analytes in continuous on-site and point-of-care applications.

Electrochemical communication between microbial cells and electrodes via osmium redox systems

Electrochemical communication between micro-organisms and electrodes is the integral and fundamental part of BESs (bioelectrochemical systems). The immobilization of bacterial cells on the electrode and ensuring efficient electron transfer to the electrode via a mediator are decisive features of mediated electrochemical biosensors. Notably, mediator-based systems are essential to extract electrons from the non-exoelectrogens, a major group of microbes in Nature. The advantage of using polymeric mediators over diffusible mediators led to the design of osmium redox polymers. Their successful use in enzyme-based biosensors and BFCs (biofuel cells) paved the way for exploring their use in microbial BESs. The present mini-review focuses on osmium-bound redox systems used to date in microbial BESs and their role in shuttling electrons from viable microbial cells to electrodes.

High-throughput synthesis and electrochemical screening of a library of modified electrodes for NADH oxidation

We report the combinatorial preparation and high-throughput screening of a library of modified electrodes designed to catalyze the oxidation of NADH. Sixty glassy carbon electrodes were covalently modified with ruthenium(II) or zinc(II) complexes bearing the redox active 1,10-phenanthroline-5,6-dione (phendione) ligand by electrochemical functionalization using one of four different linkers, followed by attachment of one of five different phendione metal complexes using combinatorial solid-phase synthesis methodology. This gave a library with three replicates of each of 20 different electrode modifications. This library was electrochemically screened in high-throughput (HTP) mode using cyclic voltammetry. The members of the library were evaluated with regard to the surface coverage, midpeak potential, and voltammetric peak separation for the phendione ligand, and their catalytic activity toward NADH oxidation. The surface coverage was found to depend on the length and flexibility of the linker and the geometry of the metal complex. The choices of linker and metal complex were also found to have significant impact on the kinetics of the reaction between the 1,10-phenanthroline-5,6-dione ligand and NADH. The rate constants for the reaction were obtained by analyzing the catalytic currents as a function of NADH concentration and scan rate, and the influence of the surface molecular architecture on the kinetics was evaluated.