Simulation of the oxidative metabolism of diclofenac by electrochemistry/(liquid chromatography/)mass spectrometry

Re-assessment of monoclonal antibodies against diclofenac for their application in the analysis of environmental waters

The non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF) is an important environmental contaminant occurring in surface waters all over the world, because, after excretion, it is not adequately removed from wastewater in sewage treatment plants. To be able to monitor this pollutant, highly efficient analytical methods are needed, including immunoassays. In a medical research project, monoclonal antibodies against diclofenac and its metabolites had been produced. Based on this monoclonal anti-DCF antibody, a new indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed and applied for environmental samples. The introduction of a spacer between diclofenac and the carrier protein in the coating conjugate led to higher sensitivity. With a test midpoint of 3 μg L-1 and a measurement range of 1-30 μg L-1, the system is not sensitive enough for direct analysis of surface water. However, this assay is quite robust against matrix influences and can be used for wastewater. Without adjustment of the calibration, organic solvents up to 5%, natural organic matter (NOM) up to 10 mg L-1, humic acids up to 2.5 mg L-1, and salt concentrations up to 6 g L-1 NaCl and 75 mg L-1 CaCl2 are tolerated. The antibody is also stable in a pH range from 3 to 12. Cross-reactivity (CR) of 1% or less was determined for the metabolites 4'-hydroxydiclofenac (4'-OH-DCF), 5-hydroxydiclofenac (5-OH-DCF), DCF lactam, and other NSAIDs. Relevant cross-reactivity occurred only with an amide derivative of DCF, 6-aminohexanoic acid (DCF-Ahx), aceclofenac (ACF) and DCF methyl ester (DCF-Me) with 150%, 61% and 44%, respectively. These substances, however, have not been found in samples. Only DCF-acyl glucuronide with a cross-reactivity of 57% is of some relevance. For the first time, photodegradation products were tested for cross-reactivity. With the ELISA based on this antibody, water samples were analysed. In sewage treatment plant effluents, concentrations in the range of 1.9-5.2 μg L-1 were determined directly, with recoveries compared to HPLC-MS/MS averaging 136%. Concentrations in lakes ranged from 3 to 4.4 ng L-1 and were, after pre-concentration, determined with an average recovery of 100%.

An integrated approach for the assessment of the electrochemical oxidation of diclofenac: By-product identification, microbiological and eco-genotoxicological evaluation

Diclofenac (DCF), a contaminant of emerging concern, is a non-steroidal anti-inflammatory drug widely detected in water bodies, which demonstrated harmful acute and chronic toxicity toward algae, zooplankton and aquatic invertebrates, therefore its removal from impacted water is necessary. DCF is recalcitrant toward traditional treatment technologies, thus, innovative approaches are required. Among them, electrochemical oxidation (EO) has shown promising results. In this research, an innovative multidisciplinary approach is proposed to assess the electrochemical oxidation (EO) of diclofenac from wastewater by integrating the investigations on the removal efficiency and by-product identification with the disinfection capacity and the assessment of the effect on environmental geno-toxicity of by-products generated through the oxidation. The electrochemical treatment successfully degraded DCF by achieving >98 % removal efficiency, operating with NaCl 0.02 M at 50 A m-2. By-product identification analyses showed the formation of five DCF parental compounds generated by decarboxylic and CN cleavage reactions. The disinfection capacity of the EO technique was evaluated by carrying out microbiological tests on pathogens generally found in aquatic environments, including two rod-shaped Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli), one rod-shaped Gram-positive bacterium (Bacillus atrophaeus), and one Gram-positive coccus (Enterococcus hirae). Eco-toxicity was evaluated in freshwater organisms (algae, rotifers and crustaceans) belonging to two trophic levels through acute and chronic tests. Genotoxicity tests were carried out by Comet assay, and relative expression levels of catalase, manganese and copper superoxide dismutase genes in crustaceans. Results highlight the effectiveness of EO for the degradation of diclofenac and the inactivation of pathogens; however, the downstream mixture results in being harmful to the aquatic ecosystem.

Versatile Tools for Understanding Electrosynthetic Mechanisms

Electrosynthesis is a popular, green alternative to traditional organic methods. Understanding the mechanisms is not trivial yet is necessary to optimize reaction processes. To this end, a multitude of analytical tools is available to identify and quantitate reaction products and intermediates. The first portion of this review serves as a guide that underscores electrosynthesis fundamentals, including instrumentation, electrode selection, impacts of electrolyte and solvent, cell configuration, and methods of electrosynthesis. Next, the broad base of analytical techniques that aid in mechanism elucidation are covered in detail. These methods are divided into electrochemical, spectroscopic, chromatographic, microscopic, and computational. Technique selection is dependent on predicted reaction pathways and electrogenerated intermediates. Often, a combination of techniques must be utilized to ensure accuracy of the proposed model. To conclude, future prospects that aim to enhance the field are discussed.

Microfluidic Electrochemistry Meets Trapped Ion Mobility Spectrometry and High-Resolution Mass Spectrometry-In Situ Generation, Separation, and Detection of Isomeric Conjugates of Paracetamol and Ethoxyquin

Over the last 3 decades, electrochemistry (EC) has been successfully applied in phase I and phase II metabolism simulation studies. The electrochemically generated phase I metabolite-like oxidation products can react with selected reagents to form phase II conjugates. During conjugate formation, the generation of isomeric compounds is possible. Such isomeric conjugates are often separated by high-performance liquid chromatography (HPLC). Here, we demonstrate a powerful approach that combines EC with ion mobility spectrometry to separate possible isomeric conjugates. In detail, we present the hyphenation of a microfluidic electrochemical chip with an integrated mixer coupled online to trapped ion mobility spectrometry (TIMS) and time-of-flight high-resolution mass spectrometry (ToF-HRMS), briefly chipEC-TIMS-ToF-HRMS. This novel method achieves results in several minutes, which is much faster than traditional separation approaches like HPLC, and was applied to the drug paracetamol and the controversial feed preservative ethoxyquin. The analytes were oxidized in situ in the electrochemical microfluidic chip under formation of reactive intermediates and mixed with different thiol-containing reagents to form conjugates. These were analyzed by TIMS-ToF-HRMS to identify possible isomers. It was observed that the oxidation products of both paracetamol and ethoxyquin form two isomeric conjugates, which are characterized by different ion mobilities, with each reagent. Therefore, using this hyphenated technique, it is possible to not only form reactive oxidation products and their conjugates in situ but also separate and detect these isomeric conjugates within only a few minutes.

Electrochemical simulation of metabolic reduction and conjugation reactions of unsymmetrical bisacridine antitumor agents, C-2028 and C-2053

Electrochemistry (EC) coupled with analysis techniques such as liquid chromatography (LC) and mass spectrometry (MS) has been developed as a powerful tool for drug metabolism simulation. The application of EC in metabolic studies is particularly favourable due to the low matrix contribution compared to in vitro or in vivo biological models. In this paper, the EC(/LC)/MS system was applied to simulate phase I metabolism of the representative two unsymmetrical bisacridines (UAs), named C-2028 and C-2053, which contain nitroaromatic group susceptible to reductive transformations. UAs are a novel potent class of antitumor agents of extraordinary structures that may be useful in the treatment of difficult for therapy human solid tumors such as breast, colon, prostate, and pancreatic tumors. It is considered that the biological action of these compounds may be due to the redox properties of the nitroaromatic group. At first, the relevant conditions for the electrochemical conversion and product identification process, including the electrode potential range, electrolyte composition, and working electrode material, were optimized with the application of 1-nitroacridine as a model compound. Electrochemical simulation of C-2028 and C-2053 reductive metabolism resulted in the generation of six and five products, respectively. The formation of hydroxylamine m/z [M+H-14]⁺, amine m/z [M+H-30]⁺, and novel N-oxide m/z [M+H-18]⁺ species from UAs was demonstrated. Furthermore, both studied compounds were shown to be stable, retaining their dimeric forms, during electrochemical experiments. The electrochemical method also indicated the susceptibility of C-2028 to phase II metabolic reactions. The respective glutathione and dithiothreitol adducts of C-2028 were identified as ions at m/z 873 and m/z 720. In conclusion, the electrochemical reductive transformations of antitumor UAs allowed for the synthesis of new reactive intermediate forms permitting the study of their interactions with biologically crucial molecules.

Investigation of the Electrooxidation of Thymine on Screen-Printed Carbon Electrodes by Hyphenation of Electrochemistry and Mass Spectrometry

The electrooxidation of thymine on screen-printed carbon electrodes was investigated utilizing different complementary instrumental approaches. The potential-dependent product profile was obtained by recording real-time mass voltammograms. Electrochemical flow cells with integrated disposable electrodes were directly coupled with mass spectrometry to facilitate a very fast detection of electrogenerated species. Thymine dimers were found at a potential of about 1.1 V in ammonium acetate (pH 7.0) and 1.25 V in ammonium hydrogen carbonate electrolyte (pH 8.0). Electrochemistry-capillary electrophoresis-mass spectrometry measurements revealed that two isobaric isomers of a dimeric oxidation product were formed. Separations at different time intervals between end of oxidation and start of separation showed that these were hydrated over time. An investigation of the pK_a values by changing the separation conditions in electrochemistry-capillary electrophoresis-ultraviolet-visible spectroscopy measurements allowed for further characterization of the primary oxidation products. The results showed that both isomers exhibited two deprotonation steps. The oxidation products were further characterized by high-performance liquid chromatography-tandem mass spectrometry. Based on the obtained data, the main oxidation products of thymine in aqueous solution could most likely be identified as N(1)-C(5') and N(1)-C(6') linked dimer species evolving into the corresponding dimer hydrates over time. The presented methods for online characterization of electrochemically pretreated samples showed that not only mass spectrometric data can be obtained by electrochemistry-mass spectrometry but also further characterizations such as the investigation of product stability and the pH-dependent protonation or deprotonation behavior are possible. This is valid not only for stable oxidation products but also for intermediates, as analysis can be carried out within a short time scale. Thus, a vast amount of valuable experimental data can be acquired, which can help in understanding electrooxidation processes.

Charged Tags for the Identification of Oxidative Drug Metabolites Based on Electrochemistry and Mass Spectrometry

Most of the active pharmaceutical ingredients like Metoprolol are oxidatively metabolized by liver enzymes, such as Cytochrome P450 monooxygenases into oxygenates and therefore hydrophilic products. It is of utmost importance to identify the metabolites and to gain knowledge on their toxic impacts. By using electrochemistry, it is possible to mimic enzymatic transformations and to identify metabolic hot spots. By introducing charged-tags into the intermediate, it is possible to detect and isolate metabolic products. The identification and synthesis of initially oxidized metabolites are important to understand possible toxic activities. The gained knowledge about the metabolism will simplify interpretation and predictions of metabolitic pathways. The oxidized products were analyzed with high performance liquid chromatography-mass spectrometry using electrospray ionization (HPLC-ESI-MS) and nuclear magnetic resonance (NMR) spectroscopy. For proof-of-principle, we present a synthesis of one pyridinated main oxidation product of Metoprolol.

Structure elucidation and quantification of the reduction products of anticancer Pt(iv) prodrugs by electrochemistry/mass spectrometry (EC-MS)

Pt(iv) prodrugs are a class of promising anticancer agents, which are activated by reduction to the active Pt(ii) species. Consequently, the reduction process is a crucial parameter. Herein, a new approach using electrochemistry (EC) coupled to liquid chromatography (LC) and electrospray ionization-mass spectrometry (ESI-MS) or inductively coupled plasma (ICP)-MS was applied. This enabled getting insights into the differences in the reduction and ligand release of platinum(iv) complexes with varying equatorial core structures.

Enhanced laccase-mediated transformation of diclofenac and flufenamic acid in the presence of bisphenol A and testing of an enzymatic membrane reactor

The inadequate removal of pharmaceuticals and other micropollutants in municipal wastewater treatment plants, as evidenced by their detection of these substances in the aquatic environment has led to the need for sustainable remediation strategies. Laccases possess a number of advantages including a broad substrate spectrum. To identify promoting or inhibitory effects of reaction partners in the remediation processes we tested not only single compounds-as has been described in most studies-but also mixtures of pollutants. The reaction of diclofenac (DCF) and flufenamic acid (FA), mediated by Trametes versicolor laccase resulted in the formation of products, which were more hydrophilic than the respective reactant (reactant concentration of 0.1 mM; laccase activity 0.5 U/ml). Analyses (HPLC, LC/MS) showed that the product 1a and 1b for DCF and FA, respectively, to be a para-benzoquinone imine derivative. The formation of 1a was enhanced by the addition of bisphenol A (BPA). After 6 days 97% more product was formed in the mixture of DCF and BPA compared with DCF tested alone. Product 1a was also detected in experiments with micropollutant-supplemented secondary effluent. Within 24 h 67% and 100% of DCF and BPA were transformed, respectively (25 U/ml). Experiments with a membrane reactor (volume 10 l; phosphate buffer, pH 7) were in good agreement with the results of the laboratory scale experiments (50 ml). EC50-values were also determined. The data support the use of laccases for the removal or detoxification of recalcitrant pollutants. Thus, the enzyme laccase may be a component of an additional environmentally friendly process for the treatment stage of wastewater remediation.

Prediction of biotransformation products of the fungicide fluopyram by electrochemistry coupled online to liquid chromatography-mass spectrometry and comparison with in vitro microsomal assays

Biotransformation processes of fluopyram (FLP), a new succinate dehydrogenase inhibitor (SDHI) fungicide, were investigated by electrochemistry (EC) coupled online to liquid chromatography (LC) and electrospray mass spectrometry (ESI-MS). Oxidative phase I metabolite production was achieved using an electrochemical flow-through cell equipped with a boron-doped diamond (BDD) electrode. Structural elucidation and prediction of oxidative metabolism pathways were assured by retention time, isotopic patterns, fragmentation, and accurate mass measurements using EC/LC/MS, LC-MS/MS, and/or high-resolution mass spectrometry (HRMS). The results obtained by EC were compared with conventional in vitro studies by incubating FLP with rat and human liver microsomes (RLM, HLM). Known phase I metabolites of FLP (benzamide, benzoic acid, 7-hydroxyl, 8-hydroxyl, 7,8-dihydroxyl FLP, lactam FLP, pyridyl acetic acid, and Z/E-olefin FLP) were successfully simulated by EC/LC/MS. New metabolites including an imide, hydroxyl lactam, and 7-hydroxyl pyridyl acetic acid oxidative metabolites were predicted for the first time in our study using EC/LC/MS and liver microsomes. We found oxidation by dechlorination to be one of the major metabolism mechanisms of FLP. Thus, our results revealed that EC/LC/MS-based metabolic elucidation was more advantageous on time and cost of analysis and enabled matrix-free detection with valuable information about the mechanisms and intermediates of metabolism processes. Graphical abstract Oxidative metabolism of fluopyram.

Hepatocyte-based flow analytical bioreactor for online xenobiotics metabolism bioprediction

The research for new in vitro screening tools for predictive metabolic profiling of drug candidates is of major interest in the pharmaceutical field. The main motivation is to avoid late rejection in drug development and to deliver safer drugs to the market. Thanks to the superparamagnetic properties of iron oxide nanoparticles, a flow bioreactor has been developed which is able to perform xenobiotic metabolism studies. The selected cell line (HepaRG) maintained its metabolic competencies once iron oxide nanoparticles were internalized. Based on magnetically trapped cells in a homemade immobilization chamber, through which a flow of circulating phase was injected to transport nutrients and/or the studied xenobiotic, off-line and online (when coupled to a high-performance liquid chromatography chain) metabolic assays were developed using diclofenac as a reference compound. The diclofenac demonstrated a similar metabolization profile chromatogram, both with the newly developed setup and with the control situation. Highly versatile, this pioneering and innovative instrumental design paves the way for a new approach in predictive metabolism studies.

Paraquat-Melanin Redox-Cycling: Evidence from Electrochemical Reverse Engineering

Parkinson's disease is a neurodegenerative disorder associated with oxidative stress and the death of melanin-containing neurons of the substantia nigra. Epidemiological evidence links exposure to the pesticide paraquat (PQ) to Parkinson's disease, and this link has been explained by a redox cycling mechanism that induces oxidative stress. Here, we used a novel electrochemistry-based reverse engineering methodology to test the hypothesis that PQ can undergo reductive redox cycling with melanin. In this method, (i) an insoluble natural melanin (from Sepia melanin) and a synthetic model melanin (having a cysteinyldopamine-melanin core and dopamine-melanin shell) were entrapped in a nonconducting hydrogel film adjacent to an electrode, (ii) the film-coated electrode was immersed in solutions containing PQ (putative redox cycling reductant) and a redox cycling oxidant (ferrocene dimethanol), (iii) sequences of input potentials (i.e., voltages) were imposed to the underlying electrode to systematically engage reductive and oxidative redox cycling, and (iv) output response currents were analyzed for signatures of redox cycling. The response characteristics of the PQ-melanin systems to various input potential sequences support the hypothesis that PQ can directly donate electrons to melanin. This observation of PQ-melanin redox interactions demonstrates an association between two components that have been individually linked to oxidative stress and Parkinson's disease. Potentially, melanin's redox activity could be an important component in understanding the etiology of neurological disorders such as Parkinson's disease.

Exploiting plug-and-play electrochemistry for drug discovery

Electrochemistry has emerged as a powerful analytical technique for chemical analysis of living cells, biologically active molecules and metabolites. Electrochemical biosensor, microfluidics and mass spectrometry are the most frequently used methods for electrochemical detection and monitory, which comprise a collection of extremely useful measurement tools for various fields of biology and medicine. Most recently, electrochemistry has been shown to be coupled with nanotechnology and genetic engineering to generate new enabling technologies, providing rapid, selective, and sensitive detection and diagnosis platforms. The primary focus of this review is to highlight the utility of electrochemical strategies and their conjunction with other approaches for drug metabolism and discovery. Current challenges and possible future developments and applications of electrochemistry in drug studies are also discussed.

Identification of selected in vitro generated phase-I metabolites of the steroidal selective androgen receptor modulator MK-0773 for doping control purposes

Research into developing anabolic agents for various therapeutic purposes has been pursued for decades. As the clinical utility of anabolic-androgenic steroids has been found to be limited because of their lack of tissue selectivity and associated off-target effects, alternative drug entities have been designed and are commonly referred to as selective androgen receptor modulators (SARMs). While most of these SARMs are of nonsteroidal structure, the drug candidate MK-0773 comprises a 4-aza-steroidal nucleus. Besides the intended therapeutic use, SARMs have been found to be illicitly distributed and misused as doping agents in sport, necessitating frequently updated doping control analytical assays. As steroidal compounds reportedly undergo considerable metabolic transformations, the phase-I metabolism of MK-0773 was simulated using human liver microsomal (HLM) preparations and electrochemical conversion. Subsequently, major metabolic products were identified and characterized employing liquid chromatography-high-resolution/high- accuracy tandem mass spectrometry with electrospray (ESI) and atmospheric pressure chemical ionization (APCI) as well as nuclear magnetic resonance (NMR) spectroscopy. MK-0773 produced numerous phase-I metabolites under the chosen in vitro incubation reactions, mostly resulting from mono- and bisoxygenation of the steroid. HLM yielded at least 10 monooxygenated species, while electrochemistry-based experiments resulted predominantly in three monohydroxylated metabolites. Elemental composition data and product ion mass spectra were generated for these analytes, ESI/APCI measurements corroborated the formation of at least two N-oxygenated metabolites, and NMR data obtained from electrochemistry-derived products supported structures suggested for three monohydroxylated compounds. Hereby, the hydroxylation of the A-ring located N- bound methyl group was found to be of particular intensity. In the absence of controlled elimination studies, the produced information enables the implementation of new target analytes into routine doping controls and expands the focus of anti-doping efforts concerning this new anabolic agent.

Online Investigation of Aqueous-Phase Electrochemical Reactions by Desorption Electrospray Ionization Mass Spectrometry

Electrochemistry (EC) combined with mass spectrometry (MS) is a powerful tool for elucidation of electrochemical reaction mechanisms. However, direct online analysis of electrochemical reaction in aqueous phase was rarely explored. This paper presents the online investigation of several electrochemical reactions with biological relevance in the aqueous phase, such as nitrosothiol reduction, carbohydrate oxidation, and carbamazepine oxidation using desorption electrospray ionization mass spectrometry (DESI-MS). It was found that electroreduction of nitrosothiols [e.g., nitrosylated insulin B (13-23)] leads to free thiols by loss of NO, as confirmed by online MS analysis for the first time. The characteristic mass shift of 29 Da and the reduced intensity provide a quick way to identify nitrosylated species. Equally importantly, upon collision-induced dissociation (CID), the reduced peptide ion produces more fragment ions than its nitrosylated precursor ion (presumably the backbone fragmentation cannot compete with the facile NO loss for the precursor ion), thus facilitating peptide sequencing. In the case of saccharide oxidation, it was found that glucose undergoes electro-oxidation to produce gluconic acid at alkaline pH, but not at neutral and acidic pHs. Such a pH-dependent electrochemical behavior was also observed for disaccharides such as maltose and cellobiose. Upon electrochemical oxidation, carbamazepine was found to undergo ring contraction and amide bond cleavage, which parallels the oxidative metabolism observed for this drug in leucocytes. The mechanistic information of these redox reactions revealed by EC/DESI-MS would be of value in nitroso-proteome research and carbohydrate/drug metabolic studies.

Characterization of a non-approved selective androgen receptor modulator drug candidate sold via the Internet and identification of in vitro generated phase-I metabolites for human sports drug testing

RATIONALE

Potentially performance-enhancing agents, particularly anabolic agents, are advertised and distributed by Internet-based suppliers to a substantial extent. Among these anabolic agents, a substance referred to as LGD-4033 has been made available, comprising the core structure of a class of selective androgen receptor modulators (SARMs).

METHODS

In order to provide comprehensive analytical data for doping controls, the substance was obtained and characterized by nuclear magnetic resonance spectroscopy (NMR) and liquid chromatography/electrospray ionization high resolution/high accuracy tandem mass spectrometry (LC/ESI-HRMS). Following the identification of 4-(2-(2,2,2-trifluoro-1-hydroxyethyl)pyrrolidin-1-yl)-2-(trifluoromethyl)benzonitrile, the substance was subjected to in vitro metabolism studies employing human liver microsomes and Cunninghamella elegans (C. elegans) preparations as well as electrochemical metabolism simulations.

RESULTS

By means of LC/ESI-HRMS, five main phase-I metabolites were identified as products of liver microsomal preparations including three monohydroxylated and two bishydroxylated species. The two most abundant metabolites (one mono- and one bishydroxylated product) were structurally confirmed by LC/ESI-HRMS and NMR. Comparing the metabolic conversion of 4-(2-(2,2,2-trifluoro-1-hydroxyethyl)pyrrolidin-1-yl)-2-(trifluoromethyl)benzonitrile observed in human liver microsomes with C. elegans and electrochemically derived metabolites, one monohydroxylated product was found to be predominantly formed in all three methodologies.

CONCLUSIONS

The implementation of the intact SARM-like compound and its presumed urinary phase-I metabolites into routine doping controls is suggested to expand and complement existing sports drug testing methods.

Mass spectrometric methods for monitoring redox processes in electrochemical cells

Electrochemistry (EC) is a mature scientific discipline aimed to study the movement of electrons in an oxidation-reduction reaction. EC covers techniques that use a measurement of potential, charge, or current to determine the concentration or the chemical reactivity of analytes. The electrical signal is directly converted into chemical information. For in-depth characterization of complex electrochemical reactions involving the formation of diverse intermediates, products and byproducts, EC is usually combined with other analytical techniques, and particularly the hyphenation of EC with mass spectrometry (MS) has found broad applicability. The analysis of gases and volatile intermediates and products formed at electrode surfaces is enabled by differential electrochemical mass spectrometry (DEMS). In DEMS an electrochemical cell is sampled with a membrane interface for electron ionization (EI)-MS. The chemical space amenable to EC/MS (i.e., bioorganic molecules including proteins, peptides, nucleic acids, and drugs) was significantly increased by employing electrospray ionization (ESI)-MS. In the simplest setup, the EC of the ESI process is used to analytical advantage. A limitation of this approach is, however, its inability to precisely control the electrochemical potential at the emitter electrode. Thus, particularly for studying mechanistic aspects of electrochemical processes, the hyphenation of discrete electrochemical cells with ESI-MS was found to be more appropriate. The analytical power of EC/ESI-MS can further be increased by integrating liquid chromatography (LC) as an additional dimension of separation. Chromatographic separation was found to be particularly useful to reduce the complexity of the sample submitted either to the EC cell or to ESI-MS. Thus, both EC/LC/ESI-MS and LC/EC/ESI-MS are common.

Electrochemical simulation of phase I metabolism for 21 drugs using four different working electrodes in an automated screening setup with MS detection

Background: Electrochemical conversion of xenobiotics has been shown to mimic human phase I metabolism for a few compounds. Materials & methods: Twenty-one compounds were analyzed with a semiautomated electrochemical setup and mass spectrometry detection. Results: The system was able to mimic some metabolic pathways, such as oxygen gain, dealkylation and deiodination, but many of the expected and known metabolites were not produced. Conclusion: Electrochemical conversion is a useful approach for the preparative synthesis of some types of metabolites, but as a screening method for unknown phase I metabolites, the method is, in our opinion, inferior to incubation with human liver microsomes and in vivo experiments with laboratory animals, for example.

Comparative removal of commercial diclofenac sodium by electro-oxidation on platinum anode and combined electro-oxidation and electrocoagulation on stainless steel anode

Aqueous solution of diclofenac sodium (DCFNa) from commercial analgesic pill was electro-oxidized on platinum and stainless steel (SS) anodes. On platinum anode, 66% degradation of the parent drug was achieved at pH 4.5 with a corresponding COD reduction of 49% for a specific charge of 4200 Coulombs/L. Degradation and COD reduction were less at higher pHs of 8.5 and 10.9. A number of intermediates were detected with some of them persisting at the end of the treatment. On SS anode, 84% drug removal and 80% COD decline were achieved for a specific charge of 4200 Coulombs/L at pH 10.9, owing to combined electro-oxidation and electrocoagulation. Contrary to platinum anode, here the drug removal and COD reduction were lesser at lower pHs of 8.5 and 4.5. Electrocoagulation was found to proceed with the organics directly forming complex with iron in the matrix of the SS anode with the iron oxidizing to Fe(III) at pH 10.9 and Fe(II) at pHs 8.5 and 4.5. Intermediates detected in residual liquid were much less in number and abundance.

Liquid chromatography/mass spectrometry to study oxidative degradation of environmentally relevant pharmaceuticals by electrochemistry and ozonation

In this work, the potential of electrochemical oxidation as a tool for the rapid prediction of transformation products in water appearing after ozonation is investigated. These two approaches were compared by choosing the two environmentally relevant model compounds diclofenac and metoprolol and comparison of their transformation products after electrochemical oxidation and treatment with ozone. Within these two approaches, certain similarities were observed in the resulting chromatograms: Six transformation products of the electrochemical oxidation of metoprolol were also detected in the ozone samples. For diclofenac two transformation products matched. Additionally, five of the electrochemically generated oxidation products were reported in literature to occur after water treatment processes. The application of a boron-doped diamond working electrode for electrochemical oxidation allowed the generation of hydroxyl radicals, which was shown by spin trapping experiments with p-chlorobenzoic acid. This allowed the generation of certain transformation products previously not obtained by electrochemical oxidation. Concluding, the hyphenation of electrochemistry with liquid chromatography and mass spectrometry offers a useful tool in transformation studies.

A novel electrochemical method for efficient reduction of disulfide bonds in peptides and proteins prior to MS detection

A novel electrochemical (EC) method for fast and efficient reduction of the disulfide bonds in proteins and peptides is presented. The method does not use any chemical agents and is purely instrumental. To demonstrate the performance of the EC reactor cell online with electrospray mass spectrometry, insulin and somatostatin were used as model compounds. Efficient reduction is achieved in continuous infusion mode using an EC reactor cell with a titanium-based working electrode. Under optimized conditions, the presented method shows almost complete reduction of insulin and somatostatin. The method does not require any special sample preparation, and the EC reactor cell makes it suitable for automation. Online EC reduction followed by collision-induced dissociation fragmentation of somatostatin showed more backbone cleavages and improved sequence coverage. By adjusting the settings, the EC reaction efficiency was gradually changed from partial to full disulfide bonds reduction in α-lactalbumin, and the expected shift in charge state distribution has been demonstrated. The reduction can be controlled by adjusting the square-wave pulse, flow rate or mobile phase composition. We have shown the successful use of an EC reactor cell for fast and efficient reduction of disulfide bonds for online mass spectrometry of proteins and peptides. The possibility of online and gradual disulfide bond reduction adds a unique dimension to characterization of disulfide bonds in mid-and top-down proteomics applications.

Serial coupling of RP and zwitterionic hydrophilic interaction LC-MS: suspects screening of diclofenac transformation products by oxidation with a boron-doped diamond electrode

The presence of pollutants and their transformation products (TPs) in the water system is a big concern because of possible adverse effects on the aquatic environment. Their identification is still a challenge that requires the combination of different chromatographic techniques. In the current research, serial coupling of RPLC and zwitterionic hydrophilic interaction LC with TOF-MS was investigated as a single separation technique for the screening of suspected TPs from electrochemical oxidation of diclofenac using a boron-doped diamond electrode. Diclofenac oxidation was performed in three water matrices in order to study its transformation in different chemical contexts. 47 TPs resulting from similar oxidation methods were selected from the literature. As in most cases standards were not available, an identification procedure based on accurate mass data and chromatographic behavior was proposed. According to this procedure, 11 suspected TPs, previously analyzed by LC, GC, or ion chromatography, were detected in a single injection. The method was proved to be reliable and versatile and it could be efficiently employed as a comprehensive analytical tool for the simultaneous analysis of compounds in a wide polarity range.

Electrochemical methods in conjunction with capillary and microchip electrophoresis

Electromigrative techniques such as capillary and microchip electrophoresis (CE and MCE) are inherently associated with various electrochemical phenomena. The electrolytic processes occurring in the buffer reservoirs have to be considered for a proper design of miniaturized electrophoretic systems and a suitable selection of buffer composition. In addition, the control of the electroosmotic flow plays a crucial role for the optimization of CE/MCE separations. Electroanalytical methods have significant importance in the field of detection in conjunction with CE/MCE. At present, amperometric detection and contactless conductivity detection are the predominating electrochemical detection methods for CE/MCE. This paper reviews the most recent trends in the field of electrochemical detection coupled to CE/MCE. The emphasis is on methodical developments and new applications that have been published over the past five years. A rather new way for the implementation of electrochemical methods into CE systems is the concept of electrochemically assisted injection which involves the electrochemical conversions of analytes during the injection step. This approach is particularly attractive in hyphenation to mass spectrometry (MS) as it widens the range of CE-MS applications. An overview of recent developments of electrochemically assisted injection coupled to CE is presented.