Structurally responsive oligonucleotide-based single-probe lateral-flow test for detection of miRNA-21 mimics

Light-activated CRISPR-Cas12a for amplified imaging of microRNA in cell cycle phases at single-cell levels

An ortho-nitrobenzyl phosphate ester-caged nucleic acid hairpin structure coupled to the CRISPR-Cas12a complex is introduced as a functional reaction module for the light-induced activation of the CRISPR-Cas12a (LAC12a) machinery toward the amplified fluorescence detection of microRNA-21 (miRNA-21). The LAC12a machinery is applied for the selective, in vitro sensing of miRNA-21 and for the intracellular imaging of miRNA-21 in different cell lines. The LAC12a system is used to image miRNA-21 in different cell cycle phases of MCF-7 cells. Moreover, the LAC12a machinery integrated in cells enables the two-photon laser confocal microscopy-assisted, light-stimulated spatiotemporal, selective activation of the CRISPR-Cas12a miRNA-21 imaging machinery at the single-cell level and the evaluation of relative expression levels of miRNA-21 at distinct cell cycle phases. The method is implemented to map the distribution of cell cycle phases in an array of single cells.

A lateral flow assay for miRNA-21 based on CRISPR/Cas13a and MnO2 nanosheets-mediated recognition and signal amplification

The point-of-care testing (POCT) of miRNA has significant application in medical diagnosis, yet presents challenges due to their characteristics of high homology, low abundance, and short length, which hinders the achievement of quick detection with high specificity and sensitivity. In this study, a lateral flow assay based on the CRISPR/Cas13a system and MnO2 nanozyme was developed for highly sensitive detection of microRNA-21 (miR-21). The CRISPR/Cas13a cleavage system exhibits the ability to recognize the specific oligonucleotide sequence, where two-base mismatches significantly impact the cleavage activity of the Cas13a. Upon binding of the target to crRNA, the cleavage activity of Cas13a is activated, resulting in the unlocking of the sequence and initiating strand displacement, thereby enabling signal amplification to produce a new sequence P1. When applying the reaction solution to the lateral flow test strip, P1 mediates the capture of MnO2 nanosheets (MnO2 NSs) on the T zone, which catalyzes the oxidation of the pre-immobilized colorless substrate 3,3',5,5'-tetramethylbenzidine (TMB) on the T zone and generates the blue-green product (ox-TMB). The change in gray value is directly proportional to the concentration of miR-21, allowing for qualitative detection through visual inspection and quantitative measurement using ImageJ software. This method achieves the detection of miR-21 within a rapid 10-min timeframe, and the limit of detection (LOD) is 0.33 pM. With the advantages of high specificity, simplicity, and sensitivity, the lateral flow test strip and the design strategy hold great potential for the early diagnosis of related diseases.

An immunoassay-like recognition mechanism-based lateral flow strategy for rapid microRNA analysis

A rapid lateral flow assay (LFA) is developed for the colorimetric and surface-enhanced Raman scattering (SERS) dual-mode detection of microRNA (miRNA) based on the robust immunoassay-like (immuno-like) recognition mechanism of S9.6 antibody to DNA/miRNA duplexes. Different from the traditional target-mediated sandwich-type hybridization-based LFA methods, the formation of S9.6 antibody/miRNA/DNA complexes is more rapid and stable, achieving 40 times higher sensitivity with only 10 min assaying time. Furthermore, taking benefit of the versatility of the immuno-like recognition mode, the multiplexed detection of miRNAs can be realized with the SERS signal readout, providing a versatile LFA design towards sensitive, specific, and multiplexed miRNA analysis.

Comparison of DNA-Gold Nanoparticle Conjugation Methods: Application in Lateral Flow Nucleic Acid Biosensors

Lateral flow nucleic acid biosensors (LFNABs) have attracted extensive attention due to their rapid turnaround time, low cost, and results that are visible to the naked eye. One of the key steps to develop LFNABs is to prepare DNA-gold nanoparticle (DNA-AuNP) conjugates, which affect the sensitivity of LFNABs significantly. To date, various conjugation methods-including the salt-aging method, microwave-assisted dry heating method, freeze-thaw method, low-pH method, and butanol dehydration method-have been reported to prepare DNA-AuNP conjugates. In this study, we conducted a comparative analysis of the analytical performances of LFNABs prepared with the above five conjugation methods, and we found that the butanol dehydration method gave the lowest detection limit. After systematic optimization, the LFNAB prepared with the butanol dehydration method had a detection limit of 5 pM for single-strand DNA, which is 100 times lower than that of the salt-aging method. The as-prepared LFNAB was applied to detect miRNA-21 in human serum, with satisfactory results. The butanol dehydration method thus offers a rapid conjugation approach to prepare DNA-AuNP conjugates for LFNABs, and it can also be extended to other types of DNA biosensors and biomedical applications.

Functional Xeno Nucleic Acids for Biomedical Application

Functional nucleic acids(FNAs) refer to a type of oligonucleotides with functions over the traditional genetic roles of nucleic acids, which have been widely applied in screening, sensing and imaging fields. However, the potential application of FNAs in biomedical field is still restricted by the unsatisfactory stability, biocompatibility, biodistribution and immunity of natural nucleic acids(DNA/RNA). Xeno nucleic acids(XNAs) are a kind of nucleic acid analogues with chemically modified sugar groups that possess improved biological properties, including improved biological stability, increased binding affinity, reduced immune responses, and enhanced cell penetration or tissue specificity. In the last two decades, scientists have made great progress in the research of functional xeno nucleic acids, which makes it an emerging attractive biomedical application material. In this review, we summarized the design of functional xeno nucleic acids and their applications in the biomedical field.

Biosensors, microfluidics systems and lateral flow assays for circulating microRNA detection: A review

MicroRNAs (miRNAs) are short RNA sequences found in eukaryotic cells and they are involved in several diseases pathogenesis including different types of cancers, metabolic and cardiovascular disorders. Thus, miRNAs circulating in serum, plasma, and other body fluids are employed as biomarkers for diagnostic and prognostic purposes and in assessment of drug response. Thus, various methods have been developed for detection of miRNAs including northern blotting, reverse transcriptase polymerase chain reaction (RT-PCR), next-generation sequencing, microarray, and isothermal amplification that are recognized as traditional methods. Considering the importance of early diagnosis and treatment of miRNAs-related diseases, development of simple, one-step, sensitive methods is of great interest. Nowadays developing technologies including lateral flow assay, biosensors (optical and electrochemical) and microfluidic systems which are simple fast responding, user-friendly, and are enabled with visible detection have gained considerable attention. This review briefly discusses miRNAs detection' methods, with a particular focus on lateral flow assay, biosensors, and microfluidic systems as novel and practical procedures.

Electrophoretic mobility shift as a molecular beacon-based readout for miRNA detection

MicroRNAs are short, non-coding RNA sequences involved in gene expression regulation. Quantification of miRNAs in biological fluids involves time consuming and laborious methods such as Northern blotting or PCR-based techniques. Molecular beacons (MB) are an attractive means for rapid detection of miRNAs, although the need for sophisticated readout methods limits their use in research and clinical settings. Here, we introduce a novel method based on delayed electrophoretic mobility, as a quantitative means for detection of miRNAs-MB hybridization. Upon hybridization with the target miRNAs, MB form a fluorescent duplex with reduced electrophoretic mobility, thus bypassing the need for additional staining. In addition to emission of light, the location of the fluorescent band on the gel acts as an orthogonal validation of the target identity, further confirming the specificity of binding. The limit of detection of this approach is approximately 100 pM, depending on the MB sequence. The method is sensitive enough to detect specific red blood cell miRNAs molecules in total RNA, with single nucleotide specificity. Altogether, we describe a rapid and affordable method that offers sensitive detection of single-stranded small DNA and RNA sequences.

Rapid developments in lateral flow immunoassay for nucleic acid detection

Recently, lateral flow assay (LFA) for nucleic acid detection has drawn increasing attention in the point-of-care testing fields. Due to its rapidity, easy implementation, and low equipment requirement, it is well suited for use in rapid diagnosis, food authentication, and environmental monitoring under source-limited conditions. This review will discuss two main research directions of lateral flow nucleic acid tests. The first one is the incorporation of isothermal amplification methods with LFA, which ensures an ultra-high testing sensitivity under non-laboratory conditions. The two most commonly used methodologies will be discussed, namely Loop-mediated Isothermal Amplification (LAMP) and Recombinase Polymerase Amplification (RPA), and some novel methods with special properties will also be introduced. The second research direction is the development of novel labeling materials. It endeavors to increase the sensitivity and quantifiability of LFA testing, where signals can be read and analyzed by portable devices. These methods are compared in terms of limits of detection, detection times, and quantifiabilities. It is anticipated that future research on lateral flow nucleic acid tests will focus on the integration of the whole testing process into a microfluidic system and the combination with molecular diagnostic tools such as clustered regularly interspaced short palindromic repeats to facilitate a rapid and accurate test.

Recent advances in sensitivity enhancement for lateral flow assay

Conventional lateral flow assay (LFA) is typically performed by observing the color changes in the test lines by naked eyes, which achieves considerable commercial success and has a significant impact on the fields of food safety, environment monitoring, disease diagnosis, and other applications. However, this qualitative detection method is not very suitable for low levels of disease biomarkers' detection. Although many nanomaterials are used as new labels for LFA, additional readers limit their application to some extent. Fortunately, a lot of work has been done for improving the sensitivity of LFA. In this review, currently reported LFA sensitivity enhancement methods with an objective evaluation are summarized, such as sample pretreatment, the change of flow rate, and label evolution, and future development direction and challenges of LFAs are discussed.

Improvement in Detection Limit for Lateral Flow Assay of Biomacromolecules by Test-Zone Pre-enrichment

Lateral flow assay (LFA) is one of the most prevalent commercially available techniques for point-of-care tests due to its simplicity, celerity, low cost and robust operation. However, conventional colorimetric LFAs have inferior limits of detection (LODs) compared to sophisticated laboratory-based assays. Here, we report a simple strategy of test-zone pre-enrichment to improve the LOD of LFA by loading samples before the conjugate pad assembly. The developed method enables visual LODs of miR-210 mimic and human chorionic gonadotropin protein, to be improved by 10–100 fold compared with a conventional LFA setup without introducing any additional instrument and reagent except for phosphate running buffer, while no obvious difference occurred for Aflatoxin B1 (AFB1). It takes about 6–8 min to enrich every 50 μL of sample diluted with phosphate running buffer, therefore we can get visual results within 20 min. We identified a parameter by modeling the entire process, the concentration of probe-analyte conjugate at test zone when signaling unit being loaded, to be important for the improvement of visual limit of detection. In addition, the test-zone pre-enrichment did not impair the selectivity when miR-210 mimic was adopted as target. Integrated with other optimization, amplification and modification of LFAs, the developed test-zone pre-enrichment method can be applied to further improve LOD of LFAs.

Oligonucleotide-templated lateral flow assays for amplification-free sensing of circulating microRNAs

Herein we demonstrate the first example of oligonucleotide-templated reaction (OTR) performed on paper, using lateral flow to capture and concentrate specific nucleic acid biomarkers on a test line. Quantitative analysis, using a low-cost benchtop fluorescence reader showed very high specificity down to the single nucleotide level and proved sensitive enough for amplification-free, on-chip, detection of endogenous concentrations of miR-150-5p, a recently identified predictive blood biomarker for preterm birth.

Avenues Toward microRNA Detection In Vitro: A Review of Technical Advances and Challenges

Over the decades, the biological role of microRNAs (miRNAs) in the post-transcriptional regulation of gene expression has been discovered in many cancer types, thus initiating the tremendous expectation of their application as biomarkers in the diagnosis, prognosis, and treatment of cancer. Hence, the development of efficient miRNA detection methods in vitro is in high demand. Extensive efforts have been made based on the intrinsic properties of miRNAs, such as low expression levels, high sequence homology, and short length, to develop novel in vitro miRNA detection methods with high accuracy, low cost, practicality, and multiplexity at point-of-care settings. In this review, we mainly summarized the newly developed in vitro miRNA detection methods classified by three key elements, including biological recognition elements, additional micro-/nano-materials and signal transduction/readout elements, their current challenges and further applications are also discussed.

Soft and flexible material-based affinity sensors

Recent advances in biosensors and point-of-care (PoC) devices are poised to change and expand the delivery of diagnostics from conventional lateral-flow assays and test strips that dominate the market currently, to newly emerging wearable and implantable devices that can provide continuous monitoring. Soft and flexible materials are playing a key role in propelling these trends towards real-time and remote health monitoring. Affinity biosensors have the capability to provide for diagnosis and monitoring of cancerous, cardiovascular, infectious and genetic diseases by the detection of biomarkers using affinity interactions. This review tracks the evolution of affinity sensors from conventional lateral-flow test strips to wearable/implantable devices enabled by soft and flexible materials. Initially, we highlight conventional affinity sensors exploiting membrane and paper materials which have been so successfully applied in point-of-care tests, such as lateral-flow immunoassay strips and emerging microfluidic paper-based devices. We then turn our attention to the multifarious polymer designs that provide both the base materials for sensor designs, such as PDMS, and more advanced functionalised materials that are capable of both recognition and transduction, such as conducting and molecularly imprinted polymers. The subsequent content discusses wearable soft and flexible material-based affinity sensors, classified as flexible and skin-mountable, textile materials-based and contact lens-based affinity sensors. In the final sections, we explore the possibilities for implantable/injectable soft and flexible material-based affinity sensors, including hydrogels, microencapsulated sensors and optical fibers. This area is truly a work in progress and we trust that this review will help pull together the many technological streams that are contributing to the field.

Generic Neutravidin Biosensor for Simultaneous Multiplex Detection of MicroRNAs via Electrochemically Encoded Responsive Nanolabels

Current electrochemical biosensors for multiple miRNAs require tedious immobilization of various nucleic acid probes. Here, we demonstrate an innovative approach using a generic neutravidin biosensor combined with electrochemically encoded responsive nanolabels for facile and simultaneous multiplexed detection of miRNA-21 and miRNA-141. The selectivity of the biosensor arises from the intrinsic properties of the electrochemically encoded responsive nanolabels, comprising biotinylated molecular beacons (biotin-MB) and metal nanoparticles (metal-NPs). The procedure is a simple one-pot assay, where the targeted miRNA causes the opening of biotin-MB followed by capturing of the biotin-MB-metal-NPs by the neutravidin biosensor and simultaneous detection of the captured metal-NPs by stripping square-wave voltammetry (SSWV). The multiplexed detection of miRNA-21 and miRNA-141 is achieved by differentiation of the electrochemical signature (i.e., the peak current) for the different metal-NP labels. The biosensor delivers simultaneous detection of miRNAs with a linear range of 0.5-1000 pM for miRNA-21 and a limit of detection of 0.3 pM (3σ/sensitivity,  n = 3), and a range of 50-1000 pM for miRNA-141, with a limit of detection of 10 pM. Furthermore, we demonstrate multiplexed detection of miRNA-21 and miRNA-141 in a spiked serum sample.

Rapid and simple detection of Tamiflu-resistant influenza virus: Development of oseltamivir derivative-based lateral flow biosensor for point-of-care (POC) diagnostics

We have developed a novel oseltamivir derivative (oseltamivir hexylthiol; OHT) that exhibits a higher binding affinity for Tamiflu-resistant virus (Tamiflu resistance) than for the wild-type virus (Tamiflu-susceptible virus; WT) as an antibody. First, OHT-modified gold nanoparticles (OHT-GNPs) are used in a simple colorimetric assay as nanoprobes for the Tamiflu-resistant virus. In the presence of Tamiflu-resistant virus, they show a colorimetric change from deep red to purple because of the OHT-GNP aggregation driven by strong interactions between OHT and neuraminidase (NA) on the surface of the Tamiflu-resistance. Moreover, the color gradually turns purple as the concentration of the Tamiflu-resistant virus increases, allowing the determination of the presence of the virus with the naked eye. Furthermore, an OHT-based lateral flow assay (LFA) has been developed as a rapid and easy detection device for Tamiflu resistance. It shows detection specificity for various virus concentrations of Tamiflu-resistant virus even for the mixture of WT and Tamiflu-resistant viruses, where the limit of detection (LOD) is 5 × 10² ~ 10³ PFU per test (=1 × 10⁴ PFU/mL). It has been confirmed that this platform can provide accurate information on whether a virus exhibits Tamiflu resistance, thus supporting the selection of appropriate treatments using point-of-care (POC) diagnostics.

A multiplex protein-free lateral flow assay for detection of microRNAs based on unmodified molecular beacons

Lateral flow assays (LFAs) have promising potentials for point-of-care applications. Recently, many LFAs have been reported that are based on hybridization of oligonucleotide strands. Mostly, biotinylated capture DNAs are immobilized on the surface of a nitrocellulose membrane via streptavidin interactions. During the assay, stable colorful complexes get formed that are visible by naked eyes. Here, we present an inexpensive and unique design of LFA that applies unmodified oligonucleotides at capture lines. The presented LFA do not utilize streptavidin or any other affinity protein. We employ structural switch of molecular beacons (MB) in combination with base stacking hybridization (BSH) phenomenon. The unique design of the reported LFA provided high selectivity for target oligonucleotides. We validated potential applications of the system for detection of DNA mimics of two microRNAs in multiplex assays.

Integrated amplified aptasensor with in-situ precise preparation of copper nanoclusters for ultrasensitive electrochemical detection of microRNA 21

MicroRNA 21 (MIR21) has garnered much attention in recent years as an important disease biomarker. The detection of it in human system shows great significance for the healthy evaluation and major diseases early detection. Herein, a novel approach tactfully manipulates the in-situ precise preparation of copper nanoclusters on overlapping Y-shaped ds-DNA for MIR21 analysis were developed in the proposed integrated aptasensor. In the presence of target MIR21, overlapping Y-shaped ds-DNA was constructed on electrode. Copper nanoclusters were in-situ prepared on this effective template for target detection. Taking advantage of exonuclease T7 triggered targets recycling, hybridization chain reaction (HCR) and copper nanoclusters triple amplification strategy, linear detection of MIR21 was achieved from 10pM to 0.1fM with a detection limit down to 10aM (S/N > 3). This approach provides a good model for integrating both synthesis and detection into one electrochemistry component. It showed promising potential for applications in aptamer related target detection in human serum analysis.