Lactic fermentation of cellobiose by a yeast strain displaying beta-glucosidase on the cell surface

Rapid evolution and mechanism elucidation for efficient cellobiose-utilizing Saccharomyces cerevisiae through Synthetic Chromosome Rearrangement and Modification by LoxPsym-mediated Evolution

Lack of cellobiose utilization capability for many microorganisms results in carbon source waste in lignocellulosic biorefinery. In this study, genes for cellobiose transport and hydrolysis were introduced to Saccharomyces cerevisiae synV, a semi-synthetic yeast with an inducible SCRaMbLE (Synthetic Chromosome Rearrangement and Modification by LoxPsym-mediated Evolution) system incorporated into its chromosome V, endowing cellobiose utilization capability to this strain. Thereafter, two evolved strains with 98.1% and 79.2% improvement, respectively, in cellobiose utilization rate were obtained through induced SCRaMbLE. Further studies suggested that the enhanced cellobiose utilization capability directly correlated with copy number increases of introduced genes and some chromosome structural variations. In particular, it was experimentally demonstrated for the first time that deletion of redox stress related gene MXR1 and ATP conversion related gene ADK2 contributed to enhanced cellobiose conversion. Thereafter, the effectiveness of MXR1 and ADK2 deletions was demonstrated in artificial hydrolysate and rice straw hydrolysate, respectively.

Integral valorization of orange peel waste through optimized ensiling: Lactic acid and bioethanol production

The management of the huge amount of orange peel waste (OPW) is a complex issue although it has a very high potential in terms of biorefining. One of the main problems in the valorisation of OPW is the seasonality of its production with the ensiling method being largely proposed as a possible solution. During the ensiling process, value added chemicals including lactic acid, acetic acid and ethanol are spontaneously produced together with a significant loss of volatile solids (VS) . In this contribution, the stimulation of lactic acid bacteria by either a biological (inoculation with leachate coming from a previous ensiling process) or chemical (MnCl₂ supplementation) methods has been tested with the aim to increase the chemicals production preventing, at the same time, the VS loss. The inoculation with the leachate improves both the VS recovery (+7%) and the concentration of lactic acid (+113%) with respect to the uninoculated one (control). The overall yields of the process are noticeable, up to about 55 g·kg_TS^-1 of lactic acid, 26 g·kg_TS^-1 of acetic acid and 120 g g·kgTS-1 of ethanol have been produced. On the other hand, the chemical stimulation enhances the production of liquid products together with a significant VS loss. The proposed preservation method, due to its simplicity, can be easily implemented at full-scale allowing the production of added-value chemicals and the concurrent storage of the OPW that can be further valorised (e.g. animal feed, pectin or biomethane production).

Metabarcoding analysis and fermentation performance of the dominant fungal microbiota associated with the Algerian traditional date product "Btana"

The study highlights the fungal diversity of the traditional Algerian date's product "Btana" prepared with direct Btana method (DBM) and undirect Btana method (UBM). Btana fungal populations were analyzed through 28S metabarcoding. Data treatment resulted in 122,997 reads representing three Phyla in which 76% reads (46 OTUs) belong to Ascomycota phylum. Zygosaccharomyces rouxii was the most prevailed species accounting for 35.40% of the total population. Similarity percentage analysis revealed a low level of resemblance in species in each of the two Btana types (DBM: 17.26%, UBM: 16.87). According to HPLC analysis, lactate was detected in nine samples within a range of 0.87-23.06 g/100g. Culture plating and subsequent D1/D2 domain of 28s DNA analysis showed the prevalence of Z. rouxii. Fermentation of non-renewed date medium revealed a high ethanol production (21.31 ± 2.89 g/100g) by Lachancea thermotolerans and 5.87 g/100g of lactates by Kluyveromyces delphensis. Enzymatic assay revealed a high esterase (C4) and naphtol-AS-BI-phosphohydrolase activity by L. thermotolerans, K. delphensis, and Pichia subpelliculosa, while a high level of α-fucosidase was recorded for L. thermotolerans and P. subpelliculosa. The current results demonstrated that the traditional date product Btana is a promising source for yeasts useful in production of value-added products like bioethanol and lactic acid using low-income date cultivars.

Cell-surface engineering of yeasts for whole-cell biocatalysts

Due to the unique advantages comparing with traditional free enzymes and chemical catalysis, whole-cell biocatalysts have been widely used to catalyze reactions effectively, simply and environment friendly. Cell-surface display technology provides a novel and effective approach for improved whole-cell biocatalysts expressing heterologous enzymes on the cell surface. They can overcome the substrate transport limitation of the intracellular expression and provide the enzymes with enhanced properties. Among all the host surface-displaying microorganisms, yeast is ideally suitable for constructing whole cell-surface-displaying biocatalyst, because of the large cell size, the generally regarded as safe (GRAS) status, and the perfect post-translational processing of secreted proteins. Yeast cell-surface display system has been a promising and powerful method for development of novel and improved engineered biocatalysts. In this review, the characterization and principles of yeast cell-surface display and the applications of yeast cell-surface display in engineered whole-cell biocatalysts as well as the improvement of the enzyme efficiency are summarized and discussed.

Surface Display—An Alternative to Classic Enzyme Immobilization

Enzyme immobilization to solid matrices often presents a challenge due to protein conformation sensitivity, desired enzyme purity, and requirements for the particular carrier properties and immobilization technique. Surface display of enzymes at the cell walls of microorganisms presents an alternative that has been the focus of many research groups worldwide in different fields, such as biotechnology, energetics, pharmacology, medicine, and food technology. The range of systems by which a heterologous protein can be displayed at the cell surface allows the appropriate one to be found for almost every case. However, the efficiency of display systems is still quite low. The most frequently used yeast for the surface display of proteins is Saccharomyces cerevisiae. However, apart from its many advantages, Saccharomyces cerevisiae has some disadvantages, such as low robustness in industrial applications, hyperglycosylation of some heterologous proteins, and relatively low efficiency of surface display. Thus, in the recent years the display systems for alternative yeast hosts with better performances including Pichia pastoris, Hansenula polymorpha, Blastobotrys adeninivorans, Yarrowia lipolytica, Kluyveromyces marxianus, and others have been developed. Different strategies of surface display aimed to increase the amount of displayed protein, including new anchoring systems and new yeast hosts are reviewed in this paper.

Efficient Display of Aspergillus niger β-Glucosidase on Saccharomyces cerevisiae Cell Wall for Aroma Enhancement in Wine

The aim of this study was to evaluate the potential application of cell-surface-displayed β-glucosidase (BGL) in wine aroma enhancement. Gene cassettes for the surface display of Aspergillus niger BGL were constructed using different promoters ( GPD and SED1) and glycosylphosphatidylinositol (GPI) anchoring regions (Sag1, Sed1, and Cwp2). The differences in surface-display cassettes, the tolerance of the displayed BGL to typical winemaking conditions, and the hydrolysis capacity for the liberation of grape aroma glycosides were analyzed. Results revealed that simultaneous utilization of GPD promoter and Sed1 anchoring domain achieved the highest BGL activity. The displayed BGL exhibited relatively high activity at pH 3.0 and at glucose concentration below 2.5% (w/v), compared to commercial enzyme (AR 2000), but exhibited no significant difference under varying ethanol concentrations. Furthermore, the surface-displayed BGL presented better ability to release free terpenols compared to AR 2000. Therefore, a surface-display system could provide a new viable solution for enhancing wine aroma.

Model-based temperature control for improving lactic acid production from glycerol

To maximize the final lactic acid productivity and concentration, temperature control was optimized using a mathematical modelling approach. A kinetic model, including cell growth, product formation and substrate consumption equations, was proposed to describe the lactic acid production process by Escherichia coli AC-521 with glycerol as the substrate. By constructing four functions, the temperature effect was introduced on the fermentation process, where four parameters (X_max, μ_max, Y_ps and β) were observed to be significantly affected by the temperature. For the convenience of application, the temperature control strategies were simplified by dividing the whole fermentation process into several units. In each unit, the temperature was controlled constantly. Based on the model, the optimal temperature for each unit was determined to maximize the final lactate productivity. This temperature control strategy can be effectively applied in batch and fed-batch cultures, and the verified experimental evaluation showed a good correlation with the model data. Under improved temperature control conditions, a maximal lactic acid concentration of 90.4 g L⁻¹ was obtained after 80 h of fed-batch fermentation, giving a productivity of 1.13 g L⁻¹ h⁻¹, which is 1.2 times more than that in the conventional constant temperature during the cultivation course.

With model-based temperature control, yield of lactic acid obtained was higher than that obtained in the conventional process with a constant temperature.

How to select a probiotic? A review and update of methods and criteria

International competition within the dairy market and increasing public awareness about the importance of functional food consumption are providing new challenges for innovation in the probiotic sector. In this context, countless references are currently dedicated to the selection and characterization of new species and more specific strains of probiotic bacteria. In general, these studies adopt basic selection criteria established by the World Health Organization (WHO), including host-associated stress resistance, epithelium adhesion ability, and antimicrobial activity. These aspects are applied to ensure that the candidate probiotic could withstand the stressful conditions of the human digestive system and exert functional proprieties. However, it cannot be assumed that these novel microbial strains are capable of offering several biological benefits attributed to probiotics. Additionally, safety-associated selection criteria, such as plasmid-associated antibiotic resistance spreading and enterotoxin production, are often neglected. This article reviews the recent developments in the processes, strategies, and methods, such as anticarcinogenic, antidepression, antianxiety, antiobesity, antidiabetic, immunostimulatory, and cholesterol-lowering assessments, to select probiotic strains with the ultimate objective of assisting future probiotic microbe evaluation studies.

Design of nanoscale enzyme complexes based on various scaffolding materials for biomass conversion and immobilization

The utilization of scaffolds for enzyme immobilization involves advanced bionanotechnology applications in biorefinery fields, which can be achieved by optimizing the function of various enzymes. This review presents various current scaffolding techniques based on proteins, microbes and nanomaterials for enzyme immobilization, as well as the impact of these techniques on the biorefinery of lignocellulosic materials. Among them, architectural scaffolds have applied to useful strategies for protein engineering to improve the performance of immobilized enzymes in several industrial and research fields. In complexed enzyme systems that have critical roles in carbon metabolism, scaffolding proteins assemble different proteins in relatively durable configurations and facilitate collaborative protein interactions and functions. Additionally, a microbial strain, combined with designer enzyme complexes, can be applied to the immobilizing scaffold because the in vivo immobilizing technique has several benefits in enzymatic reaction systems related to both synthetic biology and metabolic engineering. Furthermore, with the advent of nanotechnology, nanomaterials possessing ideal physicochemical characteristics, such as mass transfer resistance, specific surface area and efficient enzyme loading, can be applied as novel and interesting scaffolds for enzyme immobilization. Intelligent application of various scaffolds to couple with nanoscale engineering tools and metabolic engineering technology may offer particular benefits in research.

Recent advances in yeast cell-surface display technologies for waste biorefineries

Waste biorefinery aims to maximize the output of value-added products from various artificial/agricultural wastes by using integrated bioprocesses. To make waste biorefinery economically feasible, it is thus necessary to develop a low-cost, environment-friendly technique to perform simultaneous biodegradation and bioconversion of waste materials. Cell-surface display engineering is a novel, cost-effective technique that can auto-immobilize proteins on the cell exterior of microorganisms, and has been applied for use with waste biofinery. Through tethering different enzymes (e.g., cellulase, lipase, and protease) or metal-binding peptides on cell surfaces, various yeast strains can effectively produce biofuels and biochemicals from sugar/protein-rich waste materials, catalyze waste oils into biodiesels, or retrieve heavy metals from wastewater. This review critically summarizes recent applications of yeast cell-surface display on various types of waste biorefineries, highlighting its potential and future challenges with regard to commercializing this technology.

Engineered biosynthesis of biodegradable polymers

Advances in science and technology have resulted in the rapid development of biobased plastics and the major drivers for this expansion are rising environmental concerns of plastic pollution and the depletion of fossil-fuels. This paper presents a broad view on the recent developments of three promising biobased plastics, polylactic acid (PLA), polyhydroxyalkanoate (PHA) and polybutylene succinate (PBS), well known for their biodegradability. The article discusses the natural and recombinant host organisms used for fermentative production of monomers, alternative carbon feedstocks that have been used to lower production cost, different metabolic engineering strategies used to improve product titers, various fermentation technologies employed to increase productivities and finally, the different downstream processes used for recovery and purification of the monomers and polymers.

Microbially-driven strategies for bioremediation of bauxite residue

Globally, 3 Gt of bauxite residue is currently in storage, with an additional 120 Mt generated every year. Bauxite residue is an alkaline, saline, sodic, massive, and fine grained material with little organic carbon or plant nutrients. To date, remediation of bauxite residue has focused on the use of chemical and physical amendments to address high pH, high salinity, and poor drainage and aeration. No studies to date have evaluated the potential for microbial communities to contribute to remediation as part of a combined approach integrating chemical, physical, and biological amendments. This review considers natural alkaline, saline environments that present similar challenges for microbial survival and evaluates candidate microorganisms that are both adapted for survival in these environments and have the capacity to carry out beneficial metabolisms in bauxite residue. Fermentation, sulfur oxidation, and extracellular polymeric substance production emerge as promising pathways for bioremediation whether employed individually or in combination. A combination of bioaugmentation (addition of inocula from other alkaline, saline environments) and biostimulation (addition of nutrients to promote microbial growth and activity) of the native community in bauxite residue is recommended as the approach most likely to be successful in promoting bioremediation of bauxite residue.

Advances in metabolic engineering of yeast Saccharomyces cerevisiae for production of chemicals

Yeast Saccharomyces cerevisiae is an important industrial host for production of enzymes, pharmaceutical and nutraceutical ingredients and recently also commodity chemicals and biofuels. Here, we review the advances in modeling and synthetic biology tools and how these tools can speed up the development of yeast cell factories. We also present an overview of metabolic engineering strategies for developing yeast strains for production of polymer monomers: lactic, succinic, and cis,cis-muconic acids. S. cerevisiae has already firmly established itself as a cell factory in industrial biotechnology and the advances in yeast strain engineering will stimulate development of novel yeast-based processes for chemicals production.

Crystal structures of glycoside hydrolase family 3 β-glucosidase 1 from Aspergillus aculeatus

GH3 (glycoside hydrolase family 3) BGLs (β-glucosidases) from filamentous fungi have been widely and commercially used for the supplementation of cellulases. AaBGL1 (Aspergillus aculeatus BGL1) belongs to the GH3 and shows high activity towards cellooligosaccharides up to high degree of polymerization. In the present study we determined the crystal structure of AaBGL1. In addition to the substrate-free structure, the structures of complexes with glucose and various inhibitors were determined. The structure of AaBGL1 is highly glycosylated with 88 monosaccharides (18 N-glycan chains) in the dimer. The largest N-glycan chain comprises ten monosaccharides and is one of the largest glycans ever observed in protein crystal structures. A prominent insertion region exists in a fibronectin type III domain, and this region extends to cover a wide surface area of the enzyme. The subsite +1 of AaBGL1 is highly hydrophobic. Three aromatic residues are present at subsite +1 and are located in short loop regions that are uniquely present in this enzyme. There is a long cleft extending from subsite +1, which appears to be suitable for binding long cellooligosaccharides. The crystal structures of AaBGL1 from the present study provide an important structural basis for the technical improvement of enzymatic cellulosic biomass conversion.

Direct isopropanol production from cellobiose by engineered Escherichia coli using a synthetic pathway and a cell surface display system

Efficient bio-production from lignocellulosic biomass is required for the purpose of developing an inexpensive, practical bio-refinery process. As one approach to address this problem, we genetically engineered Escherichia coli to produce isopropanol directly from cellobiose via the cellobiose degradation by Beta-Glucosidase (BGL) on the cell surface. First, we investigated the cellobiose consumption of two E. coli strains with the BGL protein from Thermobifida fusca YX (Tfu0937) fused to the anchor protein Blc (Tfu0937/Blc) using different fusion sites. Next, we introduced the synthetic pathway for isopropanol production into those strains and compared their isopropanol production in the presence of glucose. Based on the results of these assays, TA212/pTA411, which was introduced Tfu-Blc fused protein expression system and the synthetic pathway for isopropanol production, was selected for the directly isopropanol production from cellobiose. TA212/pTA411 produced 69.0±11.6mM isopropanol at 21h of fermentation, whereas TA212/pTA147, which did not introduced the BGL/anchor fused protein but was introduced the synthetic pathway for isopropanol production, showed no cellobiose consumption and no isopropanol production during fermentation. To our knowledge, this is the first report of the production of a bio-product from cellobiose using E. coli.

Screening of optimal cellulases from symbiotic protists of termites through expression in the secretory pathway of Saccharomyces cerevisiae

For direct and efficient ethanol production from cellulosic materials, we screened optimal cellulases from symbiotic protists of termites through heterologous expression with Saccharomyces cerevisiae. 11 cellulases, belonging to glycoside hydrolase families 5, 7, and 45 endoglucanases (EGs), were confirmed to produce with S. cerevisiae for the first time. A recombinant yeast expressing SM2042B24 EG I was more efficient at degrading carboxylmethyl cellulose than was Trichoderma reesei EG I, a major EG with high cellulolytic activity.

Lactic acid production from lignocellulose-derived sugars using lactic acid bacteria: overview and limits

Lactic acid is an industrially important product with a large and rapidly expanding market due to its attractive and valuable multi-function properties. The economics of lactic acid production by fermentation is dependent on many factors, of which the cost of the raw materials is very significant. It is very expensive when sugars, e.g., glucose, sucrose, starch, etc., are used as the feedstock for lactic acid production. Therefore, lignocellulosic biomass is a promising feedstock for lactic acid production considering its great availability, sustainability, and low cost compared to refined sugars. Despite these advantages, the commercial use of lignocellulose for lactic acid production is still problematic. This review describes the "conventional" processes for producing lactic acid from lignocellulosic materials with lactic acid bacteria. These processes include: pretreatment of the biomass, enzyme hydrolysis to obtain fermentable sugars, fermentation technologies, and separation and purification of lactic acid. In addition, the difficulties associated with using this biomass for lactic acid production are especially introduced and several key properties that should be targeted for low-cost and advanced fermentation processes are pointed out. We also discuss the metabolism of lignocellulose-derived sugars by lactic acid bacteria.

A new diet for yeast to improve biofuel production

In 2010, our group announced the discovery of two cellodextrin transporter families from the cellulolytic fungus, Neurospora crassa. Furthermore, we demonstrated the utility of these transporters in the production of lignocellulosic biofuels. This discovery was made possible by a decision to systematically study cell wall degradation by N. crassa. The identified transport pathway has opened up a new way of thinking about microbial fermentation of hexoses as well as pentoses derived from plant cell walls. Integrating this pathway with the endogenous metabolism and signaling networks of S. cerevisiae is now a major goal of our group.