Biochemistry of microbial polyvinyl alcohol degradation

Novel Bioplastic Based on PVA Functionalized with Anthocyanins: Synthesis, Biochemical Properties and Food Applications

Over the last ten years, researchers' efforts have aimed to replace the classic linear economy model with the circular economy model, favoring green chemical and industrial processes. From this point of view, biologically active molecules, coming from plants, flowers and biomass, are gaining considerable value. In this study, firstly we focus on the development of a green protocol to obtain the purification of anthocyanins from the flower of Callistemon citrinus, based on simulation and on response surface optimization methodology. After that, we utilize them to manufacture and add new properties to bioplastics belonging to class 3, based on modified polyvinyl alcohol (PVA) with increasing amounts from 0.10 to 1.00%. The new polymers are analyzed to monitor morphological changes, optical properties, mechanical properties and antioxidant and antimicrobial activities. Fourier transform infrared spectroscopy (FTIR) spectra of the new materials show the characteristic bands of the PVA alone and a modification of the band at around 1138 cm-1 and 1083 cm-1, showing an influence of the anthocyanins' addition on the sequence with crystalline and amorphous structures of the starting materials, as also shown by the results of the mechanical tests. These last showed an increase in thickening (from 29.92 μm to approx. 37 μm) and hydrophobicity with the concomitant increase in the added anthocyanins (change in wettability with water from 14° to 31°), decreasing the poor water/moisture resistance of PVA that decreases its strength and limits its application in food packaging, which makes the new materials ideal candidates for biodegradable packaging to extend the shelf-life of food. The functionalization also determines an increase in the opacity, from 2.46 to 3.42 T%/mm, the acquisition of antioxidant activity against 2,2-diphenyl-1-picrylhdrazyl and 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) radicals and, in the ferric reducing power assay, the antimicrobial (bactericidal) activity against different Staphylococcus aureus strains at the maximum tested concentration (1.00% of anthocyanins). On the whole, functionalization with anthocyanins results in the acquisition of new properties, making it suitable for food packaging purposes, as highlighted by a food fresh-keeping test.

Lignin-Based Composite Film and Its Application for Agricultural Mulching

Agricultural mulching is an important input for modern agricultural production and plays an important role in guaranteeing food security worldwide. At present, polyethylene (PE) mulching is still commonly used in agricultural production in most countries around the world, which is non-biodegradable, and years of mulching have caused serious agricultural white pollution. Lignin is one of the three major components of plant cell walls, and it is also the main renewable natural aromatic compounds in nature. Lignin-based composite film materials are green, biodegradable, and show good prospects for development in the field of agricultural mulch. This paper introduces the types, structure, and application status of lignin, summarizes the preparation of lignin-based composite film materials and its latest research progress, focuses on the types, preparation methods, and application examples of lignin-based agricultural mulching, and looks forward to the future development prospects of lignin-based agricultural mulching.

Biodegradable Alkali-Swellable Emulsion Polymers: Industrial and Commercial Thickeners

Sustainability and circularity are key issues facing the global polymer industry. The search for biodegradable and environmentally-friendly polymers that can replace conventional materials is a difficult challenge that has been met with limited success. Alternatives must be cost-effective, scalable, and provide equivalent performance. We report that latexes made by the conventional emulsion polymerization of vinyl acetate and functional vinyl ester monomers are efficient thickeners for consumer products and biodegrade in wastewater. This approach uses readily-available starting materials and polymerization is carried out in water at room temperature, in one pot, and generates negligible waste. Moreover, the knowledge that poly(vinyl ester)s are biodegradable will lead to the design of new green polymer materials.

Research progress of photo-crosslink hydrogels in ophthalmology: A comprehensive review focus on the applications

Hydrogel presents a three-dimensional polymer network with high water content. Over the past decade, hydrogel has developed from static material to intelligent material with controllable response. Various stimuli are involved in the formation of hydrogel network, among which photo-stimulation has attracted wide attention due to the advantages of controllable conditions, which has a good application prospect in the treatment of ophthalmic diseases. This paper reviews the application of photo-crosslink hydrogels in ophthalmology, focusing on the types of photo-crosslink hydrogels and their applications in ophthalmology, including drug delivery, tissue engineering and 3D printing. In addition, the limitations and future prospects of photo-crosslink hydrogels are also provided.

The self-designed reactor to achieve efficient degradation of polyvinyl alcohol under high-pressure and high-temperature conditions

A huge amount of polyvinyl alcohol (PVA) fabric is abandoned from nuclear power plants every year, the traditional treatment process will occupy land resources and pollute the environment; therefore, a lot of research has been carried out on the chemical treatment of PVA fabric. Herein, the performance of degradation of polyvinyl alcohol under high-pressure and high-temperature conditions is investigated. The effects of the initial pH value, reaction temperature, molar ratio of H2O2/Fe2+, and H2O2 dosage on PVA degradation were evaluated. In the tested ranges in this work, the degradation of PVA fabric via high-pressure and high-temperature method was optimum at the initial pH value of 4, reaction temperature of 300℃, molar ratio of H2O2/Fe2+ as 10, and H2O2 dosage of 13 g/L. The PVA removal rate and TOC removal rate were 99.99% and 97.36%, respectively. Meanwhile, the high-pressure and high-temperature methods also had a great effect on the removal of Rhodamine-B and Reactive Red X-3B, the removal rates of Rhodamine-B and Reactive Red X-3B were 99.83% and 99.76%, respectively. The reaction mechanism of high-pressure and high-temperature methods was also discussed in this study.

Effect of Starch and Paperboard Reinforcing Structures on Insulative Fiber Foam Composites

Single-use plastic foams are used extensively as interior packaging to insulate and protect items during shipment but have come under increasing scrutiny due to the volume sent to landfills and their negative impact on the environment. Insulative compression molded cellulose fiber foams could be a viable alternative, but they do not have the mechanical strength of plastic foams. To address this issue, a novel approach was used that combined the insulative properties of cellulose fiber foams, a binder (starch), and three different reinforcing paperboard elements (angular, cylindrical, and grid) to make low-density foam composites with excellent mechanical strength. Compression molded foams and composites had a consistent thickness and a smooth, flat finish. Respirometry tests showed the fiber foams mineralized in the range of 37 to 49% over a 46 d testing period. All of the samples had relatively low density (Dd) and thermal conductivity (TC). The Dd of samples ranged from 33.1 to 64.9 kg/m3, and TC ranged from 0.039 to 0.049 W/mk. The addition of starch to the fiber foam (FF+S) and composites not only increased Dd, drying time (Td), and TC by an average of 18%, 55%, and 5.5%, respectively, but also dramatically increased the mechanical strength. The FF+S foam and paperboard composites had 240% and 350% higher average flexural strength (σfM) and modulus (Ef), respectively, than the FF-S composites. The FF-S grid composite and all the FF+S foam and composite samples had equal or higher σfM than EPS foam. Additionally, FF+S foam and paperboard composites had 187% and 354% higher average compression strength (CS) and modulus (Ec), respectively, than the FF-S foam and composites. All the paperboard composites for both FF+S and FF-S samples had comparable or higher CS, but only the FF+S cylinder and grid samples had greater toughness (Ωc) than EPS foam. Fiber foams and foam composites are compatible with existing paper recycling streams and show promise as a biodegradable, insulative alternative to EPS foam internal packaging.

A biodegradable PVA coating constructed on the surface of the implant for preventing bacterial colonization and biofilm formation

BACKGROUND

Bone implant infections pose a critical challenge in orthopedic surgery, often leading to implant failure. The potential of implant coatings to deter infections by hindering biofilm formation is promising. However, a shortage of cost-effective, efficient, and clinically suitable coatings persists. Polyvinyl alcohol (PVA), a prevalent biomaterial, possesses inherent hydrophilicity, offering potential antibacterial properties.

METHODS

This study investigates the PVA solution's capacity to shield implants from bacterial adhesion, suppress bacterial proliferation, and thwart biofilm development. PVA solutions at concentrations of 5%, 10%, 15%, and 20% were prepared. In vitro assessments evaluated PVA's ability to impede bacterial growth and biofilm formation. The interaction between PVA and mCherry-labeled Escherichia coli (E. coli) was scrutinized, along with PVA's therapeutic effects in a rat osteomyelitis model.

RESULTS

The PVA solution effectively restrained bacterial proliferation and biofilm formation on titanium implants. PVA solution had no substantial impact on the activity or osteogenic potential of MC3T3-E1 cells. Post-operatively, the PVA solution markedly reduced the number of Staphylococcus aureus and E. coli colonies surrounding the implant. Imaging and histological scores exhibited significant improvements 2 weeks post-operation. Additionally, no abnormalities were detected in the internal organs of PVA-treated rats.

CONCLUSIONS

PVA solution emerges as an economical, uncomplicated, and effective coating material for inhibiting bacterial replication and biofilm formation on implant surfaces, even in high-contamination surgical environments.

Tailoring the properties of poly(vinyl alcohol) "twin-chain" gels via sebacic acid decoration

HYPOTHESIS

The development of gels capable to adapt and act at the interface of rough surfaces is a central topic in modern science for Cultural Heritage preservation. To overcome the limitations of solvents or polymer solutions, commonly used in the restoration practice, poly(vinyl alcohol) (PVA) "twin-chain" polymer networks (TC-PNs) have been recently proposed. The properties of this new class of gels, that are the most performing gels available for Cultural Heritage preservation, are mostly unexplored. This paper investigates how chemical modifications affect gels' structure and their rheological behavior, producing new gelled systems with enhanced and tunable properties for challenging applications, not restricted to Cultural Heritage preservation.

EXPERIMENTS

In this study, the PVA-TC-PNs structural and functional properties were changed by functionalization with sebacic acid into a new class of TC-PNs. Functionalization affects the porosity and nanostructure of the network, changing its uptake/release of fluids and favoring the uptake of organic solvents with various polarity, a crucial feature to boost the versatility of TC-PNs in practical applications.

FINDINGS

The functionalized gels exhibited unprecedented performances during the cleaning of contemporary paintings from the Peggy Gugghenheim collection (Venice), whose restoration with traditional solvents and swabs would be difficult to avoid possible disfigurements to the painted layers. These results candidate the functionalized TC-PNs as a new, highly promising class of gels in art preservation.

PVA-Based Films with Strontium Titanate Nanoparticles Dedicated to Wound Dressing Application

Bioactive materials may be applied in tissue regeneration, and an example of such materials are wound dressings, which are used to accelerate skin healing, especially after trauma. Here, we proposed a novel dressing enriched by a bioactive component. The aim of our study was to prepare and characterize poly(vinyl alcohol) films modified with strontium titanate nanoparticles. The physicochemical properties of films were studied, such as surface free energy and surface roughness, as well as the mechanical properties of materials. Moreover, different biological studies were carried out, like in vitro hemo- and cyto-compatibility, biocidal activity, and anti-biofilm formation. Also, the degradation of the materials' utilization possibilities and enzymatic activity in compost were checked. The decrease of surface free energy, increase of roughness, and improvement of mechanical strength were found after the addition of nanoparticles. All developed films were cyto-compatible, and did not induce a hemolytic effect on the human erythrocytes. The PVA films containing the highest concentration of STO (20%) reduced the proliferation of Eschericha coli, Pseudomonas aeruginosa, and Staphylococcus aureus significantly. Also, all films were characterized by surface anti-biofilm activity, as they significantly lowered the bacterial biofilm abundance and its dehydrogenase activity. The films were degraded by the compost microorganism. However, PVA with the addition of 20%STO was more difficult to degrade. Based on our results, for wound dressing application, we suggest using bioactive films based on PVA + 20%STO, as they were characterized by high antibacterial properties, favorable physicochemical characteristics, and good biocompatibility with human cells.

Biodegradable Pea Protein Fibril Hydrogel-Based Quasi-Solid-State Zn-Ion Battery

Zinc-ion batteries show great potential as the next-generation power source due to their nontoxic, low-cost, and safe properties. However, issues with zinc anodes, such as dendrite growth and parasitic hydrogen evolution reactions (HERs), must be addressed to commercialize them. Solutions, such as quasi-solid-state electrolytes made from synthetic polymer hydrogels, have been proposed to improve battery flexibility and energy density. However, most polymers used are nonbiodegradable, posing a challenge to sustainability. In this study, hydrogels made from biodegradable poly(vinyl alcohol) and protein nanofibrils from pea protein, a renewable plant-based source, are used as an electrolyte in aqueous zinc-ion batteries. Results show that the flexible and biodegradable hydrogel can enhance the zinc anode stability and effectively restrict HER. This phenomenon is because of the hydrogen-bond network between nanofibril functional groups and water molecules. In addition, the interaction between functional groups on nanofibrils and Zn2+ constructs ion channels for the even migration of Zn2+, avoiding dendrite growth. The Zn||Zn symmetric cell using the hydrogel electrolyte exhibits a long lifespan of over 3000 h and improved capacity retention in the Zn||AC-I2 hybrid ion batteries by suppressing cathode material dissolution. This study suggests the potential of biodegradable hydrogels as a sustainable and effective solution for biodegradable soft powering sources.

High-Barrier, Biodegradable Films with Polyvinyl Alcohol/Polylactic Acid + Wax Double Coatings: Influence of Relative Humidity on Transport Properties and Suitability for Modified Atmosphere Packaging Applications

Polyvinyl alcohol (PVOH) exhibits outstanding gas-barrier properties, which favor its use as a biodegradable, high-barrier coating on food-packaging films, possibly in combination with modified atmospheres. Nonetheless, its high sensitivity to water can result in a severe loss of barrier properties, significantly limiting its applications with fresh foods and in high-humidity conditions. In this work, the water vapor (PWV) and oxygen permeability (PO2) of high-barrier biodegradable films with PVOH/PLA + wax double coatings were extensively characterized in a wide range of relative humidity (from 30 to 90%), aimed at understanding the extent of the interaction of water with the wax and the polymer matrices and the impact of this on the permeation process. What is more, a mathematical model was applied to the PWV data set in order to assess its potential to predict the permeability of the multilayer films by varying storage/working relative humidity (RH) conditions. The carbon dioxide permeability (PCO2) of the films was further evaluated, and the corresponding permselectivity values were calculated. The study was finally augmented through modified atmosphere packaging (MAP) tests, which were carried out on double-coated films loaded with 0 and 5% wax, and UV-Vis analyses. The results pointed out the efficacy of the PLA + wax coating layer in hampering the permeation of water molecules, thus reducing PVOH swelling, as well as the UV-shielding ability of the multilayer structures. Moreover, the MAP tests underlined the suitability of the double-coated films for being used as a sustainable alternative for the preservation of foods under modified atmospheres.

The s-oph enzyme for efficient degradation of polyvinyl alcohol: soluble expression and catalytic properties

BACKGROUND

Polyvinyl alcohol (PVA) is one of the most widely used water-soluble polymers with remarkable mechanical properties. However, water-soluble polymers are among the major organic pollutants of streams, river, and marine ecosystems. Once dispersed in aqueous systems, they can directly interfere with the life cycle of aquatic organisms via direct toxic effects. There is thus an urgent need for microorganisms or enzymes that can efficiently degrade them. Oxidized PVA hydrolase plays an important role in the pathway of PVA biodegradation. It is the key enzyme in the second step of the pathway for complete degradation of PVA.

METHODS AND RESULTS

The s-oph gene was cloned from the laboratory-isolated strain Sphingopyxis sp. M19. This gene was expressed in the Escherichia coli system pET32a/s-oph expression vector, with the products forming an inclusion body. By binding with a molecular chaperone, pET32a/s-oph/BL21 (DE3)/pGro7 was successfully constructed, which enabled the s-oph gene to be solubly expressed in E. coli. The protein encoded by the s-oph gene was purified at a yield of 16.8 mg L-1, and its catalytic activity reached 852.71 U mg-1. In the s-oph enzyme reaction system, the efficiency of PVA degradation was increased to 233.5% compared with that of controls.

CONCLUSIONS

The s-oph enzyme exhibited the characteristics of being able to degrade PVA with high efficiency, specificity, and stability. This enzyme has good potential for practical application in ameliorating plastic pollution and protecting the environment.

Enhancing the Mechanical Properties of Poly(vinyl alcohol) Fibers by Lithium Iodide Addition

The effect of lithium iodide (LiI) on the mechanical strength, properties, and molecular orientation of poly(vinyl alcohol) (PVA) fibers spun by wet spinning and then heat-stretched was studied. The stretchability of LiI-PVA fibers was improved, and the rupture during stretching was suppressed compared to PVA fibers. In addition, the tensile strength and elastic modulus of the thermally stretched fibers have been significantly improved. It was also found that the addition of LiI improves the molecular orientation of PVA. This was achieved because LiI reduced the hydrogen bonds between the molecular chains of PVA, resulting in reduced crystallinity. Most of the LiI in the fiber could be removed by a coagulation bath and washing during the spinning process. This means that LiI is eventually removed, and the heat-treatment strengthens the hydrogen bonds, resulting in excellent mechanical strength.

Visible-light photocatalytic degradation of water-soluble polyvinyl alcohol in aqueous solution by Cu2O@TiO2: Optimization of conditions, mechanisms and toxicity analysis

Polyvinyl alcohol (PVA), a water-soluble synthetic polymer, is one of the most prevalent non-native polyvinyl alcohols found in the environment. Due to its inherent invisibility, its potential for causing severe environmental pollution is often underestimated. To achieve efficient degradation of PVA in wastewater, a Cu2O@TiO2 composite was synthesized through the modification of titanium dioxide with cuprous oxide, and its photocatalytic degradation of PVA was investigated. The Cu2O@TiO2 composite, supported by titanium dioxide, facilitated photocarrier separation and demonstrated high photocatalytic efficiency. Under alkaline conditions, the composite exhibited a 98% degradation efficiency for PVA solutions and a 58.7% PVA mineralization efficiency. Radical capture experiments and electron paramagnetic resonance (EPR) analyses revealed that superoxide radicals primarily drive the degradation process within the reaction system. Throughout the degradation process, PVA macromolecules are broken down into smaller molecules, including ethanol, and compounds containing aldehyde, ketone, and carboxylic acid functional groups. Although the intermediate products exhibit reduced toxicity compared to PVA, they still pose certain toxic hazards. Consequently, further research is necessary to minimize the environmental impact of these degradation products.

Fabrication, Characterization, and Microbial Biodegradation of Transparent Nanodehydrated Bioplastic (NDB) Membranes Using Novel Casting, Dehydration, and Peeling Techniques

NDBs were fabricated from gum Arabic (GA) and polyvinyl alcohol (PVA) in different ratios using novel techniques (casting, dehydration, and peeling). The GA/PVA blends were cast with a novel vibration-free horizontal flow (VFHF) technique, producing membranes free of air bubble defects with a homogenous texture, smooth surface, and constant thickness. The casting process was achieved on a self-electrostatic template (SET) made of poly-(methyl methacrylate), which made peeling the final product membranes easy due to its non-stick behavior. After settling the casting of the membranous, while blind, the sheets were dried using nanometric dehydration under a mild vacuum stream using a novel stratified nano-dehydrator (SND) loaded with P2O5. After drying the NDB, the dry, smooth membranes were peeled easily without scratching defects. The physicochemical properties of the NDBs were investigated using FTIR, XRD, TGA, DTA, and AFM to ensure that the novel techniques did not distort the product quality. The NDBs retained their virgin characteristics, namely, their chemical functional groups (FTIR results), crystallinity index (XRD data), thermal stability (TGA and DTA), and ultrastructural features (surface roughness and permeability), as well as their microbial biodegradation ability. Adding PVA enhanced the membrane's properties except for mass loss, whereby increasing the GA allocation in the NDB blend reduces its mass loss at elevated temperatures. The produced bioplastic membranes showed suitable mechanical properties for food packaging applications and in the pharmaceutical industry for the controlled release of drugs. In comparison to control samples, the separated bacteria and fungi destroyed the bioplastic membranes. Pseudomonas spp. and Bacillus spp. were the two main strains of isolated bacteria, and Rhizobus spp. was the main fungus. The nano-dehydration method gave the best solution for the prompt drying of water-based biopolymers free of manufacturing defects, with simple and easily acquired machinery required for the casting and peeling tasks, in addition to its wonderful biodegradation behavior when buried in wet soil.

Polyvinyl alcohol coating releasing fungal blastospores improves kill effect of attract-and-kill beads

Polyvinyl alcohol (PVA) is a biodegradable, water-soluble polymer with excellent film forming properties, commonly studied or used as tablet coating, food packaging or controlled release fertilizers. Attract-and-kill (AK) beads are sustainable, microbial alternatives to synthetic soil insecticides, whose onset of lethal effect largely depend on how fast the encapsulated entomopathogenic fungus forms virulent conidia. Therefore, the objective of this study was to develop a water-soluble coating accelerating the kill effect of AK beads by immediately releasing virulent Metarhizium brunneum CB15-III blastospores. We assessed three PVA types (PVA 4-88, 8-88, 10-98) which differed in their degree of hydrolysis or molecular weight for their ability to release viable blastospores from thin films after drying at 60-40 °C, and examined how polyethylene glycol and soy-lecithin impact the blastospore survival. Finally, we evaluated the effectiveness of coated AK beads in a bioassay against Tenebrio molitor larvae. The blastospore release rate quadrupled within the first 5 min with decreasing molecular weight and degree of hydrolysis, with PVA 4-88 releasing 79 ± 19% blastospores. Polyethylene glycol and soy-lecithin significantly increased the blastospore survival to 18-28% for all three PVA types. Coated beads exhibited a uniform, 22.4 ± 7.3 µm thin coating layer, with embedded blastospores, as confirmed by scanning electron microscopy. The blastospore coating increased the mortality rate of T. molitor larvae over uncoated AK beads, decreasing the median lethal time from 10 to 6 days. Consequently, the blastospore coating accelerated the kill effect of regular AK beads. These findings pave the way to enhanced pest control efficacy from coated systems such as beads or seeds.

Functional characterization and taxonomic classification of novel gammaproteobacterial diversity in sponges

Sponges harbour exceptionally diverse microbial communities, whose members are largely uncultured. The class Gammaproteobacteria often dominates the microbial communities of various sponge species, but most of its diversity remains functional and taxonomically uncharacterised. Here we reconstructed and characterised 32 metagenome-assembled genomes (MAGs) derived from three sponge species. These MAGs represent ten novel species and belong to seven orders, of which one is new. We propose nomenclature for all these taxa. These new species comprise sponge-specific bacteria with varying levels of host specificity. Functional gene profiling highlights significant differences in metabolic capabilities across the ten species, though each also often exhibited a large degree of metabolic diversity involving various nitrogen- and sulfur-based compounds. The genomic features of the ten species suggest they have evolved to form symbiotic interaction with their hosts or are well-adapted to survive within the sponge environment. These Gammaproteobacteria are proposed to scavenge substrates from the host environment, including metabolites or cellular components of the sponge. Their diverse metabolic capabilities may allow for efficient cycling of organic matter in the sponge environment, potentially to the benefit of the host and other symbionts.

Living symbiotic bacteria-involved skin dressing to combat indigenous pathogens for microbiome-based biotherapy toward atopic dermatitis

Many skin diseases, such as atopic dermatitis (AD), are featured with the dysbiosis of skin microbiota. The clinically recommended options for AD treatments suffer from poor outcomes and high side-effects, leading to severe quality-of-life impairment. To deal with this long-term challenge, we develop a living bacterial formulation (Hy@Rm) that integrates skin symbiotic bacteria of Roseomonas mucosa with poly(vinyl pyrrolidone), poly(vinyl alcohol) and sodium alginate into a skin dressing by virtue of the Ca²⁺-mediated cross-linking and the freezing-thawing (F-T) cycle method. Hy@Rm dressing creates a favorable condition to not only serve as extrinsic culture harbors but also as nutrient suppliers to support R. mucosa survival in the harsh microenvironment of AD sites to defeat S. aureus, which predominantly colonizes AD skins as an indigenous pathogen, mainly through the secretion of sphingolipids metabolites by R. mucosa like a therapeutics bio-factory. Meanwhile, this elaborately designed skin dressing could accelerate wound healing, normalize aberrant skin characters, recover skin barrier functions, alleviate AD-associated immune/inflammation responses, functioning like a combinational therapy. This study offers a promising means for the topical bacteria transplant to realize effective microbe biotherapy toward the skin diseases feature with microbe milieu disorders, including but not limited to AD disease.

•

Symbiotic bacteria were employed to defeat pathogenic bacteria in the diseased skins to treat atopic dermatitis (AD).

•

A living symbiotic bacteria-involved skin dressing was designed to serve as extrinsic culture harbors and nutrient suppliers to support R. mucosa survival in the harsh microenvironment to defeat S. aureus, which predominantly colonizes AD skins.

•

This study offered a promising means for the topical bacteria transplant to realize effective microbiome-based biotherapy toward the skin diseases feature with microbe milieu disorders.

Biodegradation of macro- and micro-plastics in environment: A review on mechanism, toxicity, and future perspectives

Plastic waste has gained remarkable research attention due to its accumulation, associated environmental issues, and impact on living organisms. In order to overcome this challenge, there is an urgent need for its removal from the environment. Under this menace, finding appropriate treatment methods like biodegradation instead of typical treatment methods is of supreme importance. However, there is a limited review on bio-decomposition of plastics, existing microbial species, their degradation efficacy, and mechanism. From this point of view, this study focused on a brief overview of biodegradation such as influencing factors on biodegradation, existing species for macro- and micro-plastics, and present research gap. Degradation percentage, limitations of existing species, and future recommendations are proposed. Microbial species such as bacteria, algae, and fungi have the ability to decompose plastics but they are unable to completely mineralize the plastics. Meanwhile, there is limited knowledge about the involved enzymes in plastics degradation, especially in the case of algae. Bio-decomposition of plastics requires more stringent conditions which are usually feasible for field application. This work will be a reference for new researchers to use this effective strategy for plastic pollution removal.

Synthesis of Modified Poly(vinyl Alcohol)s and Their Degradation Using an Enzymatic Cascade

Poly(vinyl alcohol) (PVA) is a water-soluble synthetic vinyl polymer with remarkable physical properties including thermostability and viscosity. Its biodegradability, however, is low even though a large amount of PVA is released into the environment. Established physical-chemical degradation methods for PVA have several disadvantages such as high price, low efficiency, and secondary pollution. Biodegradation of PVA by microorganisms is slow and frequently involves pyrroloquinoline quinone (PQQ)-dependent enzymes, making it expensive due to the costly cofactor and hence unattractive for industrial applications. In this study, we present a modified PVA film with improved properties as well as a PQQ-independent novel enzymatic cascade for the degradation of modified and unmodified PVA. The cascade consists of four steps catalyzed by three enzymes with in situ cofactor recycling technology making this cascade suitable for industrial applications.

Unidirectional Nanopore Dehydration Induces an Anisotropic Polyvinyl Alcohol Hydrogel Membrane with Enhanced Mechanical Properties

As a biocompatible, degradable polymer material, polyvinyl alcohol (PVA) can have a wide range of applications in the biomedical field. PVA aqueous solutions at room temperature can be cast into very thin films with poor mechanical strength via water evaporation. Here, we describe a novel dehydration method, unidirectional nanopore dehydration (UND). The UND method was used to directly dehydrate a PVA aqueous solution to form a water-stable, anisotropic, and mechanically robust PVA hydrogel membrane (PVAHM), whose tensile strength, elongation at break, and swelling ratio reached values of up to ~2.95 MPa, ~350%, and ~350%, respectively. The film itself exhibited an oriented arrangement of porous network structures with an average pore size of ~1.0 μm. At 70 °C, the PVAHMs formed were even more mechanically robust, with a tensile strength and elongation at break of 10.5 MPa and 891%, almost 3.5 times and 2 times greater than the PVAHM prepared at 25 °C, respectively. The processing temperature affects the velocity at which the water molecules flow unidirectionally through the nanopores, and could, thus, alter the overall transformation of the PVA chains into a physically crosslinked 3D network. Therefore, the temperature setting during UND can control the mechanical properties of the hydrogel membrane to meet the requirements of various biomaterial applications. These results show that the UND can induce the ordered rearrangement of PVA molecular chains, forming a PVAHM with superior mechanical properties and exhibiting a greater number of stronger hydrogen bonds. Therefore, the novel dehydration mode not only induces the formation of a mechanically robust and anisotropic PVA hydrogel membrane with a porous network structure and an average pore size of ~1.0 μm, but also greatly enhances the mechanical properties by increasing the temperature. It may be applied for the processing of water-soluble polymers, including proteins, as novel functional materials.

Insights into Evolutionary, Genomic, and Biogeographic Characterizations of Chryseobacterium nepalense Represented by a Polyvinyl Alcohol-Degrading Bacterium, AC3

Chryseobacterium spp. are Gram-negative rods found ubiquitously in the environment, with certain species being reported as having unusual degrading properties. Polyvinyl alcohol (PVA) is used widely in industry but causes serious global environmental pollution. Here, we report the complete genome sequence of a novel bacterium, AC3, that efficiently degrades PVA. As the representative genome of Chryseobacterium nepalense, key genomic characteristics (e.g., mobile genetic elements, horizontal genes, genome-scale metabolic network, secondary metabolite biosynthesis gene clusters, and carbohydrate-active enzymes) were comprehensively investigated to reveal the potential genetic features of this species. Core genome phylogenetic analysis in combination with average nucleotide identity, average amino acid identity, and in silico DNA-DNA hybridization values provided an accurate taxonomic position of C. nepalense in the genus Chryseobacterium. Comparative genomic analysis of AC3 with closely related species suggested evolutionary dynamics characterized by a species-specific genetic repertoire, dramatic rearrangements, and evolutionary constraints driven by selective pressure, which facilitated the speciation and adaptative evolution of C. nepalense. Biogeographic characterization indicated that this species is ubiquitously distributed not only in soil habitats but also in a variety of other source niches. Bioinformatic analysis revealed the potential genetic basis of PVA degradation in AC3, which included six putative genes associated with the synthesis of PVA dehydrogenase, cytochrome c, oxidized PVA hydrolase, and secondary alcohol dehydrogenase. Our study reports the first complete genome of C. nepalense with PVA-degrading properties, providing comprehensive insights into the genomic characteristics of this species and increasing our understanding of the microbial degradation of PVA. IMPORTANCE Although PVA is a biodegradable polymer, the widespread use of PVA in global industrialization has resulted in serious environmental problems. To date, knowledge of effective and applicable PVA-degrading bacteria is limited, and thus, the discovery of novel PVA biodegraders is pertinent. Here, we isolated a novel bacterial strain, AC3, which efficiently degraded PVA. The complete genome of AC3 was sequenced as the first genome sequence of the species C. nepalense. Comparative genomic analysis was performed to comprehensively investigate the phylogenetic relationships, genome-scale metabolic network, key genomic characteristics associated with genomic evolution, evolutionary dynamics between AC3 and its close relatives, and biogeographic characterization of C. nepalense, particularly regarding the potential genetic basis of PVA degradation. These findings could advance our understanding of the genomic characteristics of C. nepalense and PVA bioremediation.

Efficient depolymerization of polyethylene terephthalate (PET) and polyethylene furanoate by engineered PET hydrolase Cut190

The enzymatic recycling of polyethylene terephthalate (PET) can be a promising approach to tackle the problem of plastic waste. The thermostability and activity of PET-hydrolyzing enzymes are still insufficient for practical application. Pretreatment of PET waste is needed for bio-recycling. Here, we analyzed the degradation of PET films, packages, and bottles using the newly engineered cutinase Cut190. Using gel permeation chromatography and high-performance liquid chromatography, the degradation of PET films by the Cut190 variant was shown to proceed via a repeating two-step hydrolysis process; initial endo-type scission of a surface polymer chain, followed by exo-type hydrolysis to produce mono/bis(2-hydroxyethyl) terephthalate and terephthalate from the ends of fragmented polymer molecules. Amorphous PET powders were degraded more than twofold higher than amorphous PET film with the same weight. Moreover, homogenization of post-consumer PET products, such as packages and bottles, increased their degradability, indicating the importance of surface area for the enzymatic hydrolysis of PET. In addition, it was required to maintain an alkaline pH to enable continuous enzymatic hydrolysis, by increasing the buffer concentration (HEPES, pH 9.0) depending on the level of the acidic products formed. The cationic surfactant dodecyltrimethylammonium chloride promoted PET degradation via adsorption on the PET surface and binding to the anionic surface of the Cut190 variant. The Cut190 variant also hydrolyzed polyethylene furanoate. Using the best performing Cut190 variant (L136F/Q138A/S226P/R228S/D250C-E296C/Q123H/N202H/K305del/L306del/N307del) and amorphous PET powders, more than 90 mM degradation products were obtained in 3 days and approximately 80 mM in 1 day.

Graphical Abstract

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Fungal bioremediation of agricultural wastewater in a long-term treatment: biomass stabilization by immobilization strategy

Fungal bioremediation emerges as an effective technology for pesticide treatment, but its successful implementation depends on overcoming the problem of microbial contamination. In this regard, fungal immobilization on wood seems to be a promising strategy, but there are two main drawbacks: the predominant removal of pesticides by sorption and fungal detachment. In this study, agricultural wastewater with pesticides was treated by Trametes versicolor immobilized on wood chips in a rotary drum bioreactor (RDB) for 225 days, achieving fungal consolidation and high pesticide biodegradation through two main improvements: the use of a more favorable substrate and the modification of operating conditions. Fungal community dynamic was assessed by denaturing gradient gel electrophoresis (DGGE) analysis and subsequent prominent band sequencing, showing a quite stable community in the RDB, mainly attributed to the presence of T. versicolor. Pesticide removals were up to 54 % diuron and 48 % bentazon throughout the treatment. Afterwards, pesticide-contaminated wood chips were treated by T. versicolor in a solid biopile-like system. Hence, these results demonstrate that the microbial contamination constraint has definitely been overcome, and fungal bioremediation technology is ready to be implemented on a larger scale.

Characterization of a Deep-Sea Actinobacterium Strain Uncovers Its Prominent Capability of Utilizing Taurine and Polyvinyl Alcohol

Actinobacteria represent a large group of important prokaryotes with great application potentials and widely distribute in diverse natural environments including the ocean. However, compared to their terrestrial cultured members, there are much less available marine Actinobacteria, especially deep-sea counterparts. Here, we cultured a bacterial strain of deep-sea actinobacterium, Marmoricola sp. TYQ2, by using a basal medium supplemented with taurine. Consistently, the growth of strain TYQ2 was significantly promoted by the supplement of taurine. Transcriptomic analysis showed that the expressions of genes encoding proteins associated with taurine metabolization and utilization as well as energy generation were evidently up-regulated when taurine was added. Moreover, strain TYQ2 was demonstrated to degrade polyvinyl alcohol (PVA) with the involvement of the redox cycle of extracellular quinol and quinone and the reduction of iron to ferrous, and strain TYQ2 could utilize the degradation products for energy production, thereby supporting bacterial growth. Overall, our experimental results demonstrate the prominent degradation capabilities of Marmoricola sp. TYQ2 toward the organics taurine and PVA.

Can polymer-degrading microorganisms solve the bottleneck of plastics' environmental challenges?

Increasing world population and industrial activities have enhanced anthropogenic pollution, plastic pollution being especially alarming. So, plastics should be recycled and/or make them biodegradable. Chemical and physical remediating methods are usually energy consuming and costly. In addition, they are not ecofriendly and usually produce toxic byproducts. Bioremediation is a proper option as it is cost-efficient and environmentally friendly. Plastic production and consumption are increasing daily, and, as a consequence, more microorganisms are exposed to these nonbiodegradable polymers. Therefore, investigating new efficient microorganisms and increasing the knowledge about their biology can pave the way for efficient and feasible plastic bioremediation processes. In this sense, omics, systems biology and bioinformatics are three important fields to analyze the biodegradation pathways in microorganisms. Based on the above-mentioned technologies, researchers can engineer microorganisms with specific desired properties to make bioremediation more efficient.

Mistletoe viscin: a hygro- and mechano-responsive cellulose-based adhesive for diverse material applications

Mistletoe viscin is a natural cellulosic adhesive consisting of hierarchically organized cellulose microfibrils (CMFs) surrounded by a humidity-responsive matrix that enables mechanical drawing into stiff and sticky fibers. Here, we explored the processability and adhesive capacity of viscin and demonstrated its potential as a source material for various material applications, as well as a source for bioinspired design. Specifically, we revealed that viscin fibers exhibit humidity-activated self-adhesive properties that enable "contact welding" into complex 2D and 3D architectures under ambient conditions. We additionally discovered that viscin can be processed into stiff and transparent free-standing films via biaxial stretching in the hydrated state, followed by drying, whereby CMFs align along local stress fields. Furthermore, we determined that viscin adheres strongly to both synthetic materials (metals, plastics, and glass) and biological tissues, such as skin and cartilage. In particular, skin adhesion makes viscin a compelling candidate as a wound sealant, as we further demonstrate. These findings highlight the enormous potential of this hygro- and mechano-responsive fiber-reinforced adhesive for bioinspired and biomedical applications.

Bioplastics for a circular economy

Bioplastics - typically plastics manufactured from bio-based polymers - stand to contribute to more sustainable commercial plastic life cycles as part of a circular economy, in which virgin polymers are made from renewable or recycled raw materials. Carbon-neutral energy is used for production and products are reused or recycled at their end of life (EOL). In this Review, we assess the advantages and challenges of bioplastics in transitioning towards a circular economy. Compared with fossil-based plastics, bio-based plastics can have a lower carbon footprint and exhibit advantageous materials properties; moreover, they can be compatible with existing recycling streams and some offer biodegradation as an EOL scenario if performed in controlled or predictable environments. However, these benefits can have trade-offs, including negative agricultural impacts, competition with food production, unclear EOL management and higher costs. Emerging chemical and biological methods can enable the 'upcycling' of increasing volumes of heterogeneous plastic and bioplastic waste into higher-quality materials. To guide converters and consumers in their purchasing choices, existing (bio)plastic identification standards and life cycle assessment guidelines need revision and homogenization. Furthermore, clear regulation and financial incentives remain essential to scale from niche polymers to large-scale bioplastic market applications with truly sustainable impact.

Bacteria with a mouth: Discovery and new insights into cell surface structure and macromolecule transport

A bacterium with a "mouth"-like pit structure isolated for the first time in the history of microbiology was a Gram-negative rod, containing glycosphingolipids in the cell envelope, and named Sphingomonas sp. strain A1. The pit was dynamic, with repetitive opening and closing during growth on alginate, and directly included alginate concentrated around the pit, particularly by flagellins, an alginate-binding protein localized on the cell surface. Alginate incorporated into the periplasm was subsequently transferred to the cytoplasm by cooperative interactions of periplasmic solute-binding proteins and an ATP-binding cassette transporter in the cytoplasmic membrane. The mechanisms of assembly, functions, and interactions between the above-mentioned molecules were clarified using structural biology. The pit was transplanted into other strains of sphingomonads, and the pitted recombinant cells were effectively applied to the production of bioethanol, bioremediation for dioxin removal, and other tasks. Studies of the function of the pit shed light on the biological significance of cell surface structures and macromolecule transport in bacteria.

Insights into enzymatic degradation of physically crosslinked hydrogels anchored by functionalized carbon nanofillers

Immobilization of hydrophobic enzymes on the surface of nanofillers disturbs the non-covalent interactions of polymer–filler networks and destabilizes physically crosslinked hydrogels.

Molecular diffusion in ternary poly(vinyl alcohol) solutions

The diffusion kinetics of a molecular probe—rhodamine B—in ternary aqueous solutions containing poly(vinyl alcohol), glycerol, and surfactants was investigated using fluorescence correlation spectroscopy and dynamic light scattering. We show that the diffusion characteristics of rhodamine B in such complex systems is determined by a synergistic effect of molecular crowding and intermolecular interactions between chemical species. The presence of glycerol has no noticeable impact on rhodamine B diffusion at low concentration, but significantly slows down the diffusion of rhodamine B above 3.9% (w/v) due to a dominating steric inhibition effect. Furthermore, introducing surfactants (cationic/nonionic/anionic) to the system results in a decreased diffusion coefficient of the molecular probe. In solutions containing nonionic surfactant, this can be explained by an increased crowding effect. For ternary poly(vinyl alcohol) solutions containing cationic or anionic surfactant, surfactant—polymer and surfactant—rhodamine B interactions alongside the crowding effect of the molecules slow down the overall diffusivity of rhodamine B. The results advance our insight of molecular migration in a broad range of industrial complex formulations that incorporate multiple compounds, and highlight the importance of selecting the appropriate additives and surfactants in formulated products.

Aged layered double hydroxide nanosheet-polyvinyl alcohol dispersions for enhanced gas barrier coating performance

Whilst applying a coating layer to a polymer film is a routine approach to enhance the gas barrier properties of the film, it is counter-intuitive to consider that the gas barrier performance of the film would improve by ageing the coating dispersion for weeks before application. Herein, we report that the oxygen barrier performance of a 12 μm PET film coated with a dispersion of inorganic nanosheets in polyvinyl alcohol can be significantly enhanced by ageing this coating dispersion for up to 8 weeks before application. We found up to a 37-fold decrease in the oxygen transmission rate (OTR) of the PET coated film using aged dispersions of [Mg_0.66Al_0.33(OH)₂](NO₃)_0.33 layered double hydroxide nanosheets (Mg₂Al-LDH NS) in polyvinyl alcohol (PVA) compared to the film coated with an equivalent freshly prepared LDH/PVA dispersion. A limiting OTR value of 0.31 cc m^-2 day^-1 was achieved using the PET film coated with a 3 week aged LDH NS/PVA dispersion. X-ray diffraction experiments show that the degree of in plane alignment of LDH NS on the PET film surface increased significantly from 70.6 ± 0.6 to 86.7 ± 0.6 (%) (100% represents complete alignment of LDH NS platelets on the film surface) for the 4 week aged dispersion compared to the freshly prepared layer. We postulate that when the Mg₂Al-LDH NS are aged in PVA the coiled PVA aggregates start to unwrap and attach onto the Mg₂Al-LDH NS through hydrogen bonding and eventually form a hydrogen bonded ordered network that facilitates the alignment of nanosheet dispersions during the coating process. Our results suggest that the ageing of inorganic nanosheet dispersions in PVA or other potential hydrogen bonding adhesive systems could be a general approach to improve the alignment of the nanosheets on the polymer film surface once applied and thus improve their performance characteristics for barrier coating applications.

Non-Ionic Surfactants for Stabilization of Polymeric Nanoparticles for Biomedical Uses

Surfactants are essential in the manufacture of polymeric nanoparticles by emulsion formation methods and to preserve the stability of carriers in liquid media. The deposition of non-ionic surfactants at the interface allows a considerable reduction of the globule of the emulsion with high biocompatibility and the possibility of oscillating the final sizes in a wide nanometric range. Therefore, this review presents an analysis of the three principal non-ionic surfactants utilized in the manufacture of polymeric nanoparticles; polysorbates, poly(vinyl alcohol), and poloxamers. We included a section on general properties and uses and a comprehensive compilation of formulations with each principal non-ionic surfactant. Then, we highlight a section on the interaction of non-ionic surfactants with biological barriers to emphasize that the function of surfactants is not limited to stabilizing the dispersion of nanoparticles and has a broad impact on pharmacokinetics. Finally, the last section corresponds to a recommendation in the experimental approach for choosing a surfactant applying the systematic methodology of Quality by Design.

Degradation of Polyvinyl Alcohol in US Wastewater Treatment Plants and Subsequent Nationwide Emission Estimate

Polyvinyl alcohol (PVA) is a water-soluble plastic commercially used in laundry and dish detergent pods (LDPs) for which a complete understanding of its fate in the environment and subsequent consequences is lacking. The objective of this study was to estimate the US nationwide emissions of PVA resulting from domestic use of LDPs, corroborated by a nationwide, online consumer survey and a literature review of its fate within conventional wastewater treatment plants (WWTPs). Peer-reviewed publications focusing on the degradation of PVA in critical processes of WWTPs were shortlisted as a part of the literature review, and subsequent degradation data was extracted and applied to a model with a set of assumptions. Survey and model results estimated that approximately 17,200 ± 5000 metric ton units per year (mtu/yr) of PVA are used from LDPs in the US, with 10,500 ± 3000 mtu/yr reaching WWTPs. Literature review data, when incorporated into our model, resulted in ~61% of PVA ending up in the environment via the sludge route and ~15.7% via the aqueous phase. PVA presence in the environment, regardless of its matrix, is a threat to the ecosystem due to the potential mobilization of heavy metals and other hydrophilic contaminants.

Highly Strong and Solvent-Resistant Cellulose Nanocrystal Photonic Films for Optical Coatings

Cellulose nanocrystals (CNCs) are powerful photonic building blocks for the fabrication of biosourced colored films. A combination of the advantages of self-assembled CNCs and multiple templating agents offers access to the development of novel physicochemical sensors, structural coatings, and optic devices. However, due to the inherent brittleness and water instability of CNC-derived materials, their further applications are widely questionable and restrictive. Here, a soft polymer of poly(vinyl alcohol) (PVA) was introduced into the rigid CNC system to balance molecular interactions, whereafter two hard/soft nanocomposites were fastened through a cross-linking reaction of glutaraldehyde (GA), resulting in a highly flexible, water-stable, and chiral nematic CNC composite film through an evaporation-induced self-assembly technique. For a 1.5 wt % GA-cross-linked 70 wt % CNC loading film, its treatment with harsh hydrophilic exposure (soaking in a strong acid, strong base, and seawater) and various organic solvents show exceptional solvent-resistant abilities. Furthermore, the film can even withstand a weight of 167 g cm^-2 without failure, which is a highly stiff and durable character. Importantly, the film remains a highly ordered chiral nematic organization, being able to act as a highly transparent substrate for selective reflection of left-handed circularly polarized light, preparing fully covered and patterned full-color coatings on various substrates. Our work paves the way for applications in low-cost, durable, and photonic cellulosic coatings.

Degradable Poly(vinyl alcohol)-Based Supramolecular Plastics with High Mechanical Strength in a Watery Environment

It is challenging to fabricate degradable poly(vinyl alcohol) (PVA)-based plastics that can be used in watery environments because PVA is soluble in water. In this study, PVA-based supramolecular plastics with excellent degradability in soil and high mechanical strength in watery environments are fabricated by the complexation of vanillin-grafted PVA (VPVA), hydrophobic humic acid (HA), and Fe³⁺ ions (hereafter denoted as VPVA-HA-Fe complexes). Large-area PVA-based plastics can be easily prepared from a solution of VPVA-HA-Fe complexes using a blade-coating method. The high-density of hydrogen bonds and coordination interactions, as well as the reinforcement of self-assembled Fe³⁺ -chelated HA nanoparticles, facilitate the fabrication of PVA-based plastics with a breaking strength of ≈85.0 MPa. After immersion in water at room temperature for 7 d, the PVA-based plastics exhibit a breaking strength of ≈26.2 MPa, which is similar to that of polyethylene in its dry state. Furthermore, owing to the reversibility of the hydrogen bonds and coordination interactions, the VPVA-HA-Fe plastics are recyclable and can be conveniently processed into plastic products with desired shapes. After being placed under soil for ≈108 d, the PVA-based plastics are completely degraded into nontoxic species without requiring manual interference.

Effect of Polyvinyl Alcohol Ligands on Supported Gold Nano-Catalysts: Morphological and Kinetics Studies

The effect of polyvinyl alcohol (PVA) stabilizers and gold nanoparticles supported on active carbon (AuNPs/AC) was investigated in this article. Polymers with different molecular weights and hydrolysis degrees have been synthesized and used, like the stabilizing agent of Au nano-catalysts obtained by the sol-immobilization method. The reduction of 4-nitrophenol with NaBH4 has been used as a model reaction to investigate the catalytic activity of synthesized Au/AC catalysts. In addition, we report several characterization techniques such as ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) in order to correlate the properties of the polymer with the metal nanoparticle size and the catalytic activity. A volcano plot was observed linking the catalytic performance with hydrolysis degree and the maximum of the curve was identified at a value of 60%. The Au:PVA-60 weight ratio was changed in order to explain how the amount of the polymer can influence catalytic properties. The effect of nitroaromatic ring substituents on the catalytic mechanism was examined by the Hammett theory. Moreover, the reusability of the catalyst was investigated, with little to no decrease in activity observed over five catalytic cycles. Morphological and kinetic studies reported in this paper reveal the effect of the PVA polymeric stabilizer properties on the size and catalytic activity of supported gold nanoparticles.

A novel esterase DacApva from Comamonas sp. strain NyZ500 with deacetylation activity for acetylated polymer polyvinyl alcohol

As a water-soluble polymer, the widely used polyvinyl alcohol (PVA) is produced from hydrolysis of polyvinyl acetate. Microbial PVA carbon backbone cleavage via a two-step reaction of dehydrogenation and hydrolysis has been well studied. Content of acetyl group is a pivotal factor affecting performance of PVA derivatives in industrial application, and deacetylation is a non-negligible part in PVA degradation. However, the genetic and biochemical studies of its deacetylation remain largely elusive. Here, Comamonas sp. strain NyZ500 was isolated for its capability of growing on acetylated PVA from activated sludge. A spontaneous PVA-utilization deficient mutant strain NyZ501 was obtained when strain NyZ500 was cultured in rich media. Comparative analysis between the genomes of these two strains revealed a fragment (containing a putative hydrolase gene dacA_pva ) deletion in NyZ501 and dacA_pva-complemented strain NyZ501 restored the ability to grow on PVA. DacA_pva, which shares 21% identity with xylan esterase AxeA1 from Prevotella ruminicola 23, is a unique deacetylase catalyzing the conversion of acetylated PVA and its derivatives to deacetylated counterparts. This indicates that strain NyZ500 utilizes acetylated PVA via acetate as a carbon source to grow. DacA_pva also possessed the deacetylation ability for acetylated xylan and the antibiotic intermediate 7-aminocephalosporanic acid (7ACA) but the enzymes for the above two compounds had no activities against PVA derivatives. This study enhanced our understanding of the diversity of microbial degradation of PVA and DacA_pva characterized here is also a potential biocatalyst for the eco-friendly biotransformation of PVA derivatives and other acetylated compounds.IMPORTANCE: Water-soluble PVA, which possesses a very robust ability to accumulate in the environment, has a very grave environmental impact due to its widespread use in industrial and household applications. On the other hand, chemical transformation of PVA derivatives is currently being carried out at high energy consumption and high pollution conditions using hazardous chemicals (such as NaOH, methanol) under high temperatures. The DacA_pva reported here performs PVA deacetylation under mild conditions, then it has a great potential to be developed into an eco-friendly biocatalyst for biotransformation of PVA derivatives. DacA_pva also has deacetylation activity for compounds other than PVA derivatives, which facilitates its development into a broad-spectrum deacetylation biocatalyst for production of certain desired compounds.

Biodegradability of Polyvinyl Alcohol Based Film Used for Liquid Detergent Capsules

Questions and potential misperceptions have arisen about the potential contribution of liquid detergent capsules to the environmental microplastics issue. The film of these detergents is highly water soluble, also in cold water, as it must fully dissolve during every type of washing process. Water-soluble grades of polyvinyl alcohol, the most commonly used detergent capsule film material, are recognised to be biodegradable. In the current paper, adequate biodegradability is confirmed by means of ready biodegradation screening tests, across a range of polyvinyl alcohol detergent grade films. The high water solubility in itself implies that detergent capsule films are not within the microplastic scope. Furthermore, their biodegradability ensures there is no concern for persistence or accumulation in the environment.

Active and Strippable PVA/Borax/NaBO3 Hydrogel for Effective Containment and Decontamination of Chemical Warfare Agents

Active gels present unique potential for the decontamination of chemical warfare agents (CWAs) as they strongly adhere to surfaces, thus allowing prolonged decontamination time. Herein, we present a decontamination hydrogel based on polyvinyl alcohol/borax, which contains sodium perborate (NaBO₃), as an in situ source of the active ingredient hydrogen peroxide. Developed as a binary formulation, this gel instantly forms and effectively sticks when sprayed on various matrices, including porous and vertically positioned matrices. The gel efficiently detoxified the CWAs sarin (GB), O-ethyl S-2-(diisopropylamino)ethyl methylphosphonothioate (VX), and sulfur mustard (HD) in test tubes (2 μL CWA/0.5 mL gel) to provide nontoxic products with reaction half-lives of <3, 45 and 113 min, respectively. The gel was also shown to efficiently decontaminate surfaces contaminated with VX (5-7 mg, 8-12 mL of gel, i.e., >99%) and to prevent GB evaporation, as proven by laboratory wind tunnel experiments. The universal decontamination abilities of this mild hydrogel, as well as its facile application and removal processes suggest that it holds high potential for future development as a new CWA decontamination tool.

Insight into functionally active bacteria in nitrification following Na+ and Mg2+ exposure based on 16S rDNA and 16S rRNA sequencing

Despite increasing interests in osmotic membrane bioreactors, the information regarding the bacterial toxicity effects of reversely transported draw solute (RTDS) is limited. In this study, two representative draw solutes (NaCl and MgCl₂) were used at different concentrations (0, 2.5, 5.0, 7.5 and 10.0 g/L) to evaluate their toxicity in a continuous nitrifying bioreactor. Notably, Mg²⁺ selectively inhibited the activity of ammonia-oxidizing bacteria (AOB), which decreased to 11.3% at 7.5 g-Mg²⁺/L. The rRNA-based analysis was more effective than the rDNA-based analysis to elucidate the relationship between active communities of nitrifying bacteria and the actual nitrifying performance. Nitrosomonas europaea, a representative AOB, was vulnerable to Mg²⁺ in comparison to Na⁺. In contrast, the dominant nitrite-oxidizing bacteria (NOB), Nitrobacter winogradskyi and Nitrolancea hollandica, maintained a relevant level of relative abundance for achieving nitrite oxidation after exposure to 10 g/L Na⁺ and Mg²⁺. This fundamental inhibition information of the draw solute can be applied to set the operational regime preventing the critical solute concentration in mixed liquor of nitrifying OMBRs.