Microbial community succession in a bioreactor modeling a souring low-temperature oil reservoir subjected to nitrate injection

Sulfur-oxidizing bacteria (SOB) and sulfate-reducing bacteria (SRB) in oil reservoir and biological control of SRB: a review

Sulfur-oxidizing bacteria (SOB) and sulfate-reducing bacteria (SRB) inhabit oilfield production systems. Sulfur oxidation driven by SOB and dissimilatory sulfate reduction driven by SRB play important roles in sulfur cycle of oil reservoirs. More importantly, hydrogen sulfide produced by SRB is an acidic, flammable, and smelly toxic gas associated with reservoir souring, corrosion of oil-production facilities, and personnel safety. Effective control of SRB is urgently needed for the oil industry. This depends on an in-depth understanding of the microbial species that drive sulfur cycle and other related microorganisms in oil reservoir environments. Here, we identified SOB and SRB in produced brines of Qizhong block (Xinjiang Oilfield, China) from metagenome sequencing data based on reported SOB and SRB, reviewed metabolic pathways of sulfur oxidation and dissimilatory sulfate reduction, and ways for SRB control. The existing issues and future research of microbial sulfur cycle and SRB control are also discussed. Knowledge of the distribution of the microbial populations, their metabolic characteristics and interactions can help to develop an effective process to harness these microorganisms for oilfield production.

Metabolic responses of thermophilic endospores to sudden heat-induced perturbation in marine sediment samples

Microbially mediated processes in a given habitat tend to be catalyzed by abundant populations that are ecologically adapted to exploit specific environmental characteristics. Typically, metabolic activities of rare populations are limited but may be stimulated in response to acute environmental stressors. Community responses to sudden changes in temperature and pressure can include suppression and activation of different populations, but these dynamics remain poorly understood. The permanently cold ocean floor hosts countless low-abundance microbes including endospores of thermophilic bacteria. Incubating sediments at high temperature resuscitates viable spores, causing the proliferation of bacterial populations. This presents a tractable system for investigating changes in a microbiome's community structure in response to dramatic environmental perturbations. Incubating permanently cold Arctic fjord sediments at 50°C for 216 h with and without volatile fatty acid amendment provoked major changes in community structure. Germination of thermophilic spores from the sediment rare biosphere was tracked using mass spectrometry-based metabolomics, radiotracer-based sulfate reduction rate measurements, and high-throughput 16S rRNA gene sequencing. Comparing community similarity at different intervals of the incubations showed distinct temporal shifts in microbial populations, depending on organic substrate amendment. Metabolite patterns indicated that amino acids and other sediment-derived organics were decomposed by fermentative Clostridia within the first 12–48 h. This fueled early and late phases of exponential increases in sulfate reduction, highlighting the cross-feeding of volatile fatty acids as electron donors for different sulfate-reducing Desulfotomaculia populations. The succession of germinated endospores triggered by sudden exposure to high temperature and controlled by nutrient availability offers a model for understanding the ecological response of dormant microbial communities following major environmental perturbations.

Bio-augmentation with dissimilatory nitrate reduction to ammonium (DNRA) driven sulfide-oxidizing bacteria enhances the durability of nitrate-mediated souring control

Biological souring (producing sulfide) is a global challenge facing anaerobic water bodies, especially the oil reservoir fluids. Nitrate injection has demonstrated great potential in souring control, and dissimilatory nitrate reduction to ammonium (DNRA) bacteria was proposed to play crucial roles in the process. How to durably control souring with nitrate amendment, however, remains undiscovered. Herein, Gordonia sp. TD-4, a DNRA-driven sulfide-oxidizing bacterium, was used to elucidate the effects of bio-augmentation with DNRA bacteria on the durability of nitrate-mediated souring control. The results revealed that nitrate amendment combined with bio-augmentation with TD-4 after souring could effectively control souring and enhance the durability of nitrate-mediated souring control, while nitrate amendment before souring failed to persistently control souring. Nitrate amendment before and after souring resulted in different evolution dynamics of nitrate-reducing bacteria. Denitrifying bacteria were enriched in reactors amended with nitrate before souring or in dissolved sulfide exhausted reactors amended with nitrate after souring. The heterotrophic denitrifying activity of denitrifying bacteria, however, decreased the durability of nitrate-mediated souring control. Comparative and functional genomics analysis identified potential niche adaptation mechanisms (autotrophic and heterotrophic nitrate/nitrite reduction, including DNRA and denitrification) of predominant SRB in nitrate-amended environments, which were responsible for the rapid resumption of sulfide accumulation after the depletion of nitrate and nitrite. Pulsed injection of nitrate combined with bio-augmentation with DNRA-driven sulfide-oxidizing bacteria was proposed as a potential method to enhance the durability of nitrate-mediated souring control. The findings were innovatively applied to simultaneous bio-demulsification and souring control of emulsified and sour produced water from the petroleum industry.

Microbially induced corrosion impacts on the oil industry

The numerous structural impacts on oil installations caused by corrosion make this issue a concern in the oil industry. Although chemical corrosion is relevant in this sector, it is indisputable that the microbial corrosion or bio-corrosion plays a preponderant role, with considerable economic losses. Microbial corrosion invariably depends on the formation of a biofilm on the attacked surface. Biofilm structures provide the conditions that favor the development of microbial groups related to corrosion. Despite the several microbial species are described as corrosive, certain groups, such as sulfate- and nitrate-reducing bacteria, acetogenic bacteria, and methanogenic archaea are the most commonly related. In spite of environmental factors influence the prevalence of certain species, it is increasingly accepted that the relationships between different species are determinant in corrosion. Such relationships can be evidenced by several surveys of microbial communities involved in bio-corrosion. Here, the main microbes related to corrosion in metallic structures used in oil installations are presented, as well as their metabolisms involved in the deterioration of metallic surfaces.

Long-Term Biocide Efficacy and Its Effect on a Souring Microbial Community

Reservoir souring, which is the production of H₂S mainly by sulfate-reducing microorganisms (SRM) in oil reservoirs, has been a long-standing issue for the oil industry. While biocides have been frequently applied to control biogenic souring, the effects of biocide treatment are usually temporary, and biocides eventually fail. The reasons for biocide failure and the long-term response of the microbial community remain poorly understood. In this study, one-time biocide treatments with glutaraldehyde (GA) and an aldehyde-releasing biocide (ARB) at low (100 ppm) and high (750 ppm) doses were individually applied to a complex SRM community, followed by 1 year of monitoring of the chemical responses and the microbial community succession. The chemical results showed that souring control failed after 7 days at a dose of 100 ppm regardless of the biocide type and lasting souring control for the entire 1-year period was achieved only with ARB at 750 ppm. Microbial community analyses suggested that the high-dose biocide treatments resulted in 1 order of magnitude lower average total microbial abundance and average SRM abundance, compared to the low-dose treatments. The recurrence of souring was associated with reduction of alpha diversity and with long-term microbial community structure changes; therefore, monitoring changes in microbial community metrics may provide early warnings of the failure of a biocide-based souring control program in the field. Furthermore, spore-forming sulfate reducers (Desulfotomaculum and Desulfurispora) were enriched and became dominant in both GA-treated groups, which could cause challenges for the design of long-lasting remedial souring control strategies.

IMPORTANCE Reservoir souring is a problem for the oil and gas industry, because H₂S corrodes the steel infrastructure, downgrades oil quality, and poses substantial risks to field personnel and the environment. Biocides have been widely applied to remedy souring, but the long-term performance of biocide treatments is hard to predict or to optimize due to limited understanding of the microbial ecology affected by biocide treatment. This study investigates the long-term biocide performance and associated changes in the abundance, diversity, and structure of the souring microbial community, thus advancing the knowledge toward a deeper understanding of the microbial ecology of biocide-treated systems and contributing to the improvement of current biocide-based souring control practices. The study showcases the potential application of incorporating microbial community analyses to forecast souring, and it highlights the long-term consequences of biocide treatment in the microbial communities, with relevance to both operators and regulators.

Iron to Gas: Versatile Multiport Flow-Column Revealed Extremely High Corrosion Potential by Methanogen-Induced Microbiologically Influenced Corrosion (Mi-MIC)

Currently, sulfate-reducing bacteria (SRB) is regarded as the main culprit of microbiologically influenced corrosion (MIC), mainly due to the low reported corrosion rates of other microorganisms. For example, the highest reported corrosion rate for methanogens is 0.065 mm/yr. However, by investigating methanogen-induced microbiologically influenced corrosion (Mi-MIC) using an in-house developed versatile multiport flow test column, extremely high corrosion rates were observed. We analyzed a large set of carbon steel beads, which were sectionally embedded into the test columns as substrates for iron-utilizing methanogen Methanobacterium IM1. After 14 days of operation using glass beads as fillers for section separation, the highest average corrosion rate of Methanobacterium IM1 was 0.2 mm/yr, which doubled that of Desulfovibrio ferrophilus IS5 and Desulfovibrio alaskensis 16109 investigated at the same conditions. At the most corroded region, nearly 80% of the beads lost 1% of their initial weight (fast-corrosion), resulting in an average corrosion rate of 0.2 mm/yr for Methanobacterium IM1-treated columns. When sand was used as filler material to mimic sediment conditions, average corrosion rates for Methanobacterium IM1 increased to 0.3 mm/yr (maximum 0.52 mm/yr) with over 83% of the beads having corrosion rates above 0.3 mm/yr. Scanning electron images of metal coupons extracted from the column showed methanogenic cells were clustered close to the metal surface. Methanobacterium IM1 is a hydrogenotrophic methanogen with higher affinity to metal than H2. Unlike SRB, Methanobacterium IM1 is not restricted to the availability of sulfate concentration in the environment. Thus, the use of the multiport flow column provided a new insight on the corrosion potential of methanogens, particularly in dynamic conditions, that offers new opportunities for monitoring and development of mitigation strategies. Overall, this study shows (1) under certain conditions methanogenic archaea can cause higher corrosion than SRB, (2) specific quantifications, i.e., maximum, average, and minimum corrosion rates can be determined, and (3) that spatial statistical evaluations of MIC can be carried out.

Towards sulfide removal and sulfate reducing bacteria inhibition: Function of biosurfactants produced by indigenous isolated nitrate reducing bacteria

The effectiveness of nitrate-mediated souring control highly depends on the interactions of sulfate reducing bacteria (SRB) and nitrate reducing bacteria (NRB). Biosurfactants produced by natural NRB are promising bio-agents for enhancing NRB competence towards SRB. However, the function of NRB-produced biosurfactants in NRB-SRB interactions remains unexplored due to the rarely successful isolation of natural biosurfactant-producing NRB. Hereby, biosurfactant-aided inhibitory control of SRB strain Desulfomicrobium escambiense ATCC 51164 by biosurfactant-producing NRB strain Pseudomonas stutzeri CX3, reported in our previous work, was investigated. Under non-sour conditions, insufficient nitrate injection resulted in limited SRB inhibition. Phospholipid fatty acid (PLFA) biomarkers traced the overall bacterial responses. Compositional PLFA patterns revealed biosurfactant addition benefitted both SRB and NRB towards stressful conditions. Under sour conditions, nitrite oxidation of sulfide proved to be the primary mechanism for sulfide removal. The subsequent elevation of redox potential and pH inhibited SRB activities. NRB-produced biosurfactants significantly enhanced SRB inhibition by NRB through more efficient sulfide removal and effective duration of nitrate in the microcosms. Biosurfactants specially produced by the NRB strain are for the first time reported to significantly strengthen SRB inhibition by NRB via reduced nitrate usage and prolonged effective duration of nitrate, which has encouraging potential in nitrate-dependent souring control.

Oil reservoir simulating bioreactors: tools for understanding petroleum microbiology

Various aspects of the oil fields in terms of microbial activity (souring, biocorrosion, etc.) and oil production (polymer flooding, etc.) have been evaluated through a variety of experiments. The primary step to study these properties in the laboratory requires the construction and operation of up-flow oil reservoir simulating bioreactors (ORSBs) in real time. Souring by reduction of sulfate to sulfide is a major contributor in enhancing corrosion of metal infrastructure used for oil production and processing. Whether the injection of biocides prevents or remediates reservoir souring can be addressed by flooding up-flow ORSBs. The potential of biopolymers/biosurfactants produced by different microbial strains have also been investigated for the role in maintaining additional oil recovery using ORSB. Additionally, key issues of polymer behavior during flooding of reservoirs could be understood during laboratory studies by monitoring the in situ porous medium rheology. Besides, the change in various ORSB parameters helps in adjudging the effect of different biosurfactants/biopolymers in enhancing oil recovery. Parameters such as permeability reduction, adsorption, interaction with porous matrix, and formation damage can be evaluated using ORSB. The analysis of earlier studies indicated that running bioreactors for longer duration of time can help in drawing conclusion with sharpness and less ambiguity. The current review discusses the construction and application of various types of ORSBs including the experimental studies employing ORSBs.

Arcobacter peruensis sp. nov., a Chemolithoheterotroph Isolated from Sulfide- and Organic-Rich Coastal Waters off Peru

Members of the epsilonproteobacterial genus Arcobacter have been identified to be potentially important sulfide oxidizers in marine coastal, seep, and stratified basin environments. In the highly productive upwelling waters off the coast of Peru, Arcobacter cells comprised 3 to 25% of the total microbial community at a near-shore station where sulfide concentrations exceeded 20 μM in bottom waters. From the chemocline where the Arcobacter population exceeded 10⁶ cells ml^-1 and where high rates of denitrification (up to 6.5 ± 0.4 μM N day^-1) and dark carbon fixation (2.8 ± 0.2 μM C day^-1) were measured, we isolated a previously uncultivated Arcobacter species, Arcobacter peruensis sp. nov. (BCCM LMG-31510). Genomic analysis showed that A. peruensis possesses genes encoding sulfide oxidation and denitrification pathways but lacks the ability to fix CO₂ via autotrophic carbon fixation pathways. Genes encoding transporters for organic carbon compounds, however, were present in the A. peruensis genome. Physiological experiments demonstrated that A. peruensis grew best on a mix of sulfide, nitrate, and acetate. Isotope labeling experiments further verified that A. peruensis completely reduced nitrate to N₂ and assimilated acetate but did not fix CO₂, thus coupling heterotrophic growth to sulfide oxidation and denitrification. Single-cell nanoscale secondary ion mass spectrometry analysis of samples taken from shipboard isotope labeling experiments also confirmed that the Arcobacter population in situ did not substantially fix CO₂ The efficient growth yield associated with the chemolithoheterotrophic metabolism of A. peruensis may allow this Arcobacter species to rapidly bloom in eutrophic and sulfide-rich waters off the coast of Peru.IMPORTANCE Our multidisciplinary approach provides new insights into the ecophysiology of a newly isolated environmental Arcobacter species, as well as the physiological flexibility within the Arcobacter genus and sulfide-oxidizing, denitrifying microbial communities within oceanic oxygen minimum zones (OMZs). The chemolithoheterotrophic species Arcobacter peruensis may play a substantial role in the diverse consortium of bacteria that is capable of coupling denitrification and fixed nitrogen loss to sulfide oxidation in eutrophic, sulfidic coastal waters. With increasing anthropogenic pressures on coastal regions, e.g., eutrophication and deoxygenation (D. Breitburg, L. A. Levin, A. Oschlies, M. Grégoire, et al., Science 359:eaam7240, 2018, https://doi.org/10.1126/science.aam7240), niches where sulfide-oxidizing, denitrifying heterotrophs such as A. peruensis thrive are likely to expand.

Resistance and Resilience of Sulfidogenic Communities in the Face of the Specific Inhibitor Perchlorate

Hydrogen sulfide is a toxic and corrosive gas, produced by the activity of sulfate-reducing microorganisms (SRM). Owing to the environmental, economic and human-health consequences of sulfide, there is interest in developing specific inhibitors of SRM. Recent studies have identified perchlorate as a promising emerging inhibitor. The aim of this work is to quantitatively dissect the inhibitory dynamics of perchlorate. Sulfidogenic mixed continuous-flow systems were treated with perchlorate. SRM number, sulfide production and community structure were monitored pre-, during and post-treatment. The data generated was compared to a simple mathematical model, where SRM growth slows as a result of inhibition. The experimental data supports the interpretation that perchlorate largely acts to suppress SRM growth rates, rendering planktonic SRM increasingly susceptible to wash-out. Surface-attachment was identified as an important parameter preventing SRM wash-out and thus governing inhibitory dynamics. Our study confirmed the lesser depletion of surface-attached SRM as compared to planktonic SRM during perchlorate treatment. Indirect effects of perchlorate (bio-competitive exclusion of SRM by dissimilatory perchlorate-reducing bacteria, DPRB) were also assayed by amending reactors with DPRB. Indeed, low concentrations of perchlorate coupled with DRPB amendment can drive sulfide concentrations to zero. Further, inhibition in a complex community was compared to that in a pure culture, highlighting similarities and differences between the two scenarios. Finally, we quantified susceptibility to perchlorate across SRM in various culture conditions, showing that prediction of complex behavior in continuous systems from batch results is possible. This study thus provides an overview of the sensitivity of sulfidogenic communities to perchlorate, as well as mechanisms underlying these patterns.

Metabolites of an Oil Field Sulfide-Oxidizing, Nitrate-Reducing Sulfurimonas sp. Cause Severe Corrosion

Ambiguous reports of corrosion problems associated with the injection of nitrate for souring control necessitate a deeper understanding of this frequently applied bioengineering strategy. Sulfide-oxidizing, nitrate-reducing bacteria have been proposed as key culprits, despite the underlying microbial corrosion mechanisms remaining insufficiently understood. This study provides a comprehensive characterization of how individual metabolic intermediates of the microbial nitrogen and sulfur cycles can impact the integrity of carbon steel infrastructure. The results help explain the dramatic increases seen at times in corrosion rates observed during nitrate injection in field and laboratory trials and point to strategies for reducing adverse integrity-related side effects of nitrate-based souring mitigation.

Oil reservoir souring and associated material integrity challenges are of great concern to the petroleum industry. The bioengineering strategy of nitrate injection has proven successful for controlling souring in some cases, but recent reports indicate increased corrosion in nitrate-treated produced water reinjection facilities. Sulfide-oxidizing, nitrate-reducing bacteria (soNRB) have been suggested to be the cause of such corrosion. Using the model soNRB Sulfurimonas sp. strain CVO obtained from an oil field, we conducted a detailed analysis of soNRB-induced corrosion at initial nitrate-to-sulfide (N/S) ratios relevant to oil field operations. The activity of strain CVO caused severe corrosion rates of up to 0.27 millimeters per year (mm y⁻¹) and up to 60-μm-deep pitting within only 9 days. The highest corrosion during the growth of strain CVO was associated with the production of zero-valent sulfur during sulfide oxidation and the accumulation of nitrite, when initial N/S ratios were high. Abiotic corrosion tests with individual metabolites confirmed biogenic zero-valent sulfur and nitrite as the main causes of corrosion under the experimental conditions. Mackinawite (FeS) deposited on carbon steel surfaces accelerated abiotic reduction of both sulfur and nitrite, exacerbating corrosion. Based on these results, a conceptual model for nitrate-mediated corrosion by soNRB is proposed.

IMPORTANCE Ambiguous reports of corrosion problems associated with the injection of nitrate for souring control necessitate a deeper understanding of this frequently applied bioengineering strategy. Sulfide-oxidizing, nitrate-reducing bacteria have been proposed as key culprits, despite the underlying microbial corrosion mechanisms remaining insufficiently understood. This study provides a comprehensive characterization of how individual metabolic intermediates of the microbial nitrogen and sulfur cycles can impact the integrity of carbon steel infrastructure. The results help explain the dramatic increases seen at times in corrosion rates observed during nitrate injection in field and laboratory trials and point to strategies for reducing adverse integrity-related side effects of nitrate-based souring mitigation.

Comparison of Nitrate and Perchlorate in Controlling Sulfidogenesis in Heavy Oil-Containing Bioreactors

Control of microbial reduction of sulfate to sulfide in oil reservoirs (a process referred to as souring) with nitrate has been researched extensively. Nitrate is reduced to nitrite, which is a strong inhibitor of sulfate-reducing bacteria (SRB). Perchlorate has been proposed as an alternative souring control agent. It is reduced to chlorate (ClO3 -) and chlorite (ClO2 -), which is dismutated to chloride and O2. These can react with sulfide to form sulfur. Chlorite is also highly biocidal. Here we compared the effectiveness of perchlorate and nitrate in inhibiting SRB activity in medium containing heavy oil from the Medicine Hat Glauconitic C (MHGC) field, which has a low reservoir temperature and is injected with nitrate to control souring. Using acetate, propionate and butyrate as electron donors, perchlorate-reducing bacteria (PRB) were obtained in enrichment culture and perchlorate-reducing Magnetospirillum spp. were isolated from MHGC produced waters. In batch experiments with MHGC oil as the electron donor, nitrate was reduced to nitrite and inhibited sulfate reduction. However, perchlorate was not reduced and did not inhibit sulfate reduction in these incubations. Bioreactor experiments were conducted with sand-packed glass columns, containing MHGC oil and inoculated with an oil-grown mesophilic SRB enrichment. Once active souring (reduction of 2 mM sulfate to sulfide) was observed, these were treated with nitrate and/or perchlorate. As in the batch experiments, 4 mM nitrate completely inhibited sulfide production, while partial inhibition occurred with 1 and 2 mM nitrate, but injection of 4 mM perchlorate did not inhibit sulfate reduction and perchlorate was not reduced. The enriched and isolated PRB were unable to use heavy oil components, like alkylbenzenes, which were readily used by nitrate-reducing bacteria. Hence perchlorate, injected into a low temperature heavy oil reservoir like the MHGC, may not be reduced to toxic intermediates making nitrate a preferable souring control agent.

Compatibility between weak gel and microorganisms in weak gel-assisted microbial enhanced oil recovery

To investigate weak gel-assisted microbial flooding in Block Wang Long Zhuang in the Jiangsu Oilfield, the compatibility of weak gel and microbe was evaluated using laboratory experiments. Bacillus sp. W5 was isolated from the formation water in Block Wang Long Zhuang. The rate of oil degradation reached 178 mg/day, and the rate of viscosity reduction reached 75.3%. Strain W5 could produce lipopeptide with a yield of 1254 mg/L. Emulsified crude oil was dispersed in the microbial degradation system, and the average diameter of the emulsified oil particles was 18.54 μm. Bacillus sp. W5 did not affect the rheological properties of the weak gel, and the presence of the weak gel did not significantly affect bacterial reproduction (as indicated by an unchanged microbial biomass), emulsification (surface tension is 35.56 mN/m and average oil particles size is 21.38 μm), oil degradation (162 mg/day) and oil viscosity reduction (72.7%). Core-flooding experiments indicated oil recovery of 23.6% when both weak gel and Bacillus sp. W5 were injected into the system, 14.76% when only the weak gel was injected, and 9.78% with strain W5 was injected without the weak gel. The results demonstrate good compatibility between strains W5 and the weak gel and highlight the application potential of weak gel-assisted microbial flooding.

Comprehensive Analysis of Changes in Crude Oil Chemical Composition during Biosouring and Treatments

Biosouring in crude oil reservoirs by sulfate-reducing microbial communities (SRCs) results in hydrogen sulfide production, precipitation of metal sulfide complexes, increased industrial costs of petroleum production, and exposure issues for personnel. Potential treatment strategies include nitrate or perchlorate injections into reservoirs. Gas chromatography with vacuum ultraviolet ionization and high-resolution time-of-flight mass spectrometry (GC-VUV-HTOF) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) combined with electrospray ionization were applied in this study to identify hydrocarbon degradation patterns and product formations in crude oil samples from biosoured, nitrate-treated, and perchlorate-treated bioreactor column experiments. Crude oil hydrocarbons were selectively transformed based on molecular weight and compound class in the biosouring control environment. Both the nitrate and the perchlorate treatments significantly reduced sulfide production; however, the nitrate treatment enhanced crude oil biotransformation, while the perchlorate treatment inhibited crude oil biotransformation. Nitrogen- and oxygen-containing biodegradation products, particularly with chemical formulas consistent with monocarboxylic and dicarboxylic acids containing 10-60 carbon atoms, were observed in the oil samples from both the souring control and the nitrate-treated columns but were not observed in the oil samples from the perchlorate-treated column. These results demonstrate that hydrocarbon degradation and product formation of crude oil can span hydrocarbon isomers and molecular weights up to C₆₀ and double-bond equivalent classes ranging from straight-chain alkanes to polycyclic aromatic hydrocarbons. Our results also strongly suggest that perchlorate injections may provide a preferred strategy to treat biosouring through inhibition of biotransformation.

Control of microbial sulfide production by limiting sulfate dispersal in a water-injected oil field

Oil production by water injection often involves the use of makeup water to replace produced oil. Sulfate in makeup water is reduced by sulfate-reducing bacteria to sulfide, a process referred to as souring. In the MHGC field souring was caused by using makeup water with 4mM (384ppm) sulfate. Mixing with sulfate-free produced water gave injection water with 0.8mM sulfate. This was amended with nitrate to limit souring and was then distributed fieldwide. The start-up of an enhanced-oil-recovery pilot caused all sulfate-containing makeup water to be used for dissolution of polymer, which was then injected into a limited region of the field. Produced water from this pilot contained 10% of the injected sulfate concentration as sulfide, but was free of sulfate. Its use as makeup water in the main water plant of the field caused injection water sulfate to drop to zero. This in turn strongly decreased produced sulfide concentrations throughout the field and allowed a decreased injection of nitrate. The decreased injection of sulfate and nitrate caused major changes in the microbial community of produced waters. Limiting sulfate dispersal into a reservoir, which acts as a sulfate-removing biofilter, is thus a powerful method to decrease souring.

Effect of Thermophilic Nitrate Reduction on Sulfide Production in High Temperature Oil Reservoir Samples

Oil fields can experience souring, the reduction of sulfate to sulfide by sulfate-reducing microorganisms. At the Terra Nova oil field near Canada's east coast, with a reservoir temperature of 95°C, souring was indicated by increased hydrogen sulfide in produced waters (PW). Microbial community analysis by 16S rRNA gene sequencing showed the hyperthermophilic sulfate-reducing archaeon Archaeoglobus in Terra Nova PWs. Growth enrichments in sulfate-containing media at 55-70°C with lactate or volatile fatty acids yielded the thermophilic sulfate-reducing bacterium (SRB) Desulfotomaculum. Enrichments at 30-45°C in nitrate-containing media indicated the presence of mesophilic nitrate-reducing bacteria (NRB), which reduce nitrate without accumulation of nitrite, likely to N2. Thermophilic NRB (tNRB) of the genera Marinobacter and Geobacillus were detected and isolated at 30-50°C and 40-65°C, respectively, and only reduced nitrate to nitrite. Added nitrite strongly inhibited the isolated thermophilic SRB (tSRB) and tNRB and SRB could not be maintained in co-culture. Inhibition of tSRB by nitrate in batch and continuous cultures required inoculation with tNRB. The results suggest that nitrate injected into Terra Nova is reduced to N2 at temperatures up to 45°C but to nitrite only in zones from 45 to 65°C. Since the hotter zones of the reservoir (65-80°C) are inhabited by thermophilic and hyperthermophilic sulfate reducers, souring at these temperatures might be prevented by nitrite production if nitrate-reducing zones of the system could be maintained at 45-65°C.

Control of Sulfide Production in High Salinity Bakken Shale Oil Reservoirs by Halophilic Bacteria Reducing Nitrate to Nitrite

Microbial communities in shale oil fields are still poorly known. We obtained samples of injection, produced and facility waters from a Bakken shale oil field in Saskatchewan, Canada with a resident temperature of 60°C. The injection water had a lower salinity (0.7 Meq of NaCl) than produced or facility waters (0.6-3.6 Meq of NaCl). Salinities of the latter decreased with time, likely due to injection of low salinity water, which had 15-30 mM sulfate. Batch cultures of field samples showed sulfate-reducing and nitrate-reducing bacteria activities at different salinities (0, 0.5, 0.75, 1.0, 1.5, and 2.5 M NaCl). Notably, at high salinity nitrite accumulated, which was not observed at low salinity, indicating potential for nitrate-mediated souring control at high salinity. Continuous culture chemostats were established in media with volatile fatty acids (a mixture of acetate, propionate and butyrate) or lactate as electron donor and nitrate or sulfate as electron acceptor at 0.5 to 2.5 M NaCl. Microbial community analyses of these cultures indicated high proportions of Halanaerobium, Desulfovermiculus, Halomonas, and Marinobacter in cultures at 2.5 M NaCl, whereas Desulfovibrio, Geoalkalibacter, and Dethiosulfatibacter were dominant at 0.5 M NaCl. Use of bioreactors to study the effect of nitrate injection on sulfate reduction showed that accumulation of nitrite inhibited SRB activity at 2.5 M but not at 0.5 M NaCl. High proportions of Halanaerobium and Desulfovermiculus were found at 2.5 M NaCl in the absence of nitrate, whereas high proportions of Halomonas and no SRB were found in the presence of nitrate. A diverse microbial community dominated by the SRB Desulfovibrio was observed at 0.5 M NaCl both in the presence and absence of nitrate. Our results suggest that nitrate injection can prevent souring provided that the salinity is maintained at a high level. Thus, reinjection of high salinity produced water amended with nitrate maybe be a cost effective method for souring control.

Diversity and Composition of Sulfate-Reducing Microbial Communities Based on Genomic DNA and RNA Transcription in Production Water of High Temperature and Corrosive Oil Reservoir

Deep subsurface petroleum reservoir ecosystems harbor a high diversity of microorganisms, and microbial influenced corrosion is a major problem for the petroleum industry. Here, we used high-throughput sequencing to explore the microbial communities based on genomic 16S rDNA and metabolically active 16S rRNA analyses of production water samples with different extents of corrosion from a high-temperature oil reservoir. Results showed that Desulfotignum and Roseovarius were the most abundant genera in both genomic and active bacterial communities of all the samples. Both genomic and active archaeal communities were mainly composed of Archaeoglobus and Methanolobus. Within both bacteria and archaea, the active and genomic communities were compositionally distinct from one another across the different oil wells (bacteria p = 0.002; archaea p = 0.01). In addition, the sulfate-reducing microorganisms (SRMs) were specifically assessed by Sanger sequencing of functional genes aprA and dsrA encoding the enzymes adenosine-5'-phosphosulfate reductase and dissimilatory sulfite reductase, respectively. Functional gene analysis indicated that potentially active Archaeoglobus, Desulfotignum, Desulfovibrio, and Thermodesulforhabdus were frequently detected, with Archaeoglobus as the most abundant and active sulfate-reducing group. Canonical correspondence analysis revealed that the SRM communities in petroleum reservoir system were closely related to pH of the production water and sulfate concentration. This study highlights the importance of distinguishing the metabolically active microorganisms from the genomic community and extends our knowledge on the active SRM communities in corrosive petroleum reservoirs.

Use of Acetate, Propionate, and Butyrate for Reduction of Nitrate and Sulfate and Methanogenesis in Microcosms and Bioreactors Simulating an Oil Reservoir

Acetate, propionate, and butyrate (volatile fatty acids [VFA]) occur in oil field waters and are frequently used for microbial growth of oil field consortia. We determined the kinetics of use of these VFA components (3 mM each) by an anaerobic oil field consortium in microcosms containing 2 mM sulfate and 0, 4, 6, 8, or 13 mM nitrate. Nitrate was reduced first, with a preference for acetate and propionate. Sulfate reduction then proceeded with propionate (but not butyrate) as the electron donor, whereas the fermentation of butyrate (but not propionate) was associated with methanogenesis. Microbial community analyses indicated that Paracoccus and Thauera (Paracoccus-Thauera), Desulfobulbus, and Syntrophomonas-Methanobacterium were the dominant taxa whose members catalyzed these three processes. Most-probable-number assays showed the presence of up to 10⁷/ml of propionate-oxidizing sulfate-reducing bacteria (SRB) in waters from the Medicine Hat Glauconitic C field. Bioreactors with the same concentrations of sulfate and VFA responded similarly to increasing concentrations of injected nitrate as observed in the microcosms: sulfide formation was prevented by adding approximately 80% of the nitrate dose needed to completely oxidize VFA to CO₂ in both. Thus, this work has demonstrated that simple time-dependent observations of the use of acetate, propionate, and butyrate for nitrate reduction, sulfate reduction, and methanogenesis in microcosms are a good proxy for these processes in bioreactors, monitoring of which is more complex.IMPORTANCE Oil field volatile fatty acids acetate, propionate, and butyrate were specifically used for nitrate reduction, sulfate reduction, and methanogenic fermentation. Time-dependent analyses of microcosms served as a good proxy for these processes in a bioreactor, mimicking a sulfide-producing (souring) oil reservoir: 80% of the nitrate dose required to oxidize volatile fatty acids to CO₂ was needed to prevent souring in both. Our data also suggest that propionate is a good substrate to enumerate oil field SRB.

Nitrate-Mediated Microbially Enhanced Oil Recovery (N-MEOR) from model upflow bioreactors

Microbially Enhanced Oil Recovery (MEOR) can enhance oil production with less energy input and less costs than other technologies. The present study used different aqueous electron donors (acetate, glucose, molasses) and an aqueous electron acceptor (nitrate) to stimulate growth of heterotrophic nitrate reducing bacteria (hNRB) to improve production of oil. Initial flooding of columns containing heavy oil (viscosity of 3400cP at 20°C) with CSBK (Coleville synthetic brine medium) produced 0.5 pore volume (PV) of oil. Bioreactors were then inoculated with hNRB with 5.8g/L of molasses and 0, 10, 20, 40, 60 or 80mM nitrate, as well as with 17mM glucose or 57mM acetate and 80mM nitrate. During incubations no oil was produced in the bioreactors that received 5.8g/L of molasses and 0, 10, 20, 40 or 60mM nitrate. However, the bioreactors injected with 5.8g/L of molasses, 17mM glucose or 57mM acetate and 80mM nitrate produced 13.9, 11.3±3.1 and 17.8±6.6% of residual oil, respectively. The significant production of oil from these bioreactors may be caused by N₂-CO₂ gas production. Following continued injection with CSBK without nitrate, subsequent elution of significant residual oil (5-30%) was observed. These results also indicate possible involvement of fermentation products (organic acids, alcohols) to enhance heavy oil recovery.

Reactive Transport Model of Sulfur Cycling as Impacted by Perchlorate and Nitrate Treatments

Microbial souring in oil reservoirs produces toxic, corrosive hydrogen sulfide through microbial sulfate reduction, often accompanying (sea)water flooding during secondary oil recovery. With data from column experiments as constraints, we developed the first reactive-transport model of a new candidate inhibitor, perchlorate, and compared it with the commonly used inhibitor, nitrate. Our model provided a good fit to the data, which suggest that perchlorate is more effective than nitrate on a per mole of inhibitor basis. Critically, we used our model to gain insight into the underlying competing mechanisms controlling the action of each inhibitor. This analysis suggested that competition by heterotrophic perchlorate reducers and direct inhibition by nitrite produced from heterotrophic nitrate reduction were the most important mechanisms for the perchlorate and nitrate treatments, respectively, in the modeled column experiments. This work demonstrates modeling to be a powerful tool for increasing and testing our understanding of reservoir-souring generation, prevention, and remediation processes, allowing us to incorporate insights derived from laboratory experiments into a framework that can potentially be used to assess risk and design optimal treatment schemes.

Spatial isolation and environmental factors drive distinct bacterial and archaeal communities in different types of petroleum reservoirs in China

To investigate the spatial distribution of microbial communities and their drivers in petroleum reservoir environments, we performed pyrosequencing of microbial partial 16S rRNA, derived from 20 geographically separated water-flooding reservoirs, and two reservoirs that had not been flooded, in China. The results indicated that distinct underground microbial communities inhabited the different reservoirs. Compared with the bacteria, archaeal alpha-diversity was not strongly correlated with the environmental variables. The variation of the bacterial and archaeal community compositions was affected synthetically, by the mining patterns, spatial isolation, reservoir temperature, salinity and pH of the formation brine. The environmental factors explained 64.22% and 78.26% of the total variance for the bacterial and archaeal communities, respectively. Despite the diverse community compositions, shared populations (48 bacterial and 18 archaeal genera) were found and were dominant in most of the oilfields. Potential indigenous microorganisms, including Carboxydibrachium, Thermosinus, and Neptunomonas, were only detected in a reservoir that had not been flooded with water. This study indicates that: 1) the environmental variation drives distinct microbial communities in different reservoirs; 2) compared with the archaea, the bacterial communities were highly heterogeneous within and among the reservoirs; and 3) despite the community variation, some microorganisms are dominant in multiple petroleum reservoirs.

Control of Microbial Sulfide Production with Biocides and Nitrate in Oil Reservoir Simulating Bioreactors

Oil reservoir souring by the microbial reduction of sulfate to sulfide is unwanted, because it enhances corrosion of metal infrastructure used for oil production and processing. Reservoir souring can be prevented or remediated by the injection of nitrate or biocides, although injection of biocides into reservoirs is not commonly done. Whether combined application of these agents may give synergistic reservoir souring control is unknown. In order to address this we have used up-flow sand-packed bioreactors injected with 2 mM sulfate and volatile fatty acids (VFA, 3 mM each of acetate, propionate and butyrate) at a flow rate of 3 or 6 pore volumes (PV) per day. Pulsed injection of the biocides glutaraldehyde (Glut), benzalkonium chloride (BAC) and cocodiamine was used to control souring. Souring control was determined as the recovery time (RT) needed to re-establish an aqueous sulfide concentration of 0.8–1 mM (of the 1.7–2 mM before the pulse). Pulses were either for a long time (120 h) at low concentration (long-low) or for a short time (1 h) at high concentration (short-high). The short-high strategy gave better souring control with Glut, whereas the long-low strategy was better with cocodiamine. Continuous injection of 2 mM nitrate alone was not effective, because 3 mM VFA can fully reduce both 2 mM nitrate to nitrite and N₂ and, subsequently, 2 mM sulfate to sulfide. No synergy was observed for short-high pulsed biocides and continuously injected nitrate. However, use of continuous nitrate and long-low pulsed biocide gave synergistic souring control with BAC and Glut, as indicated by increased RTs in the presence, as compared to the absence of nitrate. Increased production of nitrite, which increases the effectiveness of souring control by biocides, is the most likely cause for this synergy.

Microbially Enhanced Oil Recovery by Sequential Injection of Light Hydrocarbon and Nitrate in Low- And High-Pressure Bioreactors

Microbially enhanced oil recovery (MEOR) often involves injection of aqueous molasses and nitrate to stimulate resident or introduced bacteria. Use of light oil components like toluene, as electron donor for nitrate-reducing bacteria (NRB), offers advantages but at 1-2 mM toluene is limiting in many heavy oils. Because addition of toluene to the oil increased reduction of nitrate by NRB, we propose an MEOR technology, in which water amended with light hydrocarbon below the solubility limit (5.6 mM for toluene) is injected to improve the nitrate reduction capacity of the oil along the water flow path, followed by injection of nitrate, other nutrients (e.g., phosphate) and a consortium of NRB, if necessary. Hydrocarbon- and nitrate-mediated MEOR was tested in low- and high-pressure, water-wet sandpack bioreactors with 0.5 pore volumes of residual oil in place (ROIP). Compared to control bioreactors, those with 11-12 mM of toluene in the oil (gained by direct addition or by aqueous injection) and 80 mM of nitrate in the aqueous phase produced 16.5 ± 4.4% of additional ROIP (N = 10). Because toluene is a cheap commodity chemical, HN-MEOR has the potential to be a cost-effective method for additional oil production even in the current low oil price environment.

A Post-Genomic View of the Ecophysiology, Catabolism and Biotechnological Relevance of Sulphate-Reducing Prokaryotes

Dissimilatory sulphate reduction is the unifying and defining trait of sulphate-reducing prokaryotes (SRP). In their predominant habitats, sulphate-rich marine sediments, SRP have long been recognized to be major players in the carbon and sulphur cycles. Other, more recently appreciated, ecophysiological roles include activity in the deep biosphere, symbiotic relations, syntrophic associations, human microbiome/health and long-distance electron transfer. SRP include a high diversity of organisms, with large nutritional versatility and broad metabolic capacities, including anaerobic degradation of aromatic compounds and hydrocarbons. Elucidation of novel catabolic capacities as well as progress in the understanding of metabolic and regulatory networks, energy metabolism, evolutionary processes and adaptation to changing environmental conditions has greatly benefited from genomics, functional OMICS approaches and advances in genetic accessibility and biochemical studies. Important biotechnological roles of SRP range from (i) wastewater and off gas treatment, (ii) bioremediation of metals and hydrocarbons and (iii) bioelectrochemistry, to undesired impacts such as (iv) souring in oil reservoirs and other environments, and (v) corrosion of iron and concrete. Here we review recent advances in our understanding of SRPs focusing mainly on works published after 2000. The wealth of publications in this period, covering many diverse areas, is a testimony to the large environmental, biogeochemical and technological relevance of these organisms and how much the field has progressed in these years, although many important questions and applications remain to be explored.

Independence of nitrate and nitrite inhibition of Desulfovibrio vulgaris Hildenborough and use of nitrite as a substrate for growth

Sulfate-reducing microbes, such as Desulfovibrio vulgaris Hildenborough, cause “souring” of petroleum reservoirs through produced sulfide and precipitate heavy metals, either as sulfides or by alteration of the metal reduction state. Thus, inhibitors of these microbes, including nitrate and nitrite ions, are studied in order to limit their impact. Nitrite is a potent inhibitor of sulfate reducers, and it has been suggested that nitrate does not inhibit these microbes directly but by reduction to nitrite, which serves as the ultimate inhibitor. Here we provide evidence that nitrate inhibition of D. vulgaris can be independent of nitrite production. We also show that D. vulgaris can use nitrite as a nitrogen source or terminal electron acceptor for growth. Moreover, we report that use of nitrite as a terminal electron acceptor requires nitrite reductase (nrfA) as a D. vulgaris nrfA mutant cannot respire nitrite but remains capable of utilizing nitrite as a nitrogen source. These results illuminate previously uncharacterized metabolic abilities of D. vulgaris that may allow niche expansion in low-sulfate environments. Understanding these abilities may lead to better control of sulfate-reducing bacteria in industrial settings and more accurate prediction of their interactions in the environment.

Microbial redox processes in deep subsurface environments and the potential application of (per)chlorate in oil reservoirs

The ability of microorganisms to thrive under oxygen-free conditions in subsurface environments relies on the enzymatic reduction of oxidized elements, such as sulfate, ferric iron, or CO₂, coupled to the oxidation of inorganic or organic compounds. A broad phylogenetic and functional diversity of microorganisms from subsurface environments has been described using isolation-based and advanced molecular ecological techniques. The physiological groups reviewed here comprise iron-, manganese-, and nitrate-reducing microorganisms. In the context of recent findings also the potential of chlorate and perchlorate [jointly termed (per)chlorate] reduction in oil reservoirs will be discussed. Special attention is given to elevated temperatures that are predominant in the deep subsurface. Microbial reduction of (per)chlorate is a thermodynamically favorable redox process, also at high temperature. However, knowledge about (per)chlorate reduction at elevated temperatures is still scarce and restricted to members of the Firmicutes and the archaeon Archaeoglobus fulgidus. By analyzing the diversity and phylogenetic distribution of functional genes in (meta)genome databases and combining this knowledge with extrapolations to earlier-made physiological observations we speculate on the potential of (per)chlorate reduction in the subsurface and more precisely oil fields. In addition, the application of (per)chlorate for bioremediation, souring control, and microbial enhanced oil recovery are addressed.

Inhibition of microbial sulfate reduction in a flow-through column system by (per)chlorate treatment

Microbial sulfate reduction is a primary cause of oil reservoir souring. Here we show that amendment with chlorate or perchlorate [collectively (per)chlorate] potentially resolves this issue. Triplicate packed columns inoculated with marine sediment were flushed with coastal water amended with yeast extract and one of nitrate, chlorate, or perchlorate. Results showed that although sulfide production was dramatically reduced by all treatments, effluent sulfide was observed in the nitrate (10 mM) treatment after an initial inhibition period. In contrast, no effluent sulfide was observed with (per)chlorate (10 mM). Microbial community analyses indicated temporal community shifts and phylogenetic clustering by treatment. Nitrate addition stimulated Xanthomonadaceae and Rhizobiaceae growth, supporting their role in nitrate metabolism. (Per)chlorate showed distinct effects on microbial community structure compared with nitrate and resulted in a general suppression of the community relative to the untreated control combined with a significant decrease in sulfate reducing species abundance indicating specific toxicity. Furthermore, chlorate stimulated Pseudomonadaceae and Pseudoalteromonadaceae, members of which are known chlorate respirers, suggesting that chlorate may also control sulfidogenesis by biocompetitive exclusion of sulfate-reduction. Perchlorate addition stimulated Desulfobulbaceae and Desulfomonadaceae, which contain sulfide oxidizing and elemental sulfur-reducing species respectively, suggesting that effluent sulfide concentrations may be controlled through sulfur redox cycling in addition to toxicity and biocompetitive exclusion. Sulfur isotope analyses further support sulfur cycling in the columns, even when sulfide is not detected. This study indicates that (per)chlorate show great promise as inhibitors of sulfidogenesis in natural communities and provides insight into which organisms and respiratory processes are involved.

Microbial abundance and community composition influence production performance in a low-temperature petroleum reservoir

Enhanced oil recovery using indigenous microorganisms has been successfully applied in the petroleum industry, but the role of microorganisms remains poorly understood. Here, we investigated the relationship between microbial population dynamics and oil production performance during a water flooding process coupled with nutrient injection in a low-temperature petroleum reservoir. Samples were collected monthly over a two-year period. The microbial composition of samples was determined using 16S rRNA gene pyrosequencing and real-time quantitative polymerase chain reaction analyses. Our results indicated that the microbial community structure in each production well microhabitat was dramatically altered during flooding with eutrophic water. As well as an increase in the density of microorganisms, biosurfactant producers, such as Pseudomonas, Alcaligenes, Rhodococcus, and Rhizobium, were detected in abundance. Furthermore, the density of these microorganisms was closely related to the incremental oil production. Oil emulsification and changes in the fluid-production profile were also observed. In addition, we found that microbial community structure was strongly correlated with environmental factors, such as water content and total nitrogen. These results suggest that injected nutrients increase the abundance of microorganisms, particularly biosurfactant producers. These bacteria and their metabolic products subsequently emulsify oil and alter fluid-production profiles to enhance oil recovery.

Phoenix 2: a locally installable large-scale 16S rRNA gene sequence analysis pipeline with Web interface

We have developed Phoenix 2, a ribosomal RNA gene sequence analysis pipeline, which can be used to process large-scale datasets consisting of more than one hundred environmental samples and containing more than one million reads collectively. Rapid handling of large datasets is made possible by the removal of redundant sequences, pre-partitioning of sequences, parallelized clustering per partition, and subsequent merging of clusters. To build the pipeline, we have used a combination of open-source software tools and custom-developed Perl scripts. For our project we utilize hardware-accelerated searches, but it is possible to reconfigure the analysis pipeline for use with generic computing infrastructure only, with a considerable reduction in speed. The set of analysis results produced by Phoenix 2 is comprehensive, including taxonomic annotations using multiple methods, alpha diversity indices, beta diversity measurements, and a number of visualizations. To date, the pipeline has been used to analyze more than 1500 environmental samples from a wide variety of microbial communities, which are part of our Hydrocarbon Metagenomics Project (http://www.hydrocarbonmetagenomics.com). The software package can be installed as a local software suite with a Web interface. Phoenix 2 is freely available from http://sourceforge.net/projects/phoenix2.

Acetate production from oil under sulfate-reducing conditions in bioreactors injected with sulfate and nitrate

Oil production by water injection can cause souring in which sulfate in the injection water is reduced to sulfide by resident sulfate-reducing bacteria (SRB). Sulfate (2 mM) in medium injected at a rate of 1 pore volume per day into upflow bioreactors containing residual heavy oil from the Medicine Hat Glauconitic C field was nearly completely reduced to sulfide, and this was associated with the generation of 3 to 4 mM acetate. Inclusion of 4 mM nitrate inhibited souring for 60 days, after which complete sulfate reduction and associated acetate production were once again observed. Sulfate reduction was permanently inhibited when 100 mM nitrate was injected by the nitrite formed under these conditions. Pulsed injection of 4 or 100 mM nitrate inhibited sulfate reduction temporarily. Sulfate reduction resumed once nitrate injection was stopped and was associated with the production of acetate in all cases. The stoichiometry of acetate formation (3 to 4 mM formed per 2 mM sulfate reduced) is consistent with a mechanism in which oil alkanes and water are metabolized to acetate and hydrogen by fermentative and syntrophic bacteria (K. Zengler et al., Nature 401:266-269, 1999), with the hydrogen being used by SRB to reduce sulfate to sulfide. In support of this model, microbial community analyses by pyrosequencing indicated SRB of the genus Desulfovibrio, which use hydrogen but not acetate as an electron donor for sulfate reduction, to be a major community component. The model explains the high concentrations of acetate that are sometimes found in waters produced from water-injected oil fields.

In situ detection of anaerobic alkane metabolites in subsurface environments

Alkanes comprise a substantial fraction of crude oil and refined fuels. As such, they are prevalent within deep subsurface fossil fuel deposits and in shallow subsurface environments such as aquifers that are contaminated with hydrocarbons. These environments are typically anaerobic, and host diverse microbial communities that can potentially use alkanes as substrates. Anaerobic alkane biodegradation has been reported to occur under nitrate-reducing, sulfate-reducing, and methanogenic conditions. Elucidating the pathways of anaerobic alkane metabolism has been of interest in order to understand how microbes can be used to remediate contaminated sites. Alkane activation primarily occurs by addition to fumarate, yielding alkylsuccinates, unique anaerobic metabolites that can be used to indicate in situ anaerobic alkane metabolism. These metabolites have been detected in hydrocarbon-contaminated shallow aquifers, offering strong evidence for intrinsic anaerobic bioremediation. Recently, studies have also revealed that alkylsuccinates are present in oil and coal seam production waters, indicating that anaerobic microbial communities can utilize alkanes in these deeper subsurface environments. In many crude oil reservoirs, the in situ anaerobic metabolism of hydrocarbons such as alkanes may be contributing to modern-day detrimental effects such as oilfield souring, or may lead to more beneficial technologies such as enhanced energy recovery from mature oilfields. In this review, we briefly describe the key metabolic pathways for anaerobic alkane (including n-alkanes, isoalkanes, and cyclic alkanes) metabolism and highlight several field reports wherein alkylsuccinates have provided evidence for anaerobic in situ alkane metabolism in shallow and deep subsurface environments.

Succession of Deferribacteres and Epsilonproteobacteria through a nitrate-treated high-temperature oil production facility

Members of Epsilonproteobacteria and Deferribacteres have been implied in nitrate-induced souring control in high-temperature oil production facilities. Here we report on their diversity and abundance in the injection and production part of a nitrate-treated, off-shore oil facility (Halfdan, Denmark) and aimed to assess their potential in souring control. Nitrate addition to deoxygenated seawater shifted the low-biomass seawater community dominated by Gammaproteobacteria closely affiliated with the genus Colwellia to a high-biomass community with significantly higher species richness. Epsilonproteobacteria accounted for less than 1% of the total bacterial community in the nitrate-amended injection water and were most likely outcompeted by putative nitrate-reducing, methylotrophic Gammaproteobacteria of the genus Methylophaga. Reservoir passage and recovery of the oil resulted in a significant change in the bacterial community. Members of the thermophilic Deferribacteres were the second major fraction of the bacterial community in the production water (~30% of the total bacterial community). They were not found in the injection water and were therefore assumed to be indigenous to the reservoir. Additional diversity analysis and targeted quantification of periplasmic nitrate reductase (napA) genes indicated that most resident Deferribacteres possessed the functional potential to contribute to nitrate reduction in the system. In sum, the dominance of nitrate-reducing Deferribacteres and the low relative abundance of Epsilonproteobacteria throughout the production facility suggested that the Deferribacteres play a major role in nitrate-induced souring control at high temperatures.

Novel high-rank phylogenetic lineages within a sulfur spring (Zodletone Spring, Oklahoma), revealed using a combined pyrosequencing-sanger approach

The utilization of high-throughput sequencing technologies in 16S rRNA gene-based diversity surveys has indicated that within most ecosystems, a significant fraction of the community could not be assigned to known microbial phyla. Accurate determination of the phylogenetic affiliation of such sequences is difficult due to the short-read-length output of currently available high-throughput technologies. This fraction could harbor multiple novel phylogenetic lineages that have so far escaped detection. Here we describe our efforts in accurate assessment of the novelty and phylogenetic affiliation of selected unclassified lineages within a pyrosequencing data set generated from source sediments of Zodletone Spring, a sulfide- and sulfur-rich spring in southwestern Oklahoma. Lineage-specific forward primers were designed for 78 putatively novel lineages identified within the pyrosequencing data set, and representative nearly full-length small-subunit (SSU) rRNA gene sequences were obtained by pairing those primers with reverse universal bacterial primers. Of the 78 lineages tested, amplifiable products were obtained for 52, 32 of which had at least one nearly full-length sequence that was representative of the lineage targeted. Analysis of phylogenetic affiliation of the obtained Sanger sequences identified 5 novel candidate phyla and 10 novel candidate classes (within Fibrobacteres, Planctomycetes, and candidate phyla BRC1, GN12, TM6, TM7, LD1, WS2, and GN06) in the data set, in addition to multiple novel orders and families. The discovery of multiple novel phyla within a pilot study of a single ecosystem clearly shows the potential of the approach in identifying novel diversities within the rare biosphere.

Toluene depletion in produced oil contributes to souring control in a field subjected to nitrate injection

Souring in the Medicine Hat Glauconitic C field, which has a low bottom-hole temperature (30 °C), results from the presence of 0.8 mM sulfate in the injection water. Inclusion of 2 mM nitrate to decrease souring results in zones of nitrate-reduction, sulfate-reduction, and methanogenesis along the injection water flow path. Microbial community analysis by pyrosequencing indicated dominant community members in each of these zones. Nitrate breakthrough was observed in 2-PW, a major water- and sulfide-producing well, after 4 years of injection. Sulfide concentrations at four other production wells (PWs) also reached zero, causing the average sulfide concentration in 14 PWs to decrease significantly. Interestingly, oil produced by 2-PW was depleted of toluene, the preferred electron donor for nitrate reduction. 2-PW and other PWs with zero sulfide produced 95% water and 5% oil. At 2 mM nitrate and 5 mM toluene, respectively, this represents an excess of electron acceptor over electron donor. Hence, continuous nitrate injection can change the composition of produced oil and nitrate breakthrough is expected first in PWs with a low oil to water ratio, because oil from these wells is treated on average with more nitrate than is oil from PWs with a high oil to water ratio.