The influence of oxidative degradation on the preparation of chitosan nanoparticles

Unlocking Agronutrient Resources: Sorption Strategies for sugar-energy industry waste

Vinasse and ash from sugarcane bagasse (SCB) are key byproducts in the sugar-energy industry. Vinasse is nutrient-rich but environmentally challenging, while sugarcane bagasse ash (SCBA) offers excellent adsorbent for treating effluents. This work aims to assess the effectiveness of SCBA in removing nitrogen (N) and potassium (K) nutrients from Vinasse. Simulated standard solutions of K2SO4 and (NH4)2HPO4 were used to mimic the nutrient concentrations in Vinasse and optimize experimental parameters such as adsorbent mass and contact time. Kinetic and isotherm models were also applied to elucidate the underlying adsorption mechanisms. Structural, morphological, and thermal analyses revealed the micro-mesoporous and heterogeneous nature of SCBA, primarily composed of SiO2 (quartz and cristobalite). The sorption assessment indicated the ideal conditions involved lower SCBA masses (2.5 g) and 6 h of contact time for the simulated standard solutions. The replicated conditions for Vinasse (at an adjusted sorption time of 24 h) demonstrated nutrient sorption and pH correction of the Vinasse, attributed to the alkaline nature of SCBA. Analysis of the sorption kinetic models for K+ and NH4+ revealed that SCBA interacts diffusively with the environment, not necessarily controlled by adsorption on active sites, indicating non-uniform characteristics. The sorption isotherms for K+ and NH4+ showed the non-linearized Freundlich model was the most suitable, indicating the adsorption sites with varying energy levels and a multilayer sorption process. In conclusion, we successfully demonstrated the sorption of nutrients from Vinasse by SCBA, enhancing the value of these residues and mitigating their environmental impact when used in agricultural applications.

Electrochemically addressed FET-like nanofluidic channels with dynamic ion-transport regimes

Nanofluidic channels in which the ionic transport can be modulated by the application of an external voltage to the nanochannel walls have been described as nanofluidic field effect transistors (nFETs) because of their analogy with electrolyte-gated field effect transistors. The creation of nFETs is attracting increasing attention due to the possibility of controlling ion transport by using an external voltage as a non-invasive stimulus. In this work, we show that it is possible to extend the actuation range of nFETs by using the supporting electrolyte as a "chemical effector". For this aim, a gold-coated poly(ethylene terephthalate) (PET) membrane was modified with electroactive poly-o-aminophenol. By exploiting the interaction between the electroactive poly-o-aminophenol and the ions in the electrolyte solution, the magnitude and surface charge of the nanochannels were fine-tuned. In this way, by setting the electrolyte nature it has been possible to set different ion transport regimes, i.e.: cation-selective or anion-selective ion transport, whereas the rectification efficiency of the ionic transport was controlled by the gate voltage applied to the electroactive polymer layer. Remarkably, under both regimes, the platform displays a reversible and rapid response. We believe that this strategy to preset the actuation range of nFETs by using the supporting electrolyte as a chemical effector can be extended to other devices, thus offering new opportunities for the development of stimulus-responsive solid-state nanochannels.

Nanoparticles in sustainable agriculture: An emerging opportunity

Conventional agriculture often relies on bulky doses of fertilizers and pesticides that have adversely affected the living beings as well as the ecosystems. As a basic tenet of sustainable agriculture, minimum agrochemicals should be used so that the environment can be protected and various species can be conserved. Further, sustainable agriculture should be a low input system, where the production costs are lower and net returns are higher. The application of nanotechnology in agriculture can significantly enhance the efficiency of agricultural inputs and thus it offers a significant way to maintain sustainable development of agroecosystems via nanoparticles. In this regard, nano-plant growth promoters, nanopesticides, nanofertilizers, nano-herbicides, agrochemical encapsulated nanocarrier systems etc. have been developed for the potential applications in agriculture. These can have great benefits for agriculture, including higher production of crops, inhibition of plant pathogens, removal of unwanted weeds and insects with lesser cost, energy and waste production. However, there are several concerns related to the use of nanoparticles in agriculture. These include the approaches for synthesis, their mechanisms of penetration to applied surfaces and the risks involved. Though, advent of new technologies has significantly improved the synthesis and application of nanomaterials in agriculture, there are many uncertainties regarding nano-synthesis, their way of utilization, uptake and internalization inside the crop cells. Therefore, an elaborate investigation is required for deciphering the engineered nanomaterials, assessing their mechanistic application and agroecological toxicity. Hence, this review is aimed to critically highlight the NPs material application and points towards the vital gaps in the use of nanotechnology for sustainable agriculture.

Adsorption removal of anionic dyes from aqueous solutions by chitosan nanoparticles deposited on the fibrous carrier

The synthesis, characterization and environmental application of chitosan based material stable in acidic media for adsorption of anionic dyes were investigated. The adsorption material is chitosan nanoparticles immobilized on a fibrous carrier (CPF). The choice of optimal conditions for the preparation of chitosan particles and their immobilization on a chemically activated polyethylene terephthalate (PET) fiber is justified. Immobilized nanoparticles showed high adsorption rates and dye binding capacity (300-1050 mg g^-1) depending on the dye type. Anionic phthalocyanine dyes having different molecular sizes, different nature and number of anionic groups were used as model adsorbates. The experimental isotherm data and a linear correlation coefficients (r_L² > 0.99) have shown that the dyes adsorption on CPF is best predicted by the Langmuir isotherm. The adsorption rate has been found to conform to pseudo-second-order kinetics with a good correlation (R² > 0.99) with intra-particle diffusion as one of the rate determining steps. It has been is established that the sorption rate and the limiting sorption capacity decrease with the increment in the dye molecule size. The process of adsorption of the dyes on the CPF is pH-insensitive in the pH range of 2-8. The adsorption saturated CPF could be effectively regenerated by a simple alkaline washing.

Enhancement of ciprofloxacin sorption on chitosan/biochar hydrogel beads

Biochar is effective in water treatment but it is hard to retrieve or separate biochar powder from aqueous solutions. In this study, the removal of ciprofloxacin from aqueous solutions was investigated using chitosan/biochar hydrogel beads (CBHB). The results showed that the adsorption rate was almost independent of the temperature and occurred at the homogeneous sites of adsorbent thus obeying the Langmuir model. The equilibrium time was varying for different initial concentrations and found to be 48 h for maximum one. The maximum sorption was found to be >76 mg/g of adsorbent out of 160 mg/L as initial concentration. Adsorption obeyed the second-order mechanism with leading role of intra-particle diffusion and outer diffusion. Adsorption capacity decreased from 34.90 mg/g to 15.77 mg/g in the presence of 0.01 N Na₃PO₄ whereas other electrolytes such as NaCl, Na₂SO₄, NaNO₃ with same concentration did not affect the sorption capacity. However, increased concentration of NaCl reduced the sorption capacity to some extent. CBHB showed a mixed mechanism by removing CIP through π-π electron donor-acceptor (EDA) interaction, hydrogen bonding and hydrophobic interaction. The reformation of CBHB with methanol and ethanol instead of water decreased its sorption capacity to 32.69 mg/g and 29.29 mg/g. Adsorption decreased by little after every regeneration of CBHB and was still >64 ± 0.68% (25.73 mg/g) after 6th regeneration. The efficacy of CBHB for CIP removal proved that CBHB is an economical and sustainable adsorbent.

Formulation of polysaccharide-based nanoparticles for local administration into the oral cavity

The efficacy of treatments for oral ailments is often challenged by a low residence time of the conventional pharmaceutical formulations in the oral cavity. The residence time in the oral cavity could be improved by using bioadhesive formulations, such as preparations based on polysaccharides. This study describes the formulation and the evaluation of polysaccharide-based nanosystems as drug delivery systems addressed to the oral cavity. Nanoparticles based on chitosan, alginate or pectin were prepared through self-assembly by ionotropic gelation using oppositely charged crosslinkers (tripolyphosphate or zinc). Characteristics of nanoparticles at increasing crosslinker concentration provided the basis for selecting the most suitable formulations. The nanoparticles were tested for cytotoxicity against buccal cells (TR146) and for stability in a medium simulating pH, ionic strength, electrolyte composition and concentration of saliva. Alginate nanoparticles were the most stable in the salivary environment, while chitosan nanoparticles were the most cytocompatible. Alginate nanoparticles and pectin nanoparticles revealed possible cytotoxicity due to the presence of zinc. This knowledge is important in the early design of polymer-based nanoparticles for oral usage and for potential improving of the biocompatibility of the investigated nanoparticles with the oral environment.

Poly(itaconic acid)-grafted chitosan adsorbents with different cross-linking for Pb(II) and Cd(II) uptake

Two novel chitosan (CS) adsorbents were prepared in powder form, after modification with the grafting of itaconic acid (CS-g-IA) and cross-linking with either glutaraldehyde (CS-g-IA(G)) or epichlorohydrin (CS-g-IA(E)). Their adsorption properties were evaluated in batch experiments for Cd(II) or Pb(II) uptake. Characterization techniques were applied to the prepared adsorbents as swelling experiments, TGA, SEM, XRD, and FTIR. Adsorption mechanisms were suggested for different pH conditions. Various adsorption parameters were determined as the effect of pH, contact time, and temperature. The maximum adsorption capacities for Cd(II) uptake were 405 and 331 mg/g for CS-g-IA(G) and CS-g-IA(E), respectively, revealing the capacity enhancement after grafting (124 and 92 mg/g were the respective values before grafting, respectively). A similar grafting effect was observed for Pb(II) uptake, proving its adsorption effectiveness on the CS backbone. The reuse of adsorbents was tested with 20 adsorption-desorption cycles.

Controlled release matrices and micro/nanoparticles of chitosan with antimicrobial potential: development of new strategies for microbial control in agriculture

The control of micro-organisms responsible for pre- and postharvest diseases of agricultural products, mainly viruses and fungi, is a problem that remains unresolved, together with the environmental impact of the excessive use of chemicals to tackle this problem. Current efforts are focused on the search for efficient alternatives for microbial control that will not result in damage to the environment or an imbalance in the existing biota. One alternative is the use of natural antimicrobial compounds such as chitosan, a linear cationic biopolymer, which is biodegradable, biocompatible and non-toxic, has filmogenic properties and is capable of forming matrices for the transport of active substances. The study of chitosan has attracted great interest owing to its ability to form complexes or matrices for the controlled release of active compounds such as micro- and nanoparticles, which, together with the biological properties of chitosan, has allowed a major breakthrough in the pharmaceutical and biomedical industries. Another important field of study is the development of chitosan-based matrices for the controlled release of active compounds in areas such as agriculture and food for the control of viruses, bacteria and fungi, which is one of the least exploited areas and holds much promise for future research.

Novel high-viscosity polyacrylamidated chitosan for neural tissue engineering: fabrication of anisotropic neurodurable scaffold via molecular disposition of persulfate-mediated polymer slicing and complexation

Macroporous polyacrylamide-grafted-chitosan scaffolds for neural tissue engineering were fabricated with varied synthetic and viscosity profiles. A novel approach and mechanism was utilized for polyacrylamide grafting onto chitosan using potassium persulfate (KPS) mediated degradation of both polymers under a thermally controlled environment. Commercially available high molecular mass polyacrylamide was used instead of the acrylamide monomer for graft copolymerization. This grafting strategy yielded an enhanced grafting efficiency (GE = 92%), grafting ratio (GR = 263%), intrinsic viscosity (IV = 5.231 dL/g) and viscometric average molecular mass (MW = 1.63 × 10⁶ Da) compared with known acrylamide that has a GE = 83%, GR = 178%, IV = 3.901 dL/g and MW = 1.22 × 10⁶ Da. Image processing analysis of SEM images of the newly grafted neurodurable scaffold was undertaken based on the polymer-pore threshold. Attenuated Total Reflectance-FTIR spectral analyses in conjugation with DSC were used for the characterization and comparison of the newly grafted copolymers. Static Lattice Atomistic Simulations were employed to investigate and elucidate the copolymeric assembly and reaction mechanism by exploring the spatial disposition of chitosan and polyacrylamide with respect to the reactional profile of potassium persulfate. Interestingly, potassium persulfate, a peroxide, was found to play a dual role initially degrading the polymers—“polymer slicing”—thereby initiating the formation of free radicals and subsequently leading to synthesis of the high molecular mass polyacrylamide-grafted-chitosan (PAAm-g-CHT)—“polymer complexation”. Furthermore, the applicability of the uniquely grafted scaffold for neural tissue engineering was evaluated via PC12 neuronal cell seeding. The novel PAAm-g-CHT exhibited superior neurocompatibility in terms of cell infiltration owing to the anisotropic porous architecture, high molecular mass mediated robustness, superior hydrophilicity as well as surface charge due to the acrylic chains. Additionally, these results suggested that the porous PAAm-g-CHT scaffold may act as a potential neural cell carrier.

Competitive adsorption of Pb(II), Cu(II) and Zn(II) onto xanthate-modified magnetic chitosan

The competitive adsorption of Pb(II), Cu(II) and Zn(II) onto a novel xanthate-modified magnetic chitosan (XMCS) was systematically investigated in single and ternary metal systems. In single system, equilibrium studies showed that the adsorption of Pb(II), Cu(II) and Zn(II) followed the Langmuir model and the maximum adsorption capacities were found to be 76.9, 34.5 and 20.8mg/g, respectively. In ternary system, the combined action of the metals was found to be antagonistic and the metal sorption followed the order of Pb(II)>Cu(II)>Zn(II); the Langmuir isotherm fitted the data of Pb(II) and Cu(II) well while the isotherm data of Zn(II) correlated well with the Freundlich model. The Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectra (XPS) studies showed that the thiol and amino group participated in the adsorption of Pb(II), Cu(II) and Zn(II).

Reactive and basic dyes removal by sorption onto chitosan derivatives

In this study, the removal of a reactive (Remazol Yellow Gelb 3RS) and a basic (Basic Yellow 37) dye from aqueous solutions was investigated using cross-linked chitosan derivatives as sorbents (either powder or beads), which have been grafted with carboxyl and amide groups. The sorption behavior of the materials was examined through equilibrium, kinetic and pH-edges experiments. The reuse of sorbents was affirmed by sequential sorption-desorption cycles. Three isotherms (Langmuir, Freundlich, and Langmuir-Freundlich) were used to fit the equilibrium data, while the pseudo-second order equation for the kinetic data. Chitosan powder presented higher sorption capacity than beads. Chitosan grafted with amide groups was found superior sorbent for reactive dye at pH 2 (Q(max)=1211 mg/g), while chitosan grafted with carboxyl groups for basic dye at pH 10 (Q(max)=595 mg/g). For both cases the optimum contact time was 4 h using 1 g/L sorbent. The characterization of sorbents was achieved by scanning electron microscopy, particle size analysis and FTIR spectroscopy.

Adsorption of bovine serum albumin on template-polymerized chitosan/poly(methacrylic acid) complexes

Particulate systems composed of polyelectrolyte complexes (PEC) based on chitosan and poly(methacrylic acid) were obtained via template polymerization. The resultant particles were characterized as having regions with different charge densities: chitosan predominating in the core and poly(methacrylic acid) at the surface, the particles being negatively charged, as a consequence. Albumin was adsorbed on these particles (after cross-linking with glutardialdehyde), and pH was controlled to obtain two conditions: (i) adsorption of positively charged albumin and (ii) adsorption of albumin at its isoelectric point. Adsorption isotherms and zeta-potential measurements showed that albumin adsorption was controlled by hydrogen bonding/van der Waals interactions and that brush-like structures may enhance the adsorption of albumin on these particles. It was also found that shearing can induce desorption of albumin from the PEC surface, depending on the continuous phase albumin concentration.